Package Not Finding Xml Configuration File

Nov 26, 2007

Hi,

I'm having difficulty configuring a package to look for an xml configuration file that contains values for source/destination connection strings.

The goal is to be able to have a package and its configuration file on one file system and to be able to copy/move the file dtsx and dtsx.config between build/staging/production servers while only having to set the xml value for the source/destination configurations.


In the package, I've created an xml configuration file called zzz.config. I took the absolute path out of the location of the xml file so that I have
xml location = zzz.config
instead of
xml location = e:ssiszzz.config
I'm assuming that when it gets to the point of validating the location of that file, it starts by looking in the current directory where the package is found.

All is well as long as I execute the package through the execute package utility by double clicking on the package file.

The problem lies when configuring a job in the sql server agent, it doesn't seem to pick up the xml configuration values because its pointing to the old server and not the current server stored in the xml file. I'm assuming its because the current directory is not the package directory at this point.


How can I get around this? Do I have to move the xml config file (zzz.config) to another directory where the agent will look for?

I know I could configure this as an environment variable but this contradicts the point of having movable packages without any extra tweaks.

Any help would be appreciated.

Thanks,

Robin

View 4 Replies


ADVERTISEMENT

Passing The Xml Configuration File To The Package As An Input Parameter While Executing The Package

Feb 2, 2007

Hi,

I am planning to develop a single package that will download files from ftp server, move the files to internal file server and upload it in the database. But I want to run this package for multiple ftp file providers. For each provider the ftp server might be different and the transformation to upload the files into a database table might be different.

So can I create a single package and then multiple configuration files (xml), which will contain the details fo the ftp file providers and then pass the xml file as a parameter while executing the package. The reason being that the timings of fetching the files is different for each ftp file provider and hence cannot be combined into one.

Is this possible?

Thanks for your help.

$wapnil

View 6 Replies View Related

Configure A Child Package To Use The Configuration File Of A Parent Package?

Sep 14, 2006

Hi guys,

Here's the deal. I have a child package, (say, pack01.dtsx), which uses a dtsconfig file for its connection string, which can be called from other packages, but which also can be called by itself.

However I also have another package (say, pack02.dtsx) which uses the same dtsconfig file for its connection string. It calls on pack01.dtsx.

When I use DTEXECUI and run pack01.dtsx, specifying the proper .dtsconfig file, it goes well. But when I try and run pack02.dtsx, an error occurs saying pack01.dtsx connection cannot be established.

How do I pass the connectionstring being used by pack02 to pack01, without having to remove the configuration file setting of pack01? Can a Parent Package configuration and a configuration file try and map to the same property?

Hope someone could help. Thanks.

View 7 Replies View Related

Package Configuration With XML File

Aug 30, 2006

Hi,

I have about 40 packages in my job. One of the problems that I have encoutered is that I don't know how I could use same XML dtsconfig file for all of my files. Each SSIS calls different file.

The XML dtsconfig file is a replacment for my *.ini file in sql 2000. The dtsconfig file will hold paths to all different files. Each SSIS will take different file name at a runtime.

How can I have all the files paths in one dtsconfig file - and is it even possible to do that in SSIS?

Any help greatly appreciated....Thank you,

Maria

View 2 Replies View Related

Package Configuration Using Xml-file Fails

Jun 29, 2006

Hallo,

I use SSIS Version 9.00.1399.00 and keep getting problems trying to use package configuration.



I choose xml configuration file as type and browse a path on our LAN to create te configuration file .

Then I select the properties of a OLEDB communication manager as Properties to Export

Doing so I obtain this configuration:Name:
JACBE_IF_CONFIG

Type:
Configuration File

New configuration file will be created.

File name:
L:ProjectsVinciSSISDVLFMC loader ImportFMC Loader ImportFMC Loader ImportJACBE_IF_CONFIG.xml

Properties:
Package.Connections[JACBE_IF].Properties[UserName]
Package.Connections[JACBE_IF].Properties[ServerName]
Package.Connections[JACBE_IF].Properties[RetainSameConnection]
Package.Connections[JACBE_IF].Properties[ProtectionLevel]
Package.Connections[JACBE_IF].Properties[Password]
Package.Connections[JACBE_IF].Properties[Name]
Package.Connections[JACBE_IF].Properties[InitialCatalog]
Package.Connections[JACBE_IF].Properties[Description]
Package.Connections[JACBE_IF].Properties[ConnectionString]

The system creates a XML file but when I run the package I get the following error in the output pane.
Information: 0x40016041 at FMC_People: The package is attempting to configure from the XML file "L:ProjectsVinciSSISDVLFMC loader ImportFMC Loader ImportFMC Loader ImportJACBE_IF_CONFIG.xml".
SSIS package "FMC_People.dtsx" starting.
Information: 0x4004300A at Dataprocessing_PEOPLE, DTS.Pipeline: Validation phase is beginning.
Error: 0xC0202009 at FMC_People, Connection manager "JACBE_IF": An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
Error: 0xC020801C at Dataprocessing_PEOPLE, FMC_ARE_PRESENT_destination 1 [22338]: The AcquireConnection method call to the connection manager "JACBE_IF" failed with error code 0xC0202009.
Error: 0xC0047017 at Dataprocessing_PEOPLE, DTS.Pipeline: component "FMC_ARE_PRESENT_destination 1" (22338) failed validation and returned error code 0xC020801C.
Error: 0xC004700C at Dataprocessing_PEOPLE, DTS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Dataprocessing_PEOPLE: There were errors during task validation.
SSIS package "FMC_People.dtsx" finished: Failure.

I don't get it. Where do I go wrong?

I tried the same with a DtsConfig file instead of an XML but to no avail. the way of working as described in BOL and in the book professional SQL SERVER 2005 Integration service seems to me perfectly similar.

Any ideas anyone? I would be most gratefull.

Kind regards,



Paul Baudouin

View 10 Replies View Related

Mapping Between Configuration File And Package

Dec 11, 2007



Hi,


does anybody know where is stored information about belonging a certain configuration file to a package?
How can I connect a configuration file with an installed package without using SSISDeployment wizard?

Thank for advise

Jana

View 8 Replies View Related

My Package Does Not Take The Values Configured In The Configuration File.

Jan 29, 2007

Hi all,

I created a simple file system task to copy a file from one location to another on my local system.

I used variables to specify the source and destination paths and now in my configuration file if I configure the values to something else also the package is taking the initial default values and not the values specified in the configuration file.

Can anyone throw some light on this.

Thanks in advance.

View 4 Replies View Related

Reading A .dtsx File's Package Configuration In VB.NET

Jan 10, 2008

So I've seen articles outlining how to execute a package in VB and how to pass variables along to the package, which is great.

But I'm wanting write a VB.NET app that will read the xml in a .dtsx package, looking for the available variables (and datatypes) that need to be passed to the package to configure it properly. Anyone done this? Is it best to use parent package variables? Or another type of configuration?

When looking at the xml of a .dtsx file, I can see a variables section that could be parsed... is there anything letting me know what is required versus optional? How do I know the datatype that I need to pass? Any help would be appreciated...

View 22 Replies View Related

SSIS Package Configuration File Malformed

Jan 24, 2008

Can someone identify what is wrong with the XML config file that I i'm using with a SSIS package? The XML file was created by Visual Studio tool




Code Snippet
<DTSConfiguration>
<DTSConfigurationHeading>
<DTSConfigurationFileInfo GeneratedBy="BRIDGENETjpacella" GeneratedFromPackageName="SsisEndBatch" GeneratedFromPackageID="{91A1941E-E066-47F7-8DD4-9E260F38741D}" GeneratedDate="1/21/2008 4:35:22 PM" />
</DTSConfigurationHeading>
<Configuration ConfiguredType="Property" Path="Package.Connections[CHI-DEV02.BNETDB2].Properties[InitialCatalog]" ValueType="String">
<ConfiguredValue>BNETDB2IMPORTTEST</ConfiguredValue>
</Configuration>
<Configuration ConfiguredType="Property" Path="Package.Connections[CHI-DEV02.BNETDB2].Properties[ServerName]" ValueType="String">
<ConfiguredValue>CHI-DEV02</ConfiguredValue>
</Configuration>
<Configuration ConfiguredType="Property" Path="Package.Connections[CHI-PROD01.BNETDB2].Properties[InitialCatalog]" ValueType="String">
<ConfiguredValue>BNETDB2</ConfiguredValue>
</Configuration>
<Configuration ConfiguredType="Property" Path="Package.Connections[CHI-PROD01.BNETDB2].Properties[ServerName]" ValueType="String">
<ConfiguredValue>CHI-FILE01</ConfiguredValue>
</Configuration>
<Configuration ConfiguredType="Property" Path="PackageRun Report Executor.Properties[Executable]" ValueType="String">
<ConfiguredValue>C:ReportsReportProgramCHI_FILEBridgeNet.Reporting.ExecuteConsole.exe</ConfiguredValue>
</Configuration>
<Configuration ConfiguredType="Property" Path="PackageRun Report Executor.Properties[WorkingDirectory]" ValueType="String">
<ConfiguredValue>C:ReportsReportProgramCHI_FILE</ConfiguredValue>
</Configuration>
</DTSConfiguration>





When I run the pacakge, this is what happens:


Started: 10:48:56 AM
Info: 2008-01-24 10:49:02.92
Code: 0x40016041
Source: SsisEndBatch
Description: The package is attempting to configure from the XML file "C:Program Files (x86)Microsoft SQL Server90DTSPackagesBridgeNet.BI.SSIS.EndBatc
ENDBATCH TEST ENV.dtsConfig".
End Info
Warning: 2008-01-24 10:49:03.15
Code: 0x80012011
Source: SsisEndBatch
Description: Cannot load the XML configuration file. The XML configuration file may be malformed or not valid.
End Warning


View 6 Replies View Related

Absolute Path For Package Configuration File

Oct 2, 2007

We are facing some issues with SSIS and thought if you could be of some help.

Actually, instead of Deploying our SSIS projects we copy the SSIS files to a different server from where we execute the SSIS Packages. The reason being, we have a Core Version of the application and this is deployed to different markets and subsequent customisations are performed in the market specific version of the Packages. The problem is although we have a Package Configuration Xml File for our Connection object, the first time when we copy the Packages, we have to manually open each of the Package and change the URL of the Xml File for Configuration. I read through some of the articles on the internet and came to know that the Package Configuration does not support relative path and only absolute path is possible.

Can you please share some of your suggestions on the above problem.

View 6 Replies View Related

XML Package Configuration File Not Added Into Sourcesafe

Jan 16, 2008



Hi,

I've added an XML package configuration file to my SSIS package and it appears to be working fine.

The XML file is located in the same folder as the solution file.

I've recently added the entire solution to Visual Sourcesafe 2005, and I achieved this by doing the following:

1. Right-clicked on the Project name in the solution explorer and selected "Add to source Control".
2. When prompted, provided my Sourcesafe login credentials and clicked "OK"
3. Accepted the default VSS project name and clicked "OK"
4. Clicked "Yes" to allow VSS to create a new project

Problem: The XML configuration file hasn't be added to sourcesafe along with rest of the solution.

I'm able to add the file manually myself, but this doesn't seem right to me. Am I missing something? Should the config file show as part of the Solution in Visual Studio 2005?

Any answers/help would be appreciated greatly.

Thanks

Jon Derbyshire

View 4 Replies View Related

Integration Services :: Package XML Configuration File Once Checked Into TFS

Jul 29, 2015

I've used XML package configuration in my packages in order to populate key variables. The configuration String is pointing to a local folder in my machine. After that, I've checked my whole solution into TFS.  I did check the checked in file but could not find the .dtsConfig XML file.  The problem occurs when the other teammate checked out this solution from TFS into his own box. When he tried to open the solution, it gives warning (not error though) saying it could not find the package configuration file.machine does not have the same URL I had in my  box.   In situation like this, how can we fix in the multi-developers SSIS environment?

View 2 Replies View Related

Reusing Package Configuration File Across All Packages In A Solution?

Oct 26, 2005

I have 5 packages in a solution.

View 19 Replies View Related

How To Use Deployment Utility Using A Single Package Configuration File

Jan 22, 2007

Hi,

We are trying to create a deployment utility for a solution. The issue we are facing is, we are using a single package configuration file and when we try to build the solution to create the deployment utility, the build process fails saying that the package configuration file already exists. THe reason for this is while trying to build, the utility copies the configation fiel for the packages, it copies for one, but for the second onward, when it tries to copies, it fails saying the file already exists.



Any idea how to overcome this, or else any suggestions how to perform the similar steps to create a deployment utility for a solution in which the packages share a single package configuration file.

Any suggestion would be really appreciated.



Thanks in Advance,

Manish Singh

View 5 Replies View Related

Single Configuration File - Mulitple Packages - Elements Not Used In Each Package

Dec 18, 2007

Hi,

I'm fairly new to the SSIS world, and I've recently ported a bunch of dts packages over to SSIS. I'm an ASP.NET developer so I'm very familiar with the capabilities that configuration files give you, and I attempted to set up my solution as follows:

All of my "Data Sources" are at the project level, and added (with the same name) to each package. I wanted to have a single config file that had all of the project-level settings (i.e. connection strings, data file paths, etc). I then have a config for each package with the package level settings - i.e. variables, etc.

The problem becomes that all packages do not use all data sources. This results in an error when I try to open up a package for editing, it complains that it doesn't have a reference to data source XYZ that it is seeing in the configuration file.

Is there any way that I can get around this? If I have a password to a database change, I don't want to have to look through every config file and change it in multiple places.

View 4 Replies View Related

Package Configuration File Issue - Relative Path Not Recognized In VS2005

Feb 7, 2008

I have been reading through different posts about how to manage SSIS configuration files across multiple environments. I have seen a few that mention a solution that turns out not to really work (or maybe I€™m doing something wrong); which is what I hope to find out here.

Solutions I am working with:
1: Put the XML Configuration file in the same directory as the SSIS package and only specify the config file name when setting it up in the package. I do not specify a path to the XML Configuration file, just the config file name.

ISSUE: This works when I first create the package and test it without closing down visual studio. Even after deploying the SSIS package and the config file and moving it between environments it works as long as the working directory of the DTExec command is the same directory as the SSIS package and configuration files. The problem comes in after I have closed Visual Studio and opened it again and loaded up the SSIS package. It then gives a bunch of errors stating that it can€™t locate the configuration files€¦. If I could fix this issue, then this would be a solution that I could live with. (I would much rather use a relative path to a different directory but I€™ll live with what I can get). Can anyone solve the issue of Visual Studio 2005 not recognizing the location of the configuration files when only the configuration file name, and not the path is specified?

-- The other odd thing is that I have been able to get this to work consistently with some of my packages but not others. I'm not sure what I did to get those packages to recognize the location of the xml config file.

Thank you in advance for any input and help.

View 27 Replies View Related

Package Configuration Wizard:-SQL Configurations Configuration Filter Not Working

May 23, 2006

Hi --I was wondering if this is a bug when I add new data in my table SSIS Confiurations and give wizard a new Configuration filter the package configuration wizard can not see the new values --the old values from the previous configuration are still showing---is there any known workaround or forced refresh I can do

thanks in advance Dave

Background:

SQL Package Configurations are most important because they provide the possibility of a central configuration store for your entire enterprise!!!!!!!! and is in my mind the only way to go

http://sqljunkies.com/WebLog/knight_reign/archive/2005/01/24/6843.aspx



Wizard results:

Name:
ETL

Type:
SQL Server

Connection name:
ETLConfiguration

Any existing configuration information for selected configuration filter will be overwritten with new configuration settings.

Configuration table name:
[dbo].[SSIS Configurations]

Configuration filter:
PT_CUST_ABR

Target Property:
Package.Variables[User::gsPreLoad].Properties[Value]
Package.Variables[User::gsPostLoad].Properties[Value]
Package.Variables[User::gsLoad].Properties[Value]
Package.Variables[User::gsFlatFilename].Properties[Value]
Package.Variables[User::gsFileName].Properties[Value]
Package.Variables[User::gsCDOMailTo].Properties[Value]
Package.Variables[User::gsCDOMailSubject].Properties[Value]
Package.Variables[User::giRecordCount].Properties[Value]
Package.Variables[User::giFileSize].Properties[Value]
Package.Variables[User::giBatchID].Properties[Value]
Package.Variables[User::gdFileDateCreated].Properties[Value]
Package.Connections[MyDatabase].Properties[ServerName]
Package.Connections[MyDatabase].Properties[InitialCatalog]





USE [ETLConfiguration]
GO
/****** Object: Table [dbo].[SSIS Configurations] Script Date: 05/23/2006 13:34:35 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[SSIS Configurations](
[ConfigurationFilter] [nvarchar](255) COLLATE Latin1_General_CI_AS NOT NULL,
[ConfiguredValue] [nvarchar](255) COLLATE Latin1_General_CI_AS NULL,
[PackagePath] [nvarchar](255) COLLATE Latin1_General_CI_AS NOT NULL,
[ConfiguredValueType] [nvarchar](20) COLLATE Latin1_General_CI_AS NOT NULL
) ON [PRIMARY]

View 3 Replies View Related

Finding Out Database Configuration

Jun 12, 2003

Hi,

I'm new to SQL 2000 administration and would like to know how to find out what the existing SQL Server Database configurations and what installation options has been installed / selected.

Thanks

Murras68

View 1 Replies View Related

SSIS Package Foreach Loop Container - For Each File Enumerator - Ger Enumerator Configuration From Variable

Apr 21, 2008



Hello

I am trying to use Foreach loop container - Foreach File Enumerator

Is there easy way to retrieve enumerator configuration folder from variable - so I can easily move package from server to server?

I would like to have name of the folder we getting files from retrieved from variable by using this control

Thank you in advance
Armine Bell

View 3 Replies View Related

Report With SSIS Package Having Indirect Package Configuration Setup

Sep 10, 2007

Deployed Report having SSIS package as source do not work when Indirect Package configuration is used in ETL package. It seems ETL package when called/executed from Report manager does not recognize environment variable to pick up the dtsconfig file.

The Report works when Direct package configuration is used to same dtsconfig file.

What could be the reason? Any solution for this? This will cause our build/deployment to QA and Prod very difficult.

View 1 Replies View Related

SQL Server Admin 2014 :: Finding A Table Where Maintenance Clean Up Task Configuration Is Stored?

Jul 2, 2014

I am looking for a table where Maintenance Clean Up Task configuration is stored. For example, Delete file older than the following - which is 2 days. Which table can I retrieve the setting in msdb ?

View 5 Replies View Related

Configuration For Configuration Package? Is This Possible?

Mar 6, 2006

Hi Guys,

Here's the current scenario:

I am creating a windows application to manage my ssis packages.

My SSIS packages use package configurations, and by default connect to the "SSIS Configurations" table in sql server.

However, I want it to connect to a view instead of this table, so i create a view "vwSSIS_Configurations" and point the package configuration to use the view in sql server.

The application SHOULD be capable of altering the package configuration's configuration and switch its connection between the default "ssis configurations" table, and the view.

Is this possible? I cannot think of a way which I can have my application switch the package configuration's connection.

Thanks,
kervy

View 3 Replies View Related

SQL Server Agent Not Finding The Package To Run

Nov 2, 2006

Hi, I have been searching through the posts hoping to find an answer to my problem. Most errors and problems seem to deal with Agent not being able to run packages because of permission issues.

My problem has to do with SQL Server Agent not finding the package to run. I have a proxy with a high enough level of permissions (SqlAgentOperatorRole).

The error message I get is:

Executed as user: ___/____. The package could not be found. The step failed.

The package is in a folder on our network. When I create the step I use the browser to go find and select the package. So why does it not find it at runtime? I can run it manually

My group is using 2005 for the first time. Any help you can provide would be very much appreciated.

Ricardo

View 8 Replies View Related

Configuration Package

Aug 8, 2007

I have created a package configuration to read the connectionstring for the oledb connection manager.

Saved the file as Environment.dtsConfig in the same directory as the other packages.

Do the packages refer to the configuration file automatically?

Does it make a difference if I use the dtexec to start the ssis packages since there is now a configuration file?



Thanks

View 4 Replies View Related

Package Configuration Please Help

Mar 29, 2007



I would like to set package configuration.But dont know how to.

What i want to achieve is that i want to change connections based on test ,development and production environment of the same package...



How can i do that without me changing the connections manually to each task based on environment..

using package configuration i dont know how to...Please let me know.

View 17 Replies View Related

Package Configuration

Apr 5, 2006

Hello,

I'm developing some packages in SSIS and I need to implement a configuration file to load the server's connections and other parameters, so I can use this same connection for all packages.

Have anyone a step by step to perform this configuration ?

I exported a Connection Manager to a .dtsConfig file, but I don't know how to use this config file.

Any help is welcome !

Thanks,

Guber

View 1 Replies View Related

Package Configuration

Oct 3, 2006

Here is the scenario we are
trying to use; (it a bit long winded please bare with me)



There are 2 Packages Parent
and Child. Both have 2 Connection Managers (€œConfiguration€? & €œData Connection€?).
The €œData Connection€? has an invalid connection set to start with this is so
that we can deploy this to multiple places and use a SQL table to hold the
configuration.




At runtime €œConfiguration€? is
set to a valid SQL2005 database connection via the command line or in BI but €œData
Connection€? is left invalid.




The Package Configuration point
to an SQL server using €œConfiguration€? this has the connection string for the €œData
Connection€? Connection Manager (a valid connection string). The package errors
with can not acquire connection.




The first task is to put the
Connection string of the Connection manager €œConfiguration€? in to a variable.
Then the child package is called.




The Child package has the same
2 connections €œConfiguration€? & €œData Connection€? both are Invalid at this
time.




1) We use the Package
Configuration to populate a variable from the parent package which holds the €œConfiguration€?
connection string.

2) We use a Package
Configuration to populate then Configuration€? connection from the parent
package which holds the €œConfiguration€? connection.

3) We use a Package
Configuration to populate the €œData Connection€? Connection Manager using the €œConfiguration€?
connection. Which should be Set via step 2 here.




The First task on the child
package has a bit of script to check all the connection manager return a valid
connection to make sure database are up and running before connection. This
fails at the moment return in an error.




We want to use the same code
in multiple environments and as such don€™t want to make code changes that are really
only environment changes.

IE connection string to
servers. I can€™t seem to see anything saying we are doping anything wrong but if
the connections are all set to a valid connection before running this seems to
work. When invalid connection are used this seems to fall over.

View 1 Replies View Related

Package Configuration

Aug 8, 2007

I have created a package configuration to read the connectionstring for the oledb connection manager.
Saved the file as Environment.dtsConfig in the same directory as the other packages.
Do the packages refer to the configuration file automatically?
Does it make a difference if I use the dtexec to start the ssis packages since there is now a configuration file?

Thanks

View 1 Replies View Related

Package Configuration

Aug 10, 2007



Does it matter if the configuration is by xml,sql server,parent package variable,environment variable etc.

I use xml configuration which i kind of feel easy as i can change the connection directly by typing.Not used with others much..

Is there any security issue here .
Please let me know

View 5 Replies View Related

Package Configuration With XML

Sep 14, 2006

Hi,

i am haveing package which is devloped in BIDS and i am executing the package from DotNet (Windows Application C#).during development my package is pointed to Server1,Database1.when we move the package to another test environment for a different server and database (Server2,Database2). we are giving the connection string details in dtsConfig file .but  Package is not takeing the new connection string instead its takeing the old connection string (design time connection) and throwing error.what could be the problem

Invoking Code (C#)

--------------------

            btn_SaExecute.Enabled = false;
            string pkgLocation;
            Package pkg;
            Microsoft.SqlServer.Dts.Runtime.Application app;
            DTSExecResult pkgResults;

            pkgLocation = "D:JeganSSIS PrjsInvokeTestInvokeTestData1.dtsx";   

            app = new Microsoft.SqlServer.Dts.Runtime.Application();

            pkg = app.LoadPackage(pkgLocation, null);
            pkg.EnableConfigurations = true;
            pkgResults = pkg.Execute();


Data.dtsConfig

----------------------

<?xml version="1.0"?><DTSConfiguration><DTSConfigurationHeading>
 <DTSConfigurationFileInfo GeneratedBy="PSLSDCJegan.thangadurai" GeneratedFromPackageName="Data1" GeneratedFromPackageID="{30ACE86F-D0D3-4575-AD46-2E9C2F34D46B}" GeneratedDate="9/14/2006 12:54:01 PM"/>
</DTSConfigurationHeading>
 <Configuration ConfiguredType="Property" Path="Package.Connections[XXXX.YYYY].Properties[ConnectionString]" ValueType="String">
 <ConfiguredValue>Data Source=XXX;User ID=XXX;Password=XXX;Provider=MSDAORA.1;Persist Security Info=True;
 </ConfiguredValue>
 </Configuration>
</DTSConfiguration>

Thanks

Jegan

View 1 Replies View Related

SQL Configuration Package - C# App

Sep 1, 2006

Hi all,

Hopefully a simple question. In my c# application i can call ImportConfigurationFile(<str>) to import an xml configuration file. How do i go about importing configuration settings from a SQL configuration package? I have created this but see no way to load it. I'd prefer to use the config file created in the SQL database.

Any help would be most appreciated.

Many thanks,

Grant

View 1 Replies View Related

Package Configuration

Oct 17, 2006

Hi all of us,

I'm looking any .dtsconfig file as sample for my first package configuration. I've got ssis packages which might be updated on development and then moved to production. First of all, I'd like dynamically change the connections but I don't know exactly how to do that. I'm taking a look on the wizard but when I choose a Sql Server request me a table.

Any sample or link for that would be welcomed!

TIA

View 2 Replies View Related

Package Configuration - XML

Aug 25, 2006

Type:
 Configuration File

New configuration file will be created.

File name:
 C:Test.dtsconfig

Properties:
 Package.Connections[Flat File Connection Manager].Properties[ConnectionString]


 

------------------------------------

 

So lets say, I modify the connectionstring for the Flat File connection manager by editing the xml file. Next time, I run the package, it does not grab the new value. Am I misunderstanding the concept  of Package Configuration?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved