Parametized Inserts In A Loop
Mar 12, 2006
Hi,
I have a for next loop that I am using to write some data into a table.
The problem I have is one of the fields is an @parameter
The relevant bit of VB.net code is:
Dim
dbpm_theDateTime
As System.Data.IDataParameter =
New System.Data.SqlClient.SqlParameter
dbConnection.Open()
For intCounter
As
Integer = 0
To ds.Tables(0).Rows.Count - 1
querystring =
"Insert into tblActionsToDo ([TheDT], [username]) VALUES (@theDateTime, '" & username &
"’)�
dbpm_theDateTime =
New System.Data.SqlClient.SqlParameter
dbpm_theDateTime.ParameterName =
"@theDateTime"
dbpm_theDateTime.Value = tmpstrDT
dbpm_theDateTime.DbType = System.Data.DbType.DateTime
dbCommand.Parameters.Add(dbpm_theDateTime)
dbCommand.CommandText = querystring
rowsAffected = dbCommand.ExecuteNonQuery
Next
The first time through the for next loop, everything works fine. The next time though I get an error that @theDateTime has already been defined. To be fair, it is true; but how do I get round this? I've tried making the @parameter a string so that I can manipulate it as "@parameter" & intcounter, and thus have a uniquely-named varaible for every loop, but it doesn't work.
thanks for any pointers
View 1 Replies
ADVERTISEMENT
Jan 20, 2006
I have a table with a series of rows for period 1 - these always exist
drop table tblmain
create table tblmain (period int, rfreq int, pfreq int)
insert tblmain (period , rfreq , pfreq )
select 1 , 1 , 1
union all
select 1 , 1 , 3
union all
select 1 , 1 , 6
union all
select 1 , 3 , 3
union all
select 1 , 3 , 6
union all
select 1 , 6 , 6
union all
select 1 , 6 , 12
select * from tblmain
period rfreq pfreq
1 1 1
1 1 3
1 1 6
1 3 3
1 3 6
1 6 6
1 6 12
*/
I need to do a whole lot of inserts with incremented period values up to and including
a number assigned in a different table, FMaxes based on JOINing the two tables on the rfreq column
CREATE TABLE FMaxes (RFreq INT , MaxFINT)
insert FMaxes (RFreq , MaxF)
select 1 , 5
union all
select 3 , 3
union all
select 6 , 2
select * from FMaxes
RFreq MaxF
1 5
3 3
6 2
Ive been scratching my head for hours trying to figure out a set-based approach rather than a loop
solution which I could produce
The desired result would be inserts from period 2 onwards - result set below
select * from tblmain
period rfreq pfreq
1 1 1
1 1 3
1 1 6
1 3 3
1 3 6
1 6 6
1 6 12
2 1 1
2 1 3
2 1 6
2 3 3
2 3 6
2 6 6
2 6 12
-- no period 3 or higher for rfreq value 6 because table FMaxes holds an MaxF value of 2 etc
3 1 1
3 1 3
3 1 6
3 3 3
3 3 6
-- no period 4 or higher for rfreq value 3 because table FMaxes holds an MaxF value of 3 etc
4 1 1
4 1 3
4 1 6
5 1 1
5 1 3
5 1 6
Thanks in advance
View 4 Replies
View Related
Aug 14, 2007
Hi
I have a SSIS package that imports data into a staging table from an excel sheet (This works fine). From the staging tabler i want it to insert the values into my members table, take that unique indentityID that gets created and insert the other values into other tables for that member that was just created.
In the staging table, i have all the values for a single member. But the structure of the database needs all the values inserted into seperate tables. There is no conditions ID in my members table, so the member first has to be created and from there i need to use the newly created member's MemberID and insert the conditions into a seperate table using the MemberID
I have created some sample data that can be used. I think i have an idea of how to do it, but i'm not totally sure if it will work that way, i have however included it in the sample data.
Code Snippet
DECLARE @ImportedStagingData TABLE
(
ID INT IDENTITY(1,1),
Name VARCHAR(50),
Surname VARCHAR(50),
Email VARCHAR(50),
[Chronic Heart Failure] INT,
[Colon Cancer] INT
)
INSERT INTO @ImportedStagingData VALUES ('Carel', 'Greaves', 'CarelG@Email.com', 1,0)
INSERT INTO @ImportedStagingData VALUES ('Jamie', 'Jameson', 'JamieJ@Email.com', 1,1)
INSERT INTO @ImportedStagingData VALUES ('Sarah', 'Bolls', 'SarahB@Email.com', 0,1)
INSERT INTO @ImportedStagingData VALUES ('Bells', 'Scotch', 'BellsS@Email.com', 1,1)
INSERT INTO @ImportedStagingData VALUES ('Stroh', 'Rum', 'StrohR@Email.com', 0,0)
DECLARE @Conditions TABLE
(
ID INT IDENTITY(1,1),
Condition VARCHAR(50)
)
INSERT INTO @Conditions VALUES ('Chronic Heart Failure')
INSERT INTO @Conditions VALUES ('Colon Cancer')
DECLARE @Members TABLE
(
MemberID INT IDENTITY(1,1),
Name VARCHAR(50),
Surname VARCHAR(50),
Email VARCHAR(50)
)
DECLARE @memConditions TABLE
(
MemberID INT,
ConditionID INT
)
SELECT * FROM @ImportedStagingData
SELECT * FROM @Conditions
SELECT * FROM @Members
SELECT * FROM @memConditions
/* --- This is the part that i am battling with ---
DECLARE @CurrentValue INT
DECLARE @numValues INT
SET @numValues = (SELECT COUNT(ID) FROM @ImportedStagingData)
WHILE @numValues <> 0
BEGIN
INSERT INTO @Members
SELECT Name, surname, email
FROM @ImportedStagingData
GO
SET @CurrentValue = (SELECT IDENT_CURRENT('@ImportedStagingData'))
INSERT INTO @memConditions (MemberID), (ConditionID)
VALUES (@CurrentValue, --ConditionValue from @ImportedStagingData, all the values that have a 1)
@numValues = @numValues - 1
END
END
*/
All help will be greatly appreciated.
Kind Regards
Carel Greaves
View 5 Replies
View Related
Aug 17, 2000
i've checked a number of places, including the archives, but haven't found any guidance. i have to read data from a sql7 database, as a join. normally, that's not a big deal, but the select (if i could actually write it this way) would look thus:
<pre>
select * from table1, table2, <table3 name>
where table1.id = table2.id and
<table3 name> = table2.table2name
</pre>
that is, a table name is found from another table's column. i know that the database folks do most of their processing using stored procedures, and i'm guessing that this is how they manage to do the select. but i can't find any references that describe the syntax to use.
any guidance is appreciated.
robert young
View 3 Replies
View Related
Sep 2, 2007
Hi there,
I am using this stored procedure in sql.
I have 6 tables. One is called employees. This is what I need to be able to do. A user enters a new employee into a winform, picks a role, division, manager, technicalskill set and applications from the drop down lists and hits save. The employee table should be the only one updated and has these columns only.( firstname, lastname, dvisionid, managerid, roleid,techskillsid, and appID). At the moment what is happening is its saving the firstname, lastname correctly, but the rest of the ID columns are null. It is updating the other tables with the string entered but what I need is the emplyee table to update with the corresponding ids. Is this alot more complicated then i thought? If I try to replace the role with roleid etc, it will just tell me I can't convert string to int which is understandable. How do I do this?
CREATE PROCEDURE sp_InsertEmployee
@Firstname nvarchar(50),
@Lastname nvarchar(50),
@Role nvarchar(50),
@Manager nvarchar(50),
@Division nvarchar(50)
AS
BEGIN
SET NOCOUNT ON;
INSERT INTO EMPLOYEES (FIRSTNAME, LASTNAME) VALUES (@FIRSTNAME, @LASTNAME)
INSERT INTO [ROLE] ([ROLE]) VALUES (@ROLE)
INSERT INTO MANAGER (MANAGER) VALUES (@MANAGER)
INSERT INTO DIVISION(DIVISION) VALUES (@DIVISION)
END
GO
My C# code is like this:
SqlCommand sqlC = new SqlCommand("sp_InsertEmployee", myConnection);
sqlC.CommandType = CommandType.StoredProcedure;
sqlC.Parameters.Add(new SqlParameter("@Firstname", SqlDbType.VarChar, 50, "Firstname"));
sqlC.Parameters.Add(new SqlParameter("@Lastname", SqlDbType.VarChar, 50, "Lastname"));
sqlC.Parameters.Add(new SqlParameter("@RoleID", SqlDbType.Int, 50, "RoleID"));
sqlC.Parameters.Add(new SqlParameter("@ManagerID", SqlDbType.Int, 50, "ManagerID"));
sqlC.Parameters.Add(new SqlParameter("@DivisionID", SqlDbType.Int, 50, "DivisionID"));
//sqlC.Parameters[0].Value = 4;
sqlC.Parameters[0].Value = FirstnameText.Text;
sqlC.Parameters[1].Value = Lastnametext.Text;
sqlC.Parameters[2].Value = RolecomboBoxTest.Text;
sqlC.Parameters[3].Value = ManagercomboBox1.Text;
sqlC.Parameters[4].Value = DivisioncomboBox2.Text;
int i = sqlC.ExecuteNonQuery();
//sqlC.ExecuteNonQuery();
Sorry for pasting so much.
View 2 Replies
View Related
May 28, 2010
difference between FOR LOOP and FOREACH LOOP with example(if possible) in SSIS.
View 4 Replies
View Related
Feb 22, 2006
I have a table with RowID(identity). I need to loop though the table using RowID(not using a cursor). Please help me.
Thanks
View 6 Replies
View Related
Mar 3, 2006
I have a foreach loop that is supposed to loop through a recordset, however it doesn't loop. It just repeats the same row, row after row.
I would like to look into the recordset variable but I can't because it is a COM object and the ADODB namespace is not available in the script task.
Any solution to this? anyone experienced anything similar
View 1 Replies
View Related
Jul 8, 2006
I have a table called Tbltimes in an access database that consists of the following fields:
empnum, empname, Tin, Tout, Thrs
what I would like to do is populate a grid view the a select statement that does the following.
display each empname and empnum in a gridview returning only unique values. this part is easy enough. in addition to these values i would also like to count up all the Thrs for each empname and display that sum in the gridview as well. Below is a little better picture of what I€™m trying to accomplish.
Tbltimes
|empnum | empname | Tin | Tout | Thrs |
| 1 | john | 2:00PM | 3:00PM |1hr |
| 1 | john | 2:00PM | 3:00PM | 1hr |
| 2 | joe | 1:00PM | 6:00PM | 5hr |
GridView1
| 1 | John | 2hrs |
| 2 | Joe | 5hrs |
im using VWD 2005 for this project and im at a loss as to how to accomplish these results. if someone could just point me in the right direction i could find some material and do the reading.
View 18 Replies
View Related
Feb 23, 2006
I have source and destination table names in the database(one table) and I need to read the source and destination tables one by one...
My Lookp table is like the following...
Srn srctable desttable
1 SRC1 DEST1
2 SRC2 DEST2
3 SRC3 DEST3
Now I want one package to load from source to destination.. how do I do it.. I dont know how to use....
How do I run the pacakge for each of the rows... ..............................
View 1 Replies
View Related
Mar 3, 2006
Just curios,
I have four 72 GB Drive on a RAID 5
Disk Specs
IO/Second = 130 per disk
Speed RPM = 15 K
When I did a load test of inserting data into a table
with four Columns
Col1 INT
Col2 VARCHAR(32)
Col3 VARCHAR(4000)
Col4 DATETIME
I could insert around 1044 Inserts per second where as
I thought I could do max of 520 Inserts ( 130 * 4 ) because
each disk can only take 130 Inserts multiplied by 4 Disks
gives me a theoritical limit of 520.
Also How does the Query Analyser Connects to the datbase
Server.. does it use ODBC
Thx
Venu
View 1 Replies
View Related
Mar 21, 2006
I am doing a simple IO Test with the below script ...
Just wanted to keep things simple and to check how many Inserts I can do on a given SQL Server.
I am running the below script from QA for 1 minute and then divide the No or rows inserted by 60.
Will it give me approximate results by duing this?
Actually the datafiles .MDF files are sitting on a single drive where the manufacturer specs shows that it will handle 130 IO's per disk. With the below script I am getting around 147 Inserts per second.
But my boss says that he is getting 2000 inserts per second on his laptop from a ...Am I missing some thing?
DECLARE @lnRowCnt INT
SELECT @lnRowCnt = 100000
WHILE @lnRowCnt > 0
BEGIN
SET NOCOUNT ON
INSERT INTO CTMessages..Iotest
SELECT @lnRowCnt , 'VENU' , REPLICATE ( 'V' , 4000 ) , 1000000
SELECT @lnRowCnt = @lnRowCnt - 1
END
Thx
Venu
View 3 Replies
View Related
Apr 11, 2007
I'm using a SQLDataSource and trying to do two inserts into two different tables with one InsertCommand, but it's not working. Here's the code I'm trying to use. Do you see anything wrong with the syntax? I keep getting an error that says error near ',' but I can't figure out why. Thanks
InsertCommand="INSERT INTO [OurProjects] ([Title], [Description], [Location], [Anchors], [Size], [Developer], [DesignBuilder], [Architect], [ImageName], [MapName], [ProjectTypeAbbrev], [Deleted]) VALUES (@Title, @Description, @Location, @Anchors, @Size, @Developer, @DesignBuilder, @Architect, @ImageName, @MapName, @ProjectTypeAbbrev, @Deleted),
INSERT INTO [OurProjectsImages] ([OurProjectsID], [ImageMonthName], [SwfName]) VALUES (@OurProjectsID, @ImageMonthName, @SwfName)"
View 2 Replies
View Related
May 27, 2008
I need to Add a Check in the database to ensure that user can only enter up to 20 entries to Database in a period of 10 minutes. Basically, to guard against people using scripts to add data to the database ( instead of using CAPTCHAE on the front end) what we want to do is restrict user to entering at most 20 transactions in 10 Minutes.How do I handle or do this in SQl Server 2005??
What I figure to do is right after I do an INSERT into the table, I Select the last 20 entries into that same table and then Calculate the Total time it took to add those 20 transactions and set the righ flag.
1) How do I select last 20 entries into a table??
2) How do I calculate the total time that elapsed between adding the first of those 20 records and the last??
Thanks in Advance
View 6 Replies
View Related
Sep 21, 2004
G'day,
I have a table with a primary key being a bigint and its set to auto increment (or identity or whatever ms calls it). Is there anyway I can get the ID number that will be assigned to the next Insert before I insert it? I want to use that ID number within another field when inserted.
I hope that makes sense.
Thanks for any help.
Robbo
View 3 Replies
View Related
Jul 14, 2005
Hi, I'm trying to create a form where new names can be added to a database. The webform looks like this:<body MS_POSITIONING="GridLayout"> <form id="Form1" method="post" runat="server"> Name:<asp:TextBox ID="newName" runat="server" /> <INPUT id="NewUserBtn" type="button" value="Create New User" name="NewUserBtn" runat="server" onServerClick="NewBtn_Click"> </form>And the code behind looks like this:Public Sub NewBtn_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles NewUserBtn.ServerClick Dim DS As DataSet Dim MyConnection As SqlConnection Dim MyCommand As SqlDataAdapter
MyConnection = New SqlConnection("server=databaseserver;database=db;uid=uid;pwd=pwd") MyCommand = New SqlDataAdapter("insert into certifications (name) values ('" & newName.Text & "'); select * from certifications", MyConnection)
DS = New DataSet MyCommand.Fill(DS, "Titles")
Response.Redirect("WebForm1.aspx", True) End SubWhen I try to insert one name it works. When I try to insert a second name, it overwrites the old one. Why is that?Thanks.James
View 3 Replies
View Related
Apr 15, 2006
Hey All,
I was trying to use a typed dataset to create a very simple DAL. I found that the code generated for the INSERT statement includes an identity field the table has. That can obviously never work (unless identity_insert is set, which it is not). My question is whether it is possible to control this insert statement generation? Is there a property I am missing somewhere? My solution was to change the INSERT statement on the DataTableAdapter, but that seems awkward for me to have to do that..
Thanks,
Yuval
View 3 Replies
View Related
Jan 22, 2001
I have a number of columns with predefined character length but user can input more from gui. i want to trucncate automatically to the desired length and insert or update the database right now it does not allow me to update , or insert the values can i do it and how this is urgent
View 2 Replies
View Related
Jan 24, 2000
We have a 4 processor 350 Hz NT 4.0 SQL server. Currently we have an application
that is inserting rows one at a time, each row insert is a separate transaction.
Currenty we are averaging 2500 rows a second with each row ( 56 bytes wide).
The data and the log are on one string of Raid disk. We plan to get another controller
and raid string to separate the data and the log onto separate controllers.
The developer is modifying the application to insert the data in blocks. What is the
impact to the transaction log? He seems to think that by inserting page blocks on
rows there would be less data going into the transaction log. Why would this be so?
Does anyone have any information on practical limits for inserts and log truncation
with similar machine configurations. He would like to try to get around 150,000 rows a second.
Has anyone accomplished inserts at this rate? What type of machine configuration?
View 1 Replies
View Related
Nov 21, 2001
Hi,
I have a small web application managing complaints. During multiuser testing we noticed that when complaints where added at "exactly" the same time one complaint text seemed to be over writing the other, and returning the current max value for table id as current complaint number.
I tested in my development environment and was able to recreate reasonably easily ( 1 go out of 3 recreated the issue ). The Id column itself is an auto increment ( primary key ), so I can't think of a concievable reason why one record should overwrite another. I should say that I am assuming the record is overwritten, perhaps there is a clash and one complaint is ignored by the database.
Have anyone encountered this in the past?
Thanks
View 1 Replies
View Related
Mar 6, 2002
Hi,
I have a procedure that I call on one database, and one of it's steps is to write to a table on another database, same server. the user exists in both databases, but i keep getting errors when i try and write to this second database. i know i can fix this by giving the user insert permissions on the table in this second database, but i do not want this for security purposes. any other ideas on how to accomplish this?
View 1 Replies
View Related
Dec 5, 2005
i have a {date value}
i have a {frequency value}
1 = yearly
4 = quarterly
12 = monthly
i need to select an item
then check the frequency
then do a loop insert based on the frequency
if frequency = 1
insert item, date into table where date = {date value}
elseif frequency = 4
Per item -- insert 4 new entrys
insert item, date into table where date = {date value}
insert item, date into table where date = {date value + quarter}
insert item, date into table where date = {date value+ 2 quarters}
insert item, date into table where date = {date value + 3 quarters}
<
' below is how i can calculate quartly values from a date iv vb .net just need to do the same within sql
Dim Quarterloop AS Integer
for QuarterLoop = 0 to 3 >
<= formatdatetime(dateadd("q", Quarterloop , MyDate),DateFormat.longdate) ><br>
< Next >
elseif frequency = 12
--- per item insert 12 new entrys
insert 12 items into the table looping from date and then in 12 increments of 1 month values
View 9 Replies
View Related
Oct 15, 2004
Currenlty I have huge amounts of data going into a table.
I'm sending an xmldoc and using openxml with a cursor to seed them.
the question I have is whether to let duplicate keyed data rows bounce
and then check @@error and then do an update on the nokeyed field
or
to do a select on the keyed field and then do an insert or update based on the
selects results.
Speed is my goal.
View 3 Replies
View Related
May 27, 2008
Hello All,
I have to create dynamic insert statements for the table. For example there are DevTableA and ProdTableA tables. I worte a SQL to get the new records added in the DevTableA but are not there in ProdTableA. The result gives me a list of rows. These tables have a column 'LanguageID' and 'LText'
The compare result has records only for LanguageID = 0. One I see the compare result. I am suppose to create insert statements for LanguageID = 1,2,5 and 6 and update the Ltext for those languages. The Ltext for other languages is in spreadsheet.
Can anyone advice me how to create the insert statements from the comapre result and add 4 more insert statements for LanguageID = 1,2,5 and 6 with their respective Ltext.
So far I thought I can create #table. Looks like I need more than 1 # table.
Thanks in advance
-S
View 4 Replies
View Related
Mar 3, 2006
I'm trying to perform a bulk insert as shown below. It's problematic b/c it's not updating the identity fields correctly and we're getting dups. I think, but I'm not sure, that On Update Cascade would solve all this, b/c we wouldn't have to concern ourselves with even touching the identity fields, b/c they would be autogenerated. Can someone shed some light?? I'm pretty confused.
CREATE PROCEDURE AddMiamirecords AS
BEGIN TRANSACTION
--USERS
INSERT INTO [Undex_Production].[dbo].[USERS]([LastName], [UserName], [EmailAddress], [Address1], [WorkPhone], [Company], [CompanyWebsite], [pword], [IsAdmin], [IsRestricted],[AdvertiserAccountID])
SELECT dbo.fn_ReplaceTags (convert (varchar (8000),Advertisername)), [AdvertiserEmail], [AdvertiserEmail],[AdvertiserAddress], [AdvertiserPhone], [AdvertiserCompany], [AdvertiserURL], [AccountNumber],'3',0, [AccountNumber]
FROM Miami
WHERE not exists (select * from users Where users.Username = miami.AdvertiserEmail)
AND validAD=1
--PROPERTY
INSERT INTO [Undex_Production].[dbo].[Property]([ListDate],[CommunityName],[TowerName],[PhaseName],[Unit], [Address1], [City], [State], [Zip],[IsActive],[AdPrintId])
SELECT [FirstInsertDate],[PropertyBuilding],[PropertyStreetAddress],PropertyCity + ' ' + PropertyState + ' ' + PropertyZipCode as PhaseName,[PropertyUnitNumber],[PropertyStreetAddress],[PropertyCity], [PropertyState], [PropertyZipCode],'0',[AdPrintId]
FROM [Undex_Production].[dbo].[miami]
WHERE miami.AdvertiserEmail IS NOT NULL
AND validAD=1
--ITEM
INSERT INTO [Undex_Production].[dbo].[ITEM] ([SellerID],[Price],[StartDate],[EndDate], [HomePageFeatured],[Classified],[IsClosed])
SELECT USERS.UserID, miami.PropertyPrice, convert(datetime,miami.FirstInsertDate), dateadd(day, 30, miami.FirstInsertDate)as EndDate, 1, convert (int,AdNumber) as Classified, 0
FROM USERS RIGHT OUTER JOIN
miami ON USERS.UserName = miami.AdvertiserEmail
WHERE validAD=1
--PROPERTYITEM
INSERT INTO [Undex_Production].[dbo].[propertyItem]( [propertyId], [ItemId])
SELECT Property.propertyId, ITEM.ItemID
FROM ITEM RIGHT OUTER JOIN
miami ON ITEM.StartDate = miami.FirstInsertDate AND ITEM.Price = miami.PropertyPrice AND ITEM.Classified = convert(int,miami.AdNumber) LEFT OUTER JOIN
Property ON miami.PropertyUnitNumber = Property.Unit AND miami.PropertyZipCode = Property.Zip AND
miami.PropertyCity = Property.City AND miami.PropertyStreetAddress = Property.Address1
WHERE validAD=1
--CONDOFEATURES
INSERT INTO [Undex_Production].[dbo].[CondoFeatures](PropertyId,[Bedrooms], [Area], [PropertyDescription], [Bathrooms], [NumOfFloors])
SELECT Property.propertyId, [PropertyBedrooms], [PropertySquareFeet], dbo.fn_ReplaceTags (convert (varchar (8000),PropertyDescription)),
[PropertyBathrooms], [PropertyTotalFloors]
FROM miami LEFT OUTER JOIN
Property ON miami.PropertyUnitNumber = Property.Unit AND miami.PropertyZipCode = Property.Zip AND
miami.PropertyCity = Property.City AND miami.PropertyStreetAddress = Property.Address1
WHERE validAD=1
--COMMUNITY FEATURES
INSERT INTO [Undex_Production].[dbo].[CommunityFeatures](PropertyId,[totalFloors],isComplete1)
SELECT Property.propertyId, miami.propertyTotalFloors,'0' as IsComplete
FROM miami LEFT OUTER JOIN
Property ON miami.PropertyUnitNumber = Property.Unit AND miami.PropertyZipCode = Property.Zip AND
miami.PropertyCity = Property.City AND miami.PropertyStreetAddress = Property.Address1
WHERE validAD=1
--UNITDISCLOSURES
INSERT INTO [Undex_Production].[dbo].[UnitDisclosures]([propertyId],[monthcondoasso])
SELECT Property.propertyId, [propertyassocfee]
FROM miami LEFT OUTER JOIN
Property ON miami.PropertyUnitNumber = Property.Unit AND miami.PropertyZipCode = Property.Zip AND
miami.PropertyCity = Property.City AND miami.PropertyStreetAddress = Property.Address1
WHERE validAD=1
--BROKERDEVELOPER
INSERT INTO [Undex_Production].[dbo].[BrokerDeveloper]([IsFSBO],[FSBOName],
[FSBOEmail],[FSBOWebsite],[IsDeveloper],[DeveloperName],[DeveloperWebsite],[IsBroker],[BrokerName],[BrokerageWebsite],
[propertyId],[brokercommission],[isComplete])SELECT
CASE AdvertiserType when 'FSBO' THEN 1 else 0 end,
CASE AdvertiserType when 'FSBO' THEN [AdvertiserName] else NULL end,
CASE AdvertiserType when 'FSBO' THEN [AdvertiserEmail] else NULL end,
CASE AdvertiserType when 'FSBO' THEN [AdvertiserURL] else NULL end,
CASE AdvertiserType when 'Developer' THEN 1 else 0 end,
CASE AdvertiserType when 'Developer' THEN [AdvertiserName] else NULL end,
CASE AdvertiserType when 'Developer' THEN [AdvertiserURL] else NULL end,
CASE AdvertiserType when 'Realtor' THEN 1 when 'Broker' THEN 1 else 0 end,
CASE AdvertiserType when 'Realtor' THEN [AdvertiserName] when 'Broker' THEN [AdvertiserName] else NULL end,
CASE AdvertiserType when 'Realtor' THEN [AdvertiserURL] when 'Broker' THEN [AdvertiserName] else NULL end,
Property.propertyId,[PropertyCommBroker],'0' as IsComplete
FROM miami LEFT OUTER JOIN
Property ON miami.PropertyUnitNumber = Property.Unit AND miami.PropertyZipCode = Property.Zip AND
miami.PropertyCity = Property.City AND miami.PropertyStreetAddress = Property.Address1
WHERE validAD=1
IF @@ERROR <> 0
BEGIN
ROLLBACK TRAN
RETURN
END
COMMIT TRANSACTION
GO
View 2 Replies
View Related
Nov 24, 2007
is there any easy way I can take a select statment
(such as select from payments where datetime>'20071122' and output a sql insert statment for these records?
I basically need to move a specific set of records from one sql server to another (both sql server 2005)
any suggestions for the best way to do this?
View 4 Replies
View Related
Jul 23, 2005
Hello everybody,Just short question:I have tables, which are only log tables (very less used for selects),but there is a lotof writing.I would like to have as much speed as possible by writing data intothis tables.create table [tbl] ([IDX] [numeric](18, 0) IDENTITY (1, 1) NOT NULL ,[Time_Stamp] [datetime] NOT NULL ,[Source] [varchar] (64) COLLATE Latin1_General_CI_AS NULL ,[Type] [varchar] (16) COLLATE Latin1_General_CI_AS NULL ,[MsgText] [varchar] (512) COLLATE Latin1_General_CI_AS NULL ,CONSTRAINT [tbl] PRIMARY KEY NONCLUSTERED([IDX]) ON [PRIMARY]) ON [PRIMARY]GOQuestion:Is it better for inserts,, to remove PK but leave identity insert?How to make this table optimized for writing?If I will set fill level of the table with 0%, will I winn much?Once information: this table will be deleted with old data, dependingon row count (oldest ID's will be deleted each night).Thank You in advanceMateusz
View 2 Replies
View Related
Mar 29, 2006
according to the mysql manual, multiple inserts can be sped up bylocking the table before doing them and unlocking the table afterwards.is the same true of multiple inserts in mysql? if so, how would thetable be locked?any insights would be appreciated - thanks!
View 3 Replies
View Related
Jul 5, 2007
Dear Experts,What is the best way to do a large insert WITHOUT having direct accessto the machine SQL Server is running on? For example, imagine I wantto insert something like 20,000 records. If I were to have access tothe server, I could BULK INSERT into a temp table and then insert intothe destination table. But if I can't create a file on the server touse for BULK INSERT, what is the next best alternative to doing lotsof 1 record insert statements?Thanks,-Emin
View 4 Replies
View Related
Jul 20, 2005
Is there any known SQL Server bug whereby a record can be successfullyinserted and committed, but then later be found not to be in thedatabase? For example, if there was a server crash just after thecommit, could committed data be lost?I'm sure the answer must be "no", but a client is telling me this ishappening, and I said I'd enquire.
View 4 Replies
View Related
Jul 20, 2005
We have installed a package developed by another company and sometimes(when the server is with a big rate of transactions), we are seeingthe following messages in package debug file:2004-04-22 14:23:27 3056:------------------------------------------------------------2004-04-22 14:23:27 3056: rlm03000: ls_PutOneRecord: Failed inserting[04113SO07236054]2004-04-22 14:23:27 3056: ODBCSetCursorName[3056]: Failed specifyingcursor concurrency to statement handle 1 for 'ls_rep_add'2004-04-22 14:23:27 3056: dbc01003: ODBCSetCursorName[3056]:ls_rep_add generated SQL error state: 240002004-04-22 14:23:27 3056: dbc01002: [Microsoft][ODBC Driver Manager]Invalid cursor state2004-04-22 14:23:27 3056: odbcFilterConnectErrors[3056]: set theiState to ODBC_DISCONNECT for <24000>2004-04-22 14:23:27 3056: Function Return Code [00001] ODBC_ERROR2004-04-22 14:23:27 3056: Operation [00000] ls_PutOneRecord2004-04-22 14:23:27 3056: Primary Return Code [00000] 000002004-04-22 14:23:27 3056: Secondary Return Code [0000000001] 000002004-04-22 14:23:27 3056:------------------------------------------------------------When this message appears in the app debug file we are loosing someinserts that the application do in the database.The MS SQL server configuration is:4 Pentium 760Mhz 4 GB RAMSQL 2000 Standard Edition 8.00.760 SP 4MDAC 2.7 driver ODBC SQLSRV32.dll 2000.81.9031.14 15/11/2002Any tip will be welcome,Thanks in advance,Reis
View 2 Replies
View Related
Feb 29, 2008
I've got a package that needs to do various single-row inserts/updates throughout the flow of the package. Each insert/update will use values from variables.
What is the best practice for doing this? I was going to use a DFT with my source being a derived column transformation, but it expects a true data source.
I've also thought about just using the obvious -- a SQL command task -- by my experience with doing commands using single values is that it's very quirky and hard to get the data types and mappings to cooperate.
I'm betting the SQL command task is my only option, but I wanted to check here first to see if others had other ideas.
Thanks in advance.
Jerad
View 5 Replies
View Related
Mar 22, 2006
cstring = cstring + "VALUES('%" + txtWatchID.Text + "%','%" + txtcenter + "%'" & _
cstring = "INSERT INTO tblNEW (watch_id, service_center_num, repair_envelope, store_number"
cstring = cstring + "date_purchase, transaction_num, cust_fname, cust_lname, product_code"
cstring = cstring + "value_watch, failure_date, service_date, failure_code, repair_code"
cstring = cstring + "service_request, store_number_senditem, register_number, street_address"
cstring = cstring + "city, state, zip_code, area_code, phone_num, product_desc, service_center"
cstring = cstring + " work_to_bdone, auth_num, labor_cost, parts_cost, tax_cost, total_cost"
cstring = cstring + "notes, client_number)"
cstring = cstring + "VALUES('%" + txtWatchID.Text + "%','%" + txtcenter + "%'" & _
this is the error is get, but i did the same thing on a select statement and it works fine...do i need to add something to the string or what i am kinda confused and help would be great.....
Operator '+' is not defined for types 'String' and 'System.Windows.Forms.TextBox'.
View 15 Replies
View Related
