Pass List Of Id's In Xml As I/p To Stored Proc
Sep 24, 2007
hii
I have a problem in when i pass xml as input to stored procedure. The problem i m facing is that :
Say i have a table which has id as primary key in it.Now in my sp i want to delete some rows from that table and in xml i am passin more than 1 id ( it can be four even).
But before deleteion i want to check that delete the with that ID iff the ID exists else raise error for the id w/c does not exist like 'This Id does not exist.'
what i want is to loop between the id's which are being passed as i/p to sp..
and delete the row if it exists elso diaplsy message this id does not exist..
somewhat like this
If Exists(Select ProfileName From Area52 Where Area52ID in
( Select T.Item.value( '@Area52ID', 'uniqueidentifier')
FROM @XMLString.nodes('Area52') AS T(Item) ))
Begin
Select * From Area52Docs
WHERE Area52ID in
( Select T.Item.value( '@Area52ID', 'uniqueidentifier')
FROM @XMLString.nodes('Area52') AS T(Item) )
DELETE FROM Area52Docs
WHERE Area52ID in
( Select T.Item.value( '@Area52ID', 'uniqueidentifier')
FROM @XMLString.nodes('Area52') AS T(Item) )
DELETE FROM Area52
FROM @XMLString.nodes('Area52') AS T(Item)
where Area52id=T.Item.value( '@Area52ID', 'uniqueidentifier')
select T.Item.value( '@Area52ID', 'uniqueidentifier') FROM @XMLString.nodes('Area52') AS T(Item)
Select 12
End
Else RaisError('This Record Does Not Exist',11,1)
the thing i want to do is as above..but its not workin..it works only for the first id int he list of id's
plzz do help...
View 3 Replies
ADVERTISEMENT
Feb 11, 2015
I have a multiselect checkbox list in my UI. I pass the list items to my stored proc as comma separated parameter and then I have a function which converts this parameter to a table with separate rows.
E.g. : a,b,c,d
Converted to result table
result
a
b
c
d
I want to insert each row of the result table into another table. How to do that.
E.g., the table after the function is :
CREATE TABLE #result
(
Subject varchar(100)
)
insert into #result values ('a')
insert into #result values ('b')
insert into #result values ('c')
insert into #result values ('d')
So the pseudo code is something like
for each row in #result
insert row into another table
View 9 Replies
View Related
Oct 13, 2000
In my front end, I have a procedure in which the operator selects multiple tickets. I have in mind to create a stored procedure which accepts its input parameter and plugs it into an IN() clause in an Update statement, something along these lines:
Update TicketInventory Set SalesID = 12345 Where TicketInventoryID IN( myInputParam );
Can I pass an array of Integers into a stored proc and have it work like this? Alternatively, I could pass a comma-delimited string containing the Integers. Could I plug that into the IN()? Or is there is yet another way to accomplish this?
TIA,
Arthur
View 1 Replies
View Related
Mar 9, 2006
Can you pass an array into a stored proc or do we have to use indiviual parameters.
If we can, any code exmaple woudl be great.
Cheers
Chris
View 4 Replies
View Related
Feb 9, 2008
Hi, I have created an insert stored procedure which inserts a userid into an sql server 2005 field of datatype uniqueidentifier.
What datatype would the parameter be in my c# code?
do i pass it in as an object datatype?
the code is below....
1 conn = new SqlConnection(ConfigurationManager.ConnectionStrings["LocalSqlServer"].ConnectionString);
2
3 cmd = new SqlCommand("spInsKeyswap_history", conn);
4
5 cmd.CommandType = CommandType.StoredProcedure;
6
7 MembershipUser mu = Membership.GetUser(User.Identity.Name);
8
9 object gdUserID = mu.ProviderUserKey;
10
11
12
13
14
15 cmd.Parameters.Add("@user_title", SqlDbType.VarChar, 50);
16
17 cmd.Parameters.Add("@first_name", SqlDbType.VarChar, 20);
18
19 cmd.Parameters.Add("@last_name", SqlDbType.VarChar, 50);
20
21 cmd.Parameters.Add("@email", SqlDbType.VarChar, 50);
22
23 cmd.Parameters.Add("@birthday", SqlDbType.VarChar, 15);
24
25 cmd.Parameters.Add("@alternate_number", SqlDbType.VarChar, 50);
26
27 cmd.Parameters.Add("@msisdn", SqlDbType.VarChar, 50);
28
29 cmd.Parameters.Add("@call1", SqlDbType.VarChar, 50);
30
31 cmd.Parameters.Add("@call2", SqlDbType.VarChar, 50);
32
33 cmd.Parameters.Add("@call3", SqlDbType.VarChar, 50);
34
35 cmd.Parameters.Add("@new_sim_msidn", SqlDbType.VarChar, 50);
36
37 cmd.Parameters.Add("@dealer_id", SqlDbType.UniqueIdentifier);
38
39 cmd.Parameters.Add("@status_code", SqlDbType.Int);
40
41 cmd.Parameters.Add("@support_id", SqlDbType.Int);
42
43 cmd.Parameters.Add("@return_value", SqlDbType.Int);
44
45 cmd.Parameters["@user_title"].Value = txtTitle.Text.ToString();
46
47 cmd.Parameters["@first_name"].Value = txtFirstName.Text.ToString();
48
49 cmd.Parameters["@last_name"].Value = txtLastName.Text.ToString();
50
51 cmd.Parameters["@email"].Value = txtEmailAddress.Text.ToString();
52
53 cmd.Parameters["@birthday"].Value = txtBirthday.Text;
54
55 cmd.Parameters["@alternate_number"].Value = txtAlternate.Text.ToString();
56
57 cmd.Parameters["@msisdn"].Value = txtNew.Text.ToString();
58
59 cmd.Parameters["@call1"].Value = txtCall1.Text.ToString();
60
61 cmd.Parameters["@call2"].Value = txtCall2.Text.ToString();
62
63 cmd.Parameters["@call3"].Value = txtCall3.Text.ToString();
64
65 cmd.Parameters["@new_sim_msidn"].Value = txtOld.Text.ToString();
66
67 //get logged in users user_id from membership
68
69 cmd.Parameters["@dealer_id"].Value = gdUserID;
70
71 cmd.Parameters["@status_code"].Value = 1;
72
73 cmd.Parameters["@support_id"].Value = 0;
74
75
76
77 cmd.Parameters["@return_value"].Direction = ParameterDirection.ReturnValue;
78
79 cmd.ExecuteNonQuery();
80
81 int returnValue = (int)cmd.Parameters["@return_value"].Value;
82
83 conn.Open();
84
85
86
View 1 Replies
View Related
Jan 18, 2008
I'm in sql server mgmt 2005 and i highlighted a stored proc and clicked on "execute". I need to pass a null value in as the first param value to test this stored proc. what is the syntax, is below correct?
EXECUTE @RC = [SomeDataBaseName].[dbo].[sp_SomeStoredProcedure]
null
,'1234'
,1
View 3 Replies
View Related
Apr 8, 2008
I am trying to test a stored proc and I can't execute the stored proc when I use a Guid. Has anyboyd had the same problem. I right click in VS 2008 on the Stored proc click Execute and fill in the variables one of them is a Guid and no records are returned.
Here is my guid, I have tried '{0a5c25fa-3aac-4abc-8d07-6d76ab46c9b2}', {0a5c25fa-3aac-4abc-8d07-6d76ab46c9b2} and "0a5c25fa-3aac-4abc-8d07-6d76ab46c9b2" no success. This stored proc might not work but I have had the same issue with other stored procs when I wanted to test them by using execute and using a Guid.
Testing with an int works fine when I try to Select the records by UserID which is a Guid no cigar. I have notice this behavier before is there a way around this problem, thanks newbie
View 3 Replies
View Related
May 2, 2008
I am trying to pass a comma delimited llist of names to a stored procedure. I am getting a syntax error and I can't seem to figure out why. When i plug the names by hand into my select statement in query analyzer it all works fine.
Just a little background so i don't have to put all the code in... the list of name is built dynamically.
Below are all the code snippets. Thanks for your help in advance.
The is the list of names and the call to the stored procedure:
Code:
employeeList = 'name1','name2',name3','name4','name5'
SQL="sp_REVIEW @ACTION='lde', @CURRENT_USER='" & currentUser & "', " &_
"@EMPLOYEE_LIST='" & employeeList & "'"
Here is the stored procedure
Code:
SELECT ww.ORACLE_USER_NAME, ww.LAST_NAME + ', ' + ww.FIRST_NAME as employeeName,
ww1.DIVISION + ' - ' + ww1.COST_CENTER + ' - ' + ww1.COST_CENTER_DESC as department
FROM WHOS_WHO.dbo.HR_PEOPLE_V ww
LEFT JOIN WHOS_WHO.dbo.HR_DEPARTMENTS_V ww1 ON ww.DEPARTMENT_ID = ww1.ORG_ID
WHERE ww.SEARCHABLE = 1 AND ww.ORACLE_USER_NAME IS NOT NULL AND ww.PERSON_TYPE = 'Employee'
AND (ww.ORACLE_USER_NAME IN (@EMPLOYEE_LIST)
OR ww.DEPARTMENT_ID IN (SELECT ud.department_id
FROM USER_DEPARTMENT ud
WHERE ud.nt_id = @CURRENT_USER))
ORDER BY ww.LAST_NAME, ww.FIRST_NAME
View 8 Replies
View Related
Mar 17, 2006
I have the following ASP code that builds part of the example SQL statement below (it's the same SQL as in my earlier thread here (http://www.dbforums.com/showthread.php?t=1214044) but a very different question):
if sFindTicketEventId > 0 then sSQL = sSQL & " AND [tblEvents].[id]=" & sFindTicketEventId
if sFindTicketStandId > 0 then sSQL = sSQL & " AND [tblStands].[id]=" & sFindTicketStandId
SELECT
[tblC].[id] AS CombinationID,
[tblC].[availability],
[tblC].[description],
[tblC].[price] AS combinationPrice,
[tblC].[combination_open],
[tblT].[TicketID] AS TicketID,
[tblT].[price] AS ticketPrice,
[tblT].[availability],
[tblT].[ticket_open],
[tblT].[quantity],
[tblT].[event_name],
[tblT].[event_open],
[tblT].[stand_name],
[tblT].[stand_open],
[tblT].[admission_start_date],
[tblT].[admission_end_date],
[tblT].[date_open],
[tblT].,
[tblT].,
[tblT2].[description],
[tblT2].[admin_description]
FROM(
SELECT
[tblCombinations].[id],
[tblTickets].[id] As TicketID, [tblTickets].[price], [tblTickets].[availability], [tblTickets].[ticket_open],
[tblCombinations_Tickets].[quantity],
[tblEvents].[event_name],
[tblEvents].[event_open],
[tblStands].[stand_name],
[tblStands].[stand_open],
[tblAdmissionDates].[admission_start_date],
[tblAdmissionDates].[admission_end_date],
[tblAdmissionDates].[date_open],
[tblBookingDates].[booking_start_date],
[tblBookingDates].[booking_end_date]
FROM [tblCombinations]
LEFT JOIN [tblCombinations_Tickets] ON [tblCombinations_Tickets].[combination_id] = [tblCombinations].[id]
LEFT JOIN [tblTickets] ON [tblCombinations_Tickets].[ticket_id] = [tblTickets].[id]
LEFT JOIN [tblEvents] ON [tblEvents].[id] = [tblTickets].[event_id]
LEFT JOIN [tblStands] ON [tblStands].[id] = [tblTickets].[stand_id]
LEFT JOIN [tblAdmissionDates] ON [tblAdmissionDates].[id] = [tblTickets].[admission_date_id]
LEFT JOIN [tblBookingDates] ON [tblBookingDates].[id] = [tblTickets].[booking_date_id]
LEFT JOIN [tblTicketConcessions] ON [tblTicketConcessions].[id] = [tblTickets].[ticket_concession_id]
LEFT JOIN [tblBookingQuantities] AS [tblBookingMinQuantities] ON [tblBookingMinQuantities].[id] = [tblTickets].[booking_min_quantity_id]
LEFT JOIN [tblBookingQuantities] AS [tblBookingMaxQuantities] ON [tblBookingMaxQuantities].[id] = [tblTickets].[booking_max_quantity_id]
LEFT JOIN [tblMemberships] ON [tblMemberships].[id] = [tblTickets].[membership_id]
WHERE 1=1
[B]AND [tblEvents].[id]=2
[B]AND [tblStands].[id]=3
--AND [tblAdmissionDates].[id]=@admissionDateId
--AND [tblBookingDates].[id]=@bookingDateId
--AND [tblTicketConcessions].[id]=@concessionId
--AND [tblBookingMinQuantities].[id]=@bookingMinQuantityId
--AND [tblBookingMaxQuantities].[id]=@bookingMaxQuantityId
--AND [tblMemberships].[id]=@membershipId
GROUP BY
[tblCombinations].[id],
[tblTickets].[id],
[tblTickets].[price], [tblTickets].[availability], [tblTickets].[ticket_open],
[tblCombinations_Tickets].[quantity],
[tblEvents].[event_name],
[tblEvents].[event_open],
[tblStands].[stand_name],
[tblStands].[stand_open],
[tblAdmissionDates].[admission_start_date],
[tblAdmissionDates].[admission_end_date],
[tblAdmissionDates].[date_open],
[tblBookingDates].[booking_start_date],
[tblBookingDates].[booking_end_date]
) as [tblT]
JOIN [tblCombinations] as [tblC] on [tblT].[id]=[tblC].[id]
LEFT JOIN [tblTickets] as [tblT2] on [tblT].[TicketID]=[tblT2].[id]
I want to turn this SQL into a stored proc; there are currently about 8 parameters that I want to pass into it. The field value for each will be either NULL or a positive integer, and the paramater will be passed in as an integer.
If the passed parameter value is a positive integer then it should return all records where the corresponding field value matches that integer. If the passed parameter is 0, it should return all rows regardless of whether the field value is an integer or NULL.
And I can't for the life of me figure out how to do it. Do I need an IF statement in there or something?
:confused:
View 2 Replies
View Related
Feb 13, 2008
I am working with a large application and am trying to track down a bug. I believe an error that occurs in the stored procedure isbubbling back up to the application and is causing the application not to run. Don't ask why, but we do not have some of the sourcecode that was used to build the application, so I am not able to trace into the code.
So basically I want to examine the stored procedure. If I run the stored procedure through Query Analyzer, I get the following error message:
Msg 2758, Level 16, State 1, Procedure GetPortalSettings, Line 74RAISERROR could not locate entry for error 60002 in sysmessages.
(1 row(s) affected)
(1 row(s) affected)
I don't know if the error message is sufficient enough to cause the application from not running? Does anyone know? If the RAISERROR occursmdiway through the stored procedure, does the stored procedure terminate execution?
Also, Is there a way to trace into a stored procedure through Query Analyzer?
-------------------------------------------As a side note, below is a small portion of my stored proc where the error is being raised:
SELECT @PortalPermissionValue = isnull(max(PermissionValue),0)FROM Permission, PermissionType, #GroupsWHERE Permission.ResourceId = @PortalIdAND Permission.PartyId = #Groups.PartyIdAND Permission.PermissionTypeId = PermissionType.PermissionTypeId
IF @PortalPermissionValue = 0BEGIN RAISERROR (60002, 16, 1) return -3END
View 3 Replies
View Related
Sep 27, 2000
I am writing a (very simple) stored procedure that counts records on a table. The stored proc is as follows:
------------------------------------------
CREATE PROCEDURE GetRecordCount
@TableName varchar(30),
@NumRecs int OUTPUT
AS
DECLARE @sqlcmd varchar(250)
SET @sqlcmd = 'SELECT @NumRecs = COUNT(email)
FROM ' + @TableName + 'WHERE Include = "Y"'
EXEC (@sqlcmd)
------------------------------------------
The intention is to return variable @NumRecs. I am calling the routine from Query Analyzer as follows:
DECLARE @MyNumber int
EXEC GetRecordCount "MYTABLE", @NumRecs = @MyNumber OUTPUT
PRINT @MyNumber
When I execute the above line, I get an error message:
Server: Msg 137, Level 15, State 1, Line 0
Must declare the variable '@NumRecs'.
If I replace the "SET @sqlcmd = .." AND "EXEC(.." with:
SELECT SELECT @NumRecs = COUNT(email)
FROM MyTable etc.
i.e. without passing the table name, the process works fine. How can I construct an sql command using a parameter?
View 2 Replies
View Related
Feb 12, 2014
I have a SQL query like this:
Select * from myTable where myTable_ID in (2,6,7,9)
I want to build the list of values that are in parenthesis, in my VB code and pass it in through a parameter, so it's like this:
Select * from myTable where myTable_ID in (@myValues)
Is this possible? I tried it where myValues = '2,6,7,9' but am getting a conversion error. I'm starting to believe it's not possible to do what I'm trying to do. Is there another way?
View 2 Replies
View Related
Feb 3, 2015
We're using MS Access 2010 as a frontend to an SQL server back-end. From Access, I can run read-only queries and pass-through queries. I'd like to use a local Access table as part of a join to server data. As a non-pass-through query, it's slow; about 5 min to join to 2 other tables.
I could use VBA to turn the local table into part of a pass-through query, with a large in() statement, or several where x='' ors but the local table may have 50000 entries in it. Is there a good or right way to pass this data in the query if I don't have write access to the server?
View 2 Replies
View Related
Aug 24, 2006
I am having trouble executing a stored procedure on a remote server. On my
local server, I have a linked server setup as follows:
Server1.abcd.myserver.comSQLServer2005,1563
This works fine on my local server:
Select * From [Server1.abcd.myserver.comSQLServer2005,1563].DatabaseName.dbo.TableName
This does not work (Attempting to execute a remote stored proc named 'Data_Add':
Exec [Server1.abcd.myserver.comSQLServer2005,1563].DatabaseName.Data_Add 1,'Hello Moto'
When I attempt to run the above, I get the following error:
Could not locate entry in sysdatabases for database 'Server1.abcd.myserver.comSQLServer2005,1563'.
No entry found with that name. Make sure that the name is entered correctly.
Could anyone shed some light on what I need to do to get this to work?
Thanks - Amos.
View 3 Replies
View Related
Jun 15, 2006
Hi All,Quick question, I have always heard it best practice to check for exist, ifso, drop, then create the proc. I just wanted to know why that's a bestpractice. I am trying to put that theory in place at my work, but they areasking for a good reason to do this before actually implementing. All Icould think of was that so when you're creating a proc you won't get anerror if the procedure already exists, but doesn't it also have to do withCompilation and perhaps Execution. Does anyone have a good argument fordoing stored procs this way? All feedback is appreciated.TIA,~CK
View 3 Replies
View Related
Sep 8, 2015
I have a requirement, we need to pass comma separated list using powershell script.
How can we achieve the above scenario?
View 3 Replies
View Related
Feb 23, 2007
I have an ASP that has been working fine for several months, but itsuddenly broke. I wonder if windows update has installed some securitypatch that is causing it.The problem is that I am calling a stored procedure via an ASP(classic, not .NET) , but nothing happens. The procedure doesn't work,and I don't get any error messages.I've tried dropping and re-creating the user and permissions, to noavail. If it was a permissions problem, there would be an errormessage. I trace the calls in Profiler, and it has no complaints. Thedatabase is getting the stored proc call.I finally got it to work again, but this is not a viable solution forour production environment:1. response.write the SQL call to the stored procedure from the ASPand copy the text to the clipboard.2. log in to QueryAnalyzer using the same user as used by the ASP.3. paste and run the SQL call to the stored proc in query analyzer.After I have done this, it not only works in Query Analyzer, but thenthe ASP works too. It continues to work, even after I reboot themachine. This is truly bizzare and has us stumped. My hunch is thatwindows update installed something that has created this issue, but Ihave not been able to track it down.
View 1 Replies
View Related
Feb 28, 2008
Hello,
In the security GUI on a specific database, for a specific user, I am trying to 'remove' a proc from the list of securables. However, the 'remove' button is disabled when I select the proc to remove. There are no 'Explicit Permissions' selected for the proc.
I am a sysadmin on the server. Why cannot I not remove the proc from the list of securables for this database user?
Thank you for your help!
cdun2
View 3 Replies
View Related
Nov 30, 2015
I have created a ssrs report which connects to vertica database through odbc connection. When I try to pass parameter value through parameter (e.g.: column name IN (@parameter) ) then getting error message in query designer prompting "Error in list of values in IN clause. Unable to parse query text. ". Using sql server 2012 , visual studio 2010 version and HP Vertica 7.1 .
View 6 Replies
View Related
Feb 20, 2003
I have seen this done by viewing code done by a SQL expert and would like to learn this myself. Does anyone have any examples that might help.
I guess I should state my question to the forum !
Is there a way to call a stored proc from within another stored proc?
Thanks In Advance.
Tony
View 1 Replies
View Related
Jan 13, 2006
Hi all,
I have a stored procedure "uspX" that calls another stored procedure "uspY" and I need to retrieve the return value from uspY and use it within uspX. Does anyone know the syntax for this?
Thanks for your help!
Cat
View 5 Replies
View Related
Jan 20, 2004
Hi all
I have about 5 stored procedures that, among other things, execute exactly the same SELECT statement
Instead of copying the SELECT statement 5 times, I'd like each stored proc to call a single stored proc that executes the SELECT statement and returns the resultset to the calling stored proc
The SELECT statement in question retrieves a single row from a table containing 10 columns.
Is there a way for a stored proc to call another stored proc and gain access to the resultset of the called stored proc?
I know about stored proc return values and about output parameters, but I think I am looking for something different.
Thanks
View 14 Replies
View Related
Aug 30, 2007
I would like to know if the following is possible/permissible:
myCLRstoredproc (or some C# stored proc)
{
//call some T SQL stored procedure spSQL and get the result set here to work with
INSERT INTO #tmpCLR EXECUTE spSQL
}
spSQL
(
INSERT INTO #tmpABC EXECUTE spSQL2
)
spSQL2
(
// some other t-sql stored proc
)
Can we do that? I know that doing this in SQL server would throw (nested EXECUTE not allowed). I dont want to go re-writing the spSQL in C# again, I just want to get whatever spSQL returns and then work with the result set to do row-level computations, thereby avoiding to use cursors in spSQL.
View 2 Replies
View Related
Oct 14, 2007
I am calling a stored procedure (say X) and from that stored procedure (i mean X) i want to call another stored procedure (say Y)asynchoronoulsy. Once stored procedure X is completed then i want to return execution to main program. In background, Stored procedure Y will contiue his work. Please let me know how to do that using SQL Server 2000 and ASP.NET 2.
View 3 Replies
View Related
Apr 23, 2008
Hello friends......How are you ? I want to ask you all that how can I do the following ?
I want to now that how many ways are there to do this ?
How can I call one or more stored procedures into perticular one Stored Proc ? in MS SQL Server 2000/05.
View 1 Replies
View Related
Apr 29, 2008
How do I search for and print all stored procedure names in a particular database? I can use the following query to search and print out all table names in a database. I just need to figure out how to modify the code below to search for stored procedure names. Can anyone help me out?
SELECT TABLE_SCHEMA + '.' + TABLE_NAME
FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_TYPE = 'BASE TABLE'
View 1 Replies
View Related
Dec 18, 2007
Hi Peeps
I have a SP that returns xml
I have writen another stored proc in which I want to do something like this:Select FieldOne, FieldTwo, ( exec sp_that_returns_xml ( @a, @b) ), FieldThree from TableName
But it seems that I cant call the proc from within a select.
I have also tried
declare @v xml
set @v = exec sp_that_returns_xml ( @a, @b)
But this again doesn't work
I have tried changing the statements syntax i.e. brackets and no brackets etc...,
The only way Ive got it to work is to create a temp table, insert the result from the xml proc into it and then set @v as a select from the temp table -
Which to be frank is god awful way to do it.
Any and all help appreciated.
Kal
View 3 Replies
View Related
Feb 22, 2007
Hi,
i need to insert a record 1 or more times, depending of a variable in code-behind:dim amount as integeramount= value (e.g. 3)
My problem is: how to pass that variable to the stored procedure?I tried with this but nothing happens:
comd.Parameters.Add("@amount", SqlDbType.NVarChar, 10).Value = amount_of_details
Maybe is my stored procedure wrong?
Thanks
T.
Here is it:----------
ALTER PROCEDURE dbo.insert_table (@field1 nvarchar(10),...)ASDeclare @iLoopNumber intDeclare @amount intBEGIN TRAN
SET @iLoopNumber = 1
SET @amountr
While (@iLoopNumber <= @amount)
BEGIN
INSERT INTO table(field1,...)
VALUES (....))
SET @iLoopNumber = @iLoopNumber +1
End
COMMIT TRAN
View 3 Replies
View Related
Aug 11, 2007
How do I pass values from my ASP.NET page code into my Stored Procedure, to become parameters to be used in my Stored Proc?
Much thanks
View 2 Replies
View Related
Sep 19, 2005
Hi I have an if clause in my code to add the final parameter value to send to the database.
If Page.User.IsInRole("MICMS") Then
cmdCheckUser.Parameters.Add("@C_ID", 0)
Else
cmdCheckUser.Parameters.Add("@C_ID", Session("C_ID"))
End If
If the user is in the role, the error is triggered saying that @C_ID
is expected by the stored procedure. If i then change the value from 0
to 10, the stored procedure works fine.Is there any reason that the stored procedure is failing when the value 0 is used and not when any other value is used?Thanking you in advance.
View 1 Replies
View Related
Nov 30, 2005
hi,i am passing a xml file name to the stored procedure. the SP parses the file. but it is giving the error' INVALID AT THE TOP LEVEL OF THE DOCUMENT 'I expect this because of + and - in the xml file bafore the parent tags.how can i do the parser to eliminate these.
View 1 Replies
View Related
Mar 9, 2006
How can I pass a parameter to a stored procedure using Visual Web Developer 2005? I have created a SQLDataSource that calls the SP.
Thanks
--R
View 1 Replies
View Related
May 7, 2001
I have a two dimensional array in Front end (As for example Array contains 20 ECode and EmployeeName). I have a Stored Proc. where i have written a statement for inserting theses value in a table. so how i will pass this array to SP. Pls. give exmp. for Front end and SP also.
View 3 Replies
View Related
