hello at everybody well i have a problem. with in a package i defined a bollean variable with the name "x" and with a default value FALSE.
i created a configuaration file that contains the variable "x" as [user::x]. when i deploy the package to a server and i try to execute the package putting to the set values TRUE fror the x variable it doesnt work.
what can i do??
thnxs
Hi,
I am planning to develop a single package that will download files from ftp server, move the files to internal file server and upload it in the database. But I want to run this package for multiple ftp file providers. For each provider the ftp server might be different and the transformation to upload the files into a database table might be different.
So can I create a single package and then multiple configuration files (xml), which will contain the details fo the ftp file providers and then pass the xml file as a parameter while executing the package. The reason being that the timings of fetching the files is different for each ftp file provider and hence cannot be combined into one.
Is this possible?
Thanks for your help.
$wapnil
I need to have scheduler passing the latest datetime to my Package at the time it kicks it off.
Also, How would I receive the argument in my package ? I mean, in some variable or there are some other construct in SSIS.
Any help in this will sincerely be appreciated.
Fahad
I've created a varible timeStamp that I want to feed into a stored procedure but I'm not having any luck. I'm sure its a simple SSIS 101 problem that I can't see or I may be using the wrong syntax
in Execute SQL Task Editor I have
conn type -- ole db
connection -- some server
sql source type -- direct input
sql statement -- exec testStoredProc @timeStamp = ?
if I put a value direclty into the statement it works just fine: exec testStoredProc '02-25-2008'
This is the syntax I found to execute the procedure, I don't udnerstand few things about it.
1. why when I try to run it it changes it to exec testStoredProc @timeStamp = ? with error: EXEC construct or statement is not supported , followed by erro: no value given for one or more requreid parameters.
2. I tired using SQL commands exec testStoredProc @timeStamp and exec testStoredProc timeStamp but nothing happens. Just an error saying unable to convert varchar to datetime
3. Also from SRS I usually have to point the timeStamp to @timeStamp and I dont know how to do that here I thought it was part of the parameter mapping but I can't figure out what the parameter name and parameter size should be; size defaults to -1.
Thank you, please help.
I am using VB6 and SQL Server 6.5. I want to pass a boolean to a SQL Server stored procedure. The code below is the main part that tries to pass 'True' to the stored procedure, but an error occurs when the line rst.Open.... is reached ? The error is as follows: The application is using arguments that are of the wrong type, are out of acceptable range, or are in conflict with one another.
I have tried putting 'True' directly in the rst.Open... line instead of assigning it to a boolean variable but the same error occurs.
The stored procedure works fine when run in SQL Server.
Can anyone help ? Please.
complete = True
Set rst = New ADODB.Recordset
rst.CursorType = adOpenForwardOnly
rst.LockType = adLockReadOnly
rst.Open "usp_CompleteUID_sel (" & complete & ")", UIDCon, , , adCmdStoredProc
Do While Not rst.EOF
lst_pastUIDs.AddItem (rst.Fields(1))
rst.MoveNext
Loop
rst.Close
Hi I was hoping that someone might be able to help me with this.
I'm trying to figure out why my VB.net code below generates 0 or 1 but doesn't insert it when I can execute my stored procedure with: exec sp 0
myParm = myCommand.Parameters.Add("@bolProMembCSNM", SqlDbType.Bit)
myParm.Value = IIf(CBool(rblProMembCSNM.SelectedItem.Value) = True, 1, 0)
I've tried everything I used to use with Classic ASP and am stumped now.
Any ideas? I will have to do this for numerous controls on my pages.
Thanks in advance for any advice.
Hi,
I have a Summary report and a Detail (drillthrough) report.
the summary report displays.
Summary report
Code Snippet
Adult | Male | Count
-----------------------------
Yes | Yes | 50
Yes | No | 9
No | Yes | 20
No | No | 50
------------------------------
| 129
When the user clicks on the hightlighted count it links to the Details report displaying each of the records referenced.
The detail report uses 2 boolean parameters Adult & Male, this works perfectly for the first 4 lines displayed, however if the user clicks on the total value to display all the records, i'm unable to provide the NULL value.
Any ideas?
Hi Folks,
I'm having a problem showing my boolean default parameter on report server in our test environment.
The report server shows my boolean parameter with a yes and no radio button. I assigned my boolean parameter with a 'No' default. The default shows and runs fine when I run the report within Visual Studio.(I hope I'm using the correct terminology.) However, on the report server the 'No' radio button is not checked by default. What am I doing wrong?
Thanks in advance for your assistance.
I have a boolean field.
I want the users to be able to select
show all marked YES
show all marked NO
show all.
How can this be accomplished?
Thanks
Hello, I am trying to use a boolean parameter to filter data in a table, but there is something I am missing.
Basically I want something like this:
I have a boolean parameter, "EP", and I have a filter set on my table as:
Expression Operator Value
=Fields!REFERRAL_SOURCE.Value = IIF (Parameters!EP.Value, "1297", ????)
Using the filter tab, I can't specify an expression for the 'Operator' so I was trying to work it out using either '=' or 'like'. What needs to go into the ???? in order for the referral source to be "not 1297" (i.e. the inverse of the filter)?
Or, am I completely missing an easy way to do this?
Thanks.
Hello,
Can anyone say me how i can make a Report with Parameter Boolean field,and as Default Value true and False. ( Both ).
With Multivalue and in the Query = Field in (@BoolPara) have i a Error in the Query.
Thanks
I have got a stored procedure with a parameter on a boolean field. When the parameter is passed down I must retrieve records according to the boolean value. That is if it is true retrieving records with the true in that field, if it is false retrieving records with false. And if no parameters is passed down just retrieve all records either with true or false. I have done something similar with integer fields and it works but in that case I wasn't able to make it working.
See at the following sample I am expecting when executing the 3rd time my below to return 4 and it returns 0
CREATE TABLE #temp
( Id int, Name char(30), YesNo bit )
INSERT INTO #temp (Id, Name,YesNo)
Select 1, 'a', 0
INSERT INTO #temp (Id, Name,YesNo)
[Code] ....
This is for Microsoft Server SQL 2012.
I'm trying to create a WHERE clause that will have different results depending on a parameter that is entered. For example, if you put in a number, it will only calculate the rows where the column ID matches that number. However, if you put in 0, which doesn't exist in that column ID, it will instead calculate all the data in the table.
So the below would be a very basic idea of what I'm trying to do, but I'm not sure how to do it with proper syntax.
WHERE IF ID=0, THEN do this
ELSE do this AND ID=#
How to call Boolean/Text parameter in SSRS Query.
Parameter (Cust )Properties:
My Query:
SELECT dbo.incident.incident_ref, Customer.cust_n,incident.date_logged FROM
incident INNER JOIN Customer ON incident.incident_id = Customer.cust_id
WHERE incident.date_logged BETWEEN @date_from AND DATEADD(day, 1, @date_to)
I need to use a condition here to display customer based on my selection in dropdown list (Include ABC )
I have two report , first is main report which is matrix and have one parameter User_ids which is multi value selection and my second report is basic chart of user_wise performance.
Now, my main report (matrix ) works fine for Multiple selection of users and i have putted one textbox on main report chart which has action properties set for chart report, when user click on chart button it must goes to chart with user selected in main report. Now , i have used expression for parameter to send it like ..
=join(parameter!user_id!value,",") which pass selected value to chart
And when I am selecting single user it passing that value to chart parameter list but , when it is more than one user it errors with conversion failed when converting the nvarchar value '121,128' to data type int. But my chart also works when passing 121,128 in user parameter in preview of report .
I have a gridview connected to a sqldatasource, and it works pretty good. It gives me the subsets of the information that I need. But, I really want to let them choose all the companies and/or any status. What's the best way to get all the values in the gridview...besides removing the filters :)
I thought the company would be easy, I'd just set the selected value to blank "", and then it'd get them all....but that's not working. And, for the boolean, I have no idea to get the value without having a separate query.
(tabs_done=@tabsdone) and (company like '%' + @company + '%')1 <asp:DropDownList ID="drpdwnProcessingStatus" runat="server">
2 <asp:ListItem Value="0">Open</asp:ListItem>
3 <asp:ListItem Value="1">Completed</asp:ListItem>
4 </asp:DropDownList>
5
6
7 <asp:DropDownList ID="drpdwnCompany" runat="server">
8 <asp:ListItem Value="">All</asp:ListItem>
9 <asp:ListItem Value="cur">Cur District</asp:ListItem>
10 <asp:ListItem Value="jho">Jho District</asp:ListItem>
11 <asp:ListItem Value="sea">Sea District</asp:ListItem>
12 <asp:ListItem Value="san">Net District</asp:ListItem>
13 <asp:ListItem Value="sr">Research District</asp:ListItem>
14 </asp:DropDownList>
15
16
17 <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:HRFormsConnectionString %>"
18 SelectCommand="SELECT DISTINCT [id], [lastname], [company] FROM [hr_term] hr where (tabs_done=@tabsdone) and (company like '%' + @company + '%')">
19 <SelectParameters>
20 <asp:ControlParameter ControlID="drpdwnProcessingStatus" DefaultValue="0" Name="tabsdone" PropertyName="SelectedValue" />
21 <asp:ControlParameter ControlID="drpdwnCompany" DefaultValue="" Name="company" PropertyName="SelectedValue" />
22 </SelectParameters>
23 </asp:SqlDataSource>
24
Using SQL Server 2008R2 and Report Builder 3.0..I have an action set in a text box of a table. My intent is to pass the value of that text box (which is variable) to a sub-report in a popup window. Here's my code: URL....The parameter of the report I'm trying to open is @SONum.I'm guessing my error is involved in the formatting of how the value of the parameter is being passed. I've also seen examples where the report server and report values were parameterized, but I don't know where to define
Parameters!ServerAddress.Value anywhere.Do I need to have something set up a certain way within the report I'm opening? Here's the report Parameter settings on the report I'm trying to open.
Hi friends,
I have a for each loop that populates from a set of flat files into a Sql Server table, I run the Flat file Import via a dts package embedded into Execute DTS 2000 Task. I want to pass the Sourcefile Name that is fetched by the For Each Loop to assign it Global Variable in DTS. how this can be made ?
Thanks
Subhash Subramanyam
I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
hi,
I am interested in Passing value from a child Package variable to the Parent package that calls it in ssis.
I am able to call the Child package using the execute package task and use Configurations to pass values from the parent variable to the child, but I am not able to pass the value from the child to the parent.
I have a variable called datasetId in both the parent and child. it gets computed in the child and needs to be passed to the parent...
Any suggestions?
Thanks for any help in advance..
smathew
I want to loop through a recordset of email addresses, and for each value in the recordset, I want to perform a set of task which includes creating an Excel spreadsheet and emailing it through to those email addresses.
I have 2 DTS package.
Package 1 - This contains an ActiveXScript task. The purpose of this package is to do the looping through of the recordset, and passing the email address variable to package 2.
Package 2 - Receives the email address from package 1. Package 2 contains the creating Excel spreadsheet and emailing it through to the recipients function.
I am having difficulty passing the variable from package 1 to package 2.
The code I have to date for the ActiveXScript task in package 1 is:
'************************************************* *********************
' Visual Basic ActiveX Script
'************************************************* ***********************
Function Main()
Dim oPackage
Dim oStep
Dim oTask
Dim oCustTask
Dim oGlobal
'Initialise package
Set oPackage = CreateObject("DTS.Package2")
Set oStep = oPackage.Steps.New
oStep.Name = "TestStep"
Set oTask = oPackage.Tasks.New ("DTSExecutePackageTask")
Set oCustTask = oTask.CustomTask
oCustTask.Name = "TestCustTask"
oStep.TaskName = oCustTask.Name
oPackage.Steps.Add oStep
oCustTask.FileName = "C:TempVeraTest1.dts"
oPackage.Tasks.Add oTask
set oGlobal = oPackage.GlobalVariables.New("CurrentAirlineCode")
oGlobal.value = "SIA"
oPackage.GlobalVariables.Add oGlobal
'Execute package
oPackage.Execute
Main = DTSTaskExecResult_Success
End Function
This does not work. Can anyone please help?
Thanks very much in advance.
Hi,
I have a stored proc as follows:
Create stored procedure sp_test
@Cno nvarchar (1000) AS
SELECT * FROM Contracts WHERE Cno IN (@Cno)
How do I actually pass the parameters to the stored proc?
sp_test "'cn01','cn02','cn03','cn04'" doesn't work.
In VB.NET this doesn't work either:
dim s as string = "'cn01','cn02','cn03','cn04'"
cmd.parameters.add(new sqlparameter("@Cno",nvarchar,1000))
cmd.parameters("@Cno").value = s
I don't want to parse the string inside the proc and then Exec the parsed string.
TIA
Jeremy Holt
Hi ,
I have this situation,I need to store results of a Select Count(*) from TableA to a parameter and only if the value of the count(*) is greater than 50,000,a notification mail would be sent out to the table owner.Currently this is what I have done:
1) Use SQL task to include "Select Count(*) from TableA"
2) In parameter mapping tab of SQL Task, define the following
Parameter name : Table::Count
Direction: Input
Data Type: Numeric
Parameter Name : @Count
3) I have connected the SQL Task to a Send Mail Task [ Only If @count>50 000, then a mail should be sent out]
4) The constraints has been set as
Evaluation Operation : Expression and Constraints
Value: Success
Expression : @Count >"50000"
In SSIS tab > Variable
I have set the following
Variable Name : Count
DataType : Int32
Can someone advise me where I am going wrong, as when I execute the SQL Task turns greens and ends.Even when the count of tableA is greater than 50 000, no mails I sent out[send mail task does not get executed]
Thank You in Advance
how can i pass report parameter via URL?
my jump to URL link is:
http://itreportsme096/Reports/Pages/Report.aspx?ItemPath=%2fDevelopment%2fhoneylette%2fdetailed+phone+calls
and i want to pass two parameters: billingmonth and phoneno
how can i do that?
I have a stored procedure named "processInventory" like the following.Depending on the passed in parameters, I would like to add a WHEREclause for "select" action. For example, if any varchar type ofparameter is passed in, the where clause would use "LIKE" operator. Forexample, "Select * from Main where [s/n] like @Serial. All other typeswill use "=" operator. For example, "Select * from Main where MAKE =@Make and Type = @type".How could this be achieved? Thanks.CREATE PROCEDURE processInventory@Action varchar(7),@ControlNumber int = null,@AssetTag int = null,@Serial varchar(50) = null,@Description varchar(50) = null,@Make int = null,@Type int = null,@Model int = null,@Status int = null,@Networked bit = null,@LoginName varchar(50) = null,@Shared bit = null,@Org varchar(15) = null,@RecordDate datetime = null,@LastUpdate datetime = null,@ManufactureDate datetime = null,@Comment ntext = nullASdeclare @processError intset @processError = 0if @Action = 'Select' goto selectInventoryelseIf @Action = 'Update'beginif @ControlNumber = null return(1) --Required parameter value notspecifiedelsegoto updateInventoryendelseif @Action = 'Insert'beginif @Serial = null return(1) --Required parameter value notspecifiedelsegoto InsertInventoryendelseif @Action = 'Delete'beginif @ControlNumber = null return(1) --Required parameter valuenot specifiedelse goto deleteInventoryendselectInventory:if @Serial <> nullbeginselect * from Main where [S/N] like @Serialif @@Error<>0beginset @processError = @@Errorreturn @processErrorendendelseif @ControlNumber <> nullbeginselect * from Main where ControlNumber = @ControlNumberif @@Error <>0beginset @processError = @@Errorreturn @processErrorendendelseselect top 100* from MainupdateInventory:update MAINset [Org Asset Tag] = @AssetTag, [S/N] = @Serial, [Description]= @Description, Make = @Make, Type = @Type,Model = @Model, Status = @Status, Networked = @Networked,LoginName = @LoginName, Shared = @Shared,Org = @Org, [Date Of Record] = @RecordDate, [Date LastUpdated] = @LastUpdate, [Manuf Date] = @ManufactureDate,Comments = @Commentwhere ControlNumber = @ControlNumberif @@ERROR <> 0beginset @processError = @@ERRORreturn @processErrorendelsereturn(0) -- successful updateinsertInventory:insert MAIN([Org Asset Tag], [S/N], [Description], Make, Type,Model, Status, Networked, LoginName, Shared,Org, [Date Of Record], [Date Last Updated], [ManufDate],Comments)values(@AssetTag, @Serial, @Description, @Make, @Type, @Model,@Status, @Networked, @LoginName, @Shared,@Org, @RecordDate, @LastUpdate, @ManufactureDate,@Comment)if @@ERROR <> 0beginset @processError = @@ERRORreturn @processErrorendelse return(0) -- successful insertdeleteInventory:delete MAIN where ControlNumber = @ControlNumberif @@ERROR <> 0beginset @processError = @@ERRORreturn @processErrorendelse return(0) -- successful deleteGO
View 4 Replies View RelatedI don't understand how to pass a parameter to a dts package from another. In SQL 2000 you can map a variable with a variable of the package you will call.
View 10 Replies View RelatedHi all
I need to pass parameters when I call a .SQL file.
Is there a way to do this in SQL Server?
thanks!!!!
Hi guys...
As of now I'm working on a certian report which needs to pass a certain parameter to another dataset... I'm refering to the dataset of the same report. Can anyone tell me how this is done? I really need to know it to finish my report...
Thanks a bunch in advance!
Request is to have a Requirement number from the requirement form generate a report in Reporting Services with the requirement number as a filter.
I can set up the parameter - how does the value get there? Should I be asking this question in the Visual C# group?
Thanks!
Terry B
My data table contains a column (a foreign key) with numbers from 0 and up. (it could be null or a number. I used ISNULL to convert it.) I want to be able to select in three ways. 1) equals zero (or is null)2) greater than zero (or is not null)3) equal to a specific number.How do I do this?My application setup is Presentation Layer, BLL, DAL and Sql Server.I don't want to create another Query because this is only part of a larger query with other parameters.If I could just do something like @IDOperator @IDValue in the Filter of the Sql it would be great.
View 2 Replies View RelatedHello,
Can someone kindly point out what is wrong with the following code file. I'm trying to:
- fill a dropdown from a db on page load (this works!)
- when user selects from the list and hits a button, pass the dropdown value to a second query
- use the second query to make another call to the db and fill a data grid
In the code below, if I swap an actual value (eg '1005') into the command and comment out the .Parameter.Add statements, the dategrid is filled sucessfully. Otherwise, when the button is pressed, nothing is displayed.
Thanks
PS comments about my coding approach are welcome - I'm new to aspx...
<%@ Language="VBScript" Debug="true"%>
<%@ Import Namespace="System.Data" %>
<%@ Import Namespace="System.data.SqlClient" %>
<html>
<head>
<script language="vb" runat="server">
Dim dbConnection As SqlConnection
Dim ds_Teams,ds_Agents As DataSet
Dim sqlCmd_Teams,sqlCmd_Agents As SqlDataAdapter
Dim dbConn = "server=csacd01;uid=mpierce;pwd=cabledog;database=clearviewacd"
Dim sql_select_teams = "" & _
"SELECT team_no, team_name " & _
"FROM dbo.team " & _
"WHERE (team_status = 'Curr')"
Dim sql_select_agents = "" & _
"SELECT last_name + ', ' + first_name AS name, agent_no " & _
"FROM dbo.users " & _
"WHERE (team_no = @Team) AND (NOT (agent_no = '1029')) " & _
" AND (NOT (last_name IS NULL)) " & _
" AND (NOT (first_name IS NULL)) " & _
" AND (NOT (first_name = 'FirstName')) " & _
"ORDER BY last_name"
Dim teamList = "teamList"
Dim agentList = "agentList"
Sub Page_Load(Sender As Object, E As EventArgs)
if not (IsPostBack)
ds_Teams = new DataSet()
dbConnection = New SqlConnection(dbConn)
sqlCmd_Teams = New SqlDataAdapter(sql_select_teams, dbConnection)
sqlCmd_Teams.Fill(ds_Teams, teamList)
dbConnection.close()
dropdownlist_Teams.DataSource=ds_Teams.Tables(teamList).DefaultView
dropdownlist_Teams.DataBind()
end if
End Sub
sub Get_Agents(Sender As Object, E As EventArgs)
ds_Agents = new DataSet()
dbConnection = New SqlConnection(dbConn)
sqlCmd_Agents = new SqlDataAdapter(sql_select_agents, dbConnection)
sqlCmd_Agents.SelectCommand.Parameters.Add(new SqlParameter("@Team", SqlDbType.NVarChar,4))
sqlCmd_Agents.SelectCommand.Parameters("@Team").Value = dropdownlist_Teams.DataValueField
sqlCmd_Agents.Fill(ds_Agents,agentList)
dbConnection.close()
datagrid_Agents.DataSource=ds_Agents.Tables(agentList).DefaultView
datagrid_Agents.DataBind()
end sub
</script>
</head>
<body>
<form runat="server">
<asp:DropDownList id="dropdownlist_Teams" runat="server"
DataTextField="team_name"
DataValueField="team_no">
</asp:DropDownList>
<input type="submit" onserverclick="Get_Agents" value="Get Agents" runat="server"><br />
<ASP:DataGrid id="datagrid_Agents" runat="server"
Width="500"
BackColor="#ccccff"
BorderColor="black"
ShowFooter="false"
CellPadding=3
CellSpacing="0"
Font-Name="Verdana"
Font-Size="8pt"
HeaderStyle-BackColor="#aaaadd"
EnableViewState="false"
/>
</form>
</body>
</html>
Interesting problem, selecting and updating (with reference to a Form View) works great. Whenever I try to delete I get this error:Must declare the variable '@template_id'.
Description: An
unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the
error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Must declare the variable '@template_id'.
Here is my code:<asp:SqlDataSource ID="SqlTemplateDS" runat="server"SelectCommand="SELECT [template_id], [client_id], [language], [label], [email_default], [email_template], [event_template] FROM [CMT] ORDER BY [template_id]"DeleteCommand="DELETE FROM CMT WHERE (template_id = @template_id)" ConnectionString="<%$ ConnectionStrings:BrandMSConnectionString %>"> </asp:SqlDataSource><asp:GridView ID="grdTemplates" runat="server" AutoGenerateColumns="False" DataKeyNames="template_id" DataSourceID="SqlTemplateDS" Font-Names="Verdana" Font-Size="Small" ForeColor="Black" Width="100%" OnSelectedIndexChanged="grdTemplates_SelectedIndexChanged" CellPadding="2"> <Columns> <asp:BoundField DataField="template_id" HeaderText="ID" ReadOnly="True" SortExpression="template_id" /><asp:BoundField DataField="client_id" HeaderText="Client" SortExpression="client_id" /><asp:BoundField DataField="language" HeaderText="Language" SortExpression="language" /><asp:BoundField DataField="label" HeaderText="Label" SortExpression="label" /><asp:CheckBoxField DataField="email_default" HeaderText="Default" SortExpression="email_default" /><asp:CheckBoxField DataField="email_template" HeaderText="Email" SortExpression="email_template" /><asp:CheckBoxField DataField="event_template" HeaderText="Event" SortExpression="event_template" /> <asp:TemplateField HeaderText="Options"><ItemTemplate> <asp:LinkButton ID="btnModify" CommandName="Select" runat="server" ForeColor="Blue">Edit</asp:LinkButton> | <asp:LinkButton ID="btnDelete" CommandName="Delete" runat="server" ForeColor="Blue">Delete</asp:LinkButton></ItemTemplate></asp:TemplateField> </Columns><HeaderStyle BackColor="Khaki" /><AlternatingRowStyle BackColor="Beige" /></asp:GridView>Any ideas?Chris
why this wont work?error: Exception Details: System.Data.SqlClient.SqlException: Procedure or Function 'test1' expects parameter '@cid', which was not supplied..................................................................................ASPX CODE: string cid12; cid12 = "user5"; // Connection ConnectionStringSettings mysettings; mysettings = System.Configuration.ConfigurationManager.ConnectionStrings["dbase1_connection"]; string myConnectionString = mysettings.ConnectionString; SqlConnection conn1 = new SqlConnection(myConnectionString); SqlCommand cmd = new SqlCommand(); cmd.Connection = conn1; cmd.CommandText = "test1"; cmd.CommandType = CommandType.StoredProcedure; SqlParameter param = cmd.Parameters.Add("@cid", SqlDbType.NChar, 20); param.Direction = ParameterDirection.Input; param.Value = cid12; conn1.Open(); cmd.ExecuteNonQuery(); conn1.Close();.................................................................................STORED PROCEDURE:ALTER PROCEDURE dbo.test1 ( @cid nvarchar(20) )AS /* SET NOCOUNT ON */ select tech_id, customer_id, issue_main from [case] where customer_id = @cid --GO RETURN.................................................................................im using asp.net, C#, and sql expressforgive me. im new to this .netPLS HELP
View 1 Replies View Related