I am using VB6 and SQL Server 6.5. I want to pass a boolean to a SQL Server stored procedure. The code below is the main part that tries to pass 'True' to the stored procedure, but an error occurs when the line rst.Open.... is reached ? The error is as follows: The application is using arguments that are of the wrong type, are out of acceptable range, or are in conflict with one another.
I have tried putting 'True' directly in the rst.Open... line instead of assigning it to a boolean variable but the same error occurs.
The stored procedure works fine when run in SQL Server.
Guys I have a simple 'black box' proc deriving start and end dates below (the actual values will be derived from more complex code but here for simplicity are hard coded)
create proc upGetDates as declare @start datetime , @end datetime
select@start = '2001-01-01' , @end = '2007-12-31' go
I want to reuse this proc many times for different reports and using the date values in the calling sp
an example in pseudo code would be
create proc usedates as declare@rstart datetime , @rend datetime
exec upGetDates @rstart = @start , @rend = @end -- obtaining dates from ---called 'black box' proc select * from tablename where datecreated >= @rstart and datecreated < @rend go
Not sure how to 'trap' the dates from the called proc
I'm writing a simple voting script and have columns for each options. I need to update the data based on whichever option the user picks.I.e...If the user picks option 1 then execute UPDATE mytable SET option1 = option1 + 1If the user picks option 2 then execute UPDATE mytable SET option2 = option2 + 1 Etc., etc.What's the best way to do that without building an ad-hoc SQL statement? There could be many options so I dont want to have lots of redundant SQL statements.Can I just use a varible in a stored proc and do something like this? UPDATE mytable SET @optionUserpicked=@optionUserpicked + 1Thanks in advance
I have created a stored proc for a report, which works fine. I want to have the user enter a project ID to filter the report, so set the stored proc accordingly. However, I want the user to enter a 10 digit ID, which is the equivilent of two fields in the stored proc. My where statement is :
Where actv.ProjID + '-' + actv.Activity = @project
This works fine under the data tab, I can enter a full project and get the results I want. But I cannot preview the report without getting an error. I'm not sure how to add this to the report parameters, as it is two fields concatenated together. Any help would be appreciated!
I'm pretty new when it comes to Stored Procs, and for some reason, the CurAge isn't coming up with an actual numeric value. Does anyone see what I am doing wrong?
CREATE PROCEDURE sp_GetTargetProducts @hmid int, @wtid int AS DECLARE @CurAge INT if exists( SELECT LastName, FirstName, HMID, DATEDIFF (YY , BirthDate, GetDate()) As CurAge FROM Members WHERE hmid = @hmid ) BEGIN SELECT DISTINCT Product, ProductAdvance, AgeBottom, AgeTop, ProductName, ProductDesc, ProductPrice, ProductPicture FROM Products WHERE wtid = @wtid AND AgeBottom <= @CurAge AND AgeTop >= @CurAge GROUP BY Product, ProductAdvance, AgeBottom, AgeTop, ProductName, ProductDesc, ProductPrice, ProductPicture return(1) END else return(0) GO
What happened to being able to pass GETDATE() to a stored procedure? I can swear I've done this in the past, but now I get syntax errors in SQL2005. Is there still a way to call a stored proc passing the current datetime stamp? If so, how? This code: EXEC sp_StoredProc 'parm1', 'parm2', getdate() Gives Error: Incorrect Suntax near ')' I tried using getdate(), now(), and CURRENT_TIMESTAMP with the same result I know I can use code below but why all the extra code? And, what if I want to pass as a SQL command [strSQL = "EXEC sp_StoredProc 'parm1', 'par2', getdate()" -- SqlCommand(strSQL, CN)]? DECLARE @currDate DATETIME SET @currDate = GETDATE() EXEC sp_StoredProc 'parm1', 'parm2', @currDate Thanks!
I am currently in the process of building a stored procedure that needs the ability to be passed one, multiple or all fields selected from a list box to each of the parameters of the stored procedure. I am currently using code similar to this below to accomplish this for each parameter:
CREATE FUNCTION dbo.SplitOrderIDs ( @OrderList varchar(500) ) RETURNS @ParsedList table ( OrderID int ) AS BEGIN DECLARE @OrderID varchar(10), @Pos int
SET @OrderList = LTRIM(RTRIM(@OrderList))+ ',' SET @Pos = CHARINDEX(',', @OrderList, 1)
IF REPLACE(@OrderList, ',', '') <> '' BEGIN WHILE @Pos > 0 BEGIN SET @OrderID = LTRIM(RTRIM(LEFT(@OrderList, @Pos - 1))) IF @OrderID <> '' BEGIN INSERT INTO @ParsedList (OrderID) VALUES (CAST(@OrderID AS int)) --Use Appropriate conversion END SET @OrderList = RIGHT(@OrderList, LEN(@OrderList) - @Pos) SET @Pos = CHARINDEX(',', @OrderList, 1)
END END RETURN END GO
I have it working fine for the single or multiple selection, the trouble is that an 'All' selection needs to be in the list box as well, but I can't seem to get it working for this.
Any suggestions?
Thanks
My plan is to have the same ability as under the 'Optional' section of this page:
I'm attempting to pass a datetime variable to a stored proc (called via sql task). The variables are set in a previous task where they act as OUTPUT paramters from a stored proc. The variables are set correctly after that task executes. The data type for those parameters is set to DBTIMESTAMP.
When I try to exectue a similar task passing those variables as parameters, I get an error:
Error: 0xC002F210 at ax_settle, Execute SQL Task: Executing the query "exec ? = dbo.ax_settle_2 ?, ?,?,3,1" failed with the following error: "Invalid character value for cast specification". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
If I replace the 2nd and 3rd parameters with quoted strings, it is successful: exec ?= dbo.ax_settle ?, '3/29/06', '4/30/06',3,1
Hello, I have a number of multi-select parameters which I would like to send to a stored procedure within the dataset for use in the stored procedure's IN() statement which in turn is used to filter on or out particular rowsets.
I considered using a hidden string parameter set = " ' " + join(parameter.value, ',') + " ' " so that the hidden parameter would then contain a comma delimiated string of the values selected, which would then be sent on to the stored proc and used in the WHERE clause of one of the queries internal to the stored proc. But before I start dedicating time to do this I wanted to inquire if anyone here with far more expertise could think of a faster or less system heavy method of creating a single string of comma delimited parameter selections?
Hi, I'm trying to run a stored proc:ALTER PROCEDURE dbo.UpdateXmlWF(@varWO varchar(50))ASDECLARE @varCust VARCHAR(50)SELECT @varCust=(SELECT Customer FROM tblWorkOrdersWHERE WorkOrder=@varWO)When I remove the SELECT @varCust= I get the correct return. With itin, it just appears to run but nothing comes up in the output window.PLEASE tell me where I'm going wrong. I'm using MSDE, although I don'tthink that should matter?Thanks, Kathy
I've created a sproc in SQL2000 that returns a dataset from a temp table & the number of records it's returning as an output parameter, although I can't seem to retrieve the value it's returning in asp.net although I get the dataset ok.
This is my sproc create procedure return_data_and_value @return int output as set nocount on ... ... select * from #Table select @return = count(*) from #Table drop table #Table go
This is asp.net code
Dim nRecords as Int32 Dim cmd As SqlCommand = New SqlCommand("return_data_and_value", conn) cmd.CommandType = CommandType.StoredProcedure
Dim prm As SqlParameter = New SqlParameter("@return", SqlDbType.Int) prm.Direction = ParameterDirection.Output cmd.Parameters.Add(prm)
I am just trying to capture the return code from a stored proc as follows and if I get a 1 I want the SQL Task to follow a failure(red) constrainst workflow and send a SMTP mail task warning the customer. How do I achieve the Exec SQL Task portion of this, i get a strange error message [Execute SQL Task] Error: There is an invalid number of result bindings returned for the ResultSetType: "ResultSetType_SingleRow".
Using OLEDB connection, I utilize SQL: EXEC ? = dbo.CheckCatLog
EXEC SQL Task Editer settings: RESULTSET: Single Row PARAMETER MAPPING: User::giBatchID DIRECTION: OUTPUT DATATYPE: LONG PARAMETER NAME: 0
PS-Not sure if I need my variable giBatchID which is an INT32 but I thought it is a good idea to feed the output into here just in case there is no way that the EXEC SQL TASK can chose the failure constrainst workflow if I get a 1 returned or success constraint workflow if I get a 0 returned from stored proceedure
CREATE PROCEDURE CheckCatLog @OutSuccess INT AS
-- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON DECLARE @RowCountCAT INT DECLARE @RowCountLOG INT
---these totals should match SELECT @RowCountCAT = (SELECT Count(*) FROM mydb_Staging.dbo.S_CAT) SELECT @RowCountLOG = (SELECT Count(*) FROM mydb_Staging.dbo.S_LOG) --PRINT @RowCountCAT --PRINT @RowCountLOG BEGIN IF @RowCountCAT <> @RowCountLOG --PRINT 'Volume of jobs from the CAT file does not match volume of jobs from the LOG file' --RETURN 1 SET @OutSuccess = 1 END GO
hello at everybody well i have a problem. with in a package i defined a bollean variable with the name "x" and with a default value FALSE.
i created a configuaration file that contains the variable "x" as [user::x]. when i deploy the package to a server and i try to execute the package putting to the set values TRUE fror the x variable it doesnt work.
I am working with a large application and am trying to track down a bug. I believe an error that occurs in the stored procedure isbubbling back up to the application and is causing the application not to run. Don't ask why, but we do not have some of the sourcecode that was used to build the application, so I am not able to trace into the code. So basically I want to examine the stored procedure. If I run the stored procedure through Query Analyzer, I get the following error message: Msg 2758, Level 16, State 1, Procedure GetPortalSettings, Line 74RAISERROR could not locate entry for error 60002 in sysmessages. (1 row(s) affected) (1 row(s) affected) I don't know if the error message is sufficient enough to cause the application from not running? Does anyone know? If the RAISERROR occursmdiway through the stored procedure, does the stored procedure terminate execution? Also, Is there a way to trace into a stored procedure through Query Analyzer? -------------------------------------------As a side note, below is a small portion of my stored proc where the error is being raised: SELECT @PortalPermissionValue = isnull(max(PermissionValue),0)FROM Permission, PermissionType, #GroupsWHERE Permission.ResourceId = @PortalIdAND Permission.PartyId = #Groups.PartyIdAND Permission.PermissionTypeId = PermissionType.PermissionTypeId IF @PortalPermissionValue = 0BEGIN RAISERROR (60002, 16, 1) return -3END
possible to pass in a query as a parameter to a stored proc?
Number of constraints right now would make it a lot easier if I could pass in a query that selects all the ID's, tried but couldn't come up w/anything, just have a simple proc that does the deletes on 1 ID @ a time...since there are up to 100 that will need to be deleted, the qry as a param would be much more convenient. below is the proc...Thx for any help.
Code:
CREATE PROCEDURE [dbo].[s_DeletePeople]
@PeopleID int /* single id to be deleted, tried just passing * in a query that resembled a string and using it * but it didn't work either. */
AS
Deletefrom tProjectManager whereManager_ID in (@PeopleID)
Deletefrom tMerchandiser whereID in (@PeopleID)
Deletefrom tProjectCall wheremerchandiser_id in (@PeopleID)
Delete from tManager whereID in (@PeopleID)
Deletefrom tDistrictManager whereID in (@PeopleID)
I want to fire a trigger which calls a stored proc, passing the name of the table the trigger is defined on to the proc without having to hardcode.
Can it be done ?
trigger x on table y for update as declare @table_name select @table_name = get underlying table_name 'y' from somewhere exec stored proc (@table_name)
where do I find the name of the table the current trigger is defined on ?
I am having trouble executing a stored procedure on a remote server. On my local server, I have a linked server setup as follows: Server1.abcd.myserver.comSQLServer2005,1563
This works fine on my local server:
Select * From [Server1.abcd.myserver.comSQLServer2005,1563].DatabaseName.dbo.TableName
This does not work (Attempting to execute a remote stored proc named 'Data_Add':
When I attempt to run the above, I get the following error: Could not locate entry in sysdatabases for database 'Server1.abcd.myserver.comSQLServer2005,1563'. No entry found with that name. Make sure that the name is entered correctly.
Could anyone shed some light on what I need to do to get this to work?
Hi All,Quick question, I have always heard it best practice to check for exist, ifso, drop, then create the proc. I just wanted to know why that's a bestpractice. I am trying to put that theory in place at my work, but they areasking for a good reason to do this before actually implementing. All Icould think of was that so when you're creating a proc you won't get anerror if the procedure already exists, but doesn't it also have to do withCompilation and perhaps Execution. Does anyone have a good argument fordoing stored procs this way? All feedback is appreciated.TIA,~CK
I have an ASP that has been working fine for several months, but itsuddenly broke. I wonder if windows update has installed some securitypatch that is causing it.The problem is that I am calling a stored procedure via an ASP(classic, not .NET) , but nothing happens. The procedure doesn't work,and I don't get any error messages.I've tried dropping and re-creating the user and permissions, to noavail. If it was a permissions problem, there would be an errormessage. I trace the calls in Profiler, and it has no complaints. Thedatabase is getting the stored proc call.I finally got it to work again, but this is not a viable solution forour production environment:1. response.write the SQL call to the stored procedure from the ASPand copy the text to the clipboard.2. log in to QueryAnalyzer using the same user as used by the ASP.3. paste and run the SQL call to the stored proc in query analyzer.After I have done this, it not only works in Query Analyzer, but thenthe ASP works too. It continues to work, even after I reboot themachine. This is truly bizzare and has us stumped. My hunch is thatwindows update installed something that has created this issue, but Ihave not been able to track it down.
hi, i just want to check whether the given data exists in the database. i am using stored procedure. is there any way to know whether that value exists in database without the need to select anything?
I currently have a stored procedure that looks something like this SELECT * FROM tblQuestions WHERE Title LIKE ISNULL('%'+@Name+'%', Title)I have a form that supplies this value. This statement should make it so that if a NULL value is passed in, then it will return all the rows, if some text is specified, then it will not. On my SQLDataSource on the page where the parameter is supplied I have set ConvertEmptyStringsToNull to True, but when I say in my code,SqlDataSource1.SelectParameters.Add("@Name", TextBox1.Text);It won't give me back any of the rows, I know that the stored procedure works fine because I can get it to work by a basic query and other testing on it, so somewhere in my form, the NULL value isn't being passed, I belive that it is passing an empty string and I don't know why. Thank you in advance /jcarver
Hi all,How do you select and check a boolean value within a stored procedure? I don't know if this is correct or not:DECLARE @CheckStatus bitSELECT @CheckStatus = PREF_STATUS FROM tblPrefsWHERE [PREF_ID] = @PREF_IDIF (@CheckStatus IS FALSE) -- DO SOMETHINGIF (@CheckStatus IS TRUE) -- DO SOMETHING But I'm not sure if what I've used (IS FALSE/TRUE) is the correct way? "PREF_STATUS" is a bit column in my table.Thanks.
I am trying to test the concept of passing multi value parameters from one report using the Action Property of a textbox to open another report is a new Window with the Multi Value parameter values already passed. The test involves the following:
Report 1:
1. Multi Value Parameter @ReportParameter1 has three Values: Value1, Value2, Value3
2. Has a text box with the Action Property set to Go to URL with the following Expression: ="javascript:void(window.open('http://reportserver/Reports/Pages/Report.aspx?ItemPath=%2fReports%2fReport2&rs:Command=Render&ReportParameter1=" + JOIN(Parameters!ReportParameter1.Value,"&ReportParameter1=") + "'))"
Report 2:
1. Has Two Parameters @ReportParameter1 and @ReportParameter2
2. @ReportParameter1 has Available Values as follows: Value1, Value2, Value3
Does not have any default Values.
When I click on the textbox on Report1, it does navigate to Report2 but none of the Values are being set.
I have a stored procedure "uspX" that calls another stored procedure "uspY" and I need to retrieve the return value from uspY and use it within uspX. Does anyone know the syntax for this?
I have about 5 stored procedures that, among other things, execute exactly the same SELECT statement
Instead of copying the SELECT statement 5 times, I'd like each stored proc to call a single stored proc that executes the SELECT statement and returns the resultset to the calling stored proc
The SELECT statement in question retrieves a single row from a table containing 10 columns.
Is there a way for a stored proc to call another stored proc and gain access to the resultset of the called stored proc?
I know about stored proc return values and about output parameters, but I think I am looking for something different.
