Hi,
I want to give filtering criteria in my SSRS report.
I have drop down list control having list of Email's of clients.
So, how can i pass the value of the particular Email id in my SSRS report using Report Viewer control?
How can i pass user input as parameter in my report using visula studio 2005?
Thanx,
Ruja
Hello,
I am passing the partameters to MS Report Viewer control to view the report. It is working fine with normal parameters like 'abc', 'Jon' etc.
But fails with parameters having special characters like 'abc+', 'Version 1.1 Part 1', 'R1.8 RC' throws error "
The parameter is missing a value"
Could anyone please help on this.
Thanks,
Chandroday
Do I need the report server running in order view a SSRS report in a report viewer control? I've created my report in .net and it works great when I'm viewing it in visual studio, but can I run it my web app without the report server.
View 1 Replies View Related
Hi all,
I have been using the reportviewer control to display my ssrs reports. However, i'm facing issues in displaying Server reports in the control. The following error show up whenevr i click on View Report.
Execution 'aaxe3ke5k34l5355qbup0rvo' cannot be found
Please help if anyone has come across something similar
here is my error
System.Web.Services.Protocols.SoapException: System.Web.Services.Protocols.SoapException: Logon failed. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException: Logon failed. at Microsoft.ReportingServices.WebServer.RSCustomAuthentication.LogonUser(String userName, String password, String authority) at Microsoft.ReportingServices.WebServer.ReportingService.LogonUser(String userName, String password, String authority) --- End of inner exception stack trace --- at .................
Please help me
I am trying to use the Report Viewer Control in an ASPX page but getting the following error "For security reasons DTD is prohibited in this XML document. To enable DTD processing set the ProhibitDtd property on XmlReaderSettings to false and pass the settings into XmlReader.Create method". This is with September CTP of SQL Server 2005. I am not trying to set any DTD, the same report works if displayed using the WinForm viewer control...so I am not sure why this is happening. is there any samples available for using the Report Web viewer control in an aspx page?
Thanks
Krishna
Hello,
I'm using Report Viewer Control and everything works fine. But my problem is I have the same report shown two ways, handout/grid . Handout has less columns and grid has way more.
Now how can I accomplish this task ? I was thinking maybe have two subreports within the one main and hide/unhide accordingly based on user selection of handout or grid.
The problem is all my attempts are unsuccessful.
I will really appreciate if someone can help me on this.
Thanks a lot.
Harsimrat
Here's tricky one.
I have a fairly complex report that was given to me that was hard coded for single parameters. There is a dropdown for each market (created from a query in SSRS). The users have to run for each market each week.
Is there a way to use this report as a Sub-report inside a list of a master report and then use a mult-value parameter?
I want this multi-value parameter to build the values for the list and then run the "sub-report" for each value.
Essentially, I want to create a for each loop.
Any ideas?
Request is to have a Requirement number from the requirement form generate a report in Reporting Services with the requirement number as a filter.
I can set up the parameter - how does the value get there? Should I be asking this question in the Visual C# group?
Thanks!
Terry B
Hi,
Im using report viewer control in my VS2005 application.
Im exporting reports using the Export Functionality of report viewer control.
I need to gv specific name to the excel sheet (other then the default name).
Pl. help!!!
Regards,
Divya
I run my reports in local mode and do something like this :
Code Snippet
//Local Processing mode for Reports
reportViewer.ProcessingMode = ProcessingMode.Local;
// Set RDL file based on handout/grid selected
if (gridRadioButton.Checked)
{
reportViewer.LocalReport.ReportPath = "Grid.rdlc";
}
else
{
//Handout
reportViewer.LocalReport.ReportPath = "Handout.rdlc";
}
//Refresh the report in order to show it to the user.
reportViewer.RefreshReport();
The problem is that both handout and grid is diiferent, Say User Selects the grid once it always shows the grid report. Even second time you change to handout still it shows the same Grid format and I debugged it and it picks the new report path but doesn't help? The application needs to be rerun to fix it.
Can anyone explain what is causing this and how to get rid of it.
Thanks,
Harsimrat
Good Day:
I am running an ASP.NET 2.0 Reportviewer Control with VS2005 Created reports and SQL server 2005 on my website. Users are complaining that it takes a long time for the control to load and the reports to show on their browser. I tried it and it takes longer the first time the control loads. If the user keeps generating reports, the speed problem goes away but it comes back it seems after the Cache has expired? Any ideas on what to do so the ReportViewer Control loads faster? Can I pre-load it on users machines?
thanks,
Omar Soto
Hi,
I have asp,net application running on my machine.. it has report viewer control on it... But when i run the report it takes some time to generate. The report i create has around 6 pages and if i move to the next page in the report viewer i can an error that say ASP.net session is expired.. how can i fix it..
any help will be appreciated..
Regards,
Karen
Hello Everyone,
I have a report which runs in local mode and while designing the report I have placed a single image control inside the list box as I don't know before hand how many images are there :
What is the way to show all the images using the one image control inside the report viewer control. ? Can be 2 or 3 or 4.....
Thanks for all the help.
Harsimrat
Hi,
I would like to know how to call a report from a report viewer control in a web application. The reporting services is forms authenticated. I've done this authentication using the sample solution given by microsoft (adding custom security extension). Now am able to view the reports from Report manager and Report server URL. But i dont know how to authenticate the user from my web application and pass the credentials to the report server to view the report in report viewer control. Can somebody help in this? its bit urgent. Thanks in advance
Hi,
i hv made a rdl having 2 tables.My requirement is to display the tables on different sheets of excel, so i hv inserted "Page Break At End" in table1.
As a result im getting tables in different sheets but second table (in sheet2) is starting from 2nd row of the sheet i.e. 1st row is coming as hidden, and i want to remove this row as client feed's this excel file in some other application.
If anyone is aware of the solution pl. reply ASAP.
Thank u.
As most are aware by now, the Report Viewer controls for reporting services in 12.0 and prior rely on ActiveX to work. Â This causes compatibility issues for any non-IE browser, and as of IE11 and now Windows 10 Edge browser it's causing issues for even IE. Â Research suggests that SSRS 2014 switched out to Silverlight:
[URL]
However, Silverlight uses NPAPI which is another technology for which all browsers are ending support. Â As of this writing, Chrome has already ended support. Â Similarly/Coincidentally Java support is ending as well.
My question is, what are Microsoft's plan to restore functionality such as print/search for browsers where ActiveX/Silverlight cannot be used since this support is no longer strictly a 3rd party browser situation?
I have a .net 2.0 web form with a report viewer control (RS 2005) and have hard coded the report server and path. The report has two date time parameters that have a default value set up. When the user clicks the calendar icon to change the date range, the page refreshes without displaying the calendar... I don't remeber having this problem in the past. The parameters function fine in Report Manager. Any idea what could be causing this?
Hi,
I am using Microsoft.ReportViewer.WebForms ver 8.0 to display rdl reports in a web page. I'm using VS 2005 with service pack 1.
I set ReportServerCredentials using a custom class that implements IReportServerCredentials. It exposes NetworkCredentials using a valid admin user account. I am setting report parameters from code as:
ReportViewer1.ServerReport.SetParameters(parameters)
I find that when I run the page with reportserver credentials set, the parameters are not passed to the report and I get an error message, "Parameter, XXX is missing a value". I can see what parameters were sent by setting ShowParameterPrompts to True.
When I remove the credential settings,the parameter values do get set but the report throws the following error on execution:
Execution '2su5vg55juj253455rodai55' cannot be found
I have checked that my web project is using Kerberos authentication and not NTLM. Has anybody faced a problem like this? I would appreciate any help.
Thanks
Supriya
I am doing drillthrough from ReportA to ReportB via the Date field on ReportA. In Report Manager, all is well. However, when run through a custom app using asp.net and the report viewer control, the behavior was erratic. sometimes it would work. sometimes it would merely bring up the ReportA again and i would have to click Date again and then it would work.
a coworker recommended the Report Viewer fix http://support.microsoft.com/kb/933137. Since the redistributable was not present in Add/Remove programs on my test box, i installed the full version. I then started up the .net app in debug and ran ReportA and drilled through to ReportB several times and could not make it fail. I was happy.
Since the redistributable was not present on the production box, i installed the full install there as well. However, the erratic report viewer behavior continued.
I decided to try runnign ReportB directly instead of via the drill through from ReportA. ReportB had always run perfectly on its own. When i try to use the graphical date selector control, the results are different depending on the machine I use.
1. If i am using my test box, and i run ReportB directly via the app in debug mode, i get a runtime error indicating Microsoft JScript runtime error: Object required. It then points to Reserved.ReportViewerWebControl.axd at the GetObjectPosition(obj) function.
2. If i am using my test box and go out to the live production website, i get the same runtime error.
3. If i am using another machine and go out to the live production website, the data selector control merely seems to refresh the report. This is the same behavior i get when using the production server and going out to the live website.
The redistributable has been uninstalled from both the test box and the production box. This did not change the behavior described above.
All of the Microsoft.ReportViewer items in C:Windowsassembly indicate version 8.0.0.0.
Any help would be grand. Also, please let me know if I should cross post this in the .Net forums.
Thank you.
Does anyone know how to control the width of the parameter dropdownlist? If you select "Multi-value" for the parameter (non-sp1 version) the parameter list is in a dropdownlist that is manageable in size. If you do not use the multi-value parameter, it looks like the width of the dropdownlist is determined by the width of the longest text of the returned parameters.
Is there any way to control the width of the dropdown?
Thanks
Rob
Hi,
I am having hard time in sending parameters to the report server through reportviewer control from my application. Could anybody help me on this issue?. Is there any way to send the parameters and also what kind of configuration do i need on my report project so that it can accept parameters from my application.
Thanks,
Is there a way to change the background color of the parameter prompt area on the web report viewer control?
Thanks!
BobP
Is it possible to alter the format/layout of the parameter input boxes that the user enters values into.
reporting services automatically arranges them. Is it possible for the report writer to set the layout?
I know that when using report viewer in asp.net that the properties of the viewer are confiigurable.
I am experiencing a problem that has been posted a number of times but cannot find a solution. Passed linked report parameter value through URL:
Jump to URL:
Code Block="javascript:void(window.open('http://myservert/Reports/Pages/Report.aspx?ItemPath=/Sales/Enquiries/Order+Enquiry&rs:Command=Render&Cust="+Fields!Cust.Value+"'))"
When I click the link I am taken to the report but it is waiting for me to enter a parameter. I can see the parameter in the url address and it looks correct. I also tried Parameter!Cust.value (which has the same value as Fields!Cust.Value) but get the same result.
The target report has the correct name parameter: Cust. In any case, when I use "Jump to report" instead, it works correctly - although I don't see the parameter value in the url.
Any advice appreciated.
Thanks,
SQL Servant
I am generating a Report from Sql Data Source in Sql Server 2005 and viewing the Report in Report viewer control of Visual Studio 2005.
The data in the Data Source contains string with multiple spaces (for example €œ Test String €œ) but when they get rendered in Report viewer control, multiple spaces gets converted to single space €? Test String €œ.
I tried following solutions
1) Replacing spaces with €œ €?
2) Inserting <pre> tag before the string and </pre> tag after the string (Also tried <Pre> instead of <pre>)
But in all the cases result is same. The Report Viewer control is showing €œ €? instead of space and €œ<Pre>€? tag instead of preserving spaces.
Please provide me a solution so that spaces can be preserved in Report Viewer.
Hi all. Is it possible to pass parameter FROM Report to my windows application(C#) ? Report is made in Business Intelligence Project. I just want to retrieve the total row number to my windows appication. Is it possible? If yes, Can you provide codes for this? Thanks. Your help would be highly appreciated.
-Ron-
I am trying to create a drill-down report by passing the Customer ID number to the drill report. The 'parent' report is a tabular report, as is the 'child.' As long as I used the numeric Customer ID, the child report returned no rows from the passed parameter. However, when I use the Customer Name instead, the child report functions correctly.
Here is the parameter as passed using the Customer ID:
[Customer Hierarchy].[Customer ID].&[70011231]
Can anyone shed some light on why this wouldn't work?
Thanks,
nanc
I have a string report parameter called @name. In my script, i have and a.name like '%@name%' but it returns no rows. I tried removing the '% but still doesn't work. What is the correct way to script this?
View 3 Replies View RelatedHow would I hide certain parameter controls based on user sections in certain controls dynamically at runtime. I am using RS 2003 edition.
View 5 Replies View RelatedHi, I have found this question asked many times online, but the answers always consisted of getting a parameter from the user and to the report. That is NOT what everyone was asking. I would like to know how to pass a parameter I already have into my stored procedure. Using Visual Studio 2005, in the "Data" tab of a report calling something likeUnique_Login_IPsreturns correctly when that stored proc takes no params, but when I have one that takes the year, for example, I do not know how to pass this info in. Note: the following does not work in this context : EXEC Unique_Login_IPs ParameterValue nor does EXEC Some_proc_without_paramsVisual studio seems to want only the procedure name because it returns errors that say a procedure with the name "the entire line above like EXEC Unique_Login_IPs ParameterValue" does not exist.... Thanks in advance,Dustin L
View 1 Replies View RelatedI have defined a monthly substription for a series of reports. I would like to be able to pass a paremter used in generating the report to the file name define in the subscription.
I can do it if I used system names such as @datetime, but I want to be able to use a parameter unique to the report.
For example if the parameter for the report was CARS and I was quesrying Toyotas how can I get toyoats to show up in the file name?
Any suggestions?
Hi all;
Could any body tell me as to how I would be able to pass report grouping in drill through report.
Please review the diagram below to better understand my problem
Report 1 (Summary) Columns1 Column 2
Row-1:Grouped by attribute X Calculation based of dates Calculation based of dates
Row-2: Grouped by attribute Y Calculation based of dates Calculation based of dates
The Drill thru option should be present in all of the columns; so that, when any of the numbers in the column are clicked it should drill through to another report which should show all the records pertaining to all the values in X1
Report 2 (Details) Report 3 ((Details)
X1 Y1
X2 Y2
X3 -
X4 -
X5 -
- Yn
-
-
-
Xn
What I did so far was to pass the report parmeter in report 1 as "Fields! attribute X ,Value" and same for Y
The problem with is that only the first value of the group that satisfies condition gets passed on to the detail reports. Kindly let me know were I am going wrong and what should I be doing.
Awaiting your opinions
Thanks and Regards
GM