Passing Parameters To An Ssis Package?
May 31, 2007When someone executes my ssis package, I want the user to be prompted to fill in a few parameters. How do i do that?
View 4 Replies
ADVERTISEMENT
Passing Parameters To A DTS Package
Mar 10, 2005Hello All,
I am executing a DTS package from an asp page using the following code. I would like to also pass DTS Global variables along. i assume this is possible but can't seem to find an example.
Set oPkg = Server.CreateObject("DTS.Package")
oPkg.LoadFromSQLServer "HOFDBMCRM4","TraubGar","ripley",DTSSQLStgFlag_Default,"","","","DSC_CalculateBOS"
oPkg.Execute()
Thanks, Gary
Passing Execute DTS Package Result (success/failure) To Calling SSIS Package
Mar 6, 2008I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
Passing Value From A Child Package To The Parent Package That Calls It In Ssis
May 21, 2007hi,
I am interested in Passing value from a child Package variable to the Parent package that calls it in ssis.
I am able to call the Child package using the execute package task and use Configurations to pass values from the parent variable to the child, but I am not able to pass the value from the child to the parent.
I have a variable called datasetId in both the parent and child. it gets computed in the child and needs to be passed to the parent...
Any suggestions?
Thanks for any help in advance..
smathew
Passing Parameters Read From An Ini File To A Stored Procedure Within DTS Package
Sep 24, 2002Hi
I was wondering how I could pass on the following parameters from an ini file to a stored procedure within a DTS package. The parameters in the ini file look like:
[DatabaseCleaner]
! -- TableToBeCleaned_N=<table name>,<months to hold on db>,<months to hold on hd>
! -- <N> must be a successive number starting from 1 ...
TableToBeCleaned_1=Transactions,24,24
TableToBeCleaned_2=Payments,24,24
TableToBeCleaned_3=PresenceTickets,24,24
As I do not know how many tables that will be declared in the ini file I have to loop through until the last parameters and pass it over to the SP.
How can I do that? Any idea?
Thanks
mipo
Passing Parameters To SSIS Execute Process Task
Feb 20, 2008Hi
Can anyone help me in for the following.
i want to execute a exe file with two variable parameters
Executable : C: empMyExe.exe
Parameter1 : User::Category type is string (below example A)
Parameter2 : User::Amount type is string (below example 1)
in dos it looks like this
c: empMyExe A 1
This will executes fine.
Thanks,
Madhu
Dyanamically Passing Input Parameters To Stored Procedure By Using SSIS
May 14, 2008Hi,
I have 2 source tables emp_ass,aprvl_status these tables are not having common column to join. and 1 target table Time_Card, i have a stored procedure with 4 input parameters, emp_ass_id,status_id,start date,end date,i am inserting data into timecard based on emp_ass_id, my week start date is sunday and end date is saterday if emp start date is sunday i am just incremnting the start date by 7 days as end date is saterday and inserting that row, if employe statrt date is other than Sunday. i am just insering start date with to reach end date saterday, this work fine when i give the input parameters, now my reqirement is i need to automate this process as i need to get new emp_ass_id which is not in target table and insert his records based on his start date and end date,
ex:
if emp_ass_id is 1001, start date 1/1/2008 and end date is 2/1/2008 then i need to insert
Uniq_Id, emp_ass_id, start_date end_date status_id
1099
1001
1/1/2008 12:00:00 AM
1/5/2008 12:00:00 AM 1
1100
1001
1/6/2008 12:00:00 AM
1/12/2008 12:00:00 AM 1
1101
1001
1/13/2008 12:00:00 AM
1/19/2008 12:00:00 AM 1
1102
1001
1/20/2008 12:00:00 AM
1/26/2008 12:00:00 AM 1
1103
1001
1/27/2008 12:00:00 AM
2/2/2008 12:00:00 AM 1
the stored procedure will insert these records if i give the input parameters, now i need to automate this process by using SSIS. please help me,i need to get emp_ass_id,start_date,end_date dynamically from source table if emp_ass_id is not in target table.
Thanks in advance.
SQL 2012 :: SSIS Passing Parameters To Stored Procedure That Changes Based On The Data Being Passed?
Jun 23, 2015Using the following:
SQL Server: SQL Server 2012
Visual Studio 2012
I have created an SSIS package where I have added an Execute SQL Task to run an existing stored procedure in my SQL database.
General Tab:
Result Set: None
Connection Type: OLE DB
SourceType: Direct Input
IsQueryStoredProcedure: False (this is greyed out and cannot be changed)
Bypass Prepare: True
SQL Statement: EXEC FL_CUSTOM_sp_ml_location_load ?, ?;
Parameter Mapping:
Variable Name Direction Data Type Prmtr Name Prmtr Size
User: system_cd Input NVARCHAR 0 10
User: location_type_cd Input NVARCHAR 1 10
Variables:
location_type_cd - Data type - string; Value - Store (this is static)
system_cd - Data type - string - ??????
The system code changes based on the system field for each record in the load table
Sample Data:
SysStr # Str_Nm
3 7421Store1
3 7454Store2
1815061Store3
1815063Store4
1615064Store5
1615065Store6
1615066Store7
7725155Store8
STORED PROCEDURE: The stored procedure takes data from a load table and inserts it into another table:
Stored procedure variables:
ALTER PROCEDURE [dbo].[sp_ml_location_load]
(@system_cd nvarchar(10), @location_type_cd nvarchar(10))
AS
BEGIN .....................
This is an example of what I want to accomplish: I need to be able to group all system 3 records, then pass 3 as the parameter for system_cd, run the stored procedure for those records, then group all system 18 records, then pass 18 as the parameter for system_cd, run the stored procedure for those records and keep doing this for each different system in the table until all records are processed.
I am not sure how or if it can be done to pass the system parameter to the stored procedure based on the system # in the sys field of the data.
Passing Param - SSIS Package ??
Sep 21, 2007Hi,
I'm exporting some data from a table to fixed-width file using SSIS.
The query inside the package is:
SELECT col1, col3, col6 FROM Table1
WHERE code = 5 AND status = 'S'
The 'code' value will be passed from the front-end.
How can I make the query dynamically take the 'code' value and export to a file?
If a user selects 'code' as 7 , then the query should change to
SELECT col1, col3, col6 FROM Table1
WHERE code = 7 AND status = 'S'
and with this it has to export to a file.
Is this possible? If so, any suggestions on how to do it? !!!
Thanks,
Siva.
Scheduling A SSIS Package Using SQL Agent (passing Credentials)
Aug 30, 2007
Hi:
I created a fairly simple SSIS package to move data from a remote server which uses SQL Server Authentication to a local server that uses Windows Authentication. Everything works fine when executing the package within BI studio and if I execute the package by connecting to SSIS. If I schedule it as a SQL Server Agent Job, however, the non-integrated security fails unless I manually edit the connection to include the password. Obviously this is insecure because it is in plain text. What can I do?
Thanks.
SSIS Parent/Child Package Variable Passing
Feb 7, 2006Hi
I have having trouble getting my hands around how to retrieve variables from a parent package. I read about the Environment variables and Configuration File at the parent package level and the Parent Package variable at the child level.
Here are my questions:
1. Can you only store/retrieve 1 variable in a config file at a time?
2. Does the child package have to define the variables and if so, do they have to be the same names as the parent package?
This seems so more more complex then the DTS2000 way of passing variables to and from packages.
Any help would be appreciated.
Thanks in advance,
Gordon Radley
Passing Values For Variables To An SSIS Package From C#/ ASP.NET Page.
May 30, 2007I've got an SSIS package that works fine. It does extracts from a foreign ODBC source and moves it to SQL Server. It has 3 variables, a customer ID, a fromDate and a toDate. Those variables are used to complete a SQL statement expression. So far so good.
I now want to provide a web interface in a web page that will enable the user to provide values for those variables. How can I execute my package passing the user's input?
Thanks for any advice.
Lou
Passing SSIS Package Variable To Stored Procedure As Parameter
Feb 25, 2008
I've created a varible timeStamp that I want to feed into a stored procedure but I'm not having any luck. I'm sure its a simple SSIS 101 problem that I can't see or I may be using the wrong syntax
in Execute SQL Task Editor I have
conn type -- ole db
connection -- some server
sql source type -- direct input
sql statement -- exec testStoredProc @timeStamp = ?
if I put a value direclty into the statement it works just fine: exec testStoredProc '02-25-2008'
This is the syntax I found to execute the procedure, I don't udnerstand few things about it.
1. why when I try to run it it changes it to exec testStoredProc @timeStamp = ? with error: EXEC construct or statement is not supported , followed by erro: no value given for one or more requreid parameters.
2. I tired using SQL commands exec testStoredProc @timeStamp and exec testStoredProc timeStamp but nothing happens. Just an error saying unable to convert varchar to datetime
3. Also from SRS I usually have to point the timeStamp to @timeStamp and I dont know how to do that here I thought it was part of the parameter mapping but I can't figure out what the parameter name and parameter size should be; size defaults to -1.
Thank you, please help.
Integration Services :: Passing Connection String Dynamically To SSIS Package
Jul 12, 2012I have create packages which loads the data from flat file to sql server table, now I want to make my destination table connection dynamic what is format of connection string. I also need to pass user name and password for sql server dynamically in this case, what is the format for the connection string.
Also  in package i used ADO.net  as source for  *.mdb files how i can set the commection to .mdb files dynamically which is used as source in my package.
SQL 2012 :: Passing Record Counts From Execute Task In SSIS To Package Variables
Mar 4, 2014I've got a package in SSIS 2012 that has an Execute SQL task in the control flow level.
The SQL in question does an Upsert via the SQL merge statement. What I want to do, is return the count of records inserted and records updated (No deletes going on here to worry about). I'm using the output option to output the changed recs to a table variable.
I've tried returning the values as:
Select Count(*) as UpdateCount from @mergeOutput where Action = 'Update'
and
Select Count(*) as InsertCount from @mergeOutput where Action = 'Insert'
I've tried setting the resultset to both Single rowset and Full rowset, but i'm not seeing anything returned to the package variables I've set for them (intInsertcount and intUpdatecount).
Pass Parameters Into SSIS Package From A Web Application
Nov 13, 2007Hi all,
I wish to pass parameter from a dropdownlist in my web application to the SSIS package so as to export the user specified table.
Is using package configuration the right way to do this?
Any advice is appreciated!
Command Line Parameters Are Invalid Is The Output For A SQL Job To Run SSIS Package
May 25, 2006Hello,
I created a SSIS package that has a flat file manager whose connection string is a package variable, the reason is that there is a foreachfile container loop to loop thru CSV format files in a directory and load them to a sql table.
The package execution is working in the designer studio as well as in the management studio-- a copy was saved to a sql 2005 server where a sql job is deployed to run the package. However when I ran the job, it claims successful but doesn€™t do anything in reality. If I checked the box failing the package upon validation warming, the job will fail with the error: the command line parameters are invalid. The command line looks like below:
/SQL "Package" /SERVER FTLQSQL03 /WARNASERROR /MAXCONCURRENT " -1 " /CHECKPOINTING OFF
One thing that I think maybe wrong is on the data source tab of the job step GUI, the flat file manager€™s connection string is blank, compared to other connection managers having related values.
Does anyone know how to make the job working?
Thanks in advance
I
Integration Services :: SSIS 2012 And Required Package Parameters
Nov 4, 2015I'm after running into something in SSIS 2012 that I fail to grasp.
I have a package that provides a service to other packages. In order to provide that service it needs 4 parameters provided by the caller. So naturally I'm thinking I make those 4 parameters 'required'.
The caller uses Execute package task and provides the 4 parameters on the parameter mapping tab.
Yet the packages fails with the error message that one or more required parameters weren't provided.
Job To Execute A SSIS Package Fails - The Command Line Parameters Are Invalid
Jul 28, 2005I have created a job to execute a SSIS package located in the SSIS Package Store. When starting the job I receive an error. The history log reports:
View 12 Replies View RelatedIntegration Services :: Using Parameters With OleDB Command Provider For Oracle Into SSIS Package?
Dec 8, 2011I need to delete some records in a Oracle RDBMS based at a SQL Server's query. I'm using the follow structure SSIS's package:
View 4 Replies View RelatedPassing A Variable Value (Package Scope) To A DTS Package Embedded Into Execute DTS 2000 Task
Jul 19, 2007Hi friends,
I have a for each loop that populates from a set of flat files into a Sql Server table, I run the Flat file Import via a dts package embedded into Execute DTS 2000 Task. I want to pass the Sourcefile Name that is fetched by the For Each Loop to assign it Global Variable in DTS. how this can be made ?
Thanks
Subhash Subramanyam
Passing The Xml Configuration File To The Package As An Input Parameter While Executing The Package
Feb 2, 2007Hi,
I am planning to develop a single package that will download files from ftp server, move the files to internal file server and upload it in the database. But I want to run this package for multiple ftp file providers. For each provider the ftp server might be different and the transformation to upload the files into a database table might be different.
So can I create a single package and then multiple configuration files (xml), which will contain the details fo the ftp file providers and then pass the xml file as a parameter while executing the package. The reason being that the timings of fetching the files is different for each ftp file provider and hence cannot be combined into one.
Is this possible?
Thanks for your help.
$wapnil
Parameters Passing
Mar 14, 2008Hi,
how to pass paremeters in sqldataadapter? here iam checking authentication using sqlcommand and datareader
like that if iam checking authentication using dataset and sqldatareader how to use parameters?
SqlConnection cn = new SqlConnection("user id=sa;password=abc;database=xyz;data source=server");
cn.Open();
// string str = "select username from security where username='" + TextBox1.Text + "'and password='" + TextBox2.Text + "'";
string str = "select username from security where username=@username and password=@password";
SqlCommand cmd = new SqlCommand(str, cn);
cmd.Parameters.AddWithValue("@username", TextBox1.Text);
cmd.Parameters.AddWithValue("@password", TextBox2.Text);
SqlDataReader dr = cmd.ExecuteReader();
if (dr.HasRows)
{
Session["username"] = TextBox1.Text;
FormsAuthentication.RedirectFromLoginPage(TextBox1.Text, false);
}
else
{
Label1.Visible = true;
Label1.Text = "Invalid Username/Password";
}
-------------------------------------------------------------------------------------
like that if iam checking authentication using dataset and sqldatareader how to use parameters?SqlConnection cn = new SqlConnection("user id=sa;password=abc;database=xyz; data source=server");
cn.Open();ds = new DataSet();
string str = "select username from security where username=@username, password=@password";da = new SqlDataAdapter(str, cn); //how to pass parameters for that
da.Fill(ds, "security");
Response.Redirect("dafault2.aspx");
Passing Parameters To DTS In C#
Apr 17, 2004I have a dts package file. I am able to execute the file thro C#. I want to pass userid, password, datasource through program. How to do this?
DTS.PackClass package = new DTS.PackClass();
string filename = @"c:abc.dts";
string password = null;
string packageID = null;
string versionID = null;
string name = "DTSPack";
object pVarPersistStfOfHost = null;
package.LoadFromStorageFile(filename, password, packageID,
versionID, name, ref pVarPersistStfOfHost);
package.Execute();
package.UnInitialize();
package = null;
Thanks
Jtamil
HELP! Passing Parameters
May 30, 2006Still need help passing a criteria parameter query from a SQL Function (i.e. @StartDate) to a report header in Access Data Project where header = 'Transactions As Of [StartDate].
If anyone knows anywhere I can get help on this, I would really appreciate it. Thanks.
Passing Parameters In TableAdapter
Jul 28, 2006A little new to ASP.NET pages, and I'm trying to pass some parameters to a SQL 2000 Server using a TableAdapter, code is as follows:
------
TestTableAdapters.test_ModemsTableAdapter modemsAdapter = new TestTableAdapters.test_ModemsTableAdapter();
// Add a new modem
modemsAdapter.InsertModem(frmRDate, frmModem_ID, frmProvisioning, strDecESN );
--------
And the error I get when loading the ASP.NET page is as follows:
Compiler Error Message: CS1502: The best overloaded method match for 'TestTableAdapters.test_ModemsTableAdapter.InsertModem(System.DateTime?, string, string, string)' has some invalid arguments
---------------
Now I realized the four strings that I am trying to pass to the server refer to ID's on Textboxes on the web page. Not sure if that might be the problem for databinding... ? Or is it my statement for the adapter?
-Ed
Passing Parameters Using IN Statement
Dec 7, 2006The SQL for a dataset in ASP.NET 2.0 is as follows....
SELECT DISTINCT StudentData.StudentDataKeyFROM Student2Roster INNER JOIN StudentData ON Student2Roster.StudentDataRecID = StudentData.StudentDataRecIDWHERE (Student2Roster.ClassRosterRecID IN (@ClassRosterRecIDs)
ClassRosterRecIDs are giuds
At design time i use 'b2cf594d-908b-4c0c-a67f-6364899a4d42', '2e0b3472-d3f0-4a54-94af-bfc0a99525d9' as the parameter and it works in the designer but not at runtime.
At runtime I get the error Conversion failed when converting from a character string to uniqueidentifier.
If I leave the quotes off and only use 1 value like b2cf594d-908b-4c0c-a67f-6364899a4d42 it works.How can I use multiple guids as an IN parameter like 'b2cf594d-908b-4c0c-a67f-6364899a4d42', '2e0b3472-d3f0-4a54-94af-bfc0a99525d9'?
Thanks
Passing Parameters To LIKE Function
Jul 22, 2007Hi,I want to pass parameter in to LIKE functionIs there anyway to do thatThanks,Janaka
View 6 Replies View RelatedPassing Dtae Parameters
Apr 10, 2008Hi
I'm trying to add 2 date parameters to the where caluse but not sure how to structure it:
Can anybody help?
Public Function GetCategoryPerformance(ByVal PriorityType As String) As DataSet
'*******************************************************
'This web service will return a specific row for a table
'*******************************************************Dim cn As New SqlConnection("data source=CADTRAINING;persist security info=True;initial catalog=pathwaysreporting;user id=cad;password=cad;")
Dim da As SqlDataAdapter = New SqlDataAdapter("SELECT * from sp_category_performance where where priority = '" & PriorityType & "'", cn)Dim ds As DataSet = New DataSet
Try
da.Fill(ds, "CategoryPerformance")Catch ex As Exception
Throw New Exception(ex.Message)
End TryReturn ds
End Function
End Class
Passing Parameters In ISQL
Aug 30, 2001Hi,
I would like to pass parameters from isql command line to an input query file. I am working on SQL Server 7.0. How can I accomplish this?
My eg. is like this:
> isql.exe (all the server options etc.,) /iInputfile /oOutput file
I need the output depend on the query given in the input file with the query depending on the parameter I supply on the command line.Thanks for your help in advance.
thanks,
Sravan.
Passing Parameters (Urgent)
Jul 21, 2000I'm trying to execute this statement but due to some missing paremters its creating table in that fashion
Table created = '+@string+'_'+@string1+'
but I want table to be create as what parameters passed, can you have a look pls...
exec sp_test 'master','table'
Starts here-----------
if exists (select * from sysobjects where id
= object_id(N'[dbo].['+@string+'_'+@string1+'])
and OBJECTPROPERTY(id, N'IsUserTable') = 1)
Drop table [dbo].['+@tblName+'_'+@table1+']
CREATE TABLE [dbo].['+@string+'_'+@string1+']
(
[HESClrId] [nvarchar] (20) NULL ,
[HESClrName] [nvarchar] (60) NULL ,
[HESClrSeq] [smallint] NULL
)
ON [PRIMARY]
Passing Parameters To A View
Sep 18, 2002Can I pass a parameter to a view? Can something like this even be done?
CREATE view co_interlinks1
AS
SELECT [TDirectorships].[IDDir], [TDirectors].[DirLName] + ', ' + [TDirectors].[DirFName] AS DirectorName, [TDirectorships].[Ticker], [TCompanies].[CompanyName]
FROM TDirectorships
INNER JOIN TCompanies
ON [TCompanies].[Ticker]=[TDirectorships].[Ticker]
INNER JOIN TDirectors
ON [TDirectorships].[IDDir]=[TDirectors].[IDDir]
WHERE [TDirectorships].[IDDir] in (SELECT [TDirectorships].[IDDir]
FROM TDirectorships
WHERE Ticker=@Ticker)--This line requires a variable value corresponding to Ticker for the chosen company
and [TDirectorships].[Ticker] <> =@Ticker --This line requires a variable value corresponding to Ticker for the chosen company
Getting Chart By Passing Parameters
Oct 24, 2005Hi
I created a report based on category,time and stores as report parameters.The datasets are created by using mdx queries and the provider I selected is olap services.I would like to add a bar chart in the layout and the resultant chart should be based on the selected parameters.I am not able to get this.First of all is it possible? If so, what should I do in the chart properties?
Regards
Ranjit