Bonjour,
J'execute un script en sql 7 qui lance isql qui crée un fichier texte en sortie. j'ai un souci, ce fichier de resultat a remplacer les lettres accentuées é è ...
par des virgules ,
Quelle est la solution ? Merci d'avance ...
Hi,I'm using isql to query data and output the same to a flat file.The isql has the following command options ' -h-1 -w500 -n -b -s"" '.In the SQL_CODE, the first two lines before the select statement areuse dbnameset nocount ongoWhen I run this, an additional blank line is put into the output file.Actually, there are two lines after the last result set in the outputfile. This file is being fed into another system and the blank line iscausing validation issues.How can I supress this blank line?This script is run from windows and the isql is called from a batscript.Batch script ...================================================== ========.....isql -Uuserid -Ppassword -Sserver -i"%SQL_CODE%" -h-1 -w500 -n -b -s""[color=blue][color=green]>>"%OUT_FILE%"[/color][/color]IF ERRORLEVEL 0 SET RC=0IF ERRORLEVEL 1 exit 4================================================== ========SQL code ...================================================== ========use punclaimset NOCOUNT ONGOselect * from XYZ;GO================================================== ========Your help is greatly appreciated.Yash
View 3 Replies View RelatedWhen registering a new SQL Server I get the following message:
"Warning - The client and server codepages do not match.."
However when I run sp_helpsort on the client and server both have the same code page (cp850).
Does anyone have any idea as to why I'm getting this message.
Any suggestions welcome.
Thanks,
Karl
How do I find out what codepage a server has been set up with?
I've 2 sql boxes. Registering them in Enterprise Mgr. gives a message for the second one saying codepage is different. I don't want to have to reinstall both.
I thought I'd be able to find this in a FAQ or BOL but haven't found it so far.
Thanks.
Simon.
LocaleID is 'English (United States)'
However, after I scripted query statement like 'select cast(col as varchar(20)) as col1...', the codepage changed to my local codepage, the col's datatype is nvarchar(20)
Any idea about this? Thanks
I'm in the process of upgrading some databases from SQL 7.0 to SQL 2000. The SQL7.0 server was installed using codepage 850 (multilingual), Sortorder CI AS.
I now copied the datafiles to the new SQL2K server and attached them. The database properties now show codepage SQL_Latin1_CP850_CI_AS which seem right to me. Unfortunately most special characters show wrongly in our application. In EM or QA everything looks fine. I tried to change settings in the client network utility but without success. Any ideas what is wrong? :confused:
Thanks a lot
M
Well , I have a SQL 7 work with code page 840 and contain about 3 MG of arabic content (extended ASCII Code) , but we need to chnage the SQL 7 to work with code page 1252 with the data ib it , cause we face a problem with the code page 840 so we want it to be 1252 , so if some one suggest anything to solve this problem , I will be happy to hear from them ....
View 1 Replies View RelatedHello all,
I'm having a problem creating a very simple transformation.
source:
sql 2000
table: FE_Login_Attempts
field FLA_UserName defined as varchar(50)
collation: SQL_Latin1_General_CP1_CI_AS
destination:
sql 2005
table: Inc_Fact_CasAp_Transactions
field FLA_UserName defined as varchar(50)
collation: SQL_Latin1_General_CP1_CI_AS
for some reason, I'm having a problem transfering certain records, even though the collation on the dbs are the same, and I'm using the 1252 codepage for the FLA_UserName field.
the complete error messege i'm getting is:
Error: 0xC020901C at Insert CasAp_Transactions into Inc_Fact_CasAp_Transactions, TTF-SQL;db_CasAp;FE_Login_Attempts [1]: There was an error with output column "FLA_UserName" (1157) on output "OLE DB Source Output" (11). The column status returned was: "Text was truncated or one or more characters had no match in the target code page.".
Error: 0xC020902A at Insert CasAp_Transactions into Inc_Fact_CasAp_Transactions, TTF-SQL;db_CasAp;FE_Login_Attempts [1]: The "output column "FLA_UserName" (1157)" failed because truncation occurred, and the truncation row disposition on "output column "FLA_UserName" (1157)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
Error: 0xC0047038 at Insert CasAp_Transactions into Inc_Fact_CasAp_Transactions, DTS.Pipeline: The PrimeOutput method on component "TTF-SQL;db_CasAp;FE_Login_Attempts" (1) returned error code 0xC020902A. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at Insert CasAp_Transactions into Inc_Fact_CasAp_Transactions, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
Error: 0xC0047039 at Insert CasAp_Transactions into Inc_Fact_CasAp_Transactions, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at Insert CasAp_Transactions into Inc_Fact_CasAp_Transactions, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
Any help will be greatly appreciated.
Liran
I have deveoped a replacement for some an old bcp based applications in the .Net Framework that uses the SqlBulkCopy class.
I have run into some difficulties with code page translation:
The original BCP client runs with OEM Codepage 437 , thus the data "ëÄÆòÖ" gets loaded as "d-¦=+". DB is SQL_Latin1_General_CP1_CI_AS, column is varchar.
I have been unable to perform any code page Encoding in .Net that yields the same result.
I want to emulate this behaviour in my database loader but as yet have been able to find a way....
Any Ideas???
Thanks,
Niall
I have a JDBC type 4 driver, connecting to a Japanese SQL Server 2000. The connection gives this SQL exception:
SQLException: Codepage 932 is not supported by the Java environment.
SQL State: null
SQL Code: 0
This same software has been in use and working just fine for over 2 years with other servers. Does anyone know the solution to this problem?
Thanks!
pds2
I know there is a sortid in .iss file, which could be used to change installation params, but I want to know how to change it after installation. Thanx.
View 1 Replies View Related
I have generated the package ! but it gives me an error at:
outputColumn.SetDataTypeProperties(dataType, length, precision, scale, targetColumn.CodePage);
private void ConfigureDataConversionComponent(Microsoft.SqlServer.Dts.Pipeline.Wrapper.IDTSComponentMetaData90 dataconversionComponent)
{
PipeLineWrapper.CManagedComponentWrapper managedOleInstance = managedOleInstanceDataConversionComponent;
// Get the derived's default input and virtual input.
PipeLineWrapper.IDTSInput90 input = dataconversionComponent.InputCollection[0];
PipeLineWrapper.IDTSVirtualInput90 vInput = input.GetVirtualInput();
// Iterate through the virtual input column collection.
foreach (PipeLineWrapper.IDTSVirtualInputColumn90 vColumn in vInput.VirtualInputColumnCollection)
{
managedOleInstance.SetUsageType(
input.ID, vInput, vColumn.LineageID, PipeLineWrapper.DTSUsageType.UT_READONLY);
}
// putting the truncation row disposition
dataconversionComponent.OutputCollection[0].TruncationRowDisposition =
PipeLineWrapper.DTSRowDisposition.RD_NotUsed;
// putting the error row disposition
dataconversionComponent.OutputCollection[0].ErrorRowDisposition =
PipeLineWrapper.DTSRowDisposition.RD_NotUsed;
// get the output column collection reference
PipeLineWrapper.IDTSOutput90 output = dataconversionComponent.OutputCollection[0];
foreach (PipeLineWrapper.IDTSInputColumn90 inColumn in
dataconversionComponent.InputCollection[0].InputColumnCollection)
{ // create the map
// get the target column from the mapping informations
PipeLineWrapper.IDTSOutputColumn90 outputColumn =
dataconversionComponent.OutputCollection[0].OutputColumnCollection.New();
outputColumn.Name = inColumn.Name;
Column targetColumn = GetTargetColumnInfo(inColumn.Name);
// find out the length of the column
int length = targetColumn.Length;
// get the precision of the target column
int precision = targetColumn.Precision;
// get the scale of the target column
int scale = targetColumn.Scale;
// get the SSSIS complaint datatype from the given mappings
Microsoft.SqlServer.Dts.Runtime.Wrapper.DataType dataType = targetColumn.DataType;
// setting the data properties
outputColumn.SetDataTypeProperties(dataType, length, precision, scale, targetColumn.CodePage);
// putting the external metadata column id to zero
outputColumn.ExternalMetadataColumnID = 0;
outputColumn.ErrorRowDisposition = PipeLineWrapper.DTSRowDisposition.RD_RedirectRow;
outputColumn.TruncationRowDisposition = PipeLineWrapper.DTSRowDisposition.RD_RedirectRow;
PipeLineWrapper.IDTSCustomProperty90 property = outputColumn.CustomPropertyCollection.New();
property.Name = "SourceInputColumnLineageID";
property.Value = GetSourceColumnLineageID(targetColumn.Name);
property = outputColumn.CustomPropertyCollection.New();
property.Name = "FastParse";
property.Value = false;
// Now we are preserving the Lineage id into a list.
// you know, when later we will configure the dataflowcomponent of SQL destination
// then, we will find all the inputs (the input came from flat file and the inputs
// came from the derived columns output). And we need to distinguish among them.
// we will only consider those inputs into the data destination component, where the
// inputs are came from the out put of derived column component. which is actually here.
derivedLineageIdentifiers[outputColumn.LineageID] = outputColumn.Name;
}
}
Hello,
how can i do to launch a .bat file that execute my procedures in whitch i populate a table that after must be send whith bcp command to a file??
Can you give me an example for that?What about ISQL??
Thanks
Massimo Nardi
Does anyone use ISQL to run maintenance? I am trying to write a batch file that will log on to my server and dump a specifice tran log when triggered by a perfmon warning.
I can successfully log on to the server however the dump command does not seem to run? IS it possible to run a predefined task??
ANy assistance would be greatly appreciated,
Thanks
David
When I am running an SQL query on a SQL server DB from ISQL the results are returning a space in front of every row, plus it is returning the number of rows effected at the bottom. When I run the query without ISQL the results come back without the space in front of every row, but it does come back with the number of rows effected. I need the spaces reomed and the number of rows removed. Here is an example of the ISQL.
ISQL.EXE /U????? /P?????? /n /d????? /h-1 /w 218 /S????? /i????? /o?????
Are ther any arguments to help remove the preceding space and the trailing footer?
Here is a copy of the SQL
select CONVERT(char(49),i.item_number),CONVERT(char(17),s um(s.actual_qty)),CONVERT(char(19),"WMS"),
CONVERT(char(2),DATEPART(month,GETDATE())) + '/' + CONVERT(char(2),DATEPART(day,GETDATE())) + '/' + CONVERT(char(4),DATEPART(year,GETDATE())) + CONVERT(char(109),''),
CONVERT(char(8),"01:00:00") from t_stored_item s, t_item_master i, t_location l
where i.c5 = 'FVM' and
i.item_number = s.item_number and
l.location_id = s.location_id and
l.location_id like 'V-%'
group by i.item_number
order by i.item_number
Thanks!
Hello all, I'm new to the board...
I'm trying to run a script in isql with a file that contains create database statements and I'm completely lost. If someone could help me and point me in the right direction, please!
Thank you
Hi,
I'm running isql from a dos batch file and the isql command is below:
%SQLPath%isql -U%DBUser% -P%DBPswd% -S%SQLServer% -d%Gatewaydb% -iBatchScriptsSQL_Get_Create_Batch.sql -oZ:mbox
ecsincreate_1.bat -w100 -s; -h
I want the rows from the SELECT statement in my ".sql" file to appear in the output file but what ends up being written to the file is this:
1> 2> 3> 4> 5> 6> 7> 8> 9> 10> 11> 12> 13> 14> 15> 16> 17> 18> 19> 20> 21> (14 rows affected)
Not sure what I'm doing wrong.
Thanks,
J
1>
Hi,
When I execute a script by using isql, it displays the number of statement executed. can anybody tell me how to turn this off (no display)?
Thanks,
Mark
Hi
I am running the Stored procedure from using ISQL like this and the stored procedure name is in the input file (c:empinp.txt)
c:>ISQL /S DB1 /U sa /P pass /d test_db /i c:empinp.txt
I want to write a Comment(say 'DONE' OR 'COMPLETED') into a OUTPUT FILE? after executing the stored procedure.
Is there a way to do it?
Thanks
VENU
I am looking for a shareware product I can use in place of ISQL. I am working with databases on a web site, and I want to be able to give different clients access to their data, without forcing them to go out and buy SQL Server.
Thanks,
Doug
Hi,
All the wanted to know whether the ISQL utility is optional during the sqlserver setup??? Is it possible to install sql server without installing ISQL utility??
Thanks in advance,
Asha
Is osql/isql supported in SQL 2005? How about in 2008? Thanks
View 2 Replies View RelatedI'm running sql 6.5. trying to load lots of data. Rec msg that memory was low so I increased memory obvisouly too high. Now sql will not start. found all the documentation to start sql in single user mode however when trying to start isql to change to memory setting, isql would not start. The server is using named pipes. Message I receive is sql server is unavailable or does not exist.
You help would be greatly appreciated as this is a production environment and we are down.
thanks!!
darlene
Hi,
I would like to pass parameters from isql command line to an input query file. I am working on SQL Server 7.0. How can I accomplish this?
My eg. is like this:
> isql.exe (all the server options etc.,) /iInputfile /oOutput file
I need the output depend on the query given in the input file with the query depending on the parameter I supply on the command line.Thanks for your help in advance.
thanks,
Sravan.
Hi,
I have an input file which contains a simple select query. I want to output the results of the query to an output file. I use the following query:
DECLARE @sTemp1 Varchar(100)
SELECT @sTemp1 = "isql -d TestDB /U sa /P SAPassword -n /i C:QRYIn.txt > C:QRYOut.txt"
EXEC master..xp_cmdshell @sTemp1
The problem is that this query looks for the C: drive on the SERVER not on my local machine. C:QRYIn.txt exists on my machine so this does not work. However if I create a C:QRY folder on the SERVER the whole thing works.
Basically I want this query to go to execute the In.txt query from my local machine as opposed to the SERVER.
Gurus,
For some reason the INPUT REDIRECTION of FTP commands from a file does not work when executed from a ISQL session.
"ftp -i -n host_name <serverstare_dirFTP-commands.dat >serverstare_dirFTP-errors.dat " would not work. It gives me an error message - "The handle could not be opened during redirection of handle 0 "
How ever it works from COMMAND prompt and BAT files.
I changed it use "-s:" option instead of INPUT REDIRECTION and it works just fine every where... The command I used is
"ftp -i -n -s:serverstare_dirFTP-commands.dat host_name >serverstare_dirFTP-errors.dat "
I still could not figure out why INPUT REDIRECTION would not work from ISQL only.
any ideas !!!!!!!!
Thanks,
- HemantH
I am writing a trigger that I want to call a BAT file when there is an insert or update to a paricular table, but don't know the code to that will execute my BAT file.
To reitrate, when a row is inserted, I want to automatically start a particular EXE that our developers created to process rows written into this table.
My BAT that currently runs OK from the Command line is : CBBOP.BAT
-----------------
@echo
"d:program filescabs2000CBBOP.exe" /cabsit /password 2,2,time
-----------------
But what I need to know is the SQL that will run my CBBOP.BAT, and I will code it into my trigger.
Cheers
Brett
SQL 6.5
I am doing a ISQL join on 4 tables that creates a few million record output. This causes some memory grief on my laptop. How do I have my query output to my c: drive??
Thnaks in advance.
Ray
I have copied a script from the web that allows me to run scripts from a file over multiple databases(have attached file). Now everything works fine on my local SQL server but when I try to run it on my web server I get this msg
''isql' is not recognized as an internal or external command, operable program or batch file.'
I have tried to use the full path to the isql.exe file but still get the msg
Thats about as much info I can provide, my understanding of this is very slight
ISQL.EXE hangs during installation. In task manager, when I end task on ISQL.EXE the installation continues, but msdb comes up suspect. Can someone please help me.
View 2 Replies View RelatedHi all,
Can anyone help me?? I'm just a newb :D
Please consider the following:
I need to be able to query a db on server A, in a batch file, return the result (DateTime value) into a variable, and then use that date as a parameter in a query that I will query on server b.
I have the following code:
isql -E -d firstDB -S ServerA -Q "select max(load_date) from mydates"
How would I pipe the results of the above query into a variable???
I cannot create a linked server between the two servers. (Permissions)
Thanks in advance!
Hi,I have created a database as pubs.qa and wrote a command utility toquery a table.isql -S server -E -d pubs.qa -i qry.sql -b -ncontents of qry.sqlselect * from usersgowhen i run this command, error messageMsg 911, Level 16, State 1, Server XXXXXXX, Line 1Could not locate entry in sysdatabases for database 'pubs'. No entryfound with that name. Make sure that the name is entered correctly.However, I am able to use this database in Query Analyzer and executethe query.I am just wondering if the database name with '.' is the problem...Any pointers to proceed further.Thanks in advance-Anu
View 3 Replies View RelatedHello everyone!I have the following problem. I`ve opened a Query Analyser and write thestatement:-isql -S 'PL6XXXX' -i 'd:SQL_Server_2000Raport_WWW.sql'I got the following erorr message:Incorrect syntax near -SHow to call the statement which is placed inside the 'Raport_WWW.sql'file, which is located on folder D:SQL_Server_2000??? Do I have to doit in the cmd panel???Thank you in advance for your helpMarcin from Poland*** Sent via Developersdex http://www.developersdex.com ***
View 4 Replies View Related