Pivot With Case
Jul 21, 2013
I have a pivot script but I would like to use a case statement,See below script and result
select top 10 id,
[1421],
[1420],
[1419],
[1418]
from (
select Purchaseid,Purchaseid as id, occasionid, transactionid
from ticket_facts ) as query
pivot (count(transactionid) for purchaseid
in (
[1421],
[1420],
[1419],
[1418])) as piv
[code]....
I would like the count to be
case (count(transactionid) when >0 then 1 else 0) end
how would I use the case statement with the pivot.
View 17 Replies
ADVERTISEMENT
Oct 27, 2006
Hi there,
I am using a PIVOT to count the number of chunk for each block type:
ex.:
block_type, chunk
a, <data>
a, <data>
b, <data> ...
My problem is that the block_type is case-sensitive, 'a' should not be counted as a 'A'.
How can I take the case in consideration?
I've tried to plug a COLLATE SQL_Latin1_General_CP1_CS_AS statement but it doesn't seem to be supported... Something like:
SELECT *
FROM recv.test_Blocks
PIVOT (
COUNT(chunk)
FOR block_type COLLATE SQL_Latin1_General_CP1_CS_AS
IN ([9.], a, B, h, q)
) AS pvt
Also something like:
IN (a, A)
returns an error: The column 'A' was specified multiple times for 'pvt'.
Thanks
View 1 Replies
View Related
Jun 17, 2014
I am using a PIVOT function to obtain the Invoice Values, but they appear in different currencies so need to perform a case function.
But am struggling with the syntax;
This fails a syntax check with
Msg 156, Level 15, State 1, Line 33
Incorrect syntax near the keyword 'Case'.
[Code]....
View 2 Replies
View Related
Jun 23, 2015
Can we use case in pivot like below? I am getting an error. I want to do Pivot on condition basis.
select (
Column1
,Column2
,Column3
,Column4
,coloumn5
from Mytable
) x
pivot
(
case when Column1 = 6 then sum(Column3) else max(Column4) End
for coloumn5 in (' + @COLS + ')
)p
View 2 Replies
View Related
Aug 27, 2007
I have created a Pivot table using Case Else with a combination of Row_Number function. What I'm looking for is to try to Order it in a specific way. Manivannan.D.Sekaran, helped me with another Pivot table that I had and it worked great. So I decided to learn how to do a Pivot table using Case Else. Sample Data is the following without the Case Else
UserID LastName FirstName DocumentDesc docFileName
1 Smith Paul Resume PSmithResume.pdf
1 Smith Paul PhdStatistics phdstatstranscript.pdf
1 Smith Paul MS Applied Statistics MsAStats.pdf
1 Smith Paul MS Operation Research MsOpResearch.pdf
2 Jackson Jane MS Information Systems MsInforSystems.pdf
2 Jackson Jane Resume JaneJacksonResume.pdf
This is my query for my Pivot using Case Else:
Code Snippet
Select UserID, LastName, FirstName,
MAX(Case When RecID=1 Then DocumentDesc Else '' End)As Document1,
Max(Case When RecID=1 Then docFileName Else '' End) As DocumentFileName,
Max(Case When RecID=2 Then DocumentDesc Else '' End)As Document2,
Max(Case When RecID=2 Then docFileName Else '' End) As DocumentFileName,
Max(Case When RecID=3 Then DocumentDesc Else '' End)As Document3,
MAX(Case When RecID=3 Then docFileName Else '' End) As DocumentFileName,
Max(Case When RecID=4 Then DocumentDesc Else '' End)As Document4,
Max(Case When RecID=4 Then docFileName Else '' End) As DocumentFileName,
Max(Case When RecID=5 Then DocumentDesc Else '' End)As Document5,
Max(Case When RecID=5 Then docFileName Else '' End) As DocumentFileName,
Max(Case When RecID=6 Then DocumentDesc Else '' End)As Document6,
Max(Case When RecID=6 Then docFileName Else '' End)As DocumentFileName
From (
Select a.UserID, a.LastName, a.FirstName, b.FileName, b.DocumentDesc, b.DocumentTypeID, ROW_NUMBER() OVER(PARTITION BY a.UserID ORDER BY a.UserID) AS RecID
FROM Person a JOIN
Documents b ON
a.UserID = b.UserID
Where b.DocumentTypeID = '126d2beb-f7a1-4bf1-b9c0-dded37d3a6bc' Or b.DocumentTypeID = '9087956e-1fb0-4f3d-ba33-ef31d79141af'
) X
Group by UserID, LastName, Firstname
Order by LastName
Code Snippet
The Output is the following with the Pivot applied: (I'm excluding UserID, LastName, FirstName for space purposes)
The column headings are:
Document1 DocumentFileName Document2 DocumentFileName Document3 DocumentFileName Document4 DocFilename
The Data for document and filename columns:
Ms Information Systems MsInforSystems.pdf Resume JaneJacksonResume.pdf
Resume PSmithResume.pdf PhdStatistics Phdstatstranscript.pdf Ms Applied Statistics MsAstats.pdf
What I want is to have the column called Document1 to have only Resumes and the rest of the other columns to have the other files.
The following data places the data into one table.
Create Table #data (
[UserID] int ,
[LastName] Varchar(100) ,
[FirstName] Varchar(100) ,
[DocumentDesc] Varchar(100) ,
[docFileName] Varchar(100)
);
Insert Into #data Values('1','Smith','Paul','Resume','PSmithResume.pdf');
Insert Into #data Values('1','Smith','Paul','PhdStatistics','phdstatstranscript.pdf');
Insert Into #data Values('1','Smith','Paul','MSAppliedStatistics','MsAstats.pdf');
Insert Into #data Values('1','Smith','Paul','MSOperationResearch', 'MsOpResearch.pdf');
Insert Into #data Values('2','Jackson','Jane','MsInformationSystems', 'MsInforSystems.pdf');
Insert Into #data Values('2','Jackson','Jane','Resume', 'JaneJacksonResume.pdf');
View 4 Replies
View Related
Apr 12, 2008
I'm trying to select from a table with three columns. I want these columns to be spread out among multiple columns based on the values. I hope someone can shed some light on this. I might be able to use pivot, but don't know how the syntax would roll for this.
Here is the example of dummy values and the output I am trying to obtain.
drop table table1
create table table1
(Category int, Place int, Value int)
insert into table1 values
(1, 1, 20)
insert into table1 values
(1,2, 12)
insert into table1 values
(1,3, 30)
insert into table1 values
(2,1, 34)
insert into table1 values
(2,2, 15)
insert into table1 values
(2,3, 78)
select Category,
(select top 1 value from table1 where place = 1 and Category = t1.Category) as place1,
(select top 1 value from table1 where place = 2 and Category = t1.Category) as place2,
(select top 1 value from table1 where place = 3 and Category = t1.Category) as place3
from Table1 t1
group by Category
Thanks for the help.
View 5 Replies
View Related
Apr 13, 2015
I have created a crosstab query using the Pivot statement that returns the expected results. The results look similar to the sample below:
ItemKey Description Aflatoxin Coliform Bacteria E_Coli Fumonisin Melamine Moisture Mold Salmonella Vomitoxin (DON) Yeast
1000 Item1000 1 0 0 1 0 1 0 1 1 0
1024 Item1024 1 0 0 1 0 1 0 1 1 0
135 Item135 1 0 0 1 0 1 0 1 1 0
107 Item107 0 0 0 0 0 1 0 1 1 0
106 Item106 1 0 0 1 0 1 0 1 1 0
I'm using this statement to create the result set:
SELECT ItemKey, Description, Aflatoxin, [Coliform Bacteria], [E_Coli],[Fumonisin],
Melamine,Moisture, Mold, Salmonella, [Vomitoxin (DON)], Yeast
FROM
(SELECT tblInventory.ItemKey, tblInventory.Description,
jctProductClassificationRequiredTest.ProductTestClassID, tlbTestType.TestDescription
[Code] .....
Instead of doing a Count for the Pivot (the count will always be either 0 or 1 due to the design of the table being used), I would like to return an "X" for those records with a count of 1, and return a blank (otherwise null) for those records with a count of 0. So, the result set would look like:
ItemKey Description Aflatoxin Coliform Bacteria E_Coli Fumonisin Melamine Moisture Mold Salmonella Vomitoxin (DON) Yeast
1000 Item1000 X X X X X
1024 Item1024 X X X X X
135 Item135 X X X X X
107 Item107 X X X
106 Item106 X X X X X
I tried using a Case statement within the PIVOT portion, but I either did it incorrectly or it's not possible to do use a Case within the Pivot. Can I easily accomplish this?
View 6 Replies
View Related
May 19, 2006
Hi all,
In MyDatabase, I have a TABLE dbo.LabData created by the following SQLQuery.sql:
USE MyDatabase
GO
CREATE TABLE dbo.LabResults
(SampleID int PRIMARY KEY NOT NULL,
SampleName varchar(25) NOT NULL,
AnalyteName varchar(25) NOT NULL,
Concentration decimal(6.2) NULL)
GO
--Inserting data into a table
INSERT dbo.LabResults (SampleID, SampleName, AnalyteName, Concentration)
VALUES (1, 'MW2', 'Acetone', 1.00)
INSERT €¦ ) VALUES (2, 'MW2', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (3, 'MW2', 'Trichloroethene', 20.00)
INSERT €¦ ) VALUES (4, 'MW2', 'Chloroform', 1.00)
INSERT €¦ ) VALUES (5, 'MW2', 'Methylene Chloride', 1.00)
INSERT €¦ ) VALUES (6, 'MW6S', 'Acetone', 1.00)
INSERT €¦ ) VALUES (7, 'MW6S', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (8, 'MW6S', 'Trichloroethene', 1.00)
INSERT €¦ ) VALUES (9, 'MW6S', 'Chloroform', 1.00)
INSERT €¦ ) VALUES (10, 'MW6S', 'Methylene Chloride', 1.00)
INSERT €¦ ) VALUES (11, 'MW7', 'Acetone', 1.00)
INSERT €¦ ) VALUES (12, 'MW7', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (13, 'MW7', 'Trichloroethene', 1.00)
INSERT €¦ ) VALUES (14, 'MW7', 'Chloroform', 1.00)
INSERT €¦ ) VALUES (15, 'MW7', 'Methylene Chloride', 1.00)
INSERT €¦ ) VALUES (16, 'TripBlank', 'Acetone', 1.00)
INSERT €¦ ) VALUES (17, 'TripBlank', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (18, 'TripBlank', 'Trichloroethene', 1.00)
INSERT €¦ ) VALUES (19, 'TripBlank', 'Chloroform', 0.76)
INSERT €¦ ) VALUES (20, 'TripBlank', 'Methylene Chloride', 0.51)
GO
A desired Pivot Table is like:
MW2 MW6S MW7 TripBlank
Acetone 1.00 1.00 1.00 1.00
Dichloroethene 1.00 1.00 1.00 1.00
Trichloroethene 20.00 1.00 1.00 1.00
Chloroform 1.00 1.00 1.00 0.76
Methylene Chloride 1.00 1.00 1.00 0.51
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
I write the following SQLQuery.sql code for creating a Pivot Table from the Table dbo.LabData by using the PIVOT operator:
USE MyDatabase
GO
USE TABLE dbo.LabData
GO
SELECT AnalyteName, [1] AS MW2, AS MW6S, [11] AS MW7, [16] AS TripBlank
FROM
(SELECT SampleName, AnalyteName, Concentration
FROM dbo.LabData) p
PIVOT
(
SUM (Concentration)
FOR AnalyteName IN ([1], , [11], [16])
) AS pvt
ORDER BY SampleName
GO
////////////////////////////////////////////////////////////////////////////////////////////////////////////////
I executed the above-mentioned code and I got the following error messages:
Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'TABLE'.
Msg 207, Level 16, State 1, Line 1
Invalid column name 'AnalyteName'.
I do not know what is wrong in the code statements of my SQLQuery.sql. Please help and advise me how to make it right and work for me.
Thanks in advance,
Scott Chang
View 6 Replies
View Related
Jul 8, 2015
I have two data tables:
1) Production data with column headers: Key, Facility, Line, Time, Output
2) Costs data with column headers: Key, Site, Cost Center, Time, Cost
The tables have a common key named obviously as Key. The data looks like this:
Key
Facility
Line
Time
Output
Alpha
I would like to have two pivot tables which I can filter with ONE slicer based on the column Key. The first pivot table shows row labels Facility, Line and column labels Time. Value field is Output. The second pivot table shows row labels Site, Cost Center, and column lables Time. Value field is Cost.How can I do this with Power Pivot? I tried by linking both tables above to a table with unique Keys in PowerPivot and then creating a PivotTable where I would have used the Key from the Keys table.
View 5 Replies
View Related
Oct 13, 2015
Can I force the following measure to be visible for all rows in a pivot table?
Sales Special Visibility:=IF(
  HASONEVALUE(dimSalesCompanies[SalesCompany])
  ;IF(
    VALUES(dimSalesCompanies[SalesCompany]) = "Sales"
    ;CALCULATE([Sales];ALL(dimSalesCompanies[SalesCompany]))
    ;[Sales]
  )
  ;BLANK()
)
FYI, I also have other measures as well in the pivot table that I don't want to affect.
View 3 Replies
View Related
Oct 14, 2015
I have a simple pivot table (screenshot below) that has two variables on it: one for entry year and another for 6 month time intervals. I have very simple DAX functions that count rows to determine the population N (denominator), the number of records in the time intervals (numerator) and the simple percent of those two numbers.
The problem that I am having is that the function for the population N is not overriding the time interval on the pivot table when I use an ALL function to do so. I use ALL in other very simple pivot tables to do the same thing and it works fine.
The formula for all three are below, but the one that is the issue is the population N formula. Why ALL would not work, any other way to override the time period variable on the pivot table.
Population N (denominator):
=CALCULATE(COUNTROWS(analyticJudConsist),ALL(analyticJudConsist[CurrentTimeInCare1]))
Records in time interval (numerator):
=COUNTROWS(analyticJudConsist)
Percent:
=[countrows]/[denominatorCare]
View 13 Replies
View Related
Aug 17, 2015
How can I apply "Min" formula under a "new measure" (calculated field) within a pivot table under Power pivot 2010?Can see that neither does it allow me to apply "min" formula directly "formula box" nor could find any other option.Intent formula: "=Min(1,sum(a:b))" this isn't allowed so all I can do is "=sum(a:b)".
View 3 Replies
View Related
Mar 11, 2015
I have simple pivot table (below screenshot with info redacted) that displays a population number ("N" below), this is the denominator, a cumulative numerator number (below "#") and a simple cumulative percent that just divides the numerator by the denominator. It cumulates from top to bottom. The numerator and percent are cumulative using the below functions. There are two problems with the numerator and percent:
1. When there is not a number for the numerator, there is no value displayed for both the numerator and the percent..There should be a zero displayed for both values.
2. When there has been a prior number for the numerator and percent (for a prior month interval) but there is no number for the numerator in the current month interval, the prior month number and percent are not displayed in the current month interval--see the 3rd yellow line, this should display "3" and "16.7%" from the second yellow line.Here is the formula for the numerator:
=CALCULATE(count(s1Perm1[entity_id]),FILTER(ALL(s1Perm1[ExitMonthCategory]),s1Perm1[ExitMonthCategory] <= MAX(s1Perm1[ExitMonthCategory])))
Here is the formula for the percent:
=(CALCULATE(countrows(s1Perm1),FILTER(ALL(s1Perm1[ExitMonthCategory]),s1Perm1[ExitMonthCategory] <= MAX(s1Perm1[ExitMonthCategory]))))/(CALCULATE(COUNTROWS(s1Perm1),ALL(s1Perm1[Exit],s1Perm1[ExitMonthCategory])))
View 24 Replies
View Related
Sep 18, 2015
I have data in my Powerpivot window which was generated by a sql query. This data includes a field named 'Cost' and every row shows a value for 'Cost' greater than zero. The problem is that when I display this data in the pivot table all entries for Cost display as $0. At first I thought that maybe Cost was set to a bogus data type (such as 'text) but it is set to ''Decimal Number' so that's not the problem.Â
What is happening and how do I fix it so that my pivot table reflects the values for 'Cost'?
View 3 Replies
View Related
Nov 23, 2015
I have a data table that contains budget and actual data by month. Â I use the data to create a pivot that shows actual results next to budgeted results. Â I need a column that shows that variance between those columns. Â I think my issue is that the "Type" field contains actual and Budget. Â I sum on "Type". Â I can't seem to create a sum since those items are in the same field or am I missing something?
Table design
Month|Division|Subdivision|Type|Dept|Rate|Units|Amount
October|DC|Day|Budget|125|10.00|100|1000
October|DC|Day|Actual|125|10.00|110|1100
Output Design
DC
DAY
Actual
Budget
125 AvgOfRate
AvgOfRate
SumOfUnits
SumOfUnits
SumOfAmt
SumOfAmt
View 4 Replies
View Related
Oct 9, 2015
How to get a list of values to actually display in correct order in either a slicer or when on an axis on a pivot table?
I currently have the below list and have tried to add a preceding numeric (ex. "1. <=0") or preceding blank space, neither of which is visually great. Is there another way?
<= 0
1 - 6
7 - 12
13 - 18
19 - 24
25 - 30
31 - 36
37 - 42
43 - 48
49 - 54
55 - 60
61 - 66
67 - 72
73 - 78
79 - 84
85 - 90
91 - 96
97 - 102
> 102
View 8 Replies
View Related
Apr 13, 2015
I am using excel 2010 and creating pivot table from Power Pivot. I created a pivot table with department slicers. All is good, the problem I am having is whilst in an unfiltered position (ALL) of the slicers (departments) I get 200 pages, now when I click on a given department with say 10 pages, I still get the same 200 pages with the first 10 pages showing the data from the clicked department and 190 blank pages.
All I want is to get a WYSIWYG (What you see is what you get) of what is on the screen as my print, but I am getting extra blank pages right after the data. Â How do I resolve this.
Below are the steps I go thru to printÂ
1. Select slicers in unfiltered position (ALL)
2. Select entire pivot table
3. Select Page layout and select print area.
4. Save
5. Click on Print Preview to preview the print
6. Click on a given department in the slicer and repeat item 5, but this gives me blank pages after the data.
Do I need any other step?Â
View 2 Replies
View Related
Jul 5, 2006
I am using the pivot task to to a pivot of YTD-Values and after that I use derived columns to calculate month values and do a unpivot then.
All worked fine, but now I get this error message:
[ytd_pivot [123]] Error: Duplicate pivot key value "6".
The settings in the advanced editor seem to be correct (no duplicate pivot key value) and I am extracting the data from the source sorted by month.
Could it be a problem that I use all pivot columns (month 1 to 12) in the derived colum transformation and they aren´t available at this moment while data extracting is still going on?
any hints?
Cheers
Markus
View 3 Replies
View Related
Sep 21, 2007
Say, I have the following temporary table (@tbl) where the QuestionID field will change values over time
Survey QuestionID Answer
1 1 1
1 2 0
2 1 1
2 2 2
I'd like to perform a pivot on it like this: select * from @tbl Pivot (min(Answer) for QuestionID in ([1], [2])) as PivotTable
...however, I can't just name the [1], [2] values because they're going to change.
Instead of naming the values like this:
for QuestionID in ([1], [2], [3], [4])
I tried something like this:
for QuestionID in (select distinct QuestionID from @tbl)
but am getting a syntax error. Is it possible to set up a pivot like this:
select * from @tbl Pivot (min(Answer) for Question_CID in (select distinct @QuestionID from @tbl)) as PivotTable
or does anyone know another way to do it?
View 3 Replies
View Related
Jul 8, 2015
Is it possible to generate automatic refresh of excel 2013 table which displays some table of a power pivot model on file open?? I dont want to use pivottable (which supports this ...)
View 2 Replies
View Related
Apr 29, 2015
I have a pivot table that connects to our data warehouse via a PowerPivot connection. Â The data contains a bunch of comment fields that are each between 250 and 500 characters. Â I've set the columns in this pivot table to have the 'Wrap Text' set to true so that the user experience is better, and they can view these comment fields more clearly.
However, whenever I refresh the data, the text wrapping un-sets itself. Â Interestingly, the 'Wrap Text' setting is still enabled, but I have to go and click it, then click it again to actually wrap the text. Â This is very burdensome on the user, and degrading the experience.
Any way to make this text wrapping stick so that I don't have to re-set it every time I refresh the data?
View 2 Replies
View Related
Aug 31, 2015
How can I change my T-SQL text editor from text sensitive to text insensitive?
View 2 Replies
View Related
Jan 6, 2005
Hello:
I have created an SQL server table in the past on a server that was all case sensative. Over time I found out that switching to a server that is not case sensative still caused my data to become case sensative. I read an article that said you should rebuild your master database then re-create your tables. So after rebuilding the master database, a basic restore would not be sufficient? I would have to go and manually re-create every single table again?
Any suggestions?
View 4 Replies
View Related
May 4, 2007
Can someone point me to a tutorial on how to search against a SQL Server 2000 using a case insensitive search when SQL Server 2000 is a case sensitive installation?
thanks in advance.
View 3 Replies
View Related
Aug 17, 2005
We need to install CI database on CS server, and there are some issueswith stored procedures.Database works and have CI collation (Polish_CI_AS). Server hascoresponding CS collation (Polish_CS_AS). Most queries and proceduresworks but some does not :-(We have table Customer which contains field CustomerID.Query "SELECT CUSTOMERID FROM CUSTOMER" works OK regardless ofcharacter case (we have table Customer not CUSTOMER)Following TSQL generate error message that must declare variable @id(in lowercase)DECLARE @ID INT (here @ID in uppercase)SELECT @id=CustomerID FROM Customer WHERE .... (here @id in lowercase)I know @ID is not equal to @id in CS, but database is CI and tablenames Customer and CUSTOMER both works. This does not work forvariables.I suppose it is tempdb collation problem (CS like a server collationis). I tried a property "Identifier Case Sensitivity" for myconnection, but it is read only and have value 8 (Mixed) by default -this is OK I think.DO I MISS SOMETHING ????
View 4 Replies
View Related
May 29, 2008
I am working in a SQL server database that is configured to be case-insensetive but I would like to override that for a specific query. How can I make my query case-sensitive with respect to comparison operations?
Jacob
View 5 Replies
View Related
May 4, 2015
I have column with value of all upper case, for example, FIELD SERVICE, is there anyway, I can convert into Field Service?
View 7 Replies
View Related
Aug 19, 2007
I am curious with using replication in sql server 2005 one way from db A (source) replicating to db B(destination) in which db A has a collation of CS and db B has a collation of CI. Will there be any problems with this scenario? Thanks in advance!
View 2 Replies
View Related
Nov 5, 2007
I have a view where I'm using a series of conditions within a CASE statement to determine a numeric shipment status for a given row. In addition, I need to bring back the corresponding status text for that shipment status code.
Previously, I had been duplicating the CASE logic for both columns, like so:
Code Block...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE
[logic for condition 1]
THEN 'Condition 1 text'
WHEN [logic for condition 2]
THEN 'Condition 2 text'
WHEN [logic for condition 3]
THEN 'Condition 3 text'
WHEN [logic for condition 4]
THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This works, but the logic for each of the case conditions is rather long. I'd like to move away from this for easier code management, plus I imagine that this isn't the best performance-wise.
This is what I'd like to do:
Code Block
...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE shipment_status
WHEN 1 THEN 'Condition 1 text'
WHEN 2 THEN 'Condition 2 text'
WHEN 3 THEN 'Condition 3 text'
WHEN 4 THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This runs as a query, however all of the rows now should "Error" as the value for shipment_status_text.
Is what I'm trying to do even currently possible in T-SQL? If not, do you have any other suggestions for how I can accomplish the same result?
Thanks,
Jason
View 1 Replies
View Related
Sep 6, 2007
I am working on a C#/asp.net web application. The application has a text box that allows a user to enter a name. The name is then saved to the database.
Before the name is saved to the database, I need to be able to check if the name already exists in the database. The problem here is that what if the name is in the database as "JoE ScMedLap" and somoene enters the name as "Joe Schmedlap" which already exists in the database,but just differs in case.
In other words how do deal with case sensitiviy issues.
View 2 Replies
View Related
Jul 20, 2005
Yesterday I received a response to my CI/CS Collation problem and therecommendation was to try and restore a CI Collation database to a CSCollation database. After creating a blank CS database a full restore(Force restore over existing database) does change the Collation toCI. I'm unsure as to how I can restore without changing theCollation. Any suggestions?
View 2 Replies
View Related
Jun 27, 2007
Hi,
I've a table like,
ID Key Day Amount1 Amount2 Amount3 Amount4
1 100 1 0.00 7.00 0.00 2.00
2 100 2 8.00 0.00 0.00 0.00
3 100 3 0.00 6.00 0.00 0.00
I want to convert this table using Pivot like,
Key Day1 Day2 Day3 Amount
100 0.00 8.00 0.00 Amount1
100 7.00 0.00 6.00 Amount2
100 0.00 0.00 0.00 Amount3
100 2.00 0.00 0.00 Amount4
How can i do this? Pls explain me with query.
Thanks in advance
Jasmeeta
View 4 Replies
View Related
Apr 4, 2008
Hello all,
I am having some issues. Let me set the scene for you:
Table1:
Table2:
I hope you can get what's going on from those pics.
I'm trying to construct a datatable. the user specifies a date range, a bin no and a screen no. From that information, for each date in the date range, i want to show the added weight of each sieve for that particular bin and screen.
I hope this is at least a little clear.I really could use some help on this. thanks.
View 1 Replies
View Related
