Port Sql 2000 To Sql 2005
Apr 17, 2007Need url on good kb or article on converting sql 2000 to sql 2005 (full version not express)
Thanks,
Michael Oard
ADVERTISEMENT
SQL Server 2000 Port Question
Feb 19, 2008Hi,
I have SQL Server 2000 installed on my Windows XP (SP2) machine. I have the port set to 1433 (under Server Network Utility-->General-->TCP/IP). Here's the problem: when i run
netstat -anb
nothing is running on port 1433. What i DO have is this:
TCP 0.0.0.0:1036 0.0.0.0:0 LISTENING
[sqlservr.exe]
Before I rebooted my computer it was running on port 1032. Anyone have any idea why this is happening? Thanks.
Cant Start Sql 2000 On Port 1433
Jul 20, 2005for some reason i dont get any errors, but i believe that my server isnot running on port 1433. the tcpip protocol is selected in thenetwork configuration utility as well as name piper. the portselected is 1433. but when i telnet to 1433 i get the same errors as iwould if i telnet to a non existant port. i also tried nbstat with noluck. what else can i do? thanks
View 2 Replies View RelatedPort On Which SQL 2000 Service Listen (Not 1433)
Jun 13, 2002I have installed MS server sql 7.0 and 2000 both on my PC. The default port i know is 1433. If sql 7.0 is already installed. Which port does sql 2000 listen on.
Is there a way i can view this ?
Thanks in advance
Cheers
Hemant
MS SQL 2000 TCPIP Port Number And SQL Replication
Jul 20, 2005Hi allI'm struggling to find an answer to this one!We've configured our SQL boxes to run under a different port number,e.g. from 1433 to 4533. This works fine under our Citrix enviornmnetwhere the dsn is configured to use the new port. The problem comes interms of SQL Server management. For example, when you try andconfigure SQL Replication, it is not possible to add the subscriberunless the SQL Servce runs under port 1433, the default port. Thesame goes when you try to add the server as a registered server withinthe Enterprise Manager MMC.Does anyone know how you can configure SQL Server to run under adifferent port number, without naffecting SQL REPLICATION, etc?Many thnaksNikJoin Bytes!
View 2 Replies View RelatedSQL 2000 On Win2K AS: Failing To Bind On TCP Port 1433
Jan 11, 2001I've got SQL 2000 set up on a cluster running Windows 2000 Advanced Server (w/SP1).
Setup for Failover Clustering appeared to succeed normally on both nodes.
The SQL 2000 server logs show:
2001-01-11 10:02:57.82 server SuperSocket Info: Bind failed on TCP port 1433.
2001-01-11 10:02:57.85 server SQL server listening on Shared Memory, Named Pipes.
2001-01-11 10:02:57.85 server SQL Server is ready for client connections
I've checked to see if something else is using port 1433 (unlikely) and don't see anything.
The physical node that SQL 2000 is currently on has no other cluster resources assigned to it.
Any ideas?
Block Port 1433 On Windows 2000 Server
Jul 20, 2005HiI have a question regarding the SQL Server(SQL Server 7) port 1433.Some body is trying to hack into our Windows 2000 server through port1433. Is there a way i can close this port? I tried using a toolcalled Ipsecpol.exe ( Internet Protocol Security Policies Tool). Butwhen we run netstat, it still looks like they are able to connect tothe server using port 1433. Has anyone come across this problem? Iwould appreciate it very much if somebody could send in anysuggestions regarding this.Thanks,Ann
View 6 Replies View RelatedCant Connect To Sql 2000 From Client With All Field Available I.e Server Ip And Port
Apr 25, 2007cant connect to sql server 2000 from c# 2003
View 1 Replies View RelatedSQL Server 2005 How To Check Port
Feb 11, 2008How does one check which port SQL Server is listening to? How does one know if it is 1433 or 1434?
View 8 Replies View RelatedChanging SQL Server 2005 Tcp/IP Port
Mar 14, 2007When I change the tcp/ip port to anything other than 1433 my SSIS nor DTS packages run successfully. Does the tcp/ip port have to be on 1433 for the SSIS or DTS packages to run successfully?
View 3 Replies View RelatedSetting The Port For The Database Connection In Vs 2005 And Also In Web.xml
Feb 15, 2006I've mapped a sqlserver machine within vs2005, but when I attempt to set the database connection, I dont see place to stick the port number (even in the advanced area)... it continues to fail when I test the connection.. I can telnet into the machine on the sql server port, so I know its open to me...
Also - when I publish this to an IIS server, what is the syntax for placing the connection and port number in web.config? I've tried various settings, cant get it to work. <appSettings><add key="con" value="Server=12.123.123.123;PORT=1234;UID=*****;PWD=*****;database=mydb" /></appSettings>
Thanks in advance for the help,
Todd
Finding Port Number In SQL Server 2005
Feb 13, 2008I know the ..Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGErrorLog on the server contains the information. But that needs I to RDP to the server or open the file remotely. Is there any other way to find out the port from my SSMS connection?
I remember in SQL Server 2000 you could find the information by choosing Properties of a connection in EM and click on the Network Configuration button. (I know it works when you are ON THE SERVER! But when I tried from my desktop, pressing the button didn't do anything)
Canada DBA
Port Data From AS400 To SQL Server 2005
Jan 24, 2007Is there a good way to port data from an AS400 over to SQL server 2005? If anyone has any experience with this, can you tell me where to go to get info?
View 3 Replies View RelatedWhat Is The SQL Server 2005 Dynamic Port Range?
Jan 26, 2007Hi,
I'm setting up my SQL Server 2005 instances to use dynamic ports on one of my machines. What is the tcp port range used? I need to know the range so I can open the correct ports on my firewalls.
Thanks
Brian
SQL 2005 Unattended Install TCP Port Number
Oct 19, 2007Hi All,
I am having an issue with SQL 2005 unattended install, I cannot see where in the template.ini file you can specify the TCP port number for SQL 2005 to listen to I want to change it to a specific port number, I know you can do this in an unattended install on SQL 2000.
Also in an unattended install of SQL 2000 and 2005 is there any way you can specify the database and transaction logs location for new databases to be installed on another drive then the system databases. I know you can change this later in SQL server properties but I wanted this to be done during the install or is there a T-SQL script which can do this after?
Any help on this will be great.
Cheers
Raxso
Changing The Default Port On A Clustered 2005 Server.
Feb 7, 2007I am unclear as to which Ip address to change the standard port on. When setting up a cluster you have multiple IP address's including the nic that is used for the heartbeat. I have not found any documention on how to change both nodes to listen on a port other than 1433..
Any help would be greatly appreciated.
SSRS 2005 + MOSS 2007 Port Conflict
Apr 12, 2007hello
we have Reporting services and Office Sharepoint on the same server, but the reporting services website is on default website and won't start because MOSS is already using the port.
can i just change SSRS website port ?
thanks
Windows Firewall Port Needed For Reporting Services 2005
Jan 4, 2007Leon writes "I am trying to connect to a W2K3 Server's 2005 Reporting Server through my laptop's (WXP Pro SP2) SQL Server Management Studio.
I turned Port 1433 on in the server's Windows Firewall and was able to connect to the server's database engine from my laptop, but I have to turn Windows Firewall on the server off completely to be able to connect to the Reporting Server.
I have tried all the ports listed for SQL Server in the Microsoft documentation (TCP and UDP), but they seem to have no effect.
Can anyone tell me which port or ports I need to turn on in the server's firewall so that I can access Reporting Services through my laptop's SSMS?
Thanks in advance.
LGR"
Can't Change TCP Port Using Configuration Manager For X64 SQL 2005 SP1 Virtual Instance
Feb 27, 2007Hi, I hope someone can help me! I changed the TCP port that the default instance of SQL 2005 x64 SP1 is listening on and now SQL server won't start as the port is being used - no problem I say to myself, I'll just change it again, however I can't!
My problem is that I can not change the TCP Port back again using Configuration Manager - no matter what values I put in, after a restart of the instance it comes up with this in the IP Addresses tab for TCP/IP Properties and SQL Server won't start:
IP1
Active Yes
Enabled No
IP Address aaa.bbb.ccc.111
TCP Dynamic Ports
TCP Port 0
IP2
Active Yes
Enabled No
IP Address aaa.bbb.ccc.222
TCP Dynamic Ports
TCP Port 0
IP3
Active Yes
Enabled No
IP Address aaa.bbb.ccc.333
TCP Dynamic Ports
TCP Port 0
IP4
Active Yes
Enabled No
IP Address 10.1.1.1
TCP Dynamic Ports
TCP Port 0
IP5
Active Yes
Enabled No
IP Address 127.0.0.1
TCP Dynamic Ports
TCP Port 0
IPALL
TCP Dynamic Ports 2020
TCP Port 2020
Interestingly, the ip address that the server is listening on aaa.bbb.ccc.444 is not reported in the list of IP addresses in the configuration manager for this instance, yet it is when I view the available IP addresses for the other two instances - is this significant?
I have tried failing to the other node, changing it there, changing it at the console and also while logged onto the the virtual machine remote desktop, rebooting both nodes, etc, etc. There are two other instances on this cluster that are still working fine but I hvae not attempted to change the TCP ports they listen on.
I used the same method to change this default instance as I did for a named instance on a similarly configured cluster and it worked fine. How to fix this?
Regards, Mike
2007-02-27 12:03:17.69 Server Server is listening on [ aaa.bbb.ccc.444<ipv4> 2020].
2007-02-27 12:03:17.71 spid9s Starting up database 'tempdb'.
2007-02-27 12:03:17.72 Server Error: 26023, Severity: 16, State: 1.
2007-02-27 12:03:17.72 Server Server TCP provider failed to listen on [ aaa.bbb.ccc.444<ipv4> 2020]. Tcp port is already in use.
2007-02-27 12:03:17.75 Server Error: 17182, Severity: 16, State: 1.
2007-02-27 12:03:17.75 Server TDSSNIClient initialization failed with error 0x2740, status code 0xa.
2007-02-27 12:03:17.75 Server Error: 17182, Severity: 16, State: 1.
2007-02-27 12:03:17.75 Server TDSSNIClient initialization failed with error 0x2740, status code 0x1.
2007-02-27 12:03:17.75 Server Error: 17826, Severity: 18, State: 3.
2007-02-27 12:03:17.75 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2007-02-27 12:03:17.77 Server Error: 17120, Severity: 16, State: 1.
2007-02-27 12:03:17.77 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
Install Sql 2005 Instance With Reporting Service 2005 On Sql 2000 With RS 2000 Server
Aug 18, 2006Hi
We would like to install Sql 2005 Enterprise Edition (including database engine, reporting service, integration service and analysis service) as a sepearte instance on a server which already has Sql 2000 with reporting services and analysis services. We do not want to disturb the existing sql 2000 setup.
If we do that then what will happen to my earlier sql 2000 reporting service? Will it be upgraded to sql 2005 reporting service? I heard that reporting services are instance unaware application. Where will be the default reporting service database available?
Please help us.
Regards,
Sankar N
Can Not Run SQL Server 2005 Upgrade Advisor On Server That Does Not Use The Standard Port
Jun 7, 2007I tried creating an alias to the server to get it to connect to analyze the server but it will not recognize the SQL 2000 server as a valid server to analyze. I can use the alias to connect in EM or SSMS. Any ideas? The server is not clustered and is at SP4. I've connected to several others in my environment but this one is causing me grief!
Thanks,
Linda
SQL 2005 Thinks A SQL 2000 Backup Is Corrupt, But SQL 2000 Restores Just Fine
Jul 19, 2007I am attempting to move some SQL 2000 databases to SQL 2005. My main production database does not seem to want to move. When I use the SQL 2005 GUI the .bak backup file is marked 'Incomplete'. When I attempt to restore the backup file I get a 'RESTORE detected an error on page (0:0) in database' message. I saw a thread in the SQL Express forum suggesting trying to restore from the T-SQL level to get the GUI out of the picture and I get the same 'error on page (0:0)' message. However when I take the same file and use SQL 2000 Enterprise Manager it restores with no problems.
Any ideas?
Thanks
Mike Mattix
Bit-data From SQL Server 2000 (2005 Working, 2000 Doesn't)
May 19, 2008Hi, I am trying to edit some data from a SQL2000-datasource in ASP.NET 2.0 and have a problem with a column that has bit-data and is used for selection. SQL2005 works fine when declaring <SelectParameters> <asp:Parameter DefaultValue="TRUE" Name="APL" Type="boolean" /> </SelectParameters>When running this code with SQL2000, there are no error-msgs, but after editing a record the "APL"-column looses its value of 1 and is set to 0. Looks like an issue with type-conversion, we've hit incompatibilities between SQL200 and 2005 with bit/boolean several times before. So, how is this done correctly with SQL2000? (I've tried setting the Type to "int16" -> err. Also setting Defval="1" gave an err) ThanksMichael
View 2 Replies View RelatedProblems With SQL 2000 And 2005 On Same Machine - Can't Connect On 2000
Mar 13, 2006Hi,i have SQL 2000 and 2005 on same machine(with different intance names,of course), my laptop - XP with SP2. The 2005 works fine but i can'tconnect on SQL 2000. All the the SQL services are started.Any idea? Have i to reinstall 2000?Tks,Lourival
View 1 Replies View RelatedMerging 2000 And 2005 Databases, Save As 2000
Apr 30, 2008I have to merge the data from two databases, one is in SQL Server 2005 format, one is in 2000. The merged data will then reside on a SQL Server 2000 platform. Is there an easy way to do this through Management Studio or Enterprise Manager? Or will we have to export the data from the 2005 database to a flat file and import it into a new 2000 database. And then do the merge?
TIA
Log Shipping From 2005 In 2000 Compatibility Mode --&&> 2000 Can I Do This?
Dec 18, 2007I am in the process of migrating from Sql Server 2000 to 2005. Part of my plan is to move some database's to 2005, but use the 2000 compatibility mode for the short term. My issue is this, our DR boxes are still on SQL Server 2000, would I still be able to use our log shipping processes? Or would I be better off in starting with migrating the DR boxes to 2005 first?
Thanks in advance.
SQL 2000 To SQL 2005 Works For One 2000 Server But Not The Next
Jun 15, 2006
I have several SQL 2000 servers I need to setup transactional (non updatable) replication with. The structure is:
SQL Server 2000 as Publisher/Distributor
SQL Server 2005 Standard as Subscriber
The connection is via the Internet with snapshots using FTP.
I setup the first set (2 databases at location A). They work wonderfully. I created the publication and then subscribed using MGMT Studio for 2K5.
II am setting up the same scenario for location B. Here is my problem:
In MGMT Studio I connect to the publisher (SANDRA). I right-click a publication and choose New Subscriptions..., the publication is already selected. I click next - Run each agent at its Subscriber is selected and the only option (this is desired), I click Next
HERE IS THE PROBLEM:
On the Subscriber's screen there are no Subscribers listed. When setting up location A the subscribing server was listed and I could choose a database. The Next button is greyed out and there is no way to create/add one.
I tried setting up the subscription by right-clicking the subcribing server's Replication folder in MGMT Studio but I get the same result (except that I have to authenticate with the publishing server which works fine).
WHAT'S DIFFERENT:
Location A is SQL Server Standard (SP3) running on SBS2K3. It is obviously on a domain and so SQL Server and the SQL Agent are running under domain accounts. Location B is a Windows XP SP2 machine running SQL Server Personal Edition (it actually says Development Edition in the properties window).
The databases are the same strucutre, different data. At location A the firewall is set to allow 1433->*any* and *any*->1433 where *any* is 1024 or higher. On the XP machine the firewall is set to allow port 1433. I don't think this is the issue because I've turned the firewall off on the XP machine and I get the same result.
ANY IDEAS?
Sql 2005 Sql 2000 DB Diagrams, Re-install Sql 2000, Need Help.....
Jan 19, 2007Most of our sql servers ar still sql 2000. Our programmers created many sql 2000 database diagrams using EM. But they can not access them under sql 2005. (They now have only sql 2005 tools installed on their boxes.)
Question: can we reinstall the sql 2000 client tools on their boxes without affecting the current sql 2005 install on their boxes?
Question: is there any workaround negating the need to ihstall the sql 2000 client?
TIA,
barkingdog
VS 2005/SQL Server2005 - Direct Connection From Win Mobile Emulator To Desktop SQL Server 2000 Or 2005
Aug 10, 2007Hello Everyone,
I'm trying to connect to Desktop SQL Server 2000 from Windows mobile PC Emulator (VS 2005). I need a direct connection using connection string to SQL Server 2000 through local wireless network without IIS.
Bellow is the code that I use. After executing this code I get an error on line Conn.Open(). Error says SQL Server does not exist or access denied.
SQL is un and running, and I can log in using SA username from the desktop. Even if I chance IP for another SQL server in my connection string I still get the same error. There is no firewall of any kind running.
Dim connectionSTR As String = "Persist Security Info=False;Integrated Security=False;Server=192.168.0.202,1433;initial catalog=MyDB;user id=sa;password=;"
Dim Conn As SqlConnection
Conn = New SqlConnection(connectionSTR)
Conn.Open()
If Conn.State = ConnectionState.Open Then
MessageBox.Show("Open")
End If
About my environment: SQL Server 2000 is running on Desktop PC with Windows XP SP2. Application which I need to connect to SQL Server is in Visual Studio 2005. I execute the application in Windows Mobile PC Emulator and try to connect to SQL Server from emulator.
Your advice and help is very appreciated
Thank you
Ika
Load Backup From 2000 To 2005 Or Recreate Structure On 2005?
Apr 23, 2008Hello,
I would like to ask you if there is better to recreate database structure on 2005 from 2000 and move data or to just load
2000 backup.
Currently I loaded the backup, but I am wondering if there might be slightly better performance on 2005 when recreating structure on 2005 to loading 2000 backup?
Does loading 2000 backup create 2005 binary structure?
Thanks for help in advance
How Do SQL 2000 Service Packs Play A Role In Upgrading?i.e.Can SQL 2000 Standard With No SP Be Upgraded To SQL 2005 Standard
Aug 2, 2006How do SQL 2000 service packs play a role in upgrading? That is, can SQL 2000 Standard with no Service Packs(SP) be upgraded to SQL 2005 Standard, or does SQL 2000 Standard have to have a certain service pack??
View 1 Replies View RelatedCan I Install VS.net 2005 / VS.net 2002 / SQL 2005 / SQL 2000 In One PC Win2000 Sp4?
Dec 1, 2005P4 2.8G Hz, 512 M RAM.thanks.
View 3 Replies View RelatedWhat Will Going From Latin1_General_Bin To Latin1_General_Bin2 In SQL 2005 Do To Replication From 2000 To 2005?
Aug 3, 2006If we changed the sort order from BIN to BIN2 but kept everything else the same will it have any effect on replication? So in SQL 2005 if I were to change my default collation from Latin1_General_Bin to Latin1_General_Bin2, would that cause replication to break? I suspect that it will not be an issue since it is just sort order that is changing and the code page stays the same.
BTW, this is transactional replication. Sorry, I left that out of my original post.
Thanks,
Grant