Possible To Link 2 Stored Procedures To Produce Only 1 Recordset?
Sep 16, 2004
Hello everybody!
trying to do the following:
-create a report in access project
-got 3 stored procedures which return data that shall be shown on report
-need one recordset as datasource (or can i use more than one here?)
Problem:
Data was unrelated before, now needs to be on same report, that's why until now i have 3 different pretty complex stored procedures returning a recordset each.
I could of course copy and paste the whole 3 into 1 new stored proc, but when one changes i had to change the newly created one too (which might get messy when doing a lot of maintenance and changes on the others)
Can create a stored procedure that simply integrates those 3 into one recordset something like this (in pseudo-code):
This may be a really silly question, but I am starting to experiment with stored procedures for the first time and I am not really sure about how they work. I am working in SQL Server Management Studio Express...
When putting a SELECT query statement into a stored procedure and executing it, how or where can you get or find the actual record set supposedly retrieved?
Thanks for any help..
--------------------------set ANSI_NULLS ONset QUOTED_IDENTIFIER ONGOALTER PROCEDURE [petrander].[DynamicQuery] @taxparent int = 1ASBEGIN SET NOCOUNT ON; SELECT ID, TaxonID, Taxon FROM QueryView WHERE ParentID1 = COALESCE(@taxparent, ParentID1) AND ParentID2 = COALESCE(@taxparent, ParentID2) AND ParentID3 = COALESCE(@taxparent, ParentID3) AND ParentID4 = COALESCE(@taxparent, ParentID4) AND ParentID5 = COALESCE(@taxparent, ParentID5) AND ParentID6 = COALESCE(@taxparent, ParentID6) AND ParentID7 = COALESCE(@taxparent, ParentID7) AND ParentID8 = COALESCE(@taxparent, ParentID8)END
I am new to this forum so I am not sure if this is posted in the appropriate group.
Okay - this may be a silly question - what is a crosslink table? Is this easily achieved in the MySQL query browser? Here is some more details on what I am trying to achieve. I have seen it done but not sure where to start....
The products correspond as follows:
- To be eligible for 'product a' the buyer must meet two qualifications:
1. Specify their 'model of their engine.' 2. Specify the 'year' of their engine.
Is there a way to structure my tables so that if a person specifies 'a specific year' and 'specific model' the correct product A, B, or C will pull up for them?
Do I create separate tables named 'Engine Model' and 'Engine Year' -- and then link to the product table with foreign keys? If so, how do I specify more than one grouping. For example product A is compatible with 2004-2007 engines and 10 different engine models.
I am new to mySql -- but a quick study -- hopefully this is easy to implement.
In a report called ICD_PrivateHospital, I have designed to show output to two table from two store procedures. 1st store proc: usp_RPT_Private and 2nd store proc: usp_RPT_Private2.
I have created both the store procs and it is executing successfully. I also have designed the Crystal Report in Visual Studio 2008.
I have added both the store procs in the crystal report with no error. I only wants to show top 20 records. It is running successfully when I add the fields and parameters from the first store procedure. But when I add the 2nd store procedures fields into the report, duplication occurs for both the results in store proc 1 and store proc 2. How to solve this issue?
I want to know the differences between SQL Server 2000 storedprocedures and oracle stored procedures? Do they have differentsyntax? The concept should be the same that the stored proceduresexecute in the database server with better performance?Please advise good references for Oracle stored procedures also.thanks!!
This Might be a really simple thing, however we have just installed SQL server 2005 on a new server, and are having difficulties with the set up of the Store Procedures. Every time we try to modify an existing stored procedure it attempts to save it as an SQL file, unlike in 2000 where it saved it as part of the database itself.
i am using .NET front end and back end SQL Server 2k. for insert, update, delete and select queries what should i use stored procedure or direct sql through front end.
I need to return a rowset from a stored procedure. The returned rows will have ten columns and need to be bound to a gridview. Here is a code snippet. 'Create a DataAdapter, and then provide the name of the stored procedure.MyDataAdapter = New SqlDataAdapter("TMPTABLE_QUERY", MyConnection) 'Set the command type as StoredProcedure. MyDataAdapter.SelectCommand.CommandType = CommandType.StoredProcedure 'Create and add a parameter to Parameters collection for the stored procedure.MyDataAdapter.SelectCommand.Parameters.Add(New SqlParameter("@condition_cl", _ SqlDbType.VarChar, 100)) 'Assign the search value to the parameter.MyDataAdapter.SelectCommand.Parameters("@condition_cl").Value = sqlwhere & orderby 'ASSIGN THE OUTPUT PARAMETERS. HERE IS WHERE I NEED HELP (?????????????????)
DS = New DataSet() 'Create a new DataSet to hold the records. MyDataAdapter.Fill(DS, "TMPTABLE_QUERY") 'Fill the DataSet with the rows returned. 'Set the data source for the DataGrid as the DataSet that holds the rows.GridView1.DataSource = DS.Tables("TMPTABLE_QUERY").DefaultView GridView1.DataBind() MyDataAdapter.Dispose() 'Dispose of the DataAdapter. MyConnection.Close()
In my little research, I have seen examples of how to return a single value, but not multiple rows. I essentially have two problems. I'm not sure how my output parameters are to be defined and added. Do I need a separate 'Parameters.Add' statement for each column field value returned or can I do a single 'Parameters.Add' statement to define the whole row as an output parameter? Also, upon returning from the call to the SP, will I need a looping mechanism to populate the recordset for each individual record returned, or will the 'MyDataAdapter.Fill(DS, "TMPTABLE_QUERY") suffice, as included in my code above? Thanks in advance.
I am trying to write a stored procedure that will execute a SQL statement that returns multiple records. Then I need to be able to step through each record, examining a value in one of the fields (and then perform subsequent actions depending on the value).
My problem is that I don't know how to step through a recordset in T-SQL. There doesnt seem to be a "recordset" type object that I can move through. Or can this be done via a cursor? If so, how?
SELECT * FROM v_reimbursement_report WHERE facility_key = @facility_key
/*IF @facility_key <> null PRINT "0" BEGIN SELECT * FROM v_reimbursement_report WHERE facility_key = @facility_key END*/
When I uncomment the commented lines, I can still get a recordset returned using the query analyzer. And I get the same recordset returned when I use VB ADO and leave the stored proc lines commented out. However, when I call the procedure using the same VB code with the stored proc lines uncommented, I get -1 returned for rs.recordcount:
Private Sub Main_Click() On Error GoTo Err_Main
Dim lsFacility As String Dim lsReportName As String Dim rs As ADODB.Recordset Dim cmd As ADODB.Command Dim gconn As ADODB.Connection Dim param_facility_key As ADODB.Parameter
Dim gConnString As String
gConnString = "Trusted_Connection=Yes;UID=sa;PWD=yoyo;DATABASE=y ada;SERVER=ya;Network=dbnmpntw;Address=ya;DRIVER={ SQL Server};DSN=''" Set gconn = New ADODB.Connection Set rs = New ADODB.Recordset Set cmd = New ADODB.Command gconn.Open gConnString
Dear all, I have a big problem in using SQL Server stored procedures: When I have two select statement in the same procedure, the first one will use for returning specific information for the second one to select appropiate result to the client, but the stored procedure just return the first select statement recordset! What can I do? (I use VB Data Environment to access the stored procedures)
Is it possible to have a stored procedure that passes recordsets which are created and passed from different tables and joins the information in those recordsets to form one group of information?
In a nutshell, I am trying to set a combobox's row source using a stored procedure. Surely there is an easy way to do that.
I am working with SQL 2000 as my back-end, and my front-end is an Access Project. The stored procedure I am trying to run is on a different database then the one my project is connected to, but from what I can see in my de-bugging efforts, that is not the problem.
SELECT dbo.TIMS_eeLinksByName.eeLink, dbo.TIMS_eeLinksByName.Employee FROM dbo.TIMS_eeLinksByName WHERE (dbo.TIMS_eeLinksByName.eeErNum = @EmployerNum) ORDER BY dbo.TIMS_eeLinksByName.Employee
returns 169 records when I run it directly from the MS Visual Studio environment.
However whe I try to run it from VBA with the following code;
Dim sp_eeLinksByName As String Dim ConnectionString As String Const DSeeLinksByName = "SOS-1" Const DBeeLinksByName = "Insync" Const DPeeLinksByName = "SQLOLEDB"
Dim objeeLinksByNameConn As New ADODB.Connection Dim objeeLinksByNameRs As New ADODB.Recordset Dim objeeLinksByNameComm As New ADODB.Command
' Connect to the data source. objeeLinksByNameConn.Open ConnectionString
' Set a stored procedure objeeLinksByNameComm.CommandText = sp_eeLinksByName objeeLinksByNameComm.CommandType = adCmdStoredProc Set objeeLinksByNameComm.ActiveConnection = objeeLinksByNameConn
' Execute the stored procedure on ' the active connection object... ' "CurrTSCalendar" is the required input parameter, ' objRs is the resultant output variable. objeeLinksByNameConn.sp_eeLinksByName CurrTSEmployer, objeeLinksByNameRs
' Display the result. 'Debug.Print "Results returned from sp_CustOrdersOrders for ALFKI: " Select Case objeeLinksByNameRs.RecordCount Case 0 'Do Nothing Case Is > 0 'Get the Employee List objeeLinksByNameRs.MoveFirst Do While Not objeeLinksByNameRs.EOF MyControl.AddItem (objeeLinksByNameRs.Fields("eeLink") & ";" & objeeLinksByNameRs.Fields("Employee")) objeeLinksByNameRs.MoveNext Loop End Select
'Clean up. 'objRs.Close objeeLinksByNameConn.Close Set objeeLinksByNameRs = Nothing Set objeeLinksByNameConn = Nothing Set objeeLinksByNameComm = Nothing
I get an "Object Variable or With Blick Vraiable not Set"...... for the life of me I do not know why? Does anyone have any thoughts?
The stored procedure I created returns all records from the table if no parameters are passed, as expected. When I pass in the only parameter, I get 0 records returned when there should be one or more returned. I'm sure it's something simple in my syntax, but I don't see it.
This call returns all records: exec webservices_BENEFICIAL_USES_DM_SELECT
This call returns 0 records, when it should return 1: exec webservices_BENEFICIAL_USES_DM_SELECT @DISPOSAL_AREA_NAME='Cell 8'
Here is the stored procedure: ALTER PROCEDURE [dbo].[webservices_BENEFICIAL_USES_DM_SELECT] -- Add the parameters for the stored procedure here @DISPOSAL_AREA_NAME DISPOSAL_AREA_NAME_TYPE = NULL AS BEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON;
-- Insert statements for procedure here IF @DISPOSAL_AREA_NAME IS NULL BEGIN SELECT* FROMBENEFICIAL_USES_DM END ELSE BEGIN SELECT* FROMBENEFICIAL_USES_DM WHEREDISPOSAL_AREA_NAME = '@DISPOSAL_AREA_NAME' END
Hi All. My question is this. I have a complex stored procedure in SQLServer which works fine when I run it in Query Analyzer. However, whenI call it within my ASP script, it returns nothing, and sometimes locksup. If I change my script to call other existing stored procedures itworks fine. It's just with this particular stored proc. I have triedvarious DB calls in ASP, such as opening the recordset through an ADOconnection and through the Command object but to no avail. Here is mySQL:SET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS OFFGOALTER PROCEDURE dbo.sp_getProfessionalsByTypeID@typeID intASdeclare @catID intdeclare @userID intdeclare @strUserName varchar(100)declare @strFirstName varchar(100)declare @strLastName varchar(100)declare @strTypeName varchar(100)declare @strCategoryName varchar(100)declare @strPictureURL varchar(100)declare @sql varchar(1000)declare @a varchar(100)declare @b varchar(100)declare @c varchar(100)declare @d varchar(100)beginset @a=''set @b=''set @c=''set @d=''--Create Temp TableCREATE TABLE #QueryResult (nCatID int, nTypeID int, nUserID int,strUserName varchar(100), strFirstName varchar(100), strLastNamevarchar(100), strTypeName varchar(100), strCategoryNamevarchar(100),strPictureURL varchar(100))--Search QuerybeginINSERT #QueryResultSELECTdbo.tbl_musician_type.nCatID, dbo.tbl_musician_type.nTypeID,dbo.tbl_users.nUserID, dbo.tbl_users.strUserName,dbo.tbl_users.strLastName,dbo.tbl_users.strFirstName,dbo.tbl_musician_type.strTypeName, dbo.tbl_category.strCategoryName,dbo.tbl_professionals.strPictureURLFROMdbo.tbl_musician_type INNER JOINdbo.tbl_category ON dbo.tbl_musician_type.nCatID= dbo.tbl_category.nCategoryID INNER JOINdbo.tbl_profile ONdbo.tbl_musician_type.nTypeID = dbo.tbl_profile.nTypeID INNER JOINdbo.tbl_users ON dbo.tbl_profile.nUserID =dbo.tbl_users.nUserID LEFT OUTER JOINdbo.tbl_professionals ON dbo.tbl_users.nUserID= dbo.tbl_professionals.nUserIDWHEREdbo.tbl_musician_type.nTypeID = @typeIDend--Create Temp TableCREATE TABLE #QueryResult2 (ID int IDENTITY,nCatID int, nTypeID int,nUserID int, strUserName varchar(100), strFirstName varchar(100),strLastName varchar(100), strTypeName varchar(100), strCategoryNamevarchar(100),strPictureURL varchar(100), strArtist varchar(100),strAlbumTitle varchar(100), strRecordLabel varchar(100), strYearvarchar(100))--Now Declare the Cursor for Speakersdeclare cur_musicians CURSOR FOR--Combined Results Groupedselect distinct nCatID, nTypeID, nUserID, strUserName, strLastName,strFirstName, strTypeName, strCategoryName, strPictureURLFrom #QueryResultopen cur_musiciansfetch next from cur_musicians INTO @catID, @typeID, @userID,@strUserName, @strLastName, @strFirstName, @strTypeName,@strCategoryName, @strPictureURL--Loop Through Cursorwhile @@FETCH_STATUS = 0beginSELECT TOP 1 @a = strArtist, @b=strAlbumTitle,@c=strRecordLabel, @d=strYearFROM dbo.tbl_profile_discogwhere nTypeID = @typeID AND nCategoryID = @catID AND nUserID =@userIDinsert #QueryResult2select @catID as nCatID, @typeID as nTypeID, @userID as nUserID,@strUserName as strUserName, @strLastName as strLastName, @strFirstNamestrFirstName, @strTypeName as strTypeName, @strCategoryName asstrCategoryName, @strPictureURL as strPictureURL, @a ashighlightArtist, @b as highlightAlbumTitle, @c as highlightRecordLabel,@d as highlightYearfetch next from cur_musicians INTO @catID, @typeID, @userID,@strUserName, @strLastName, @strFirstName, @strTypeName,@strCategoryName, @strPictureURLset @a = ''set @b=''set @c=''set @d=''endselect * from #QueryResult2 TI--Clean Upclose cur_musiciansdeallocate cur_musiciansdrop table #QueryResultdrop table #QueryResult2endGOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGO
Hi All, I'm hoping somebody can help me with this as it is driving me mad. I've created a stored procedure which returns Employee information recordset when the windows username is passed to it as a parameter. I want to then store this information in Session variables so content can be filtered depending on employee status, but when I execute my code no records are returned. I know for a fact that the stored procedure works because I bound it sqldatasource and displayed results from it in a Datalist and tested it in sql server. My code is as follows can anybody see any problems with it, in runs through fine with but when I try a read a field from the datareader in says there is no data to read. Dim CurrentUser As String, Pos1 As Int16, EmployeeId As Int32 Dim cn As New System.Data.SqlClient.SqlConnection Dim param As New System.Data.SqlClient.SqlParameter Dim reader As System.Data.SqlClient.SqlDataReader Dim cmd As New System.Data.SqlClient.SqlCommand
cmd.Parameters.Add(param) reader = cmd.ExecuteReader(CommandBehavior.CloseConnection) EmployeeId = reader.Item("EmployeeID") reader.Close() Any help would be much appricated this is driving me mad. Thank You Shaft
I'm having trouble getting a recordset out of stored procedure in ADO. The SP executes without errors, but the recordset object I return into is always closed.Here is my code:
<% ...... Set cmm = Server.CreateObject("ADODB.Command") Set cmm.ActiveConnection = Connect cmm.CommandType = adCmdStoredProc cmm.CommandText = "dbo.client_updates_proc" cmm.Parameters.Refresh cmm.Parameters(1) = client_id Set logRS = cmm.Execute() if not logRS.EOF then ...... %>
My SP has one parameter, which I set above, and it ends with a select statement. When I run the SP in Query Analyzer, it outputs the table of results as is should, but I always get an error on 'if logRS.EOF then', saying that the object is closed.
I have a recordset returned from a stored procedure executed in the form open event. Could this recordset append to the form's recordsource property in the form's open event in VB? if so, what's the syntax?
Private Sub Form_Open(Cancel As Integer) dim ...
Set add_bag_results = Nothing With add_bag_results .ActiveConnection = CurrentProject.Connection .CommandType = adCmdStoredProc .CommandText = "spSampling_add_bag_results" .Parameters.Append .CreateParameter("ret_val", adInteger, adParamReturnValue) '.Parameters.Append .CreateParameter("@lotnum", adInteger, adParamInput, 4, rs_add_bag_results(1)) .Parameters.Append .CreateParameter("@lotnum", adInteger, adParamInput, 4, lot_n) .. Set rs_add_bag_results = .Execute End With
Using SQL 2005, SP2. All of a sudden, whenever I create any stored procedures in the master database, they get created as system stored procedures. Doesn't matter what I name them, and what they do.
For example, even this simple little guy:
CREATE PROCEDURE BOB
AS
PRINT 'BOB'
GO
Gets created as a system stored procedure.
Any ideas what would cause that and/or how to fix it?
Hi I need to know if it is possible to write on a table from another database and this using a stored procedure. If yes what is the correct syntax to connect to the other database.
I have created an Access2003 project (existing data) that links to external data. First I connected to a SQL Server 2000 database. Success. Then I tried to set up a Transact SQL data connection to a legacy MDW-secured Access97 database. (A third-party VB6 application goes against it, and we don't have the source code, so we cannot upgrade it.)
The Transact SQL link tests OK but I cannot select any of the tables or queries from the list presented. However, with the same credentials, I can use these same objects in Excel 2003.
When setting up the link in Access2003, I specify JET 4.0 OLE DB Provider, I enter the MDW file on the All tab, a username and a password on the Connection tab where I browse to the MDB file, and specify Shared Deny None on the Advanced tab. When I test the connection, it tests OK ("Test connection succeeded"). Yet on the "Select the Database and Table/Cube which contains the data you want" dialog, "(Default)" appears in the grayed-out dropdown. Then, beneath that dropdown, there is a grid with Name and Description columns. The grid contains query names but the grid is not enabled. The list of queries is this table is grayed out. Neither of the scrollbars works.
BUT... if I use the SAME username and password in Excel2003, and specify the same MDW, there is no problem working with these same database objects in the legacy Access97 database. WHAT IS DIFFERENT ABOUT THE WIZARD IN EXCEL THAT ALLOWS IT TO SUCCEED AND THE WIZARD IN ACCESS THAT CAUSES IT TO FAIL HERE? In Excel, the list of available providers says Microsoft Access Driver, not JET 4.0 OLE DB Provider.
When trying to link to an SQL table in Access 2003, the software appears to be malfunctioning.
The sequence of events is File - Get External Data - Link Tables - Files of Type: ODBC Databases().
The Problem: On two of my computers, the select data source window does not pop up, preventing me from linking to any ODBC data source.
Observations: This function has worked normally in the recent past and works on other computers running Access 2003. One difference between the computers working and non-working computers is Norton Antivirus 2006 (recent upgrade).
Has anyone experienced anything like this? What's going on?
I am coding a DataList control for 2 column data from a stored procedure. The 1st column isprogramName and the 2nd is programLink. I used Edit Template -> Edit DataBonding to add<h ref="http.....>, but can not get it right. Please help. Also, what is the Parameter Sourcefor using Logon User ID as a stored procedure paramter when configuring a SqlDataSource? None, cookie, control,..? TIA,Jeffrey <asp:DataList ID="DataList1" runat="server" DataSourceID="SqlDataSource1" Style="z-index: 16;left: 29px; position: absolute; top: 82px"><ItemTemplate>programName:<asp:Label ID="programNameLabel" runat="server" Text='<%# Eval("programName") %>'></asp:Label><br />programlink:<asp:Label ID="programlinkLabel" runat="server" Text='<%# Eval("programlink") %>'></asp:Label><br /><br /></ItemTemplate></asp:DataList><asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:iTemplatesConnectionString %>"SelectCommand="MyPrograms" SelectCommandType="StoredProcedure"><SelectParameters><asp:Parameter Name="meid" Type="Int32" DefaultValue="3532" /></SelectParameters></asp:SqlDataSource>
I am developing a website in visual stadio 2005 and i use vb as a programming language. I use image button control to show advertisemet in the website. i need to link advertisement to others website URL. The URLs are sql driven( I stored them in SQL database). what should i to do? Please help me. Thanks
If I define a table-valued function in a SQL Server 2005 database, can I link to it from Access 2003 using ODBC?
I've defined the function successfully, and I can link from Access to tables in the database (so my ODBC link is basically functioning), but I can't see the table-valued function in the Linked Table Manager in Access.
I can define a pass-through query to grab the table, but with a pass-through query I have to provide the ODBC password every time.
How do I search for and print all stored procedure names in a particular database? I can use the following query to search and print out all table names in a database. I just need to figure out how to modify the code below to search for stored procedure names. Can anyone help me out? SELECT TABLE_SCHEMA + '.' + TABLE_NAME FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_TYPE = 'BASE TABLE'
Seems like I'm stealing all the threads here, : But I need to learn :) I have a StoredProcedure that needs to return values that other StoredProcedures return.Rather than have my DataAccess layer access the DB multiple times, I would like to call One stored Procedure, and have that stored procedure call the others to get the information I need. I think this way would be more efficient than accessing the DB multiple times. One of my SP is:SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, S.Name AS 'StatusName', S.ItemDetailStatusID, S.InProgress as 'StatusInProgress', S.Color AS 'StatusColor',T.[Name] AS 'TypeName', T.Prefix, T.Name AS 'ItemDetailTypeName', T.ItemDetailTypeID FROM [Item].ItemDetails I INNER JOIN Item.ItemDetailStatus S ON I.ItemDetailStatusID = S.ItemDetailStatusID INNER JOIN [Item].ItemDetailTypes T ON I.ItemDetailTypeID = T.ItemDetailTypeID However, I already have StoredProcedures that return the exact same data from the ItemDetailStatus table and ItemDetailTypes table.Would it be better to do it above, and have more code to change when a new column/field is added, or more checks, or do something like:(This is not propper SQL) SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, EXEC [Item].ItemDetailStatusInfo I.ItemDetailStatusID, EXEC [Item].ItemDetailTypeInfo I.ItemDetailTypeID FROM [Item].ItemDetails IOr something like that... Any thoughts?
I have MSSQL 2005. On earlier versions of MSSQL saving a stored procedure wasn't a confusing action. However, every time I try to save my completed stored procedure (parsed successfully ) I'm prompted to save it as a query on the hard drive.
How do I cause the 'Save' action to add the new stored procedure to my database's list of stored procedures?
I am wondering if you guys have any experience with failing Stored Procedures running inside a SSIS package with the following error:
===================================================== Message Executed as user: GAALPSVR034FSYSTEM. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 8:51:22 AM Error: 2008-05-19 09:06:55.15 Code: 0x00000000 Source: usp_SLIM_Site_PreProcess Description: TCP Provider: The specified network name is no longer available. End Error Error: 2008-05-19 09:06:55.18 Code: 0xC002F210 Source: usp_SLIM_Site_PreProcess Execute SQL Task Description: Executing the query "Exec usp_SLIM_Site_PreProcess" failed with the following error: "Communication link failure". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 8:51:22 AM Finished: 9:06:55 AM Elapsed: 932.203 seconds. The package execution failed. The step failed. ======================================================
Sometime it fails when gets called through a job and sometimes even when a package is open in a design mode. The actual Stored Procedure NEVER fails if called in SQL Server Management Studio.
Any ideas or suggestions will be very helpful and appreciated Thanks for your help!
We recently upgraded to SQL Server 2005. We had several stored procedures in the master database and, rather than completely rewriting a lot of code, we just recreated these stored procedures in the new master database.
For some reason, some of these stored procedures are getting stored as "System Stored Procedures" rather than just as "Stored Procedures". Queries to sys.Objects and sys.Procedures shows that these procs are being saved with the is_ms_shipped field set to 1, even though they obviously were not shipped with the product.
I can't update the sys.Objects or sys.Procedures views in 2005.
What effect will this flag (is_ms_shipped = 1) have on my stored procedures?
Can I move these out of "System Stored Procedures" and into "Stored Procedures"?
