Hi
I need this script to work on any instance:
exec master..xp_cmdshell 'bcp mosaikDB741.dbo.FilelistInput in csvFilePath.csv -t -c -userName -Ppassword -Sinstance'
Can I customize it more in order if someone runs it on a different instance or server it won t fail. All he will need to replace is the username, password and make sure there is mosaikDB741.dbo.FilelistInput table and csvFilePath.csv file
Thanks a lot.
We have a SQL 2008 Instance existing on active/passive cluster with 2 nodes running on Windows server 2008 R2 Ent. Edn.
Now we need to install another SQL instance on this cluster. So what are the prerequisites apart from new IP address? Do we need shared disks or can the existing disks can be utilized?
Say I have 2014 AlwaysOn setup and working:
SQLNode1 ->Instance01
SQLNode2 ->Instance02
When I setup my listener: ListenerA...Do I need to use the instance name in it?
ListenerAInstance01 or ListenerAInstance02 depending on which SQLNode is the "active" availability group?
Am I better off to use the same instance name for both nodes, since my goal is to have all databases on both instances in the same availability group and sync'd? When SQLNode1 migrates over to SQLNode2 I will need to update the instance name in my connection string on the listener from ListenerAInstance01 to Instance02? When I connect with SSMS do I just use: ListenerAInstance01 (or 02)?
What are the minimum requirements for setting up replication ?
i mean, the connection requirements, bandwidth requirements, minimum hardware and software requirements ?
Is it possible to setup a replication across the internet ?
2 questions pls:
1/ can we use bcp also in windows authentication mode or only in sql server mode.
Because when i try to execute bcp from dos using windows account (my machine account since m runing XP) I get the error:
The user is not associated with a trusted SQL Server connection
but when i switched to sql server authentication mode. the new username and password worked well when used in BCP from command prompt.
so my question: how do i make bcp work when using win auth mode instead of sql auth mode
Thanks a lot
I have a script which creates a new user. I also have a webpage which uses the DB for various reasons. In the DB config file I use the following to connect to the DB;
<ConnectionString>User Id=<username>;Password=<pword>; DataBase=<DBname>; Server = <servername>;</ConnectionString>
For the username and password I use the newly created user information but I can’t connect. However if I use “sa� to login I have no problem. Is this a case of some crappy SQL prerequisites?? i.e. automatically checking “Enforce password expiration� or “user must change password at next login� in the user properties. If I change the password for the new user in properties I can connect no problem.
Is there a way around this, so I don’t have to change the password before I can connect to the DB?
Thanks in advance
Regards
Toby
I have a script which creates a new user. I also have a webpage which uses the DB for various reasons. In the DB config file I use the following to connect to the DB;
<ConnectionString>User Id=<username>;Password=<pword>; DataBase=<DBname>; Server = <servername>;</ConnectionString>
For the username and password I use the newly created user information but I can€™t connect. However if I use €œsa€? to login I have no problem. Is this a case of some crappy SQL prerequisites?? i.e. automatically checking €œEnforce password expiration€? or €œuser must change password at next login€? in the user properties. If I change the password for the new user in properties I can connect no problem.
Is there a way around this, so I don€™t have to change the password before I can connect to the DB?
Thanks in advance
Regards
Toby
Hi!
I want to deploy an application that require the SQL Server Compact Edition 3.5 to be installed..... and I want to deploy my application with ClickOnce!
But, the problem is that I can't select "SQL Server Compact Edition" in the prerequisites of the Visual Studio Project properties... ???
Do you have a solution ?
thx!
I marked previous post as answered but I'm having another problem now.
The previous problem was that I didn't have some prerequisites. The log files say:
**************
Report Designer component requirement
<B>Explanation:</B> Visual Studio .NET 2003 is not installed.
<B>Action:</B> Install Visual Studio .NET 2003, and then rerun Setup to install Report Designer. Or, continue Setup to complete the installation without Report Designer.
Report Server component requirement
<B>Explanation:</B> ASP.NET version 1.1 is not installed or is not registered with your Web server. ASP.Net is required for the Report Server and the Report Manager components.
<B>Action:</B> Install ASP.NET 1.1, and then rerun setup to install Report Server or Report Manager components. To use the Report Server component, ASP.NET 1.1 must be registered with your Web server. Or, you can continue Setup to complete the installation without these components. For more information about ASP.NET requirements, see the Reporting Services readme file.
Report size = 1082
<Func Name='SetDotNetProperties'>
<Func Name='FSetupLogging'>
<Func Name='CreateSetupLogCabs'>
Creating Setup Logs Cab "C:Program FilesMicrosoft SQL Server80RS Setup BootstrapLOGRSStp_.cab"
The thing is that in the ADDLOCAL section of template.ini I didn't include Report Designer.
ADDLOCAL=RS_Admin_Tools,RS_BooksOnline_EN
Is Report Designer needed for the administrative tools and the books online? Or is that this too components need those prerequisites too? I ask because I installed manually without thos prerequisites, and it gave me no problems.
Thanks a lot once again!
I've two instances(Default, Named[dynamicsFINANCE]) running on SQL server 2014. However, when I try to connect to named instance say (dynamicsFINANCE) using SQL authentication from local SSMS, I get below error message:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
I assigned a static port number to the named instance [dynamicsFINANCE] 1450. I also setup the firewall rule to allow access to Port 1450.
Hi fellows,
I have to migrate all objects alogwith all constraints,SP,Triggers, indexes etc from Development instance to Production instance of a DB, all those things are created through wizard ie. Sql server 2000 Enterprise Manager. if i use DTS it only mirates data along with tables and views but constraints,SP,Triggers, indexes etc not yet copied.
can any body help me how can I solve this problem by copying all objects alogwith all constraints,SP,Triggers etc from Development instance to Production instance.
This is Sql server 2000 Cluster environment.
thanks in advance for any help
rahman
I have a 3 node cluster on which I have installed SSAS as it's own insntance. I have created this as a named instance and can connect to it by serverinstance if I'm on the server itself. However from my desktop I get the error saying instance was not found on server name.
I have defined an alternate port and setup firewall rules and can connect via server:port but not serverinstance. Prior to making this change SSAS was running on default port of 2383 and I could connect just by servername.
I have read many articles for previous versions saying that clustered SSAS will always use 2383 and that you must connect just using servername. However and this is were it gets strange. I have a 2 node UAT cluster with SSAS setup exactly the same way I've described above and I can connect from my desktop as serverinstance.
Should I be able to connect as serverinstances for a named clustered instance in 2012 ?
Hi, I have a task in hand to migrate (upgrade) from SQL2K named instance to SQL2K5 default instance. There are many intranet applications touching current SQL2K. I would like to perform this upgrade such that I don't have to touch any application code - meaning I don't have to change the connectionstring to point to new Default instance. How can I achieve this?
So, in otherwords, here is what I want to achieve:
Current Server: SQL2K: SERVER_AINSTANCE_A (named instance)
Upgraded Server: SQL2K5: SERVERB (default instance)
If I have both default, I could achive this by setting up DNS alias after migration done so that any call for SERVER_A would point to SERVER_B. But in my case, I don't have SERVER_A, I have named instance. Is there any solution?
Regards,
Vipul
Hi,
I want to move one database from the source SQL Server 2000 instance to a new SQL 2000 instance in another machine. I have five user databases in this source SQL instance. How should be my approach to move this single database out of this ? My understanding is restoring this database in the new instance, copying all logins to the new instance and then copying the jobs, DTS packages, alerts, operators only specific to this database will do it. Please let me know if this is exactly what I should do ..
Thanks in advance..
Regards,
Himansu
Hi,
I want to move one database from the source SQL Server 2000 instance to a new SQL 2000 instance in another machine. I have five user databases in this source SQL instance. How should be my approach to move this single database out of this ? My understanding is restoring this database in the new instance, copying all logins to the new instance and then copying the jobs, DTS packages, alerts, operators only specific to this database will do it. Please let me know if this is exactly what I should do ..
Thanks in advance..
Regards,
Himansu
I am trying to set up a Named Instance of SQL 2000 on the same machine that has a default instance of SQL 7.0. The setup always completes and I am able to register the Named Instance of the SQL Server with which it was installed on. However, when I try to connect the users to the database, with both windows and SQL authentication, I receive a SQL server not found error. I have tried an alias setup as well as physically specifying the port number in settup up an ODBC connection.
Has anyone ran into similar problems?
Also, has anyone been able to successfully complete the process as mentioned above?
I have a server with sql server 2005 installed as the default instance -- I have a piece of software that needs SQL2000 to be the default instance. Is there a way other than install new sql2005 named instance and move databases to rename my SQL2005 instance from <machinename> to <machinename>sql05 for example?
Bryan
Hi all,
i have installed SQL client instance on my Desktop "Machine-A", and i used to connect to SQLServer2000 running on another "Machine-B" by using valid username and password.
i created a DTS package and i used to run it. im very confused how the communication happens between the two machines and which process run where and which initiates which and which machine allocates waht resources. im really interested to know all these things. if any one know plz help me out.
Thanks in advance.
I have SQL Server 2000 Standard Edition (sp3a) running on a windows 2003 (sp4) Server.
It is a Production Server with 3 NAMED Instances and NO Default Instance.
Does anyone know if I can rerun the SQL Server Install and add a DEFAULT Instance to this box without disrupting the other Named Instances???
I work for a mid size company with the usual collection of enterprise applications. We are trying to consolidate our SQL environment consisting of around 100 databases none of which are over 100GB with the average database size around 5GB. Recently a large server was purchased as the "Big Daddy" SQL box. Obviously not all the databases will be moved to this one box but within reason a number can.
My question: What is the best way to configure the box?
1 OS & 1 Default Instance - How do we isolate loops memory leaks etc...
1 OS & Multiple instances, ie:Dedicated instance for each application. - How do you allocate CPU & memory, allow for optimum performance without putting others at risk from a rouge process?
Virtualized OS for each application with a default instance - Too much overhead impacts performance?
Future plans include offsite replication, perhaps mirroring with failover.
I'd appreciate anyone else's thoughts ideas? How have you tackled this problem in your environment?
Thanks
Scott
I installed SQL Server 2005 recently on a cluster. I didn't go for the default instance and instead I named the instance option. Now I would like to migrate everything from the named instance to the default instance, which I haven't yet installed.
Is this an easy process? What about the logins and the maintenance plans and jobs? Is there anything else I need to be aware of?
Hi
I've never had to do this, but when I downloaded the Web Workflow Approvals Starter Kit, it requested that I install the database into a User Instance of .SQLEXPRESS.
Now the problem is, I've installed it onto a default instance, so I was wondering whether you can create a named instance on top of a default instance... and if so, how would you do that?
Cheers
Chris
Got windows Vista Business edition, installed Visual Web Developer Express, SQL Server 2005 Express SP2, SQL Server Management Studio SP1 in that order. I was developing in VWD express without problems using WinXP but now on Vista Business, the local connection to SQL server appears to be a problem.
I know there's nothing wrong with my web.config or anything like that as it was working perfectly prior to running under Vista. If i specify the database on the live website, it works fine. If I specify the test database in app_data folder, I get the following exception:-
Server Error in '/UKSD' Application.
Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +736211
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1959
System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +237
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +374
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +192
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.Security.SqlRoleProvider.GetRolesForUser(String username) +771
System.Web.Security.RolePrincipal.IsInRole(String role) +272
System.Web.Configuration.AuthorizationRule.IsTheUserInAnyRole(StringCollection roles, IPrincipal principal) +120
System.Web.Configuration.AuthorizationRule.IsUserAllowed(IPrincipal user, String verb) +300
System.Web.Configuration.AuthorizationRuleCollection.IsUserAllowed(IPrincipal user, String verb) +191
System.Web.Security.UrlAuthorizationModule.OnEnter(Object source, EventArgs eventArgs) +3509206
System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +92
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
Version Information: Microsoft .NET Framework Version:2.0.50727.312; ASP.NET Version:2.0.50727.312
I am taking a guess it's somerthing to do with access issues, but can't find anything out on searching the forums etc..
I am setup as an administrator, running VWD as an administrator and for the record, SQL Server Management Studio express works fine.
Another small issue, when I run the application from VWD, I always have to minimise the application and restore it as the graphics get corrupt.
Please help!! I cannot debug when running of the live website.
The box I am trying to connect to is running two instances of SQL Server.
There is a SQL Server 2005 instance which is the default. There is a SQL Server 2000 instance which is named 'SQLSERVER'.
I can connect to the SQL Server 2000 instance no problem:<add key="ConnectionString" value="server=MYPCSQLSERVER;database=mydatabase;user id=****;password=****" />
However, I am having trouble connecting to the Default SQL Server 2005 instance. I have tried:
<add key="ConnectionString" value="server=MYPC;database=mydatabase;user id=****;password=****" />
but it doesn't work. I have tried explicitly setting SQL Server 2005 to use port 1434 (as SQL Server 2000 is running on port 1433), and then used:
<add key="ConnectionString" value="server=MYPC,1434;database=mydatabase;user id=****;password=****" />
but this doesn't work either.
Am I mssing something here? Any help much appreciated
Thanks...
As a starter i tried to modify and translate the Personal Website Starters kit from the VS2005Team SDK.
When i'm working on the machine were it's installed , under debugging, all works great.
But when i try to develop from my laptop, via RDP on the develop machine, i've got this message and can not debug (connect to the SQLxpres Server)
Does anybody now a solution ??
Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.
Source Error:
Line 5: Sub Application_Start(ByVal sender As [Object], ByVal e As EventArgs)
Line 6: AddHandler SiteMap.SiteMapResolve, AddressOf Me.AppendQueryString
Line 7: If (Roles.RoleExists("Administrators") = False) Then
Line 8: Roles.CreateRole("Administrators")
Line 9: End If
This is the connecting string
<add name="Personal" connectionString="Data Source=.SQLExpress;Integrated Security=True;User Instance=True;AttachDBFilename=|DataDirectory|Personal.mdf" providerName="System.Data.SqlClient" />
<remove name="LocalSqlServer"/>
<add name="LocalSqlServer" connectionString="Data Source=.SQLExpress;Integrated Security=True;User Instance=True;AttachDBFilename=|DataDirectory|aspnetdb.mdf" />
my web app was working fine but as soon as i added in a page and few store procedures and 2 tables it just pop up with that error message.
Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.
i did go into the folder C:Documents and SettingsdnguyenLocal SettingsApplication DataMicrosoftMicrosoft SQL Server Datasqlexpress and delete the directory but this didnt help much. I still get the same error message. please help
Hello,
I have just reinstalled windows xp pro with service pack 2 and framework 2.0.
I am using SQL Express and visual studion 2005.
I am trying to run my website and i keep getting this error message, i followed few instructions but i still failed to make it work. could someone who faced similar issues guide me,
thanks
MM
Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.
Source Error:
Line 112: Public Overridable Property Theme() As String
Line 113: Get
Line 114: Return CType(Me.GetPropertyValue("Theme"),String)
Line 115: End Get
Line 116: Set
Source File: C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Fileswroxunitedeecd65d2e1a6a798App_Code.ws-dzmjl.6.vb Line: 114
Stack Trace:
[SqlException (0x80131904): Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.]
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +437
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.Profile.SqlProfileProvider.GetPropertyValuesFromDatabase(String userName, SettingsPropertyValueCollection svc) +766
System.Web.Profile.SqlProfileProvider.GetPropertyValues(SettingsContext sc, SettingsPropertyCollection properties) +428
System.Configuration.SettingsBase.GetPropertiesFromProvider(SettingsProvider provider) +410
System.Configuration.SettingsBase.GetPropertyValueByName(String propertyName) +117
System.Configuration.SettingsBase.get_Item(String propertyName) +89
System.Web.Profile.ProfileBase.GetInternal(String propertyName) +36
System.Web.Profile.ProfileBase.get_Item(String propertyName) +68
System.Web.Profile.ProfileBase.GetPropertyValue(String propertyName) +4
ProfileCommon.get_Theme() in C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Fileswroxunitedeecd65d2e1a6a798App_Code.ws-dzmjl.6.vb:114
Wrox.Web.GlobalEvents.ThemeModule.app_PreRequestHandlerExecute(Object Sender, EventArgs E) in C:WebsiteWroxUnitedApp_CodeThemeModule.vb:30
System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +92
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
If you were asked to install SQL 2005 on a machine, would u install a default instance or a named one? And why would u choose one over the other?? Also, r there any issues with using a default instance?
Thank you for all your help.
Hello everyone,
I am new in .NET development and currently trying to learn VWB through Microsoft online tutorials.
Here is the problem that prevents me from getting further:
in VWB, when you right click App_Data and chose "Add New Item" and then select SQL database, the following error message is displayed:
"Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed."
If I cancel out of it, it does generate mdf file under App_Data folder in Solution Explorer, but when I try to open it, it says:
"The item does not exist in the Web directory. t may have been moved, renamed or deleted." and that is where the whole sharade deadends.
I can connect via mycomputersqlexpress under Data Connections in Database Explorer (it then adds "master.dbo" to the path) and then create custom tables, but that is not the same, isn't it? I mean, this will not integrate my database tables through default configuration that I am trying to follow?
All this happens on local machine.
Thanks to everybody who can help!
Jeff
when I try to connect to an mdf as a power user,
---------------------------
Microsoft Visual Basic 2005 Express Edition
---------------------------
Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.
---------------------------
OK
---------------------------
I was able to do do this before until Saturady when I had to re-install sql server, and express etc due to some system problem on my xp Pro PC. What have I misconfigured?
I do see the service SQL Serer(SQLEXPRESS) started under Network Service and SQL Serfver(MSSQLSERVER) started under local system.
My power user ID does have modify access to the sql 90 database folders. and to the mdf.
No wonder Microsoft is giving it away for free. It€™s not worth anything. I am very disappointed in this version of SQL server. I decided to start learning VB so I downloaded and installed VB 2005 express edition and SQL 2005 express. I tried to build a personal website using the starter kit. I kept getting the following error message, for which I have seen numerous postings on this forum.
€œFailed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.€?
I went out and bought the Standard version of VS 2005 thinking there may be a feature that the free express version is lacking. I uninstalled the express version, cleaned the registry, deleted all the folders it created and installed the Standard edition. Then I tried to create a personal web using the starter kit and it does the same thing again.
I can not create a database file, connect to a database file. I can not create or attach a database on the SQL 2005 express from VS 2005. The SQL server Express seems to be working OK since I can attach to it using Microsoft SQL Server Management Studio Express. There is something about the way VS tries to connect to the database server that is not working. VB does recognize the local computer as a SQL server but can not connect to it.
SQL server is set to accept Shared memory, TCP/IP and named pipes for local clients.
What is causing this?
This is some information on the system I am using:
MS XP (SP2)
Microsoft Visual Studio 2005
Version 8.0.50727.42 (RTM.050727-4200)
Microsoft .NET Framework
Version 2.0.50727
Installed Edition: Standard
Microsoft SQL Server Management Studio Express 9.00.1399.00
Microsoft Data Access Components (MDAC) 2000.085.1117.00 (xpsp_sp2_rtm.040803-2158)
Microsoft MSXML 2.6 3.0 4.0 5.0 6.0
Microsoft Internet Explorer 6.0.2900.2180
Microsoft .NET Framework 2.0.50727.42
Operating System 5.1.2600
I am now to programming but nor computer illiterate. I have been working with MS SQL servers since version 6.5 and have MCSE, Network+, A+ and Security plus certifications. Installing and using VS should not be this problematic. What is wrong with Microsoft?
Hello everybody,I was configuring a SqlDataSource control using SQL Authentication mode.I first added a database file (testdb.mdf) through Solution Explorer-Add New Items. Then through Database Explorer I created a table named "info"Then while configuring the SqlDataSource control I used the SQL Authentication mode and attached the "testdb.mdf" database file.Test Connection showed success. But when I hit the Ok button of the wizard it displayed the following error message:Failed to generate a user instance of SQL Server. Only an integrated connection can generate a user instance.While configuring the SqlDataSource control I clicked "New Connection". Under Data Source section I tried both Microsoft SQL Server and Microsoft SQL Server Database File. And in both the cases I attached a databese file(testdb.mdf). Plz enlighten me on this.Thanks and Regards,Sankar.
View 1 Replies View RelatedThis is the scenario. Is it possible to create views or something (like Oracle DB Links) in a database in Instance 1 which can show data from another database in 2nd Instance ?
I want to do this to create reports.