I got below error :
Could not find allocate space for object 'tablename' in DB, because the primary file group is full
Upon investigation I found :
datafile is reached it's maximum size
DB Size space allowcated 197 MB, space free 20.69 MB
DB mdf 194880 KB, ndf 6272 KB
It's production server, please let me know how to proceed now?
Weird. I have an Agent job that populates some warehouse data every night. It's been working fine for over a year. Then it fails with a message that thePRIMARY file group is full. The database is set to Simple recovery, automatic, unrestricted growth by 10% for both the log file and the data file. The drive it's on has 96GB free. The data file is 1.5GB and the log is 2MB and there's not very much fluctuation in the amoutn of data going into it.
Anybody have an idea why that would happen?
Thanks for any insight,Pete
Primary file group is full for one user db
This is production server
Total db size is 132186 MB
data file is 12000 MB, set automatically grow
and restrict file growth is 121024 MB
Now there is 30 GB space on drive
I have added space to file 3 times(1GB, 10GB, 3 GB) and incresed restrict file growth also(5GB). database is in simple recovery mode.
stille I am getting above error, pleasee let me know how to proceed now?
Hi there,I've just run some DTS packages on my test sqlserver (Which has limitedhard disk space and memory) and all the tasks have failed, due to'PRIMARY' file group is fullIs there a query or script I can run to resolve this problem??M3ckon*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedPrimary file group is full for one user db
This is production server
Total db size is 132186 MB
data file is 12000 MB, set automatically grow
and restrict file growth is 121024 MB
Now there is 30 GB space on drive
I have added space to file 3 times(1GB, 10GB, 3 GB) and incresed restrict file growth also(5GB). database is in simple recovery mode.
stille I am getting above error, pleasee let me know how to proceed now?
Customer site has detached their database and deleted the .ldf file and reattached because they want to decrease the log file size. They set their log size to restricted file growth and 5mb. After about 20 minutes they started getting "Transaction log is full" so I had them up the transaction log to 50mb. After about another 20 mins everyone on the network started getting errors saying that data cannot be added because the PRIMARY file group was full ("Could not allocate space for object TrussLumber in Database ATP because the primary file group is full").
There is plenty of disk space so I know thats not the problem. And they can add data to other databases, so I cant imagine what could possibly be causing this....Can anyone help me out?
Thanks!
Craig
I got below error :
Could not find allocate space for object 'tablename' in DB, because the primary file group is full
Upon investigation I found :
datafile is reached it's maximum size
DB Size space allowcated 197 MB, space free 20.69 MB
DB mdf 194880 KB, ndf 6272 KB
It's production server, please let me know how to proceed now?
We set the database to : automatically grow file, unstricted file growth, grow by 10%.
As I understand it will automatically grow, why we recieved error message like primary file full.
Why shrinkfile empty file does not redistribute data evenly in the primary file group with multiple files:
Please run the script attached to see what the end result is.
This is what I set up last night on my test machine.
1) Create database [FGTest] size 200MB
2) Create table called TEST on primary
3) Insert 40MB of data into test
4) Create another file group called temp in primary size 200MB
5) Shrinkfile('FGTest',emptyfile) so that all data is transfered from FGTest into temp file group.
6) Add another 2 files called DATA2 and DATA3. Both are 200MB.
7) We now have 3 empty files that I want data distributed evenly on. FGTest, DATA2 & DATA3
8) Shrinkfile('temp',emptyfile) to move all the data from temp over the 3 file groups evenly
I would expect at this stage to have the following:
FGTest = 13MB,
DATA2 = 13MB,
DATA3 = 13MB
(40MB of data over 3 files should be about 13 MBish in each file)
What I actually end up with is this:
FGTest = 20MB
DATA1 = 10MB
DATA2 = 10MB
It looks as though SQL Server is allocating 50% of all data to the original file and then 50% evenly over
the remaining files in PRIMARY.
Hi,
I´m trying to move one table to another filegroup, the actual table is created in the primary group, so I´m trying to do this:
ALTER DATABASE hemsa_dev
ADD FILEGROUP Bitacora
- .- add mi file group
ALTER DATABASE hemsa_dev
ADD FILE
(
NAME = hemsa_devBitacora,
FILENAME = 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDatahemsa_devBitacora.ndf',
SIZE = 500MB,
MAXSIZE = Unlimited,
FILEGROWTH = 10%
) TO FILEGROUP Bitacora
-- And I want to add my table in my new filegroup
-- Im trying with:
ALTER TABLE BitacoraPeso ON bitacora
- - or
ALTER TABLE BitacoraPeso MOVE TO bitacora
But It doesnt work....
Any Idea??
Regards
Hi folks,
I got a message that 'Could not allocate space for object '(SYSTEM table id: -732777483)' in database 'TEMPDB' because the 'DEFAULT' filegroup is full.
Connection Broken'
Can you tell me how to solve this problem?
Thanks in advance.
Mike.
I have a database around 500 GB. right now the database have only one data file and one log, it has only one filegroup also.all the indexes and table are placed in Primary Filegroup . we are going to separate them. the planing is to move all the indexes to Secondary filegroup and all the table will be in Primary filegroup.But there will be a problem while implementing it because there are around 600 tables and each table have at least 2 non-clustered index , so is there any way to move all the index to Secondary Filegroup.
View 3 Replies View RelatedA little background on what I am trying to achieve first. We are moving to Azure virtual machines and we will have 8 disks on the SQL Server box. I am adding more files to the primary file group and each file will go on its own drive. I am then rebalancing data across these files by rebuilding all of the indexes on the tables which is working fine. No problems so far all is good.
I now have an additional problem. If there is a lob or blob column on the table, rebuilding the clustered index and all the non clustered indexes doesn't rebalance the blob or lob data across the disks such as it does with in row data.
I cannot find any articles on rebalancing lob or blob data because all the articles say to move to a new file group. I do not want a new file group, I just want to use the primary file group where the data already resides, and just redistribute it evenly in the same way that I can in row data which is working fine.
One solution I thought about was to BCP data out of the table, truncate the table and then BCP back into the table which I imagine would have the desired effect of distributing the data evenly over the files.
partition with single file group or multiple file group which one best.
we have some report running from partition table, few reports don't have any partition Key and after creating 400 partition with 400 file group it is slow.what is best practices to crate 400 file group or single file group.
I have around 9 index to a table and when I transfer my table with the help of Import/Export utility I get this error, can any1 tell me, why do I'm getting this error and I don't have help on that.
Error:
--------
Error at Destination for Row number 2279. Errors encountered so far in this task: 1
could not allocate space for object 'a_pua01_tblmdlmast' in database dbDev because the primary filegroup is full
---------
Thankx for ur help
I have encounting this problem:
DESCRIPTION:Error: 1105, Severity: 17, State: 2
Could not allocate space for object 'iislog' in database 'IISLOG' because the 'PRIMARY' filegroup is full.
I have check to see if the file is autogrow and it is. Is there a way to solve this problem?
Thanks
Hi,
i got this error, "could not allocate space for ... in database... because PRIMARY filegroup is full." when i tried to create a table then insert some data approx. 400000 rows with a SP.
Here is the code segment of SP
SELECT @SQL = 'Create Table [Raw].dbo.[TEST1]('
SELECT @SQL = @SQL + '[xID] [int] IDENTITY (1, 1) NOT NULL ,[fTime] [datetime] NOT NULL ,
[fID] [int] NULL ,
[fName] [nvarchar] (50) COLLATE Turkish_CI_AS NULL ,
[bid] [real] NULL ,
[ask] [real] NULL ,
[high] [real] NULL ,
[low] [real] NULL ,
[bidTrend] [int] NULL ,
[askTrend] [int] NULL ,
CONSTRAINT [PK_TEST1] PRIMARY KEY CLUSTERED
(
[xID],
[fTime]
) ON [PRIMARY]
)ON [PRIMARY]'
Exec (@SQL)
SELECT @SQL_INS = 'INSERT INTO [Raw].dbo.[TEST1]('
SELECT @SQL_INS = @SQL_INS + '[fID],[fName],[bid],[ask],[high] ,[low] ,[bidTrend] ,[askTrend] ,[fTime]) SELECT [fID],[fName],[bid],[ask],[high] ,[low] ,[bidTrend] ,[askTrend] ,[fTime]
FROM [Raw].dbo.[AUD/CAD]
'
Exec (@SQL_INS)
Dear All,I am new in MS Sql Server.I am facing a error"'PRIMARY' filegroup is full".I went through the all previoussubmitions.But still this error is coming.Please help me out.I have Installed Microsoft Sql Server 2000. It was working perfectly.Present Database Details========================..mdf size 3.91 GB from Explorer and fromEnterprise Manager Space Allocated 4007 MB------------------------------------------..LDB size 3.79 GB from Explorer and fromEnterprise Manager Space Allocated 177 MB-----------------------------------------Auto Incementation is On-----------------------------------------File Growth in Percentage 10-----------------------------------------Remaining Space in Drive 7 GB=========================But at the time of importing data getting error==========================='PRIMARY' filegroup is full===========================What should be the reason?Thanks in advanceRegardsArijit Chatterjee
View 2 Replies View RelatedI seem to be having problems with a very simple install of MSDE on aWindows 2000 Server. When attempting to add new records, I receivethe message "Could not allocate space for object 'MyTable' in database'MyDatabase' because the 'PRIMARY' filegroup is full."I have dealt with countless issues like this in the past and they havebeen easily resolved due to max limit of MSDE, trans log full, or thehard drive where the database is stored is full. None of these appearto be the case in this instance. The system has been working fine forabout a year.The Master database is 11 MB. MyDatabase is 33 MB. The log files areboth under 1 MB. I have 730 MB of storage available on the drivewhere the database is stored.I downloaded MSDE off of Microsoft's website and installed with thefollowing switches: BLANKSAPWD=1 SECURITYMODE=SQL. I create a userin MSDE that is the DBO for MyDatabase. Other than that, I make nochanges to the default installation.
View 1 Replies View RelatedI am running a copy object DTS and consistently get the error 'cannot allocate space for <objectname> because the primary filegroup is full.
I've got auto-grow on with unliminted growth. There is more than enough space on our Data and Log file disks. I haven't reached teh 32TB limit of the filegroup size by any stretch of the imagination. The source datbase is 250mb yet even when I create the destination DB at 300mb I still get the error!
Also, I tried creating a secondary filegroup and this didn't help, either.
Any suggestions would be appreciated.
Colleen
Could not allocate space for object 'dw_MasterClaim_ProcLine' in database 'fl1stDwProd2' because the 'PRIMARY' filegroup is full..
I have two db's prod1 and prod2.
I looked at the properties of each.
On the tab Data Files both of these have the same file name (prod2).
One has 5897 space allocated and the other 13162.
Not sure why they are like this or even if it's correct. Could this be my problem? If so, how can I fix?
I have just added a 500G USB drive. I have created a DB on it and am attempting to export data to it. The problem is I keep getting:
Could not allocate space for object 'dbo.Matched' in database 'MyDBK' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup
The drive is empty so there is plenty of room. How do I set auto gro or something so this error goes away?
(SQL SERVER 2000)
I keep getting the "primary filegroup is full" error when ever I try to write data even though the following things are true:
allow unlimited growth set for BOTH database and transaction log
auto shrink and auto update statistics flags are set in database options
growth set to 10 percent for both
database is 4GB but disk has 12GB freespace
transaction log is on same disk but is only 8MB ???
SQL shows the database has 2% free space but any attempts to write cause the error, shrinking drops this to 1% but still produces the same error on writes
SQL shows the transaction log has 90% free space
backup maintenance plans are in operation for both transaction log and database (write to different drive)
I am completely confused!
Can anyone help please?
I am getting the following error:
Msg 1105, Level 17, State 2, Line 1
Could not allocate space for object 'dbo.SORT temporary run storage: 162781324115968' in database 'tempdb' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.
Msg 9002, Level 17, State 4, Line 1
The transaction log for database 'tempdb' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
Regards,
Krishna
*Learning IT from experience*
We are having full backup every day and hourly transactional log backups during the working hours in our production server which is running sql server2008 R2 as a clustered instance. For the Db's under simple recovery model we are having full backups. Now we want to implement transaction log shipping to a remote server in another site. I understand that log shipping involves the restoration of a full backup initially in the remote server and then restoring the transactional log backups which are shipped to it ,on a no recovery basis.
My question is whether we can continue taking the full backups every day in the production sever which is given for offsite storage. Will the full backups taken in the primary server, after the log shipping has been implemented, affect the log backups which are restored into the remote server. Will the chain of log backups which are restored into the secondary server be affected in any manner if a full backup is taken in the primary?
I have an error on the phpbb message board I am using. I have a MS SQL database and cannot figure out what I get this error. How could I fix this?
The full error is:
Could not allocate space for object 'phpbb_topics' in database 'adultsiblinggrief' because the 'PRIMARY' filegroup is full.
I have a table with multiple products from different suppliers. there will duplicate products in my db as Supplier A may stock the same product as Supplier B. I have a business rule that only one unique product can be online at one time and as such I want the cheapest product from the 2 Suppliers to be displayed where there is a match.
I have been trying a Group By clause and also a partition by but my problem is returning the primary key for the winning row (minimum price).
here is an example
CREATE TABLE #TempTable(
productcode nvarchar(50),
productname varchar(50),
productmanufacturer varchar(50),
saleprice money,
tyrewidth varchar(5),
[Code] ....
How can I return the productcode in the above query for the row with the cheapest price? If I try MIN(productcode) or MAX(productcode) it will not always return the product code associated to the min price.
I am getting the below error message while performing Bulk Insert/Update operation.
Could not allocate space for object 'dbo.pros_mas_det'.'PK__pros_mas__3213E83F22401542' in database 'admin_mbjobslive' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.
My Current SQL Server version :
Microsoft SQL Server 2008 R2 (RTM) - 10.50.1600.1 (X64)  Apr  2 2010 15:48:46  Copyright (c) Microsoft Corporation Express Edition with Advanced Services (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)Â
My current database size crossed the limit size of 10 GB.
I have 3 synchronous AlwaysON replicas: A, B and C. A is primary, B and C are secondary and both are set to Automatic recovery. How can I understand, which of them (B or C) will become primary when A goes offline? Well, Actually my final DB system should support following configuration:
1) Normally - A is primary B and C are sync secondary.
2) if A fails, B automatically becomes primary, C remains Sync secondary.
3) if A goes online, it becomes primary againÂ
4) C becomes primary only after A and B fail (and there still should be cluster quorum!)
As I understood, first of all i should configure quorum the following way: A-0, B-1, C-1, folder-witness-1.
The problem, again, is: I cannot understand how to configure which replica becomes primary when AG fails over.
I have a customer they are running raid 5 on a windows 2000 server one of the drives went bad. The customer replaced the drive and raid rebuilt the drive, every thing seamed to be fine but there is one database file that cannot be attached to SQL. The file is 15G so I know there is information the error states that the file is not a Primary file. Any clue on how to fix this?
mdf file size 5,738,944 KB
ldf file size 10,176 KB
Using SQL Server 2005 (9.0.3042), I can not get a full-text search query to work with order by or group by. For example, if I run the following query...
SELECT s.networkID, i.interID
FROM Interactions i
INNER JOIN CONTAINSTABLE(Interactions, text, 'ipo') t ON t.[key] = i.interID
INNER JOIN Sessions s ON i.sessionID = s.sessionID
WHERE i.startTime BETWEEN 1051772400000 AND 1054537199000
It returns two rows immediately.
If I add an "order by" or "group by" like...
SELECT s.networkID, i.interID
FROM Interactions i
INNER JOIN CONTAINSTABLE(Interactions, text, 'ipo') t ON t.[key] = i.interID
INNER JOIN Sessions s ON i.sessionID = s.sessionID
WHERE i.startTime BETWEEN 1051772400000 AND 1054537199000
ORDER BY s.networkID, i.interID
The CPU shoots to 100% and I have to kill the query. I have tried many variations of the above and I can not get the query to work with order by or group by. Is this a bug in SQL Server? Is there a fix or workaround?
I Create an availibility Group with a primary and a secondary. (For test)
Then run Planed Failover.
Switched to secondary. That's ok.
After that I update some tables on secondary (That now is primary)
I Run Again Planed Failover on server 2.
Switched. OK
But primary database Get (Not synchronizing) Status.
And in primary I don't have that updates.
How to sync these databases and exit from Not synchronizing.
I setup an availability Group. (Only 2 servers - Primary And secondary) -- 21 , 22
I also define an listener . IP .. 23
1- In First step I connected To Listener (23) And in a while I inserted A record to a table .
While 1=1
insert into Tbl_T1(f1,f2) Values (1,2)
2- in second, I Stop the primary .
- I expected this while whitout disconnect, continue.
3- The while code stopped whit this message :
Msg 64, Level 20, State 0, Line 0 A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)
4- I execute again the script, And it worked in new primary.
My questions :
1- is the listener disconnected between switched primary and secondary ? OR have we data loss between switching?
2- I did some huge update on Primary that fill the Log fiel space. And in last Update I got this error :
Msg 9002, Level 17, State 2, Line 27
The transaction log for database 'Your_DB' is full due to 'LOG_BACKUP'.
Is this (Fill All space) a reason to switch primary? Or not ?