Hi,
My database has a table. This table has a column ( named : No.) set to be a primary key, and it's ( identity). When several people access the database in the same time and add some data, some of them will see this error message : ( column (No.) doesn't allow repeated values) How can I solve this problem?
Thanks.
We've had two instances now where when there is a network connection timeout to the mirror from the primary, the primary db server goes to 100% utilization and refuses all connections.
The first time we had to reboot the primary, the 2nd time mirroring picked up again 10 minutes later.
There are two dbs being mirrored, one is 15gig, the other 4gig. Both boxes are running SQL2005 64 bit and Win 2003 64bit.
This happened at 6am and typically there shouldn't be a lot of traffic at that time but here are the error messages in the SQL log below.
We are going to try and move db communications to a separate network and network card - but this looks like either a bug in mirroring or a configuration problem on our end - though it works just fine other times.
Any thoughts/suggestions would be greatly appreciated.
Thanks!
Mark
SQL Error Log:
11/01/2006 06:12:12,Logon,Unknown,The server was unable to load the SSL provider library needed to log in; the connection has been closed. SSL is used to encrypt either the login sequence or all communications<c/> depending on how the administrator has configured the server. See Books Online for information on this error message: 0x2746. [CLIENT: 10.16.7.7]
11/01/2006 06:12:12,Logon,Unknown,Error: 17194<c/> Severity: 16<c/> State: 1.
11/01/2006 06:12:12,Logon,Unknown,The server was unable to load the SSL provider library needed to log in; the connection has been closed. SSL is used to encrypt either the login sequence or all communications<c/> depending on how the administrator has configured the server. See Books Online for information on this error message: 0x2746. [CLIENT: 10.16.7.7]
11/01/2006 06:12:12,Logon,Unknown,Error: 17194<c/> Severity: 16<c/> State: 1.
11/01/2006 06:12:12,Logon,Unknown,The server was unable to load the SSL provider library needed to log in; the connection has been closed. SSL is used to encrypt either the login sequence or all communications<c/> depending on how the administrator has configured the server. See Books Online for information on this error message: 0x2746. [CLIENT: 10.16.7.2]
11/01/2006 06:12:12,Logon,Unknown,Error: 17194<c/> Severity: 16<c/> State: 1.
11/01/2006 06:12:11,spid22s,Unknown,Database mirroring connection error 4 '10054(An existing connection was forcibly closed by the remote host.)' for 'TCP://PYTHAGORAS.test.com:7024'.
11/01/2006 06:12:11,spid22s,Unknown,Error: 1474<c/> Severity: 16<c/> State: 1.
11/01/2006 06:04:53,spid26s,Unknown,Database mirroring is inactive for database 'NewScribe'. This is an informational message only. No user action is required.
11/01/2006 06:04:53,spid26s,Unknown,The mirroring connection to "TCP://PYTHAGORAS.test.com:7024" has timed out for database "NewScribe" after 10 seconds without a response. Check the service and network connections.
11/01/2006 06:04:53,spid26s,Unknown,Error: 1479<c/> Severity: 16<c/> State: 1.
11/01/2006 06:04:53,spid24s,Unknown,Database mirroring is inactive for database 'HL7Transfer'. This is an informational message only. No user action is required.
11/01/2006 06:04:53,spid24s,Unknown,The mirroring connection to "TCP://PYTHAGORAS.test.com:7024" has timed out for database "HL7Transfer" after 10 seconds without a response. Check the service and network connections.
11/01/2006 06:04:53,spid24s,Unknown,Error: 1479<c/> Severity: 16<c/> State: 1.
Hello all,
We have a Windows 2003 Web Edition server serving a site through IIS. It connects to a Windows 2003 Standard Edition server running SQL 2000 SP3a.
This site receives the following error as seen in the topic:
[DBNETLIB][ConnectionRead (recv()).]General network error. Check your network documentation.
We've configured the server network utility to only allow TCP/IP connections. The connection string for the site is as follows:
<%
' FileName="Connection_ado_conn_string.htm"
' Type="ADO"
' HTTP="false"
' Catalog=""
' Schema=""
MM_connSpankMSSQL_STRING = "Provider=sqloledb;Data Source=SERVER_IP,1433;Network Library=DBMSSOCN;Initial Catalog=ourmaindb_1;User ID=ourmaindb_1;Password=hotcookies;"
%>
Any ideas or tips on solving this issue? We've noticed it is due to larger queries as smaller ones do work with no problems.
The servers are behind a BSD box running iptables, has 1433,1434 along with standard web ports wide open. Anything outbound is allowed.
Some further testing via ODBC on the IIS server improved things. No more connection pooling for the SQL Server driver allows for 1/3 of the query to run. Still 2/3s of it doesn't show up, and that general network error message appears.
Should have 330 rows if it works right.
Hi
While running a DTS, many times the error message: "[DBNETLIB][ConnetionWrite (WrapperWrite()).]General network error. Check your network documentation." appears.
Does somebody knows why?
I am running the DTS from a computer (not the server where the DTS is stored) and it is connected without any problem when this happens.
Thanks!!
Regards
Lautaro - Argentina.
Hi Every one,
I am using .Net 1.1 for my web application.
And my database server is SQL Server 2005.
My application is running fine, as i can login to it and also able to view pages. But when i open Order management(having 3K records) its give me error,
General Network Error. Check your network documentation
I have also searched many articles and tried following solutions but nothing working
- connectiontimeout = 0, max pool size = 7500/100, pooling = false
- SSL disabling enforce security false as mentioned in microsoft kb article.
And there's nothing any issue with hardware/firewall as my application's login and other forms are working fine(which use same database with same connection string)
Can any one please help me to solve this error?
With Regards,
Hi We have a written a error log in Global.asax. which capture below mentioned error in the prodcution server. Same applications is working fine in some locations and some loactions we are getting the error.Any body knows why this error is occurs.Any body knows why this error is occurs. Error Message:General network error. Check your network documentation.Stack Trace: at System.Data.SqlClient.SqlInternalConnection.OpenAndLogin() at System.Data.SqlClient.SqlInternalConnection..ctor(SqlConnection connection, SqlConnectionString connectionOptions) at System.Data.SqlClient.SqlConnection.Open() at datalayer.sqldb.Execute(String ProcedureName, SqlParameter[] Parameters) at lms.User.GetUserDetails(String strUserid)ITs at LMS.Login.w_btn_Login_Click(Object sender, EventArgs e) at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
View 2 Replies View RelatedHi,I am using .Net 1.1 for my web application.And my database server is SQL Server 2005. My application is running fine, as i can login to it and also able to view pages. But when i open Order management(having 3K records) its give me error,General Network Error. Check your network documentation I have also searched many articles and tried following solutions but nothing working- connectiontimeout = 0, max pool size = 7500/100, pooling = false- SSL disabling enforce security false as mentioned in microsoft kb article. And there's nothing any issue with hardware/firewall as my application's login and other forms are working fine(which use same database with same connection string) Can any one please help me to solve this error?
View 2 Replies View RelatedWhen I try to update the site setting, I get this Error and I don't know how to fix.
Server Error in '/DotNetNuke' Application.
--------------------------------------------------------------------------------
General network error. Check your network documentation.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: General network error. Check your network documentation.
Source Error:
Line 281:
Line 282: myConnection.Open()
Line 283: myCommand.ExecuteNonQuery()
Line 284: myConnection.Close()
Line 285: End Sub
Source File: C:DotNetNukeComponentsAdminDB.vb Line: 283
Stack Trace:
[SqlException: General network error. Check your network documentation.]
System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream) +721
System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +196
DotNetNuke.AdminDB.UpdatePortalInfo(Int32 PortalId, String PortalName, String PortalAlias, String LogoFile, String FooterText, Int32 UserRegistration, Int32 BannerAdvertising, String Currency, Int32 AdministratorId, String ExpiryDate, Double HostFee, Double HostSpace, String PaymentProcessor, String ProcessorUserId, String ProcessorPassword, String Description, String KeyWords, String BackgroundFile, Int32 SiteLogHistory) in C:DotNetNukeComponentsAdminDB.vb:283
DotNetNuke.SiteSettings.Update_Click(Object sender, EventArgs e) in C:DotNetNukeadminPortalSiteSettings.ascx.vb:287
System.Web.UI.WebControls.LinkButton.OnClick(EventArgs e)
System.Web.UI.WebControls.LinkButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
System.Web.UI.Page.ProcessRequestMain()
--------------------------------------------------------------------------------
Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
Please Help!
Thank you,
dlouanis
I use sqlclient to connect directly from my mobile 5 pocketpc to a sql server 2005 database on my desktop.
I use a sqldatareader to traverse the results of a query that delivers 2 fields: (1) the filespec, and (2) the image field.
I use a filestream with a binary writer to write the contents of the image data to the pocketpc's storage card.
I have a test table with 10 images, not one more than 4 MB. I cannot complete a test run prior to receiving the general network error.
The pocketPC is connected via activesync to the desktop, and I connect to the database with:
Integrated Security=false;
user id=sa
password=admin.
Any help with this strange error would be greatly appreciated.
Wil
Hi I get a "General Network Error Check network documentation" error sometimes, but its only while insert or update statements are fired while selects keep working perfectly.
The Error details are as follows:
General network error. Check your network documentation.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: General network error. Check your network documentation.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException: General network error. Check your network documentation.]
System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream)
Hi,I am getting the following error (When i am trying to update the column thru windows service) Please let me know the solution for the following.The following error is comming only when i set CommandTimeout to infinity (Commandtimeout=0).General network error. Check your network documentation. Number 11 Procedure ConnectionRead (recv()). Class 20 State 0 Source .Net SqlClient Data Provider Server Line number 0 Thanks and Best RegardsNagaraju A
View 2 Replies View RelatedUma writes "Hi Dear,
I have A Table , Which Primary key consists of 6 columns.
total Number of Columns in the table are 16. Now i Want to Convert my Composite Primary key into simple primary key.there are already 2200 records in the table and no referential integrity (foriegn key ) exist.
may i convert Composite Primary key into simple primary key in thr table like this.
Thanks,
Uma"
Hi all,
Can anyone suggest me on Adding primary key to a table which has already a primary key.
Thanks,
Jeyam
Hi all,
What is client network and server network alias in SQL server.
when and why we should use that mean what is the requirement of ALIAS in SQL Server.
Thanks
Hi,
I have recently been looking at a database and wondered if anyone can tell me what the advantages are supporting a unique collumn, which can essentially be seen as the primary key, with an identity seed integer primary key.
For example:
id [unique integer auto incremented primary key - not null],
ClientCode [unique index varchar - not null],
name [varchar null],
surname [varchar null]
isn't it just better to use ClientCode as the primary key straight of because when one references the above table, it can be done easier with the ClientCode since you dont have to do a lookup on the ClientCode everytime.
Regards
Mike
We have a table, which has one clustered index and one non clustered index(primary key). I want to drop the existing clustered index and make the primary key as clustered. Is there any easy way to do that. Will Drop_Existing support on this matter?
View 2 Replies View RelatedHi all
I have the following table
CREATE TABLE [dbo].[property_instance] (
[property_instance_id] [int] IDENTITY (1, 1) NOT NULL ,
[application_id] [int] NOT NULL ,
[owner_id] [nvarchar] (100) NOT NULL ,
[property_id] [int] NOT NULL ,
[owner_type_id] [int] NOT NULL ,
[property_value] [ntext] NOT NULL ,
[date_created] [datetime] NOT NULL ,
[date_modified] [datetime] NULL
)
I have created an 'artificial' primary key, property_instance_id. The 'true' primary key is application_id, owner_id, property_id and owner_type_id
In this specific instance
- property_instance_id will never be a foreign key into another table
- queries will generally use application_id, owner_id, property_id and owner_type_id in the WHERE clause when searching for a particular row
- Once inserted, none of the application_id, owner_id, property_id or owner_type_id columns will ever be modified
I generally like to create artificial primary keys whenever the primary key would otherwise consist of more than 2 columns.
What do people think the advantages and disadvantages of each technique are? Do you recommend I go with the existing model, or should I remove the artificial primary key column and just go with a 4 column primary key for this table?
Thanks Matt
We are developing with SQL 7 Developer Edition and planning to installMSDE with the VB application. We received the following question fromthe IT dept. of our client:"Does your version of SQLServer database work well across a framerelay wide area network?"Should there be any problems regarding speed, etc.?Thanks!Ernie Adsett
View 2 Replies View RelatedHello
I am new to .net and asp.net. On my local network i have our accounting system using sql 2005 and also a have an access database. We need to get this data to our web site sql 2005 database which is not connected to our network. Can somebody advise me on which would be the best and most secure way? Should i use Web Services to communicate between the network and the web server or use some other method like FTP, smtp?
Thanks in advance for any help
as far as i know, i can use these types of network libraries:
•
dbnmpntw - Win32 Named Pipes
•
dbmssocn - Win32 Winsock TCP/IP
•
dbmsspxn - Win32 SPX/IPX
•
dbmsvinn - Win32 Banyan Vines
•
dbmsrpcn - Win32 Multi-Protocol (Windows RPC)
may be someone knows, where i could find comparision and details of each one, when witch to use?
Hi,
Running a stored procedure in query analyser returns data but when running the asp.net page which uses that stored procedure returns an exception which is:
General network error. Check your network documentation
Do you know what the problem could be please?
Thanks
I have problems using SQL Profiler from a Windows2000 client PC to an SQL 7 server which is on a Windows NT machine. I can use profiler o.k. from an NT client (using Named Pipes), but can't seem to get it to work on my Windows2000 PC.
I tried changing the Default Network Library on my PC to use TCP/IP, but it still does not work. The server has a default of Named Pipes.
Can I get the server to use either Named Pipes or TCP/IP depending on whether the client communicating is an NT or Windows2000 PC?
Or is this not the problem? Is there a problem with Windows2000 and Named Pipes?
Hi,
I am trying to restore SQL7 DB from the Network M/C,here is the Procedure i am following
i have backup file on ABCsqlbackup where ABC is M/c Name on the network
from my Server i mapped ABCsqlbackup to the I drive
then from enterprise magager i tried to restore DB and i gave path as I:xyz.bak
for backup device location where xyz.bak is backup file name.
when i tried to restore like this it is giving error "unable to verify backup file location"
and i checked in SQL server logs i found that message like..
"Unable to open Backup Device I:xyz.bak Failed to open.Operating system error,Unknown user name or bad password"
and that Sqlbackup directory is shared and it has full access to everyone.
Can anybody tell me how to restore from the Network, and where i am doing wrong.
Thanks in Advance
Mark
Hi Friend,
Is there any way in SQL Server by which I can locate the names of all the SQL-servers on the network. I was wondering if I can execute some query on Master database to find the above info??? Any clues??
Thanks in advance
Wiz
hello,
i am trying to run a data transformation service from my win 98 machine running the sql7 server client. i keep getting the error 'general network error'
it used to work before but doen't anymore. any ideas?
thanks,
ayan
In the SQL Server Network Utility, I am trying to add a second entry for TCP/IP to listen on a port in addition to the default of 1433. I
keep receiving this error, "A network configuration already existst with the name specified. Please choose another name" How can I make
this happen?
I've had no issues using JET as a linkedserver against SQL7 & 2K when the
MDB is local to the server. But when I attempt to query an MDB on a network
that has been linked (successfully), I get a message stating:
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error.
[OLE/DB provider returned message: The Microsoft JET database engine cannot
opoen the file 'I:DatabasesTestDB.MDB'. It is already opened exclusively
by another user, or you need permission to view its data.]
I know it's not opened exclusively so I assume its a permission thing.
I executed sp_serveroption [JETDB], 'DATA ACCESS', 'TRUE'
and
sp_addlinkedsrvlogin JETDB, FALSE, NULL,NULL
and tried
sp_addlinkedsrvlogin JETDB, 'false', 'sa', 'admin', NULL
Even the OPENROWSET method fails against a network located MDB. The second
I do all these things to a local MDB... Success!
Can SQL Server not use JET databases that are located on a network drive?
Thanks
--
Patrick Logan, MCSD
Senior Technical Development Advisor
McKessonHBOC -- Extended Care Solutions Group
pat.logan@itb.mckhboc.com
Opinions expressed are my own and not necessarily those of McKessonHBOC.
Can anybody enlighten me how SQL Server (7.0 or 2000)to bound itself to Network name and IP in DNS? (My question is about server level Name/IP matching rather than Client Network Utility setting).
Is there any registry in Window level to manage it? Is there any published article about this topic?
Thank you very much
Mary
How do I backup SQL Server databases to disk over my network?
View 4 Replies View RelatedHi everyone,
I have several SQL Server 6.5 machines. I would like to see what network support each server uses and change it if possible through the Enterprise Manager.
Thanks...Binh
Hi everyone,
I want to use TCP/IP network protocol on the server and have my clients using TCP/IP Net library. I have having some problems with this...The server will not register if I only have TCP/IP without Named Pipes using Standard Security in SQL Server. If I have TCP/IP and Named Pipes, the client can't register the server. Can someone explain in detail to me on using TCPIP on the server and client?
Thanks...
i try to create a dump device on a drive remote from the sql server(6.5),using machinenamefolderdump.dat. it creates the dump but when i tried to initial the backup it gives and error system that the device is offline. thanks in advance
View 1 Replies View RelatedHi all,
I've read that the SQL dump can only be done directly into the local server. Is there a way to put directly the dump into another server via the network (not copying it but writing it during the process of backup).
Any help much apreciate.
Thanks