Problem(Unable To Add Data Connection)
Jul 7, 2006
Im having trouble creating a new connection through Visual Studio Web Developer. When I try to add a new connection all it gives me is an error-
Unable to add data connection
The DataConnectionDialog could not be intialized
When I test my page it seems alright going to the localhost but when I try to add a connection it wont let me.
What could be the cause?
And how can I fix this problem?
I want to connect to the sql server on my computer.. I cant because of the error above
View 1 Replies
ADVERTISEMENT
Feb 23, 2008
RE: XML Data source .. Expression? Variable? Connection? Error: unable to read the XML data.
I want my XML Data source to be an expression as i will be looping through a directory of xml files.
I don't see the expression property or the connection property??
I tried setting the XMLData property to @[User::filename], but that results in:
Information: 0x40043006 at Load XML Files, DTS.Pipeline: Prepare for Execute phase is beginning.
Error: 0xC02090D0 at Load XML Files, XML Source [108]: The component "XML Source" (108) was unable to read the XML data.
Error: 0xC0047019 at Load XML Files, DTS.Pipeline: component "XML Source" (108) failed the prepare phase and returned error code 0xC02090D0.
Information: 0x4004300B at Load XML Files, DTS.Pipeline: "component "OLE DB Destination" (341)" wrote 0 rows.
Task failed: Load XML Files
Information: 0xC002F30E at Bad, File System Task: File or directory "d:jcpxmlLoadjcp2.xml.bad" was deleted.
Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package.dtsx" finished: Failure.
The program '[3312] Package.dtsx: DTS' has exited with code 0 (0x0).
Thanks for any help or information.
View 3 Replies
View Related
Apr 15, 2015
I use SQL Server 2012 and visual studio 2010.I created SSIS Project with task "Execute Package". Control flow view as: Package1 (execute package) -> Package2 (data flow).Data flow in Package2 view as: ADO.NET source -> ADO.NET destination.
When I started Package2, it's work. I havn't errors.But when I started Package 1 I have error "Unable to get managed connection from the Connection Manager runtime". In execution log I see that ADO.NET source produced this error on verification stage. Package failed on verification stage, not on execution stage.Why when I started Package 2 it work, but when I started Package1 (and Package1 started Package2) it failed?
View 14 Replies
View Related
Sep 25, 2007
Server Error in '/Dive' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
this is the error message I found when I run my asp.net application and the connection string as follows:
<add key="ConnectionInfo" value="Server=(local);Database=Dive;Trusted_Connection=yes;" />
can someone tell me how to connect and how to specify username and password in Visual Web Developer 2005 Express Edition..........
I'm a little bit new on VWD 2005 I need an assistance on it.
View 4 Replies
View Related
Mar 18, 2008
I have app.config<connectionStrings>
<add
name="OrganizationConnectionString" connectionString="Data
Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|inDebugDatabaseOrganization.mdf;Integrated
Security=True;Connect Timeout=30;User Instance=True" providerName="System.Data.SqlClient"/></connectionStrings>Code behind:
string ConnString
= ConfigurationManager.ConnectionStrings["OrganizationConnectionString"].ConnectionString; I am getting "ConnString" value null. How handle this?
View 4 Replies
View Related
Apr 7, 2000
Here are the error messages:
Enterprise Manager:
A connection could not be established to SERVERNAME - Client unable
to establish connection ConnectionOpen (CreateFile())
Query Analyzer:
Unable to connect to server ServerName
Server Msg 67, Level 16, State 1
[Microsoft][ODBC SQL Server Driver]Client unable to establish connection
I can't register any other new servers, even ones in my workgroup. I'm connecting using named pipes, but have also tried using TCP/IP setting it up using Client Network Utility.
When i log on to another machine using my network login - I can connect.
There have been no problems connecting in the past and I haven't changed anything on my machine - any ideas???
View 1 Replies
View Related
Oct 18, 2000
Hi Guys.
We have a clustered server. When i create DTS packages in the secondary server I can get all the connection. But when i create DTS package that has connection to other servers. I am getting the follwing error. So my jobs that runs the DTS packages are failing.
Error Source: Microsoft OLE DB Provider for sql server
Error Description: Client Unable to establish connection.
Connectionopen(createfile())
I deleted all the entries in the Client network utility and recreated with ip addresses and TCP/IP protocol.
Added all the ip addresses to Lmhosts and host files.
Check the Server Network Utility.
I dont have a clue now.
Anyhelp are well appreciated.
-Thanks
-MAK
View 4 Replies
View Related
May 5, 2012
I am not able to connect to SQL Database server using windows authentication when I am connected through VPN connection.However I am able to connect to same server using SQL server authentication and also able to do RDP to DB server machine.
I found a resolution in one of the forum suggesting to change UserRasCredentials to 0 value in *.pdk file.Since VPN connection which I am using generates instant proxy this resolution doesn't work.
Also application which I am using does windows authentication connection it is required for me to impersonate windows authetication when connected using VPN.
View 3 Replies
View Related
Aug 7, 2007
Hello everybody,
I'm a SSiS newbie and I'm trying to reproduce my old DTS from sql server 2000 into this new SSiS.
I need to retrieve data through ODBC from a SAP db. I've got the right DNS and it works (Test connection succesful), but I'm unable to store password in connection manager.
I tryied to foigure out why and how to solve this problem, and I found somehthing on this forum talking about changing configuration files or something else... I'm a newbie, I don't know which files you're talking about..
Can you explain me in the simplest way possible how to store password in connection manager?
thanks in advance
View 1 Replies
View Related
Oct 15, 2007
All,
I was wondering if anyone could tell me why I could not connect to my server with the DAC when the server CPU utilization for all CPU's was greater than 90%.
BACKGROUND: I have successfully established DAC connections to this server in other periods when the CPU utilization was not pinned so high. I have done so by RDP'ing into the server, opening SSMS and cancelling the request to connect Object Explorer. Finally, I start a new query adding the "Admin" prefix to my server.
As I mentioned, when the server has CPU resource available, this works fine. This indicates that all the groundwork to setting up and using the DAC is laid correctly (i.e. DAC is enabled, I am connected locally, I am logged in with a user role with proper permissions, etc.).
This leads to my question. Why can I not connect to SQL Server 2005 Standard Edition using the DAC when all the (8-way) CPU utilization is at 90% or higher?
I need to make this connection to analyze why the server is so busy.
Any help will be greatly appreciated!!
Thanks,
Tom
View 14 Replies
View Related
May 28, 2007
Hi,
I get the follwowing error message when i click on sync on my PDA.
"Failure to open SQL Server with given connection string.[connectString = Datasource=DSP-WS-194SQLEXPRESS;Initial Catalog=EMS;Integrated Security = True]; Multiple-step OLE DB Operation generated errors. Check each OLE DB status value if available. No work was done."
I am trying to use RDA to synchronize my server database (SQL Server Express) and client database (SQL Compact Edition) on my PDA. I am also using the sqlcesa30.dll for my internet URL.
I hope someone can help me out here. Thanks
View 4 Replies
View Related
Jun 19, 2008
Hi, I am using Microsoft Visual Web Developer 2008 Express Edition. I wanted to add a database to the Project. When i add it, it says "An error occured while extablishing an connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQl Server does not allow remote connections. (provider: SQL Network Interfaces, error:26- Error locating server / instance specified). Please let me know what is the cause of this error. Initially i downloaded Microsoft Adventure works database and saved the file as .mdf and tried to access it through the data grid. I got the same error message as above. I changed the settings in SQl server to enable remote access and also changed firewall settings to allow SQL server exe files. Then i uninstalled works db and now have disabled remote access and still have the firewall settings to allow SQL server on. Thanks,Vidhya
View 2 Replies
View Related
Mar 14, 2008
hi,
I created ReportServer by reporting services configuration and i gave the local and remote permissions using surface
area cofiguration using tcp/ip only. But when i browse the reportserver i got the below mentioned error.
The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing. (rsReportServerDatabaseUnavailable)
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
View 5 Replies
View Related
Sep 26, 2015
I've created a simple cube following the below link, but when I try to deploy the cube I am getting the below error.
[URL]
I tried to connect from SSMS to analysis service, (Connect - > Analysis Services ) I am still getting the below error. I saw the SQL browser is running.
One more strange thing I noticed is, in the services I do not see the Analysis Services ( Screen attached below)....
View 5 Replies
View Related
Oct 19, 2007
Hi,
I'm trying to deploy a Report Model to my local machine that contains an ODBC connection to an iSeries Access ODBC Driver. The system DSN is already setup on my PC, named exactly the same. The data set views and report models create and build succesfully but when I try to deploy using BIDS I get an error description "System.Data.Odbc" for the dataset file and the model.
I can't really see anything substantial in the log files, although not sure what one I should be looking in.
Any help gratefully received
Paul
View 1 Replies
View Related
Oct 28, 2015
I unable to setup a linked server on sql server 2012. The destination server is on sql server 7.0. I can able to setup the same linked server on sql 2005 sp4 and sql 2008 r2 but unable to setup on 2012. I am getting the below error message. OLE DB provider "SQLNCLI11" for linked server "" returned message "Client unable to establish connection due to prelogin failure".
Msg 10054, Level 16, State 1, Line 0
TCP Provider: An existing connection was forcibly closed by the remote host.
OLE DB provider "SQLNCLI11" for linked server "" returned message "Client unable to establish connection".
Msg 26, Level 16, State 1, Line 0
Client unable to establish connection because an error was encountered during handshakes before login. Common causes include client attempting to connect to an unsupported version of SQL Server, server too busy to accept new connections or a resource limitation (memory or maximum allowed connections) on the server.
View 2 Replies
View Related
Oct 28, 2015
I unable to setup a linked server on sql server 2012. The destination server is on sql server 7.0. I can able to setup the same linked server on sql 2005 sp4 and sql 2008 r2 but unable to setup on 2012. I am getting the below error message. OLE DB provider "SQLNCLI11" for linked server "" returned message "Client unable to establish connection due to prelogin failure".
View 3 Replies
View Related
Jan 23, 2007
Hi all,
i am trying to consume an webservice which under secure layer (HTTPS)
eg: https://test.com/test.asmx
i'm connected thro' a proxy server.
when i use the same url in IE it works fine, but when i connect thro' http connection manager it always throws me a error saying "unable to connect to remote server "
can anyone provide me solution to over come this problem
View 1 Replies
View Related
Apr 13, 2006
Hello,
We are running SQL2K5 and have a Web server with a family of sites all sharing an identical connection string to enable ADO connection pooling between them. Today for about 20 minutes we had several (all?) connections from one site that uses a specific DB get a connection reuse error which showed in out SQL logs:
DESCRIPTION: The client was unable to reuse a session with SPID #, which had been reset for conection pooling. This error may have been caused by an earlier operation failing. Check the error logs for failed operations immediately before this error message.
We also have SQL Server slowdown and log in problems from other applications that seemed a symptom of this, or some third unknown cause. Note, the # means the run-time spid number was inserted. The misspelling "conection" comes right out of sys.messages (it is not our custom error):
select top 10 * from sys.messages where message_id = 18056
The immediately preceeding error in the SQL Log was always:
Message
Error: 18056, Severity: 20, State: 29.
Where Severity and State vary, but "Error: 18056" is consistent, although I can find no documentation on "Error: 18056" through Google or MSDN.
Also, the "The client was unable to reuse a session ..." error seems not to be referred to anywhere.
In our IIS logs, the matching entries are of the form:
[DBNETLIB][ConnectionRead (recv()).]General network error. Check your network documentation.
and
Invalid connection string attribute
My questions: Does anyone have experience with this error? We have real good history with ADO connection pooling, but can a "bad" connection be pooled, and if so can it be "flushed" or the pool "drained"?
Thank you for anything you have to offer!
View 13 Replies
View Related
Sep 18, 2015
I am new to MSBI, I am unable to create parameter using OLEDB ....
I am using Report Builder 3.0 and using this report tool I am executing below query, while I am running this query it display below error message.
Query: SELECT * FROM EMP WHERE EMPID =@EID
I need to pass @EID as parameter.
Error msg: (run the above query disp error msg)
Column or global variable *N not found. SQLSTATE:42703, SQLCODE:-206(Microsoft DB2 OLE DB Provider)
View 9 Replies
View Related
Feb 20, 2008
I am setting up a web server and I'm having some issues with database connections. I am running Windows Server 2k3 and SQL Server 2005. The error I get is when I attempt to connect to the database, it's the following:
Cannot open database "dbReseacher" requested by the login. The login failed. Login failed for user 'userRes'.
The following is my connection string:
<add name="RESEARCHER" connectionString="Data Source={Sql Server}; Server=THRALL2; Database=dbReseacher; Uid=userRes; Pwd=password;"/>
In SQL Server Management Studio, the user userRes is listed under Security -> Logins, but it is not listed under Database -> dbResearcher -> Security -> Users. Originally it was listed under both and this didn't solve the problem.
Please let me know if you any ideas or questions that I can answer. Thanks a lot.
-Richard
View 1 Replies
View Related
Feb 15, 2006
Hi all,
When I try to open a connection it gives me error "Stored Procedure sp_sdidebug not found"
Can anyone help me in this respect?
I was running the same application with the SQL Server 2005 only earlier when it was running.But now after I reinstalled VS.NET & SQL Server I am getting this error.What could be the problem?
Please help... I am badly stuck up.
PAM
View 3 Replies
View Related
Aug 3, 2006
Hi All,
I have downloaded Microsoft Enterprise Library 2005 from microsoft.com. I am trying implement Data Access Layer with visual studio 2003. I am able to access some functions of the DAL but I am not able to establish connection with SQL Server 2000.
Will anyone tell me the solution for the above issue.
Thanks & Regards,
Bijay
View 4 Replies
View Related
Oct 15, 2007
I am getting an error in Replication between SQL Server 2005 and SQL Express when "Connecting to Subscriber". Detailed error message is given below. Do we need to increase the logintimeout for "Connecting to Subscriber". How can we increase it?
Message
2007-10-15 06:37:58.398 Startup Delay: 8503 (msecs)
2007-10-15 06:38:06.898 Connecting to Distributor 'ACR-MANGO'
2007-10-15 06:38:06.976 Initializing
2007-10-15 06:38:06.976 Parameter values obtained from agent profile:
-bcpbatchsize 2147473647
-commitbatchsize 100
-commitbatchthreshold 1000
-historyverboselevel 1
-keepalivemessageinterval 300
-logintimeout 15
-maxbcpthreads 1
-maxdeliveredtransactions 0
-pollinginterval 5000
-querytimeout 1800
-skiperrors
-transactionsperhistory 100
2007-10-15 06:38:06.991 Connecting to Subscriber 'ACR-ANJILISQLEXPRESS'
2007-10-15 06:38:46.133 Agent message code 20084. The process could not connect to Subscriber 'ACR-ANJILISQLEXPRESS'.
2007-10-15 06:38:46.148 Category:NULL
Source: Microsoft SQL Native Client
Number: 08001
Message: Unable to complete login process due to delay in opening server connection
2007-10-15 06:38:46.148 The agent failed with a 'Retry' status. Try to run the agent at a later time.
View 1 Replies
View Related
Jan 11, 2007
Hello, I am getting very frustrated! I have got a Foreach loop container which I am processing files within a folder. I have a flatfile connection manager which I have set up using a test file and have updated the expressions attribute to be the package variable I set up in the collection for the loop container however everytime I run it I get the error: 0xC0202094 cannot retrieve the column information from the flatfile connection manager. I can only guess that it is either the variable being passed to the connection manager or the way I set up the connection manager. When I msgbox the variable in a script component before the dataflow step, the variable for the file seems fine. Any suggestions are REALLY appreciated.
Yours
Jayne
View 2 Replies
View Related
May 22, 2015
I have an expression based project connection manager in an existing package and updating Packet Size parameter.
After update and clicking on OK, Packet Size value reverts back to 0 (which is old value). This connection manager is used by lot of Dataflow tasks in my package and recreating the connection manager and updating the reference is not a viable option.
View 2 Replies
View Related
Apr 11, 2007
I'm trying to figure this out
I have a store procedure that return the userId if a user exists in my table, return 0 otherwise
------------------------------------------------------------------------
Create Procedure spUpdatePasswordByUserId
@userName varchar(20),
@password varchar(20)
AS
Begin
Declare @userId int
Select @userId = (Select userId from userInfo Where userName = @userName and password = @password)
if (@userId > 0)
return @userId
else
return 0
------------------------------------------------------------------
I create a function called UpdatePasswordByUserId in my dataset with the above stored procedure that returns a scalar value. When I preview the data from the table adapter in my dataset, it spits out the right value.
But when I call this UpdatepasswordByUserId from an asp.net page, it returns null/blank/0
passport.UserInfoTableAdapters oUserInfo = new UserInfoTableAdapters();
Response.Write("userId: " + oUserInfo.UpdatePasswordByUserId(txtUserName.text, txtPassword.text) );
Do you guys have any idea why?
View 6 Replies
View Related
Nov 23, 2006
Hi,
I currently have SQL2005 Std, using 2 separate domain accounts for both SQL server and SQL agent. When accessing the MSDB stored packages folder from mgmt studio, I get the following error:
Client unable to establish connection.
Encryption not supported on SQL server.
I did google for this error, but have tried all suggestions, including updating the MsDtsSvr.ini.xml file with the servername. I am using a default instance.
Also, I am only able to access the MSDB folder if I set the SQL service account to the local admin account. I have also set the SQL service account to be part of the local admins group, but without any luck.
TIA.
View 1 Replies
View Related
Jul 15, 2015
I've developed a package that is working well at development machine from VS 2013 for a sample flat file. Also, over development machine, I've deployed it to SSISDB catalogue and even from there also it is running well for the same file.When the same package is deployed to production server's SSISDB catalogue database, it throws following error while processing the same sample flat file, “Unable to retrieve column information from the flat file connection manager”
View 5 Replies
View Related
Jun 28, 2012
I have a sql server 2008 backend with an Access 2007 frontend database. Each time I export a query I get the following error:
Code:
Microsoft Access was unable to append all the data to the table.
The contents of fields in 0 record(s) were deleted, and 1 record(s) were lost due to key violations.
*If data was deleted, the data you pasted or imported doesn't match the field data types or the FieldSize property in the destination table.
*If records were lost, either the records you pasted contain primary key values that already exist in the destination table, or they violate referential integrity rules for a relationship defined between tables. Do you want to proceed anyway?
I don't know what if anything is actually missing because of the amount of data is more thant 6000 records. It seems everything exported but I would have to comb through the data to be sure.
View 3 Replies
View Related
Sep 16, 2015
I am using sqljdbc41.jar to connect with MSSQL database, it is working fine on my local machine.Where as on the remote server, same class giving me error
Login failed for user '<domain><windows loginID>'
My connection string is URL...
I am using sqljdbc41.jar and on 64 bit processor , I am using following command which included path for sqljdbc_auth.dll java -Djava.library.path= C: sqljdbc_4.1enuauthx64 TestDao and error is Login failed for user '<domain><windows loginID>' why it is not picking up username passed in connection string. I have 2 machines, one is local and other is remote. on both machine I login using my domain, it is working absolutely fine on local then why the error is coming on remote machine.Both the machines are identical.
View 4 Replies
View Related
Mar 30, 2007
Hello,
I've created a SSIS Solution and have created Data Sources. I have two packages. One was created before the Data Sources, and one was created after. The package that was created after is using connections from the Data Sources. I want to change the package before the Data Soruces were created to use them, but when I right click in the Connection Managers pane "New Connection From Data Source.." is not an option.
Did I not add it to the Solution properly?
How do I get it to show?
Did I not refresh something?
Please provide the how if you figure it out.
Thanks
View 4 Replies
View Related
Jun 1, 2015
I am using SSIS 2014 with the below .net framework version and installed in Windows server 2012 R2 . I have installed my client's odbc drivers (both 32 bit and 64 bit) in my production server and created ODBC system DSNs for 32 bit and 64 bit.
When i open SSIS 2014 and tried to create the odbc connection but i can able to see only the 32 bit system DSN connection ,i can't able to see my 64 bit odbc system dsn connection.
Microsoft Visual Studio 2012 Shell (Integrated)
Version 11.0.50727.1 RTMREL
Microsoft .NET Framework
Version 4.5.51650
SQL Server Integration Services
Microsoft SQL Server Integration Services Designer
Version 12.0.1524.0
And i installed my client odbc drivers(32,64 bit) and created ODBC system DSNs in my local system and when i open ssis 2014 and i can able to see both the ODBC system DSNS(32,64) connections from SSIS ODBC connection.
I am using below version of .net framework in my local system which was installed in windows 7 and i have SSIS 2012 also installed in my system and i can able to see both ODBC connections using 2012 as well in my local system.
Microsoft Visual Studio 2012 Shell (Integrated)
Version 11.0.50727.1 RTMREL
Microsoft .NET Framework
Version 4.5.50938
SQL Server Integration Services
Microsoft SQL Server Integration Services Designer
Version 12.0.1524.0
why i can not see the ODBC 64 bit system DSN connection from SSIS in my production server ?
View 9 Replies
View Related
