Problem After Installing Sqlserver 6.5 Sp5a
Dec 16, 1999
we have a client that just upgraded to sp5a and are encountering problems...one stored procedure seems to routinely become corrupted, and does not complete correctly. however, it does not error out, and the only way to tell that it did not complete successfully it to query the data.
the only solution that i have found to this problem is to recreate the procedure. i have tried using sp_recompile to force a recompile at next runtime, and the problem still occurs. i have tried recreating the calling procedure, and recreating procedures it calls, but neither fix the problem.
after recreating the procedure, it continues to run fine for anywhere from 1 hour to 8 hours, and then starts to fail again.
microsoft so far has not been able to give us help in diagnosing this, and i am coming up with nothing in my own investigations.
has anyone seen a problem like this in sp5a?
also, it is occurring on 5 similar dbs that are on the same server...
thanks
carl
View 2 Replies
ADVERTISEMENT
Jul 28, 1999
While installing the service pack 5a, I had the following error
"setup could not be successfully completed,
ISQL.EXE could not be executed. Please check the relevant *.Out file.
Now I am unable to start up my SQL service. When I try to start it , I get the following message:
Error : 1105, Severity: 17, State: 2
Can't allocate space for object 'Syslogs' in database 'master' because the 'logsegment' segment is full. If you ran out of space in Syslogs, dump the transaction log. Otherwise, use ALTER DATABASE or sp_extendsegment to increase the size of the segment.
Apparently 4 mb of free space in my master database was not enough for the service pack. I can't extend the size of my Master database because I can't get the SQL service to start.
Any suggestions?
LH
View 1 Replies
View Related
Jul 19, 2000
I am having problems with stack dumps (as many as 12 a day) at a production site running NT 4.0 SP4 with Sql Server 6.5 SP5A. I've tried running every diagnostic utility on the server but it shows no problems. Before I open a ticket with Microsoft on the stack dumps, I'd like to upgrade the server to NT Service Pack 6A. My question is, do I need to re-install SqlServer SP5A? Will the NT Service Pack 6A invalidate SQL SP5A?
TIA,
Mike
View 2 Replies
View Related
Aug 4, 1999
Hi
I've recently upgraded 4 sql servers to sp5a and have just found that BCP fails on all of them with a DR Watson error. I did reinstall the Nt sp after installing sql server sp5a.
Can anyone help ?
Thanks
View 2 Replies
View Related
Sep 28, 1999
HI, I am having difficulties in installing sp1 for sql server 7.0. Does anyone have similar issues. Any one can enligth me with his/her experience. thanks for your help
Ali
View 2 Replies
View Related
Jul 23, 2005
I'm updating my local database installation using my netowrk login asthe id under which SQLServer is being update (Administrator on theoperating system and SA role on the database server itself).Has anyone encountered any problems and what is the work-around?
View 1 Replies
View Related
Jan 29, 2007
Hi All
I would like to know whether SQLServer can be installed in a raw volume or not..... Is there best practice guide for this. .
Regards,
Vijay
View 2 Replies
View Related
May 25, 2007
After installing Visual Studio 2005 everything has installed fine EXCEPT SQLSERVER 2005. I remember having had the same problem some moths ago, but can't remember now how to fix it. I deinstalled VS2005 and installed back again, but the result was the same. SQLSERVER failed to install
thanks
View 4 Replies
View Related
Feb 23, 2005
Hello Friends at dBForum !!
:confused: I have a strange problem, and I need to know what would be the source of this. I have a laptop computer with the following configuration:
Pentium III
Brand :Toshiba
Speed: 500 Mhz
RAM : 192 MB
Hard Disk :6 GB
Space Available:4 GB
O.S.:Windows 98
The computer works pretty good and run different applications. I was trying to install MS-SQLSERVER 2000 and I checked out the software and hardware requierements for that and everything seems to be fine. The reason that I need it its because of my trips, and its incredible I have a desktop computer with almost the same configuration and runs pretty good.
When you have a problem installing SQL-SERVER 2000 you have a file called cnfgsvr with all the explanation. I got this at hand so you can see better the problem:
Iniciando servicio ...
Conectando con el servidor ...
driver={sql server};server=3110CT;UID=sa;PWD=;database=master
[Microsoft][ODBC SQL Server Driver][Shared Memory]No existe el servidor SQL Server o se ha denegado el acceso al mismo.
[Microsoft][ODBC SQL Server Driver][Shared Memory]ConnectionOpen (Connect()).
driver={sql server};server=3110CT;UID=sa;PWD=;database=master
[Microsoft][ODBC SQL Server Driver][Shared Memory]No existe el servidor SQL Server o se ha denegado el acceso al mismo.
[Microsoft][ODBC SQL Server Driver][Shared Memory]ConnectionOpen (Connect()).
driver={sql server};server=.;UID=sa;PWD=;database=master
[Microsoft][ODBC SQL Server Driver][Named Pipes]No existe el servidor SQL Server o se ha denegado el acceso al mismo.
[Microsoft][ODBC SQL Server Driver][Named Pipes]ConnectionOpen (Connect()).
Error de configuración del servidor SQL Server.
This is what I got after the installation fails: Here is the log sequence, and I got this from a file called sqlstp2000:
14:37:28 CoreCOM
14:37:28 CoreCOMRes1033
14:37:28 CoreCOMResIntl
14:37:28 CoreTool
14:37:28 CoreToolRes1033
14:37:28 CoreToolResOther
14:37:28 DBLibCli
14:37:28 SFExt
14:37:28 SFExtActiveX
14:37:28 SFExtActiveXRes1033
14:37:28 SFExtActiveXResIntl
14:37:28 SFExtRes1033
14:37:28 SFExtResIntl
14:37:28 Trace
14:37:28 TraceRes1033
14:37:28 TraceResOther
14:37:28 MiscCore
14:37:28 MC
14:37:28 MCMC1033
14:37:28 MCMCIntl
14:37:28 MCHelp
14:37:28 SQLMgr
14:37:28 SQLMgrRes1033
14:37:28 SQLMgrResIntl
14:37:28 SvrTool
14:37:28 SvrToolRes1033
14:37:28 SvrToolResIntl
14:37:28 DTSUI
14:37:28 DTSUIRes1033
14:37:28 DTSUIResIntl
14:37:28 MSOlap
14:37:28 MSOlapRes1033
14:37:28 MSOlapResIntl
14:37:28 ATL
14:37:28 ATLwinnt
14:37:28 ATLwin9x
14:37:28 MFC42U
14:37:28 VC
14:37:28 VB
14:37:28 SQLAdHlp
14:37:28 SQLAdHlpRes1033
14:37:28 SQLAdHlpResOther
14:37:28 {E07FDDC8-5A21-11d2-9DAD-00C04F79D434}
14:37:28 {E07FDDBE-5A21-11d2-9DAD-00C04F79D434}
14:37:28 {E07FDDC7-5A21-11d2-9DAD-00C04F79D434}
14:37:28 {E07FDDC0-5A21-11d2-9DAD-00C04F79D434}
14:37:28 {E07FDDBF-5A21-11d2-9DAD-00C04F79D434}
14:37:28 End Action LogSelectedComponents
14:37:28 Begin Action InstallPkgs:
14:37:28 Begin Action: Locked Connectivity Files Check
14:37:29 ConnectivityLocked returned: 0
14:37:29 The operation completed successfully.
14:37:29 End Action: Locked Connectivity Files Check
14:37:29 El programa de instalación está instalando Microsoft Data Access Components (MDAC)...
14:37:29 E:X86Othersqlredis.exe /q:a /C:"setupre.exe WARN=1 -s -SMS"
14:38:10 ExitCode: 0
14:38:10 El programa de instalación está instalando Microsoft Management Console (MMC) ...
14:38:10 E:X86Otherinstmmc.exe /Q
14:38:36 Process Exit Code: (0)
14:38:36 Se está instalando el Coordinador de transacciones distribuidas de Microsoft (MSDTC)...
14:38:36 E:X86Otherdtcsetup.exe /q:a /r:n
14:38:53 Process Exit Code: (0)
14:38:53 /Q:A /T:C:WINDOWSTEMPixp001.tmp
14:38:53 El programa de instalación está instalando la Ayuda HTML...
14:38:55 HTML Help installer exit code: 0
14:39:18 End Action InstallPkgs
14:39:18 Begin Action MoveFileData:
14:39:18 Enabled SELFREGISTERBATCH
14:39:18 Enabled CORECOMPONENTHANDLING
14:42:27 ComponentMoveData exit code: -117
14:42:27 ComponentMoveData: -117
14:42:51 No se puede leer el archivo especificado. Puede ser a causa de una conexión de red de bajo rendimiento. Corrija el problema y reinicie el programa de instalación. ( This message says that the computer can not read the specified file or its a problem related to a network connection of low performance. According to the message here shown, I have to fix the problem and reinstall. ) I did it, even I deleted the entries related to this on the windows registry and after restarting the problem stills...
Archivo: E:X86SETUP....Install
eplmerg.sql
14:42:51 Begin Action: MoveFileDataSpecial
14:42:52 End Action: MoveFileDataSpecial
14:42:52 Action CleanUpInstall:
14:42:52 StatsGenerate returned: 2
14:42:52 StatsGenerate (0x0,0x1,0xf0000,0x0,1034,303,0x0,0x1,0,0,0
14:42:52 StatsGenerate -1,Alessandro)
14:42:52 Installation Failed.
On the other hand, I tried to install MS-SQLSERVER 7.0 ( you know if I can get do it with MS-SQLSERVER 2000 ) and this is what I got :
2005-02-17 13:08:26.77 kernel Microsoft SQL Server 7.00 - 7.00.623 (Intel X86)
Nov 27 1998 22:20:07
Copyright (c) 1988-1998 Microsoft Corporation
Desktop Edition on Windows 4.10 (Build 2222: A )
2005-02-17 13:08:26.84 kernel Copyright 1987-1998 Microsoft Corporation.
2005-02-17 13:08:26.84 kernel Reservados todos los derechos.
2005-02-17 13:08:26.84 kernel Registrando los mensajes de SQL Server en el archivo 'C:MSSQL7logERRORLOG'.
2005-02-17 13:08:27.00 kernel initconfig: número de conexiones de usuario limitado a 32767.
2005-02-17 13:08:27.01 kernel SQL Server se iniciará con clase de prioridad 'normal'( se detectó 1 CPU).
2005-02-17 13:08:27.21 kernel User Mode Scheduler configured for thread processing
2005-02-17 13:08:28.61 server Directory Size: 8087
2005-02-17 13:08:28.68 spid1 Using dynamic lock allocation. [500] Lock Blocks, [1000] Lock Owner Blocks
2005-02-17 13:08:28.74 spid1 failed to get sqlservr image range
2005-02-17 13:08:28.78 spid1 Advertencia ******************
2005-02-17 13:08:28.79 spid1 SQL Server iniciado en modo de usuario único. Se permiten las actualizaciones en los catálogos del sistema.
2005-02-17 13:08:28.79 spid1 Advertencia ******************
2005-02-17 13:08:28.79 spid1 Recovering only master database
2005-02-17 13:08:28.85 spid1 Iniciando la base de datos 'master'.
2005-02-17 13:08:28.85 spid1 Opening file C:MSSQL7datamaster.mdf.
2005-02-17 13:08:28.97 spid1 Opening file C:MSSQL7datamastlog.ldf.
2005-02-17 13:08:29.06 spid1 Cargando el método de intercalación Unicode de SQL Server.
2005-02-17 13:08:29.16 spid1 Cargando el orden y conjunto de caracteres no Unicode de SQL Server.
2005-02-17 13:08:29.41 spid1 4 transacciones confirmadas en la base de datos 'master' (1).
2005-02-17 13:08:29.41 spid1 0 transacciones deshechas en la base de datos 'master' (1).
2005-02-17 13:08:29.65 spid1 El servidor no tiene nombre.
2005-02-17 13:08:29.65 kernel Se utiliza 'SQLEVN70.DLL' versión '7.00.623'.
2005-02-17 13:08:29.72 kernel Se utiliza 'OPENDS60.DLL' versión '7.00.00.0623'.
2005-02-17 13:08:29.83 ods Utilizando 'SSMSSH70.DLL' versión '7.0.623' para escuchar en ''.
2005-02-17 13:08:29.89 ods Utilizando 'SSMSSO70.DLL' versión '7.0.623' para escuchar en '1433'.
2005-02-17 13:08:30.09 ods Utilizando 'SSMSRP70.DLL' versión '7.0.623' para escuchar en '3110CT'.
2005-02-17 13:08:31.11 spid1 El método de intercalación Unicode de SQL Server es:
2005-02-17 13:08:31.11 spid1 'English' (Id. = 1033).
2005-02-17 13:08:31.11 spid1 estilo de comparación = 196609.
2005-02-17 13:08:31.11 spid1 El orden no Unicode de SQL Server es:
2005-02-17 13:08:31.11 spid1 'nocase_iso' (Id. = 52).
2005-02-17 13:08:31.11 spid1 El juego de caracteres no Unicode de SQL Server es:
2005-02-17 13:08:31.11 spid1 'iso_1' (Id. = 1).
2005-02-17 13:08:31.19 kernel Warning: override, autoexec procedures skipped.
2005-02-17 13:10:23.67 kernel SQL Server terminará debido a una petición de 'detención' del Administrador de control de servicios.
Accordiing to the message shown in the bottom line, we may see its like the installation were stopped because of a request of the Control Service Manager. I never stop the installation or something like that but I dont have a clue why or where is the problem here.
My desktop computer is standalone and works without problems. Of course I read that if you have PWS ( Personal Web Server ) running you may need to stop that first, and then proceed. I did it and it never worked.
If you have any suggestion about it, this would be greatly appreciated.
Thank you so much,
Cordially,
Alessandro Barbieri - Peru
View 2 Replies
View Related
Aug 30, 2005
Hi,I am planning to install sql server 2000 sp4 on my clustered serverrunning in active/passive mode.I plan to stop all sql services using cluster administrator, installthe service pack from the primary node and then reboot all nodes.Are there any missing steps that need to be done or problems thatanyone has come across?ThankLyn
View 3 Replies
View Related
Jul 20, 2005
Hello!When trying to install SqlServer 2000 Developer (as Administrator) on myWindows XP Professional I get the following message at the point wherethe system asks Local Account or Domain account:The logon account cannot be validated for the SQL server service. Verifythat the user name and password entered are correct. The logon attemptfailed.Anyone an idea what goes wrong here?Thanks for your info.Daniel*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies
View Related
Nov 15, 2007
Hello,
I am totally confused by what account I should be running my sql server database and my business layer service as.
I take it that when installing sqlserver and my service that I should be logged in as administrator.
Should I be using "Local Service", "Local System" or "Network Service" to run these processes as?
Summary of my business layer service
* Clients connect to this service on a tcp/ip port
* It accesses the file system
* it connects to the database
Thanks,
JP
View 4 Replies
View Related
Apr 11, 2000
Got the following message while trying to apply sp5a:
"Setup initialization could not be successfully completed.
ISQL.EXE could not be executed. Please check the relevant .OUT file."
And yes, i did check the readme file, but found no problem in the PATH variable.
(unless I'm looking at it wrong!)
Please help!
View 2 Replies
View Related
Feb 9, 1999
I am trying to apply SQL Server Service Pack 5a to my original SQL
Server 6.5 but an error keeps coming up "Setup initialization could not
be successfully executed. ISQL,EXE could not be executed.Pls check
relevant .out file".
The last line of the relevant .out file produced by this error is:
You cannot run SELECT INTO this database. The DBO would have to run
sp_dboption to enable this option.
Msg 208, Level 16, State 1, Server REYWINNT, Procedure sp_helpsort, Line
295
I would appreciate any help to solve my problem
Thanks a lot
Rey Caunca
View 2 Replies
View Related
Mar 10, 1999
I have a third party app that has been 'certified' by the vendor on SQL 6.5 SP5. We are aware of the dump database issues when using SP5 and Enterprise Manager. We would like to use SP5a to get around those issues.
Is anyone aware of any other 'bugs' or problems that have come about in SP5a....
Thanks tons!
Dean
View 1 Replies
View Related
Jun 28, 1999
Is there a proper order to installing SQL SP5a. Should you reinstall NT SP4 after you install
the SQL SP5a?
View 1 Replies
View Related
Jan 13, 2000
I've got a script that runs regularly to monitor log space usage on a SQL 6.5 sp5a server. Where the log space usage is greater than 75% it then dumps the log. However the Enterprise Manager screen still shows usage as being above 75%. I'm aware that I need to run dbcc checktable(syslogs) to have EM reflect the change, and my question is:
Within my sql script how do I switch context to the database where I need to run the dbcc checktable(syslogs) command?
View 4 Replies
View Related
Sep 10, 1999
I currently have SP5 in a folder on the server desktop. MSSQL Server is installed on drive E:
Running setup, it finds SQL Server and shuts it down. It then returns errors about not being able to find files, though the files are actually there.
I appologize for the brain-cramps, as I know this has been discussed before, but I need HELP ASAP.
Thanks
Steve Jimmo
View 1 Replies
View Related
Jun 17, 1999
I run replication among several SQL 6.5 Servers with SP3. Recently,
I've applied SP5a to publisher/distributor. After that, some publications
continued to replicate normally, but two of them started to act strangely -
the distribution tasks end succesfully, but it seems that no transactions
were marked for replication.
After investigating a bit, I've found that the data that continued to
replicate normally is modified by stored procedures, while problematic
tables are updated directly. Then I've tried to run isql/w updates against
problematic tables - all the changes were succesfully applied to the
subscribers. The other difference between problematic and non-problematic
tables is their size - problematic tables are much bigger and more
frequently updated.
All the subscribers are still SQL 6.5 Servers with SP3. One of them
is also a publisher that uses SP5a-upgraded SQL Server as remote
distributor. Its publications replicate OK.
I'd appreciate any explanation of the above.
Thanks
Maja
View 2 Replies
View Related
Feb 22, 1999
I've installed SQL Server Service pack 5a on our test lab Database and have come up with problems with my protocol. Everything works fine IF I set the Net Library to Named pipes. But before the service patch, I was running Multi-Protocol WITH TCP/IP (much faster). How can I make SQL use Multi?
Using Named pipes screws up my replication. Any suggestions???
Thanks,
Andrew
P.S. I also have SP4 on WindowsNT.
View 2 Replies
View Related
Feb 3, 2000
HELP!!!!!!!!!!!!!!!!!!
I loaded SQL SP5a last night on my SQL Server and now none of my users can connect and run their applications.
I removed the virtual server and loaded the sp without any problems (so it seemed). "sa" works fine.
I am getting login failed errors:
Sql State 28000 and Sql Server 4002
Any thougts, ideas, curses would be GREATLY APPRECIATED!!!!!!!!!!!!
View 2 Replies
View Related
Dec 24, 1999
Hi:
I installed SQL sp5a on most SQL servers with no error. However, one server, a special application failed after upgrading to sp5a.
Is there a way to uninstall sp5a and back to sp3 without re-install entire SQL 6.5 on this particular machine?
thanks in advance
david
View 1 Replies
View Related
Dec 28, 1999
Hi all,
I recently upgraded to SQL 6.5- sp5a. I run DBCC TEXTALL as part of my nightly maintenance. Our db is about 3 GB and is heavy on text
fields. Since the upgrade, DBCC TEXTALL hangs up the server until I reboot it. The last message in the error log is "Warning:
out of RA slots... comfigure more RA slots." (or something like that). This never happened before.
BOL says don't monkey with the RA slots per thread, so
I've been adjusting the number of RA worker threads. I raise it, bounce SQL SERVER, and try to run the DBCC TEXTALL again.
Same results. Eventually I got up to 10 RA worker threads, at which point I got an "IO buf_wait" error, which also hung up the server.
I've read that increasing RA worker threads will eventually run you out of buffer space, and it looks like that's what happened.
I'm beginning to think that the problem isn't really with isn't really with the number of RA worker threads I have configured,
but rather with something that sp5a changed. Or maybe DBCC TEXTALL is running into some sort of corruption it can't handle...
Or something...
So, I'm reading up on the relationship between buffer cache, RA, etc., but
the sad fact is that information on that low down level is hard to find, and I don't understand most of it anyway.
Any suggestions, reading recommendations, comments, or jeers would be highly appreciated.
View 1 Replies
View Related
Sep 3, 1999
When running Enterprise Manager from my desktop pc to try and expand a database device I am unable to do so. The size shown is negative, and the max size is the same, with the 'Change Now' box greyed out.
When I log on directly onto the server I can easily expand the db device. There is lots of free space on the server.
Our set up is quite small with four NT workstations and two NT servers with SQL Server 6.5 on them. All these six machines are in the same workgroup. The workstations are on a separate floor to the servers, which are in the computer room. I have a feeling this is a networking issue. Can anyone suggest why this is happening?
View 3 Replies
View Related
Aug 10, 1999
Hi,
Has anyone encountered this?
After applying SP 5a I found out that my SQL strings with sums and groups produced double rows. I found out that grouping one column (type CHAR(6)) produced two distinct rows of the equal values.
All the values in that column have 4 characters, but it seemed like some distinct values were grouped by the whole field length i.e 6 characters. I haven't seen earlier that those blanks after field value change the grouping results.
When I transferred the table and data to old SQL Server without any SPs, query showed distinct values correctly.
The sort order and other settings are the same. Can anyone tell where to look for help?
TIA, Al
View 1 Replies
View Related
Mar 26, 1999
Has anyone gotten clustering to work via the Cluster Wizard in SP5a?
I've got two ProLiant 5500's with the Compaq Clustering S/100 option. I've done a fresh install of NT Enterprise 4.0 SP3, then installed clustering with the Compaq S/100 drivers... everything fails over nicely, can make shares off the virtual server, etc. I then install SQL Server 6.5 EE, then apply SP5a -- so far, so good.
Now I try to run the clustering wizard. The wiz prompts me for my SA password. I enter it, and it gives me a message box that it can't start or log onto the database... but when I look in the event log it appears to have logged on successfully with a Non-trusted connection.
Thanks for the help...
View 1 Replies
View Related
Dec 14, 1999
Hello,
Just in case anybody has had this problem after applying service pack 5a.
a stored procedure that sets serial numbers on records on a temporary table is skipping every other record.
I ran the code manually on isql and could not replicate the error, however when re-compiled on stored procedure it fails misserably.
when is Microsoft going to release a service pack that actually works?
Did you know that Executive does not recognize 2000 as a leap year?
If anybody has any suggestions on this problem, besides the obvious (using a real table) please write back
thanks.
David E. Pierri
Pseudo data-admin
ACNY
View 1 Replies
View Related
Oct 19, 2006
Is it possible to install and configure the MSDTC resource in a SQL Server 2000 cluster after SQL is installed and running?
When I recently went through a rebuild of my cluster, I forgot to install the resource before installing SQL Server. Now, if I install and bring online the MSDTC resource the SQL disk groups will not fail over correctly. The SQL Server resource will not come online.
Thanks in advance for any help. I would really like to avoid rebuilding again.
Andy
View 1 Replies
View Related
May 10, 2007
We have a static class that makes an HTTPWebRequest to get XML data from one of our vendors. We use this as input to a stored proc in SQLServer2005. When I compile this class and call it from a console application in visual studio it executes in milliseconds, everytime. When I compile it, create the assembly and clr function and execute it in SQLServer, it takes around 14 seconds to execute the first time, then on subsequent requests it is again really fast, until I wait for 10 seconds and re-execute, once again it is slow the first time and then fast on subsequent requests. We do not see this behavior when executing outside SQLServer. Makes me think that some sort of authentication is perhaps taking place the first time the function is run in SQLServer? I have no idea how to debug this further. Anyone seen this before or have any ideas?
Here is the class:
Code Snippet
using System;
using System.Collections.Generic;
using System.Text;
using System.Net;
using System.IO;
namespace Predict.Services
{
public static class Foo
{
public static string GetIntradayQuote(string symbol)
{
string returnQuote = "";
HttpWebRequest request = (HttpWebRequest)(WebRequest.Create("http://data.predict.com/predictws/detailed_quote.html?syms=" + symbol + "&fields=1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,28,30"));
request.Timeout = 1000;
HttpWebResponse response = (HttpWebResponse)(request.GetResponse());
StreamReader streamReader = new StreamReader(response.GetResponseStream());
returnQuote = streamReader.ReadToEnd();
streamReader.Close();
response.Close();
return returnQuote;
}
}
}
When I run call it from a console app it is fine.
I compile it into a dll and then create the assembly and function as follows:
Code Snippet
drop function fnTestGetIntradayQuoteXML_SJS
go
drop assembly TestGetIntradayQuoteXML_SJS
go
create ASSEMBLY TestGetIntradayQuoteXML_SJS from 'c:DataBackupsCLRLibrariesTestGetIntradayQuote_SJS.dll' WITH PERMISSION_SET = EXTERNAL_ACCESS
go
CREATE FUNCTION fnTestGetIntradayQuoteXML_SJS(@SymbolList nvarchar(max)) RETURNS nvarchar(max) AS EXTERNAL NAME TestGetIntradayQuoteXML_SJS.[Predict.Services.Foo].GetIntraDayQuote
go
declare @testing nvarchar(max)
set @testing = dbo.fnTestGetIntradayQuoteXML_SJS('goog')
print @testing
When I execute the function as above, again, really slow the first time, then fast on subsequent calls. Could there be something wrong with the code, or some headers that need to be set differently to operate from the CLR in SQLServer?
Regards,
Skipper.
View 1 Replies
View Related
Sep 20, 2006
Hi experts;
I have a problem with unicode character 0x2300
I created this table
create table testunicode (Bez nchar(128))
Insert Data
insert into testunicode (Bez)values('Œ€„¢')
with 2 Unicode characters
Œ€ = 0x2300
„¢ = 0x2122
Selecting the data
select Bez from testunicode
I see
"?„¢"
„¢ = 0x2122 is ok but instead of 0x2300 there is 0x3f
When I modify the insert statement like that ( 8960 = 0x2300 )
insert into testunicode (Bez)values(NCHAR(8960)+'„¢')
and select again voila i see
"Œ€„¢"
Does anyone have an idea?
Thanks
View 1 Replies
View Related
Apr 18, 2008
I am trying to 'load' a copy of a SQLServer 2000 database to SQLServer 2005 Express (on another host). The copy was provided by someone else - it came to me as a MDF file only, no LDF file.
I have tried to Attach the database and it fails with a failure to load the LDF. Is there any way to bypass this issue without the LDF or do I have to have that?
The provider of the database says I can create a new database and just point to the MDF as the data source but I can't seem to find a way to do that? I am using SQL Server Management Studio Express.
Thanks!!
View 1 Replies
View Related
Jul 29, 2005
I'm chasing after a documetn that was available on one of the Microsoftwebsites that was titled somethign like "MS SQL Server Best Practices"and detailed a nyumber of best practices about securing the server.Included in this was revoking public access to the system tableobjects.Can someone post the URL where I can pick this up, or drop me a note oncontacting them for a copy of the document?
View 2 Replies
View Related
Jun 14, 2006
I have an app that uses a sqlserver 2000 jdbc driver to connect to a sqlserver 2000.
Is it possible to do a direct replacement of sqlserver 2000 with sqlserver 2005 express just by reconfiguring the app to point to the express? The app would still be using the sqlserver 2000 jdbc driver to try and make the connection.
If that is a possibility, what can be some differences in the configuration? Previously with 2000 the config information I entered is:
server name: "machinename"( or ip). I've also tried "machiname/SQLEXPRESS"
DB name: name of db instance
port: 1433(default)
user and pass.
My attempts so far results in
"java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket."
and
"java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Unable to connect. Invalid URL."
View 1 Replies
View Related
