I have a problem converting a float filed into nvarchar.
select cast(sold as varchar(50))
where sold=431597.15 results in 431597 and is ignoring always my decimals.
Do you have any idea how to fix this?
ty
In the following code I want to compare 2 values: AccessVal and SQLVal. The values are stored as nvarchars, so I'm isolating the numeric values in a subquery. Notice I'm only selecting 1 row. The commented line, where I compare the values, is throwing the error.
SELECT QA_AutoID, AccessVal, SQLVal
,ROUND(ABS(CONVERT(float, AccessVal,1)),0) as AccessFloat
,ROUND(ABS(CONVERT(float, SQLVal,1)),0) as SQLFloat
FROM QA
WHERE QA_AutoID in (
SELECT TOP 1 QA_AutoID
FROM QA
WHERE ISNUMERIC(SQLVal) = 1 AND ISNUMERIC(AccessVal) = 1
)
--AND ROUND(ABS(CONVERT(float, AccessVal,1)),0) <> ROUND(ABS(CONVERT(float, SQLVal,1)),0)
ORDER BY ROUND(ABS(CONVERT(float, AccessVal,1)),0) DESC
,ROUND(ABS(CONVERT(float, SQLVal,1)),0) DESC
Here is the output with the comparison commented out...
Here's what I get with the comparison line activated:
I've tried converting to numeric, int and bigint instead of float. I've tried CAST instead of CONVERT. Nothing works.
I have a data type float with a value of 10000487930 that I'm trying to insert into a data type nvarchar and am getting the result of '1.00005e+010'. I've tried cast(field as nvarchar) however this is not working. What might fix this? I cannot change the insert table data type.
View 3 Replies View RelatedHi,
how to convert nvarchar datatype to float?
Regards
Prashant
I'm using c# 2.0.
I have a datareader that reads an invoice line item from a table in my SQL Server database. The UnitPrice field is a Money field in SQL server. At the same time I have an invoice class in my application that has a UnitPrice property which is a float.
How do I convert the SQLMoney to a float using my datareader?
Right now I have:
cm.CommandText = "SELECT ItemID, Quantity, UnitPrice, Discount FROM tblInvoiceLineItems";
using (SqlDataReader dr = cm.ExecuteReader())
{
while (dr.Read())
{
LineItem li = new LineItem();
li.UnitPrice = (float)(double)dr.GetFloat(3); // cast error here.
lineItems.Add(li);
}
}
Hi all,
I'm trying to update a table as follows:
Where in the table i got.
OldCol; a varchar
NewCol; Float
Update tbl set newCol = cast(float,oldcol)
Where isNumeric(oldcol) =1
But it give me the follwong error:
Error converting data type from Varchar to Float.
Any suggestion?
Declare @FLine varchar(8000)
Declare @FFloat float(8)
value of @FLine =7 Dir(s) 1,023,817,728 bytes free
select @FLine = rtrim(ltrim((select textline from BCPDiskSpaceTempTable where charindex('bytes free', textline) > 0)))
But I get error saying Error Converting Varchar to Float in the above line can anyone tell me why it is so
Hello all,I need to return back to TSQL two numeric values from anExtended Stored Procedure developed in C. As result my Cdll program produces two float values, the TSQL side expectsto have exactly: numeric(10, 5) and numeric.Given that the structure to fill-up is DBNUMERIC definedas:typedef struct dbnumeric // Numeric (and decimal){BYTE precision; // PrecisionBYTE scale; // ScaleBYTE sign; // 1 = Positive, 0 = NegativeBYTE val[MAXNUMERICLEN]; // Padded little endian value} DBNUMERIC;I do not have any clue how to convert the float C datatypeto DBNUMERIC, specifically how to convert the float to anarray of bytes "BYTE val[MAXNUMERICLEN]".Thanks in advance,Best Regards,Giovanni
View 1 Replies View RelatedError converting data type varchar to float.
I am getting this error. Any one there to guide me
In My table formula(varchar) and value(Float) column.
Example
formula --> (A+B)/C
I am trying to create same expression with value But my below example showing value gets rounded if it is big.
I am trying to do,
Declare @a float = 123456.235
SELECT CONVERT( varchar , @a) Result=>123456
any way to keep same value as It is?
hello anyone... i got this message "Error converting data type varchar to float" when i was trying to insert values into table using instead of trigger...
below is my table ClimateData
quote:USE [PVMC Database]
GO
/****** Object: Table [dbo].[ClimateData] Script Date: 03/26/2008 03:04:44 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[ClimateData](
[Climate_application_id] [uniqueidentifier] NOT NULL CONSTRAINT [DF_ClimateData_Climate_application_id] DEFAULT (newid()),
[Latitude] [float] NULL,
[Longitude] [float] NULL,
[Altitude] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[Climate_type] [varchar](100) COLLATE Latin1_General_CI_AI NULL,
[PV_application_id] [uniqueidentifier] NULL,
CONSTRAINT [PK_ClimateData_1] PRIMARY KEY CLUSTERED
(
[Climate_application_id] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
USE [PVMC Database]
GO
ALTER TABLE [dbo].[ClimateData] WITH CHECK ADD CONSTRAINT [FK_ClimateData_Photovoltaic] FOREIGN KEY([PV_application_id])
REFERENCES [dbo].[Photovoltaic] ([PV_application_id])
ON UPDATE CASCADE
ON DELETE CASCADE
Below is photovoltaic table
quote:USE [PVMC Database]
GO
/****** Object: Table [dbo].[Photovoltaic] Script Date: 03/26/2008 03:06:58 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[Photovoltaic](
[PV_application_id] [uniqueidentifier] NOT NULL CONSTRAINT [DF_Photovoltaic_PV_application_id] DEFAULT (newid()),
[PV_site] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_state] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_type_of_system] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_nominal_power] [float] NULL,
[PV_module] [varchar](150) COLLATE Latin1_General_CI_AI NULL,
[PV_mounting] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_building_type] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_topology] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_new_or_retrofit] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_period_of_design] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_period_of_construction] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_commissioning_date] [datetime] NULL CONSTRAINT [DF_Photovoltaic_PV_commissioning_date] DEFAULT (getdate()),
[PV_site_photo] [varbinary](max) NULL,
[PV_peak_nominal_rating] [float] NULL,
[User_application_id] [uniqueidentifier] NULL,
[Org_application_id] [uniqueidentifier] NULL,
CONSTRAINT [PK_Photovoltaic_1] PRIMARY KEY CLUSTERED
(
[PV_application_id] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
USE [PVMC Database]
GO
ALTER TABLE [dbo].[Photovoltaic] WITH CHECK ADD CONSTRAINT [FK_Photovoltaic_OrganizationDetail] FOREIGN KEY([Org_application_id])
REFERENCES [dbo].[OrganizationDetail] ([Org_application_id])
ON UPDATE CASCADE
ON DELETE CASCADE
GO
ALTER TABLE [dbo].[Photovoltaic] WITH CHECK ADD CONSTRAINT [FK_Photovoltaic_Users] FOREIGN KEY([User_application_id])
REFERENCES [dbo].[Users] ([User_application_id])
ON UPDATE CASCADE
ON DELETE CASCADE
Below also my command for instead of trigger
quote:set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
CREATE trigger [tr_v_PhotovoltaicClimateData] on [dbo].[v_PhotovoltaicClimateData] instead of insert as
BEGIN
insert Photovoltaic (PV_site, PV_state, PV_type_of_system, PV_nominal_power, PV_module,
PV_mounting)
select distinct inserted.PV_site, inserted.PV_state, inserted.PV_type_of_system,
inserted.PV_nominal_power, inserted.PV_module, inserted.PV_mounting
from inserted left join Photovoltaic on inserted.PV_site = Photovoltaic.PV_site
and inserted.PV_state = Photovoltaic.PV_state
and inserted.PV_type_of_system = Photovoltaic.PV_type_of_system
and inserted.PV_nominal_power = Photovoltaic.PV_nominal_power
and inserted.PV_nominal_power = Photovoltaic.PV_module
and inserted.PV_nominal_power = Photovoltaic.PV_mounting
where Photovoltaic.PV_site IS NULL /*** Exclude Organization Detail already in the table ***/
insert ClimateData (Latitude, Longitude, Altitude, Climate_type, PV_application_id)
select distinct inserted.Latitude, inserted.Longitude, inserted.Altitude, inserted.Climate_type,
Photovoltaic.PV_application_id
from inserted inner join Photovoltaic on inserted.PV_site = Photovoltaic.PV_site
left join ClimateData on inserted.Latitude = ClimateData.Latitude
and inserted.Longitude = ClimateData.Longitude
and inserted.Altitude = ClimateData.Altitude
and inserted.Climate_type = ClimateData.Climate_type
where ClimateData.Latitude IS NULL /*** Exclude Organization Types already in the table ***/
END -- trigger def
and finally, i hav tried using this command to insert into table v_PhotovoltaicClimateData.. this is the command to insert
quote:insert into v_PhotovoltaicClimateData(PV_site, PV_state, PV_type_of_system, PV_nominal_power,
PV_module, PV_mounting, Latitude, Longitude, Altitude, Climate_type)
values ('CETDEM', 'Sequ Inspection', 'Cheras', 34.44, 'ew', 'ewew',
34343.44, 323.32, 'ewew', 'ewewe')
and i got this error...
quote:Msg 8114, Level 16, State 5, Procedure tr_v_PhotovoltaicClimateData, Line 6
Error converting data type varchar to float.
so anyone... plzz help me...
Hello everyone... i have some problem with instead of trigger... after insert values into v_PhotovoltaicClimateData, i got this error, Msg 8114, Level 16, State 5, Procedure tr_v_PhotovoltaicClimateData, Line 6
Error converting data type varchar to float.
below is my DDL for Photovoltaic table
quote:CREATE TABLE [dbo].[Photovoltaic](
[PV_application_id] [uniqueidentifier] NOT NULL CONSTRAINT [DF_Photovoltaic_PV_application_id] DEFAULT (newid()),
[PV_site] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_state] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_type_of_system] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_nominal_power] [float] NULL,
[PV_module] [varchar](150) COLLATE Latin1_General_CI_AI NULL,
[PV_mounting] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_building_type] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_topology] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_new_or_retrofit] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_period_of_design] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_period_of_construction] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_commissioning_date] [datetime] NULL CONSTRAINT [DF_Photovoltaic_PV_commissioning_date] DEFAULT (getdate()),
[PV_site_photo] [varbinary](max) NULL,
[PV_peak_nominal_rating] [float] NULL,
[User_application_id] [uniqueidentifier] NULL,
[Org_application_id] [uniqueidentifier] NULL,
CONSTRAINT [PK_Photovoltaic_1] PRIMARY KEY CLUSTERED
(
[PV_application_id] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
Below is my DDL for ClimateData table
quote:CREATE TABLE [dbo].[ClimateData](
[Climate_application_id] [uniqueidentifier] NOT NULL CONSTRAINT [DF_ClimateData_Climate_application_id] DEFAULT (newid()),
[Latitude] [float] NULL,
[Longitude] [float] NULL,
[Altitude] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[Climate_type] [varchar](100) COLLATE Latin1_General_CI_AI NULL,
[PV_application_id] [uniqueidentifier] NULL,
CONSTRAINT [PK_ClimateData_1] PRIMARY KEY CLUSTERED
(
[Climate_application_id] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
below is my v_PhotovoltaicClimateData
quote:CREATE VIEW [dbo].[v_PhotovoltaicClimateData]
AS
SELECT dbo.Photovoltaic.PV_site, dbo.Photovoltaic.PV_state, dbo.Photovoltaic.PV_type_of_system, dbo.Photovoltaic.PV_nominal_power,
dbo.Photovoltaic.PV_module, dbo.Photovoltaic.PV_mounting, dbo.ClimateData.Latitude, dbo.ClimateData.Longitude, dbo.ClimateData.Altitude,
dbo.ClimateData.Climate_type
FROM dbo.ClimateData INNER JOIN
dbo.Photovoltaic ON dbo.ClimateData.PV_application_id = dbo.Photovoltaic.PV_application_id
below is my instead of trigger command...
quote:CREATE trigger [tr_v_PhotovoltaicClimateData] on [dbo].[v_PhotovoltaicClimateData] instead of insert as
BEGIN
insert Photovoltaic (PV_site, PV_state, PV_type_of_system, PV_nominal_power, PV_module,
PV_mounting)
select distinct inserted.PV_site, inserted.PV_state, inserted.PV_type_of_system,
inserted.PV_nominal_power, inserted.PV_module, inserted.PV_mounting
from inserted left join Photovoltaic on inserted.PV_site = Photovoltaic.PV_site
and inserted.PV_state = Photovoltaic.PV_state
and inserted.PV_type_of_system = Photovoltaic.PV_type_of_system
and inserted.PV_nominal_power = Photovoltaic.PV_nominal_power
and inserted.PV_nominal_power = Photovoltaic.PV_module
and inserted.PV_nominal_power = Photovoltaic.PV_mounting
where Photovoltaic.PV_site IS NULL /*** Exclude Photovoltaic already in the table ***/
insert ClimateData (Latitude, Longitude, Altitude, Climate_type, PV_application_id)
select distinct inserted.Latitude, inserted.Longitude, inserted.Altitude, inserted.Climate_type,
Photovoltaic.PV_application_id
from inserted inner join Photovoltaic on inserted.PV_site = Photovoltaic.PV_site
left join ClimateData on inserted.Latitude = ClimateData.Latitude
and inserted.Longitude = ClimateData.Longitude
and inserted.Altitude = ClimateData.Altitude
and inserted.Climate_type = ClimateData.Climate_type
where ClimateData.Latitude IS NULL /*** Exclude Climate Data already in the table ***/
END -- trigger def
this is my commad insert values using instead of trigger that i've created...
quote:insert into v_PhotovoltaicClimateData(PV_site, PV_state, PV_type_of_system, PV_nominal_power,
PV_module, PV_mounting, Latitude, Longitude, Altitude, Climate_type)
values ('CETDEM', 'Sequ Inspection', 'Cheras', 34.44 , 'ew', 'ewew',
34343.44, 323.32, 'ewew', 'ewewe')
after execute this commad, i got this error..
quote:Msg 8114, Level 16, State 5, Procedure tr_v_PhotovoltaicClimateData, Line 6
Error converting data type varchar to float.
what should i do??? anyone help me.
I have created a stored procedure that contain this field (below) inorder to meet certain criteria. But my problem is when I try to runthe stored procedure I encounter an error "Error converting data typevarchar to float".CASE Final WHEN 0 THEN '--' ELSE Final END AS FinalGradeThe Final field is a float data type.Could anyone teach me how to fix this problem?
View 1 Replies View RelatedHello all,
I'm trying to convert a nvarchar datatype to int
(ie:1234-56-78 to 12345678) . These values are primary keys in two tables. Both these tables have 3500 rows of this key type. I want to convert this to a int so I can make it a AutoNumber primary key so I can increment it. Is this possible? If so, how do I do it. Do I need to delete the dashes first some how? I fairly new to database adminstration, so any guidance will be greatly appreciated.
Thank You
I am importing a couple SAS datasets to SQL Server 2008 for a project. The dates are in a float format, they show up as DT_R8 in SSIS. How can I convert these values to SQL server datetime? I have tried dozens of methods I found on-line with no success, I keep getting 'Arithmetic overflow error converting expression to data type datetime.' errors.
View 0 Replies View RelatedAm converting varchar field to float and summing using group by and next inserting to varchar field(table).
while inserting float value it is converting to exponential ex:1.04177e+006 but if i execute only select statment actual float value will get display ex:1041765.726
My question is why it is converting while inserting ? and how to avoid it.
select query : SUM(CONVERT(float,(rtrim(REPLACE(REPLACE( column1, CHAR(13), ' '), CHAR(10), ' '))))) as AggregateValue
Columns from database have values like 1,5 etc and I'm getting the error: Syntax error converting the nvarchar value '1,5' to a column of data type int. when trying to convert from nvarchar to int:
SELECT CONVERT(int, MyNVarChar_column) FROM MyTable
What I'm doing wrong? Thanks a lot
For a SQL statement in an Alias column I am am combing severalcolumns.But I am having problems with one column as it is a smallint.I get this errorSyntax error converting the nvarchar value to a column of data typesmallintMy Sql statement "Select Stilngcol1 + stringcol2 + intcol1 + stringcol3 As NewColNamefrom Table1I was wondering is there anyway to format/convert the smallint tonvarchar, without changing the database.
View 3 Replies View Related
i have some fields in SQL Server table as nvarchar(50) and the user actually enters date (example : 02/05/07) now they want those fields to be converted to datetime or small datetime field.
How do i achieve it without losing data?
Thanks
bhu
So I have two tables with similar columns etc, unfortunately the Insert to the History table fails. Noto sure how to format.
Source Table.
CREATE TABLE [dbo].[SKUCURRENT](
[UID] [int] IDENTITY(1,1) NOT NULL,
[SKU] [nvarchar](100) NOT NULL,
[WHSELOC] [nvarchar](50) NOT NULL,
[WEIGHT] [nvarchar](50) NOT NULL,
[Code] ....
I have a field in nvarchar type. It contains data like 0, :23, 1:57, ... all in minutes and seconds. Now, I need to convert it to MM:SS using query and get the Average of this column. How can I do it? I have tried Avg(Convert(nvarchar(20), [Calling Time], 108)) .. but I got error : The average aggregate operation cannot take a nvarchar data type as an argument.Help!!!! :(
View 1 Replies View RelatedHi there,I have a table named Action. This table has a column InPrice with datatypenvarchar(12). I want to change its datatype from nvarchar(12) to money. Ibrowsed through the values and removed any dots. Th column now has onlynumeric values (and commas for decimal values such as 105,8). When I try tochange the datatype from nvarchar to money, following mesage is displayed:ADO error: Cannot convert a char value to money. The char value hasincorrect syntax.How can I solve this problem? I cannot figure out which values are causingthis error.Thanks in advance,Burak
View 4 Replies View RelatedI need help converting an nvarchar value to int. I receive a SQL error when running the following query...
"SELECT DISTINCT [Time Cards].TimeCardID, [Time Cards].Status, [Time Cards].Verification, [Time Card Hours].[Date Worked], [Time Card Hours].[Billable Hours], [Time Card Hours].[Billing Rate], [Time Card Hours].[Overtime Hours], [Time Card Hours].[Overtime Rate], Employees.FirstName, Employees.LastName, [Function].[Function], [Time Card Hours].[Invoiced Hours], [Time Card Hours].[Invoiced Overtime], [Time Cards].[30 Day Grace]
FROM [Function] INNER JOIN (Employees INNER JOIN ([Time Cards] INNER JOIN [Time Card Hours] ON [Time Cards].TimeCardID = [Time Card Hours].[Time Card ID]) ON Employees.EmployeeID = [Time Cards].EmployeeID) ON [Function].FunctionID = Employees.FunctionID
WHERE ((([Time Cards].[30 Day Grace])=-1));"
[Time Card Hours - nvarchar, Time Cards - int]
Hi all
I want to pass a list of nvarchar characters to my procedure, then import them into a temporary table as numeric(5,2) numbers.
The code below does this but the values are corrupted (e.g. 76.25 becomes 7 in the table).
Can anyone please tell me what I'm doing wrong? Thank you!
declare @separator_position int
declare @array_value nvarchar
declare @separator char
DECLARE @numberList NVARCHAR(MAX)
SET @numberList = '23|76.25|100.36|45.54|87.14|74.25|8|98|'
SET @separator = '|'
SET @separator_position = NULL
SET @array_value = NULL
DECLARE @myTable TABLE(ID INT IDENTITY(1,1), compLevel NUMERIC(5,2))
WHILE patindex('%' + @separator + '%', @numberList) <> 0
BEGIN
SELECT @separator_position = patindex('%' + @separator + '%' , @numberList)
SELECT @array_value = LEFT(@numberList, @separator_position - 1)
INSERT INTO @myTable (compLevel) VALUES (CONVERT(NUMERIC(5,2), @array_value))
SELECT @numberList = stuff(@numberList, 1, @separator_position, '')
END
SELECT * FROM @myTable
i have the following code:
SELECT Quantity
FROM dbo.BNYForwardsTaxLotsForwards
WHERE investmentType ='Forward Cash'
and Quantity < 0
And I get the following error Msg 245, Level 16, State 1, Line 1..Conversion failed when converting the nvarchar value '-12213949.9' to data type int.
Hi,
I used to work with Sql 2000 and I could easily import a text file into my database and then convert the fields (all nvarchar) to appropriate data types. However, this procedure does not work with Sql 2005.
After I import a text file to Sql 2005 and when I convert nvarchar to numeric, I get "Error converting data type nvarchar to numeric".
Could you please let me know how can I fix this issue. Thanks in advance for your reply.
One of my clients decided to put letters into their customers' account numbers. They have a numbering scheme where all temporary accounts have a letter in the account OR are numbered greater than 33000, and all permanent accounts are all digits and less than or equal to 33000. all primary accounts have a NumberSuffix of 000.
Now i am tasked with retrieving all primary, non-temp accounts. I cannot simply do WHERE Number <= 33000 because when it gets to an account containing a letter like "00A01", it craps out and says "Conversion failed when converting the nvarchar value '00A01' to data type int."
So decided to run a filtering query first to filter out all accounts with letters, and then from that dataset select all accounts <=33000.
WITH members (FirstName, LastName, Number, NumberSuffix) AS
(
SELECT
dbo.Entity.FirstName,
dbo.Entity.LastName,
dbo.Entity.Number,
dbo.Entity.NumberSuffix
FROM
dbo.Entity
WHERE
NumberSuffix = 000 AND
Number NOT LIKE '%A%' AND
Number NOT LIKE '%B%' AND
Number NOT LIKE '%C%' AND
Number NOT LIKE '%D%' AND
Number NOT LIKE '%E%' AND
Number NOT LIKE '%F%' AND
Number NOT LIKE '%G%' AND
Number NOT LIKE '%H%' AND
Number NOT LIKE '%I%' AND
Number NOT LIKE '%J%'
)
SELECT *
FROM
members
WHERE
Number <= 33000
ORDER BY
Number
when i do this, i get the same error for some reason. Yet when i execute this at the end instead:
SELECT *
FROM
members
WHERE
Number LIKE '%A%'
ORDER BY
Number
i get an empty set (meaning it actually does get filtered).
but somehow it still able to participate in a range comparison?
WHY??
thanks,
Leon
Okay, I have the following store procedure and I kept getting an error.
Code Block
ALTER PROCEDURE [dbo].[Search]
-- Add the parameters for the stored procedure here
@schoolID int = NULL,
@scholarship varchar(250) = NULL,
@major varchar(250) = NULL,
@requirement varchar(250) = NULL,
@debug bit = 0
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Insert statements for procedure here
Declare @SQL as Varchar(4000);
Declare @Params as Varchar(3000);
Set @SQL = N'SELECT * FROM [scholarship] WHERE [sectionID] = ' + @schoolID;
Set @Params = N'@scholarship VARCHAR(250),@major VARCHAR(250),@requirement VARCHAR(250)'
If @scholarship IS NOT NULL
Set @SQL = @SQL + N' AND [scholarship].[schlrName] LIKE + ''%'' + @scholarship + ''%'''
If @major IS NOT NULL
Set @SQL = @SQL + N' AND [scholarship].[Specification] LIKE + ''%'' + @last + ''%'''
If @requirement IS NOT NULL
Set @SQL = @SQL + N' AND ([scholarship].[reqr1] LIKE + ''%'' + @requirement + ''%'''
If @requirement IS NOT NULL
Set @SQL = @SQL + N' OR [scholarship].[reqr2] LIKE + ''%'' + @requirement + ''%'''
If @requirement IS NOT NULL
Set @SQL = @SQL + N' OR [scholarship].[reqr3] LIKE + ''%'' + @requirement + ''%'''
If @requirement IS NOT NULL
Set @SQL = @SQL + N' OR [scholarship].[reqr4] LIKE + ''%'' + @requirement + ''%'''
If @requirement IS NOT NULL
Set @SQL = @SQL + N' OR [scholarship].[reqr5] LIKE + ''%'' + @requirement + ''%'')'
If @debug = 1
PRINT @SQL
Exec sp_executesql @SQL, @Params, @scholarship, @major, @requirement
END
And I kept getting this error:
Msg 245, Level 16, State 1, Procedure Search, Line 28
Conversion failed when converting the nvarchar value 'SELECT * FROM [scholarship] WHERE [sectionID] = ' to data type int.
Any help is much appreciated.
Hi i keep getting this error when i search based on Team name (dropdownlist) or coach name(textbox). However it works when i make the search based on the region id(dropdownlist) here is my stored procedure;ALTER PROCEDURE [dbo].[stream_FindTeam]
-- Add the parameters for the stored procedure here
@coachName varchar(100),
@TeamName varchar(100),@regionID INT
AS
SELECT TeamID, coachName FROM Teams WHERE coachName LIKE @coachName OR TeamName= @TeamNameOR regionID = @regionID;
Here is my code;SqlConnection conn = new SqlConnection(ConfigurationManager.ConnectionStrings["streamConnectionString"].ConnectionString);
conn.Open();SqlCommand command = new SqlCommand("stream_FindTeam", conn);
command.CommandType = CommandType.StoredProcedure;command.Parameters.AddWithValue("@coachName", coachName.Text);
command.Parameters.AddWithValue("@TeamName", TeamList.SelectedValue);command.Parameters.AddWithValue("@regionID", Region.SelectedValue);SqlDataReader reader = command.ExecuteReader(CommandBehavior.CloseConnection);
DataList1.DataSource = reader;
DataList1.DataBind();
conn.Close();
I am trying to do some amount calculations.
The amount was declared as nvarchar data type.
I did the following coding. I want to get 2 places right of decimal
but am getting only one place right of decimal.
SELECT
(CAST(EQ_TotQuoteAmnt AS Float(7,2)) -
CAST(EQ_InsFee AS Float(7,2)) - 150) as Inforce_Premium
FROM Quoted
Can someone please help me with the syntax?
Thanks in advance.
M. Khan
HI,
I HAVE BEEN TRYING TO TRANSFORM AN OLD TABLE TO A NEW FORMAT AND CHANGE SOME OF THE DATATYPE FORMATS USED IN THE OLD ONE.
OUT OF WHICH ONE IS A COLUMN CALLED AS FORM_RECEIVE_DATE WHICH HAS NVARCHAR(41) AS DATATYPE IN THE OLD TABLE CREATED BY A PREVIOUS DBA (DON'T KNOW wHY?)
wHILE CONVERTING IT INTO DATATYPE DATETIME , I AM GETTING THIS ERROR :- "Arithmetic overflow error converting expression to data type datetime." i DON'T KNOW WHY
hERE ARE FEW EXAMPLES OF THE DATA CONTAINED IN THE PREVIOUS TABLE :-
05082003
05062003
05142003
COULD YOU PLS TELL ME A WAY TO SOLVE THIS ?
I copying data from our Informix 7.2 database into SQL Server 2K using DTS but hitting errors during the process. There appears to be date data within Informix that will not convert properly when moving into SQL. Since the error is appearing at the 1.5million (approx.) record. I figured on changing from datetime to nvarchar. Works like a charm! :-)
My new problem is converting it back to datetime so I can query against the date without having to create scripts to parse the field.
The data in SQL currently looks like this -> 2000-11-29 (nvarchar(50))
I would like to have it -> 11/29/00 (datetime)
Any help is greatly appreciated!
JT
The goodness we share is rewarded twice!
I have a column name DateofRecord and it is nvarchar type..all the values in this column are like this
"04/24/2013'
"05/01/2014"...etc...
My requirement is to convert this column into Datetime ?
I tried so many ways using cast and convert functions like cast(dateofrecord,datetime) or like convert(datetime,replace(DateofRecord,'"','''')) ..it didnt worked..