I am able to connect but when I try to use the advanced sql generation options the two check boxes are non enabled (generate insert, update, and delete statements
use optimistic concurrency
what is happening the user id has permissions to update/delete/select from the selected table
Hello. Im trying to create an SQLDataSource control programmatically. I need to do this because I want to do some stuff on my MasterPage's 'Page_Init' event.
heres my code (Master.master.vb): Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
lblUser.Text = Page.User.Identity.Name
Dim PUser As New ControlParameter
PUser.ControlID = "lblUser"
PUser.Name = "LoginName"
PUser.PropertyName = "Text"
PUser.Type = TypeCode.String
PUser.DefaultValue = Page.User.Identity.Name
Dim SQLDS_Login As New SqlDataSource
SQLDS_Login.ID = "SQLDS_Login"
SQLDS_Login.ConnectionString = "I put conection string here. How do I use the one on my web.config?"
SQLDS_Login.SelectCommand = "SELECT [LoginID], [LoginName], [Role], [Status] FROM [myLogin] WHERE ([LoginName] = @LoginName)"
SQLDS_Login.SelectParameters.Add(PUser)
SQLDS_Login.SelectCommandType = SqlDataSourceCommandType.Text
GridView1.DataSource = SQLDS_Login
GridView1.DataBind()
End Sub
When i run, i get this error message:
The SqlDataSource control 'SQLDS_Login' does not have a naming container. Ensure that the control is added to the page before calling DataBind.
I never had any problem with Inserts, Updates and Deleting, but I have never made it work for Select when doing it programmatically.
Can you help me with this?
Hello All
im developing web application in VS2005(C#)
while Creating SQLDATASource for Gridview im getting Following error
cannot get web application service
Please help ME
Regards
Balagangadharan.R
When I create a new odbc connection to a SQL server 2005 Db I get a failure telling me dat de SQL server does not allow remote connections.
How can I allow the server to allow this.
Any help appreciated
regards
If we bind a GridView to a SQLDataSource, is it not a connected usage, which locks up one connection thread ?
View 2 Replies View RelatedI'm new to ASP.NET and I've searched before posting. I have a simple form containing a FormView control. The FormView uses a SQLDataSource. This works fine and in 30 seconds I have a working form without writing any code.A form built this way causes problems with connection pooling because I am not closing the connection. What is the best method for me to remedy this? Every resource I've found explains that I have to explicitly close the connection. How do I do that in this case? Dispose the SQLDataSource in the FormView DataBound event? Rewrite the form so I can control opening and closing of the connection?Thanks in advance.
View 1 Replies View RelatedGot a weekly problem when our ISeries DB goes down for maintenence i get ODBC connection errors when the SqlDataSource tries to connect. Is there a method I can use to catch the exception? If so, what event from SqlDataSource can i use, and what approach should I take?Thanks in advance!
View 2 Replies View RelatedMy total test page is shown below. I monitor the connections by SP_WHO2. Without the second call, connection pooling seems to be working, ie I refresh my browser repeately but the number of connections as seen from SP_WHO2 does not increase.
However, if I have the second call, every time I refresh the page at the browser, the number of connections increases by one. This is obviously not acceptable in a real world application.
I tried both Integrated Authentication (with no impersonation) and using a hardcoded service account. Both have the exact same results. In fact this test is not about multi-user yet, it is the same single user just refreshing the same page.
May I know what have I done wrong? All the documentation from Microsoft says close the connection after using it. In the case of SqlDataSource how do I close the connection?
Thanks
<%@ Page Language="C#" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<script runat="server">
protected void Page_Load(object sender, EventArgs e)
{
SqlDataSource1.SelectCommand = "Select ID from Master";
System.Data.SqlClient.SqlDataReader reader =
(System.Data.SqlClient.SqlDataReader)SqlDataSource1.Select(DataSourceSelectArguments.Empty);
if (reader.HasRows && reader.Read())
Label1.Text = reader["ID"].ToString();
SqlDataSource1.Dispose();
//second call: read from another table
SqlDataSource1.SelectCommand = "Select Name from Students";
reader = (System.Data.SqlClient.SqlDataReader)SqlDataSource1.Select(DataSourceSelectArguments.Empty);
if (reader.HasRows && reader.Read())
Label1.Text += reader["Name"].ToString();
reader.Close();
}
</script>
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title>Untitled Page</title>
</head>
<body>
<form id="form1" runat="server">
<div>
<asp:Label ID="Label1" runat="server" Text="Label"></asp:Label>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:myConnectionString %>"
DataSourceMode="DataReader"></asp:SqlDataSource>
</div>
</form>
</body>
</html>
I have a connection string in the connection string section of my web.config, when I add a SqlDataSource to my page and click the ConnectionString property, My connection string does not appear in the drop down list, the only option I have is New Connection String... Are you supposed to be able to select a connection string from your web.config or am I supposed to do this on page_load?
TIA,Jason
I've added an SqlDataSource control to my web page and selected "Configure Data Source" on it. This brings up a "Choose Your Data Connection" wizard, and it asks you to select from a dropdown list of presumably pre-existing connection strings in my web.config file. However none of my connection strings will display in that dropdown list. The only thing i can do is hit the "Create New Connection" button and this adds yet another connection string to my web.config file. I've already ran through the wizard once, created a new connection string, but when i run through the wizard again, even the new connection string - the one created by the last wizard will not appear in the dropdown list. Any suggestions? Jason
View 3 Replies View RelatedJust downloaded and installed the VS 2008 Express and created/tested some websites. I have done several aspx websites using VS 2005 during the last 2 years. Still I don't quite understand the details of coding the database connection and DataBing. For example, what does 'providerName',and Integrated Security really mean?Why in the Web.config file these are providerName="System.Data.SqlClient" and Integrated Security=True? Why in Default.aspxthere are both ntegrated Security=True;and USER ID=WEB; Password=webwebweb1". I know these may deal with the authentication mode of my SQL Serverdatabase.For the VS 2008 Express and SQL Server 2005 Express, I installed in my XP home PC, I used the file system websites, If I upgrade to XP Pro and install IIS web server, and use SQL Server 2005, what might be different? Jeffrey Web.config <connectionStrings> <add name="NorthwindConnectionString" connectionString="Data Source=D5MRY6G1SQLExpress;Initial Catalog=Northwind;Integrated Security=True" providerName="System.Data.SqlClient" /> </connectionStrings>Default.aspx <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="Data Source=D5MRY6G1SQLExpress;Initial Catalog=Northwind;Integrated Security=True; USER ID=WEB; Password=webwebweb1" ProviderName="<%$ ConnectionStrings:NorthwindConnectionString.ProviderName %>"MasterDetail.aspx <asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:NorthwindConnectionString %>"
View 1 Replies View RelatedI am trying to connect to a database on an MS Sql server, I typed the code exactly like what is shown in the tutorial and I keep getting an error... (Error in line 6)
Line 4: Dim oODBCConnection As OdbcConnection
Line 5: Dim sConnString As String = _
Line 6: "Driver={SQL Server};" &_
Line 7: "Server=209.151.130.8;" &_
Line 8: "Database=blah;" &_
...(Error in line 6)
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: BC30203: Identifier expected.
In my project, I have added a database called aspnetdb.mdf and I store all the required information here. Now I want to write a seperate Cryatl Report for my manager, that accesses this database and display required data. This report is not a part of the asp.net project. This is only for my manager. My database is not attached to any server. I just use the attachdb in the coonection string of my project to attach this database. no I want my crystal report to access this database. If I can create an ODBC connection to this database, it will solve my problem. Dows any body know how to access this database from Crystal with or without ODBC?
Any help is greatly appreciated.
Hi - hope someone can help. We're creating a ASP.NET C# site that allows a user to connect to any of our 100+ SQL Servers and query a database that sits on every server. I'm trying to work out (and failing) how we can set the 'Data Source' in a connection string dynamically using the server name selected by the user in a drop down box. Any help appreciated, thanks in advance,
View 2 Replies View RelatedCan We Create a SQL Server connection to DB2 using linked servers?If yes, how can we do that.ANd one more thing is that my DB2 is on unix and sqlserver is on windows.
Thanks.
We have a mobile device project, which has a database file (Database.sdf) as part of the project.
I am trying to connect to it to insert a record. The syntax I'm using is:
string connection = @"data source=Database.sdf";
SqlCeConnection conn=new SqlCeConnection(connection);
conn.Open();
I have tried various connection strings such as
"data source=MyDocumentsDatabase.sdf";
and
"data source=C:MyProjectsThisParticularProjectDatabase.sdf"; << the connection string in teh server explorer
and
"data source=MyAssemblyName.Database.sdf";
and
"data source=MyAssemblyNameDatabase.sdf";
I've also tried getting the path the the executing assembly and adding that in, but still no luck.
but they all throw the error:
The database file cannot be found. Check the path to the database. [ File name = Database.sdf ]
I have searched the internet and found no explanation about how the path to the Database is made up (ie is it the path on *my* computer, or the virtual mobile device?) and how I can actually get the path the the database without hardcoding it.
Can anyone help please??
Thanks!!
do we have to create connection and assign it to command object before creating SqlCacheDepency? chek the code below. SqlServer is not invalidating cache when there is update. When i create Dependency using command object, at that time command object does not have connection. It will assign connection to command object in Excute method
SqlCommand cmd = new SqlCommand(commandText);cmd.CommandType = CommandType.StoredProcedure;SqlCacheDependency cacheItem = new SqlCacheDependency(cmd);DataSet result;result = DBHelper.Execute(cmd);HttpRuntime.Cache.Insert(cacheItemName, result, cacheItem);
Hi,
platform window xp, SQL Server
I have created a new server registration called 'MASTECH'
with this registration I have created a database called 'youngerNow'
As far as I am aware, no username nor password have been created.
I wish to access the database through asp.
I attempt to create connection with below code
strConn = "Provider=SQLOLEDB; Data Source=mastech; Initial Catalog=youngerNow"
Set Conn=Server.createObject("ADODB.Connection")
Conn.Open strConn
Conn.Close
however I am getting the below error.
Error Type:
Microsoft OLE DB Provider for SQL Server (0x80004005)
Login failed for user 'IUSR_MASTECH'. Reason: Not associated with a trusted SQL Server connection.
/younger now/books.asp, line 199
Anyway help would be appreciated.
regards
steve
hi how could i create my own server connection in sql 2000.i have a problem because everytime i make a new server registration it always tell that it does not exist and access denied.pls help me.
View 6 Replies View Related64b SQL2005 EE and all clent tools installed on the same server. Im trying to create a new connection in DTS Designer but after succesful test of the connection it errors out with
The new connection manager couldnt be created. Additional info : Exeption from HRESULT 0xC0010014
Any idea whats the problem here?
I am connecting ADAM[Active directory in application mode] using SSIS using OLEDB connection manager. I have
created SQL/LDAP query
"SELECT cn, displayName, description
FROM 'LDAP://localhost:389/O=myContainer'
WHERE displayName = 'xxx'
This query displays proper data in query builder when I run the query.But when I say OK on OLEDB source manager it gives following error
===================================
Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E21.
(Microsoft Visual Studio)
===================================
Exception from HRESULT: 0xC0202009 (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.ReinitializeMetaData()
at Microsoft.DataTransformationServices.DataFlowUI.DataFlowComponentUI.ReinitializeMetadata()
at Microsoft.DataTransformationServices.DataFlowUI.DataFlowAdapterUI.connectionPage_SaveConnectionAttributes(Object sender, ConnectionAttributesEventArgs args)
Also if above query is modified to Select * FROM 'LDAP://localhost:389/O=myContainer' , it only returns adsPath.
Can anyone help what is wrong in this?
Hi,
View 3 Replies View RelatedI am ultra new to this so thanks in advance for any help.
I was trying to create a connection to a database that I created in SQL Express. I am essentially trying to submit three attributes to the existing database from a table that consists of three textboxes and a submit button. I would like all of the code to be in the head of the page (because that is the standard here) so I wanted to know what the connection string should be in Visual Basic 2005 Express to establish a connection on the same machine. I'm not sure about the connection string, but I am also not sure about a lot of the code. Also, the Using clauses seem to give me an error (where should it go?). This is what I have in the head of the page (visual C# by the way). Also, I got this from http://www.csharp-station.com/Tutorials/AdoDotNet/Lesson03.aspx :
Using System.Data;Using System.Data.SqlClient;protected void Button1_Click(object sender, EventArgs e){SqlConnection conn = new SqlConnection("Data Source=(local);Database=CustomersDB;Trusted Connection=true");conn.Open();string insertstring = @" insert into Catagories (CustomerID, CustomerName, CustomerEmail) values (" + textbox1.value + ", " + textbox2.value + " + ", textbox3.value");SqlCommand cmd = new SqlCommand(insertstring, conn);Sql.ExecuteNonQuery();conn.close();}
If there is absolutely any insite into the problems with my code, I really appreciate it.
I have an ASP.Net 2.0 app that is using sql express. Every couple days I get a "Timeout Expired" error message when creating a connection (not when running a query). This never happens on dev machine, just on production server. I am using a named instance of sqlexpress, sample connection string: "Data Source=.sqlexpress;Database=MyDBName;Trusted_Connection=true;". This is all running on Win2K3 server under NETWORK SERVICE account. Any ideas?
Stack trace follows:[SqlException (0x80131904): Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +734867 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error) +556 System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj) +164 System.Data.SqlClient.TdsParserStateObject.ReadPacket(Int32 bytesExpected) +34 System.Data.SqlClient.TdsParserStateObject.ReadBuffer() +30 System.Data.SqlClient.TdsParserStateObject.ReadByte() +17 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +59 System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111
Hello,
I am new to SSIS. Could someone please tell me how to make the Connection Manager use the connection string from the configuration file?
I am trying to have connection information set in one place for all the packages to use.
I have already created a .dtsConfig file based on my existing Connection Managers.
Do I need seperate dtsConfig files for each database?
Thank you.
MG
Hey guys,
Hope one of you can help me. I've got SQL Server 2005 Express installed on a laptop. I'm trying to create an ODBC connection to it so that I can access the database from a program locally that will be writing to it. I can connect to the SQL instance by listing the server name as DSR-XXXXXXX(ComputerName)SQLEXPRESS
However... when I access that ODBC connection, it doesn't see the database DBProScout (which was created inside SQL Express on this laptop locally), and I cannot access the tables within it. The only tables that I can access are system tables associated with SQL Server Express.
What could I be doing wrong?
Thanks!
Todd
Hi,
I am trying to Create an OLEDB Connection from SSIS to Inforrmix without any success. Would someone be able to help.We are running Informix version 9.4. We were able to create an OLEDB connection with SQL server 2000 and DTS. But, when trying to create an OLEDB connection using SQL server 2005 and SSIS, I am getting an error message. The connection is created successfully but cannot access databases and tables on informix. The error message when trying to load the Informix tables:
'Could not retrieve table information for the connection manager ....
'Ifxoledbc.e' failed with no error message available '
Your feedback is appreciated
Thank you,
Patrick.
http://msdn2.microsoft.com/en-us/library/ms345276.aspx
does anyone know where this can be obtained? it did not come with the RTM. it does not seem to be available via download either?
a little help here!
I have a Microsoft Access application which uses linked SQL Server tables. I would like to create an ODBC DSN which would be available to all users so that I don't have to create a DSN on each machine. Can this be done? The Access application resides on a shared drive (Windows). Thanks for your help.
I am trying to create a Data Connection Library linking an SQL Database to SP2013. I have been unable to locate instruction or where in SP Central Administration to create the library. The option to Create Data Connection is not available.I am creating an InfoPath form to create-read-write-update data in the SQL database.
View 2 Replies View RelatedHopefully there's an easy answer for this. I'm totally new to SQL server and I'm trying to upsize an Access database. Whether I use the upsizing wizard or try to create a data source through the ODBC Data Source Administrator, I get a connection failed error. It tells me the server does not exist or my login is incorrect. I'm using NT authentication to connect to the server on my local drive. I just installed the whole 2005 express edition and the only thing that came up during the install was that I didn't have IIS installed. I didn't see how that would be relevant, so I went ahead with the install.
Shouldn't this work with the default setup? I've searched around trying different "solutions" although I doubt they were specifically related to this very basic problem. I tried giving my login every right I could find through in the database engine properties in the server management studio, which connects fine itself with just my network login name and no password. What am I missing?
Connection to SQL server files (*.mdf) require SQL express 2005 to function properly. please verify the installation of the component or download from http://go.microsoft.com/fwlink/?linkid=49251
I AM GOING TO RIP MY HAIR OUT WITH THIS PROBLEM. I have reinstalled both sql server express 2005 and VWD about 5 times with the same problem. please, please, please someone throw me a bone here and help me resolve this problem.
When I create a new EMPTY website and I rightclick on my website in the solution explorer and choose add item, I chooe SQL Database, I give it a name 'database.mdf' and click add. I get the following message:
you are attempting to add a database to an asp.net application. for a database to be gfenerally consumable in your site, it should be placed inside the 'app_data' folder. would you like to place the database inside the 'app_data' folder? I click YES (I know this message is normal)
then I get the following message:
Connection to SQL server files (*.mdf) require SQL express 2005 to function properly. please verify the installation of the component or download from http://go.microsoft.com/fwlink/?linkid=49251
I can add anything else but this damn mdf file.
thanks for all your help in advance.
What is the C# code I use to do this?
I'm guessing it should be fairly simple, as there is only one row selected. I just need to pull out a specific field from that row and then insert that value into a different SqlDataSource.