hello,
I am trying to insert date and time into my table.
insert into <table_name> values('12/12/2006','12:23:04');
but it displays error at " ; "
can anyone help me to figure out the problem
Thanks a lot in advance.
Regards,
Sweety
I am trying to pull the records which are being affected i.e, comparing the values and if not same then populating the record.
I am using the below condition in where clause however i am getting runt time error as "Conversion failure when converting date and/or time from character string"
Condition in Where clause:
cast(isNull(tab1.Col1,'') as datetime) <> cast(isNull(tab2.col1,'') as datetime)Â
Note: Both col1 columns are of type nvarcharÂ
I have asp.net 1.1 web form and it inserts date and time in SQL database, but it insert only date not time , It insert date time in following format
2002-01-22 00:00:00.000
some one tell me why it is not inserting time or why it is inserting time as 00:00:00:000.
I want to my time to look like 14:42:51:153. (format)
How can I change my time format
give me asp.net codes for time formating or what do I need to do to resolve the problem,
thank you
maxmax
SELECTIndustry,
100.0 * SUM(CASE when ceoischairman = 'yes' then 1 else 0 end) / COUNT(DISTINCT CompID) AS [YesPercent],
100.0 * SUM(CASE when ceoischairman = 'no' then 1 else 0 end) / COUNT(DISTINCT CompID) AS [NoPercent]
FROMTCompanies
GROUP BYIndustry
ORDER BYIndustry
This code above is working as I need it but I need to insert some additional functionality. Thanks
I need to add something like this:
IF YesPercent > NoPercent
UPDATE tableX SET CEOIsChairman='Yes' WHERE Industry='<the industry value being evaluated>'
Else If NoPercent > YesPercent
UPDATE tableX SET CEOIsChairman='No' WHERE Industry='<the industry value being evaluated>'
Else
UPDATE tableX SET CEOIsChairman='Equal' WHERE Industry='<the industry value being evaluated>'
End
Hello, I'm trying to accomplish 3 things with one stored procedure.I'm trying to search for a record in table X, use the outcome of thatsearch to insert another record in table Y and then exec another storedprocedure and use the outcome of that stored procedure to update therecord in table Y.I have this stored procedure (stA)CREATE PROCEDURE procstA (@SSNum varchar(9) = NULL)ASSET NOCOUNT ONSELECT OType, Status, SSN, FName, LNameFROM CustomersWHERE (OType = 'D') AND (Status = 'Completed') AND (SSN = @SSNum)GO.Then, I need to create a new record in another table (Y) using the SSN,FName and Lname fields from this stored procedure.After doing so, I need to run the second stored procedure (stB) Here itis:CREATE PROCEDURE procstB( @SSNum varchar(9) = NULL)ASSET NOCOUNT ON-- select the recordSELECT OrderID, OrderDate, SSNFROM OrdersGROUP BY OrderID, OrderDate, SSNHAVING (ProductType = 'VVSS') AND (MIN(SSN) = @SSNum)GO.After running this, I need to update the record I created a moment agoin table Y with the OrderDate and OrderID from the second storedprocedure.Do you guys think that it can be done within a single stored procedure?Like for example, at the end of store procedure A creating an insertstatement for the new record, and then placing something like execprocstB 'SSN value'? to run stored procedure B and then having aupdate statement to update that new record?Thanks for all your help.
View 1 Replies View RelatedHi
Can anyone advise me as to how I can add the date and time to 2 columns in the sql server database for each record that is added. I'd prefer not to use the webform. Can sql server add the date automatically to the row?
thanks
Dear Expert!
A server with SQL 2005 sp2, Reporting Services and Sharepoint services (ver 3.0) (in integrated mode) gives an odd error. When viewing a Reporting Services report with a Date Time Picker, the date chosen is wrong. The preferred setting is Danish with the date format dd-mm-yyyy. The date picker shows the months in Danish but when selecting a date, and clicking on the Apply-button, the date reformats to US (mm-dd-yyyy).
Example:
When choosing 5th of September 2007 and clicking apply, it shows in the picker, 9th of May 2007.
When choosing 26th of September 2007 and clicking apply, it shows, again in US format, the RIGHT date but adds a timestamp €œ12:00 AM€? in the end, making further enquiries to fail.
The report itself receives the right date and shows correctly. The only case it fails is, when the time stamp appears.
The server is a 32-bit one with 4 GB RAM. A testserver with identical collation on the Reportserver database cannot recreate the error. The site containing the reports has been set to Danish in the regional settings. To Reinstall is not an option.
The test report has no database connection whatsoever.
When setting the site to US, the timestamp won€™t appear at all.
The server has been restarted and the installation procedure was of the simple kind. No special tweaks at all.
Any advice would be greatly appreciated.
Kind Regards
Johan Rastenberger
I have a webform that has 2 calendars that i use to insert a dateFrom and dateTo into a sql database table that has the type smalldatetime. When i insert into the database i get yyyy-mm-dd hh:mm:ss but i just want the yyyy-mm-dd not the time. how can i do this with my asp.net c# code? I also has a datetime.Now() that does the same thing.1 string dateNow = DateTime.Now.ToShortDateString();
2
3 string myConnectionString = @"Data Source=SRVWEB02SQLEXPRESS;Initial Catalog=strukton_se;User ID=user;Password=secret";
4
5 SqlConnection myConnection = new SqlConnection(myConnectionString);
6 string myInsertQuery = "INSERT INTO jobs (name, description, contact, datePosted, dateFrom, dateTo) Values(@name, @description, @contact, @datePosted, @dateFrom, @dateTo)";
7 SqlCommand myCommand = new SqlCommand(myInsertQuery);
8 myCommand.Parameters.AddWithValue("name", TextBoxName.Text);
9 myCommand.Parameters.AddWithValue("description", TextBoxDescription.Text.Replace("
", "<br/>"));
10 myCommand.Parameters.AddWithValue("contact", TextBoxContact.Text.Replace("
", "<br/>"));
11 myCommand.Parameters.AddWithValue("datePosted", dateNow);
12 myCommand.Parameters.AddWithValue("dateFrom", Calendar1.SelectedDate.ToShortDateString());
13 myCommand.Parameters.AddWithValue("dateTo", Calendar2.SelectedDate.ToShortDateString());
14
15 ButtonSubmit.Enabled = false;
16
17 myCommand.Connection = myConnection;
18 myConnection.Open();
19 myCommand.ExecuteNonQuery();
20 myCommand.Connection.Close();
Thanks.
I am wanting to populate a datetime field with data retrieved from 4 dropdowns month, day, year and hour 08:00 - 18:00.
I am having trouble joining them together in a format that the sql server recognises.
In the code below why does it not enter 10:00 AM but instead it enters: 1900-01-01 10:00:00.000 ?
Create Table MyDateTest
(
DateColumn datetime
)
insert into MyDateTest values ('10:00 AM')
select DateColumn from MyDateTest
--PhB
Hello,
I am using the calender parameter and I need to convert my data date format to the one that matched that is returned on selecting a date from this calender. Can you show me what this format is.
how can I convert my existing date format to this format. The existing date format is 2007-07-26 21:27:13.000
thank you
Kiran
In a select statement a date field contains 1/1/2004 3:00:00 AM.In my select statement how do I get the field to show as 1/1/04?
Thanks
I want to retrieve a date time field from SQL server. The format I want it to be retrieved is:
YYYY/MM/DD-hh:mm:ss:lll (l = millisec)
example '2006/06/21-15:26:39:994'.
Can somebody please tell me how to do it. I know how to do it in Oracle, but not in SQL server.
I need an SQL string that inserts the current date into a database.
So far I have tried:
SQL = "INSERT INTO X (START_DATE) VALUES ('" & Date.Now & "')"
mycomm = New SqlCommand(sql, myconn)
mycomm.ExecuteNonQuery()
However, there is a problem with the SQL command. The problem is related to the date. Is there a way of programatically inserting the current date/time into the SQL database? Language used is VB.
I am using a DAL and i want to insert a new row where one of the columns is DATE and it can be 'NULL'.
I am assigning SqlTypes.SqlDateTime.Null.
But when the date is saved in the database, i get the minvalue (1/01/1900) . Is there a way to put the NULL value in the database using DAL????how can i put an empty date in the database?
THANK YOU!!!
I have a table where the date and time stamp are logged together and I want to only show the date in a 10 character output. Also I want to return as blank some dates in the field that are 01/01/1800.
The current table format is 2013-06-28 00:00:00:000..I just want the date. I was using RTRIM function but it keeps erroring out.
Would it be possible to change the date time from varchar to datetime. it currently showing as varchar in the following format 20080401 0845
can it be changed to date/time format into something like this 01/04/2008 08:45. If someone could help that would be great. Many thanks
I am using below query to get the data and time+2 hrs
selectdateadd(hour, datediff(hour, 0, getdate()) + 2, 0)
getting results as like this
2014-10-30 13:00:00.000
but i don't need any dashes between dates i mean i am expecting results as shown below
20141030 13:00:00.000
Precisely, here's what I need:When I run getdate(), I get, for example:August 9 2004 5:17 P.M.I want to turn the date portion into:8/9/2004 format and update one column with itI want to turn 5:17 P.M. into:hhmmss and update another column with it.I've been playing around with datepart, with substr, with you name it,and I'm stumped.Any code samples, other help most appreciated.Thanks,Google Jenny*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedHi
I have many existing tables within my db with the date format mm/dd/yyyy
Is it possible to run a stored procedure in order to convert the EXISTING records to the date format dd/mm/yyyy?
Thanks
hi all
I have two date/time fields as below:
=(Fields!ClosedDate.Value)-(Fields!CreatedDate.Value)
result can sometimes look like this 14:01:42.3840000
how do I format this
I have tried
=FormatDateTime((Fields!ClosedDate.Value)-(Fields!CreatedDate.Value), 2)
but this gives an error
I want the result to look like this
14:01:42.38
thanks
Dianne
Hi,
I want to retrieve some parameter values from Reporting Services using GetReportParameters from
Microsoft.SqlServer.ReportingServices.ReportService2005.
It works fine unless the parameter types are date/time. In such a case it seems as if the format of the parameter depends on the ReportServices installation:
Example:
On a German installation the date/time format is "dd.mm.yyyy" but on an English installation the format is different (mm/dd/yyyy) (and of course the time part is also different).
Is there a way to determine the format to be expected? (... even in the case I've no knowledge about the server ReportingServices is running.)
Im working with a breaking system and I wont to convert the (FROM) datetime column to accept just time like (4:00:00 AM) without the date (7/23/2004) but it doesn’t have column format like the access ??
I found something in the SQL help :
How to convert the format of a Date Time String transformation (Enterprise Manager)
To convert the format of a Date Time String transformation
1.On the Transformations tab of the Transform Data Task Properties or Data Driven Query Task Properties dialog box, click the Source column containing the date or time to be modified, and then click the Destination column where you want the modified string to be placed.
2.Do one of the following:
•If there is a mapping arrow connecting the two columns, click Delete, and then click New.
•If there is no mapping arrow, click New.
3.In the Create New Transformation dialog box, click DateTime String.
4.Click the General tab, and then click Properties.
5.In the Date Format list, select the format you want.
6.Click Naming to display the Calendar Names dialog box, where you can select long or short day or month names and the A.M. and P.M. designators you want.
7.In the Language list, select the language you want, and then click Set Language Defaults.
But unfortunately I didn't find the "Transformations tab" I look a lot in the SQL Enterprise Manager
Do anybody work with the Transformations or at least know where is it please ???
I have a standard datetime and I need to convert it to the client specification of:
YYYY-MM-DDThh:mm:ssTZD
eg: 2009-04-16T19:20:30+08:00
I am not sure of the easiest way to do this.
The test code below gets me part of the way but I am unsure on how to get the offset on the end without hardcoding to much.
DECLARE @datetime DATETIME = '2014-12-20 12:30:00'
SELECT CONVERT(VARCHAR(30),@datetime,127)
hello all,
i am making a query which select the data again a particuler date.
I insert values in the table for with current date(Today's date) and the records is inserted with the date format(2006-07-14 16:12:09),now when i run the query after 2 or 3 minutes to select the records inserted today, my query returns no results.
I think it is because of the the time (14:16 in this case) that after 2 minutes, the query looks for the records inserted at (2006-07-14 18:12 or 2006-07-14 19:12) and does not get the result.
Is there a method to not consider the time(14:16) when running the query but the query fetches the records including the records inserted at this time(14:16) no matter at what time I run the query today?
Please anyone help me!
Thanks in advance!
I have two fields DSRHADTI which is an isodate and DSRHTIME which is 8 char time field in format 10.31.00. I want to take both these fields and put them into a field that is database timestamp so I have converted DSRHDATI to 10 character field. I am then trying to use substring to put both into 18 character field using derived column transformation editor. but it does not like the below. It's red syntax error what am I missing.
(SUBSTRING(Copy of DSRHDATI,1,4) +' /' + SUBSTRING( Copy of DSRHDATI,6,2) + '/ ' + SUBSTRING(Copy of DSRHDATI,9,2)) + SUBSTRING(DSRHTIME,1,2) + '.' + SUBSTRING(DSRHTIME,4,2) + '.' + SUBSTRING(DSRHTIME,7,2)
One I get the above to work I plan on convert 18 char to datetimestamp.
Am I on the right track on how to do this?
We are using an ADO.NET provider in SSIS to read data from a SQL Server 2000 table that contains DateTime columns to write to a Flat File Destination. When the date values are written to the file they are formatted in TimeStamp to the 10th decimal position; e.g.€œ2006-04-24 12:00:00.123000000€?. Since SQL Server supports values to Timestamp(3), we need to truncate the last seven zeros to put the data in this format €œ2006-04-24 12:00:00.123€? to keep the file as small as possible.
Since we have several hundred DateTime columns in scope for our requirements we are looking for the least logic/effort to accomplish this task. We can do this via Data Conversion and Derived Column transformations to cast the dates and strings but it is very labor intensive. It would be something like singing 99 bottles of beer on the wall eight times in a row with each verse taking 3 minutes each. Yikes.
We have tried casting the DateTime columns to varchar in the SELECT statement but receive this format €œApr 24 2006 12:22PM€?.
Is there a configuration we've missed that forces timestamp(10) with non significant digits?
what would be the TSQL in trying to create a new table with date-time format ending via a select into like:
select
*
into tblResults_
+
SELECT
CONVERT(VARCHAR(10),GETDATE(),112)
+
'_'
+
REPLACE(CONVERT(VARCHAR(10),GETDATE(),108),':','_')
from qryResult
I am trying to write a stored procedure that loops through the list of user tables, gets the record count for each one and write a record to an audit table with DATE, TABLENAME, RECORDCOUNT.I keep getting an error "Conversion failed when converting date and/or time from character string".Here is the script...
DECLARE @table nvarchar(500)
DECLARE @sql nvarchar(520)
DECLARE CursorSelect CURSOR FOR
select table_name from INFORMATION_SCHEMA.tables where table_name not like 'sys%' order by table_name
[code]....
As a DBA, I am working on a project where an ETL process(SSIS) takes a long time to aggregate and process the raw data.
I figured out few things where the package selects the data from my biggest 200 GB unpartitioned table which has a datekey column but the package converts its each row to an integer value leading to massive scans and high CPU.
Example: the package passed two values 20140714 and 4 which means it wants to grab data from my biggest table which belongs between 20140714 04:00:00 and 20140714 05:00:00.
It leads to massive implicit conversions and I am trying to change this.
To minimize the number of changes, what I am trying to do is to convert 20140714 and 4 to a datetime format variable.
Select Convert(DATETIME, LEFT(20170714, 8)) which gives me a date value but I am stuck at appending time(HH:00:00) to it.
E.g, i have a store procedure. The start date is long date (4/15/2007 3:00pm). i want to select the start date with a particular date (short date format 4/15/2006). Thanks in advance.
View 1 Replies View RelatedIs that possible to restrict inserting the record if record already exist in the table.
Scenario: query should be
We are inserting a bulk information of data, it should not insert the row if it already exist in the table. excluding that it should insert the other rows.
Working on a new database where the Date and Time are stored in a Date Time Field.
Then working on an OLDER database file within the same SQL Database contains these 2 items as integers:
transDate = "71615" (July 16, 2015)
transTime = "12345" (01:23:45 AM)
How do we convert both of them into a single SQL DateTime field such as "2015-07-16 01:23:45.000" so that it can be used in a join restricting to a date time in a different SQL File that properly has the DateTime in it?
This works well for converting the transDate Part in the select statement:
  dbo.IntegerToDate(at.transDate) as transDate
  * That returns: "2015-07-16 00:00:00.000"
* The resulting data must work directly in a Microsoft SQL Server Management Studio Query using either using the "on" statement or part of the "where" clause. In other words, NOT as a stored procedure!
Also must be able to be used as a date difference calculation when comparing the 2 files Within say + or - 5 seconds.