hello
I use SQLServer2000 when i begin a transaction and update set of records in a table
till i don't commit or rollback the transaction nobody can not select
previous values of that records and it must wait until i complete the transaction, i have tested it in oracle but it hasn't this limitation
don't you think it is Sqlserver weakness?
thanks
Hi All
I'm getting this when executing the code below. Going from W2K/SQL2k SP4 to XP/SQL2k SP4 over a dial-up link.
If I take away the begin tran and commit it works, but of course, if one statement fails I want a rollback. I'm executing this from a Delphi app, but I get the same from Qry Analyser.
I've tried both with and without the Set XACT . . ., and also tried with Set Implicit_Transactions off.
set XACT_ABORT ON
Begin distributed Tran
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1 and DONE = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
COMMIT TRAN
It's got me stumped, so any ideas gratefully received.Thx
I have a design a SSIS Package for ETL Process. In my package i have to read the data from the tables and then insert into the another table of same structure.
for reading the data i have write the Dynamic TSQL based on some condition and based on that it is using 25 different function to populate the data into different 25 column. Tsql returning correct data and is working fine in Enterprise manager. But in my SSIS package it show me time out ERROR.
I have increase and decrease the time to catch the error but it is still there i have tried to set 0 for commandout Properties.
if i'm using the 0 for commandtime out then i'm getting the Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
and
Failed to open a fastload rowset for "[dbo].[P@@#$%$%%%]". Check that the object exists in the database.
Please help me it's very urgent.
I am getting this error :Distributed transaction completed. Either enlist this session in a new
transaction or the NULL transaction. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.OleDb.OleDbException: Distributed transaction completed. Either
enlist this session in a new transaction or the NULL transaction.have anybody idea?!
i have a sequence container in my my sequence container i have a script task for drop the existing tables. This seq. container connected to another seq. container. all these are in for each loop container when i run the package it's work fine for 1st looop but it gives me error for second execution.
Message is like this:
Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
Hi,
i am getting this error "Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.".
my transations have been done using LINKED SERVER. when i manually call the store procedure from Server 1 it works but when i call it through Service broker it dosen't work and gives me this error.
Thanks in advance.
I'm troubleshooting a performance issue , Looking at Profiler - for the given statement, I'm getting the following figures , why would there be such a disparity between the figures. ? How can I go about finding out why there is such difference?
SQL:Stmt Completed:CPU = 31, Reads = 129 , Duration = 32
SQL:Batch Completed: CPU = 2531, Reads = 6087 , Duration = 2593
Jack Vamvas
--------------------
Search IT jobs from multiple sources- http://www.ITjobfeed.com
SELECT
#followups.suspectid,
#followups.planid,
cond4,
cond5,
cond6,
cond7,
cond8,
tbpdmmembers.firstname tbpdmmembers_firstname,
dbo.GetMemID_PartC_D(#followups.hic,#followups.IsPart_C) tbpdmmembers_MemberID,
--tbpdmmembers.Plan1 tbpdmmembers_MemberID,
tbaddress.address1 tbaddress_address1,
tbaddress.address2 tbaddress_address2,
tbaddress.city tbaddress_city,
tbaddress.state tbaddress_state,
tbaddress.zip tbaddress_zip
from #followups
I want to check if the tbaddress.address1 tbaddress_address1 if it is =null or empty then make it = tbaddress.address2 tbaddress_address2, at the same time I make the tbaddress.address2 tbaddress_address2, null. Otherwise leave it as it is.
Actually, I am working with the report and the tbaddress.address1 carrying the apt number. if there is no aprt # then the line print blanks. so that brings the empty line between the street address and the citystate line.
That is what i am tryig to cover. There could be a way to do this from the crystal report but I am thinking of doing this way cause I can't get the solution to do it from the crystal report.
I have a situation where deleting old records is blocking updating latest records on highly transactional table and getting timeout errors from application.
In details, I have one table called Tran_table1 in OLTP database. This Tran_table1 is highly transactional table, it will receive data for insert/update continuously
While archiving 2 years old records from Tran_table1 into Tran_table1_archive in batches(using DELETE OUTPUT INTO clause), if there is any UPDATEs on Tran_table1,these updates are getting blocked and result is timeout errors in application.
Is there any SQL Server hints to avoid blocking ..
Hi all,
I copied the following code from Microsoft SQL Server 2005 Online (September 2007):
UDF_table.sql:
USE AdventureWorks;
GO
IF OBJECT_ID(N'dbo.ufnGetContactInformation', N'TF') IS NOT NULL
DROP FUNCTION dbo.ufnGetContactInformation;
GO
CREATE FUNCTION dbo.ufnGetContactInformation(@ContactID int)
RETURNS @retContactInformation TABLE
(
-- Columns returned by the function
ContactID int PRIMARY KEY NOT NULL,
FirstName nvarchar(50) NULL,
LastName nvarchar(50) NULL,
JobTitle nvarchar(50) NULL,
ContactType nvarchar(50) NULL
)
AS
-- Returns the first name, last name, job title, and contact type for the specified contact.
BEGIN
DECLARE
@FirstName nvarchar(50),
@LastName nvarchar(50),
@JobTitle nvarchar(50),
@ContactType nvarchar(50);
-- Get common contact information
SELECT
@ContactID = ContactID,
@FirstName = FirstName,
@LastName = LastName
FROM Person.Contact
WHERE ContactID = @ContactID;
SELECT @JobTitle =
CASE
-- Check for employee
WHEN EXISTS(SELECT * FROM HumanResources.Employee e
WHERE e.ContactID = @ContactID)
THEN (SELECT Title
FROM HumanResources.Employee
WHERE ContactID = @ContactID)
-- Check for vendor
WHEN EXISTS(SELECT * FROM Purchasing.VendorContact vc
INNER JOIN Person.ContactType ct
ON vc.ContactTypeID = ct.ContactTypeID
WHERE vc.ContactID = @ContactID)
THEN (SELECT ct.Name
FROM Purchasing.VendorContact vc
INNER JOIN Person.ContactType ct
ON vc.ContactTypeID = ct.ContactTypeID
WHERE vc.ContactID = @ContactID)
-- Check for store
WHEN EXISTS(SELECT * FROM Sales.StoreContact sc
INNER JOIN Person.ContactType ct
ON sc.ContactTypeID = ct.ContactTypeID
WHERE sc.ContactID = @ContactID)
THEN (SELECT ct.Name
FROM Sales.StoreContact sc
INNER JOIN Person.ContactType ct
ON sc.ContactTypeID = ct.ContactTypeID
WHERE ContactID = @ContactID)
ELSE NULL
END;
SET @ContactType =
CASE
-- Check for employee
WHEN EXISTS(SELECT * FROM HumanResources.Employee e
WHERE e.ContactID = @ContactID)
THEN 'Employee'
-- Check for vendor
WHEN EXISTS(SELECT * FROM Purchasing.VendorContact vc
INNER JOIN Person.ContactType ct
ON vc.ContactTypeID = ct.ContactTypeID
WHERE vc.ContactID = @ContactID)
THEN 'Vendor Contact'
-- Check for store
WHEN EXISTS(SELECT * FROM Sales.StoreContact sc
INNER JOIN Person.ContactType ct
ON sc.ContactTypeID = ct.ContactTypeID
WHERE sc.ContactID = @ContactID)
THEN 'Store Contact'
-- Check for individual consumer
WHEN EXISTS(SELECT * FROM Sales.Individual i
WHERE i.ContactID = @ContactID)
THEN 'Consumer'
END;
-- Return the information to the caller
IF @ContactID IS NOT NULL
BEGIN
INSERT @retContactInformation
SELECT @ContactID, @FirstName, @LastName, @JobTitle, @ContactType;
END;
RETURN;
END;
GO
----------------------------------------------------------------------
I executed it in my SQL Server Management Studio Express and I got: Commands completed successfully. I do not know where the result is and how to get the result viewed. Please help and advise.
Thanks in advance,
Scott Chang
HI,
I have been trying to solve the locking problem from past couple of days. Please help mee!!
Scenario:
--------------
I have a SSIS package in which 2 data flow tasks. 1st data flow task deletes records from a 5 tables and the 2nd data flow task should insert records into 1 of the five tables after the success of 1st data flow task. This scenario runs in Transacation.
The above scenrio in the 2nd data flow task hangs in runtime. It does not complete. with sp_who2 command i could see that there is an intent share lock(LK_M_IS) on the table and the status is SUSPENDED.
I dont know how to come out of this locking. Please help.
Thanks ,
Sunil
Hi
In a transactions table, I need to get the record for the earliest transaction date for each person or account. So far I've been doing it in 2 steps (below). Is there an easier way to do this?
Thanks
Dannie
--------------------------
SELECT
Person_ID
Earliest_Transaction_Date = MIN( Transaction_Date )
INTO
Earliest_Transaction_Dates
FROM
All_Transactions
GROUP BY
Person_ID
SELECT
b.*
FROM
Earliest_Transaction_Dates a
LEFT OUTER JOIN
All_Transactions b
WHERE
a.Person_ID = b.Person_ID
and b.Transaction_Date = a.Earliest_Transaction_Date
I want to list out the pending transaction for transaction replication by publication.
Help needed.
Table1 contains fields Groupid, UserName,Category, Dimension
Table2 contains fields Group, Name,Category, Dimension (Group and Name are not in Table1)
So basically I need to read the records in Table1 using Groupid and each time there is a Groupid then select records from Table2 where Table2.Category in (Select Catergory from Table1)
and Table2.Dimension in (Select Dimension from Table1)
In Table1 There might be 10 Groupid records all of which are different.
I have a database which has a field called fldTimes. basically this field records the number of hits a file gets. How can I choose the most 5 popular files with the greatest hits. Thanks
View 2 Replies View RelatedIs it possible to use a SELECT to retrieve a Next 50 set of records?
Initial Query
Select top 50 email from table
What would the Query look like to retrieve the Next 50 records?
Thanks in advance.
This might be a simple question. I have a LIKE statement that is working fine, however I am not sure if something else is possible.
I can pull all records on a query for a person's name with a parameter value of "MARTIN". It will also pull records for "LYNN MARTIN". However, what if I would like to have that search also pull "LYNN M MARTIN"? Currently "LYNN MARTIN" is not finding "LYNN M MARTIN".
When the end user wants to search on LYNN MARTIN and that is what they input, I want SQL to find all records that match LYNN MARTIN and also find records that HAVE LYNN % MARTIN.
I hope this make sense? I guess I need to build my select statement using a WHERE LIKE statement, but I am not sure of the syntax.
Hi,
I'm just wondering if someone can help me with some SQL syntax stuff.I want to take this sql statement:
"SELECT TOP 50 tblProfile.chName, tblProfile.intCount FROM tblProfile, tblLinks WHERE (tblLinks.MemberID = tblProfile.MemberID) ORDER BY tblLinks.dtDateAdded DESC;"
and select only unique "chName's" records
Hello Everyone and thanks for your help in advance. I have a SQL Server Table wtih approximately 100,000 records. I need to determine if there are duplicate records in this table. My probelm is that there is a unique ID column that was added for each row, so I'm not exactly sure how to filter the rows. Any help on this would be greatly appreciated. Thanks.
View 4 Replies View RelatedI'm looking for a bit of SQL code that will select some entries randomly from an SQL table.
For instance I'd like to feed a parameter in that contains the number
20, and the returned record contains 20 randomly and distinct selected
records.
Anyone know how this can be done? (never came across randomly select records) Appreciate any help
hi again,
i just want to ask if how can i randomly select 5 distinct records from a table w/ a hundreds of records everytime i exec a stored procedure??
thanks
I have a reviews table where all reviews are submitted. On the main page I want to display the 10 most reviewed products. I have a Product_ID column in this table which identifys the product. How can i write a query which will select the product_ID of records which have the most frequent product_ID's?
I came up with something like this:
"Select Top 10 Product_ID, COUNT(*) AS Occurances FROM reviews GROUP BY Product_ID ORDER BY occurances DESC"
But it does not work.?? It says "Declaration expected" as error
Hi, my sql is not too hot so i hope someone can help me. I need to select all the records from one table that do not exist in 2 other tables. I know it sounds simple enough but for some reason i can not get it working. It may have something to do with the fact that the field i am searching on are datetime fields. Here is a shortened version of my code.
SELECT DateOfStats
FROM table1
WHERE (DateOfStats NOT IN
(SELECT dateofstats
FROM table2)) and (DateOfStats NOT IN
(SELECT dateofstats
FROM table3))
Thanks for the help in advance.
I have a mssql database like this:
Table1:
ID GuestName Agent CheckInDate OtherColumn
1 Guest 1 Peter 1/11/2005 whatever
2 Guest 2 Peter 1/11/2005 whatever
3 Guest 3 John 1/11/2005 whatever
4 Guest 4 John 1/13/2005 whatever
5 Guest 5 Peter 1/11/2005 whatever
I want to display it group by same Agent and CheckInDate. Like this:
Agent CheckInDate Records
Peter 1/11/2005 3
John 1/11/2005 1
John 1/13/2005 1
How can I do this? Please help, thank you.
i need to select records from table "A" if only the "PK" of "A" exists in table "B". I need to return a resultset not just a single record. The problem is table "B" is not a table in database instead a user supplied table which can be a datatable in memory.
View 2 Replies View RelatedI was given this query but could not build it successfully.
can anybody help me out.
Consider the following scenario:
we have a table with single field of type Varchar(100).
we have few hundred records in it.
we want to retrieve last 'n' records from table.
i know this is bad idea but we need to have some solution to work it out.
i'm breaking my head but to no use.
Please help
How would I create a statement that would select 10 random records from the SQL DB?
View 5 Replies View RelatedHi,
Here is a basic example of the issue I am having:
Table 1 columns - name, address, zipcode, favorite food
For table 2 I want to find how many zipcodes exists and also take 20% of the count
Table 2 columns - based off Table 1 contains zipcode, count(zipcode) as ct, count(zipcode) * .20 as perc_ct
For example:
zipcode ct perc_ct
83746 10 2
93847 20 4
I want to run a query that will pull any 2 records for 83746 and any 4 records for 93847 from Table 1.
Is this possible?
What I need is the start and end time of each task, but the issue is there is no unique task number to bind them together.. So for instance the task starts with 'Open-Submitted' and ends with 'Task Approved'. The issue is there can be multiple occurrences in the same file number. I need to be able to split these into multiple tasks with the associated start and stop times.
File IDDatetimesTask Event StatusTask Event NameTask IDEvent ID
File 16/3/13 16:33Open-SubmittedTask is retrievedTSK-12345612345
File 16/3/13 16:44Open-ApprovedTask ApprovedTSK-12345623456
File 16/20/13 18:11Open-SubmittedTask is retrievedTSK-12345634567
File 16/21/13 14:42Open-ApprovedTask ApprovedTSK-12345645678
I am trying to create a select query similar to the following but the problem I am having is that I want to only select one record where there may be several with the same dw_order_no. I have tried various ways using SQL developer but without success
SELECT VE_EZP_ORDER_TRANS.EZP_BILL_STATUS AS EZP_BILL_STATUS1,
VE_EZP_AGED_CUSTOMER_DEBT.SURNAME,
VE_EZP_AGED_CUSTOMER_DEBT.DEBT_AGE_CATEGORY,
VE_EZP_AGED_CUSTOMER_DEBT.DEBT_AGE,
VE_ORDERLINE.DW_ORDER_NO,
[code]...
I am having trouble selecting only one record in a list with a sequence, example:
name addseq address
================================
bob, doe 1 123 str.
bob, doe 2 456 ave.
jane, doe 1 789 blvd.
What I want to do is select the records that are current which would be:
name addseq address
================================
bob, doe 2 456 ave.
jane, doe 1 789 blvd.
Please help with some ideas.
Thanks
Is there a way to see a list of duplicate records??
EG There is a field named "Invoice" in a table named "Orders" and I want to see only records where the same invoice shows more than once.
Sample output:
Invoice--Partno
123------a66
123------9pp
123------k33
5988-----j22
5988-----bx1
66-------pq1
66-------333
etc......
Thanks
Mike
Good Morning,I have a view that contains rate information, contractIDs, and effectivedates.I need to select the rate info based on contractID and date.I can provide a date and contractID, and I need to select the rate info forthat contract where the effective date is <= dateprovided.I need the 1 record that is closest to that date.I am thinking something with max() perhaps. Any ideas? The <= effectivedate will return several rows, I just need the one closest to the date Iprovide.Thanks for any advice,CK
View 2 Replies View Related