Problem Setting Package Properties From Dtexecui
May 17, 2007
I want to input a parameter to my package. I have a variable, and I tried changing its value from DTExecUI.
I did everything as mentioned in http://blogs.conchango.com/jamiethomson/archive/2007/03/13/SSIS_3A00_-Property-Paths-syntax.aspx but I still get an error -
Could not set "Package.Variables[User::var_input_step_Name].Properties[Value]" value to "RAW".
The variable was originally read from a XML config file. I stored the package to MSDB. I then ran dtexecui, selected my msdb package, and in Set Values, I entered property path and value. I also tried removing the "", and I even deleted the XML configuration. Still the same error.
What am I doing wrong? Any Package Settings to make?
TIA
Kar
View 4 Replies
ADVERTISEMENT
Nov 7, 2006
Hi,
when i deploy my package using the DTExecUI thru the Package Execution Utility.when we execute the package . we are getting the following error.
The Product Levelis insufficient for component "Flat File Source(1)"
the package design is
FlatFileSource ----> OlEDBDestination
what could be the solution for this?
Thanks
Jegan
View 3 Replies
View Related
Jan 30, 2007
I used to do this in DTS but wondered how to do it in SSIS. I have a For Each ADO recordset loop that reads these four columns into variables:
DataSource Name, Name(for a WHERE clause), user and password.
For each "Building" there is a new server to connect to, with identical tables. I have 10 tables in the loop to pump from one database to a SQL 2005 database (i.e. 10 dataflows). I want to set the source connection information with the variables. My questions:
1. How do I set the connection information for the source connections? Do I just set the properties for the connection manager and then it sets for all the sources? What property do I set--do I need a script task?
2. How do I use the values from the "Name" column in a WHERE clause in each data flow?
Thanks!
Kayda
View 4 Replies
View Related
Apr 13, 2007
Hello,
Is it possible to establish a set of default report and report body properties, perhaps in an ini file of some sort so that upon creating a new project and adding a new report item the developer does not have to go through the process of setting up all the interactive sizes, margins, paper sizes, etc each and every time? We have an established header that we incorporate on all reports and while in transition to the new Reporting Services it was my hope of finding something will create the first set of default conditions to help us automate the process just a bit.
Thank you.
View 2 Replies
View Related
May 2, 2007
Hi there.
I'd like to call dtexec with something like this:
dtexec /f myPackage.dtsx /Set package.variables[User::connStr].Value;Source=localhost;Provider=blah;Integrated Security=SSPI;
I get an error along the lines of
Option "Source=localhost;Provider=blah;Integrated" is not valid".
How do I pass in a property containing spaces? I've tried all of the usual quote-encasing patterns I can think of.
Thanks,
Jon
View 5 Replies
View Related
Jul 10, 2007
Hi
I have a package which contains a foreach container. Can anyone help me in setting the properties for the enumerators programmatically??? I am trying to set the properties for the enumerator "ForEach File Enumerator"
The properties which i need to set are
1. Folder
2. File Type
3. Traverse Subfolder
4. Retrieve File Name
Thanks in Advance
Suganya
View 1 Replies
View Related
Jun 29, 2006
I am using execute pacakge task to execute another package . I am giving the Connection string for the package to execute. It works fine in my development machine but when i try to run in another server after i deployed it. It looks for the datasource path of the DTSX file in the same location.
how do i set the path according to each server where the dtsx file is stored. or any other method of storing it like connection string.
if i store it in theparent package variable where should i point to...
thanks
aa
View 1 Replies
View Related
Sep 8, 2006
Hi,
I am making use of the DtUtil tool to deploy my package to SQL Server.
Following is my configuration:
32-bit machine and 32-bit named instance of Yukon.
I have some package variables which need to be set in the code.
Previously I did it as follows:
Set the package variables in the code. For example:
pkgFile.Variables["User::DestinationServerName"].Value = <myvalue>
Deploy the package as follows:
applnObj.SaveToSqlServer(pkgFile, null,
destinationServer, null, null);
Here the package was successfully deployed and when i open those packages using BIDS, I am able to see that the variables are set to the values as doen in teh code.
Because of oen problem I am not using SaveToSQLServer method. So I switched to DTUtil tool.
Now I am doing it this way:
Set the package variables as before.
Deploy the package to SQL Server using DTUtil tool.
Now is the problem:
The package is successfully deployed. But the variables are not set to the value that I have specified in the code.
I also tried DTexec utility to set the package variable. Even that does n't work.
Can anyone help me out? Is there any alternate method to set package variables?
Thanks,
Sandhya
View 8 Replies
View Related
Sep 26, 2000
Is it possible to change the database name defined in the destinatation table definition of the transformation object programmitacally?
We have different database names between dev and prod. The package was created against dev. I'm trying to copy the package to the prod server and programmatically change the database name where necessary.
View 4 Replies
View Related
Feb 27, 2001
Has anybody used the "Use fast load" or "Table lock" options in the advanced DTS package properties ? These are supposed to be in the Advanced tab of the Data Transformation Properties dialog box. I cannot seen to find them. I want to set them in order to have the load execute in nonlogged mode. Any help would be very much appreciated.
Thanks in advance.
View 2 Replies
View Related
Nov 7, 2007
Hi
We have a list of 40-50 SSIS packages and could grow up to 100. Each one loads 5-20 tables. I’d like to write a program (probably another package utilizing "Script task/component") to:
1- List all the packages by name
2- List input and output tables and/or file systems for each package
3- List child packages and procedures that are referenced in each package
So I need to have access to the Package properties.
I would like to hear your idea/clue/tips and or any helpfull direction.
Thanks so much.
View 4 Replies
View Related
Dec 19, 2006
Creating a SQL Agent job to run a package works just fine. On the Step Properties, Set values tab, I can add variables and the values I want for them, no problem. The job runs just fine. If I want to go edit the values however, they're always gone.
Is there some security setting that hides the variables and their values which is on by default?
View 1 Replies
View Related
Mar 27, 2006
I'm currently trying to convert over packages from SQL 2000 to SQL 2005. The biggest obstacle at the start has to do with converting my "Dynamic Properties" control. I use it to read an .ini file and load the user name and password to my connections. With 2000 it's nice and easy 1 file 3 lines. While trying to convert it I€™ve had nothing but problems. I've tried the Registry Entry but it forces everything into the Current User and I can't use that I need local machine. There is no documentation and I can't have a xml file with 1000 different username and password settings because 1 person has to update that file with the new passwords. Any help would be GREATLY appreciated.
Thank You
Jerry
View 23 Replies
View Related
Mar 2, 2007
I am attempting to run an SSIS package from a web service. Right now both the service and package are on my local machine which is running XP. I have accessed the web service from a client application in debug mode. I am not sure if it is actually running under aspnet_wp.exe because it is XP and a development environment? (separate question)??? The package fails with a series of OnError messages similar to:
The result of the expression ""/c DEL /F /Q "" + @DeployFolder + "\catalog.diff.lz""" on property "Arguments" cannot be written to the property. The expression was evaluated, but cannot be set on the property.
An initial supposition is that the permissions of the web service are inadequate for the package. I have the authentication as "Windows" and <identity impersonate="true" /> in the Web.Config file. When I break in the debugger the Environment.UserName and Environment.UserDomainName are mine and I am an Admin on the box.
the authorization is 'deny users="?".
The article that describes basic implementation of this in a Web Service states:
With its default settings for authentication and authorization, a Web
service generally does not have sufficient permissions to access SQL
Server or the file system to load and execute packages. You may have to
assign appropriate permissions to the Web service by configuring its
authentication and authorization settings in the web.config
file and assigning database and file system permissions as appropriate.
A complete discussion of Web, database, and file system permissions is
beyond the scope of this topic.
And how!
Note that the load is fine and that this is a run time error and that the package runs correctly when run manually from SQL Server using the 'run package' menu item in the Object Explorer tree of the SQL Server Management Console.
I need to know if this is an ASP.NET issue per se or XP or if this is even a security issue. And how to solve it! This is critical path so an expeditious reply with a solution would be greatly appreciated.
View 1 Replies
View Related
Nov 29, 2006
When I try to run a .dtsx file or even the Dtexecui.exe I get following error:System.IO.FileNotFoundException.
Thanks
Bill
View 1 Replies
View Related
Dec 26, 2007
Hi all,
I have a DTEXECUI.exe related question. This util is installed on our QA server, but not our dev-server. Is this optional during installation? I can't ask our admin, he's on vacation.
Maybe important to note, is that the QA-server runs on 64 bit, where as the other servers are only 32-bit..
Regards & Season greetings,
T.
View 4 Replies
View Related
Feb 7, 2007
Is there an option(s) that will allow me to reduce the amount of output to the Package Execution Progress window? My package has a number of steps, but trying to keep track of progress is difficult at best given the deluge of messages this window displays.
I would prefer output similar to the SQL Import/Export wizard, which shows executing tasks on a single line with a status and a link to any error messages off to the side. Is this available somehow, or do I have to build it myself?
Thanks, any help appreciated.
View 2 Replies
View Related
Oct 25, 1999
How can I set a global var in another DTS package from inside the one I'm excuting. An example would be that I have in package #1 an ID that gets assigned, and it executes package #2 which needs the ID from the previous package.
Thanks,
Todd
View 1 Replies
View Related
Mar 28, 2007
I've used t-sql code like this to dynamically create jobs that perform specific tsql commands, including calling stored procedures
However, I'd like to create a dynamic job that runs a step that's running an SSIS package.
EXEC msdb..sp_add_job @SQLjobname
EXEC msdb..sp_add_jobserver @job_name =@SQLjobname , @server_name = @jobserver
EXEC msdb..sp_add_jobstep @job_name = @SQLjobname, @step_name = 'CPM.command'
EXEC msdb..sp_update_jobstep @job_name = @SQLjobname, @step_id = 1, @database_name = @db,@command = @commandin
I was wondering, is it possible to dynamically (in code) rather than setting the command that a job step is performing, to instruct the job step to perform a type Package? I noticed the command line setting for the step looks like this when it's a package:
/SQL "mypackage" /SERVER AMMIA01DEV04 /MAXCONCURRENT " -1 " /CHECKPOINTING OFF
However, if change the step type, the step fails. I don't see a type option on sp_update_jobstep and wonder is that subsystem?
As another option, I could instruct the job step to run the package through cmd shell but then wonder if that will run asynchronosly and if errors will be retained in the job. I'm not favoring that option.
View 1 Replies
View Related
Mar 16, 2015
I have an ODBC connection string that is working fine with the following properties:
Database="XXXXXXX",Network="YYYYYY"; strangely no server is specified in the string, but it is specified in the ODBC Connection file.
I am trying to do a new server registration in SSMS for this database.However, I don't understand where the network spec is placed.
Under Registered server name I've tried:
YYYYYYXXXXX
When I browse the server for the database instance list, I receive "network path was not found".
I even tried:"XXXXXXX",Network="YYYYYY" for the registered server name.Same error message.
What am I doing wrong ?
View 1 Replies
View Related
Oct 31, 2007
I have a very simple SSIS package that reads an environment variable, assigns it to a variable that is sent in an email, and also logs it to a text file. If I execute the package on the server via DTExecUI, it works fine as expected. However, if I schedule it as part of a job, I get the following error:
Code: 0x00000002 Source: Script Task Description: The script threw an exception: Object reference not set to an instance of an object. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 9:08:00 AM Finished: 9:08:01 AM Elapsed: 0.859 seconds. The package execution failed. The step failed.
The script is as follows:
Imports System
Imports System.Data
Imports System.IO
Imports Microsoft.SqlServer.Dts.Runtime
Public Class ScriptMain
Public Sub Main()
Dim Path As String = "C:TestEnv.txt"
Dim Env As String = Environment.GetEnvironmentVariable("SSISConfig").ToString()
Dim Sw As StreamWriter
Dts.Variables("SSISConfig").Value = Env
If File.Exists(Path) = False Then
Sw = File.CreateText(Path)
Else
Sw = File.AppendText(Path)
End If
Try
Sw.WriteLine(Env)
Finally
Sw.Close()
End Try
Dts.TaskResult = Dts.Results.Success
End Sub
End Class
I have puttered with this for a while now and can't figure out what the problem is. Any ideas?
View 12 Replies
View Related
Nov 12, 2007
I installed SP2 yesterday on our production server. I had some
problems with that but it seemed to have installed so that the Datbase
engine and the Integration Services is patch at least.
But after the update we can no longer bring up the "properties" of
SSIS packages. If we connect to the integration service and choose run
package the GUI just wait for a while and then nothing happens. We get
an error in the event log thou ..
Event Type: Error
Event Source: .NET Runtime 2.0 Error Reporting
Event Category: None
Event ID: 5000
Date: 2007-11-12
Time: 10:51:07
User: N/A
Description:
EventType clr20r3, P1 dtexecui.exe, P2 9.0.242.0, P3 45cd726d, P4
microsoft.sqlserver.manageddts, P5 9.0.242.0, P6 45cd7534, P7 21, P8
14, P9 qg0f5oshpmqbs2pm34uokrbhqqrfhscr, P10 NIL.
Anyone can make any sense of that?
If we open a package that we have scheduled in the SQL Agent we get an
error messages saying "No description found" .. really strange stuff
is going on here ..?
Please, any help would be appreciated ..
View 8 Replies
View Related
Dec 12, 2006
Hi,
I am trying to find a feature- that was there in DTS but I can't locate it in SSIS
Using DTSRUNUI, we could generate a encrypted command line for executing the pacakge. Now using DTEXECUI, I can get the command line but is there any way in which I can get it in the encryted format??
Thanks.
View 3 Replies
View Related
Feb 15, 2008
Hi,
If this is the syntax to set a property in a package using dtexec:
/set PackageMyForEachLoopMyDataFlow.Disable;False
What is the syntax for setting a global variable in the package?
Thanks
View 1 Replies
View Related
Jan 8, 2008
I'm in the process of creating a series of packages to do the ETL for a datawarehouse. As such, I've got quite a few DataFlow tasks scattered through them.
The problem I'm coming across is where the disk that the temp files (created during the processing) are put on is short of space (when compared to some of the data sets I'm copying around and noting that it's the System disk, not the "Data Drive").
To get around this, I found number of article scattered around that suggested using the BufferTempStoragePath property of the DataFlow tasks to redirect the temp files to somewhere else. This works fine for the tasks that I hard-code the new directory.
Noting the number of these tasks that I want to redirect, and also that the Dev environment will be different to the Production environment (and I have no control over the drive letters, paths, etc, in Prod), it was suggested that a package variable be created, assigned to the property and then said variable could be exposed via the Package Configuration file.
That's great as far as it goes, but I just cannot, for some reason, make it work.
The xml in the config file is:
<Configuration ConfiguredType="Property" Path="Package.Variables[::BufferTempStoragePathValue].Properties[Value]" ValueType="String">
<ConfiguredValue>D:Temp</ConfiguredValue>
</Configuration>
The property in the DataFlow task is then set to: @BufferTempStoragePathValue.
When the package is executed, it logs the error message "The buffer manager cannot create a temporary storage file on any path in the BufferTempStoragePath property. There is an incorrect file name or no permission."
My question for the group is two-fold: 1) what am I doing wrong in the setup of the property/variable, and 2) what are the security permissions that are required for the (new) folder.
It's got to be something obvious, I just can't see what!
Many thanks for your assistance.
Cheers,
Mike
View 6 Replies
View Related
Jun 2, 2006
In a script task, I prompt the user for some parameters. I use the System::InteractiveMode variable to tell me if the package was launched via user interaction or from an automated process such as a file watcher. I display the prompts only if System::InteractiveMode is true. When I run from VS 2005 then I get the prompts, and when the package runs automated (dtexec) the prompts are not shown, so all is OK. However, when the package is run from dtexecui, I do not get the prompts because it seems the InteractiveMode value is false. Shouldn't the InteractiveMode value be true when the package is run from dtexecui since it is a user interface?
View 3 Replies
View Related
Feb 26, 2008
I am trying to understand the relationship of setting package configurations and setting variable values during job scheduling. I understand that I can select variables that I want to manipulate at run time using package configurations. I understand that the configuration file is an xml file that the job can be told to access at run time. Here are my questions:
1. Once I create a configuration file, do I physically modify the file to change the variable that is input at runtime?
2. Do I have to select the config file and then change the value using the Set values tab?
3. What is the relationship between the config file and the set values tab?
4. When creating a package configuration, when would you use the options other than XML configuration file?
View 8 Replies
View Related
Oct 19, 2006
Hi,
I am trying to execute a DTS on sql server 2000 using the "Execute DTS 2000 Package Task".
I can see the inner variables and when I set the values everything works fine.
Now I want to pass the values dynamically. How can I achieve this?
Many thanks
View 9 Replies
View Related
Aug 28, 2007
I've worked for awhile to get an SSIS package that connects to Oracle to succesfully run via DTExecUI from a 64 bit SQL Server. I completely understand that DTExecUI runs in 32 bit mode, but I need to initiate the package from a stored proc so I need to be able to utilize the 32 bit DTExec from either a xp_cmdshell call or from an sp_start_job (thanks to MatthewRouche for the suggestion). Both Ora92 and 10g were installed on the SQL Server.
Here's what I've tried unssuccessfully
1. SQL Job - Just calling the package from an SSIS step. I wouldn't expect this to run because it is 64 bit DTExec.
2. SQL Job - A job that calls the 32 bit version of dtexec from cmdexec. Here is 2 examples I have tried, the first is because I came across several postings saying that there is a problem with the "(x86)" for the Oracle driver.
\server_nameE$ProgramFilesLegacyMicrosoftSQLServerX8690DTSBinnDTExec.exe /DTS "PackageName" /SERVER "SERVER_NAME" /SET Package.Variables[PLT].Value;"8H" /CONFIGFILE "\SERVERConfigFile.dtsConfig" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING EW
\server_nameE$Program FilesMicrosoft SQL Server (x86)90DTSBinnDTExec.exe /DTS "PackageName" /SERVER "SERVER_NAME" /SET Package.Variables[PLT].Value;"8H" /CONFIGFILE "\SERVERConfigFile.dtsConfig" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING EW
Both of these give me the error below:
System.Exception: System.Data.OracleClient requires Oracle client software version 8.1.7 or greater.
I'm assuming that it is running in 32 bit mode because this was at the beginning of the job history log:
Executed as user: "XXX". ....3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved
3. I then tried to call the package from a batch file on a file server that had integration services installed on. Got the same error as above.
I'm obviously missing something if I can get it to work in DTExecUI but not DTExec 32-bit.
Any ideas? Below are some postings I have already visited several times:
Windows 64 bit and Oracle
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=358365&SiteID=1
Connecting to Oracle on 64-bit (x64) machine
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=159581&SiteID=1
One paragraph that stands out on this posting is:
Find the location of the application that is generating the error. Check the path to this location and see if it contains any parenthesis. If so, you must relocate the application to a directory without any parenthesis in the path.
This didn€™t work for me, unless I was doing it wrong.
Error retrieving numeric data from Oracle 10g on 64 bit Itanium SSIS server
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1183296&SiteID=1
Connection Problems to Oracle Database
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1307460&SiteID=1
If this posting was complete, it looks like what I was looking for.
View 9 Replies
View Related
Feb 13, 2007
Hi,
Let's say I have a package taking as parameter "InvoiceID". I want to execute this package as a child in another package. The parent package gets the list of invoices to produce and calls the child package for each entry of the list.
How do I pass the InvoiceID to the child? I know I can use the parent's variables from the child but I don't want the child package to be dependant on the parent package. For example, I might want to execute the "child" package as a stand-alone in development (providing it with a predefined InvoiceID). I might also want to call the same child package from another parent package with other variable names.
What I would like to do is "push" the value instead of "pulling" it. I know it's possible using the command line and the /SET option (ex.: /SET Package.Variables[InvoiceID].Value;' 184084)... Is it possible using the Execute Package Task?
Thanks
View 4 Replies
View Related
May 16, 2006
I just spent the past 3 or 4 hours trying to figure out how i could represent carriage returns and line feeds properly in package configuration variables that an SSIS package can properly handle, so i figured I'd post my results in case anyone else has struggled with this.
Initially, I thought I would be able to just represent the delimiter as the same value that you can pick from in the flat file connection manager dialog, i.e. {CR}{LF}, {CR}, {LF}, etc. nope.
Then I decided to try actually storing the characters as hex, i.e. _x000D__x000A_ for {CR}{LF}. nope.
After scanning the .dtsx packages for a while, I finally found something that works: you have to represent the curly brackets in hex, and you can simply use the CR or LF string literals. so if you wanted to have a row delimiter that was {CR}{LF}, you would need to set your variable to: _x007B_CR_x007D__x007B_LF_x007D_
Hope this saves some people the pain I had to endure.
View 1 Replies
View Related
Mar 1, 2007
We are trying to start a server job running an SSIS package and supply some parameters to the package when we start the job using SMO.
What we have now is this:
string cmdLine = job.JobSteps[0].Command;
cmdLine += @" /SET PackageGetGroupRatingYear_Id.Variables[User::RatingId].Value;1";
cmdLine += @" /SET PackageGetGroupRatingYear_Id.Variables[User::GroupId].Value;1";
cmdLine += " /SET \Package.Variables[User::period].Value;"" + periodEndDate + """;
job.JobSteps[0].Command = cmdLine;
job.Start();
It appears that when the job is run, the modified command line is not used.
What is needed to supply runtime parameters to a job step when starting the job via SMO?
Thanks,
View 3 Replies
View Related
May 26, 2015
I have an SSIS package created on SQL Server 2005. I have moved this to a SQL Server 2008 R2 server and amended the package on this new server to point at the correct databases.
The package runs manually. However, I cannot see the package when trying to schedule a job. The dropdown list does not contain the package.
I imported the package by right clicking on MSDB and selecting the package from the file system. The package then appears under this folder (SQL Server Integration Services). I then create the SQL job but cannot see the package I just created.
View 2 Replies
View Related
