Problem With Connecting With Online Mssql 2000 Database
Sep 30, 2007dear all
i tried to connect to online mssql2000 database from enterprise manager,but i can't as i have a proxy server.
how can i overcome this proxy server during connection ?
ADVERTISEMENT
How Do I Make An MSSQL 2000 Server Database Go Offline/Online Using VB 6
Jun 21, 2001Does anyone know how to do this? I am in the middle of writing a server side program, and this is one thing that I cannot do without.
Also, if anyone can answer that, how do I do the same with an Exchange 5.5 Email account?
Thanks ahead of time!
Cash Coleman
Connecting To Online Database Using Local Enterprise Manager
Jul 23, 2005I have Enterprise Manager on my local machine. For the last twelvemonths it has been connecting without problem to my online SQL Serverdatabase provided by my ISP.Three weeks ago the ISP applied some sort of extra securityarrangements to their SQL Server to allow access only through port1433. they have told me to configure an alias using Network Client andto register this alias in the usual way using my Enterprise Manager.My problem is that despite creating the alias in exactly the wayinstructed I just cannot connect to online database. I keep gettingthe SQL Server does not exist or access denied when I try to connect.As a result of advice obtained I have tried using the lite version ofthe 'littleADmin' tool available fromhttp://www.mylittletools.net/scripts/en/mla_sql/Using this useful looking software I find I cannot connect to theonline SQL database when it is installed on my own local machine butif I install it on my website it does connect without problem to myonline SQL. Server databaseHowever I need to use my more powerful Enterprise Manager to connect,my question (at last!) is:1. Is there likely to be a problem trying to connect to my onlinedatabase from Enterprise Manager on my local machine as a result ofthe new security arrangements. In other words, is there somethinganalagous to what is happening with the 'littleAdmin tool' wherebyusing Enterprise Manager I cannot connect from my local machine forsome reason obvious to everyone except myself??or2. Is it possible that there is some problem arising from Net Client?(the aliases appear in Enterprise Manager OK)I know my ISP should be answering this sort of question but they justdon't seem to know. I need to connect even if only to download mydatabase and take it to another ISP,Best wishes, John Morgan
View 4 Replies View RelatedConnecting To MSSQL Server 2000 Using JDBC
Jun 18, 2007Hello,
I am developing an application which needs JDBC connection to a Named Instance of SQL Server 2000 (other than default instance). I am facing problem in this regard as my code gives an exception "Time Out" or "Connection Failed". However it works fine with the default named instance...The main driver class is "com.microsoft.sqlserver.jdbc.SQLServerDriver"
and Connection URL is
"jdbc: sqlserver://localhost;instanceName=Testing:1432;databaseName=testDB;"
It gives the exception that Unable to connect to named instance....
Please if any one have any knowledge in this regard....do let me know....I have read an article on MSDN according to which on MS SQL Server 2000 the named Instance other than default can be accessed only through named pipes.
http://msdn2.microsoft.com/en-us/library/aa224779(sql.80).aspx
if some body can tell me Connection string for JDBC driver which utilizes named pipes...the it will be very help full for me.........any help from MSDN Experts is really appreciated...
Thanks
Conversion Of MSSql 2000 Database To MSSQL 2005 Database
Jan 18, 2008How to convert a database in MSSQL 2000 to MSSQL 2005 database.Is there any tool or documentation available for this?
View 3 Replies View RelatedRestoring Database MSSQL 2000
Jul 16, 2004Hi All
We restored a database but the user asscociated with that database is not being restored. Is there a way to do this?
Question: Is there a way to restore the complete database including the users.
Thanks
James
MSSQL 2000: Copying Database
Oct 4, 2006Hi,
I am using MSSQL 2005 but we have to work in compatibility mode with MSSQL 2000 and also we are only allowed to use 2000-compatible features, now my question:
I need to programmatically copy a database within the same server (including all stored procs, triggers and tables, indices) ...
Can anybody give me a hint what is the best way for reaching this target??
Thanks a lot in advance
Greetings
Stefan
Connecting To The Database In SQL Server 2000
Jan 31, 2007I am developing a system using VS 2003 with database SQL Server 2000.
In web.config, I have added the following code in it
<sessionState
mode="InProc"
stateConnectionString="tcpip=127.0.0.1:42424"
sqlConnectionString="data source=127.0.0.1;Database=grandb;Trusted_Connection=yes"
cookieless="false"
timeout="60"
/>
Actually I don't know if the above code is correct. My database is stored in the SQL Server 2000 and named as grandb.
Thank you.
Inserting CheckBox Values Into A Database (MSSQL 2000)
Sep 12, 2005I have been trying to add values to a database and it keeps failing
i have no idea what i am doing wrong please help the code is asp.net
using vb. I have been having serious trouble passing check boxes in
forms from day one both singularly and dynamically from datagrids
if someone could show me some sample code of how to pass these
sort of values into the component and on to the query in this way
i would very much appreciate it.
Fuzzygoth
the error returned is
Description: An
unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the
error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException:
INSERT statement conflicted with COLUMN FOREIGN KEY constraint
'tblStation_FK00'. The conflict occurred in database 'TealSQL', table
'tblTravelPoint', column 'travelpointID'.
The statement has been terminated.
I have marked the area of the code the error is returned in the colour Violet and with a ##
The code i am using is below
## The aspx page ##
<%@ Page Language="vb" Debug="true" Trace="True"
Inherits="Devotion2Motion.AdminComp"
Src="../CodeBehind/AdminModule.vb" %>
<!-- Binds the ActivityResortInfo.ascx user control to the page -->
<%@ Register TagPrefix="UserContol" TagName="D2MHeader" Src="../UserControls/Header.ascx" %>
<%@ Register TagPrefix="UserContol" TagName="D2MFooter" Src="../UserControls/Footer.ascx" %>
<%@ Register TagPrefix="UserContol" TagName="TravelPointDD" Src="../UserControls/TravelPointDD.ascx" %>
<script language="vb" runat="server">
Sub Page_Load()
If IsPostback = True Then
Dim aInternational As Integer
Dim Station As String = Request.Form("StationFrm")
Dim Type As String = Request.Form("TypeFrm")
Dim Address1 As String = Request.Form("address1Frm")
Dim Address2 As String = Request.Form("address2Frm")
Dim City As String = Request.Form("cityFrm")
Dim International As String = Request.Form("InternationalFrm")
Dim TravelPoint As Integer = Request.Form("_ctl5:dsTravelPointDD")
If IsNothing(International) Then
aInternational = "0"
Else
aInternational = "1"
End If
Dim AdminTravelPoints As New Devotion2Motion.AdminComp()
' Select the country dropdown list
AdminTravelPoints.AddStation(Station, Type, Address1, Address2, City,
aInternational, TravelPoint)
End If
Dim ReadResultTable As New Devotion2Motion.AdminComp()
' Select the country dropdown list
dsResultSet.DataSource = ReadResultTable.GetStationtbl()
dsResultSet.DataBind()
End Sub
</script>
<!-- This UserControl Pulls in the header UserControl and the Div Tag Positions it #css reffrence is TopControl -->
<Div Class="TopControl">
<UserContol:D2MHeader runat="server"/>
</Div>
<form method="post" action="AdminTravelPoint.aspx" runat="server">
<Div Class="CentreControl">
<table border="0">
<tr>
<td>
<asp:Label Text="Station Name: " CssClass="BodyStyle" runat="server"/>
</td>
<td>
<asp:TextBox ID="StationFrm" CssClass="PrimaryGrid" runat="server"/>
</td>
<tr>
<tr>
<td>
<asp:Label Text="Type: " CssClass="BodyStyle" runat="server"/>
</td>
<td>
<asp:TextBox ID="TypeFrm" CssClass="PrimaryGrid" runat="server"/>
</td>
<tr>
<tr>
<td>
<asp:Label Text="Address1: " CssClass="BodyStyle" runat="server"/>
</td>
<td>
<asp:TextBox ID="Address1Frm" CssClass="PrimaryGrid" runat="server"/>
</td>
<tr>
<tr>
<td>
<asp:Label Text="Address2: " CssClass="BodyStyle" runat="server"/>
</td>
<td>
<asp:TextBox ID="Address2Frm" CssClass="PrimaryGrid" runat="server"/>
</td>
<tr>
<tr>
<td>
<asp:Label Text="City: " CssClass="BodyStyle" runat="server"/>
</td>
<td>
<asp:TextBox ID="CityFrm" CssClass="PrimaryGrid" runat="server"/>
</td>
<tr>
<tr>
<td>
<asp:Label Text="International: " CssClass="BodyStyle" runat="server"/>
</td>
<td>
<asp:CheckBox ID="InternationalFrm" CssClass="PrimaryGrid" runat="server"/>
</td>
<tr>
</tr>
<td>
<asp:Label Text="Travel Point: " CssClass="BodyStyle" runat="server"/>
</td>
<td>
<UserContol:TravelPointDD runat="server"/>
</td>
<tr>
</tr>
<td>
</td>
<td>
<input value="Submit" type="submit">
</td>
</tr>
</table>
</Div>
<asp:DataGrid ID="dsResultSet" AutoGenerateColumns="False" CssClass="PrimaryGrid" ShowHeader="true" runat="server">
<Columns>
<asp:BoundColumn DataField="StationID" ReadOnly="true" HeaderText="Station ID"/>
<asp:BoundColumn DataField="Station" ReadOnly="true" HeaderText="Station"/>
<asp:BoundColumn DataField="Type" ReadOnly="true" HeaderText="Type"/>
<asp:BoundColumn DataField="Address1" ReadOnly="true" HeaderText="Address"/>
<asp:BoundColumn DataField="Address2" ReadOnly="true" HeaderText=" "/>
<asp:BoundColumn DataField="City" ReadOnly="true" HeaderText="City"/>
<asp:BoundColumn DataField="International" ReadOnly="true" HeaderText="International"/>
<asp:BoundColumn DataField="TravelPoint" ReadOnly="true" HeaderText="City"/>
</Columns>
</asp:DataGrid>
</form>
<Div Class="CenterControl">
<UserContol:D2MFooter runat="server"/>
</Div>
##the vb componet that passess to the sql query ##
Public Function AddStation(ByVal Station As String, ByVal Type As
String, ByVal Address1 As String, ByVal Address2 As String, ByVal City
As String, ByVal aInternational As Integer, ByVal TravelPoint As
Integer) As SqlDataReader
' Create Instance of Connection and Command Object
Dim
myConnection As New
SqlConnection(ConfigurationSettings.AppSettings("strConn"))
Dim
myCommand As New SqlCommand("sp_call_Station_Insert", myConnection)
' Mark the Command as a SPROC
myCommand.CommandType = CommandType.StoredProcedure
' Add Parameters to SPROC
Dim
parameterStation As New SqlParameter("@Station", SqlDbType.NVarChar, 50)
parameterStation.Value = Station
myCommand.Parameters.Add(parameterStation)
' Add Parameters to SPROC
Dim
parameterType As New SqlParameter("@Type", SqlDbType.NVarChar, 50)
parameterType.Value = Type
myCommand.Parameters.Add(parameterType)
' Add Parameters to SPROC
Dim
parameterAddress1 As New SqlParameter("@Address1", SqlDbType.NVarChar,
50)
parameterAddress1.Value = Address1
myCommand.Parameters.Add(parameterAddress1)
' Add Parameters to SPROC
Dim
parameterAddress2 As New SqlParameter("@Address2", SqlDbType.NVarChar,
50)
parameterAddress2.Value = Address2
myCommand.Parameters.Add(parameterAddress2)
' Add Parameters to SPROC
Dim
parameterCity As New SqlParameter("@City", SqlDbType.NVarChar, 50)
parameterCity.Value = City
myCommand.Parameters.Add(parameterCity)
' Add Parameters to SPROC
Dim
parameteraInternational As New SqlParameter("@aInternational",
SqlDbType.Int, 4)
parameteraInternational.Value = aInternational
myCommand.Parameters.Add(parameteraInternational)
' Add Parameters to SPROC
Dim
parameterTravelPoint As New SqlParameter("@TravelPoint", SqlDbType.Int,
4)
parameterTravelPoint.Value = TravelPoint
myCommand.Parameters.Add(parameterTravelPoint)
' Execute the command
myConnection.Open()
## Dim result As SqlDataReader = myCommand.ExecuteReader(CommandBehavior.CloseConnection)
' Return the datareader
Return result
End Function
## The sql stored procedure ##
CREATE PROCEDURE [dbo].[sp_call_Station_Insert]
(
@Station As nVarChar(50),
@Type As nVarChar(50),
@address1 As nVarChar(50),
@address2 As nVarChar(50),
@City As nVarChar(50),
@aInternational As nVarChar(50),
@TravelPoint As Int
)
AS
DECLARE @ConVale As nVarChar(50)
SET @ConVale = (SELECT Station FROM tblStation WHERE @Station = Station)
If @ConVale = @Station
BEGIN
SELECT * FROM tblStation
END
ELSE
BEGIN
insert into tblStation
(Station, Type, address1, address2, city, International, TravelPoint)
values (@Station, @Type, @address1, @address2, @City, @aInternational, @TravelPoint)
SELECT * FROM tblStation
END
GO
Creating A Database In MSSql 2000, But NOT In The Default Directory
Sep 28, 2002I am trying to find a solution to a thorny problem I have encountered...
I am a newbie in Sql Server 2000, but have quite a bit of experience in databases, both on PC and mainframe.
I am currently writing a program, which needs, among other things, to create Sql Server databases, to be located NOT in the default Mssql2000 directory, but in the user's home directory.
I am using an ADO connection and trying to execute it, as follows:
The text of the relevant part of the program goes like this:
Dim strCreateDatabase As String
Dim MyCn As ADODB.Connection
Set MyCn = New ADODB.Connection
With MyCn
.ConnectionTimeout = 25
.Provider = "sqloledb"
.Properties("Data Source").Value = "MOP"
.Properties("Initial Catalog").Value = ""
.Properties("Integrated Security").Value = "SSPI"
.Open
End With
strCreateDatabase = "Create Database Rimon on (" _
& "Name = Rimon, Filename = '\mopusersMR_DiazsalpmsdataRimon_Data.mdf', " _
& "Size = 20, MaxSize = 100, FileGrowth = 5) " _
& "Log on (Name = 'Rimon', Filename = 'c:usersMR_DiazsalpmsdataRimon_Log.ldf', " _
& "Size = 2, MaxSize = 10, FileGrowth = 1)"
MyCn.Execute strCreateDatabase
Both the name of the Sql Server and the Win2K server is MOP.
All the directories exist, and I have full access to them.
When I try to run this command, I get the following message:
File
'\mopusersMR_DiazsalpmsdataRimon_Data.mdf' is on a network device not supported for database files.
When I omit this location, it works just fine.
If I run it on the server, using another directory, it works just fine.
Do you have any idea what I am doing wrong?
Thanks in advance for any help!
Rimon Rafiah
Enable And Disable User In MsSql 2000 Database
May 25, 2007Hi,
I'm using MsSql 2000 data base, how to enable and disable user in mssql 2000 version
Running MSSQL 2000 Database In A 2005 Server
Jun 26, 2006I'm running 2000 databases in a 2005 server. Can anyone tell me if there are adverse effects in doing this?
As I understand it, the 2005 performance benefits are available to databases running as 2000(Ver80) But some of the new futures may not be available..
And any documentation from Microsoft/white papapers regarding this subjects are appreciated..
Inserting And Retriving Datetime Field In Database MSSQL 2000
Jan 10, 2006Hi, Assume I have a table name "myTime". This table is simply only have 1 (one) DATETIME field "MyTestTime" (also serve as a primary number).Table MyTime- MyTestTime : SQLTYPE DATETIMETo insert a new row into this field, I simply wrote :SqlCommand sqlCommand = new SqlCommand("insert into MyTime values('2006-01-09')", sqlConnection);
I got the value of "2006-01-09" from a textbox or other relevan control.I realize when I try to use "SELECT * FROM MyTime" statement, MSSQL server 2000 automatically convert my date value from "2006-01-09" to "01/09/2006" (from YYYY-MM-DD to MM/DD/YYYY). I don't know why this one must be converted to MM/DD/YYYY automatically (I believe this behavior is depend on some "setting option" in my MSSQL server - but I don't know which one).The challenge is :In my country, the actual date format is like German Date format (DD-MM-YYY). Well I know this is only "Customization" problem. But how insert datetime value given from sql query to a datetime variable?// Connect to database, make a query, get the datareader result, and bla bla blaDateTime aDateTime = new DateTime;aDateTime = Convert.ToDateTime(myDataReader["PostDate"].ToString());// close connectionMy question isHow can I make sure that aDateTime's day is 09 not 01. How my program know that 09 is day not month. I can't use string.split() method because it's possible that my database setting will change from "mm-dd-yyyy" to "dd-mm-yyyy"thanks
Why Is My Database Re-indexing Script Not Able To Shrink Databases? (MSSQL 2000)
Aug 3, 2007Hi,
Currently we have a variety of SQL 2000 (and 2005) database servers, we are having issues with the maintenance plan of a few SQL2000 boxes where they no longer have enough hard disk space to do a full index-rebuild on the system.
Now we want to re-build the databases indexes approximately once a week, or maybe a little less often, in the past this has worked fine with maintenance plans.
However, we now have issues because we have some databases in offline mode, and we are quite low on disk space with no plans for hardware upgrades anytime soon.
The temporary solution is to turn the index rebuilds off.
I have been working on a script that will:
Cycle through each database and within that database:
Go through each table
Run a DBCC DBREINDEX on the table
Move on to the next table
Once the reindexing of one database is complete
IF the database is not in simple mode
Backup the transaction log
Run a DBCC SHRINKDATABASE with the required amount of free space
Go to the next database until all are complete.The logic is quite simple but so far this has not worked, it would appear something is locking the transaction log until the script exits.
Now the script works fine excluding the shrinkdatabase, I always get:
DBCC execution completed. If DBCC printed error messages, contact your system administrator. [SQLSTATE 01000]
Shrinking database: inf_dev target percentage: 10 at: Aug 2 2007 5:33PM [SQLSTATE 01000]
Cannot shrink log file 2 (INF_PROD_Log) because all logical log files are in use. [SQLSTATE 01000]
Where I'm indexing the INF_Prod database.
A DBCC LOGINFO shows something along the lines of:
Code Snippet
BACKUP LOG successfully processed 45162 pages in 152.607 seconds (2.424 MB/sec). [SQLSTATE 01000]
FileId FileSize StartOffset FSeqNo Status Parity CreateLSN
----------- ---------------------- ---------------------- ----------- ----------- ------ ---------------------------
2 253952 8192 29618 0 128 0
2 253952 262144 29621 0 64 0
2 253952 516096 29620 0 64 0
2 278528 770048 29619 0 64 0
<cut cut>
2 9043968 370737152 0 0 0 29800000001528500007
2 9043968 379781120 29802 2 64 29800000001528500007
2 9043968 388825088 29801 0 64 29800000001528500007
Clearly there is something in the log file towards the end.
However, I don't know why this is happening as I'm running the script in the master database and I've backed up the transaction log of the database I'm working on.
I've tried doing Full backup + Transaction log + Shrink, it fails.
I've tried waiting 10minutes in the script + shrink, it also fails.
However, if I open a query analyzer and do a backup log, then a shrink it works perfectly every time.
However in the script it always fails no matter what I do.
Where am I going wrong here?
Regards,
Gareth
Error Connecting Database Problem After Moving Databases 2000 To 2005
Nov 9, 2007I have moved my databases to 2000 to instance of 2005 on the same server.
Now i set databases offline in 2000 as i did upgrade use backup & recovery method.
& my connection string
Password=test;Persist Security Info=True;User ID=test;Initial Catalog=databasename;Data Source=ipaddress
i was using above connection string to connect when using 2000 databases form applications in the production machine
I get the following error when i am running my applications now after moving to 2005
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
IS it because i have two server on one server or
What do i need to do in order to fix this....tried several thing by searching nothing worked out..
Let me know
thanks
Server Configuration For MSSQL 2000 And MSSQL 2005
Sep 6, 2006Does enabling/disabling Data Execution Prevention have a performanceimpact on SQL 2000 or SQL 2005?For SQL best performance - how should I configure for:Processor Scheduling:Programs or Background servicesMemory Usage:Programs or System Cache
View 9 Replies View RelatedCreating Index In MSSQL 2000 From MSSQL 2005
Mar 24, 2008Hi,
I am a bit new to the MSSQL server. In our application, we use so many SQL queries. To imporve the performance, we used the Database enigine Tuning tool to create the indexes. The older version of the application supports MSSQL 2000 also. To re-create these new indexes, I have an issue in running these "CREATE INDEX" commands as the statements generated for index creation are done in MSSQL 2005. The statements include "INCLUDES" keyword which is supported in MSSQL 2005 but not in MSSQL 2000.
Ex:-
CREATE INDEX IND_001_PPM_PA ON PPM_PROCESS_ACTIVITY
(ACTIVITY_NAME ASC, PROCESS_NAME ASC, START_TIME ASC, ISMONITORED ASC)
INCLUDE
(INSTANCE_ID, ACTIVITY_TYPE, STATUS, END_TIME, ORGANIZATION);
Any help in creating such indexes in 2000 version is welcome.
Thanks,
Suresh.
Generating Script For MSSQL 2000 From MSSQl 2005?
May 3, 2008Hello
We are using SQL 2005 and now we are planning to use SQL 2000. what are the ways to do the process.
We taken the script spcificall for 2000 and run it in SQL 200. But we are getting the error in SCRIPT?
Could you please give me the step to do?
Thanks,
Sankar R
MSSQL Express 2005 Vs. MSSQL 2000
Jun 15, 2006Ben writes "I have a sql script that doesn't function very well when it's executed on a SQL 2000 server.
The scrpt looks like this:
---------------------------------------------------------------------------------------------------
USE [master]
GO
IF NOT EXISTS (SELECT * FROM master.dbo.syslogins WHERE loginname = N'SSDBUSERNAME')
EXEC sp_addlogin N'SSDBUSERNAME', N'SSDBPASSWORD'
GO
GRANT ADMINISTER BULK OPERATIONS TO [SSDBUSERNAME]
GO
GRANT AUTHENTICATE SERVER TO [SSDBUSERNAME]
GO
GRANT CONNECT SQL TO [SSDBUSERNAME]
GO
GRANT CONTROL SERVER TO [SSDBUSERNAME]
GO
GRANT CREATE ANY DATABASE TO [SSDBUSERNAME]
GO
USE [master]
GO
If EXISTS (Select * FROM master.dbo.syslogins WHERE loginname = N'SSDBUSERNAME')
ALTER LOGIN [SSDBUSERNAME] WITH PASSWORD=N'SSDBPASSWORD'
GO
GRANT ADMINISTER BULK OPERATIONS TO [SSDBUSERNAME]
GO
GRANT AUTHENTICATE SERVER TO [SSDBUSERNAME]
GO
GRANT CONNECT SQL TO [SSDBUSERNAME]
GO
GRANT CONTROL SERVER TO [SSDBUSERNAME]
GO
GRANT CREATE ANY DATABASE TO [SSDBUSERNAME]
GO
USE [master]
GO
IF EXISTS (select * from dbo.sysdatabases where name = 'ISIZ')
DROP DATABASE [ISIZ]
GO
USE [SurveyData]
GO
exec sp_adduser 'SSDBUSERNAME'
GRANT INSERT, UPDATE, SELECT, DELETE
TO SSDBUSERNAME
GO
USE [SurveyManagement]
GO
exec sp_adduser 'SSDBUSERNAME'
GRANT INSERT, UPDATE, SELECT, DELETE
TO SSDBUSERNAME
---------------------------------------------------------------
I need to be converted to a script that can be executed on both MSSQL 2000 and MSSQL 2005.
I was wondering if somebody there could help me with this problem?!
Thanks,
Ben"
Migration MSSQL 2000 32-bit To MSSQL 2005 64-bit
Nov 17, 2007I've been tasked to move our production databases on MSSQL 2000 to 2005. I've supported MSSQL since version 6.5 and performed migrations to successor versions.
Current Environment is MSSQL 2000 32-bit with current Service Packs.
I've performed mock migrations on Test servers upgrading all Production instances simultaneously from MSSQL 2000 to 2005 32-bit. The Test environment is identical to Production minus server name, IP etc. Also I have a separate server with MSSQL 2005 installed where I use the DETACH / ATTACH and BACKUP / RESTORE method for migration / acceptance testing. There are approximately 30 databases totaling 70 GB. This has gone as expected and fairly successful. Vendors have been coordinated with to update code and staff for acceptance testing.
I'd prefer going directly to MSSQL 2005 64-bit instead if possible due to memory benefits etc. This is where I'd like some feedback prior to borrowing a 64-bit server for testing.
Upgrade options:
1. Is it better to migrate from MSSQL 2000 32-bit to 2005 64-bit via:
a. DETACH / ATTACH
b. BACKUP / RESTORE
c. Is one method more advantageous relating to the end result?
2. Regarding XP clients, have issues been experienced with the default SQL Server driver or is an alternate recommended for XP clients to connect to a MSSQL 64-bit server databases?
3. If you have performed this migration and have relevant experience please pass them along.
Replication :: Syncing Of Database From Local Host Database To Online Database Automatically After Some Interval
Oct 14, 2015I have database on localhost and i want to show this data on my website. I want to create a database online and want to sync with Local Host. Can it be possible syncing data automatically after some interval?
View 6 Replies View RelatedConnecting To MSSQL In VBA?
Jan 9, 2007This is kind of the wrong place to ask VBA questions, but I've been poking around for a day and haven't got the answer, so I am hoping I can get some help here.
I am wondering if I can connect to MSSQL in MS Word Macro. If so, can I have some sample code please?
Thanks
Connecting To MSSQL-- All About It??
May 15, 2008I'm just starting to learn ASP.NET (3.5) and I've gotten most of it down, but my failure to use a database is realy crippling my learning ability.
How do I connect to MSSQL? I have Godaddy so they provide me with the username, password, url, etc. If I could get a few examples for the following it would really help ALOT!
Connect to database
Connecting To MSSQl In ASP.NET
May 23, 2007This is the first asp.net application that I am trying to make.
After hours struggling wiht Plesk 8.1 I managed to create a MS SQL database and add a table to it.
How can I make a connection to this database now through ASP.NET?
Just mention it that I am using Visual Studio.net and I am working on a remote server.
Connecting DB On A Pendrive In MSSQL 7.0
Sep 12, 2004I am developing an application in VB. I want to know whether we can keep the database file (.mdf) on the pendrive in MS SQL 7.0. If this can be done HOW CAN THIS BE DONE Please guide me. It should be that when i connect my pendrive to the machine / server then i should be able to acess the database. This is a chellenging job which i have taken. Please guide me if this is possible.
Hoping for you HELP
THank YOu
Vikram Jain
Connecting To A Web Based MSSQL DB
Jun 15, 2006Hi all,
I'm running a MSSQL DB on our web server and currently I need to use Teratrax Database Manager to connect and manage it. Unfortunately this doesn't seem to have any features to export the data from the database.
I read somewhere about an online MSSQL tool which can manage online databases? Does this exist?
What tool would I use to connect to my database to export data from it? I have an evaluation copy of MS SQL Server 2005 but my knowledge with it is limited and I'm having trouble getting it connected to a remote DB (local DBs are fine).
Any help would be appreciated!
Thanks!
Free Online Book For Sql Server 2000
Mar 7, 2006i am new to sql. plz let me know from where can i get free book to study sql server 2000.
View 3 Replies View RelatedRecovery :: Server Cluster Resource Fails To Come Online And Pending Online State
Nov 3, 2015We have SQL cluster installed on top of windows cluster on VM environment. Node1 and Node2 under Windows Failover Cluster. SQL instance is currently on node2 the instance is up and running, but SQL Cluster service remains online pending and it restarts the instance on every 5 minutes.
SQL Browser service are running successfully.TCP/IP ports are enabled and configured.If we start the SQL server agent it is on for seconds and stopped immediately .Cluster Service is attempt to connect to the SQL service every few minutes (setting in SQL cluster resource) for the IsAlive check, if this fails then the SQL resource is restarted even if the instance was online. Hope this is what happening exactly.
[sqsrvres] ODBC Error: [08001] [Microsoft][SQL Server Native Client 11.0]SQL Server Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF]. (268435455)
00001024.00053314::2015/10/30-19:57:50.772 ERR [RES] SQL Server <SQL Server (SIMAH_COMMDB)>: [sqsrvres] ODBC Error: [HYT00] [Microsoft][SQL Server Native Client 11.0]Login timeout expired (0)
00001024.00053314::2015/10/30-19:57:50.772 ERR [RES] SQL Server <SQL Server (SIMAH_COMMDB)>: [sqsrvres] ODBC Error: [08001] [Microsoft][SQL Server
Native Client 11.0]A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books
Online. (268435455)
00001024.00053314::2015/10/30-19:57:50.772 INFO [RES] SQL Server <SQL Server (SIMAH_COMMDB)>: [sqsrvres] Could not connect to SQL Server (rc -1
First Time Connecting To MSSQL But Error
Apr 15, 2006Hi.
i am in my early days on intergrating MY Sql with PHP.
My windows 2000 server has bought PHP and MYsql installed.
When i attempt to connect to the mysql server using the forllowing PHP code
the below error message appears.
"Fatal error: Call to undefined function mysql_connect() in E:Web_Serverphpcon_mysql.php on line 2"
my php code is as follows.
[php]
<?php
$link = mysql_connect('MYSERVER', 'admin', '123456');
if (!$link) {
die('Could not connect: ' . mysql_error());
}
echo 'Connected successfully';
mysql_close($link);
?>
[/php]
What could be the problem?
Good Online Resources For Teaching SQL For SQL Server 2000
Oct 27, 2005my freind asked me to look for him for online book or something very good that teach SQL for SQL server 2000 ... what i need is something like hands on examples that will take user from level 1 to level * .... i have seen alot of stuff in google but i think some of you might know what i need and can direct me to better resources as i could not find someting specail !!!
View 2 Replies View RelatedSql 2000 Reporting Services - Reports Will Not Render Online
Jul 5, 2007Hi all,
i got through the installation of the Sql Server 2000 Reporting services evaluation and managed to deploy a couple reports and a shared data source to my reporting server on my DEV box.
Now im trying to view the reports i made online and they never render, all i get is the animated gif that always says "Report is being generated". This goes on and on with apparently no end in sight.
I CAN preview the reports in VS 2003 and they render almost instantly. there are no differences that may affect the connection to the database between my development computer (with VS 2003) and the server that the reporting server is on.
Anyone have any ideas as to why this may be happening ?
thanks,
mcm
Need Help Connecting Java To Mssql, I'm Even Lost At Install
Jan 17, 2007Hello,
Hope anyone in here can help.
I have tried to install the SQL Server 5 Express, but can't seem to get it to work properly.
I got a terrible name set as default for my database, as well as a terrible name for my username.
I can't find a place to change this to something more manageable.
It is further set to windows auth, but trying to set it to both, and trying a username (and password) always gives me a log in error.
I've tried searching all over the net and in here for a simple tutorial, but can't seem to find one that helps me more than it confuses me.
*****
The second part of the problem is that I have a java program which I want to connect to the database and use the tables in it, but I am at loss to how I can find what username (and password) I am supposed to have, what "url" it needs etc.
I have the jdbc driver so that part should work, I can successfully log to other mssql databases (at work/school), but not my own.
Hope you can help, and thanks in advance.
Remote Connecting To MSSQL Through A VSTO Addin
Jan 28, 2008
Hi there everybody
I am a novice in using MSSQL and Windows 2003 solutions so I am having some problems.
I have made an excel addon in VSTO that connects to a MSSQL2005 server running on Windows 2003 on our internal domain, and it works great. Connection when I specify the domain adress is flawless. The thought is though that the addin is supposed to been used also outside our domain, so I have opened up our router and redirects all traffic to and from port 1433 to our MSSQL-server. This part should be ok.
I can then not connect to this server with our external ip specified. The error message Visual Studio produces is "An error has occured while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 -A connection attempt failed because the connected party did not properly respond after a period of time, or established connecteion failed because connected host has failed to respond.)"
I have read around and tried to fix this myself. I've specified to accept "Locale and remote connections" in the Surface Area Configuration Tool that shipped with MSSQL on both TCP/IP and named pipes. In the SQL Server Configuration Manager is the protocols Shared Memory and TCP/IP enabled. I have enabled all the IP-adresses under TCP/IP and specified 1433 as the port to use for all of them.
As for possible other problems I can see:
I have read a couple of places that people have tried to connect with the MSSQL server through telnet when specifying the port 1433 (telnet mydomain.net 1433). I have tried this but telnet is not getting a connection. Dont I have to open/forward more ports on the router to get telnet through?
I cant ping our external ip. Isnt this also a problem that is related to that I have not opened/forwarded ports on the router to our MSSQL server?
Do anyone of you have any tips or steps to take to narrow the problem down? This is not the forum for VSTO but thats not really where the problem is either, I think. It is probably somewhere in the configuration of MSSQL or Windows 2003. The server machine is set up as domain controller and DNS server for our local net.
I will appreciate all input, I am stuck at the moment...
Stein Agnar Sannes
Programmer (c, php, perl, java)