I've just installed VS .NET 2005 and also installed sql Express that come along with it
when I tried to run a simple web page wih gridview that connect to the sql express with the table that I create and test it
status is "Tested connection suceeded" or test query is also successful but when I run I got the following message please help
Cannot open database "customers" requested by the login. The login failed.
Login failed for user 'myServerASPNET'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Cannot open database "customers" requested by the login. The login failed.
Login failed for user 'USFER54-8B481CEASPNET'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
We are using the Windows Task Scheduler as a substitute for the SQL Server Agent, which isn't available in the Express edition. The scheduled task just calls a batch file, which in turn, runs a stored procedure using osql with the -E option for a Trusted Connection.
SQL Server Express has been installed using the defaults, which means the service is running in the "NT AUTHORITYNETWORK SERVICE" account. The scheduled task we create is set to run using the "NT AUTHORITYSYSTEM" account.
Now we find that on Windows Vista (tested using Ultimate Edition) that the scheduled task fails to run the stored procedure until the machine is rebooted the first time after installing SQL Server Express. When I say "fail", I mean that the stored procedure isn't executed. The scheduled task however completes and reports no errors. On Windows XP, we do not run into this problem so I suspect it has something to do with the UAC in Vista?
We further found that after installing SQL Server Express and creating the scheduled task in the "NT AUTHORITYNETWORK SERVICE" account, the scheduled task (and stored procedure) runs fine WITHOUT requiring a reboot.
Can anyone explain why a reboot is needed to get SQL Server Express to run the scheduled task correctly under Windows Vista and the SYSTEM account?
I created a single step plan that does integrity checks. It fails with the error below. I created a new connection using our clusters virtual sql name.
Executed as user: ACCTCOMsqlagent. ...n 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 1:10:06 PM Error: 2008-02-15 13:10:49.02 Code: 0xC00291EC Source: {0CF32F3D-A8D1-492A-9C0F-AD4E0FC67D14} Execute SQL Task Description: Failed to acquire connection "Local server connection". Connection may not be configured correctly or you may not have the right permissions on this connection. End Error Warning: 2008-02-15 13:10:49.02 Code: 0x80019002 Source: OnPreExecute Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. End Warning Error: 2008-02-15 13:11:31.26 Code: 0xC0024104 Source: Check Database Integrity Ta... The package execution fa... The step failed.
The agent and db are running under domain accounts and the job is owned by sa.
Let me set the stage of my testbed configuration: On Windows XP SP2, my default connection to the Internet is via wireless express card modem using EV-DO via Verizon Wireless. Let's call this connection A. I also have a traditional wireless network connection (802.11g) that is always enabled. Let's call this connection B. Connection A is always connected during normal business hours. Connection B is not and is often searching for a wireless network to connect to when nothing is in range.
Yesterday, connection B was continuously trying to connect to a wireless network not under my control, meaning that the connection was never established and notification messages continually popped up to complain of this fact. Over time, I've learned to ignore these messages and go on doing my daily work without much thought of the possible implications.
Then, things started to get odd. I was running our application, WebWatchBot, to perform some simple tests of various websites and servers, when I started to get messages from the application that database connectivity was lost, which is a message that pops up to inform the user that the connection is forcibly dropped by SQL Server. After a few moments, the connection to the database was re-established and the message went away. Since I was actually working with SQL Server, I thought it was an anomoly, so I continued on. Then, it happened again. And again. Then, I noticed that the "database connectivity lost" message started to coincide with the wireless connection's (connection B) inability to connect with a wireless network.
Why would this be happening? The database and application are on the same exact computer. The connection to the database is via ODBC drivers over tcp/ip, but why would connection B affect this?
Some added information that may prove useful:
Client side:
What is the connection string in you app or DSN? (please specify) DRIVER=SQL Server;SERVER=HIGHNOTEWEBWATCHBOT;Database=WebWatchBot;UID=sa;PWD=*****
If client fails to connect, what is the client error messages? (please specify) [Microsoft][ODBC SQL Server Driver]Communication link failure
Is the client remote or local to the SQL server machine? [Remote | Local] Can you ping your server? [YES | NO ] In cmd.exe console, type €œping -a <server_name>€?.
Can you telnet to your SQL Server? [YES | NO, please specify the error message ] In cmd.exe console, type €œtelnet <server name> port, where port can be 135, 445 or sql_server_tcp_port. If your cmd.exe console turns into a complete black screen with a cursor flushing on top left corner, you are connected. Type ctrl+€™[€˜ to bring up telnet prompt and type €œquit€? <enter>.
What is your client database provider? [SNAC | MDAC | ADO.NET1.0 | ADO.NET2.0| other (please specify] Or/And, what is your client application? [SQL Management Studio | SQL Profiler | Visual Studio | Other (please specify): WebWatchBot - Website and Server Monitoring Software Is your client computer in the same domain as the Server computer? (Same domain | Different domains | WorkGroup) What protocol the client enabled? [Shared Memory | TCPIP | Named Pipes]. Do you have aliases configured that match the server name portion of your connection string? NO Do you select force encryption on server and/or client? NO [2] Server side:
What is the MS SQL version? [ SQL Server 2005 | SQL Sever 2005 ] What is the SKU of MS SQL? [Enterprise | Standard | Workgroup | Express (or MSDE) | other (please specify)]. Microsoft SQL Server Management Studio 9.00.3042.00 Microsoft Analysis Services Client Tools 2005.090.3042.00 Microsoft Data Access Components (MDAC) 2000.085.1117.00 (xpsp_sp2_rtm.040803-2158) Microsoft MSXML 2.6 3.0 4.0 5.0 6.0 Microsoft Internet Explorer 7.0.5730.11 Microsoft .NET Framework 2.0.50727.832 Operating System 5.1.2600
What is the SQL Server Protocol enabled? [Shared Memory | TCPIP | Named Pipes ]. Use SQL Server Configuration Manager to configure it and check ERRORLOG or event log to confirm. Does the server start successfully? [YES | NO] If not what is the error messages in the SQL server ERRORLOG? If SQL Server is a named instance, is the SQL browser enabled? [YES | NO] What is the account that the SQL Server is running under?[Local System | Network Service | Domain Account] Do you make firewall exception for your SQL server TCP port if you want connect remotely through TCP provider? [YES | NO | not applicable] Do you make firewall exception for SQL Browser UDP port 1434? In SQL2000, you still need to make firewall exception for UDP port 1434 in order to support named instance.[YES | NO | not applicable ] [2a] Tool Used to Connect
What tool or Application are you using to connect to SQL Server (eg: Visual Studio, SQL Server Management Studio, SQLCmd.exe, OSQL, etc) and especially the version of SQL Server (Express, Workgroup, Standard, Enterprise, Developer)
[3] Platform:
What is the OS version? [Windows XPSP2 | Windows 2003 | Windows 2000 | Windows 98 | others (please specify ) ]. Do you have third party antivirus, anti-spareware software installed? [Symantec | Norton | other (please specify)].
I'm getting "Access denied" error when I try to connect to SSIS from my desktop (Database Engine is fine). I'm a member of sysadmin within SQL, as well as an administrator on the server. I don't have any problem when I log on to the server directly via Remote Desktop and open SSIS.
I went into the surface area config tool, and I see that Database Engine and Analysis Services both expand and have a sub tabs to enable Services and Remote Connections, but Integration Services does not expand to a Remote Connections option, just Services. We're running MSDN Enterprise edition.
Does it matter if all the SQL services are using "Local System" for the logon ? I use an administrative logon on my SQL2000 boxes, and was fiddling with them on the 2005 box yesterday, but it seemed to cause more problems, so they are all Local System for now.
This is my first time to deploy an asp.net2 web site. Everything is working fine on my local computer but when i published the web site on a remote computer i get the error "Failed to generate a user instance of SQL Server due to failure in retrieving the user's local application data path. Please make sure the user has a local user profile on the computer. The connection will be closed" (only in pages that try to access the database) Help pleaseee
Hi. I'm (very) new to SQL Server. I have run into what seems to be a very common problem, judging by the number of Google hits, but it's not actually in the FAQs here, as far as I can see.
Situation I installed SQL Server Express with Advanced Services 2005 on my Windows XP Pro laptop, using (with one exception) the default install. The exception was to put the data files on a separate partition (D: ) where I have more free space.
SQL Server Management Studio Express connects happily, and I set up a single data import table.
Issue: bcp Fails to connect to default local instance I initially tried bcp in output mode, prior to working in earnest on importing my data. However the command line-
bcp MyDatabaseName.dbo.UserProfile out UserProfile.txt -T -c
Fails with the error-
Error = [Microsoft][SQL Native Client]Named Pipes Provider: Could not open a connection to SQL Server [2].
As I understand it, the local instance of SSE is the default, and should use a local (shared memory?) connection. This seems to work for Management Studion Express, but not bcp.
While investigating this problem, I tried enabling remote connections (all types) through the Surface Area Configuration wizard, and found that remote connections using either of:
bcp eSpacePh1.dbo.UserProfile out UserProfile.txt -T -c -S localhostsqlexpress bcp eSpacePh1.dbo.UserProfile out UserProfile.txt -T -c -S mycomputernamesqlexpress
both work ok.
Extra Info When starting Management Studio Express, it says something like "Configuring environment for the first time". However it says this every time it is started, not just the first run after installation, does this indicate some configuration data is not being successfully stored?
I have found threads that look similar to my issue-
However these do not relate directly to bcp, and to be honest my knowledge of SSE is slender enough at this stage that i'm unsure if there are really relevant.
Occasionally I'm seeing the following error when tranlog or full backup maintenance plan is executing.
Failed-1073573396) Failed to acquire connection "Local server connection". Connection may not be configured correctly or you may not have the right permissions on this connection.
What is strange is that it goes away without any action from myself. We have a tranlog backup that is scheduled every hour. I had this error happen once in the middle of the night. It looks like the job was running fine because almost all the backups are there. I've searched and not found a resolution to this error. I checked the event log and don't see any issues and even tried rebuilding the maintenance plans.
I have a form to submit some data to a database located in the App_Data folder. I have the following connection string: <connectionStrings> <add name="ConnectionString" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Siven.mdf;Integrated Security=True;User Instance=True" providerName="System.Data.SqlClient"/> </connectionStrings>
On the form I'm using a DetailsView control and using a SqlDataSource as the datasource, pointing to the above connection string. In realtime, when i submit the data, I receive the following error:
Server Error in '/' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) I'm using discountasp.net as the host, and I did not elect to use the SQL Server databases, I'm just going to use SQL 2005 express. I dont understand why it's not pointing to the db when it's there (and to make sure, I re-uploaded). Is there something I missed here?
I know this is strickly not a website question, but dunno where else to post...To remotely admin and monitor some functions of the website, I wish to use a local application to connect to the MSSQL DB which is held on the remote webhosting serverI have the following code: Dim StrSQLUN As String = "[UN]" Dim StrSQLPW As String = "[PW]" Dim StrServer As String = "[IP][INSTANCE]" Dim StrDB As String = "[DB]" Dim strTimeOut As String = "Connection Timeout=0;" Dim pStrSQLConn As String = "Server=" & StrServer & ";Database=" & StrDB & ";User Id=" & StrSQLUN & ";Password=" & StrSQLPW & ";" & strTimeOut
Dim sqlConn As New SqlClient.SqlConnection(pStrSQLConn) If sqlConn.State = ConnectionState.Closed Then sqlConn.Open() This has basically been take from the existing code on the website, but changing to the server details. I had just started dev'ing this app when the admins decided to move the SQL server over to a different server. It was working on the old one, but the new one doesn't. It just times out after whatever time you put in the timeout variable. 0=unlimited, and so just sits there.I am also using the MSSQL Server Management Studio locally to connect to the same database, and although slow, does connect after about a minute or so. I thought they would be using the same type of underlying connection to access the server and database? Is this correct? Can they put restrictions in place for this specific sort of data access?Does anyone have any suggestions on how to resolve this issue??Thanks for any helpAdam.
I'm using the SQLCE 3.0 OLEDB Provider via VC++. I cannot seem to find any C++ documentation on using the Local Connection String. We need it to set the Max DB Size.
My primary question is what is the Property-ID for Local Connection String?
I'm just starting out here. I created a simple formview connected to a local file copy of the database by adding the database into the project. It worked fine. However, I noticed that this copy of the database was not synch'ing with the database with the same name in SQL express. So I created a new connections string to access the SQL database directly out of SQL express. Its just a simple Select * from column. However, this gives an error. Why? Server Error in '/NETCatMgr' Application.
The data types ntext and nvarchar are incompatible in the equal to operator. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: The data types ntext and nvarchar are incompatible in the equal to operator.
This is the connection string <add name="CatalogMgrConnectionString" connectionString="Data Source=mymachinesqlexpress;Initial Catalog=CatalogSQL;Integrated Security=True" providerName="System.Data.SqlClient" />
Doesn't make sense. How can the formview work fine with the SQL integrated into the project but not working with a connection string to the SQL Express proper???
This may be a stupid newbie question, but being that I'm not a DBA I'm going to ask it anyway.
We discovered a problem with a clients server (Windows 2003 SBS) when we tried to install Veritas Backup Exec. Backup Exec requires an instance of either SQLMSDE or full SQL. This server has full SQL 2000 sp3a installed on it with a working account application. When backup exec trys to create it's instance it fails.
Investigating further...when I go into Enterprise Manager (logged in as Domain Admin) I get an error when I select the local server.
I.E. "A connection could not be established to (LOCAL). Reason: Data source name not found and no default driver specified. Please verify SQL Server is running and check your SQL Server registration properties. blah blah blah.
Okay the server is running. The accounting application (client/server) is still working. I right click on the server and select "New Server Registration" for the field "server" I click the browse button and the "Active Servers" box is empty..:shocked:
I went to check the "Data Sources" under drivers, that field is blank. (no drivers installed). I downloaded MS's component checker and it says "MDAC 2.8 on Windows server 2003 sp1" is installed.
At this point I have exhausted my knowledge of MS-SQL server. My goal is to get BackupExec installed and NOT break the existing accounting application.
Here is the connect tring from table properties:ODBC;DRIVER=SQL Server;SERVER=VICRAUCHSRVRVGSMISC;APP=Microsoft Data Access Components;WSID=VICRAUCH;DATABASE=vgs_prod;TABLE=d bo.USysCandidatesHere is the connect string from the ADO .Open connect string:"ODBC;DRIVER=SQL Server;SERVER=VICRAUCHSRVRVGSMISC;APP=Microsoft Data Access Components;UID=sa;PWD=xxxXX99X;WSID=VICRAUCH;DATAB ASE=vgs_prod"Here is the ADO .Open code. Set CNN = New ADODB.ConnectionDim strDEFConn As StringstrDEFConn = FixConnStr(DEFCONN)CNN.Open strDEFConn The last line fails with the CNN.Open strDEFConn with this message:Run-time error '-2147467259 (80004005)';[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified This code works when the SQL Server is on it's own server, but for testing at my own office, I have SQL Server on the same machine as the Access application. I'm getting the above error where SQL Server and the Access app are on the same machine. I can open a linked SQL table from the user interface, and VBA code that deals with the tables as Access tables works. It is the ADO .Open statement where the error happens. Thanks for any help you can give me on getting this to work.
I want to add a data source to a C# project that comes from a local SQLServer instance. But when I attempt to do a new connection, it only allows me to specify a file. That is, the only choices I have to select a data source type are "Access DB file" and "SQL Server DB file". I know that with the non-express VS edition there are more choices available. But reviewing limitations of express editions on the web, I find a frequent mention that one cannot access remote data, only a locally installed data source. But is not a SQL Server instance on my local machine a local data source?
This is an issue because if I proceed with connecting as a file, then VC#Express complains the file is in use. If I first go into SqlServer Expresss and detach the database there, then I can connect to it in VC#Express, but that is rather cumbersome!
So to put it another way, can I use this connection string...
Data Source=.SQLEXPRESS;Initial Catalog=testDB;Integrated Security=True
instead of this one?
Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory| estDB.mdf;Integrated Security=True;Connect Timeout=30;User Instance=True
I am running windows 2003 server with SQL Server 2000 SP4, both running on the same machine in our development environment. We are using anonymous authentication and the website is running in an application pool which uses a user account with access to the SQL server databases.
In our live environment, IIS and SQL are on different physical servers and we use a connection string containing a fully qualified domain name for the server name to connect in standard ASP pages (not .NET):
This works fine, but in development where both are on the same machine, I want to still use the same connection string, and point sqlserver.internal.companyname.net to my local computer, using a hosts file.
If I do this, I get the error "Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.". If I use localhost, all is fine. If I use the machine name, all is fine. If on the same server in development I point sqlserver.internal.companyname.net to another server with SQL on it, all works fine.
But, I don't want to have to have different code in development and production and I don't see why I have to! Exactly the same setup worked on Windows 2000 advanced server, but now I am running 2003, it does not. Any help would be gratefully accepted.
I have a SQL Server 2014 installation on a server (CHRIS-PCCHRISSQL).I have SQL Server 2014 management studio installed on local server called Pootle.I have gone through the configuration on server (CHRIS-PCCHRISSQL) inc the following:
(1) I have set up a user on CHRIS-PCCHRISSQL called sqladminuser at server level with the Server Roles of 'Public' and 'SysAdmin'
(2) The computers are both on the same homegroup.
(3) On Chris-PC , I have opened up the firewall port 1433 as Inbound Rule
(4) On Chris-PC, Within SQL Server Configuration Manager,the 'SQL Server Network Configuration for Protocols for CHRISSQL' have been set up as follows:
- The TCP protocol is enabled - I have set up IP2 as follows:
Active: Yes Enabled: No IP Addres: 192.168.0.3
However when I try to connect from SQL Server Management Studio 2014 on my local machine Pootle to Chris-PCCHRISSQL using SQL Server Authentication with the user sqladminuser
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)how to set up a remote connection from SQL Server Management Studio on my local machine Pootle to CHRIS-PCCHRISSQL
I have searched every post and tried every connection string there but can't figure out how to connect to my database on my remote server. I am using Visual Developer 2005 Express Edition in C# and uploading it to a Windows server running asp.net 2.0. The domain has not resolved yet.
I am so new to this and have followed many tutorials step by step but none of them address this issue. They just show how to upload it to the server.
Do I need to use the SQL server provided by my host or can the database stay in the App_Data folder?
When I debug a page I get the <customErrors mode="Off"/> error message even thought I have already set it in my remote web.config file which may be causing problems itself:
Hi, I have been creating a web store, which we will be hosting on our Windows Server 2003 system. I am also writing a windows application that will be running on our client systems on the same network/domain. I have no need to allow internet access to the database, just within our domain. Pretty much the windows application will be running and whenever a customer places an order, the program will automatically pop-up the needed information for our credit card processing, and shipping department. So far I have been able to establish a connection to our server by creating a data connection under the server explorer. However, it does not list any databases whatsoever, the web site has been published using Visual Studio 2005 Professional on the server, and is in 100% working order. I have searched and haven't found anything concrete on this, i'm sure its just something simple that im missing. It appears that the server is definetely connected to the database (since the website is fully functional), but it is not listing the information for other systems to access it. If anyone has any ideas, please let me know. Thank you
My connection string (to a remote instance of SQL Server Exress 2005) is exactly the same when the web files are located on my local machine or my remote machine, and while it works fine when I use the local web files, I get the following error when I use the remote files:
"Named Pipes Provider: Could not open a connection to SQL Server [53]"
As you can see, since it works from the local version, I've setup SQL to accept remote connections via TCP/IP and Named Pipes. I'm using IIS7 on the local, and IIS6 on the remote, in case that makes a difference. I have other sites setup the same way, which work fine.
I installed SQL reporting services 2005 and successfully configured reporting services.After designing the report using Bussiness Intelligence Studio, i tried to deploy my reporting services application to the localhost , I got the below mentioned error :
TITLE: Microsoft Report Designer ------------------------------
A connection could not be made to the report server http://localhost/ReportServer.
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. (Microsoft.ReportingServices.Designer)
------------------------------
The request failed with HTTP status 404: Not Found. (Microsoft.ReportingServices.Designer)
We have a 64-bit VM server running SQL Server 2005. The SQL Server on this particular VM server has 6 local instances installed. On the Management Studio logon screen I can type the full name of the local instance and connect to it, however if I press the drop down in the Server name field, choose Browse and select the Local Servers tab there is nothing listed under Database Engines.
Any idea why the 6 local instances don't show up under Database Engines? This is preventing me from installing a vendor application because their installer looks for local SQL Server instances on this server, but if SQL Server won't even show the local instances then the installer doesn't see them either.
I am facing a problem in connecting to the local database with server name as (local).
I have installed SQL Server 2005 in my machine. When I try to connect to the SQL server with the server name as SUNILKUMAR I am able to connect but when I try to connect to the same server with the server name as (local) I am not able to connect. SUNILKUMAR is my machine name and SQL server is running locally.
if anyone can help me what is the problem in this case it is highly appriciated.
My goal is to develop the system on a windows application and pda
There is a central server which will create a publication called inventory
The laptops which host the windows application will be subscribers to the central server using merge replication
The client now wants the PDA using SQL Mobile to synchronize with the local subscirber database on the laptop using active sync. They dont want to do it via WIFI to the IIS Server at the central server
I have been reading for days and I am still unsure whether this is possible to do.
I know Appforge provide a conduit for palm to access synchronization but not local sql databases
Being a very novice SQL Server administrator, I need to ask the experts a question.
How do I go about moving a database from 1 drive to another? The source drive (C is local to the server, but the target drive (E is on a Storage Area Network (SAN), although it is still a local drive for the server. I want to move the database from C: to E:. Can someone provide me with instructions?
I added a connection (ADO.NET) object by name testCon in the connection manager - I wanted to programmatically supply the connection string. So I used the "Expressions" property of the connection object and set the connectionstring to one DTS variable. The idea is to supply the connection string value to the variable - so that the connection object uses my connection string.
Then I added a "Backup Database Task" to my package with the name BkpTask. Now whenever I try to set the connection property of BkpTask to the testCon connection object, by typing testCon, it automatically gets cleared. I am not able to set the connection value.
Then after spending several hours I found that this is because I have customized the connection string in testCon. If I don't customize the connection string, I am able to enter the "testCon" value in the connection property of the BkpTask.
I have a package that uses a for loop to iterate through an unknown amount of excel files and pull their data into a table. However, there will be cases when the file is corrupted or has some sort of problem so that either the transformation will fail or the excel data source will fail with an oledb connection error. Could anyone suggest a clean way to trap these errors? Specifically, the "Cannot Aquire Connection from Connection Manager", which is the excel connection.
All -- Please help. I have some questions about connection strings.
BACKGROUND...
Note that I am using the "SQL Native Client OLE DB Provider", SQL Sever 2005 Express, ASP.NET, C#.NET, and VS.NET 2005. Note that I do not want to use the "Attach a database file" type of connection string. Note that I am using the site http://www.ConnectionStrings.com as a reference. Note that this "Standard security" connection string...<add name="LocalSqlServer" connectionString="Server=MYTESTOFFICESERVERS;Database=MyDatabase;Uid=MyDatabaseUser;Pwd=MyDatabasePassword;" />...does not work and causes the following run-time error...A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) Note that this "Trusted connection" connection string...<add name="LocalSqlServer" connectionString="Server=MYTESTOFFICESERVERS;Database=MyDatabase;Trusted_Connection=yes;" />...works but is less-than ideal because it uses a Trusted Connection rather than a Username/Password combination.
QUESTIONS... (A) What exactly does the error in Item 4 mean? (B) Do 4 and 5 imply that one must use a Trusted_Connection for all SQL Server 2005 Express connection strings when the database does not reside in the web application's App_Data folder or use a "Attach a database file" type of connection string? (C) Are there any alternatives? (D) What do you suggest?
Hi, I'm having a BIG problem, this is my 3rd day looking for answer !I'm trying to create a custom membership provider with MS SQL database 2005 but not the default ASPNETDB. I've changed the web.config to be as following:<connectionStrings><add name="sqlConn" connectionString="Data Source=.;Integrated Security=True;Initial Catalog=ASPNETDB;"providerName="System.Data.SqlClient" /></connectionStrings> <system.web><trace enabled="true" /><roleManager enabled="true" /><authentication mode="Forms" /> <membership defaultProvider="MySqlProvider"><providers><remove name="AspNetSqlProvider"/><add name="MySqlProvider" connectionStringName="SqlConn" type="System.Web.Security.SqlMembershipProvider" applicationName="/" /></providers></membership> But when I try to login to the site using the login control the following error occurs: Server Error in '/etest' Application.
Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: The connection name 'LocalSqlServer' was not found in the applications configuration or the connection string is empty.Source Error:
Line 149: <roleManager> Line 150: <providers> Line 151: <add name="AspNetSqlRoleProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> Line 152: <add name="AspNetWindowsTokenRoleProvider" applicationName="/" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> Line 153: </providers>Source File: C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Configmachine.config Line: 151
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.213 It is clear that this is a prblem with my Machine.Config file - since I've "worked!" on this file for a while. But when I've checked the Machine.config file I've found the LocalSqlServer connection it is talking about! . I'm lost and I dunno what to do, can anyone help? Here is the mahine.config in case if you need it:<connectionStrings> <add name="LocalSqlServer" connectionString="data source=.;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient" /></connectionStrings> <system.data><DbProviderFactories> <add name="Odbc Data Provider" invariant="System.Data.Odbc" description=".Net Framework Data Provider for Odbc" type="System.Data.Odbc.OdbcFactory, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" /><add name="OleDb Data Provider" invariant="System.Data.OleDb" description=".Net Framework Data Provider for OleDb" type="System.Data.OleDb.OleDbFactory, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" /> <add name="OracleClient Data Provider" invariant="System.Data.OracleClient" description=".Net Framework Data Provider for Oracle" type="System.Data.OracleClient.OracleClientFactory, System.Data.OracleClient, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" /><add name="SqlClient Data Provider" invariant="System.Data.SqlClient" description=".Net Framework Data Provider for SqlServer" type="System.Data.SqlClient.SqlClientFactory, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" /> <add name="SQL Server CE Data Provider" invariant="Microsoft.SqlServerCe.Client" description=".NET Framework Data Provider for Microsoft SQL Server 2005 Mobile Edition" type="Microsoft.SqlServerCe.Client.SqlCeClientFactory, Microsoft.SqlServerCe.Client, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" /></DbProviderFactories> </system.data><system.web> <processModel autoConfig="true" /><httpHandlers /> <membership><providers> <add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="LocalSqlServer" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" applicationName="/" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression="" /></providers> </membership><profile> <providers><add name="AspNetSqlProfileProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Profile.SqlProfileProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> </providers></profile> <roleManager><providers> <add name="AspNetSqlRoleProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /><add name="AspNetWindowsTokenRoleProvider" applicationName="/" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> </providers></roleManager> </system.web>
I use SQL Server 2012 and visual studio 2010.I created SSIS Project with task "Execute Package". Control flow view as: Package1 (execute package) -> Package2 (data flow).Data flow in Package2 view as: ADO.NET source -> ADO.NET destination.
When I started Package2, it's work. I havn't errors.But when I started Package 1 I have error "Unable to get managed connection from the Connection Manager runtime". In execution log I see that ADO.NET source produced this error on verification stage. Package failed on verification stage, not on execution stage.Why when I started Package 2 it work, but when I started Package1 (and Package1 started Package2) it failed?
I am using sqljdbc41.jar to connect with MSSQL database, it is working fine on my local machine.Where as on the remote server, same class giving me error
Login failed for user '<domain><windows loginID>' My connection string is URL...
I am using sqljdbc41.jar and on 64 bit processor , I am using following command which included path for sqljdbc_auth.dll java -Djava.library.path= C: sqljdbc_4.1enuauthx64 TestDao and error is Login failed for user '<domain><windows loginID>' why it is not picking up username passed in connection string. I have 2 machines, one is local and other is remote. on both machine I login using my domain, it is working absolutely fine on local then why the error is coming on remote machine.Both the machines are identical.
When using jdbc with IntegratedSecurity, I run into this problem when the machine is not part of a domain & gets its IP address via dhcp. Is this expected behavior or a bug in the jdbc driver.
The SQLServer and client application are installed on the same machine and a local admin is logged in, running the client app.
If I change one of the two parameters mentioned above, the connection can be established leading me to believe this may be intentional for security issues. Am I correct?
