Problem With Mssql Express 2005 Connections
Jul 20, 2007
i Have this stored procedure below that creates a backujp copy of tblpersons from database db1 into another database db2 with a table1 pressing f5 to create it it goes fine up to around 5 seconds and after that the error below appears and looking at the stored procedure it is not created either. I already activated the default settings SQL Server to allow remote connections but still the error appears.
CREATE PROCEDURE makebackup
BEGIN
SELECT * INTO table1 FROM sql1.database1.dbo.tblpersons
END
GO
OLE DB provider "SQLNCLI" for linked server "amps" returned message "Login timeout expired".
OLE DB provider "SQLNCLI" for linked server "amps" returned message "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.".
Msg 126, Level 16, State 1, Line 0
VIA Provider impossible to find the module
THANKS
ALEX
View 5 Replies
ADVERTISEMENT
Sep 29, 2006
DB is developed on local computer with MSSQL 2005 Express. My host is on MSSQL 2005 workgroup. Are they compatible, because I am getting errors? Is my approach wrong?
I have tried several approaches.
A) I created a backup of database on my local, then placed a copy on the server. Then I tried to restore through Server Management Studio. I get this error.
TITLE: Microsoft SQL Server Management Studio
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
ADDITIONAL INFORMATION:
The backed-up database has on-disk structure version 611. The server supports version 539 and cannot restore or upgrade this database.
RESTORE FILELIST is terminating abnormally. (Microsoft SQL Server, Error: 3169)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=08.00.2039&EvtSrc=MSSQLServer&EvtID=3169&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
B: I also have tried copying the database. I put it in the same path as the other databases that can be read with server management studio on the server. Then, tried to get to it through server managements studio and it did not appear. So I tried to attach it. Then I received this error:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Attach database failed for Server 'MROACH1'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Could not find row in sysindexes for database ID 10, object ID 1, index ID 1. Run DBCC CHECKTABLE on sysindexes.
Could not open new database 'LodgingDB'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 602)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=602&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
C: I have also tried opening the Database, and back up file through Server Management Studio. without success.
D: I also tried Windows and Software update at microsoft update, but no updates were recommended for Version on Server.
I'm surprised this is so hard. My original data base was created in same family of software. 2005 MS SQL Express. I could use some direct help from someone experienced with this. Am I doing it wrong or are the DB versions incompatible.
Mark Roach
View 5 Replies
View Related
Jun 15, 2006
Ben writes "I have a sql script that doesn't function very well when it's executed on a SQL 2000 server.
The scrpt looks like this:
---------------------------------------------------------------------------------------------------
USE [master]
GO
IF NOT EXISTS (SELECT * FROM master.dbo.syslogins WHERE loginname = N'SSDBUSERNAME')
EXEC sp_addlogin N'SSDBUSERNAME', N'SSDBPASSWORD'
GO
GRANT ADMINISTER BULK OPERATIONS TO [SSDBUSERNAME]
GO
GRANT AUTHENTICATE SERVER TO [SSDBUSERNAME]
GO
GRANT CONNECT SQL TO [SSDBUSERNAME]
GO
GRANT CONTROL SERVER TO [SSDBUSERNAME]
GO
GRANT CREATE ANY DATABASE TO [SSDBUSERNAME]
GO
USE [master]
GO
If EXISTS (Select * FROM master.dbo.syslogins WHERE loginname = N'SSDBUSERNAME')
ALTER LOGIN [SSDBUSERNAME] WITH PASSWORD=N'SSDBPASSWORD'
GO
GRANT ADMINISTER BULK OPERATIONS TO [SSDBUSERNAME]
GO
GRANT AUTHENTICATE SERVER TO [SSDBUSERNAME]
GO
GRANT CONNECT SQL TO [SSDBUSERNAME]
GO
GRANT CONTROL SERVER TO [SSDBUSERNAME]
GO
GRANT CREATE ANY DATABASE TO [SSDBUSERNAME]
GO
USE [master]
GO
IF EXISTS (select * from dbo.sysdatabases where name = 'ISIZ')
DROP DATABASE [ISIZ]
GO
USE [SurveyData]
GO
exec sp_adduser 'SSDBUSERNAME'
GRANT INSERT, UPDATE, SELECT, DELETE
TO SSDBUSERNAME
GO
USE [SurveyManagement]
GO
exec sp_adduser 'SSDBUSERNAME'
GRANT INSERT, UPDATE, SELECT, DELETE
TO SSDBUSERNAME
---------------------------------------------------------------
I need to be converted to a script that can be executed on both MSSQL 2000 and MSSQL 2005.
I was wondering if somebody there could help me with this problem?!
Thanks,
Ben"
View 1 Replies
View Related
Sep 19, 2007
Hi all,
In my office computer network system (LAN), my Windows XP Pro PC has SQL Server Express and VB 2005 Express installed and I was granted to have the Administrator priviledge to access SQL Server Express. I tried to create a SQLCLR project in my terminal PC.
1) I tried to set up a remote connection to SQL Server Express in the following way: SQL Server EXpress => SQL Server Surface Area Configuration. In the Surface Area Configuration for Service and Connection - local, I clicked on Remote Connection of Database Engine, SQLEXPRESS and I had a "dot" on "Local and remote connections" and "Using TCP/IP only". Then I clicked on "Apply" and "OK" buttons. Then I went to restart my database engine in SQL Server Management. When I went to check SQL Server 2005 Surface Area Configuration, I saw the arrow is pointing to "Service", not to "Remote Connections"!!!??? Is it right/normal? Please comment on this matter and tell me how I can have "Remote Connecton" on after I selected it.
2) After I restarted the database engine (I guess!!), I executed the following project code (copied from a book) in my VB 2005 Express:
//////////////--Form9.vb---/////////////////
mports System.Data.SqlClient
Imports System.Data
Public Class Form9
Dim cnn1 As New SqlConnection
Private Sub Form5_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
'Compute top-level project folder and use it as a prefix for
'the primary data file
Dim int1 As Integer = InStr(My.Application.Info.DirectoryPath, "bin")
Dim strPath As String = Microsoft.VisualBasic.Left(My.Application.Info.DirectoryPath, int1 - 1)
Dim pdbfph As String = strPath & "northwnd.mdf"
Dim cst As String = "Data Source=.sqlexpress;" & _
"Integrated Security=SSPI;" & _
"AttachDBFileName=" & pdbfph
cnn1.ConnectionString = cst
End Sub
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
'Create a command to create a table
Dim cmd1 As New SqlCommand
cmd1.CommandText = "CREATE TABLE FromExcel (" & _
"FirstName nvarchar(15), " & _
"LastName nvarchar(20), " & _
"PersonID int Not Null)"
cmd1.Connection = cnn1
'Invoke the command
Try
cnn1.Open()
cmd1.ExecuteNonQuery()
MessageBox.Show("Command succeeded.", "Outcome", _
MessageBoxButtons.OK, MessageBoxIcon.Information)
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
End Sub
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
'Create a command to drop a table
Dim cmd1 As New SqlCommand
cmd1.CommandText = "DROP TABLE FromExcel"
cmd1.Connection = cnn1
'Invoke the command
Try
cnn1.Open()
cmd1.ExecuteNonQuery()
MessageBox.Show("Command succeeded.", "Outcome", _
MessageBoxButtons.OK, MessageBoxIcon.Information)
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
End Sub
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
'Declare FromExcel Data Table and RowForExcel DataRow
Dim FromExcel As New DataTable
Dim RowForExcel As DataRow
FromExcel.Columns.Add("FirstName", GetType(SqlTypes.SqlString))
FromExcel.Columns.Add("LastName", GetType(SqlTypes.SqlString))
FromExcel.Columns.Add("PersonID", GetType(SqlTypes.SqlInt32))
'Create TextFieldParser for CSV file from spreadsheet
Dim crd1 As Microsoft.VisualBasic.FileIO.TextFieldParser
Dim strPath As String = _
Microsoft.VisualBasic.Left( _
My.Application.Info.DirectoryPath, _
InStr(My.Application.Info.DirectoryPath, "bin") - 1)
crd1 = My.Computer.FileSystem.OpenTextFieldParser _
(My.Computer.FileSystem.CombinePath(strPath, "Book1.csv"))
crd1.TextFieldType = Microsoft.VisualBasic.FileIO.FieldType.Delimited
crd1.Delimiters = New String() {","}
'Loop through rows of CSV file and populate
'RowForExcel DataRow for adding to FromExcel
'Rows collection
Dim currentRow As String()
Do Until crd1.EndOfData
Try
currentRow = crd1.ReadFields()
Dim currentField As String
Dim int1 As Integer = 1
RowForExcel = FromExcel.NewRow
For Each currentField In currentRow
Select Case int1
Case 1
RowForExcel("FirstName") = currentField
Case 2
RowForExcel("LastName") = currentField
Case 3
RowForExcel("PersonID") = CInt(currentField)
End Select
int1 += 1
Next
int1 = 1
FromExcel.Rows.Add(RowForExcel)
RowForExcel = FromExcel.NewRow
Catch ex As Microsoft.VisualBasic.FileIO.MalformedLineException
MsgBox("Line " & ex.Message & _
"is not valid and will be skipped.")
End Try
Loop
'Invoke the WriteToServer method fo the sqc1 SqlBulkCopy
'object to populate FromExcel table in the database with
'the FromExcel DataTable in the project
Try
cnn1.Open()
Using sqc1 As SqlBulkCopy = New SqlBulkCopy(cnn1)
sqc1.DestinationTableName = "dbo.FromExcel"
sqc1.WriteToServer(FromExcel)
End Using
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
'Read the FromExcel table and display results in
'a message box
Dim strQuery As String = "SELECT * " & _
"FROM dbo.FromExcel "
Dim str1 As String = ""
Dim cmd1 As New SqlCommand(strQuery, cnn1)
cnn1.Open()
Dim rdr1 As SqlDataReader
rdr1 = cmd1.ExecuteReader()
Try
While rdr1.Read()
str1 += rdr1.GetString(0) & ", " & _
rdr1.GetString(1) & ", " & _
rdr1.GetSqlInt32(2).ToString & ControlChars.CrLf
End While
Finally
rdr1.Close()
cnn1.Close()
End Try
MessageBox.Show(str1, "FromExcel")
End Sub
End Class
//////////////////////////////////////////////////////////////////////////////
I got the following error messages:
SecurityException was unhandled
Request for the permission of type 'System. Security. Permissions.FileIOPermission,mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'failed that is pointing to the code statement "Dim int1 As Integer = InStr (My.Application.Info.DirectoryPath, "bin")."
Troubleshooting tips:
Store application data in isolated storage.
When deploying an Office solution, check to make sure you have fulfilled all necessary requirments.
Use a certificate to obtain the required permission(s).
If an assembly implementing the custom security references other assemblies, add the referenced assemblies to the full trust assembly list.
Get general help for the exception.
I am a new Microsoft VS.NET Express user to do the SQL Server 2005 Express and VB 2005 Express programming by using the example of a tutorial book. Please help and tell me what is wrong in my SQLCLR sep-up and project coding and how to correct the problems.
Many Thanks in advance,
Scott Chang
View 3 Replies
View Related
Apr 25, 2006
Hi!
What is the best way to migrate MSSQL 2005 Express -> MSSQL 2005 Srv?
View 4 Replies
View Related
Mar 24, 2007
I have a laptop and a desktop that I both installed VWD and SQL Express. from my laptop, i see my laptop's name in the Server Name under data connections, but on the desktop, I only see an older Win2K Server with SQL 2000 in the list. Anyone know why my desktop doesn't show it's NAME?I can create new tables, users and all that stuff from the Management area. Thanks
View 3 Replies
View Related
Jul 23, 2005
Hi all !Does someone know how many concurrent connections 2005 Express canaccommodate ? The limit on MSDE was 5 before performance drops considerably.Thanks for your help.Sebastian
View 1 Replies
View Related
Feb 20, 2007
Just upgraded to SQL Express 2005 from MSDE for Firehouse. Upgrade went great and the db is accessable and running fine. Except when not used for a while. Then I need to restart the db to allow connections of any kind. If I don't I get an error that the db is not accessable and I can't connect. Everything runs fine after until it goes to "sleep" on me again. We upgraded to make use of the 4GB limit as we were at 1.9GB and MSDE was getting a little unhappy.
Any suggestions? Is this a "feature" and if so, is there a script I can run to kick it into working mode again?
Thanks
Chris
View 1 Replies
View Related
Aug 31, 2006
number of connectios tcp/ip..........I have a 3 person but the 4 does not connect????
View 1 Replies
View Related
Jul 14, 2007
Hello, im shure this must have been up before and i apologize for that. But i wonder if there is a way to convert the SQL server express databases to MSSQL 2005 databses?
View 3 Replies
View Related
May 17, 2007
Hi Guys, how many connections does sql 2005 express allow to .mdf file. I stumpled on info on a microsoft site (actually a forum post on msdn) that sql server express allows only a single connection to an .mdf file.
Iam intrested in this because i developed reporting services reports in BIS and iam having problems. If i run a report from report manager, i have to wait for close to 20 minutes before i can be able to run my asp.net application agian. Else if i insert data or retrieve data from my asp.net application, then i have to wait again for 20 minutes or more before i can be able to run my reports else i will get an error that a connection can not be made to the database or that the database is being used by another process.
So in all cases, i have to wait for 20--30 minutes before a connection can be made to the .mdf file. i.e after running a report or after inserting or retrieving data from the database through my asp.net application.
Iam using sql sever 2005 express with advanced services and visual web developer on windows server 2003.
Any ideas or help.
View 2 Replies
View Related
Feb 27, 2006
I've developed an asp.net 2.0 web app with vs 2005 and am using a SQL Server 2005 Express database. The app works fine locally, but after uploading to the remote web server the following error occures:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
How do I go about granting remote connections to SQL Server Express?
Does the web server have to have SQL Server Express installed in order to run apps that utilize SQL Server 2005 Express databases?
Do I grant access locally on my machine or do I have to be on the web server to grant remote connections?
I've been using .net 1.1 with access databases for the past couple of years, so this is all new to me.
Thanks.
View 27 Replies
View Related
Aug 15, 2006
Hello. I have SQLEXPRESS 2005 installed on my laptop running Windows XP Home Edition with SP2. I have an application that can connect to the local instance with no problem. The other day, I tried to configure SQLEXPRESS 2005 for a remote connection from my desktop. To date, I have been unable to figure out how to do this.
I have followed the instructions posted at various locations on the internet, but to no avail. While I can configure SQLEXPRESS 2005 to allow TCP/IP connections, I have been unable to restart the server.
Here is the pertinent snippet from the error log:
<time> Server A self-generated certificate was successfully loaded for encryption.
<time> Server Error: 26024, Severity: 16, State: 1.
2006-08-14 21:02:27.18 Server Server failed to listen on 'any' <ipv4> 0. Error: 0x277a. To proceed, notify your system administrator.
<time> Server Error: 17182, Severity: 16, State: 1.
<time> Server TDSSNIClient initialization failed with error 0x277a, status code 0xa.
<time> Server Error: 17182, Severity: 16, State: 1.
<time> Server TDSSNIClient initialization failed with error 0x277a, status code 0x1.
<time> Server Error: 17826, Severity: 18, State: 3.
<time> Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
<time> Server Error: 17120, Severity: 16, State: 1.
<time> Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I have a feeling this problem is due to the way my system is configured, not necessarily how my SQLEXPRESS 2005 is configured. My laptop and desktop are connected via a wireless router, and both machines are running Norton Anti-Virus 2006. I've added sqlserver.exe and sqlbrowser.exe to the exceptions list for the Worm protection on the laptop, i.e., the server machine. There's not a setting at the router that would prevent the server from re-starting, is there?
Any help is GREATLY appreciated!
Matt
View 15 Replies
View Related
Sep 10, 2007
Hi,
I'd like to get the experts' advice on whether SQL server 2005 Express edition (SSE) is suitable for medium scale web applications.
I have looked through the reviews of SSE. From what I understand, its limitations over the MSSQL 2005 Standard are:
1. SSE limits database size to 4GB and memory to 1GB.
2. Support for only 1 CPU.
3. No analysis or reporting services.
4. No full text indexing
5. No SQL Agent.
I have a web application that is currently running on a shared web host with a shared MSSQL 2000 database. I'm thinking of shifting to a Virtual Private Server, where I can install SSE for free.
Currently my app has about 14,000 page views a month, and each of them pulls out data from the database. I don't use any analysis or reporting services, or full text indexing or SQL Agent (for now).
My questions:
1. Is 1GB memory sufficient for this type of application?
2. Is there any reason I should not be using SSE for my type of application?
Thanks in advance for the help.
View 5 Replies
View Related
May 23, 2007
How can I connect to a MSSQL 2005 database with MS VB Studio Express?
View 1 Replies
View Related
Jul 5, 2006
Hi,
Does anybody know if MSSQL 2000 and SQL Server 2005 Express Edition can live together on the same machine?
I need to keep MSSQL 2000 up and running while evaluating the SQL Server 2005 Express Edition.
Thank you,
Paul
View 2 Replies
View Related
Nov 6, 2006
Hi,
i have installed MS SQL Server Express 2005 on my local machine. Also the managment Studio. I can connect to the MS SQL Server Express 2005 with my c# programm and with the mangament studio.
I have in Windows/system32 the file ntwdblib.dll version 2000.80.2039.0. The TCP/IP and Ip Protocl are active. But i cant connect with php to the local MS SQL Server Express 2005.
My php code is:
mssql_connect('192.168.0.2,1433', 'martin', '');
I get the return code Warning: mssql_connect() [function.mssql-connect]: Unable to connect to server: 192.168.0.2,1433 in c:InetpubwwwrootProjekteSkriptemssql_connection.php on line 2
Does anyone know what i made wrong or i have forgotten?
mfg martin
View 5 Replies
View Related
Jun 1, 2008
I am new to mssql
I am not sure when I should use windows authentication and when to use sql server authentication
I set it to sql server installation when sql server was installed
I am using it right now on xp-pro platform on my home computer but I also have a website where I would like also to use it
right now I do not have problem accessing the server with windows authentication but I keep getting errors when I switch to sql server authentication
Your help is appreciated
Dory
View 5 Replies
View Related
Mar 18, 2008
I need to install the 'MSSQL 2005 Express Client' on a computer that will be hosting a copy of an MSSQL 2005 Standard Edition database.
Question: Should I install both the DataBase Services feature and the Client Components feature?
Many thanks, for your help on this.
View 4 Replies
View Related
Jan 26, 2007
Hi, just wondering if anyone noticed the MSSQL Express 2005 is so inconsistent with its performance. I was testing out a query with 2 joins, with the main table having about 13,600,000 records. With the same criteria value, sometimes it finished executing in 3 secs. sometimes almost a 1 min.
Could it be just the volume of the data? This is really driving me crazy!
Any advise will be greatly appreciated.
Rick..
View 2 Replies
View Related
Feb 2, 2007
Hello, we are running MSSQL 2005 express on a windows 2003 machine. I have looked in SQL Server Management Studio for close to an hour and could not find a way to setup automatic backups of databases. Where is this feature, and short tutorial would be great. Thanks!
View 1 Replies
View Related
May 15, 2008
This may be an idiotic question:
I am attempting to use Visual Web Developer Express with a connection to a SQL Express db from a non-admin account on my XP Pro SP2 machine.
I can do everything in the app under an admin login, but can't seem to configure the db to allow the non-admin account access to the db. I've tried tweaking WMI, using Network Service, Local Service, and Local System with NT AUTHORITY, individual logins, and group permissions, but I'm stuck.
Any thoughts?
View 5 Replies
View Related
Jan 1, 2008
hi ,
this is my first post on MS Forums .
Q: my question is that , i want to format a date column .. d/m/yyyy .. but there is no any format facility ..
anybody can help me here ??
View 1 Replies
View Related
Aug 26, 2006
Is there a way of extracting data from MS Excel using MS SQL Server 2005 Express?
View 1 Replies
View Related
Feb 20, 2008
Hi all.
I've had a web service developed in PHP5 running on an Apache webserver for the last 9 months. It handles a lot of XML requests and stores/reads from an MSSQL Server 2005 DB (Express, if that matters).
Occasionally, I will come across the error 'Could not connect to database'. Refreshing the page works 99% of the time removes the error and the system continues as normal. I'd say this is happening about 1/100 requests at the moment, and my client is steadily becoming more irritated by it.
As far as I know, the system settings are mainly stock. It was set up by another developer.
I'm out of ideas with regards to debugging this problem.
Can anybody shed some light, or some possible solutions?
Kind Regards,
Jomn
View 9 Replies
View Related
Nov 4, 2005
When ever I click on an MDF file in VS2005 I get the following message.
View 53 Replies
View Related
Apr 18, 2008
I deployed a package on mssql-server.
How can I save passwords for OLEDB connections of the package?
I want to launch the package from server agent according to the schedule, but I don't know how can I save passwords for connectons?
Thanks in advance.
View 8 Replies
View Related
Jan 27, 2006
I have an Excel add-in that connects to a SQL Server Express 2005database. I've decided to create a configuration piece for this add-inin Visual Studio 2005 Express. I added a data connection using the dataconnection wizard and all appeared to go well. Anyways when I attemptto open SQL Server Express to administer the database, it was corruptedand I had to restore it.I eventually got it to work correctly (I'm pretty sure I followedpretty much the same steps as before), but I was just wondering ifanyone had experienced problems like this? I find it a bit scary thatit may be that easy to corrupt the database by just creating a dataconnection.
View 2 Replies
View Related
Sep 6, 2006
Does enabling/disabling Data Execution Prevention have a performanceimpact on SQL 2000 or SQL 2005?For SQL best performance - how should I configure for:Processor Scheduling:Programs or Background servicesMemory Usage:Programs or System Cache
View 9 Replies
View Related
Mar 24, 2008
Hi,
I am a bit new to the MSSQL server. In our application, we use so many SQL queries. To imporve the performance, we used the Database enigine Tuning tool to create the indexes. The older version of the application supports MSSQL 2000 also. To re-create these new indexes, I have an issue in running these "CREATE INDEX" commands as the statements generated for index creation are done in MSSQL 2005. The statements include "INCLUDES" keyword which is supported in MSSQL 2005 but not in MSSQL 2000.
Ex:-
CREATE INDEX IND_001_PPM_PA ON PPM_PROCESS_ACTIVITY
(ACTIVITY_NAME ASC, PROCESS_NAME ASC, START_TIME ASC, ISMONITORED ASC)
INCLUDE
(INSTANCE_ID, ACTIVITY_TYPE, STATUS, END_TIME, ORGANIZATION);
Any help in creating such indexes in 2000 version is welcome.
Thanks,
Suresh.
View 2 Replies
View Related
May 3, 2008
Hello
We are using SQL 2005 and now we are planning to use SQL 2000. what are the ways to do the process.
We taken the script spcificall for 2000 and run it in SQL 200. But we are getting the error in SCRIPT?
Could you please give me the step to do?
Thanks,
Sankar R
View 6 Replies
View Related
Sep 8, 2007
Hi
I have VC++ express and MSSQL SMS express and have an application working nicely locally. The Data explorer and data connections part works really easily.
Now, I want to make the application available to my home network.
I mapped the drive where the database is and called it Z: so I could put my "release" on my other network PC and assumed it would find Z: if I mapped the shared network drive on that machine and called it Z:
But: I can't even add the mapped connection on the local machine, I get:
The file "Z:databasescalorie.mdf" is on a network path not supported for database files. An attempt to attach.....etc"
It works fine on the original F drive.......
Am I approaching this the wrong way. How should I distribute to network PCs?
thanks hopefully
David
View 5 Replies
View Related
Nov 17, 2007
I've been tasked to move our production databases on MSSQL 2000 to 2005. I've supported MSSQL since version 6.5 and performed migrations to successor versions.
Current Environment is MSSQL 2000 32-bit with current Service Packs.
I've performed mock migrations on Test servers upgrading all Production instances simultaneously from MSSQL 2000 to 2005 32-bit. The Test environment is identical to Production minus server name, IP etc. Also I have a separate server with MSSQL 2005 installed where I use the DETACH / ATTACH and BACKUP / RESTORE method for migration / acceptance testing. There are approximately 30 databases totaling 70 GB. This has gone as expected and fairly successful. Vendors have been coordinated with to update code and staff for acceptance testing.
I'd prefer going directly to MSSQL 2005 64-bit instead if possible due to memory benefits etc. This is where I'd like some feedback prior to borrowing a 64-bit server for testing.
Upgrade options:
1. Is it better to migrate from MSSQL 2000 32-bit to 2005 64-bit via:
a. DETACH / ATTACH
b. BACKUP / RESTORE
c. Is one method more advantageous relating to the end result?
2. Regarding XP clients, have issues been experienced with the default SQL Server driver or is an alternate recommended for XP clients to connect to a MSSQL 64-bit server databases?
3. If you have performed this migration and have relevant experience please pass them along.
View 3 Replies
View Related
