Procedure Runs With An Error???

May 24, 2004

This is my procedure and the error is incorrect syntax near '01'

DECLARE @returnDay int

--Looking at current date,
SELECT @returnDay = DatePart(day,GetDate())
--If is the 7th of the current moth then
If @returnDay = 24

EXEC master.dbo.xp_sendmail
@query = 'SELECT a.HospitalName,a.HospitalCode,c.ProductName,b.UnitsDiscarded,d.FateOfProducts,b. DateEntered,
b.DateCompleted,b.CompiledBy FROM test.dbo.Units b inner join Hospitals a ON (a.HospitalID = b.HospitalID)
inner join Products c ON (b.ProductID = c.ProductID)
inner join FateOfProducts d ON (d.FateID = b.FateID)
where b. DateEntered = DateAdd(month, -1, Convert(CHAR(8), GetDate(), 121) + '01') order by a.HospitalID',
@recipients=test@hotmail.com', @message='Submitting Results for the previous month',
@subject=' results for previous month', @attach_results = 'true', @separator = '/s'

SELECT @@ERROR As ErrorNumber


What am I missing here now, I am quite new to stored procedures


REgards

View 12 Replies


ADVERTISEMENT

A Procedure Runs Slow As A Job But Runs Fast Executed In A Query Window

Apr 23, 2008

Performance issue.


I have a very complex Stored Procedure called by a Job that is Scheduled to run every night.
It's execution takes sometimes 1 or 2 hours and sometimes 7 hours or more.

So, if it is running for more than 4 hours I stop the Job and I run the procedure from a Query Window and it never takes more than 2 hours.

Can anyone help me identify the problem ? I want to run from the Job and not to worry about it.

Some more information:
- It is SQL 2000 Enterprise with SP4 in a Cluster (It happens the same way in any node).
- The SQL Server and SQL Agent services run using a Domain Account that have full Administrative access.
- When I connect to a Query Window I also use a Windows Account.

- There is no locks or process bloking or being blocked while the job is running.
- Using the Task Manager the processor activity is ok, no more than 30 % in any processor.

View 15 Replies View Related

Stored Procedure Just Runs And Runs

Oct 9, 2001

I have a stored proceedure (which I will tag on at the end for those interested) which is taking at least 15 minutes to run when executed, but completes in 1 minute when the tsql statement is run in Query Analyser. Why is this?

I suspect that it may be connected to table indexing, but why then is this bypassed when QA is used?

Any advice appreciated.

Derek


************************************************** ***********************
IF EXISTS (SELECT * FROM sysobjects WHERE id = object_id(N'dbo.sp_ValidateAIGL') AND OBJECTPROPERTY(id, N'IsProcedure') = 1)
DROP PROCEDURE dbo.sp_ValidateAIGL
GO

CREATE PROCEDURE dbo.sp_ValidateAIGL
@IGLPeriodIDInt,
@IGLProgramIDInt

AS
/* ************************************************** ************************
Name:sp_ValidateIGL
Author:CL
Date:19-Jan-2001
Notes:
************************************************** ************************ */

--SET NOCOUNT ON

DECLARE@TaxYearChar(5),
@FrequencyChar(1),
@PeriodNo Int,
@ProgramLogIDInt

SELECT@TaxYear = TaxYear,
@PeriodNo = PeriodNo,
@Frequency = Frequency
FROMtbl_IGLPeriods
WHEREIGLPeriodID = @IGLPeriodID

SELECT @ProgramLogID = (SELECT ProgramLogID FROM tbl_SYSProgramLogs WHERE IGLProgramID = @IGLProgramID AND IGLPeriodID = @IGLPeriodID)

CREATE TABLE #IGLErrors
(
KeyFieldChar(24),
ErrorIDInt,
DescriptionVarChar(255)
)

-- *** Global Non Program Specific Data Errors ***
-- CHECK - that there are records in the DEB_IGL_PAYROLL_OUTPUT file.....none and the routine failed...
IF NOT EXISTS(SELECT * FROM tbl_OUT_Payroll WHERE IGLProgramID = @IGLProgramID)
INSERT INTO #IGLErrors SELECT NULL, 100, 'No records were processed by the IGL run!'

SELECT * FROM #IGLErrors

-- CHECK - search for any records where the employee's EXPENSE_CODE is NULL
INSERT INTO #IGLErrors
SELECT DISTINCT
NULLIF(EmpNo, ''),
2,
'Employee "' + COALESCE(NULLIF(RTRIM(EmpNo), ''),
'<Missing Employee>') + '" (Organisation Unit - ' + COALESCE(RTRIM(OrgUnitCode),
'<No Organisation Unit>') + ') does not have a EXPENSE_CODE Code.'
FROM tbl_OUT_Payroll
WHERE NULLIF(ExpenseCode, '') IS NULL
ANDIGLProgramID = @IGLProgramID

SELECT * FROM #IGLErrors
-- CHECK - check that the BALANCE of DEBITs match the balance of CREDITs
IF (SELECT SUM(Cash) FROM tbl_OUT_Payroll WHERE IsCredit = 1 AND IGLProgramID = @IGLProgramID) <> (SELECT SUM(Cash) FROM tbl_OUT_Payroll WHERE IsCredit = 0 AND IGLProgramID = @IGLProgramID)
INSERT INTO #IGLErrors SELECT NULL, 3, 'The total cash value for DEBIT elements does not match the total cash for CREDIT elements.'

SELECT * FROM #IGLErrors
-- *** Program 1 and 2 errors ***
IF @IGLProgramID IN (1, 2)
BEGIN
-- CHECK - search for any records where the employee's COST_CENTRE is NULL
INSERT INTO #IGLErrors
SELECT DISTINCT
NULLIF(EmpNo, ''),
1,
'Employee "' + NULLIF(RTRIM(EmpNo), '') + '" (Organisation Unit = ' + RTRIM(OrgUnitCode) + ') does not have a COST_CENTRE Code.'
FROM tbl_OUT_Payroll
WHERE NULLIF(CostCenter, '') IS NULL
ANDIGLProgramID = @IGLProgramID

SELECT * FROM #IGLErrors

-- Check for EMPLOYEEs that were not transfered to the PAYROLL output (usually caused by missing ORG_UNITs or not picked up in
-- the DEB_VIEW_APPOINTEE view...)
INSERT INTO #IGLErrors
SELECT DISTINCT
EMP_NO,
11,
'Employee "' + RTRIM(EMP_NO) + '" was excluded from the summary. Check their Organisation Unit codes!'
FROM PSELive.dbo.COSTING_OUTPUT
WHERENOT EMP_NO IN (SELECT DISTINCT EmpNo FROM tbl_OUT_Payroll WHERE IGLProgramID = @IGLProgramID)
ANDPERIOD_NO = @PeriodNo
ANDTAX_YEAR = @TaxYear

SELECT * FROM #IGLErrors

-- Check that there are no ELEMENTS in the COSTING_OUTPUT table that don't exist in the tbl_IGLElements table
INSERT INTO #IGLErrors
SELECT DISTINCT
ELEMENT,
12,
'Element "' + RTRIM(ELEMENT) + '" does not exist in the IGL Interface Elements table!'
FROM PSELive.dbo.COSTING_OUTPUT
WHERE ELEMENT NOT IN
(
SELECT DISTINCT Element
FROM tbl_IGLElements
)
ANDPERIOD_NO = @PeriodNo

SELECT * FROM #IGLErrors

END

-- *** Add a error to indicate the number of errors ***
IF EXISTS (SELECT * FROM #IGLErrors)
INSERT INTO #IGLErrors
SELECT 0,
0,
'Warning, there are ' + CAST(Count(*) AS VarChar(5)) + ' recorded errors!'
FROM#IGLErrors

-- Transfer the records to the ErrorsLog table ready for the user to view...
DELETE FROM tbl_SYSErrorsLog
INSERT INTO tbl_SYSErrorsLog (IGLProgramID, OutputLogID, KeyField, ErrorID, Description)
SELECT@ProgramLogID,
@IGLPeriodID,
KeyField,
ErrorID,
Description
FROM #IGLErrors
ORDER BY ErrorID

DROP TABLE #IGLErrors

SELECT *
FROM tbl_SYSErrorsLog
ORDER BY ErrorID

--SET NOCOUNT OFF

GO
GRANT EXECUTE ON dbo.sp_ValidateAIGL TO Public
GO

View 2 Replies View Related

SQL Server 2014 :: Error Running Stored Procedure From SSIS Runs Fine In SSMS?

Mar 23, 2015

I have simple query which creates tables by passing database name as parameter from a parameter table .

SP1 --> creates databases and calls SP2--> which creates tables . I can run it fine via SSMS but when I run it using SSIS it fails with below error .The issue gets more interesting when it fails randomly on some database creation and some creates just fine .

Note** I am not passing any database of name '20'

Exception handler error :

ERROR :: 615 :: Could not find database ID 20, name '20'. The database may be offline. Wait a few minutes and try again. ---------------------------------------------------------------------------------------------------- SPID: 111 Origin: SQL Stored Procedure (SP1) ---------------------------------------------------------------------------------------------------- Could not find database ID 20, name '20'. The database may be offline. Wait a few minutes and try again. ----------------------------------------------------------------------------------------------------

Error in SSIS

[Execute SQL Task] Error: Executing the query "EXEC SP1" failed with the following error: "Error severity levels greater than 18 can only be specified by members of the sysadmin role, using the WITH LOG option.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.I have sysadmin permission .

View 6 Replies View Related

Procedure Compiles And Runs But...!!!!!!!!!!!!

May 13, 2002

My procedure compliles and runs. l 'm running it as 'exec Statement' it should prompt me for the start and end date but it does not. Where
have l gone wrong in my logic l've declared all the variables need. Please advice


if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[Statement]')
and OBJECTPROPERTY(id, N'IsProcedure') = 1)
drop procedure [dbo].[Statement]
GO

SET QUOTED_IDENTIFIER ON
GO
SET ANSI_NULLS ON
GO


Create Procedure Statement
As
Begin

declare @Startdate As datetime
declare @Enddate As datetime

declare @Customer_No As char(15)
declare @loanno As char(15)

declare @transaction_date As datetime
declare @transaction_type As char(3)
declare @reference As varchar(20)
declare @notes As varchar(255)
declare @transaction_amount As decimal (9,2)
declare @transaction_description As varchar(50)

declare @debit_amount As decimal (9,2)
declare @credit_amount As decimal (9,2)
declare @counter As int
declare @balance As decimal (9,2)
declare @user_changed As char(8)


declare c2 CURSOR FOR
SELECT loan_no
FROM loan
where customer_no = @Customer_No
ORDER BY loan_no

OPEN c2
FETCH NEXT FROM c2 INTO @loanno

-- Check @@FETCH_STATUS to see if there are any more rows to fetch.
WHILE @@FETCH_STATUS = 0
BEGIN

declare c1 CURSOR FOR
SELECT transaction_record.loan_no,
transaction_record.transaction_date,
transaction_record.transaction_type,
transaction_record.reference_no,
transaction_record.notes,
transaction_record.transaction_amount,
transaction_type.[description]
FROM transaction_record
inner join transaction_type
on transaction_type.transaction_type = transaction_record.transaction_type
where loan_no = @loanno and transaction_Date between @startdate and @enddate and transaction_amount <> 0
ORDER BY transaction_date

OPEN c1
FETCH NEXT FROM c1
INTO @transaction_date,
@transaction_type,
@reference,
@notes,
@transaction_amount,
@transaction_description

-- Check @@FETCH_STATUS to see if there are any more rows to fetch.
WHILE @@FETCH_STATUS = 0
BEGIN
If (@transaction_amount < 0)
Begin
set @credit_amount = @transaction_amount
set @debit_amount = 0
End
Else
Begin
set @debit_amount = @transaction_amount
set @credit_amount = 0
End

If (@counter = 0)
Begin
set @balance = @transaction_amount
End
Else
Begin
set @balance = @balance + @transaction_amount
End

insert into Statement (customer_no,loan_no,
transaction_date,transaction_type,transaction_desc ription,
reference, notes, debit_amount, credit_amount, balance,
user_changed, transaction_no)

Values (@Customer_No,
@loanno,
@transaction_date,
@transaction_type,
@transaction_description,
@reference,
@notes,
@debit_amount,
@credit_amount,
@balance,
@user_changed,
@counter)

set @counter = @counter+1

FETCH NEXT FROM c1
INTO @transaction_date,
@transaction_type,
@reference,
@notes,
@transaction_amount,
@transaction_description
End
CLOSE c1
DEALLOCATE c1

FETCH NEXT FROM c2 INTO @loanno
End
CLOSE c2
DEALLOCATE c2
END;
Go

View 1 Replies View Related

Stored Procedure Runs Slow Only Sometimes

Jan 6, 2006

When i execute a stored procedure it generally takes about half a second to run but sometimes it takes 20 to 30 seconds.  I am the only one using the server so I know it is not due to other traffic.  I have looked at Profiler and nothing looks out of the ordinary.  Another observation is that the slow ones are always near eachother.  I will have about 10 fast executions and then 3 slow ones and then back to fast ones.  Has anyone seen anything like this before? 

View 5 Replies View Related

Stored Procedure Runs Very Long

Jan 22, 2008

I think I may need help with query optimization.

We have a customer table and an address table. Each customer can have 1 or more addresses in the address table.

The task is to synchronize customer information from 2 entirely separate systems. I have a stored procedure that reads a text file (exported from the 'master' system) and updates all the customer records in the second system (which is in the sql server db). The queries themselves work. The data is accurate. My issue is with how long it takes the stored procedure to run. With over 11,000 records in the text file, the stored procedure sometimes takes over 3 hours to run.

That seems excessive to me. (and probably to those of you snickering in the back)

As an overview: my stored procedure does the following.

1) creates a temp table
2) dumps the data from the text file into the temp table
3) updates the address table with data from the temp table (records already there)
4) inserts records into the address table from the temp table (records not already there)
5) updates the customer table with an address id
6) drops the temp table

Any help/suggestions is appreciated. If you need more info, let me know.

View 10 Replies View Related

Query In Stored Procedure Runs Too Fast

Jan 8, 2008

Ok, I'll admit right off the bat that I never suspected that I'd ever raise this complaint, much less worry about how to fix the "problem" associated with it!

We're preparing to take a large set of changes (projects) to PeopleSoft Financials from development to test. The code is still somewhat rough, but it has been "desk checked" to ensure that it does what the developers think that it ought to do, and they've blessed it at that point. The code is now moving into the test phase, and the QA team is finding locking/blocking issues that we've never seen in this code before... Sort of a "lock avalanche" where no one process locks for very long, but many of them block one another to the point where applications actually "freeze" while almost never hitting a deadlock.

My solution was to create a "blitzkrieg" query / stored procedure that would periodically sample master.dbo.sysprocesses, master.dbo.sysdatabases, and apply one of the dm_ functions to gather information on locking, blocking, and deadlocking. My procedure runs nicely (it never hangs) and gets about 99.3% of the data that I want.

The problem is that the blasted query / stored procedure runs either too fast or too slow, depending on how you look at it. Because the dm_ function takes a few ms to run, there can be a situation where either a row appears as a false positive or as a missing row because of timing... Either the culprit shows up as a blocker, but by the time the victim spid is evaluated the block has cleared, or the row is skipped and by the time the victim is evaluated the block has occured.

The whole process runs in well under 100 ms when there is nothing to report, and I've never seen it run 200 ms yet under the worst conditions it has faced, so the code is fast... The problem is that I really don't want to try to enforce any kind of locking to resolve the issue, because that locking would impact performance and that is EXACTLY what I do NOT want to do.

Any suggestions?

-PatP

View 8 Replies View Related

Stored Procedure Runs Manually But Fails As A Job

Oct 8, 2007

I have a stored procedure that syncs 2 databases. It runs fine if I go into the stored procedures and execute it manually, there are a few errors but it doesnt choke on them it completes with the desired end result. However if I create a job to run this dbo, it fails, The error log shows this:

Date,Source,Severity,Step ID,Server,Job Name,Step Name,Notifications,Message,Duration,Sql Severity,Sql Message ID,Operator Emailed,Operator Net sent,Operator Paged,Retries Attempted
10/03/2007 16:06:00,sync,Error,0,MACHINENAME,sync,(Job outcome),,The job failed. The Job was invoked by User MACHINENAMEAdministrator. The last step to run was step 1 (sync).,00:00:19,0,0,,,,0
10/03/2007 16:06:00,sync,Error,1,MACHINENAME,sync,sync,,Executed as user: companyname. ... 0) aspnet Member Exists [SQLSTATE 01000] (Message 0) DNN User Exists [SQLSTATE 01000] (Message 0) Updaing Roles __noelle(5281) [SQLSTATE 01000] (Message 0) aspnet User Exists [SQLSTATE 01000] (Message 0) aspnet Member Exists [SQLSTATE 01000] (Message 0) DNN User Exists [SQLSTATE 01000] (Message 0) Updaing Roles 0(5036) [SQLSTATE 01000] (Message 0) aspnet User Exists [SQLSTATE 01000] (Message 0) aspnet Member Exists [SQLSTATE 01000] (Message 0) New DNN User [SQLSTATE 01000] (Message 0) aspnet User Exists [SQLSTATE 01000] (Message 0) aspnet Member Exists [SQLSTATE 01000] (Message 0) DNN User Exists [SQLSTATE 01000] (Message 0) Updaing Roles 0000000(3795) [SQLSTATE 01000] (Message 0) aspnet User Exists [SQLSTATE 01000] (Message 0) aspnet Member Exists [SQLSTATE 01000] (Message 0) DNN User Exists [SQLSTATE 01000] (Message 0) Updaing Roles 007(8) [SQLSTATE 01000] (Message 0) aspnet User Exists [SQLSTATE 01000] (Message 0) aspnet Member Exis... The step failed.,00:00:19,14,3621,,,,0

So the error is 3621, and the severity is 14 which as I understand it means Insufficient Permissions.

I have already tried this:
Making the Job Agent service logon as MACHINeNAME/Administrator instead of System, giving the user here (companyname) more permissions, but I am at a loss as to why this runs ok when manually executed but fails when run as a job. I have created the job by scripting the dbo "Execute to a file" and having the job run that file as a step, I have also tried copying and pasting the code from the stored procedure into the job step. It always fails for the same reason.

I must say I am very new to SQL, I am a network admin and have inherited this database and server from another client and have to get this sync task to run daily at certain intervals.

Please can anyone shed light on this issue?
Thanks,

View 7 Replies View Related

Why Does A Query Runs Considerably Faster Than Stored Procedure?

Dec 29, 2003

I have an stored procedure that takes 23 seconds to execute. However, the same query is executed in 4 seconds.

All the tests where made using the Query Analizer.

What could be wrong?

Thanks a lot in advance.

View 13 Replies View Related

Stored Procedure Runs Diffrently In 2000 And 2005

Apr 19, 2007

Hi there everybody,

I am writing a sales managing software using C# in .NET 2005.
The program was used to work properly with sql server 2000.
I decided to write a "FILE Version" of sofware using sql server express 2005 , and detached db from 2000 , attaching it to 2005 using AttachDBFileName clause in connection string.

But the problem is when program executes something like this:
EXEC [AddOrder] ...
two rows inserted instead of one.and when I use server explorer of VS2005 to launch SP, it works fine.
I should mention again that same code works correctly when I change connection string and force it to use sqlserver 2000.

Any ideas?

Kind Regards: Ali

View 6 Replies View Related

Stored Procedure Runs In 2000, Hangs In 2005

Nov 8, 2006

I have a rather complex sp that runs for 4 minutes in SQL2000. It computes some messy oil and gas revenue/cost transactions. It involves lots of calls to functions that return single values of all types and also returns recordsets. There are all kinds of joins with temp and memory tables, etc. Just a mess, but it works. However, in SQL2005, it runs and apparently hangs, as it never ends.

I have run the Upgrade Advisor and otherwise, have not found any information that tells me that there are issues with functions or SQL-specific functions, tables, etc. that might cause this. Does anyone on this forum have some pointers on where I might look for assistance on this matter? Surely someone knows something about things working differently in 2005.

Thanks,



Jim

View 4 Replies View Related

Query Runs In Sub Second Time Until I Put It In A Stored Procedure Then It Takes 2 Minutes.

Jun 25, 2007

The query below runs in sub second time if I don't call it as a stored procedure. I have looked at the execution plan for both the query and the query as a stored procedure and they are the same.
When I put the query into a stored procedure it takes over 2 minutes to run.
All feedback (even the ugly stuff) is more than welcome. I want to master this issue and forever put it behind me.
This is the sql when I just execute it outright:1 DECLARE
2 @WebUserID nvarchar(20)
3 ,@DocumentTypeID int
4 ,@RouteID nvarchar(10)
5 ,@CustomerID nvarchar(15)
6 ,@DocumentIDPrefix nvarchar(20)
7 ,@StartDate datetime
8 ,@EndDate datetime
9 ,@OversoldOnly bit
10 ,@DexCustomersOnly bit
11 ,@DeviationsOnly bit
12 ,@CashNoPaymentOnly bit
13 ,@SignatureName nvarchar(45)
14 ,@SortExpression varchar(200)
15 ,@StartRowIndex int
16 ,@MaximumRows int
17
18 SET @WebUserID = 'manager'
19 SET @DocumentTypeID = 0
20 SET @DocumentIDPrefix = '%'
21 SET @StartDate = '04/17/2007'
22 SET @EndDate = '04/19/2007'
23 SET @OversoldOnly = 0
24 SET @DexCustomersOnly = 0
25 SET @DeviationsOnly = 0
26 SET @CashNoPaymentOnly = 0
27 SET @SortExpression = ''
28 SET @StartRowIndex = 0
29 SET @MaximumRows = 20;
30
31 WITH OrderedDocumentHistory AS
32 (
33 SELECT
34 dh.DocumentHistoryID
35 ,dh.DocumentID
36 ,dh.DocumentTypeID
37 ,dh.DocumentTypeDesc
38 ,dh.RouteID
39 ,dh.RouteDesc
40 ,dh.CustomerID
41 ,dh.CustomerName
42 ,dh.DocDate
43 ,ISNULL(dc.HasReceipt, 0) AS 'HasReceipt'
44 ,ddt.Description AS 'SignatureReason'
45 ,a.Amount
46 ,ROW_NUMBER() OVER (ORDER BY dh.DocDate DESC) AS 'RowNumber'
47 FROM
48 DocumentHistory dh
49 INNER JOIN Customers c ON dh.CustomerID = c.CustomerID
50 INNER JOIN DeviationTypes ddt ON dh.DriverDeviationTypeID = ddt.DeviationTypeID
51 INNER JOIN
52 (
53 SELECT
54 DocumentHistoryID
55 ,(COALESCE(SUM((CONVERT(INT, Units + DeviationUnits)) * (UnitPrice - UnitDiscount)) + SUM((CONVERT(INT, Cases + DeviationCases)) * (CasePrice - CaseDiscount)), 0.0)) AS Amount
56 FROM
57 DocumentHistoryItems dhia
58 GROUP BY
59 dhia.DocumentHistoryID
60 ) AS a ON a.DocumentHistoryID = dh.DocumentHistoryID
61 LEFT OUTER JOIN
62 (
63 SELECT DISTINCT
64 dca.DocumentID
65 ,1 AS 'HasReceipt'
66 FROM
67 DocumentCollections dca
68 ) AS dc ON dh.DocumentID = dc.DocumentID
69 WHERE
70 dh.DocDate BETWEEN @StartDate AND @EndDate
71 AND (dh.DocumentTypeID = @DocumentTypeID OR @DocumentTypeID IS NULL)
72 AND (dh.RouteID = @RouteID OR @RouteID IS NULL)
73 AND (dh.CustomerID = @CustomerID OR @CustomerID IS NULL)
74 AND dh.DocumentID LIKE @DocumentIDPrefix
75 AND CASE WHEN @OversoldOnly = 1 THEN ISNULL( (SELECT TOP 1 (dhio.DeviationUnits + dhio.DeviationCases) FROM DocumentHistoryItems dhio WHERE dh.DocumentHistoryID = dhio.DocumentHistoryID AND (dhio.DeviationUnits > 0 OR dhio.DeviationCases > 0)), 0) ELSE 1 END > 0
76 AND CASE WHEN @DexCustomersOnly = 1 THEN c.DEXEnable ELSE 'Y' END = 'Y'
77 AND CASE WHEN @DeviationsOnly = 1 THEN ISNULL( (SELECT TOP 1 (dhio.DeviationUnits + dhio.DeviationCases) FROM DocumentHistoryItems dhio WHERE dh.DocumentHistoryID = dhio.DocumentHistoryID AND (dhio.DeviationUnits != 0 OR dhio.DeviationCases != 0)), 0) ELSE 1 END != 0
78 AND CASE WHEN @CashNoPaymentOnly = 1 THEN dh.Terms ELSE 'CHECK/CASH' END = 'CHECK/CASH'
79 AND CASE WHEN @CashNoPaymentOnly = 1 THEN (SELECT MAX(dhio.AlcoholPct) FROM DocumentHistoryItems dhio WHERE dhio.DocumentHistoryID = dh.DocumentHistoryID) ELSE 1 END > 0
80 AND CASE WHEN @CashNoPaymentOnly = 1 THEN ISNULL(dc.HasReceipt, 0) ELSE 0 END = 0
81 AND (dh.SigName = @SignatureName OR @SignatureName IS NULL)
82 AND (c.WarehouseID IN (SELECT WarehouseID FROM WebUserWarehouses WHERE WebUserID = @WebUserID)
83 OR @WebUserID IS NULL)
84 )
85
86 SELECT
87 DocumentHistoryID
88 ,DocumentID
89 ,DocumentTypeDesc
90 ,RouteID
91 ,RouteDesc
92 ,CustomerID
93 ,CustomerName
94 ,DocDate
95 ,Amount
96 ,HasReceipt
97 ,SignatureReason
98 FROM
99 OrderedDocumentHistory
100 WHERE
101 RowNumber BETWEEN (@StartRowIndex + 1) AND (@StartRowIndex + @MaximumRows) Here is the sql for creating the stored procedure.  1 CREATE Procedure w_DocumentHistory_Select
2 (
3 @WebUserID nvarchar(20)
4 ,@DocumentTypeID int
5 ,@RouteID nvarchar(10)
6 ,@CustomerID nvarchar(15)
7 ,@DocumentIDPrefix nvarchar(20)
8 ,@StartDate datetime
9 ,@EndDate datetime
10 ,@OversoldOnly bit
11 ,@DexCustomersOnly bit
12 ,@DeviationsOnly bit
13 ,@CashNoPaymentOnly bit
14 ,@SignatureName nvarchar(45)
15 ,@SortExpression varchar(200)
16 ,@StartRowIndex int
17 ,@MaximumRows int
18 )
19 AS
20 SET NOCOUNT ON
21
22 IF LEN(@SortExpression) = 0 OR @SortExpression IS NULL
23 SET @SortExpression = 'Number DESC'
24
25 IF @StartRowIndex IS NULL
26 SET @StartRowIndex = 0
27
28 IF @MaximumRows IS NULL
29 SELECT
30 @MaximumRows = COUNT(dh.DocumentHistoryID)
31 FROM
32 DocumentHistory dh;
33
34 WITH OrderedDocumentHistory AS
35 (
36 SELECT
37 dh.DocumentHistoryID
38 ,dh.DocumentID
39 ,dh.DocumentTypeID
40 ,dh.DocumentTypeDesc
41 ,dh.RouteID
42 ,dh.RouteDesc
43 ,dh.CustomerID
44 ,dh.CustomerName
45 ,dh.DocDate
46 ,ISNULL(dc.HasReceipt, 0) AS 'HasReceipt'
47 ,ddt.Description AS 'SignatureReason'
48 ,a.Amount
49 ,CASE
50 WHEN @SortExpression = 'Number DESC' THEN (ROW_NUMBER() OVER (ORDER BY dh.DocumentID DESC))
51 WHEN @SortExpression = 'Number ASC' THEN (ROW_NUMBER() OVER (ORDER BY dh.DocumentID ASC))
52 WHEN @SortExpression = 'CustomerName DESC' THEN (ROW_NUMBER() OVER (ORDER BY dh.CustomerName DESC))
53 WHEN @SortExpression = 'CustomerName ASC' THEN (ROW_NUMBER() OVER (ORDER BY dh.CustomerName ASC))
54 WHEN @SortExpression = 'CompletedDate DESC' THEN (ROW_NUMBER() OVER (ORDER BY dh.DocDate DESC))
55 WHEN @SortExpression = 'CompletedDate ASC' THEN (ROW_NUMBER() OVER (ORDER BY dh.DocDate ASC))
56 WHEN @SortExpression = 'RouteDescription DESC' THEN (ROW_NUMBER() OVER (ORDER BY dh.RouteDesc DESC))
57 WHEN @SortExpression = 'RouteDescription ASC' THEN (ROW_NUMBER() OVER (ORDER BY dh.RouteDesc ASC))
58 END AS 'RowNumber'
59 FROM
60 DocumentHistory dh
61 INNER JOIN Customers c ON dh.CustomerID = c.CustomerID
62 INNER JOIN DeviationTypes ddt ON dh.DriverDeviationTypeID = ddt.DeviationTypeID
63 INNER JOIN
64 (
65 SELECT
66 DocumentHistoryID
67 ,(COALESCE(SUM((CONVERT(INT, Units + DeviationUnits)) * (UnitPrice - UnitDiscount)) + SUM((CONVERT(INT, Cases + DeviationCases)) * (CasePrice - CaseDiscount)), 0.0)) AS Amount
68 FROM
69 DocumentHistoryItems dhia
70 GROUP BY
71 dhia.DocumentHistoryID
72 ) AS a ON a.DocumentHistoryID = dh.DocumentHistoryID
73 LEFT OUTER JOIN
74 (
75 SELECT DISTINCT
76 dca.DocumentID
77 ,1 AS 'HasReceipt'
78 FROM
79 DocumentCollections dca
80 ) AS dc ON dh.DocumentID = dc.DocumentID
81 WHERE
82 dh.DocDate BETWEEN @StartDate AND @EndDate
83 AND (dh.DocumentTypeID = @DocumentTypeID OR @DocumentTypeID IS NULL)
84 AND (dh.RouteID = @RouteID OR @RouteID IS NULL)
85 AND (dh.CustomerID = @CustomerID OR @CustomerID IS NULL)
86 AND dh.DocumentID LIKE @DocumentIDPrefix
87 AND CASE WHEN @OversoldOnly = 1 THEN ISNULL( (SELECT TOP 1 (dhio.DeviationUnits + dhio.DeviationCases) FROM DocumentHistoryItems dhio WHERE dh.DocumentHistoryID = dhio.DocumentHistoryID AND (dhio.DeviationUnits > 0 OR dhio.DeviationCases > 0)), 0) ELSE 1 END > 0
88 AND CASE WHEN @DexCustomersOnly = 1 THEN c.DEXEnable ELSE 'Y' END = 'Y'
89 AND CASE WHEN @DeviationsOnly = 1 THEN ISNULL((SELECT TOP 1 (dhio.DeviationUnits + dhio.DeviationCases) FROM DocumentHistoryItems dhio WHERE dh.DocumentHistoryID = dhio.DocumentHistoryID AND (dhio.DeviationUnits != 0 OR dhio.DeviationCases != 0)), 0) ELSE 1 END != 0
90 AND CASE WHEN @CashNoPaymentOnly = 1 THEN dh.Terms ELSE 'CHECK/CASH' END = 'CHECK/CASH'
91 AND CASE WHEN @CashNoPaymentOnly = 1 THEN (SELECT MAX(dhio.AlcoholPct) FROM DocumentHistoryItems dhio WHERE dhio.DocumentHistoryID = dh.DocumentHistoryID) ELSE 1 END > 0
92 AND CASE WHEN @CashNoPaymentOnly = 1 THEN ISNULL(dc.HasReceipt, 0) ELSE 0 END = 0
93 AND (dh.SigName = @SignatureName OR @SignatureName IS NULL)
94 AND (c.WarehouseID IN (SELECT WarehouseID FROM WebUserWarehouses WHERE WebUserID = @WebUserID)
95 OR @WebUserID IS NULL)
96 )
97 SELECT
98 DocumentHistoryID
99 ,DocumentID
100 ,DocumentTypeDesc
101 ,RouteID
102 ,RouteDesc
103 ,CustomerID
104 ,CustomerName
105 ,DocDate
106 ,Amount
107 ,HasReceipt
108 ,SignatureReason
109 FROM
110 OrderedDocumentHistory
111 WHERE
112 RowNumber BETWEEN (@StartRowIndex + 1) AND (@StartRowIndex + @MaximumRows)
 

 Here is the code for calling the stored procedure:1 DECLARE @RC int
2 DECLARE @WebUserID nvarchar(20)
3 DECLARE @DocumentTypeID int
4 DECLARE @RouteID nvarchar(10)
5 DECLARE @CustomerID nvarchar(15)
6 DECLARE @DocumentIDPrefix nvarchar(20)
7 DECLARE @StartDate datetime
8 DECLARE @EndDate datetime
9 DECLARE @OversoldOnly bit
10 DECLARE @DexCustomersOnly bit
11 DECLARE @DeviationsOnly bit
12 DECLARE @CashNoPaymentOnly bit
13 DECLARE @SignatureName nvarchar(45)
14 DECLARE @SortExpression varchar(200)
15 DECLARE @StartRowIndex int
16 DECLARE @MaximumRows int
17
18 SET @WebUserID = 'manager'
19 SET @DocumentTypeID = 0
20 SET @DocumentIDPrefix = '%'
21 SET @StartDate = '04/17/2007'
22 SET @EndDate = '04/19/2007'
23 SET @OversoldOnly = 0
24 SET @DexCustomersOnly = 0
25 SET @DeviationsOnly = 0
26 SET @CashNoPaymentOnly = 0
27 SET @SortExpression = ''
28 SET @StartRowIndex = 0
29 SET @MaximumRows = 20;
30
31 EXECUTE @RC = [Odom].[dbo].[w_DocumentHistory_Select]
32 @WebUserID
33 ,@DocumentTypeID
34 ,@RouteID
35 ,@CustomerID
36 ,@DocumentIDPrefix
37 ,@StartDate
38 ,@EndDate
39 ,@OversoldOnly
40 ,@DexCustomersOnly
41 ,@DeviationsOnly
42 ,@CashNoPaymentOnly
43 ,@SignatureName
44 ,@SortExpression
45 ,@StartRowIndex
46 ,@MaximumRows
 

View 3 Replies View Related

Trigger Error When App Runs

Oct 5, 2005

I have SQL Server 2000, and our web application is in WebObjects.

I built a trigger on a table that indicates if certain fields in a record have been changed since the last time a report was run from the application.

This trigger runs fine through the Query Analyzer, and runs fine with a direct input through enterprise manager. However, when the WebObjects application tries to update the table, and error is thrown.

Is anyone familiar with a reason why an application would throw an error on an update, when the DB tools do not? If we disable the trigger, the application has no problem updating the table.

Here is the relevant portion of the trigger:

create trigger t_press_run_change
on dbo.press_run_line_item
for insert, update, delete
as

updatepress_run_line_item
setis_changed = 1
from deleted d
join press_run_line_item p on p.press_run_line_item_id = d.press_run_line_item_id
where(p.is_changed = 0 or p.is_changed is null)
AND ((isNull(p.print_quantity,0) <> isNull(d.print_quantity,0))
OR (isNull(p.spoilage_pct,0) <> isNull(d.spoilage_pct,0))
OR(isNull(p.ad_dimension_id,0) <> isNull(d.ad_dimension_id,0))
OR(isNull(p.quarter_fold_id,0) <> isNull(d.quarter_fold_id,0))
OR(isNull(p.max_qty_per_shipment,'') <> isNULL(d.max_qty_per_shipment,''))
OR(isNull(p.packaging_max_height,'') <> isNull(d.packaging_max_height,''))
OR(isNull(p.packaging_max_weight,'') <> isNull(d.packaging_max_weight,''))
OR(isNull(p.packaging_skids,'') <> isNull(d.packaging_skids,''))
OR(isNull(p.packaging_turns,'') <> isNull(d.packaging_turns,''))
OR(isNull(p.packaging_cartons,'') <> isNull(d.packaging_cartons,''))
OR(isNull(p.preprint_delivery_time,'') <> isNull(d.preprint_delivery_time,''))
OR(isNull(p.contact_id,0)<> isNull(d.contact_id,0))
OR(isNull(p.address_company,'')<>isNull(d.address_company,''))
OR(isNull(p.address1,'')<>IsNull(d.address1,''))
OR(isNull(p.address2,'')<>IsNull(d.address2,''))
OR(isNull(p.address_city,'')<>IsNull(d.address_city,''))
OR(isNull(p.address_state,'')<>IsNull(d.address_state,''))
OR(IsNull(p.address_zip,'')<>IsNull(d.address_zip,''))
OR(isNull(p.address_Country_id,'')<>IsNull(d.address_country_id,''))
OR(isNull(p.client_printer_id,'')<>IsNull(d.client_printer_id,'')))

View 2 Replies View Related

Error When VB Runs DTS Package

Apr 27, 2004

Hi ,

I am trying to run DTS package (stored on SQL Server) using Visual basic but i am getting the following error

Runtime error '-2147217843 (80040e4d)'

Login failed for 'MyUserID'


*************************************
i used the following code in VB program

Sub Command1_Click()
Dim dtsp As New DTS.Package
dtsp.LoadFromSQLServer _
ServerName:="MyServer", _
ServerUserName:="MyUserID", _
ServerPassword:="MyPassword", _
PackageName:="DTSDemo"
dtsp.Execute
End Sub

*************************************

I can Run the package direct from SQL server but get error by Vb program. Any idea why it is so.

Thanks

View 3 Replies View Related

Funny Error During Runs

Jan 26, 2007

Can any one please help explain why this error has happened, it is not a normal error of SSIS,

"SSIS Debug host has encountered a problem and needs to close. We are sorry for the inconvenience"

It has 2 buttons Debug and Close, this error happened in the middle of a script task.

View 1 Replies View Related

Sql Parameter Error When Runs On Server

Oct 26, 2007

When im testing in local machine... my app works fine... but when i publish it on server... the sql DateTime parameter get an error: 
ERROR ON SERVER : String was not recognized as a valid DateTime
my code:SqlConnection con = new SqlConnection(ConfigurationManager.ConnectionStrings["StringDeConexao"].ConnectionString);
SqlCommand oCmd = new SqlCommand("spcCadLjItem", con);oCmd.CommandType = CommandType.StoredProcedure;
 
oCmd.Connection.Open();SqlTransaction trans = con.BeginTransaction();
oCmd.Transaction = trans;
oCmd.Parameters.Add(new SqlParameter("@dt_exclusao", SqlDbType.DateTime));
oCmd.Parameters["@dt_exclusao"].Value = DBNull.Value;
oCmd.ExecuteNonQuery();
 When I inspect the type of parameter on my machine its ok.. SqlDbType its DateTime... and runs perfectly...Why it doesnt work when i publish on server???????
 tks!!
 

View 1 Replies View Related

Code Runs Fine On 1 Machine But On Other It Gives Error

Dec 16, 2005

Hi,
I am using Sql database in my asp.net application. the code runs fine on the machine where i m developing but when I try to run the code on other machine it gives following error--
error is related to access to database.(sql personal server is installed on local machine) I m giving the following connection string---
"Server=localhost;UID=sa;PWD=mypassword;Database=try1"
I have reinstalled the sql server  using mixed mode authentication and  the same sa password but still problem continues..
THE ERROR IT GIVES IS---
Server Error in '/try1' Application.


SQL Server does not exist or access denied. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: SQL Server does not exist or access denied.Source Error:



Line 49: SqlCommand cmdSelect;
Line 50: cmdSelect = new SqlCommand("select * FROM Departments", sqlConn);
Line 51: sqlConn.Open();
Line 52: return cmdSelect.ExecuteReader(CommandBehavior.CloseConnection);
Line 53: }Source File: c:inetpubwwwroot ry1DataAccessCode.cs    Line: 51 Stack Trace:



[SqlException: SQL Server does not exist or access denied.]
System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction)
System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction)
System.Data.SqlClient.SqlConnection.Open()
try1.DataAccessCode.getDept() in c:inetpubwwwroot ry1DataAccessCode.cs:51
try1.WebForm1.Page_Load(Object sender, EventArgs e) in c:inetpubwwwroot ry1Login.aspx.cs:35
System.Web.UI.Control.OnLoad(EventArgs e)
System.Web.UI.Control.LoadRecursive()
System.Web.UI.Page.ProcessRequestMain()


Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.573

View 3 Replies View Related

T-SQL (SS2K8) :: Proc Giving Error In One Session And Runs In Another

Nov 13, 2014

I have one drop and create procedure script in one sql session and execute the procedure in other session. Now when i am compiling the procedure in first session, it gets completed successfully.

Now when i move to other session and try to execute the procedure, it gives me error saying :

"Invalid column name 'ColumnName'."

Now when I execute the procedure in same session in which procedure was compiled, it runs successfully. Once run, I go back to my other session and it runs again.

View 9 Replies View Related

SQL 2012 :: Error Executing DTSX From SSISDB But Runs Fine When Run It Manually

Sep 12, 2014

When i run it from sql server data tools on the test box it runs fine. However when i run it from the ssisdb directly i get the below error.

reload table tablename1 from Excel file:Error: The "filetoload.Outputs[Excel Source Output].Columns[Product]" failed because truncation occurred, and the truncation row disposition on "filetoload.Outputs[Excel Source Output].Columns[Product]" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.

reload table t from Excel file:Error: There was an error with filetoload.Outputs[Excel Source Output].Columns[Product] on filetoload.Outputs[Excel Source Output]. The column status returned was: "Text was truncated or one or more characters had no match in the target code page.".

View 1 Replies View Related

Why Does Error Log Show Database Restarting Everytime A Transactionlog Backup Runs?

Feb 11, 2008

Why does Error log show database restarting everytime a transactionlog backup runs?It also runs a checkdb as well.The log backups are scheduled through a maintenance plan.Is this normal?

View 1 Replies View Related

Lookup Fails When Package Runs In Development On Another PC Than The One Where It Was Created Error: 0xC020824E

Feb 27, 2007

Hi all,

I try to make SSSIS packages made on my pc accesible to an other user of SSIS (both running on Windows 2000). The packages are on a shared drive in our LAN.. Some configurationfiles are use to configure the Oracle DBconnection.The same files are on the same location on both PC's

The other user can open and run the packages but from the moment the lookup buffers are loaded, we get the following errors:

Error: 0xC0202009 at AB_ADDRESS_DF, LOOKUP_POST_ID [22801]: An OLE DB error has occurred. Error code: 0x80004005.

An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80004005 Description: "".

Error: 0xC020824E at AB_ADDRESS_DF, LOOKUP_POST_ID [22801]: OLE DB error occurred while populating internal cache. Check SQLCommand and SqlCommandParam properties.

Error: 0xC004701A at AB_ADDRESS_DF, DTS.Pipeline: component "LOOKUP_POST_ID" (22801) failed the pre-execute phase and returned error code 0xC020824E.

Any suggestion would be most welcome.

View 3 Replies View Related

Package Runs Fine From BIDS But Dtexec On Same Box Gives Insufficient Product Level Error

Mar 16, 2006

Running eval. edition of Sql Server Standard 2005. "Insufficient product level" error is thrown during validation phase of an OleDBCommand data flow task. This task type is not licensed in Sql Server 2005 standard? The component runs a very simple sql update statement against a one row table in Sql Server 2005.

If it works from BIDS, should it not work from dtexec.exe on the same box?

Does dtexec run under the security context of the logged in user?

Thanks,

Ken

View 6 Replies View Related

SSIS Package That Runs Fine Through Command Prompt, XML Error When Run Through SQL Server Agent Job CmdExec

Aug 17, 2006

I have an SSIS package that runs fine through command pormpt although when I try to run it from a SQL Servr Agent Job CmdExec step it bombs out.  Please help this has me stumped...the SSIS package uses an XML connection string so certain key settings such as connection strings and email info can be changed easily.  Currently this is all on the same machine.  I have not moved it beyond where I am developing.

 

On the command line I am using the following command...

dtexec /F "S:connectionscontacts.dtsConfig" /DE "password"

 

Below is the output log...

 

Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.

Started:  6:59:40 PM
Progress: 2006-08-16 18:59:41.29
   Source: Data Flow Task
   Validating: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.29
   Source: Data Flow Task
   Validating: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.71
   Source: Data Flow Task
   Validating: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.73
   Source: Data Flow Task
   Validating: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.77
   Source: Data Flow Task
   Validating: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.77
   Source: Data Flow Task
   Validating: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.77
   Source: Data Flow Task
   Validating: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.77
   Source: Data Flow Task
   Validating: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.79
   Source: Data Flow Task
   Prepare for Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.79
   Source: Data Flow Task
   Prepare for Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.79
   Source: Data Flow Task
   Prepare for Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.79
   Source: Data Flow Task
   Prepare for Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.81
   Source: Data Flow Task
   Pre-Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.84
   Source: Data Flow Task
   Pre-Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.90
   Source: Data Flow Task
   Pre-Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.90
   Source: Data Flow Task
   Pre-Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.92
   Source: Data Flow Task
   Post Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.92
   Source: Data Flow Task
   Post Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.92
   Source: Data Flow Task
   Post Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.92
   Source: Data Flow Task
   Post Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.92
   Source: Data Flow Task
   Cleanup: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.93
   Source: Data Flow Task
   Cleanup: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.93
   Source: Data Flow Task
   Cleanup: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.93
   Source: Data Flow Task
   Cleanup: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.95
   Source: Send Mail Task
   The SendMail task is initiated.: 0% complete
End Progress
Progress: 2006-08-16 18:59:42.09
   Source: Send Mail Task
   The SendMail task is completed.: 100% complete
End Progress
DTExec: The package execution returned DTSER_SUCCESS (0).
Started:  6:59:40 PM
Finished: 6:59:42 PM
Elapsed:  1.984 seconds

 

 

When I try to use the same command within SQL Server Agent Job using a CmdExec step I get the following error...

 

Description: The package is attempting to configure from the XML file "S:connectionscontacts.dtsConfig".  End Info  Warning: 2006-08-16 18:40:03.15     Code: 0x80012012     Source: contactsPackage Description: The configuration file name "S:connectionscontacts.dtsConfig" is not valid. Check the configuration file name.  End Warning  Warning: 2006-08-16 18:40:03.15     Code: 0x80012059     Source: contactsPackage Description: Failed to load at least one of the configuration entries for the package. Check configurations entries and previous warnings to see descriptions of which configuration failed.  End Warning  Info: 2006-08-16 18:40:03.20  ...  Process Exit Code 1.  The step failed.

 

Thanks in advance for any help!!!

View 2 Replies View Related

RS 2005: Stored Procedure With Parameter It Runs In The Data Tab But The Report Parameter Is Not Passed To It

Feb 19, 2007

Hello,
since a couple of days I'm fighting with RS 2005 and the Stored Procedure.

I have to display the result of a parameterized query and I created a SP that based in the parameter does something:

SET ANSI_NULLS ON
SET QUOTED_IDENTIFIER ON
CREATE PROCEDURE [schema].[spCreateReportTest]
@Name nvarchar(20)= ''

AS
BEGIN

declare @slqSelectQuery nvarchar(MAX);

SET NOCOUNT ON
set @slqSelectQuery = N'SELECT field1,field2,field3 from table'
if (@Name <> '')
begin
set @slqSelectQuery = @slqSelectQuery + ' where field2=''' + @Name + ''''
end
EXEC sp_executesql @slqSelectQuery
end

Inside my business Intelligence Project I created:
-the shared data source with the connection String
- a data set :
CommandType = Stored Procedure
Query String = schema.spCreateReportTest
When I run the Query by mean of the "!" icon, the parameter is Prompted and based on the value I provide the proper result set is displayed.

Now I move to "Layout" and my undertanding is that I have to create a report Paramater which values is passed to the SP's parameter...
So inside"Layout" tab, I added the parameter: Name
allow blank value is checked and is non-queried

the problem is that when I move to Preview -> I set the value into the parameter field automatically created but when I click on "View Report" nothing has been generated!!

What is wrong? What I forgot??

Thankx for any help!
Marina B.





View 3 Replies View Related

Gridview / SqlDataSource Error - Procedure Or Function &<stored Procedure Name&> Has Too Many Arguments Specified.

Jan 19, 2007

Can someone help me with this issue? I am trying to update a record using a sp. The db table has an identity column. I seem to have set up everything correctly for Gridview and SqlDataSource but have no clue where my additional, phanton arguments are being generated. If I specify a custom statement rather than the stored procedure  in the Data Source configuration wizard I have no problem. But if I use a stored procedure I keep getting the error "Procedure or function <sp name> has too many arguments specified." But thing is, I didn't specify too many parameters, I specified exactly the number of parameters there are. I read through some posts and saw that the gridview datakey fields are automatically passed as parameters, but when I eliminate the ID parameter from the sp, from the SqlDataSource parameters list, or from both (ID is the datakey field for the gridview) and pray that .net somehow knows which record to update -- I still get the error. I'd like a simple solution, please, as I'm really new to this. What is wrong with this picture? Thank you very much for any light you can shed on this.

View 9 Replies View Related

Error : 2827: Procedure In Procedure Buffer 0x7acad6c Is Not Properly Hashed

Mar 19, 1999

Error : 2827, Severity: 20, State: 1
Procedure <proc name> in procedure buffer 0x7acad6c is not properly hashed.
...??

any ideas?
thanks

View 4 Replies View Related

Help With TSQL Stored Procedure - Error-Exec Point-Procedure Code

Nov 6, 2007

I am building a stored procedure that changes based on the data that is available to the query. See below.
The query fails on line 24, I have the line highlighted like this.
Can anyone point out any problems with the sql?

------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------
This is the error...


Msg 8114, Level 16, State 5, Procedure sp_SearchCandidatesAdvanced, Line 24

Error converting data type varchar to numeric.

------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------
This is the exec point...


EXEC [dbo].[sp_SearchCandidatesAdvanced]

@LicenseType = 4,

@PositionType = 4,

@BeginAvailableDate = '10/10/2006',

@EndAvailableDate = '10/31/2007',

@EmployerLatitude = 29.346675,

@EmployerLongitude = -89.42251,

@Radius = 50

GO

------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------
This is the STORED PROCEDURE...


set ANSI_NULLS ON

set QUOTED_IDENTIFIER ON

go



ALTER PROCEDURE [dbo].[sp_SearchCandidatesAdvanced]

@LicenseType int = 0,

@PositionType int = 0,

@BeginAvailableDate DATETIME = NULL,

@EndAvailableDate DATETIME = NULL,

@EmployerLatitude DECIMAL(10, 6),

@EmployerLongitude DECIMAL(10, 6),

@Radius INT


AS


SET NOCOUNT ON


DECLARE @v_SQL NVARCHAR(2000)

DECLARE @v_RadiusMath NVARCHAR(1000)

DECLARE @earthRadius DECIMAL(10, 6)


SET @earthRadius = 3963.191


-- SET @EmployerLatitude = 29.346675

-- SET @EmployerLongitude = -89.42251

-- SET @radius = 50


SET @v_RadiusMath = 'ACOS((SIN(PI() * ' + @EmployerLatitude + ' / 180 ) * SIN(PI() * p.CurrentLatitude / 180)) + (COS(PI() * ' + @EmployerLatitude + ' / 180) * COS(PI() * p.CurrentLatitude / 180) * COS(PI()* p.CurrentLongitude / 180 - PI() * ' + @EmployerLongitude + ' / 180))) * ' + @earthRadius




SELECT @v_SQL = 'SELECT p.*, p.CurrentLatitude, p.CurrentLongitude, ' +

'Round(' + @v_RadiusMath + ', 0) AS Distance ' +

'FROM ProfileTable_1 p INNER JOIN CandidateSchedule c on p.UserId = c.UserId ' +

'WHERE ' + @v_RadiusMath + ' <= ' + @Radius


IF @LicenseType <> 0

BEGIN

SELECT @v_SQL = @v_SQL + ' AND LicenseTypeId = ' + @LicenseType

END


IF @PositionType <> 0

BEGIN

SELECT @v_SQL = @v_SQL + ' AND Position = ' + @PositionType

END


IF LEN(@BeginAvailableDate) > 0

BEGIN

SELECT @v_SQL = @v_SQL + ' AND Date BETWEEN ' + @BeginAvailableDate + ' AND ' + @EndAvailableDate

END


--SELECT @v_SQL = @v_SQL + 'ORDER BY CandidateSubscriptionEmployerId DESC, CandidateFavoritesEmployerId DESC, Distance'


PRINT(@v_SQL)

EXEC(@v_SQL)


-----------------------------------------------------------------------------------------------------------------

View 4 Replies View Related

ERROR:Syntax Error Converting Datetime From Character String. With Stored Procedure

Jul 12, 2007

Hi All,





i have migrated a DTS package wherein it consists of SQL task.

this has been migrated succesfully. but when i execute the package, i am getting the error with Excute SQL task which consists of Store Procedure excution.



But the SP can executed in the client server. can any body help in this regard.





Thanks in advance,

Anand

View 4 Replies View Related

Error Message: Error 0x800706BE While Loading Package File D:PackagesToradSales.dtsx. The Remote Procedure Call Failed.

Dec 20, 2006

Hello,

I have a bundling package that runs about 20 other packages. It has been working fine for a while but a couple of days ago it fail with the following message,

Error 0x800706BE while loading package file "D:PackagesToradSales.dtsx". The remote procedure call failed.

I´m running the SSIS packages in an 64-bit environment.

Thankful for help with this!

//Patrick

View 3 Replies View Related

Only One SSIS Job Runs...

Feb 12, 2007

Hi,

Currently I have two SSIS jobs on my machine. The problem I'm having is, only one of the jobs executes succesfully, the other one fails for incorrect user login. Both jobs use the same configuration database and all the packages on both jobs have the protection level set to "DontSaveSensitive". Both jobs have been deployed in the exact same manner, yet only one succeceeds and the other fails.

Can anybody tell me why this is going on?

View 2 Replies View Related

Vbs Script Runs As Standalone, But Not In Dts Or Sql Job

Jun 19, 2001

I have a vbs script to try to prove that I can perform vbs scripting in either a job step or a dts package
The script is

dim rs, sql,adoconn, adocommand, dataconnstring

set adoconn = createObject("ADODB.CONNECTION")
Set rs = CreateObject("ADODB.Recordset")
set adocommand = CreateObject("ADODB.Command")
adoconn.ConnectionString = "Provider=SQLOLEDB;Server=myserver;Database=pubs;U id=myuser;Pwd=mypass;"

adoconn.Open
sql = "select * from import"
rs.Open sql, adoconn,adOpenForwardOnly
while rs.EOF = false
sql = "insert into zz default values"
adocommand.ActiveConnection = adoconn
adocommand.CommandText = sql
adocommand.Execute

rs.MoveNext
wend

rs.Close
adoconn.Close
set adoconn = nothing


However,
when I run this from windows explorer it works fine,
but when I try to run it as an activeX script, I get the error ActiveX scripting: Function not found

As a cmdexec step in a job, I use the line c:inetpubwwwrootvbsvbstest1.vbs
It failed with the error
The process could not be created for step 1 of job 0x119BDBD264AD9B4597A9302786F0E250 (reason: %1 is not a valid Win32 application). The step failed.


What is wrong with the vbs script ?, or do I need to invoke it a different way ?

thanks in advance

View 1 Replies View Related

Can I Create A Job That Runs Other Jobs, Or.....

Aug 15, 2000

I have jobs (DTS packages) for several different tasks that I would like to run sequentially, rather than trying to estimate how long each will take and schedule them individually.

Any suggestions?

Thanks,
Cara

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved