I am currently working in the sql server 2000 environment and I want to
write a function to pull all dates within a given date range. I have
created several diferent ways to do this but I am unsatisfied with
them. Here is what I have so far:
declare @Sdate as datetime
declare @Edate as datetime
set @SDate = '07/01/2006'
set @EDate = '12/31/2006'
select dateadd(dd, count(*) - 1, @SDate)
from [atable] v
inner join [same table] v2 on v.id < v2.id
group by v.id
having count(*) < datediff(dd, @SDate, @EDate)+ 2
order by count(*)
this works just fine but it is dependent on the size of the table you
pull from, and is really more or less a hack job. Can anyone help me
with this?
I've been experiencing difficulty with pulling records using a where clause date range. I'm using this:
select * from dbo.ACCTING_TRANSACTION_hISTORY where ath_postype = 'NTC' or ath_postype='NTD' and
ath_postdate >= '2013-01-01 00:00:00' and ath_postdate <= '2013-01-05 23:59:59'
I've also tried variations of this without the time portion of the ath_postdate field (of type datetime) , but it still seems to be pulling records from 2009, etc.
Is there a way that I can get a resultset that contains unique dates ina given date range without the need to have a temporary table and acursor?perhaps something like:declare @start_date as datetimedeclare @end_date as datetimeset @start_date as '1/1/2005'set @end_date as '1/1/2006'select fn_getuniquedate(@start_date, @end_date)1/1/20051/2/20051/3/2005...12/31/2005
Basically, I have a membership table that lists each member with an effective period, Eff_Period, that indicates a month when a member was active. So, if a member is active from Jan to Mar, there will be three rows with Eff_Periods of 201501, 201502 and 201503.
All well and good.But, a member may not necessarily have continuous months for active membership. They might have only been active for Jan, Feb and Jun. That would still give them three rows, but with noncontinuous Eff_Periods; they'd be 201501, 201502 and 201506.There is also a table that logs member activity. It has an Activity_Date that holds the date of the activity - betcha didn't see that comin'. What I'm trying to do is determine if an activity took place during a period when the member was active.
My original thought was to count how many rows a member has in the Membership table and compare that number to the number of months between the MIN(Eff_Period) and the MAX(Eff_Period). If the numbers didn't matchup, then I knew that the member had a disconnect somewhere; he became inactive, then active again. But, then I thought of the scenario I detailed above and realized that the counts could match, but still have a discontinuity.So, is there a nifty little SQL shortcut that could determine if a target month is contained within a continuous or discontinuous list of months?
My scenario is: a person has many events, all based on a date. I need to aggregate the person to show min and max dates for a period, the period being defined as ending when there is not an event following the next date.
I am trying to use the custom code in the report but I don't think I am understanding how this is being used.
I have a function to get starting months for a report parameter. The function is below:-
-------------------------------------------------------------- Shared Function GetStartingMonths() as String dim strDefault as string dim CurrentMonth as String Dim SqlString as String
'strDefault = Month(Now) & "/1/" & Year(Now) CurrentMonth = "5/1/2002" Do While CDate(CurrentMonth) <= Now SqlString = SqlString + "Select " & CurrentMonth & " as value, " & MonthName(Month(CurrentMonth)) & " " & Year(CurrentMonth) & " as MonthYear" CurrentMonth = dateadd("m",1,CDate(CurrentMonth))
if Cdate(CurrentMonth) = Now then Exit Do else sqlString = SqlString & " Union " end if
Loop
return SqlString
End Function --------------------------------------------------------------- what i am trying to do here, and hopefully produce a sql string that would fill my dataset of dates and their representation.
In the dataset, I had put the following expression =Code.GetStartingMonths()
However, I can't seem to get the parameter to display the dates. shows up as disabled in my report.
Am I doing something wrong here or is there a better way to doing this ?
Additionally, I was wondering whether there is a better SQL code that would achieve the same thing I am doing ?
I have 2 tables, one is table A which stores Resources Assign to work for a certain period. The structure is as below
Name StartDate EndDate Tan 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000 Max 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000 Alan 2015-04-01 16:30:00.000 2015-04-02 00:30:00.000
The table B stores the item process time. The structure is as below
Item ProcessStartDate ProcessEndDate V 2015-04-01 09:30:10.000 2015-04-01 09:34:45.000 Q 2015-04-01 10:39:01.000 2015-04-01 10:41:11.000 W 2015-04-01 11:44:00.000 2015-04-01 11:46:25.000 A 2015-04-01 16:40:10.000 2015-04-01 16:42:45.000 B 2015-04-01 16:43:01.000 2015-04-01 16:45:11.000 C 2015-04-01 16:47:00.000 2015-04-01 16:49:25.000
I need to select the item which process in 2015-04-01 16:40:00 and 2015-04-01 17:30:00. Beside that I need to know how many resource is assigned to process the item in that period of time. I only has the start date is 2015-04-01 16:40:00 and end date is 2015-04-01 17:30:00. How I can select the data from both tables. There is no need for JOIN, just seperate selections.
Another item process time is in 2015-04-01 10:00:00 and 2015-04-04 11:50:59.
The result expected is
Table A
Name StartDate EndDate Alan 2015-04-01 16:30:00.000 2015-04-02 00:30:00.000
Table B
Item ProcessStartDate ProcessEndDate A 2015-04-01 16:30:10.000 2015-04-01 16:32:45.000 B 2015-04-01 16:33:01.000 2015-04-01 16:35:11.000 C 2015-04-01 16:37:00.000 2015-04-02 16:39:25.000
Scenario 2 expected result
Table A
Name StartDate EndDate Tan 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000 Max 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
I am trying to pull only those records with a maximum upload date for a file upload log.
This table keeps a list of files uploaded by supplierID and will have multiple records from the same supplier but with all different upload dates. Overall there are over 1,000 records for 48 uniqur suppliers.
The field names are: SupplierID, UploadDate, FeedFileName, RecordCount, FeedFileDate, RecordCount, and FeedLoaded.
So for each distinct SupplierID I'd like to grab the line item based on the max feedfiledate for each one - in other words I am trying to get the latest uploaded file information, how many records were in the file, and when it was uploaded... I've tried multiple group by and max clauses but there is something I am missing...
I am attempting to write a SQL query that retrieves info processed between two times (ie. 2:00 pm to 6:00 pm) during a date range (ie. 8/1/06 to 8/14/06)... I am new to SQL and am perplexed... I have referenced several texts, but have not found a solution. Even being pointed in the right direction would be greatly appreciated!!
I'm currently using the SQL to find records older than todays date in the SSD_SED field. I'm having to update the date manually each day. Is there a way I can automate this?
I'm trying to get a list of dates (actually, only the mondays) between a given range of two dates.Any help on the SQL statements I need to use, I'm having no luck.Thanks in advance.
I'm migrating data from access 2003 to sql server 2005. An access table contains dates like 5/1/0999. This is a date that is out of the datetime range from sql server.
Now my question is ... How do I replace these dates? I don't find something like IsDate in the expressions?
Code: SELECT P.ID, P.QTY, T_DATE FROM PARTS P INNER JOIN INVENTORY I ON P.ID = I.PART_ID WHERE P.QTY > 0 AND I.CODE = 'R' GROUP BY P.ID, P.QTY, I.T_DATE HAVING MAX(T_DATE) !> DATEADD(MONTH,-12,GETDATE())
[Code] ....
I am trying to make the sql only pull records where the highest date stored is older than a year ago.
So, based on today's date 12/21/2012:
if the highest (max) T_DATE is 3/12/2012 => don't pull that record if the highest (max) T_DATE is 11/30/2011 => pull that record into the recordset
the statement is off, it is pulling records that should not be included.
Hi all,Right now I have this SELECT statement:SELECT MUSIC_PK, MUSIC_TITLE, MUSIC_TITLE2, MUSIC_ORIGINAL_SINGER Now I want to add a second SELECT statement (same as above, but with an additional column) if the record was added within the 10 days (while still select other records, I just need to select an additional column). How would I do that? The additional column that I want to select is called MUSIC_NEW (so I can display if the record is new within 10 days.) I have a column in my table named DATE_ADDED, how do I go to calculate if it's within the 10 days since the day it was added to the current time?Thank you very much,Kenny.
I currently have a stored procedure that returns a list of dates based on a date range a user enters.
CREATE PROCEDURE sp_GetContactScheduleDates @MonthFrom int, @YearFrom int, @MonthTo int, @YearTo int, @DaysInMonth int AS Select distinct s.ScheduleMonth, s.ScheduleYear From OnCall_Schedules s Where CAST(cast(s.ScheduleMonth as nvarchar) + '/' + cast(s.ScheduleDate as nvarchar) + '/' + cast(s.ScheduleYear as nvarchar) as smalldatetime) >= CAST(cast(@MonthFrom as nvarchar) + '/' + cast('01' as nvarchar) + '/' + cast(@YearFrom as nvarchar) as smalldatetime) And CAST(cast(s.ScheduleMonth as nvarchar) + '/' + cast(s.ScheduleDate as nvarchar) + '/' + cast(s.ScheduleYear as nvarchar) as smalldatetime) <= CAST(cast(@MonthTo as nvarchar) + '/' + cast(@DaysInMonth as nvarchar) + '/' + cast(@YearTo as nvarchar) as smalldatetime) Order by s.ScheduleYear, s.ScheduleMonth GO
However, this only brings back those dates that are in the table. I need to get ALL dates within the range.
For example, the OnCall_Schedules table contains schedules that are saved by the user. If no one has ever saved a schedule at any time in May 2004 and the range of dates entered is January 2004 to June 2004, then May 2004 will not be returned. I need to get back all dates within that range regardless if it has something scheduled or not. How can this be done?
Note - I do not want to set up any dummy records or create a table with valid dates as the user will be allowed to choose any range of dates and we do not want to have to maintain anything.
Can some sort of function be used? What would the code look like?
For some reason this is just not "clicking" with me and the longer I stare at it the more I overcomplicate things and then I just confuse myself further...
Provided this relation showing where "pkey" and "skey" met on "ServiceDate":
I need to select out a list of distinct pkeys and skeys only when there was no meeting between the two in November 2005. In other words, this query would produce only one record - the starred record - when run against this sample table. This is because even though, for example, skey 124 / pkey 2 has an entry outside the desired range, it also has one inside the desired range. The same goes for the record outside our range for 123 and 2 - it also has a record inside our range.
At this point, I've come to the conclusion that I can first select all the distinct pkeys and skeys where the servicedate is not in 11/2005 then join it to a selection of distinct pkeys and skeys where the servicedate IS in the desired date range. Does that seem like the most straightforward way through this?
I don't get the impression that this is that complicated a problem, but it's one of those deals where I goofed up somewhere along the line, and now I think I'm really overthinking the problem, so I'd be much obliged if someone could give me a hearty slap to clear the ol' noggin.
Ok... Here is what I want to to: I have a number of tables, but this query concerns only two of them: Employee, Disposition, with a one to many relationship on the phone number.. Employee has personal info, and dispostion is a large table that keeps track of transactions. There is a unque_id for every transaction.
I want to pull some information. A date is assciated with each trans action on the disposition table. I want to be able to pull up all the unique employee phone numbers from a disposition table but only the latest date they made a transaction. My result should be only one phone nbr, one transaction number, and the date of the last transaction, per employee phne_nbr. But I can't seem to be able to pull this.
This query gets me the max date called per phne_nbr:
select 'Max'= max(dte_call), phne_nbr into TestTable from Disposition group by phne_nbr
The problem arises when I need to get the unique_id for that transaction, as I need it for other queries...The code below does not work...I get duplicate records and so forth.
select 'Max'= max(dte_call), phne_nbr, unique_id into TestTable from Disposition group by phne_nbr, unique_id
This shouldn't be that hard!! (((I tried a variation usin select distinct with the filed I wanted to be distinct in () otherfield, other field... but the distinct is not limited to the field in (), it gets the distinct record for the entire select ))) I must be missing something simple here. Can anyone help!!!
I'm using SQL Server 2000 sp2...I have created a view that gives me customer info from which I need to create a view and or table that gives me a 24 monthly columns of the sum of each account_number monthly revenues (going back 24 months from this month)..The columns I'm pulling from are these:
Here's what I have so far: ---------------------------- SELECT TOP 100 PERCENT Account_number, Customer_Name, SUM(Order_net_price) AS 'CM - 24' FROM dbo.Customer_Feed WHERE (First_insert_date >= DATEADD(mm, DATEDIFF(mm, 0, GETDATE()) - 24, 0)) AND (First_insert_date < DATEADD(mm, DATEDIFF(mm, 0, GETDATE()) - 23, 0)) GROUP BY Account_number, Customer_Name ORDER BY Account_number
I've basically hacked out a way to get the monthly totals for each account. What I would like to do is so be able to repeat the query but increment the date range 1 month until reaching the present or last FULL month and display these sums in individual columns named CM - n (where CM means current month and 'n' is the # of months back from current.how to make this query run over again the 23 other times I need it to and display those months sum totals in individual columns.
How to show the dates in between a range. Its hard for me to explain so I have ddl with the original results and then ddl of how I would like the desired outcome.
On the side I have a visit ID I need to show each day logged for each ID. Sometime the Start and End are a single day and sometimes they are a range. I need a row for each date.
My goal is to take the btb-date and store it in the same table I loaded the seperate nodes to. Currently I am loading the req-header, req-property-address, and req-borrowers.
This date will be static in that it will remain the same for every record. My goal is to read it in and store it along with each record. Hope someone can give me some help.
I'm trying to add random dates to date column in existing table, but these need to be week days (Mon-Fri).I'm a beginner in TSQL, worked with MS Access many years - in Access I used to do something a bit different:
DateAdd("d",(Int((5*Rnd([ID]))+1)),#31/08/2015#) Table had ID, I gave a date it would start from (31/08/2015) and then range of ID to apply new date: UPDATE table1 SET table1 .date = DateAdd("d",(Int((5*Rnd([ID]))+1)),#31/08/2015#) WHERE (((table1 .ID) Between 1 And 5456));
This was applying random dates in range of 31/08/2015 + 5 days, so I could give a starting date of Sunday to get random dates populated over given IDs from Monday to Friday.Now, how can I do it in TSQL?I have a table with ID and dates column. I would like to apply new random dates from some range, but making sure they will be week days.
My goal is to select values from the same date range for a month on month view to compare values month over month. I've tried using the date trunc function but I'm not sure what the best way to attack this is. My thoughts are I need to somehow select first day of every month + interval 'x days' (but I don't know the syntax).In other words, I want to see
Select Jan 1- 23rd feb 1-23rd march 1-23rd april 1-23rd ,value from table
I have a QA Deployment Date field that is being returned in a custom report I created. I also found a sample date range parameter:
What I want to accomplish:
I want to select a From and To Date and filter the report to only display the rows that have the QA Deployment Date within the selected range.
For example.. I want to select From Date (8/1/2105) and To Date (8/31/2015) and I only want to return only the results that have a QA Deployment date between that selected range.
Date parameter. I created a report that allows a drop down for a date range to be selected. However, whenever I preview the report, I get an error. I know my error stems from my date fields being in this format "201301" , and the "date/ time" in SSRS being mm/dd/yyyy on the drop down calendar in SSRS.
I know the direction I want to go in, but just a little confused on where would I use the convert or cast function. Would it be in the data parameter itself, or a part of the query before the @start date and @End date?
I would like to be able to search by a single date, @StartDate, or by a date range , between @StartDate and @EndDate. I am having a hard time with the logic on this for a report in SSRS.
I have to display the last temperature reading from an activity table for all the dates in a selected date range.So if I select the date range from 09/01/2012 to 09/30/2012, the results should look like this:
Date Temperature 09/01/2012 73.5 09/02/2012 75.2 09/03/2012 76.3 09/04/2012 73.3 09/05/2012 77.0 09/06/2012 74.5 and so on.
I am using this to get the dates listed: WITH CTE_DatesTable AS ( SELECT CAST('20120901' as date) AS [Date] UNION ALL SELECT DATEADD(dd, 1, [Date]) FROM CTE_DatesTable WHERE DATEADD(dd, 1, [Date]) <= '20120930' ) SELECT [Date] FROM CTE_DatesTable
How could I get the temperature if I did a sub-query here?
I have a report that I need to run on 2 different date ranges.
Both report's data is 2 days behind today's date. so... WHERE reportdate between dateadd('d',date(),-2) and dateadd('d',date(),-2) OR SOMETHING LIKE THAT, NO BIGGIE HERE
The 2nd report is a month to date report. This is the 1 I can't figure out. WHERE reportdate between (the first day of this month) and dateadd('d',date(),-2)
So that would look like WHERE reportdate between 1/1/2007 and 1/21/2007
My problem is, if today is the 1st day of the month... how can I get my critiera to NOT do this WHERE reportdaye between 2/1/2007 and 1/30/2007
Hi Group!I am struggling with a problem of giving a date range given the startdate.Here is my example, I would need to get all the accounts opened betweeneach month end and the first 5 days of the next month. For example, inthe table created below, I would need accounts opened between'5/31/2005' and '6/05/2005'. And my query is not working. Can anyonehelp me out? Thanks a lot!create table a(person_id int,account int,open_date smalldatetime)insert into a values(1,100001,'5/31/2005')insert into a values(1,200001,'5/31/2005')insert into a values(2,100002,'6/02/2005')insert into a values(3,100003,'6/02/2005')insert into a values(4,100004,'4/30/2004')insert into a values(4,200002,'4/30/2004')--my query--Select *[color=blue]>From a[/color]Where open_date between '5/31/2005' and ('5/31/2005'+5)
Have seen other questions here about modifying date pickers supplied by reports created in BIDS. The answer is usually NO. But this does not involve a format change, simply want to limit say to a specific year. Any ideas?
I have created range bar chart and I am not able to achieve the following tasks.
1. Change X-axis Label Format to Quarter:
I have x-axis with dates and y axis of project groups. I have changed x-axis interval type = month and interval=3.
Set the Maximum = Max(ProjectEndDate) and Minimum = Min(ProjectStartDate).
Now my chart showing 3 months x-axis interval dates in mm/dd/yyyy format. I want to change this interval date format to Quarter. The problem is LabelsFormat property is not recognize the "=Q or q or quarter" and also not accepting the expressions. How can I achieve this?
2. Placing series side by side when it is not overlapping
I want to place the same group series side by side only when the previous project end date is less than next project start date, otherwise place the next project to next row. How can I achieve this?
We received a Payment from a customer on '10/10/2007 10:30:00'. i am trying to calculate the commission we would receive from that payment. the commission rate can be edited. so i have to find what the commission rate was when that payment was received.
I have a CommisionAudit table that tracks changes in commission rate with the following values.
ID | Commission Change | UpdatedOn ---------------------------------------------- 1 | Change from 20->25 | 03/07/2007 09:00:00 ---------------------------------------------- 2 | Change from 25->35 | 10/09/2007 17:00:00 ---------------------------------------------- 3 | Change from 35->20 | 01/10/2007 16:00:00 ---------------------------------------------- 4 | Change from 20->26 | 11/10/2007 10:00:00 ----------------------------------------------
with this payment, as the commission rate had been changed on 01/10/2007 it would obviously be 20%(ID 3). But I need to write sql to cover all eventualities i.e. Before the first and after the last. any help would be most welcome.
