This might be an ignorant question, but I can't figure this out.
What is the purpose of the Error output data flow from the OLEDB Source? I am trying to understand an example of what kind of "error" would cause a row to go down this path, and I can't come up with one.
Does anyone have a good example of how this could be useful?
Hi all,
I got an error when i do an OLE db Source pointing to an sql 2000 database and executing a sql query inside the OLE Source. The ole source will point to an OLE DB destination which is an sql 2005 database.
But i got the below error:
Error at Data Flow Task [OLE DB Destination [245]]: the column firstname cannot be processed because more than one code page (936 and 1252) are specified for it.
Error at Data Flow Task [DTS.Pipeline]: "component "OLE DB destination" (245)" failed validation and returned validation status "VS_ISBROKEN".
Error at Data Flow Task [DTS.Pipeline]: One or more component failed validation.
Error at Data Flow TaSK: There were errors during task validation.
(Microsoft.DataTransformationServices.VsIntegration)
I am using execute sql task to run a stored procedure in oracle database which returns a resultset. This works. Now I need to send the ouput to a destination table in a sql database. Should I use for each loop to pick the resultset and insert it into the destination one by one (which I dont think is a great idea) or is there a better way to accomplish this task (in data flow task) ?
When I use dataflow task instead of execute sql task, the main issue is I am not able to see the output columns when I execute an oracle stored procedure, but when I see the preview I can see the resultset . But I can see the output columns for a sql server stored procedure.
I have a data flow and inside the data flow , i have a ole db source and ole db command task to execute an insert transaction ( SP).. i would like to save the error output if the insert didn;t happend into a error log table..
but when I darg an error output line ( red) to another ole db command to insert an error log , i can only see two columns( error code and error column) are available in OLEDB command advance editor related to errors.. this doesn;t tell you much information about the error.how can i grap the error reson(desc) as the error output and store into a erro log table? so that i can see what the problem is?
Hi,
I have my datasource in Oracle9i and destination is Sql2005. I am connecting to Oracle 9i through OLEDb provider and when I connect to my DataSource using OLE DB Data Source, I get the following error:
Warning at "guid code": Cannot retreive the column code page info from the oledb provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale Id will be used.
Could anyone please help me trouble shoot this problem.
Regards,
Sudhakara.T.P.
sudhakaratp@hotmail.com
I am trying to execute a SP like below in OLEDB source in data flow... and this statement include the insert stament ( row by row transaction).. I would like to creat an error hadling logic so that if the trasaction fail to insert the row then ignore that particular row then, move to the next row without stopping the whole process.. how can i do this?
exec usp_Inert_Registration_Episodes_Assessments
@Unique_ID=?,
@Gender_Cd=?,
@Birth_Date=?,
@Race_Ind=?,
@Ethnicity_Cd=?,
@Registration_Dt=? ,
--
--@Object_Key
Hi
I am using Oledb Provider for Db2 from IBM. (There is another one from microsoft)
Through this provider I am constructing a oledb connection manager.
This connection manager I am Using in Oledb Source adapter.
Now when I set Data Access mode as Table or view I Am able to preview the data.
But when I use Data Access Mode as SQL Command try to preview I get this Error
TITLE: Microsoft Visual Studio
------------------------------
Error at s_NEWMAPPING10 [EMP [1]]: An OLE DB error has occurred. Error code: 0x80040E21.
------------------------------
ADDITIONAL INFORMATION:
Exception from HRESULT: 0xC0202009 (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
BUTTONS:
OK
------------------------------
I am not able to figure out how to resolve this.
hello sirspurpose OUTPUT keyword with examples
View 3 Replies View RelatedAssume I built a stored proc (dbo.testproc) that will return the OUTPUT parameter @RandomInteger.
I could pass a specific value for the parameter...
EXEC dbo.testproc 7
Or I could return a value from the proc...
DECLARE @ReturnInteger
EXEC dbo.testproc @RandomInteger = @ReturnInteger OUTPUT
SELECT @ReturnInteger
But I want to do both which, if this actually worked, might look like this...
DECLARE @RandomInteger
SET @RandomInteger = 7
EXEC dbo.testproc @RandomInteger = @ReturnInteger OUTPUT
SELECT @ReturnInteger
I want to pass a specific value and return the result from the proc. Do I need to use two parameters for this?
i have a weird situation here, i tried to load a unicode file with a flat file source component, one of file lines has data like any other line but also contains the character "ÿ" which i can't see or find it and replace it with empty string, the source component parses the line correctly but if there is a data type error in this line, the error output for that line gives me this character "ÿ" instead of the original line.
simply, the error output of flat file source component fail to get the original line when the line contains hidden "ÿ".
i hope you can help me with issue.
Thanks in advance.
What is the purpose of the error output for an OLE DB Source component. Any sql that would cause an error such as converting a character to a number or division by zero causes the OLE DB Source component to fail regardless of the settings for the error output. Works perfect for OLE DB Destination but I cannot come up with any scenario where it would work for the OLE DB Source component.
Thanks in advance,
Brad
In the Input and Output Properties tab under Advance Editor for OLE DB Source, I cannot remove columns. I copied this Source from a standard template and have made the normal changes to make it work. However I keep getting this error...Error: 0xC020837B at Load Server Security, OLE DB Source [1]: The output column "DBName" (1632) on the error output has no corresponding output column on the non-error output.Error: 0xC004706B at Load Server Security, DTS.Pipeline: "component "OLE DB Source" (1)" failed validation and returned validation status "VS_ISBROKEN".DBName of course is one of the columns that no longer exist, but I can't remove. Whenever I try to remove one of the columns, I get this error...Error at Load Server Security [OLE DB Source[1]]: The column cannot be deleted. The component does not allow columns to be deleted from this input or output. Is there anything that I can do to remove the columns? Is there just a simple setting that I can change to make this work?
View 6 Replies View RelatedFor the Custome source Component ErrorOutput, should I go for asynchronous / synchronous Output.
If i go for synchronous output
// Create the error output.
IDTSOutput90 errorOutput = ComponentMetaData.OutputCollection.New();
errorOutput.IsErrorOut = true;
errorOutput.Name = "ErrorOutput";
errorOutput.SynchronousInputID = What Id is required here;
errorOutput.ExclusionGroup = 1;
Is it the IDTSOutput90 InPut.ID / OutPut.ID which should be assigned.
Thanks Regards
Anil
I've read about the XML Source sometimes setting error output columns to DT_WSTR(255), but mine is now setting them to DT_NTEXT.
Anyone have any suggestions short of an XML editor? I'm concerned that I might do something to "refresh" the columns and cause the problem again.
This seems like a simple task that just doesn't work. I have an XML source, and on that source, I have the Error Output configured such that the Trunctations are set to "Ignore failure", and the Errors are all set to "Redirect Row". They are then being redirected to a Row Count transformation.
To set up a test for this, I have an integer type (DT_I4 specifically) that I am populating with an alpha-numeric value. For example:
<BatchID>118a</BatchID>
However, this column prevents my XML source from loading at all, and throws the following error:
The component "XML_SRC - File" (46) failed attempting to write data to output column "BatchID" (2030) on output "Payment Error Output" (115). Input string was not in a correct format.
I checked BatchID (2030) throught the advanced properties of the XML Source, and this is defined as a Unicode text stream [DT_NTEXT] field, so I don't see why there would be a problem.
Is this a bug, or am I overlooking something?
Thanks in advance for your help.
Jerad
Hi all,
I saw a couple of other posts here on this topic, but none quite got to my issue.
I'm trying to add error output to a custom source component (not a script, a custom component). The samples all seem to deal with transform components, and my issues seem to be unique to source components.
I have the following code related to error handling ...
Public Overloads Overrides Sub ProvideComponentProperties()
...
Dim output As IDTSOutput90 = ComponentMetaData.OutputCollection.New
output.Name = OUTPUTCOLUMNNAME
output.ExternalMetadataColumnCollection.IsUsed = True
ComponentMetaData.UsesDispositions = True
output.ErrorRowDisposition = DTSRowDisposition.RD_NotUsed
output.ErrorOrTruncationOperation = "Something got truncated or blew up"
Dim errorOutput As IDTSOutput90 = ComponentMetaData.OutputCollection.New
errorOutput.Name = ERRORCOLUMNNAME
errorOutput.IsErrorOut = True
...
End Sub
Public Overloads Overrides Sub ReinitializeMetaData()
Dim output As IDTSOutput90 = ComponentMetaData.OutputCollection(OUTPUTCOLUMNNAME)
Dim outColumn As IDTSOutputColumn90 = output.OutputColumnCollection.New
outColumn.Name = strName
outColumn.SetDataTypeProperties(DataType.DT_I4, 0, 0, 0, 0)
Dim metadataColumn As IDTSExternalMetadataColumn90 = output.ExternalMetadataColumnCollection.New
metadataColumn.Name = outColumn.Name
metadataColumn.DataType = outColumn.DataType
metadataColumn.Precision = outColumn.Precision
metadataColumn.Length = outColumn.Length
metadataColumn.Scale = outColumn.Scale
metadataColumn.CodePage = outColumn.CodePage
outColumn.ExternalMetadataColumnID = metadataColumn.ID
outColumn.ErrorRowDisposition = DTSRowDisposition.RD_NotUsed
outColumn.ErrorOrTruncationOperation = "Something Truncated!"
outColumn.TruncationRowDisposition = DTSRowDisposition.RD_NotUsed
Dim errorOutput As IDTSOutput90 = ComponentMetaData.OutputCollection(ERRORCOLUMNNAME)
Dim errorColumn As IDTSOutputColumn90 = errorOutput.OutputColumnCollection.New
errorColumn.Name = outColumn.Name
errorColumn.SetDataTypeProperties(DataType.DT_I4, 0, 0, 0, 0)
...
End Sub
The confusions I have are:
a) the stock advanced properties editor (I haven't provided a custom one) doesn't seem to "realize" that I have an error output, so provides no method to configure. I am believing it would need to know which Output columns can have their error/truncation redirected. I'd have thought setting ErrorRowDisposition on my output column would have been enough to trigger this ??
b) since I don't have any means of configuring, not surprisingly, when I try to connect my error output, designer complains that, "Ths error output cannot receive any error rows. This occurs for several reasons: Input columns or output columns are not yet defined. Error handling is not supported by the component. Error handling is not configured for the component."
c) UsesDispoistions would seem to be appropriate only for a transform component
Thanks for reading, and appreciate any help or pointers.
Bill
I have a data source that I access via odbc in a DataReader Source component in SSIS. I can access the data fine. However, I am having problems with certain fields that are numeric (specifically home prices ranging from 100,000.00 to 99,999,999.00). In the advanced editor for my data reader source under the input and output properties tab, in data reader output under the external columns and output columns, these fields for some reason default to numeric data types with a precision of 4 and a scale of zero, not large enough to hold the data that is coming in. This causes errors that make the data come in as null (after i specify to ignore the errors).
I can change the precision and scale to 18 and 4 in the external columns, but when I try to change the datatype, precision or scale in the output columns I get the following message:
Property Value is not valid.
The details are:
Error at Import DataReader Source: The data type of output columns on the component "DataReader Source" cannot be changed.
Error at DataReader Source: System.Runtime.InteropServices.COMException (0xC020837D)
at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.SetOutputColumnDataTypeProperties(Int32 iOutputID, Int32 iOutputColumnID, DataType eDataType, Int32 iLength, Int32 iPrecision, Int32 iScale, Int32 iCodePage)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostSetOutputColumnDataTypeProperties(IDTSManagedComponentWrapper90 wrapper, Int32 iOutputID, Int32 iOutputColumnID, DataType eDataType, Int32 iLength, Int32 iPrecision, Int32 iScale, Int32 iCodePage)
Any help is greatly appreciated.
Dave
Hi,
I have two tables,
Table A on Server 1 (3 ROWS)
ID Name Address
ID1 A B
ID2 X Y
ID3 M N
There is another table on a different server which looks like
Table B on Server 2
PKColumn ID Details
1 ID1 Desc1
2 ID1 Desc2
3 ID1 Desc 3
4 ID2 Desc
5 ID2 Description
As you can see the ID is the common column for these two tables,
I want to get the Query the above 2 tables and the output should be dumped into a new table on Server2.
I am using the following SSIS Package
OledbDataSource-------> OledbCommand(Select * from TableB where ID =?)
From here, how can insert the rows returned from the oledb command into another table.
Since, for each row of TableA it will return some output rows...How can I insert all these into the New Table.
Please help on configuring the output of the oledb command.
Thanks,
I was having one package which uses a source query in OLEDB Source Control and fetches the record and a couple of lookups and then an oledb command to insert/update the records in the table using as SP. I changed the source query(Infact the package) and removed in lookup and a different SP was called similar to the old one. But my problem is the package which was before taking only minutes to update 50,000 records is now taking more than 2 hrs. The problem is the number of records it is fetching from the source each time is very less.. its fetching hardly 500 records a time compared to nearly 2500 records before. Where am i going wrong? Any suggestion greatly appreciated.
View 5 Replies View RelatedHi,
I am running an MDX query in SSIS but I don't know what is the best way of doing this, performance wise.
I know I can run the MDX query through an openquery in the OLEDB, and also run it through a Datareader, no openquery needed.
I know the datareader is slower in a normal basis due to .Net, but in this case the OLEDB is running an open query to a linked server which won't be fast like running a regular SQL.
If anyone knows which of this two run faster in this scenario I'll appretiate if you let me know.
Hi,
Firtsly - I am new to SSIS if my approach could be improved then I welcome suggestions.
Scenario: I have a large SSIS package that consolidates / summarizes work week information from several data sources. Currently each data flow task in the control flow calculates the from and to date that is filtered on, for example:
DECLARE @FromDT AS DATETIME
SET @FromDT = CAST(FLOOR( CAST( DATEADD(D, -7, GETDATE()) AS FLOAT ) ) AS DATETIME)
DECLARE @ToDT AS DATETIME
SET @ToDT = CAST(FLOOR( CAST( GETDATE() AS FLOAT ) ) AS DATETIME)
I would like to remove these statements that appear in most steps and replace them with a global variable that is used throughout the package. This statement would only appear once & it would make the package much easier to run after failure etc.
Problem: I am using Data Reader Source with the 'SQLCommand' property specified. It looks like parameters are only supported if an OleDB connection is used?
So I switched to an OleDB connection and no parameters are recognised in the string - a forum search reveals that parameters in sub queries are not always found properly. The solution to this problem appears to be, to set 'Bypass Prepare' to True but this is a property for the Execute SQL task, not the Data Flow Task source.
Questions:
Does the Data Reader Source control from Data Flow Source toolbox section support parameters?
Can anyone suggest a fix to the OleDB Source issue with Parameters?
Is there a better way to solve my problem e.g. Using Execute SQL Task instead of Data Flow tasks etc
Example SQL:
This SQL is an example of the SQL for the OleDB Data Source (within a Data Flow task)
------------------------------
--RADIUS LOGINS
------------------------------
DECLARE @FromDT AS DATETIME
SET @FromDT = CAST(FLOOR( CAST( DATEADD(D, -7, GETDATE()) AS FLOAT ) ) AS DATETIME)
DECLARE @ToDT AS DATETIME
SET @ToDT = CAST(FLOOR( CAST( GETDATE() AS FLOAT ) ) AS DATETIME)
DECLARE @Attempts AS BIGINT
SET @Attempts =
(SELECT COUNT(*)
FROM dbo.Radius_Login_Records
WHERE LoggedAt BETWEEN @FromDT AND @ToDT)
DECLARE @Failures AS BIGINT
SET @Failures =
(SELECT COUNT(*)
FROM dbo.Radius_Login_Records
WHERE LoggedAt BETWEEN @FromDT AND @ToDT
AND Authen_Failure_Code IS NOT NULL)
DECLARE @Successes AS BIGINT
SET @Successes = @Attempts - @Failures
DECLARE @OcaV1Hits AS BIGINT
SET @OcaV1Hits = (SELECT COUNT(DISTINCT LoginName)
FROM dbo.Radius_Login_Records
WHERE LoggedAt BETWEEN
@FromDT AND @ToDT
AND EAPTypeID = 25)
DECLARE @OcaV2Hits AS BIGINT
SET @OcaV2Hits = (SELECT COUNT(DISTINCT LoginName) AS OcaV2Hits
FROM dbo.Radius_Login_Records
WHERE LoggedAt BETWEEN
@FromDT AND @ToDT
AND EAPTypeID = 13)
SELECT
@Attempts AS ConnectionAttempts,
@Failures AS ConnectionFailures,
(CAST(@Successes AS DECIMAL(38,2)) / CAST(@Attempts AS FLOAT) * 100) AS SuccessRate,
@OcaV1Hits AS OcaV1Hits,
@OcaV2Hits AS OcaV2Hits
Please remember, I'm new to SSIS - so be detailed in your response. Thanks for your help!
Iam migrating data from one database to another .I want give input of that source and traget database names through globally declared user variables (@sourcename,@targetname)
How i can map the variables in OLE DB Source ..i dint find any option to that .
Can somebody help ?
Thanks
Kumar
is it true that I will not be able to use the returned value from an sp that is called on every row from an oledb command transformation? I see all kinds of complaints on the web but cant determine if this would be a waste of time. I'd like to append the returned value (which is calculated and cannot be joined in the buffer) to the data on its way out of the transformation.
View 3 Replies View RelatedI am putting the below query in a OLEDB SOURCE through a variable (it is a select statement with a where clause from one date to another).
"select TestRecordtype, request_id from department
where LOAD_TMSTP between
(select max(END_TMSTP) LOG) and
(TO_DATE("+RIGHT("0" + (DT_STR,4,1252)DATEPART( "dd" , @[System:tartTime] ), 2) + "-"
+RIGHT("0" + (DT_STR,4,1252)DATEPART( "mm" , @[System:tartTime] ), 2) + "-"
+RIGHT("0" + (DT_STR,4,1252)DATEPART( "yy" , @[System:tartTime] ), 2) + " "
+RIGHT("0" + (DT_STR,4,1252)DATEPART( "hh" , @[System:tartTime] ), 2) + "."
+RIGHT("0" + (DT_STR,4,1252)DATEPART( "mi" , @[System:tartTime] ), 2) + "."
+RIGHT("0" + (DT_STR,4,1252)DATEPART( "ss" , @[System:tartTime] ), 2) +",'DD-MM-YY HH24.MI.SS')) "
I am debugging a Data Flow task in my SSIS package. When I run the package in debug mode, one of the OLEDB Data Sources turns red. I have rerouted all Error Output to a flat file, and put a Data Viewer on that path: no rows get sent. When I click the Preview button on this component in Design mode, I see the expected data and get no error messages. The connection does a simple table access...no SQL command. I don't see anything different between this component and other OLEDB sources in the same package that don't trigger any errors. I've tried dropping and re-creating the component with the same results.
What else can I do to debug this?
Guys,
I am having a nightmarish time getting an Oracle Connection Manager working as a source in my SSIS package.
The CM is called "OLTP_SOURCE". When I inspect the configuration and test connection, it succeeds, however when I go to run the package (both in debug mode and via DTEXECUI) I get the following error:
The AcquireConnection method call to the connection manager "OLTP_SOURCE" failed with error code 0xC0202009
After this happens, if I go into an OLE DB Source within a DFT, I get the following:
No disconnected record set is available for the specified SQL statement.
Now, if I go back into the CM, enter the password and test, it succeeds. From this point, I will go to preview the data in the OLE DB Source, and it comes back fine. However, when I go to run the package, I get the same error time and time again:
The AcquireConnection method call to the connection manager "OLTP_SOURCE" failed with error code 0xC0202009
The quick reader will suggest that the password is not being persisted. To this end, I have tried each of the following techniques to no avail:
1. Double, Triple and Quadruple check that the "save" password option in the CM is checked.
2. Hardcode the connection string in the dtsx XML-behind.
3. Enable Package Configurations and hardcode the connection string in the dstsconfig file.
4. Run the dtsx file using DTEXECUI, providing it with the configuration (that includes the hard-coded password).
5. Run the dtsx file using DTEXECUI, providing it the connection string in the Connection Managager override UI.
Can anyone help shed some light on what might be going on? So far, it is obvious that there has to be something that I am doing wrong because (syntax dialect differences aside) I can't imagine that Oracle sources should be this much of a headache.
Thanks,
Rick
A little background first. I have a header table and a detail table in my staging area/ods. I need to join them together to flatten them out for load. The Detail Table is pretty deep - approx 100 million rows.
If I use the setting (table or view) and set the table name (say, the detail table), the package starts up nicely. But if I switch the OLE DB Source to using a SQL Statement and then join the tables in the SQL, then the Pre-Execute phase of the package takes a VERY long time. I have waited as long as 30 minutes for this phase to complete, but it never finished.
Another twist...If I take the join select statement out of the OLEDB Source and put it in a view on the server, then swith the OLE DB Source to look at the view using the (table or view) mode, then the package gets through the Pre-Execute phase just fine.
Can someone go into detail as to what the Pre-Execute phase does and why a deep table might make it take a long time? I know already that the pre-execute phase caches the lookups, but not much else.
Any help?
Mark
http://spaces.msn.com/mgarnerbi
Hi,
at first...
Yes, I have seen this post http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=366077&SiteID=1 and yes, my Stored Procedure contains a "Set nocount on"...
:-)
My Stored Procedure contains variable SQL-Code to check a table (given by parameter) against some masterdata tables and I would like to write the result of the check to a flatfile to be able to send it via mail.
but evoking the Stored procedure brings up no meta data for the Flatfile Destination - the preview works...
any other hints?
except for doing the ckeck completely in SSIS?
:-P
cheers
Markus
Hello All,
I understand that the parser is having issues parsing my second command but I was wonder if anyone had stumbled on a work around for this:
-- OLEDB Source has no problem with this:
SELECT *
FROM some_table
where
last_update_dt = ?
-- OLEDB Source errors on this:
SELECT *
FROM some_table
where
Convert( char(12), last_update_dt, 112 ) = Convert( char(12), Cast( ? as DateTime), 112 )
The first SQL statement won't return the desired rows because of the wonderful time stamp, the second works well but the provider won't parse it. I have used the "SQL command from variable" to work around this but we have some tables with 200+ columns, so the only way to use the "SQL command from variable" is to do a select *, which I'm trying to avoid, for both performance reasons and company standards.
Any thoughts?
Thanks,
Raymond
i need to select data by using a very complex sql statement. when i use a ole db source componente and choose SQL command as data access mode the process never ends. but when i put the sql statement in an sql task component it works fine and fast. isn't an oledb source always based on an sql statement (select *)? so how is it possible that this component becomes so slow?
View 11 Replies View RelatedHi All,
Is it possible that an OLEDB Data Flow Source is imposing locks on the source tables? The source is an SQL Server OLTP environment, and although the package will be scheduled to run nightly when the application sees little to no use, I want to be sure that the process isn't impacting any application functions.
Thanks for the advice!
Rocco
I am trying to call a stored procedure as part of my OLEDBSource. It takes two parameters. @StartDate datetime and @EndDate datetime.
View 9 Replies View RelatedHi,
I have created lastUpdatedDate variable on package level. I have run a sql task and store a date in that variable.
now i am trying to pass that variable as parameter to oledb source connection (using command). it seems that we cant pass parameter in any sub query or derived table in query. its only working in outer query as soon as we place ? in WHERE clause of inner query it start throwing an 'Syntax Error' error saying that connection provider might not support that.
any idea ?????
I dont want to use command variables as my query is going to be quite big.
Note : I have tried Sql Server Native and OLEDB provider for sql server and this behaviour is seems to be constant in both.
Thanks,
Furrukh baig