Query Data From The Linked Foxpro Database
Aug 2, 2007
hello,guys,
my question is :
how do I query data from the linked foxpro database?
more:
I have linked a visual foxpro server to my sql server database by using the addserver clause.
Two server is in a local network.
My linked foxpro server named 'fox'.
its datasourse is not a dbc file, but a directory of dbf files ,and its full path is d:foxpro object.
In the directory ,there are three table,'show2003.dbf','sysu.dbf','szszj.dbf'.
And the .dbf files are not in any database.
They are just three files in the same directory.
There is no dbc file.
Now I can see the table list on the right page of the linked server.
But there is something wrong with my sql clause.
sample:
select * from fox..sysu
then the message is:
server: message 7313，level 16，status 1，row 1
the appointed constructure or directory to the provider is inefficacious 'MSDASQL'
I know I may use 'openquery',or 'openrowset'.
The problem is that variable is not valid in 'openquery' and 'openrowset'.
But I must use variable.
so ,please give me some advice.
Thank you very much
View 4 Replies
ADVERTISEMENT
Feb 24, 2014
Insert data to database foxpro using open query. I already create connection like below
@server = 'EXIMBIL_LINK',
@provider = 'MSDASQL',
@srvproduct = '',
@provstr = 'Driver={Microsoft Visual FoxPro Driver}; UID=;SourceDB=D: raining_testdata;SourceType=DBF ;Exclusive=No;BackgroundFetch=Yes'
when i try to show table van with command :
select * from openquery(EXIMBIL_LINK,'select * from van')
It show query running well but when i try to insert new row to table van with command :
INSERT into OpenQuery(EXIMBIL_LINK, 'SELECT c_user_id,c_user_name,full_name from van')
VALUES('1000007668','IDMTEST2','IDMTEST2')
throws error like this : Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done
View 1 Replies
View Related
Nov 22, 2004
I'm having problem with an OpenQuery statement in stored procedure, which should be run on FoxPro linked server. I'm getting either an error messages or not the result I expected. I know that the problem is with WHERE part, without this part it works.
Here is the code:
-------------------------------------
DECLARE @LastDate datetime
SELECT @LastDate = MAX(DateChaged)
FROM tblPersonel
WHERE ACTIVE IN( 'A', 'T')
1. I tried:
SELECT * FROM OPENQUERY(FoxProLink, 'SELECT ACTIVE, EmpNumber FROM tblPersonel WHERE DateChanged >=''+@LastDate+''')
This line gives me an error msg:
Could not execute query against OLE DB provider 'MSDASQL'.
[OLE/DB provider returned message: [Microsoft][ODBC Visual FoxPro Driver]Operator/operand type mismatch.]
2. I tried to use CTOD() - FOXPRO function to convert character to date.
SELECT * FROM OPENQUERY(FoxProLink, 'SELECT ACTIVE, EmpNumber FROM tblPersonel WHERE DateChanged >=CTOD(''+@LastDate+'')')
-this doesn't give any error, but doesn't limit the result set as it should.
Thanks all.
View 2 Replies
View Related
Oct 24, 2007
After installing sql2005 sp2 a simple select query to a linked server reports the following error message:
Msg 0, Level 11, State 0, Line 0A severe error occurred on the current command. The results, if any, should be discarded.Msg 0, Level 20, State 0, Line 0A severe error occurred on the current command. The results, if any, should be discarded.
Before installing SP2 we used sql2005 without any service packs, the linked server worked fine.
The linked server is a Visual FoxPro database.
After uninstalling and installing the 'Microsoft OLE DB Provider for Visual FoxPro 9.0' the issue stil remains.
View 3 Replies
View Related
Jun 11, 1999
i have a old database in foxpro and it has to be converted to sql server 6.5 database . the table in the foxpro has been broken into more than 1 tables in the sql server . so how can i transfer the data from 1 foxpro table to different tables in sql server 6.5.
vineet
View 1 Replies
View Related
Nov 28, 2006
Hi all,
This is my very first post to this forum. How to use the INSERT INTO... SELECT FROM query to export MS SQL 2000 data into FoxPro 2.6 DBF file? I want to write a VB 6.0 program, and already connected to MS SQL 2000 Database by MS SQL ODBC connection. Now I want to Export this MS SQL data to FoxPro 2.6 DBF. I found ROWSET option, but don't know how to use it for FoxPro.
Please help me.
Thanks in Advance.
Regards,
Rajeev Vandakar
View 5 Replies
View Related
Nov 5, 2004
Hello,
I want to know if there is an way to SET an index when send a query using the OpenQuery function to a FoxPro database using a linked server in the MS-SQL that points to a System DSN with the MS ODBC Driver to FoxPro.
Thank you in advance,
Aldair.
View 5 Replies
View Related
Feb 19, 2008
Hi all, I'm having issues with a FoxPro linked server.
I've set up a linked server to a FoxPro dbc using the Microsoft OLE DB Provider for Visual FoxPro. When I'm on Management Studio on my server the link appears to be working fine and a stored procedure I've created to get the indo from the dbc and put it into a temp table works fine.
However, when I try to execute the sp on management studio on my local machine I get the following error:
OLE DB provider "VFPOLEDB" for linked server "tern" returned message "Invalid path or file name.".
Msg 7303, Level 16, State 1, Procedure usp_SSRS_007, Line 28
Cannot initialize the data source object of OLE DB provider "VFPOLEDB" for linked server "tern".
And I also get a similar error when I try to test the connection of the linked server on my local machince.
This is now driving me nuts , so many many thanks in advance for any help!!!
View 4 Replies
View Related
Jun 19, 2007
I am trying to add a FoxPro linked server to MS SQL 2005, and I can't seam to create a linked server that works. What am I doing wrong in linking the server?
I have an ODBC connection that worked but not OLEDB; how can I do this with OLEDB (either VFPOLEDB or Jet, if it will work) and not ODBC.
This is what I thought was right
Code Snippet
sp_addlinkedserver 'test',
'FoxPro',
'VFPOLEDB',
'C:DataSomeDatabase.dbc',
NULL,
NULL,
NULL
But it gives the error:
Cannot create an instance of OLE DB provider "VFPOLEDB" for linked server "test".
Also I know in MS SQL 2000 once you linked a server you could view it in EM, but when I linked the VFP via ODBC I could query agianst it, but I could not open it in Mangament Studio.
Thank you in advance.
View 11 Replies
View Related
Feb 20, 2005
I've downloaded and installed the latest VFPOLEDB (12/04) on 2 separate SQL Server boxes.
In both cases, If I connect to SQL Server with Query Analyzer as (local) while on a box, the linked server to my foxpro database works fine with openquery().
However, If I'm at one box and attached to SQL Server on the other box, the openquery() fails.
Here's some particulars:
---
EXEC sp_addlinkedserver
@server='VFP',
@provider='VFPOLEDB',
@datasrc='\hdmcpdctis1 isrnddata',
@srvproduct='Visual FoxPro'
--this works on either (local) box
SELECT *
FROM OPENQUERY(VFP, 'select * from tislists')
Go
--but, the same openquery() above doesn't work if the box I'm running it from is attached to the SQL Server on the other box. I get:
Server: Msg 7302, Level 16, State 1, Line 1
Could not create an instance of OLE DB provider 'VFPOLEDB'.
OLE DB error trace [Non-interface error: CoCreate of DSO for VFPOLEDB returned 0x80040154].
=====================
One other approach I tried that works while on the (local) box, but fails when attached to the SQL Server on the other box:
select * from openrowset('MSDASQL',
'Driver=Microsoft Visual FoxPro Driver;SourceType=DBF;SourceDB= \hdmcpdctis1 isrnddata ',
'select * from [tislists.DBF]')
With error:
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'MSDASQL' reported an error.
[OLE/DB provider returned message: [Microsoft][ODBC Driver Manager] Driver does not support this function]
OLE DB error trace [OLE/DB Provider 'MSDASQL' IDBInitialize::Initialize returned 0x80004005: ].
===========================
Any Help is greatly appreciated! Thanks,
peter :confused:
View 5 Replies
View Related
Jul 13, 2015
I'm running SQL Server 2008 (x64) version.
How can i create a linked server for Microsoft Visual Foxpro databases ?
I'm using Microsoft.ACE.OLEDB.12.0 driver.
I success create a linked server, and can browse all tables from linked server connections, but why when query data using
SELECT * FROM OPENQUERY(PIP_TEST,'select * from tbctrl')
It getting error message
Cannot process the object "select * from tbctrl". The OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "pip_test" indicates that either the object has no columns or the current user does not have permissions on that object.
View 6 Replies
View Related
Sep 14, 2006
I€™ve been working on getting a linked server through SQL 2005 to work with VFP 9.
I get access denied for any and all security set ups on the linked server. I€™ve checked the folder-level security settings and see that the user I€™m logged in as, and have tried through security settings, and they seem to have access.
What other security settings should I be checking?
View 5 Replies
View Related
Mar 8, 2005
I'm posting this because I found this solution after much digging.
The goal here is to incorporate a variable parameter within a OPENQUERY and, ultimately build a dynamic Where clause for use within a OPENQUERY linked server routine. I'm posting because I spent a lot of time trying to get this to work and also, have seen other posts here that hinted it wasn't doable.
First of all - there a good quick article that gets close for FoxPro and possibly works as is for ACCESS:
http://support.microsoft.com/default.aspx?scid=kb;en-us;314520
Here's code for a solution:
DECLARE @OPENQUERY nvarchar(4000),
@TSQL nvarchar(4000),
@FAMILY CHAR(10)
SET @FAMILY='Touring'
SET @OPENQUERY = 'SELECT * FROM OPENQUERY(VFP,'''
SET @TSQL = 'select cov,family,model from vinmast where family='+'['+@FAMILY+']'')'
EXEC (@OPENQUERY+@TSQL)
All shown are single quotes.
In Visual Foxpro, ' ' or " " or [ ] can be used a delimeters
In addition, if wanting to build a dynamic where clause, you could do something like:
SET @TSQL = 'select cov,family,model from vinmast '
IF <some condition met to include FAMILY filter>
Begin
SET @TSQL=@TSQL+'where family=['+@DUTFAMILY+']'''
SET @TSQL=@TSQL+ ')'
End
-----------------
Here's the entire Stored Procedure:
CREATE PROCEDURE dbo.ewo_sp_DUTLookup
(
@DUTPROJECT char(25)=NULL,--Project
@DUTFAMILY char(10)=NULL,--Family
@DUTMODEL char(20)=NULL,--Model
@DUTYEAR char(4)=NULL,--Model Year
@DUTBEGIN char(25)=NULL,--Beginning of COV/DUT number
@DEBUG int=0
)
AS
DECLARE @OPENQUERY varchar(4000),
@TSQL varchar(4000),
@TWHERE varchar(4000),
@intErrorCode int
select @intErrorCode = @@ERROR,
@TSQL='',
@TWHERE=''
IF @intErrorCode=0
Begin
SET @OPENQUERY = 'SELECT * FROM OPENQUERY(VFP,'''
SET @TSQL = ' select dut_pk,cov,family,model,project,modelyr from vinmast '
End
set @intErrorCode = @@ERROR
IF @intErrorCode = 0 and
@DUTFAMILY is not NULL or
@DUTMODEL is not NULL or
@DUTPROJECT is not NULL or
@DUTYEAR is not NULL or
@DUTBEGIN is not NULL
set @TWHERE=' where '
-- Check for Family criteria
If @intErrorCode = 0 and @DUTFAMILY is not NULL and Len(@TWHERE)>0
SET @TWHERE=@TWHERE+' family=['+@DUTFAMILY+'] AND '
set @intErrorCode = @@ERROR
-- Check for Model criteria
If @intErrorCode = 0 and @DUTMODEL is not NULL and Len(@TWHERE)>0
SET @TWHERE=@TWHERE+' model=['+@DUTMODEL+'] AND '
set @intErrorCode = @@ERROR
--Check for Project criteria
If @intErrorCode = 0 and @DUTPROJECT is not NULL and Len(@TWHERE)>0
SET @TWHERE=@TWHERE+' project=['+@DUTPROJECT+'] AND '
set @intErrorCode = @@ERROR
--Check for Model Year
If @intErrorCode = 0 and @DUTYEAR is not NULL and Len(@TWHERE)>0
SET @TWHERE=@TWHERE+' modelyr=['+@DUTYEAR+'] AND '
set @intErrorCode = @@ERROR
--Check for beginning of DUT
If @intErrorCode = 0 and @DUTBEGIN is not NULL and Len(@TWHERE)>0
Begin
SET @DUTBEGIN=RTRIM(@DUTBEGIN)
SET @TWHERE=@TWHERE+' substr(cov,1,'+cast(len(@DUTBEGIN) as char(20))+')=['+@DUTBEGIN+'] AND '
End
set @intErrorCode = @@ERROR
IF @intErrorCode=0 AND substring(@TWHERE,Len(@TWHERE)-3,4)=' AND '
Begin
set @TWHERE=Substring(@TWHERE,1,Len(@TWHERE)-3)
select @intErrorCode=@@ERROR
End
SET @TWHERE=@TWHERE+''')'
IF @debug<>0 and @intErrorCode=0
Begin
print @intErrorCode
print @OPENQUERY
print @TSQL
print @TWHERE
print @OPENQUERY+@TSQL+@TWHERE
End
IF @intErrorCode=0
EXEC (@OPENQUERY+@TSQL+@TWHERE)
GO
Peter
View 2 Replies
View Related
Jul 2, 2003
We have SQL Server 2000 on a Windows 2000 server and a mySQL database running on a Windows 2000 server.
We have used MyOLEDB driver(OLEDB) to link the mysql database.
How can I access the data stored in a Linked server?
Any help would be appreciated.
Thanks!!
this is our codeˇG
exec sp_addlinkedserver @server='OLEDB_test',
@srvproduct=N'',
@provider=N'MySQLProv',
@datasrc=N'203.xx.xx.xx',
@catalog = N'Store'
exec sp_addlinkedsrvlogin 'OLEDB_test','false',null,'root',''
select * from OLEDB_test.Store.root.Books
or
select * from OLEDB_test.Store..Books
error message:
Can't create OLE DB Provider 'MySQLProv' instanceˇC
OLE DB error trace [Non-interface error: CoCreate of DSO for MySQLProv returned 0x80040154]ˇC
by the wayˇG
1.We Create an ODBC System DSN that points to our MYSql server
2.We use OLEDB for ODBC to create a linked server to mySQL
3.We have got the query to work with openquery
but we can't updateˇBdeleteˇBmodify the data stored in a Linked server
View 1 Replies
View Related
Jun 13, 2001
I have an ODBC DSN that lets me see the data via Access, however, in EM I set up the DB2 server as a linked server using the OLEDB provider for ODBC, with a Linked server name of DB2DB, a product name of MY DB2 connection and the data source of db2 (which is the DSN name)
The Provider string, Location and Catalog I leave blank
Under security, I assign all users to be a valid username/password
I can then see the tables in EM, but when I try to query them in QA I get this
Select * from db2db...customer
Server: Msg 7313, Level 16, State 1 Line 1
Invalid Schema or catalog specified for provider 'MSDASQL'
I am using SS7.0, and DB2 connect V7.1
I do not have/use SNA server
My actual requirement is to have a job autmatically run every day to copy certain records onto the SQL Server, but the first step is to be able to query the DB2 data
any ideas ? I think I need to enter something in the catalog box, but what ?
thanks in advance.
View 1 Replies
View Related
Oct 12, 1999
I am trying to run a select statements against linked server.
I have NT server running SQL7 Enterprice and Rumba2000. I used Rumba driver to configure a DSN (ODBC based) to a AS400/DB2. Then I created a linked server. Good news are : I can see a list of tables.
Bad news : when I am trying to run a select statement either through stored procedures or directly in SQL analyzer I am receiving error message Object 'linkedservername.databasename.tablename' doesn't exist.
What am I missing here?
View 2 Replies
View Related
Mar 10, 2005
I didn't want to maintain similar/identical tables in a legacy FoxPro system and another system with SQL Server back end. Both systems are active, but some tables are shared.
Initially I was going to use a Linked Server to the FoxPro to pull the FP data when needed. This works. But, I've come up with what I believe is a better solution. Keep in mind that these tables are largely static - occassional changes, edits.
I will do a 1 time DTS from FP into SQL Server tables.
I then create INSERT and UPDATE triggers within FoxPro.
These triggers fire a stored procedure in FoxPro that establishes a connection to the SQL Server and fire the appropriate stored procedure on SQL Server to CREATE and/or UPDATE the corresponding table there.
In the end - the tables are local to both apps.
If the UPDATES or TRIGGERS fail I write to an error log - and in that rare case - I can manually fix. I could set it up to email me from within FoxPro as well if needed.
Here's the FoxPro and SQL Server code for reference for the Record Insert:
FOXPRO employee.dbf InsertTrigger:
employee_insert_trigger(VAL(Employee.ep_pk),Employ ee.fname,Employee.lname,Employee.email,Employee.us er_login,Employee.phone)
FOXPRO corresponding Stored Procedure:
FUNCTION EMPLOYEE_INSERT_TRIGGER
PARAMETERS wepk,wefname,welname,weemail,WEUSERID,WEPHONE
nhandle=SQLCONNECT('SS_PDITHP3','userid','password ')
IF nhandle<0
m.errclose=.f.
IF !USED("errorlog")
USE tisdata!errorlog IN SELECT(1)
m.errclose=.t.
ENDIF
SELECT errorlog
INSERT INTO errorlog (date, time, program,source,user) ;
values (DATE(), TIME(), 'EMPLOYEE_INSERT_TRIGGER','nhandle<0 PARAMS: '+STR(wepk)+wefname+welname+weemail+WEUSERID+WEPHO NE,GETENV("username"))
IF m.errclose
USE IN errorlog
ENDIF
RETURN
ENDIF
nquery="exec ewo_sp_insertNewEmployee @WEPK ="+STR(wepk)+",@WEFNAME ='"+wefname+"',@WELNAME ='"+welname+"',@WEEMAIL ='"+weemail+"',@WEUSERID ='"+weuserid+"',@WEPHONE='"+wephone+"',@RETCODE =0"
nsucc=SQLEXEC(nhandle,nquery)
SQLDISCONNECT(nhandle)
IF nSucc<0
m.errclose=.f.
IF !USED("errorlog")
USE tisdata!errorlog IN SELECT(1)
m.errclose=.t.
ENDIF
SELECT errorlog
INSERT INTO errorlog (date, time, program,source,user) ;
values (DATE(), TIME(), 'EMPLOYEE_INSERT_TRIGGER','nSucc<0 PARAMS: '+STR(wepk)+wefname+welname+weemail+WEUSERID+WEPHO NE,GETENV("username"))
IF m.errclose
USE IN errorlog
ENDIF
ENDIF
RETURN
SQL SERVER Stored Procedure called from FOXPRO Stored Procedure
CREATE procedure ewo_sp_insertNewEmployee (
@WEPK int,
@WEFNAME char(20),
@WELNAME char(20),
@WEEMAIL char(50),
@WEUSERID char(15),
@WEPHONE char(25),
@RETCODE int OUTPUT
)
AS
insert into WO_EMP (
WE_PK,
WE_FNAME,
WE_LNAME,
WE_EMAIL,
WE_USERID,
WE_PHONE
)
VALUES (
@WEPK,
@WEFNAME,
@WELNAME,
@WEEMAIL,
@WEUSERID,
@WEPHONE
)
IF @@ERROR <> 0
BEGIN
SET @RETCODE=@@ERROR
END
ELSE
BEGIN
-- SUCCESS!!
SET @RETCODE=0
END
return @RETCODE
GO
View 2 Replies
View Related
Jun 9, 2006
I need to link some data from SQL Server 2005 with Oracle 10 data.One way is to link Oracle server to SQL Server and use ROWSOURCE forretrieving data.What other ways for joing data from both databases exist ?Can I do it from SQLCRL VB - Stored Procedure ? If yes, what objectsshall I use for opening database and running an sql ?
When I tried to import system.data.oracleclient, it was not available. Do I need to install anything for being able to use it ?
Thanks a lot.
View 4 Replies
View Related
Aug 16, 2007
Hi,
Please bear with me if my vocabulary or phraseology is wrong (and if it is, I wouldn’t mind being corrected).
Background:
We have an application that uses a Cache database (which is a complete black box for me). The data is exposed to us through ODBC. We have set up a linked server that I can see the names of the tables and views in Enterprise Manager and can query on them with Query Analyzer.
Problem:
There are a lot of extra long string fields. I can see the data in both Crystal Reports and Access (in Crystal they are shown defined as sting [32395] and in Access they are shown as a Memo field).
I cannot get Query Analyzer to display the data. I have tried the following select statements:
select definition_text from cwsavpmtest_live..system.problem_def_data
select cast(definition_text as ntext) from cwsavpmtest_live..system.problem_def_data
select convert(ntext,definition_text) from cwsavpmtest_live..system.problem_def_data
select cast(definition_text as text) from cwsavpmtest_live..system.problem_def_data
select convert(text,definition_text) from cwsavpmtest_live..system.problem_def_data
select cast(definition_text as varchar(8000)) from cwsavpmtest_live..system.problem_def_data
select convert(varchar(8000), definition_text) from cwsavpmtest_live..system.problem_def_data
… and get the same error for every one:
quote:
Server: Msg 7341, Level 16, State 2, Line 1
Could not get the current row value of column '[cwsavpmtest_live]..[system].[problem_def_data].definition_text' from the OLE DB provider 'MSDASQL'.
[OLE/DB provider returned message: Requested conversion is not supported.]
OLE DB error trace [OLE/DB Provider 'MSDASQL' IRowset::GetData returned 0x80040e1d].
So my question is: Am I out of luck and have to be content with looking at the data in Access or Crystal or is there some way I can look at these fields through Query Analyzer?
Thanks,
Laurie
View 1 Replies
View Related
Jun 8, 2006
I need to link some data from SQL Server 2005 with Oracle 10 data.One way is to link Oracle server to SQL Server and use ROWSOURCE forretrieving data.What other ways for joing data from both databases exist ?Can I do it from SQLCRL VB - Stored Procedure ? If yes, what objectsshall I use for opening database and running an sql ?Thanks a lot.
View 3 Replies
View Related
Nov 4, 2004
Dear All,
I like to know if anyone of you out there can help me solve this issue. I need to generate an SQL Query to access two different FOXPro (databases) connections.
Example,
Connection 1 - has a DSN setup of CMSBM and it sits in the path of D:/CMS/CMSBM/= and the table is bmboml15
Connection 2 - has a DSN setup of CMSMA and it sits in the path of
D:/CMS/CMSMA/= and the table is maprodl15
I am coding in ASP.NET using C#. I have tried the command like:
SELECT codeno, link, type FROM bmboml15 IN CMSBM INNER JOIN maprodl15 IN CMSMA ON bmboml15.codeno = maprodl15.codeno.
Obviously the above query is not a working one and a very poor construction.
Please help!
Thanks
Clo
View 1 Replies
View Related
Nov 1, 2007
Does anyone know how to attach a Foxpro database to SQL Server Express?
Thanks,
Grant
View 3 Replies
View Related
Sep 18, 2006
hi Experts,
I have a Issue table which stores the below data for many issue. some issue are duplicate to other and they are stored in a field Duplicate_of
ID
Duplicate_of
State
77637
65702
Duplicate
65702
42217
Duplicate
42217
-
Verified
i wanted to write a query or some stored procedure when passed 77637 should help me get 42217.
Hint : 77637 when passed has field Duplicate_of which point to 65702 and his state will be Duplicate, 65702 will be duplicate to 42217 and state will be duplicate and 44217 is not duplicate to anything and state will be other then Duplicate
i appreciate if somebody can help me think in some line to give me some idea.
/soni
View 1 Replies
View Related
May 12, 2015
I know how to use Linked server query to retrieve data from two different sql on premise instances.I would like to try the same on sql server instances hosted on azure.When I connect to sql instance, I don't see ServerOBjects->Linked server. I just see Database and security.Is this possible on sql azure, if so how can we achieve it
View 4 Replies
View Related
Sep 18, 2006
hi Experts,
I have a Issue table which stores the below data for many issue. some issue are duplicate to other and they are stored in a field Duplicate_of
ID
Duplicate_of
State
77637
65702
Duplicate
65702
42217
Duplicate
42217
-
Verified
i wanted to write a query or some stored procedure when passed 77637 should help me get 42217.
Hint : 77637 when passed has field Duplicate_of which point to 65702 and his state will be Duplicate, 65702 will be duplicate to 42217 and state will be duplicate and 44217 is not duplicate to anything and state will be other then Duplicate
i appreciate if somebody can help me think in some line to give me some idea.
/soni
View 5 Replies
View Related
Jun 11, 1999
i have an old database in foxpro. The table in foxpro now has been broken into more than tables in sql server 6.5 . how do i append the data to sql server database to the respective tables from the foxpro database.
vineet
View 1 Replies
View Related
Apr 25, 2007
Hi everyone,
I have worked soley with Sybase for almost ten years! Now I have been tasked with converting a bunch of data currently in a FoxPro database to a Microsoft SQL Server database. Short of writing some routines myself (which I don't mind doing), is there a shortcut for doing this? Any specifics would be great as it seems this could be mind boggling as far as dates go and so many other things!
Thanks so much!
Rachel
View 1 Replies
View Related
Nov 6, 2007
I have a report that accessed a Visual FoxPro 6.0 database via ODBC. Since I upgraded to Visual FoxPro 9.0, now I am getting the error:
Query Server Error
DMS-E-RBI_TABLE The table or view <table name> was not found in the dictionary
I've verified that the right path is setup and I've tried installing about every driver and none of them are working. I created a new database in 9.0 and the I can access it fine. Also, there are old tables that are accessible in the same path, just not the ones I need. Any ideas would be helpful..
View 1 Replies
View Related
Feb 24, 2006
I am using a lookup component in a SSIS data flow. The lookup is a select to a foxpro table. THe lookup works fine with full cache selected. I cannot get the lookup to work with a partial or no cache. I have the latest Foxpro OLE DB driver installed which I understand to support paramaterized queries. Has anyone had success with using cached lookup to Foxpro? Does anyone know how to set the lookup properties of sqlcommand and sqlcommandparam? I am unable to find any examples in BOL or on the web.
Here are some details. IF I go with "use a table or a view" option with the default cache query I get initialization errors
[lkp_lab_worst_value [6170]] Error: An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Visual FoxPro" Hresult: 0x80040E14 Description: "Command contains unrecognized phrase/keyword.".
In the advanced editor I see
SQLCommand set to
"select * from `kcf`"
and SQLCommandParam set to
"select * from
(select * from `kcf`) as refTable
where [refTable].[patkey] = ? and [refTable].[dayof_stay] = ? and [refTable].[modifier] = ? and [refTable].[kcf_code] = ? and [refTable].[source] = ? and [refTable].[kcf_time] = ?"
I believe the above error is because Foxpro V7 does not support the inner subselect . In addition the query contains CRLF without a continuation character (";").
If I remove the CRLF in the sqlcommandparam query, using the advanced editor, I get this design time error "OLE D error occurred while loading column metadata. Check the sqlcommand and sqlcommandparam properties". The designer requires both properties to be set, its unclear to me how the interact.
I cannot find any examples in BOL or on the web on how to set these 2 properties. Can someone give me a few guidelines?
I can get past the design errors by changing sqlcommandparam to a plain select that is VFP 7 compatible ( I removed the subselect and the square brackets):
select * from kcf as refTable where refTable.patkey = ? and refTable.dayof_stay = ? and refTable.modifier = ? and refTable.kcf_code = ? and refTable.source = ? and refTable.kcf_time = ?
But then I get a runtime error
[lkp_lab_worst_value [6170]] Error: An OLE DB error has occurred. Error code: 0x80040E46. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Visual FoxPro" Hresult: 0x80040E46 Description: "One or more accessor flags were invalid.".
[lkp_lab_worst_value [6170]] Error: OLE DB error occurred while binding parameters. Check SQLCommand and SqlCommandParam properties.
Any idea on what I should try next ?
View 3 Replies
View Related
Mar 9, 2008
Could any one help me in
Writing code/query to export simple English text data from MSSQL Sever2000 to FoxPro2.6 dbf
aamir_net68@yahoo.com
View 1 Replies
View Related
Jul 23, 2005
I'm trying to access Visual Fox Pro Data from Sql Server 2000, Cananyone have any Idea ?Thanks
View 1 Replies
View Related
Aug 7, 2014
How can I add the option to import data from Visual FoxPro tables into SQL 2012 database?
View 0 Replies
View Related
Nov 10, 2014
I'm trying to find a way to insert data from a TableA on ServerA into TableB on ServerB using SSIS in Visual Studio.
The specification I was given is basically
Insert INTO TableB AS (Select * from TableA WHERE NOT EXISTS on TableB).
I can't use a linked server unfortunately.
I wonder if it possible to move data from tables on a linked server to a "normal database"? What am I doing wrong?
View 4 Replies
View Related
