Hi
I wrote query to get date from database SQL 2000 server. Sometime I get different date format not MMDDYYYY but number as Julian calendar?? Do you know what wrong with this? How can I wrote SQL so that all date will be MMDDYYYY?
Thanks
Daniel
E.g, i have a store procedure. The start date is long date (4/15/2007 3:00pm). i want to select the start date with a particular date (short date format 4/15/2006). Thanks in advance.
View 1 Replies View Relatedselect last_name,hire_date,to_char(hire_date,'DAY') DAYfrom employeesorder by to_char(hire_date-1,'d')i wanted to know how the function to_char(hire_date-1,'d') works...its basically a query used to find the day on which a employee washired ,also it requires that the query be sorted by the day of theweek on which the employee was hired.it'll be helpful is someone replies to this
View 2 Replies View RelatedI am new to SQL server, and am learning as I move an Access db to MSDE2000A. With Access db I run several different queries from a VB6 application in the basic format:
SELECT testdb.*
FROM testdb
WHERE testdb.datefield = #1/01/2004#
When working with the MDSE version of the db, problem is with the "#" delimiter of dates. MSDE is giving a bad query error. If I change the format to: datefield = '1/01/2004' , the query works on MSDE
However, using SQL builder in VB Design Environment I can run the query in either format and get a result.
Any suggests what I am missing? Thanks.
Dear All,
I'm having a query problem regarding to the date format. From a table, there's a record of patients' birthdate.
In order to identify their age, how should i perform the query?
Select * from patient where BirthDate.Year < 1950
I've tried the above query where i want to extract patients' records who born before 1950, however, it generates error. Can somebody help?
M i K e
Hi
I have a SQL table that contains date in this format :-
2006-07-02 16:20:01.000
2006-07-02 16:21:00.000
2006-07-02 16:21:01.000
2006-07-02 16:22:00.000
2006-07-02 16:22:02.000
2006-07-02 16:23:00.000
The date above contains seconds that I dont want, how can I remove those seconds so that the output looks like :-
2006-07-02 16:20:00.000
2006-07-02 16:21:00.000
2006-07-02 16:21:00.000
2006-07-02 16:22:00.000
2006-07-02 16:22:00.000
2006-07-02 16:23:00.000
Your help will be highly appreciated.
Is it possible to format the date field create_date (mm/dd/yyyy or mm/dd/yy)
I use the following query in stored proc. will be called in the asp.net page for population the datagrid.
select id, name, create_date from actionstable;
Please help, Thank you.
Hi! Good Day!
What is the syntax to format the datefield? The value of my datefield is like this:
10/13/2005 5:15:02 PM
What is the select query to filter the date only. My desired result should be:
10/13/2005
only.
Thanks :)
Hi
I am trying get my VB6 application to insert a record into a table (SQL Express) which has a datetime column but it would not process if the data format is differ to *American Date format*.
The date() function in VB returns 15/11/2006 which is in Australian Date format (DD/MM/YYYY) according to my setting in "Reginal and Lanuage Option-> Locale 0> English (Australia)" setting.
I get the following error:
Msg 242, Level 16, State 3, Server KITSQLEXPRESS, Line 1
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
The statement has been terminated.
My computer's locale is set to English (Australia) and I expect the datetime format would follow what is set in system locale
I've read an article somewhere on the net about how SQL 2005 eliminate the confusion of date conversion when read/write datetime records into a table...but it seems to me that it is still as in-flexible as MS Access
Is there a setting in the database that takes care of it?
Thanks
Hi All,
Is it possible to check the local system date format and then change the format to another format using SQL command in VB.
Eg.
-check current system format dd/MM/yyyy
-change current system format to MM/dd/yyyy format
Thanks
Jam.
Need some quick help here.. The data I got from the text file use the "04/11/2007" date format and the StockDate in MS-SQL use the datetime datatype.
My understanding is that the "04/11/2007" will default to the 04/11/2007 12:00 am" format in MS-SQL.
So, when I use the sql query, how do search only for the date part of the data in MS-SQL and match it to the data from text file? I tried this SQL Query below.
--snip--
SELECT RawID FROM tblPurchaseRaw WHERE VIN = '" & sVin.ToString.Trim & "' AND StockDate = '" & dStockDate.ToString.Trim & "'
--snip--
That way, if I get a row then I know the data is there. If I don't get a row then I know the data is not there.
Bold: I get it now. It is all automatic as MS-SQL does it automatically...
Not sure why SQL Server displays different date formats for the same date in Enterprise Manager query window vs. SQL Query Analyzer.
When I see table rows through enterprise manager the date field looks like 3/18/2008 12:30:00 PM
Whereas when I run a query a query in Query Analyser/or through any other application the date is shown in a different format: 2008-03-18 12:30:00.000
Is there a setting in SQL Server that can remove the date format inconsistency?
Hi,
I have a column date in my database which I should send it to Oracle database. The Date format in Oracle is number. I don’t know how should I convert the date to that format?
Example :
SQL FormatOracle Format
02/16/05 105046
Thanks.
We are migrating data from old DB2 systems to sql server 2012, the DATE FORMAT in those systems is in decimal format with 7 digits. CYYMMDD format.
I need to convert this into DD/MM/YYYY format.
I have date coming to one page as a string in the following format"May 4 2005 12:00AM"
I need to query one of my tables using this date in combination of other nondate values. How can I convert this date into valid sql server datetime format before I query a database tables
Please help
Hi,I have a problem with updating a datetime column,When I try to change the Column from VB I get "Incorrect syntax near'942'" returned from [Microsoft][ODBC SQL Server Driver][SQL Server]'942' is the unique key column valueHowever if I update any other column the syntax is fineThe same blanket update query makes the changes no matter what isupdatedThe problem only happens when I set a unique key on the date field inquestionKey is a composite of an ID, and 2 date fieldsIf I allow duplicates in the index it all works perfectlyI am trying to trap 'Duplicate value in index' (which is working onother non-date columns in other tables)This is driving me nutsAny help would be appreciated
View 5 Replies View RelatedUsing DTS package in 2000 version, I am dumping TXT file contents into SQL Table,
I have one column having date in format YYYYMMDD(20070929) and corresponding column in SQL is datetime, but it fails on data type mismatch.
I have no choice of making date column in SQL to string or Varchar etc,
is there any way to make that date column in SQL to convert the value upon transformation from format (YYYYMMDD) to M/DD/YYYY (9/29/2007).
many many thanks,
Dear Expert!
A server with SQL 2005 sp2, Reporting Services and Sharepoint services (ver 3.0) (in integrated mode) gives an odd error. When viewing a Reporting Services report with a Date Time Picker, the date chosen is wrong. The preferred setting is Danish with the date format dd-mm-yyyy. The date picker shows the months in Danish but when selecting a date, and clicking on the Apply-button, the date reformats to US (mm-dd-yyyy).
Example:
When choosing 5th of September 2007 and clicking apply, it shows in the picker, 9th of May 2007.
When choosing 26th of September 2007 and clicking apply, it shows, again in US format, the RIGHT date but adds a timestamp 12:00 AM? in the end, making further enquiries to fail.
The report itself receives the right date and shows correctly. The only case it fails is, when the time stamp appears.
The server is a 32-bit one with 4 GB RAM. A testserver with identical collation on the Reportserver database cannot recreate the error. The site containing the reports has been set to Danish in the regional settings. To Reinstall is not an option.
The test report has no database connection whatsoever.
When setting the site to US, the timestamp wont appear at all.
The server has been restarted and the installation procedure was of the simple kind. No special tweaks at all.
Any advice would be greatly appreciated.
Kind Regards
Johan Rastenberger
I am having report parameter end date I am showing the default value "5/21/2007 11:59:59 PM" in the end date paramter. And also I want to show date time format "(MM/DD/YYYY HH:MMS)" in the right hand side of the parameter. How to do this?
Thank You
i have a excel file in which i have a date column it having the below date formats below
Install Date
20140721
31.07.2014
07.04.2015
20150108
20140811
20150216
7/21/2014
11.08.2014
07.08.2014
So using SSIS how we would load this date column into the table into one format like dd/mm/yyyy or any single date format
Aim – Convert the following field ”[INSTALLATION_DATE]” date format from “20090709” Into this “2009-07-09” ,
Also create a new column called “BegMonth” which selects first day of the given month of the converted date column
The table is ;
SELECT
[FDMSAccountNo],
[INSTALLATION_DATE]
FROM [FDMS].[dbo].[stg_LMPAB501]
Results
FDMSAccountNoINSTALLATION_DATE
87800000088420030521
Required Results
FDMSAccountNoINSTALLATION_DATEBegMonth
8780000008842003-05-212003-05-01
I am using reporting services, when I go to view my report in Report Manager (web browser is IE7), I choose a date from a date picker control, and the date that populates the date field is in US format mm/dd/yyyy, however in my regional settings, although I have English(United States) I have altered my short date format to be dd/mm/yyyy.
Currently my report will display an error saying the date is an invalid format if I pick a date that violates the mm/dd/yyyy format. I want it to display the date format that I have defined in my regional settings, without modifying the 'Language Preference' settings for IE.
The report properties has =User!Language for the 'Language' property.
Does anyone have any suggestions?
dear all can anybody help me soon....
i am using visual studio 2005 webapplication based on sql server 2005 database.
i can get one date from sql using one query.
I am selecting my field based on following code CONVERT(varchar, Oman.Positions.Datum, 9) AS LastUpdate
this case my output is May 4 2008 3:19:45:000AM.....
this output is correct but from this output i want to avoid millisecond part.
ie i want the output like May 4 2008 3:19:45 AM....
how i can do this
regards
I need to do the following and am hoping someone can help me out.
I have C#(asp.net app) that will call a stored procedure. The C# will pass in a date to thestored procedure. The date is in the format YY/MM/DD. Once inside of the stored procedure, the datepassed into the stored proc needs to be compared to todays date. Todays date must be determined inthe SQL.
So basically here is my pseudo code for what I am trying to accomplish. Basically I just am afterthe comparison of the two values:
If @BeginDate < TodaysDate
The difficult part is how to obtain the value for "TodaysDate"
Taking into consideration that "TodaysDate" should probably be in the format of YY/MM/DD considering that is how the date it is to be compared with is being passed in.
Can someone please code this out for me in Microsoft SQL. I would be forever grateful.
Hi,
I Have this simple convertion in a Script component
Dts.Variables("dateOfProcess").Value = CDate(lineMCF.Substring(30, 2) + "/" + lineMCF.Substring(28, 2) + "/" + lineMCF.Substring(24, 4))
this works fin in my development environment which has a spanish version of SQL Server and uses "DD/MM/YYYY" as date format.
but the production environment has an english version of SQL Server and "MM/DD/YYYY" date format, so the package crashes in this server.
How do I convert the string to date not depending on the SQL server language.
thanks.
Hello,
I am using the calender parameter and I need to convert my data date format to the one that matched that is returned on selecting a date from this calender. Can you show me what this format is.
how can I convert my existing date format to this format. The existing date format is 2007-07-26 21:27:13.000
thank you
Kiran
I have a table that has a DATE field named. AccountingDate that is in the format YYYY-MM-DD. It's not a VARCHAR field. I simply want to convert this date field into the format MM/DD/YYYY and call it New_Accounting_Date.
I've played with various combinations of CAST & CONVERT but haven't been able to get it to work.
Below is my latest effort which returns the error:
Incorrect syntax near the keyword 'as'
What code would work to return a MM/DD/YYYY value for New_Accounting_Date?
Select GLBATCH.AccountingDate,
convert(GLBATCH.AccountingDate as date),101) AS New_Accounting_Date
from GLBATCH
Hello,
anybody has query regarding converting date from Julian into our our dateformat?.
Your Help really apreciated,
Thanks,
Ravi
Hello!I inserted data to dbase, but I soon got error message.. Europien date format is dd.mm.yyyy So I get date from text box:<asp:textbox id="date" style='Z-INDEX: 102; LEFT: 411px; POSITION: absolute; TOP: 42px' runat='server' Width='185px' Height='22px'>Date</asp:textbox>Date which is get as string is inserted to dbase by code behind:string insert = "INSERT INTO tbl_UFD_PlanPremier (DAT_Prem) VALUES ('"+date.Text+"')";I thought that that will work ok, but.. By date 1.1.2006 was everithing ok, problems begann with 30.5.2006 - I get error message: failed to convert char data type to smalldatetype.I was seeking for reason and I found out that date in SQL database is saved in format dd.mm.yyyy but string which is inserting by ASP function:ExecuteNonQuery() into dbase has format mm.dd.yyyy - when I wrote to textbox date 5. 30. 2006, it passed allrightIs there any help? like how to change date format? Thanks
View 3 Replies View RelatedI have a written a stored procedure and excecuting it and displaying it in gridview(ASP.NET). I am getting Birthdate in the form of 8/23/1956 12:00:00 AM. I just need 8/23/1956. I have defined it as smalldatetime in stored procedure. How can I get it in that format ?
HELP.........
Hello all...
is it possible to change the format of 2/26/2008 1:57:00 PM to 02/26/2008 in the sql table?
hi is there a function that can get the date format of sql server
View 1 Replies View RelatedI have computer with Serbian standards and formats (Regional Settings).I use datepicker control to select date, but when I try to insert it into database (DatePicker1.Value) it throws error.What should I set up in order to be able to insert date into ms sql 2000 database, without having to change Regional settings?This is last question for tonight Thanks,Milan
View 2 Replies View Related