Query Getting Most Recent Record
Jun 16, 2015
Here's the scenario. Consider the following sample data.
CREATE TABLE #MyTest
(
CustomerNumber INT,
Division CHAR,
SalesRepType INT,
SalesRepNumber INT,
EnterDate DATE
[code]....
Essentially, what I’m attempting to do is for each Customer, Division, SalesRepType determine who the most recent assigned SalesRepNumber is and when (EnterDate) that person was assigned. So using the sample data, I would expect the following results.
CustomerNumberDivisionSalesRepTypeSalesRepNumberAssignedDate
10000A11002/1/2015
10000A23001/28/2015
10000B14002/1/2015
10000B26002/2/2015
I’ve tried various ways of using a CTE and ROW_NUMBER trying to get at this, but the area that is giving me the problem is in Division A, SalesRepType 1. Here is what gets me close, but I’m picking on SalesRepNumber 200 instead of 100 for Division A and
SalesRepType 1.
WITH
cteCust (RowNum, CustomerNumber, Division, SalesRepType, SalesRepNumber, BeginDate)
AS
(
SELECT
[code]....
View 4 Replies
ADVERTISEMENT
Apr 2, 2015
So I have a query that need to find the most recent datetime record each day for a customer. So I have a query that looks like this:
SELECT
dhi.[GUID],
dhi.[timestamp],
la.[bundle_id],
dhi.[value]
FROM
[dbo].[DecisionHistoryItem] as dhi WITH(NOLOCK)
[Code] ....
View 4 Replies
View Related
Apr 23, 2008
Could anybody help me with the following scenario:
Table 1 Table2
ID,Date1 ID, Date2
I would like to link the two tables and receive all records from table2 joined on ID and the record from table1 that has the most recent date.
Example:
Table1 data Table2 Data
ID Date1 ID Date2
31 1/1/2008 31 1/5/2008
34 1/4/3008 31 4/1/2008
31 3/2/2008
The first record in table2 would only link to the first record in table1
The second record in table2 would only link to the third record in table1
Any help would be greatly appreciated.
Thanks
View 4 Replies
View Related
Sep 4, 2007
I am trying to think of the easiest solution to do this.
What it is, is that I am trying to be alerted, if an account has not had its daily reports ran for x days (for example, 3 days).
I have two tables.
One is a table, with a list of AccountIDs that are to have the report done.
Another is a Log Table, which a record is inserted whenever a report has run. So, if a report has not run, it will not have a record in that table.
Here is the table setup with sample data. I am only going into basics, as the tables are used for a couple other things which are not needed for this.
Code:
Table: Reports_AccountID
ReportID | AccountID
--------------------------
5 | 1234
5 | 987
4 | 1234
3 | 1234
5 | 5677
Log: Reports_Log
LogID | ReportID | AccountID | ReportRunDate
----------------------------------------
9876 | 5 | 1234 | 9/4/2007 10:35:43 AM
9875 | 5 | 987 | 9/4/2007 10:35:43 AM
9874 | 4 | 1234 | 9/4/2007 9:05:43 AM
9873 | 3 | 1234 | 9/4/2007 9:30:17 AM
9872 | 5 | 1234 | 9/3/2007 10:35:43 AM
9871 | 5 | 987 | 9/3/2007 10:35:43 AM
9870 | 4 | 1234 | 9/3/2007 9:05:43 AM
9869 | 3 | 1234 | 9/3/2007 9:30:17 AM
9868 | 5 | 1234 | 9/2/2007 10:35:43 AM
9867 | 5 | 987 | 9/2/2007 10:35:43 AM
9866 | 5 | 5677 | 9/2/2007 10:35:43 AM
9865 | 4 | 1234 | 9/2/2007 9:05:43 AM
9864 | 3 | 1234 | 9/2/2007 9:30:17 AM
so if i wanted to know what report for reportID 5 hasn't run in the past 2 days, it would be accountID of 5677 (last ran on 9/2/2007 10:35:43 AM)
I am not sure where to even start. I am thinking I can grab the latest report ran for all Accounts in the Reports_AccountID table (create temp table and insert most recent log record into that table), and do a date difference between the date and current datetime and select based on datedifference > 2 ?
or would the best way is to do an inner join between the 2 tables for all reports ran in the past 2 days, and then whatever account is not listed in that query, is a report that has not run (do a subquery?)
just trying to think of the best way to do this. any tips/advice would be appreciated
View 6 Replies
View Related
Nov 13, 2007
Please concider the line of code below. it doesnt quite work how i want it to. i need it to only pull records where there isnt any activity completed (actualend) after a given period. and only show the most recent activity per regardingobjecid(sales person) however it returns all the records before that period and shows me the most recent one up to that time. Please help.
here is the code
SELECT new_ratingname, regardingobjectidname, actualend, owneridname, createdbyname, activitytypecodename, count(*) AS Total
FROM (SELECT filteredcontact.new_ratingname, filteredactivitypointer.regardingobjectidname, filteredactivitypointer.actualend,
filteredactivitypointer.Owneridname, filteredactivitypointer.createdbyname, filteredactivitypointer.activitytypecodename, row_number()
OVER (Partition BY regardingobjectid
ORDER BY actualend DESC) AS recid
FROM FilteredActivityPointer INNER JOIN
FilteredContact ON FilteredContact.contactid = FilteredActivityPointer.regardingobjectid
WHERE new_ratingname NOT IN ('dead', 'archive', 'continous updates') AND filteredactivitypointer.statecodename = 'completed' AND
filteredactivitypointer.owneridname IN (@user) AND filteredactivitypointer.createdbyname NOT IN ('melvin felicien', 'suzette collymore', 'gasper ') AND
filteredactivitypointer.activitytypecodename IN ('phone call', 'e-mail', 'fax') AND filteredactivitypointer.actualend <= dateadd(d,
- CAST(@NeglectedDays AS INT), GetUTCDate())) AS d
WHERE recid = 1
GROUP BY d .actualend, d .regardingobjectidname, d .owneridname, d .createdbyname, d .activitytypecodename, new_ratingname
ORDER BY d .actualend
Compnetsyslc
View 4 Replies
View Related
Dec 21, 2006
Every hour we capture some values from our factory (position of pumps, valves, ...) in our sql server 2000 db.
Normally 1 record is added to the db.
00:00:00
01:00:00
02:00:00
...
21:00:00
22:00:00
23:00:00
All of these values are displayed in an Excel sheet. One sheet contains all the data from one month.
I noticed a problem last week when 2 records were added: first one at 19:00:00 and the second one at 19:00:01
We only want to keep the most recent record (19:00:01) in a situation like this but I can't seem to work out an SQL-statement :o
This is what we have know. It used to work fine untill we had 2 record being added instead of one.
SELECT TimeOfCapture, Value1, Value2, Value3
FROM FactoryTable
WHERE (MONTH(TimeOfCapture) = MONTH(GETDATE())) AND (YEAR(TimeOfCapture) = YEAR(GETDATE()))
View 1 Replies
View Related
Apr 27, 2004
Hi,
I want to construct a query that would give the most recent record. Table data looks like -
F1F2F3 F4
20016395074/7/2004 15:40:55
23516395074/6/2004 9:31:54
All columns are strings as the data is obtained from text file. Column F3 can have same or different dates. In the above data select 1st record as it is the most recent.
If data is like -
F1F2F3 F4
20016395074/7/2004 15:40:55
23516395074/7/2004 19:31:54
Select the 2nd record.
How do I construct the SQL query?
Let me know.
View 1 Replies
View Related
Feb 12, 2014
by executing this qry i will get below result ,in that TId is duplicates that is from that i want recent record with same result.i want last one if TId comes duplicate record. any one ans pl
select sa.GrandTotal, sa.TId, sa.Id,sa.Date, pr.PName,
pr.PCode from Sales sa
Left Outer Join Product pr on sa.Pid = pr.Id where sa.GrandTotal is not null
GrandTotalTIdIdDate PNamePCode
200 122014-01-30 18:46:55.000RK100
560 252014-01-30 18:47:49.000RK100
420 262014-01-30 19:55:11.000RK100
View 1 Replies
View Related
Jul 20, 2005
MSSQL2000I have a table that contains customer transactionsCustomerIDTransactionTransactionDate....I need to select the most recent record that matches a specific CustomerID.I am fairly new to SQL, could someone provide a sample select statement.TIATim Morrison-- Tim Morrison--------------------------------------------------------------------------------Vehicle Web Studio - The easiest way to create and maintain your vehicle related website.http://www.vehiclewebstudio.com
View 3 Replies
View Related
Oct 29, 2014
We have a work order notes table in our ERP system, and I want to see the most recent note record for each work order. Sometimes there will one be one, so I want to see all those, but sometimes there will be several notes for each work order and in this case I want to see only the most recently added note for that work order.
The query below shows some results as an example. In this case I want to see all the records except for work order number DN-000023 where I only want to see the note dated/timed 07-12-2011 16:52 (the most recent one).
select id, worknumber, date, notes from worksordernotes
id worknumber date
----------- ------------ ----------------------- --------------------
1 DN-000056 2011-12-07 13:22:00 13.20 PM JAMES- SPOK
2 DN-000079 2011-12-07 14:24:00 JCB HAVE TOLD ME THE
4 DN-000065 2011-12-07 15:48:00 ANDY FROM SITE RANG
5 DN-000023 2011-12-07 15:54:00 CHASED THIS 4 TIMES
6 DN-000023 2011-12-07 16:52:00 HOLTS ATTENDED THIS
7 DN-000092 2011-12-08 09:50:00 RETURNING WITH PARTS
View 3 Replies
View Related
Apr 25, 2008
Hello, i have this problem
tbl1 :{ pcb varchar(30) ,serial varchar(30)},result varchar(30)
tbl2: { pcb varchar(30) ,date_time varchar(30),result varchar(30),data1 varchar(30),data2 varchar(30),}
what i need is for a range of serials get the pcb (from tbl1) and for those pcb's get as resultSet the table
tbl3:{pcb,serial,data1,data2} containing most recent data on date_time column.
example. tbl1 ={ pcb1,sn1,pass}
pcb2,sn2,pass
pcb3,sn3,pass}
tbl2={pcb1,date1,pass,dataX1,dataY1
pcb1,date2,pass,dataX2,dataY2
pcb2,date3,pass,dataX3,dataY3
pcb3,date4,pass,dataX4,dataY4
pcb1,date5,pass,dataX5,dataY5
pcb2,date6,pass,dataX6,dataY6}
where date1 is the most recent date
Request:what i want is for serial>=s1 and serial<=s2 get
pcb1,sn1,date1,dataX1,dataY1
pcb2,sn2,date3,dataX3,dataY3
What i already did is this:
Code Snippet
select max(CONVERT(DATETIME,tbl2.date_time,103)),tbl1.serial,tbl2.pcb
from tbl2
left JOIN tbl1
ON tbl2.Pcb=tbl1.pcb
where tbl1.serial>='1' and tbl1.serial<='53'
and tbl2."Result" like 'pass' and tbl1."result" like 'pass'
group by tbl2.pcb,tbl1.serial
And this works correctly.But unfortunately i also need data1 and data2 columns from tbl2.
If i include them in the Select Clause i have to include them also in the group by ,and this gives me also duplicate records.I mean it would return from tbl2, all records containing pcb1,pcb2.
How can i resolve this issue?
Thank you very much,
ElectricC
View 1 Replies
View Related
Sep 3, 2007
Given the Patients and PatientVisits tables as per below, how do I obtain the most recent (latest) Weight and Height for each patient as per http://www.hazzsoftwaresolutions.net/selectStatement.htm
The result of the query should only return 3 rows/records,not 5. Thank you. Greg
Code Snippet
select p.ID, p.FirstName,p.LastName,DATEDIFF(year, p.DOB, getdate()) AS age
,pv.WeightPounds, pv.HeightInches
from Patients as p
inner join PatientVisits as pv
ON p.ID = PV.PatientID
order by pv.VisitDate desc
INSERT INTO Patients (ID, FirstName,LastName,DOB)
select '1234-12', 'Joe','Smith','3/1/1960'
union
select '5432-30','Bob','Jones','3/1/1960'
union
select '3232-22','Paul','White','5/12/1982'
INSERT INTO PatientVisits (PatientID, VisitDate,WeightPounds,HeightInches)
select '1234-12', '10/11/2001','180','68.5'
union
select '1234-12', '2/1/2003','185','68.7'
union
select '5432-30','11/6/2000','155','63.0'
union
select '5432-30','5/12/2001','165','63.0'
union
select '5432-30','4/5/2000','164','63.5'
union
select '3232-22','1/17/2002','220','75.0'
CREATE TABLE [dbo].[Patients](
[PID] [int] IDENTITY(1,1) NOT NULL,
[ID] [varchar](50) NULL,
[FirstName] [nvarchar](50) NULL,
[LastName] [nvarchar](50) NULL,
[DOB] [datetime] NULL,
CONSTRAINT [PK_Patients] PRIMARY KEY CLUSTERED
CREATE TABLE [dbo].[PatientVisits](
[ID] [int] IDENTITY(1,1) NOT NULL,
[PatientID] [nvarchar](50) NULL,
[VisitDate] [datetime] NULL,
[WeightPounds] [numeric](18, 0) NULL,
[HeightInches] [decimal](18, 0) NULL
) ON [PRIMARY]
View 11 Replies
View Related
Apr 13, 2007
I have a fairly complex SP with 3 tables the idea being to display a Region, Client and EventI want to show only the last event for each client
I have replaced my event table with a View which returns the TOP 1 but all I get is the most recent of all records I want eg:Region 1, Client 1, Most recent event Region 1, Client 2, Most recent event Region 1, Client 3, Most recent event
View 2 Replies
View Related
Aug 27, 2005
I am trying to pickup the most recent record by Product and Supplier.
eg.
Rec Prod Supp Date
1 1000 WES01 Jan 1/2005
2 1000 WES01 Apr 8/2005
3 1001 WES01 Apr 8/2005
4 1001 NAN04 Feb 15/2005
The Result I want is as follows:
Rec Prod Supp Date
2 1000 WES01 Apr 8/2005
3 1001 WES01 Apr 8/2005
4 1001 NAN04 Feb 15/2005
I have tried various methods with the TOP 1 and DISTINCT statements, but have not been able to get the results I am looking for. Help would be appreciated.
View 4 Replies
View Related
Apr 5, 2007
I got some issues regarding selecting the most recent record from a datetime type column.
The probelm consists in following:
Table: News
Needed columns: Letter [varchar]
DateTimePublication [datetime]
Table News: Letter DateTimePublication
FR1_dd_mm_yy dd.mm.yy hh:mm:ss
FR1_dd_mm_yy dd.mm.yy hh+1h:mm:ss
FR1_dd_mm_yy dd.mm.yy hh-2h:mm:ss
EN1_dd_mm_yy dd.mm.yy hh+3h:mm:ss
EN1_dd_mm_yy dd.mm.yy hh+4h:mm:ss
EN1_dd_mm_yy dd.mm.yy hh-5h:mm:ss
DU1_dd_mm_yy dd.mm.yy hh:mm:ss
DU1_dd_mm_yy dd.mm.yy hh+1h:mm:ss
DU1_dd_mm_yy dd.mm.yy hh-2h:mm:ss
FR2_dd_mm_yy dd.mm.yy hh:mm:ss
FR2_dd_mm_yy dd.mm.yy hh+1h:mm:ss
FR3_dd_mm_yy dd.mm.yy hh-2h:mm:ss
EN2_dd_mm_yy dd.mm.yy hh+3h:mm:ss
EN3_dd_mm_yy dd.mm.yy hh+4h:mm:ss
EN3_dd_mm_yy dd.mm.yy hh-5h:mm:ss
DU1_dd_mm_yy dd.mm.yy hh:mm:ss
DU3_dd_mm_yy dd.mm.yy hh+1h:mm:ss
DU4_dd_mm_yy dd.mm.yy hh-2h:mm:ss
The ideea is that there are letters with the same name [Letter] but different DateTimePublication ... and I need only the letters with the most recent DateTimePublication for every letter type like FR_dd_mm_yy/EN_dd_mm_yy/DU_dd_mm_yy.
Thank you for your time and consideration!
SenneK
View 4 Replies
View Related
Nov 6, 2007
If I have a table structure similar to the following, how might I query it to obtain the Transaction ID, Transaction Date, and Customer Name for the most recent transaction per customer only:
TransactionTable:
TransactionID TransactionDate TransactionType CustomerName
1 10/1/07 1 Bob
2 8/30/07 2 Janet
3 9/17/07 1 Mike
4 9/25/07 1 Bob
The following query will return all records in the table other than Janets...not what I want:
SELECT Transaction ID, TransactionDate, CustomerName
FROM TransactionTable
WHERE TransactionType = 1
ORDER BY TransactionDate DESC
The following query will return all records in the table other than Janets again, because DISTINCT will use the combo of TransactionID, TransactionDate, and Customer name for uniqueness...not what I want:
SELECT DISTINCT Transaction ID, TransactionDate, CustomerName
FROM TransactionTable
WHERE TransactionType = 1
ORDER BY TransactionDate DESC
The results set I'm looking for would be the following, where only the most recent entry per customer with TransactionType 1 is returned (i.e. one record for Bob):
TransactionTable:
TransactionID TransactionDate CustomerName
1 10/1/07 Bob
3 9/17/07 Mike
I believe I need an appropriate subquery to yield the results I desire, but can't sort out what it is? I do not want to execute multiple queries but subqueries are fine. Unfortunately there's probably an easy answer that my brain is not currently generating. Any help would be appreciated.
Note, this is not a real table, but a sample to illustrate the concept for the query I need.
Thanks.
View 6 Replies
View Related
Sep 19, 2015
The "Last" function in the query below (line 4 & 5) is not exactly what I'm after. The last function finds the last record in that table, but i need to find the most recent record in the table according to a date field.
Code:
SELECT
tblinmate.statusid,
tblinmate.activedate,
Last(tblclassificationhistory.classificationid) AS LastOfclassificationID,
Last(tblsquadhistory.squadid) AS LastOfsquadID,
tblperson.firstname,
tblperson.middlename,
tblperson.lastname,
[Code] ....
The query below finds the most recent record in a table according to a date field, my problem is i dont know how to integrate this Query into the above to replace the "Last" function
Code:
SELECT a.inmateID,
a.classificationID,
b.max_date
FROM (
SELECT tblClassificationHistory.inmateID,
tblClassificationHistory.classificationID,
[Code] .....
View 1 Replies
View Related
Jun 16, 2014
I am working on a query that needs to return the record order number with the most recent requested delivery date.
It seems to work most of the time, but I have found some glitches for some of the items.
example is my item 10702, it is showing 2 records (both valid ones)
Record 1 is order # 10450-0, requested delivery date 03/21/2014
Record 2 is order # 10510-0, requested delivery date 04/29/2014
I need to only get the records with the most recent delivery date, in this example that would be 04/29/2014
This query is what I have so far:
SELECT
s.PriorQuoteNumber
,s.PriorItemNumber
,s.PriorQuoteDate
FROM
(
SELECT
s.SalesQuoteNumberAS 'PriorQuoteNumber'
[code]....
WHERE s.rn = 1What am I missing in my query> how can I change it so it only returns the most recent date?
View 9 Replies
View Related
Feb 23, 2015
I have a table full of service invoice records. Some of the invoices are continuous, meaning that there may be an invoice from 01-16-2015 through the end of that month, but then another invoice that starts on feb 1 and goes for 6 months.
I want to only pull the most recent. Keep in mind that there may be other invoices in the same table for a different period. An example might be:
FromDate ToDate Customer Number Contract Number
02/01/2015 07/31/2015 2555 456
01/15/2015 01/31/2015 2555 456
04/01/2013 09/30/2015 2555 123
03/13/2013 03/31/2013 2555 123
From this table, I would like a query that would give me this result:
01/15/2015 07/31/2015 2555 456
03/13/2013 09/30/2015 2555 123
There will likely be more than just 2 consecutive records per contract number.
View 4 Replies
View Related
Jun 28, 2007
I'm trying to retrieve the most recent data using the query below. The issue is there are multiple records which prevent distinct from working. If I could somehow get the most recent data (based on the eventdate field), that would work.
How would I go about this? I've tried order by and group by as well as max but that didn't seem to work.
Any ideas would be greatly appreciated!
SELECT DISTINCT
TOP 100 PERCENT SITES.Shape, SITES.OBJECTID, vw_sitemap.INTAKE_DATE, SITES.Expr6,
vw_sitemap.intake_num, vw_sitemap.ProjectName, vw_sitemap.ProjectType, vw_sitemap.ApplicantName,
vw_sitemap.PlannerInitials, vw_sitemap.file_num, vw_sitemap.status, vw_sitemap.EventDate
FROM SITES INNER JOIN
vw_sitemap ON SITEPTS.Expr6 = vw_sitemap.intake_num
WHERE (vw_sitemap.INTAKE_DATE > CONVERT(DATETIME, '2004-12-31 00:00:00', 102))
View 7 Replies
View Related
May 24, 2008
I've got a table like so
date | number___________|_____________
2007-01-01 | 432007-01-02 | 652007-01-03 | 232007-01-04 | 652007-01-05 | 232007-01-06 | 11
2007-01-07 | 52
2007-01-08 | 83
2007-01-09 | 44
and I want to get the most recent date in the past which I must go back where the sum of the numbers of the number column if greater than a certain number.
EG. From the above data, the date which I must go back to get a sum of 195 is 2007-01-05
as 44+83+52+11+23 is the least amount that is greater than 195.
Can anyone help, is this even possible? I'm flummoxed!
View 2 Replies
View Related
Feb 8, 2006
Hi,
I have the following table:
Table name Employee
===============
emp_id,
emp_name,
emp_city
Table name EmpStatusReport
===================
emp_id,
action
date
I need to write a sql query to get the emp_name, emp_city and the recent date when the user has sent status report over last 30 days. The user has sent a status report if action field in the empStatusReport is set to 'reported'. This table gets filled everytime user sends report.
I tried to the do the following:
select e.emp_name, e.emp_city, esr.date from employee e, EmpStatusReport esr where e.emp_id and esr.emp_id and
/* esr.date = max(esr.date) and esr.date > currentDate - 30 and esr <= currentDate */
I am not able to write a correct login for date part. Any help in this will be highly appreciated.
Thanks!
View 4 Replies
View Related
Mar 23, 2007
Hi all,
I have a table, three records of which look like this:
ID PersonID FirstName LastName PostCode
1 999 Barry White BW13 8GS
2 999 <null> <null> BW13 9GS
3 999 <null> Whites <null>
Both these records refer to the same "person". The records with ID of 2 and 3 represent updates to the record with an ID of 1. The problem is, only the updated data (along with the personID) is represented in records 2 and 3. I need to write query that will return a single record that looks like this:
PersonID FirstName LastName PostCode
999 Barry Whites BW13 9GS
in other words, the most recent information we have for that person.
Does anyone have any ideas? I'd be very grateful as this is proving to be a real pain in the butt!
Kind regards,
macca
View 10 Replies
View Related
Jul 16, 2013
There is a large data table called emp_history on an SQL Server, which contains the employment history of each employee. The significant columns are as follows:
entry_id employee_id start_date position
where entry_id is the primary key and auto-increments.What I need, is to create a query to extract the employee_id and position, based on the most recent record (most recent start_date) for each employee.
View 6 Replies
View Related
Jul 15, 2014
I need to get all customer records with the most recent tDate. A customer should never have duplicate tDate records, as only one record per day is allowed per customer, yet there somehow there are duplicates. Given this, I need to get the record with the Max date and Max ID. the ID column is an auto-incrementing Identity column.Below is the code without the Max ID column logic
SELECT tCustID, MAX(tDate) AS tDate--get MAX tDate records
FROM table1
GROUP BY tCustID
View 2 Replies
View Related
May 27, 2015
I have a query where I am trying to display the most recent information about travelling method of customers using "t.collection_date". I am struggling to get MAX function working in the query.
SELECT P.id, P.forename, P.surname, P.dob, c.postcode, l.code_des, MAX(t.collection_date)
FROM People p,
MOT_HIST t,
lk_mode_of_travel l,
corresp_address c
WHERE p.ID = t.id (+)
AND t.mode_of_travel = l.int_code (+)
AND p.id = c.entity_id (+)
View 6 Replies
View Related
Jun 18, 2015
I simply need to list the most recent value for each employee here... the value at each person's maximum date
Sample Detail Data:
EmpID Date Value
1 1/1/14 27
1 2/12/15 333
2 5/5/15 255
3 5/4/15 110
3 1/1/13 67
3 3/2/14 80
[Code] ....
What is the most efficient way to display the most recent value for each employee ID via MS SQL.?
View 4 Replies
View Related
Apr 15, 2015
Have a table that list item#, date the standard cost went into effect and the standard cost. How do I find the difference in StdCost on the last EffectiveDate and second to last EffectiveDate. 5.59 (01/05/2015) minus 5.81 (09/29/.014) = -.22.
Item# EffectiveDate StdCost
1152 01/01/2009 5.50
1152 09/29/2014 5.81
1152 04/04/2011 5.56
[code]....
View 2 Replies
View Related
Apr 7, 2008
Hi,
We're running a Sage CRM install with a SQL Server 2000 database at the back end. We're using the Sage web services API for updating data and a JDBC connection to retrieve data as it's so much quicker.
If I retrieve a record using the JDBC connection and then try and update the same record through the web services, the query times out as if the record is locked for updates. Has anyone experienced anything similar or know what I'm doing wrong? If I just use DriverManager.getConnection() to establish the connection instead of the datasource, and then continue with the same code I don't get these record locking problems. Please find more details below.
Thanks,
Sarah
The JDBC provider for the datasource is a WebSphere embedded ConnectJDBC for SQL Server DataSource, using an implementation type of 'connection pool datasource'. We are using a container managed J2C authentication alias for logging on.
This is running on a Websphere Application Server v6.1.
Code snippet - getting the record thru JDBC:
DataSource wsDataSource = serviceLocator.getDataSource("jdbc/dsSQLServer");
Connection wsCon = wsDataSource.getConnection();
// wsCon.setAutoCommit(false); //have tried with and without this flag - same results
Statements stmt = wsCon.createStatement();
String sql = "SELECT * FROM Person where personID = 12345";
ResultSet rs = stmt.executeQuery(sql);
if(rs.next()){
System.out.println(rs.getString("lastName"));
}
if (rs != null){
rs.close();
}
if (stmt != null) {
stmt.close();
}
if (wsCon != null) {
wsCon.close();
}
View 1 Replies
View Related
Feb 1, 2007
How to Get previous record thru sql query
For the example
my table:
1 usera item1 1.00 01/02/072 usera item1 2.00 02/02/073 userc item2 3.00 03/02/07
--how to use the query to make them join became like this (get/join with the next record)
1 usera item1 1.00 01/02/07 item1 2.00 02/02/073 userc item2 3.00 03/02/07 null null null
>.<need help ... thanks alot
View 4 Replies
View Related
Oct 29, 2007
Hi I have a query that return set of records between 2 given timestamps. What I want to do is to include one record before and one record after to the result. For example I have the following dataRow Timestamp1 01/01/20072 15/03/20073 17/04/20074 05/05/20075 10/05/20076 11/06/20077 12/07/2007 My query returns row 3 to 5 for example and I want to include row 2 and 6 to the result as well. How can I do that? Is it possible to do it in 1 query?
View 11 Replies
View Related
Apr 15, 2008
I have a table called Customers which holds the customers details including CustID primary key a table called DVDs which holds all the dvd details including DVDID primary key and a table called WishList which holds the CustID and DVDID I want to take the CustID given my the user and display all the dvds in the wishlist with that CustID the code I have now is int CustID = Convert.ToInt16(Session["CustID"]); comm = new SqlCommand("SELECT DVDs.DVDID, dvds.Title, Director, Actor, SUBSTRING(Description,0,200) AS Description, Image FROM DVDs, Customers, WishList WHERE WishList.CustID = @CustID AND WishList.DVDID = DVDs.DVDID", conn); comm.Parameters.Add("@CustID", SqlDbType.Int).Value = CustID; but when i run the query it displays each dvd 5 times not sure why can any one help cheers
View 2 Replies
View Related
Dec 14, 2007
Hello,
I'm a bit new to MS-SQL so i thought maybe you could help me.
This is my prob. I have an Access application that i have upsized to a MS-SQL server. I have a query based on 3 tables: Customers, Companys and Payreminders. When i run this query, i can't add new records or make any changes.
If i only run the query with the tables: companys and payreminders i can add new records and edit them. If i run a query that's based on companys and customers, i can edit and add new records, but when i run the query based on companys and customers i can't add or edit records.
companys, payreminders: Editable
payreminders, companys: Editable
Companys, customers: Non editable
Companys, payreminders, customers: Non editable
Something must go wrong when i use the companys and customers table. Can anybody help or give a suggestion what to do.
Thanks.
View 1 Replies
View Related
