1 SELECT distinct A.EAIndex, 2 A.ChainCode AS ChainCode, 3 A.JobDate, 4 C.BillerName, 5 B.BusinessCode, 6 D.ChainName, 7 A.BillBegDate, 8 A.BillEndDate, 9 A.PostDate, 10 A.BillCount, 11 A.ChAmount, 12 A.PostAmount, 13 A.ProChargeFee, 14 A.BalanceStatus AS BalanceStatus, 15 B.BillerInfoCode AS BillerInfoCode , 16 CONVERT(varchar(10), A.BalanceDate, 112)BalanceDate, 17 A.AdjustDate, 18 C.BillerCode , 19 (a.ChAmount- a.ProChargeFee) AS Fee, 20 E.EABillerCode, E.RelAdjustDate 21 FROM ZT_EAccount A 22 Inner Join ZT_BillerInfo B On Right('00000'+Rtrim(Ltrim(A.BillerCode)),5) = Right('00000'+Rtrim(Ltrim(B.BillerInfoCode)),5) 23 Inner Join ZT_Biller C ON B.ParentCode = C.BillerCode 24 Inner Join ZT_Chain D On A.ChainCode = D.ChainCode 25 Inner Join ZT_EAccountAdjust E ON a.EAIndex=E.EAIndex and a.BillerCode=E.BusCode 26 Where A.JobDate BETWEEN '20071001' AND '20071005' AND C.CompanyCode='533' In line 13 I want to add a Query to make sure if ZT_BillerInfo.Rmflag = 1, if it's =1 then ProChargeFee =0if ZT_BillerInfo.RmFlag =0 , then ProChargeFee = a.ProChargeFee.I add this line �Case B.RmFlag = '1' then 0 else A.ProChargeFee 】instead of Line 13 (A.ProChargeFee)but I execute Sql I got error message on the line I have jsut modified..can you please help me to know why and how to correct it? thank you very much
DECLARE @fullname nvarchar(50) SET @fullname = (SELECT (OriginalName + ContentType) AS Name FROM Files_Dyn) INSERT INTO Files_Dyn(FullName) VALUES (@fullname) where username = 'user_admin' ...what is the wrong with this query..it is giving 'Incorrect syntax near the keyword 'where'. Please correct me! thanks in advance!
I’ve got a table called tblApplicant_Details with the following fields - Applicant_ID, Application_ID, Net_Income, Loans.
In this table I’ve got a list of people and their income details (Net_Income) and expenses (loans). In some cases there will be 2 applicants with the same application_ID.
What I need to do is select one applicant (Applicant_ID) per application (Application_ID). In the case of 2 applicants for an application, I need to select the person with the highest income (net_income - loans), if both of the applicants have the same income I want the one with the lowest Applicant_ID and if only one person applies then that person.
Below is the code I’ve been using. I’ve noticed that its not always selecting an applicant for each application. I know it’s also very long for what I am trying to do but I was hoping someone would be able to tell me how I can fix it and tidy it up a bit.
SELECT Application_ID, MIN(Applicant_ID) AS Applicant_ID FROM (SELECT DERIVEDTBL.Application_ID, dbo.tblAPPLICANT_DETAILS.Applicant_ID FROM (SELECT MAX(APPLICANT.Net_Income - APPLICANT.Loans) AS Income, APPLICATION.Application_ID FROM dbo.tblAPPLICANT_DETAILS APPLICANT INNER JOIN dbo.tblAPPLICATION_DETAILS APPLICATION ON APPLICANT.Application_ID = APPLICATION.Application_ID GROUP BY APPLICATION.Application_ID) DERIVEDTBL INNER JOIN dbo.tblAPPLICANT_DETAILS ON DERIVEDTBL.Application_ID = dbo.tblAPPLICANT_DETAILS.Application_ID AND DERIVEDTBL.Income = dbo.tblAPPLICANT_DETAILS.Net_Income - Loans) DERIVEDTBL GROUP BY Application_ID
select min(dbo.FS_ItemInventory.Bin) from (SELECT MIN(dbo.FS_LotTrace.LotNumber),dbo.FS_ItemInventory.Bin FROM dbo.FS_LotTrace RIGHT OUTER JOIN dbo.FS_MOHeader AS h INNER JOIN dbo.FS_MOLine AS l ON l.MOHeaderKey = h.MOHeaderKey INNER JOIN dbo.FS_Item AS i ON i.ItemKey = l.ItemKey INNER JOIN dbo.FS_MOLineData ON l.MOLineKey = dbo.FS_MOLineData.MOLineKey LEFT OUTER JOIN dbo.FS_DemandSupply AS ds ON l.MOLineKey = ds.TopLevelDemandSupplyKey LEFT OUTER JOIN dbo.FS_ItemInventory RIGHT OUTER JOIN dbo.FS_Item AS di ON dbo.FS_ItemInventory.ItemKey = di.ItemKey on ds.DemandItemKey = di.ItemKey on dbo.FS_LotTrace.LotTraceKey = dbo.FS_ItemInventory.LotTraceKey where (dbo.FS_ItemInventory.InventoryCategory!='H' or dbo.FS_ItemInventory.InventoryCategory is null) group by di.ItemNumber,dbo.FS_ItemInventory.Bin)
select min(dbo.FS_ItemInventory.Bin) from (SELECT MIN(dbo.FS_LotTrace.LotNumber),dbo.FS_ItemInventory.Bin FROM dbo.FS_LotTrace RIGHT OUTER JOIN dbo.FS_MOHeader AS h INNER JOIN dbo.FS_MOLine AS l ON l.MOHeaderKey = h.MOHeaderKey INNER JOIN dbo.FS_Item AS i ON i.ItemKey = l.ItemKey INNER JOIN dbo.FS_MOLineData ON l.MOLineKey = dbo.FS_MOLineData.MOLineKey LEFT OUTER JOIN dbo.FS_DemandSupply AS ds ON l.MOLineKey = ds.TopLevelDemandSupplyKey LEFT OUTER JOIN dbo.FS_ItemInventory RIGHT OUTER JOIN dbo.FS_Item AS di ON dbo.FS_ItemInventory.ItemKey = di.ItemKey on ds.DemandItemKey = di.ItemKey on dbo.FS_LotTrace.LotTraceKey = dbo.FS_ItemInventory.LotTraceKey where (dbo.FS_ItemInventory.InventoryCategory!='H' or dbo.FS_ItemInventory.InventoryCategory is null) group by di.ItemNumber,dbo.FS_ItemInventory.Bin)
I am new at SQL and am using SQL server express edition and im a bit stuck! I am using ASP.NET and C# in my website which is using sql database back end.
String SQLroom = "SELECT DISTINCT RoomName FROM Room INNER JOIN RoomCalendar ON Room.RoomID = RoomCalendar.RoomID WHERE Capacity = '" + reqCapacity + "' " + " AND NOT ('" + newRoomEnd + "' <= roomStartDateTime OR '" + newRoomStart + "' >= roomEndDateTime) AND (OHP = '" + ohpYesNo + "' AND AV = '" + avYesNo + "') ";
This is my SQL string... what it is trying to do is:
find the room where the capacity is the reqcapacity entered by user and the startdatetime and enddatetime entered by the user are not present in the table for that room capacity and then look at whether the user requires OHP or AV facilities, which are stored in the database as either yes or no values. The problem i am having is with the condition in the sql query... because the user may require an OHP and not AV, but then the room returned "`could" have AV facilities, as it wouldnt make a difference to them if it was there or not, basically, the yes condition has to be satisfied.
Not sure whether i should be using AND, or OR? or a combination.
Hi, I am using SqlCacheDependency with the query notifications of SQL server 2005. It is working nicely with the dbo.owner account but not with my web user account, so I am thinking something is wrong with the permissions. After searching around, it seems that the main permissions to enable are these: GRANT SUBSCRIBE QUERY NOTIFICATIONS TO theAccount GRANT RECEIVE ON QueryNotificationErrorsQueue TO theAccount GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to theAccount GRANT SELECT TO theAccount.
I enabled these and it still doesn't work. When I change my table, my cache is not getting invalidations. Does anyone know what could be going on? Or perhaps how can I trace the problem and get some clues? thanks so much, -tajmahal
-- Get the new Customer Identifier, return as OUTPUT param SELECT @NoteID = @@IDENTITY
-- Insert new notes for all the users that the note pertains to, in this case this will be by the assigned -- users. IF @FK_UserIDList IS NOT NULL EXECUTE spInsertNotesByAssignedUsers @NoteID, @FK_UserIDList
-- Insert New Address record -- Retrieve Address reference into @AddressId -- EXEC spInsertForUserNote -- @FK_UserID, --@NoteID, -- @BeenRead -- @Fax, -- @PKId, -- @AddressId OUTPUT
COMMIT TRANSACTION
-------------------------------------------------- GO
ok can someone tell me why i get two different answers for the same query. (looking for last day of month for a given date)
SELECT DATEADD(ms, - 3, DATEADD(mm, DATEDIFF(m, 0, CAST('12/20/2006' AS datetime)) + 1, 0)) AS Expr1 FROM testsupplierSCNCR I am getting the result of 01/01/2007
"Error: 8624, Severity: 16, State: 1 Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services."
I have traced this to an insert statement that executes as part of a stored procedure.
INSERT INTO ledger (journal__id, account__id,account_recv_info__id,amount)
There is also an auto-increment column called id. There are FK contraints on all of the columns ending in "__id". I have found that if I remove the contraint on account__id the procedure will execute without error. None of the other constraints seem to make a difference. Of course I don't want to remove this key because it is important to the database integrity and should not be causing problems, but apparently it confuses the optimizer.
Also, the strange thing is that I can get the procedure to execute without error when I run it directly through management studio, but I receive the error when executing from .NET code or anything using ODBC (Access).
Hey, i've written a query to search a database dependant on variables chosen by user etc etc. Opened up a new sqldatasource, entered the query shown below and went on to the test query page. Entered some test variables, everything works as it should do. Try to get it to show in a datagrid on a webpage - nothing. No data shows. SELECT dbo.DERIVATIVES.DERIVATIVE_ID, count(*) AS Matches FROM dbo.MAKES INNER JOIN dbo.MODELS ON dbo.MAKES.MAKE_ID = dbo.MODELS.MAKE_ID INNER JOIN dbo.DERIVATIVES ON dbo.MODELS.MODEL_ID = dbo.DERIVATIVES.MODEL_ID INNER JOIN dbo.[VALUES] ON dbo.DERIVATIVES.DERIVATIVE_ID = dbo.[VALUES].DERIVATIVE_ID INNER JOIN dbo.ATTRIBUTES ON dbo.[VALUES].ATTRIBUTE_ID = dbo.ATTRIBUTES.ATTRIBUTE_ID WHERE ((ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID1 and (@VAL1 is null or VALUE = @VAL1)) or (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID2 and (@VAL2 is null or VALUE = @VAL2)) or (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID3 and (@VAL3 is null or VALUE = @VAL3)) or (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID4 and (@VAL4 is null or VALUE = @VAL4)) ) GROUP BY dbo.DERIVATIVES.DERIVATIVE_ID HAVING count(*) >= CASE WHEN @VAL1 IS NOT NULL THEN 1 ELSE 0 END + CASE WHEN @VAL2 IS NOT NULL THEN 1 ELSE 0 END + CASE WHEN @VAL3 IS NOT NULL THEN 1 ELSE 0 END + CASE WHEN @VAL4 IS NOT NULL THEN 1 ELSE 0 END -2 ORDER BY count(*) DESC
Here is the page source
<%@ Page Language="VB" MasterPageFile="~/MasterPage.master" Title="Untitled Page" %> <asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server"> <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:DevConnectionString1 %>" SelectCommand="	SELECT dbo.DERIVATIVES.DERIVATIVE_ID, count(*) AS Matches 	FROM dbo.MAKES INNER JOIN 				 dbo.MODELS ON dbo.MAKES.MAKE_ID = dbo.MODELS.MAKE_ID INNER JOIN 				 dbo.DERIVATIVES ON dbo.MODELS.MODEL_ID = dbo.DERIVATIVES.MODEL_ID INNER JOIN 				 dbo.[VALUES] ON dbo.DERIVATIVES.DERIVATIVE_ID = dbo.[VALUES].DERIVATIVE_ID INNER JOIN 				 dbo.ATTRIBUTES ON dbo.[VALUES].ATTRIBUTE_ID = dbo.ATTRIBUTES.ATTRIBUTE_ID 	WHERE ((ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID1 and (@VAL1 is null or VALUE = @VAL1)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID2 and (@VAL2 is null or VALUE = @VAL2)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID3 and (@VAL3 is null or VALUE = @VAL3)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID4 and (@VAL4 is null or VALUE = @VAL4)) ) 	GROUP BY dbo.DERIVATIVES.DERIVATIVE_ID 	HAVING count(*) >= CASE WHEN @VAL1 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL2 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL3 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL4 IS NOT NULL THEN 1 ELSE 0 END -2 	ORDER BY count(*) DESC "> <SelectParameters> <asp:ControlParameter ControlID="DropDownList1" Name="ATT_ID1" PropertyName="SelectedValue" /> <asp:ControlParameter ControlID="TextBox1" Name="VAL1" PropertyName="Text" /> <asp:Parameter Name="ATT_ID2" /> <asp:Parameter Name="VAL2" /> <asp:Parameter Name="ATT_ID3" /> <asp:Parameter Name="VAL3" /> <asp:Parameter Name="ATT_ID4" /> <asp:Parameter Name="VAL4" /> </SelectParameters> </asp:SqlDataSource> <asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:DevConnectionString1 %>" SelectCommand="SELECT * FROM [ATTRIBUTES]"></asp:SqlDataSource> <br /> <asp:DropDownList ID="DropDownList1" runat="server" DataSourceID="SqlDataSource2" DataTextField="ATTRIBUTE_NAME" DataValueField="ATTRIBUTE_ID"> </asp:DropDownList> <asp:TextBox ID="TextBox1" runat="server" AutoPostBack="True"></asp:TextBox><br /> <br /> <br /> <asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="DERIVATIVE_ID" DataSourceID="SqlDataSource1"> <Columns> <asp:BoundField DataField="DERIVATIVE_ID" HeaderText="DERIVATIVE_ID" InsertVisible="False" ReadOnly="True" SortExpression="DERIVATIVE_ID" /> <asp:BoundField DataField="Matches" HeaderText="Matches" ReadOnly="True" SortExpression="Matches" /> </Columns> </asp:GridView> </asp:Content> AFAIK I have configured the source to pick up the dropdownlist value and the textbox value (the text box is autopostback). Am i not submitting the data correctly? (It worked with a simple query...just not with this one). I have tried a stored procedure which works when testing just not when its live on a webpage. Please help!
(Visual Web Devleoper 2005 Express and SQL Server Management Studio Express)
However, as you can see, the original select query is run twice and joined together.What I was hoping for is this to be done in the original query without the need to duplicate the original query.
I'm trying to find the command to open up an odbc conection inside sql2005 express. I only have ues of an odbc connector, we're conection to remedy. We will eventually be using stored procedures to extract the data we need from remedy and doing additional data crunching. I'm a foxpro programmer so once I get the correct syntax for making the odbc connector I shold be ok. Also I need a really good advanced book on sql2005. The type of book that would have my odbc answer. I've spent all morning trying to find this information and was unable to.
Thanks in advance
Daniel Buchanan.
If this was the wrong forum to post this on, please move this question to the correct one. I need this answer soon.
We have a issue with a MDS server that have been over us for a couple of days, the original error msg from SQL Server Engine is the one "The query processor could not produce a query plan" but the ones we get on the Excel-Addin are "Sequece contains no elements" or "The value cannot be null" T
• Using Microsoft SQL Server 2012 (SP1) - 11.0.3393.0 (X64) for 6months on this server without issues
• Two weeks ago we started to have 2 errors: "Sequence Contains No Elements" | "The Value Cannot Be Null"
• We are using the last version of Excel Add-in
• We try to reinstall the MDS feature
• If I backup/restore MDS database to other server it works
• We updated to SQL 2012 SP2 + CU4 but the error persisted ...
Looking at the MDSTraceLog we are routed to the this msg
SQL Error Debug Info: Number: 8624, Message: Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services., Server: bbdvsql03inst01, Proc: udpMetadataEntityGetDetailsXML, Line: 28
At line 28 udpMetadataEntityGetDetailsXML is calling udfMetadataEntityGetDetailsXML … and here is where we stopped
** Error found when try to get data from a entity using Excel add-in ** =================================== Sequence contains no elements ------------------------------ Program Location: Â Â at Microsoft.MasterDataServices.AsyncEssentials.AsyncResultBase.EndInvoke() Â Â at Microsoft.MasterDataServices.ExcelAddInCore.AsyncProviderBase`1.EndOperation(IAsyncResult ar)
how do I get the variables in the cursor, set statement, to NOT update the temp table with the value of the variable ? I want it to pull a date, not the column name stored in the variable...
create table #temptable (columname varchar(150), columnheader varchar(150), earliestdate varchar(120), mostrecentdate varchar(120)) insert into #temptable SELECT ColumnName, headername, '', '' FROM eddsdbo.[ArtifactViewField] WHERE ItemListType = 'DateTime' AND ArtifactTypeID = 10 --column name declare @cname varchar(30)
-- The 3rd query uses an incorrect column name in a sub-query and succeeds but rows are incorrectly qualified. This is very DANGEROUS!!! -- The issue exists is in 2008 R2, 2012 and 2014 and is "By Design"
set nocount on go if object_id('tempdb.dbo.#t1') IS NOT NULL drop table #t1 if object_id('tempdb.dbo
[code]....
This succeeds when the invalid column name is a valid column name in the outer query. So in this situation the sub-query would fail when run by itself but succeed with an incorrectly applied filter when run as a sub-query. The danger here is that if a SQL Server user runs DML in a production database with such a sub-query which then the results are likely not the expected results with potentially unintended actions applied against the data. how many SQL Server users have had incorrectly applied DML or incorrect query results and don't even know it....?
For each customer, I want to add all of their telephone numbers to a different column. That is, multiple columns (depending on the number of telephone numbers) for each customer/row. How can I achieve that?
I want my output to be
CUSTOMER ID, FIRST NAME, LAST NAME, TEL1, TEL2, TEL3, ... etc
Each 'Tel' will relate to a one or more records in the PHONES table that is linked back to the customer.
do i need to nest a query in RS if i want a calculated column to be compared against a multi value variable? It looks like coding WHERE calcd name in (@variable) violates SQL syntax. My select looked like
SELECT ... ,CASE enddate WHEN null then 1 else 0 END calcd name FROM... WHERE ... and calcd name in (@variable)
When viewing an estimated query plan for a stored procedure with multiple query statements, two things stand out to me and I wanted to get confirmation if I'm correct.
1. Under <ParameterList><ColumnReference... does the xml attribute "ParameterCompiledValue" represent the value used when the query plan was generated?
2. Does each query statement that makes up the execution plan for the stored procedure have it's own execution plan? And meaning the stored procedure is made up of multiple query plans that could have been generated at a different time to another part of that stored procedure?
FROM [Order Details] OD, Orders O, Products P, Categories C
WHERE OD.OrderID = O.OrderID
AND OD.ProductID = P.ProductID
AND P.CategoryID = C.CategoryID
AND C.CategoryName = @CategoryName
AND SUBSTRING(CONVERT(nvarchar(22), O.OrderDate, 111), 1, 4) = @OrdYear
GROUP BY ProductName
ORDER BY ProductName
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// From an ADO.NET 2.0 book, I copied the code of ConnectionPoolingForm to my VB 2005 Express. The following is part of the code:
Imports System.Collections.Generic
Imports System.ComponentModel
Imports System.Drawing
Imports System.Text
Imports System.Windows.Forms
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.Common
Imports System.Diagnostics
Public Class ConnectionPoolingForm
Dim _ProviderFactory As DbProviderFactory = SqlClientFactory.Instance
Public Sub New()
' This call is required by the Windows Form Designer.
InitializeComponent()
' Add any initialization after the InitializeComponent() call.
'Force app to be available for SqlClient perf counting
Using cn As New SqlConnection()
End Using
InitializeMinSize()
InitializePerfCounters()
End Sub
Sub InitializeMinSize()
Me.MinimumSize = Me.Size
End Sub
Dim _SelectedConnection As DbConnection = Nothing
Sub lstConnections_SelectedIndexChanged(ByVal sender As Object, ByVal e As EventArgs) Handles lstConnections.SelectedIndexChanged
End Sub /////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// I executed the code successfully and I got a box which asked for "Enter the query string". I typed in the following: EXEC dbo.SalesByCategory @Seafood. I got the following box: Query attempt failed. Must declare the scalar variable "@Seafood". I am learning how to enter the string for the "SQL query programed in the subQuery_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnQuery.Click" (see the code statements listed above). Please help and tell me what I missed and what I should put into the query string to get the information of the "Seafood" category out.
I have two tables .. in one (containing user data, lets call it u).The important fields are:u.userName, u.userID (uniqueidentifier) and u.workgroupID (uniqueidentifier)The second table (w) has fieldsw.delegateID (uniqueidentifier), w.workgroupID (uniqueidentifier) The SP takes the delegateID and I want to gather all the people from table u where any of the workgroupID's for that delegate match in w. one delegateID may be tied to multiple workgroupID's. I know I can create a temporary table (@wgs) and do a: INSERT INTO @wgs SELECT workgroupID from w WHERE delegateID = @delegateIDthat creates a result set with all the workgroupID's .. this may be one, none or multipleI then want to get all u.userName, u.userID FROM u WHERE u.workgroupIDThis query works on an individual workgroupID (using another temp table, @users to aggregate the results was my thought, so that's included) INSERT INTO @users SELECT u.userName,u.userID FROM tableU u LEFT JOIN tableW w ON w.workgroupID = u.workgroupID WHERE u.workgroupID = @workGroupIDI'm trying to avoid looping or using a CURSOR for the performance hit (had to kick the development server after one of the cursor attempts yesterday)Essentially what I'm after is: SELECT u.userName,u.userID FROM tableU u LEFT JOIN tableW w ON w.workgroupID = u.workgroupID WHERE u.workgroupID = (SELECT workgroupID from w WHERE delegateID = @delegateID) ... but that syntax does not work and I haven't found another work around yet.TIA!
When I run the following query from Query Analyzer in SQL Serer 2005, I get a message back that says. Command(s) completed successfully. What I really need it to do is to display the results of the query. Does anyone know how to do this? declare @SniierId as uniqueidentifierset @SniierId = '85555560-AD5D-430C-9B97-FB0AC3C7DA1F'declare @SniierAlias as nvarchar(50)declare @AlwaysShowEditButton as bitdeclare @SniierName as nvarchar (128)/* Check access for Sniier */SELECT TOP 1 @SniierName = Sniiers.SniierName, @SniierAlias = Sniiers.SniierAlias, @AlwaysShowEditButton = Sniiers.AlwaysShowEditButtonFROM SniiersWHERE Sniiers.SniierId=@SniierId
I am trying to run queries against any of the user tables in my MS SQL 7.0 database. I get a message the Query Designer encountered a query error. We have tried rebooting the SQL Server and I am still getting these messages. Also, the SQL error logs look fine - all database maintenance are running successfully including the DBCCs which show no errors. Any help would be greatly appreciated as we are to go into production in a few days.
How to optimize the following Stored procedure running on MSSQL server 2000 sp4 :
CREATE PROCEDURE proc1 @Franchise ObjectId , @dtmStart DATETIME , @dtmEnd DATETIME AS BEGIN
SET NOCOUNT ON
SELECT p.Product , c.Currency , c.Minor , a.ACDef , e.Event , t.Dec , count(1) "Count" , sum(Amount) "Total" FROM tb_Event t JOIN tb_Prod p ON ( t.ProdId = p.ProdId ) JOIN tb_ACDef a ON ( t.ACDefId = a.ACDefId ) JOIN tb_Curr c ON ( t.CurrId = c.CurrId ) JOIN tb_Event e ON ( t.EventId = e.EventId ) JOIN tb_Setl s ON ( s.BUId = t.BUId and s.SetlD = t.SetlD ) WHERE Fran = @Franchise AND t.CDate >= @dtmStart AND t.CDate <= @dtmEnd AND s.Status = 1 GROUP BY p.Product , c.Currency , c.Minor , a.ACDef , e.Event , t.Dec
I am able to run a query which runs FAst in QA but slow in theapplication.It takes about 16 m in QA but 1000 ms on theApplication.What I wanted to know is why would the query take a longtime in the application when it runs fast on SQL server?How should we try debugging it?Ajay
Hi there. I have occasional sincronization error.-XSUBSYSTEM Merge -XSERVER MYSERVER -XCMDLINE 0 -XCancelEventHandle 000006E0 2006-12-22 14:55:00.833 Connecting to Subscriber 'Subscriber01' 2006-12-22 14:55:00.895 Connecting to Distributor 'Publisher01' 2006-12-22 14:55:02.974 Initializing 2006-12-22 14:55:03.083 Connecting to Publisher 'Publisher01' 2006-12-22 14:55:06.005 Retrieving publication information 2006-12-22 14:55:06.130 Retrieving subscription information. 2006-12-22 15:00:07.222 The merge process failed to execute a query because the query timed out. If this failure continues, increase the query timeout for the process. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write. 2006-12-22 15:00:07.456 Error converting data type nvarchar to numeric. 2006-12-22 15:00:07.800 Category:SQLSERVER Source: Subscriber01 Number: 8114 Message: Error converting data type nvarchar to numeric.
After manual syncronization it goes under control.
Could anybody explain the relationship between converting error and timed out query?
If this is poor connection's problem how can I increase the query timeout for the process?
