Query To Display Max Values For Each ID

Jun 5, 2015

I have table that contains below data

Date                              ID            
Message
2015-05-29 7:00:00      AOOze            abc
2015-05-29 7:05:00      AOOze            start
2015-05-29 7:10:00      AOOze            pqy
2015-05-29 7:15:00      AOOze            stop
2015-05-29 7:20:00      AOOze            lmn     

[code]....

and so on following the series for every set of different ID with 5 entries.I need to Find Maximum interval time for each ID and for condition in given message (between Start and Stop)For example, in above table

-For ID AOOze, in message "start" is logged at 7:05 and stop and 7:15, so interval is 10 mins
-For ID LaOze, in message "start" is logged at 7:30 and stop and 7:45, so interval is 15 mins

I am looking for a sql query that will return in below format

ID     MAX interval
AOOze   15
LaOze   10

View 15 Replies


ADVERTISEMENT

T-SQL (SS2K8) :: Query To Display Different Values From Same Column In Same Table?

Sep 18, 2015

I have a table with a column AttributeNumber and a column AttributeValue. The data is like this:

OrderNo. AttributeNumber AttributeValue
1.-Order_1 2001 A
2.-Order_1 2002 B
3.-Order_1 2003 C
4.-Order_2 2001 A
5.-Order_2 2002 B
6.-Order_2 2003 C

So the logic is as follows:

I need to display in my query the values are coming from Order_1, means AttributreValues coming from AttibuteNumbers: 2001,2002,2003...and Order_2 the same thing.

Not sure how to create my Select here since the values are in the same table

View 2 Replies View Related

Transact SQL :: Query To Display Avg Values For Each Timestamp And Count Of Timestamp

Jun 23, 2015

date        time         s-sitename TimeTaken(Seconds)
6/8/2015 10:56:26 TestSite 100
6/8/2015 10:56:26 TestSite 500
6/8/2015 10:56:26 TestSite 800
6/9/2015 11:56:26 TestSite 700
6/9/2015 11:56:26 TestSite 200
6/12/2015 12:56:26 TestSite 700

I have a table with above values, I am looking for a sql query to find AvgTimeTaken at different time stamps and total count of each time stamp

Output
date        time         s-sitename TimeTaken(Seconds) Count_of_Request
6/8/2015 10:56:26 TestSite 1400                  3
6/9/2015 11:56:26 TestSite 900                   2
6/12/2015 12:56:26 TestSite 700                   1

View 5 Replies View Related

T-SQL (SS2K8) :: Create Union View To Display Current Values From Table A And All Historical Values From Table B

May 6, 2014

I have 2 identical tables one contains current settings, the other contains all historical settings.I could create a union view to display the current values from table A and all historical values from table B, butthat would also require a Variable to hold the tblid for both select statements.

Q. Can this be done with one joined or conditional select statement?

DECLARE @tblid int = 501
SELECT 1,2,3,4,'CurrentSetting'
FROM TableA ta
WHERE tblid = @tblid
UNION
SELECT 1,2,3,4,'PreviosSetting'
FROM Tableb tb
WHERE tblid = @tblid

View 9 Replies View Related

Display Of Variable Values

Sep 23, 2004

Hello Experts:

I want to access the values coming from the table but my code is just printing the varibale name.

e.g. It is printing right now

@lev0
@lev1
@lev2
@lev3
@lev4

but infact in variable @lev1, the actual value from table is [prodcut]. the value in varibale @lev1 is [category].

Can you pl. help me?

--- My code

Declare

@lev0 varchar(50),
@lev1 varchar(50),
@lev2 varchar(50),
@lev3 varchar(50),
@lev4 varchar(50),
@stmnt varchar(2000),
@counter int,
@st varchar(50)

Select @lev0=Dimnsion, @Lev1= Lev1, @Lev2= Lev2, @Lev3= Lev3, @lev4= lev4 from dbo.Lookup where dimnsion = '[Product]'
Set @counter = 0

while @counter < 5
begin
set @st = '@lev'+cast(@counter as varchar(50))
print @st
set @counter= @counter+1

end

-------

Thanks

View 1 Replies View Related

Pick And Display TOP 3 Values

May 18, 2014

I have the below data with two columns (Posting Date and Pond Crop, construct an SQL where i will pick and display only the TOP 3 Posting date of EACH Pond Crop. I only attached less data but in reality there are lots of Ponds and posting date in this table.

Table Name : Weekly Harvest

Fields:
1. Posting Date
2. PondCrop

Desired Output:

Posting Date PondCrop
2011-12-12 00:00:00.00001PA01-15
2011-12-19 00:00:00.00001PA01-15
2011-12-26 00:00:00.00001PA01-15
2012-03-19 00:00:00.00001PA01-16
2012-03-20 00:00:00.00001PA01-16
2012-03-26 00:00:00.00001PA01-16

Raw Data
Posting Date PondCrop
2011-11-21 00:00:00.00001PA01-15
2011-11-28 00:00:00.00001PA01-15
2011-12-02 00:00:00.00001PA01-15
2011-12-05 00:00:00.00001PA01-15

[Code] ....

View 7 Replies View Related

Display Minimum Of Two Values

Apr 13, 2015

I want the minimum of two values to be display like below without using the case

MIN(3.00,4.00)

output:

3.00

View 2 Replies View Related

Row Values Display In Columns

Jun 5, 2015

One Table have 2 Columns.

1.Order_number
2.PSON NUmber

In Table Contains 6 rows with 2 order_numbers and different PSON Number.I want Order Number,PSON1,PSON2,PSON3,PSON4 and its Values

Ex:--Order_number    PSON NUmber
             1                    ONT10
             1                    ONT11
              1                   ONT12
              2                   ONT13
               2                   ONT14

I want   data :-      Order_number    PSON1          PSON2        PSON3
                                  1                     ONT10      ONT11       ONT12
                                   2                      ONT13     ONT14       Null

View 3 Replies View Related

Display Null Values

Jul 17, 2007

Hello,



I'm facing a problem in my reporting.

I have a Customer table where is record various events like CustomerEventId, DateTime, StatusId, StatusTime, GroupId, ...

I also have a status table (Id, Description) and a group table (Id, Description).



I want to create a report where for a selected date range (From ... To ...) i can see (grouped by date) all status's the customer

went in. The possible status are :

Id Description

-------------------------------------

1 status 1

2 status 2

3 status 3

4 status 4



My query looks something like this :



SELECT CustomerEventId, DateTime, CONVERT(varchar, DateTime), 103) AS DATEVAL, StatusId,

status.description as StatusDescription, StatusTime, GroupId, group.Description as GroupDescription

From Customers inner join status on customers.StatusId = status.id

inner join group on customers.GroupId = group.id

Group By CustomerEventId, DateTime, StatusId, status.description, StatusTime, GroupId, group.Description



My reports has 3 parameters (From date, To date, Group)

In my report i have a table with two groups : GroupByDate (grouped on DATEVAL) and GroupByStatus



now my problem : let's say i have values for statusid 1,2 and 4

then my report will only display those 3 status.

How can i display the status where there is no data for :

now it shows :

DATEVAL Occurrences Time

01/07/2007

Status 1 15 125

Status 2 25 366

Status 4 8 66

I would like it to show:

DATEVAL Occurrences Time

01/07/2007

Status 1 15 125

Status 2 25 366

Status 3 0 0

Status 4 8 66



Anybody (i hope i have provide enough details ...)



Vinnie

View 1 Replies View Related

Display Null Values

Apr 17, 2007

Hi,



I have the following problem.

I have created different tables in my database with descriptions in from other tables (example : a table named errors with errorid and errordescription as fields in it)

In a report i want to display the total nr of errors during a certain period for a certain department.

i have created that report with a list (by department). in this list i have a table where i group my errors.

until here all ok. when i display my report it shows all the errors.

but what it doesn't show is all the errors who have value 0 (or errors that didn't occur during that period i defined)



how can i display all my errors, even if they did not occur (0 times)



Greetings

vinnie

View 3 Replies View Related

How To Display The Values From Two Different Columns (was RS Question)

Jan 3, 2008

Does somebody know how do you get a column in Reporting Services to display the values from two different columns? I don't mean a concat, but the result of the two columns.

This has been a headache for 2 days now.

Thanks!!

View 3 Replies View Related

T-SQL (SS2K8) :: Display Values Up To 1 Decimal Without Function?

Sep 11, 2014

I am having values as below:

99.87
99.96
8.67

And my output should be as:

99.8
99.9
8.6

How can I do this

View 9 Replies View Related

Display Custom Values In Select Statement

May 8, 2008

Hi,
I have a table called emp, having 2 field name & sex

values are:
name sex
a 1
b 2
c 1

now i want to display the values in above table as like below...
name sex
a Male
b Female
c Male


How to do that...?

View 11 Replies View Related

NUL L Date Values In Report Builder Display As...

Apr 13, 2007

Null date values within a table in SQL Server are displays as (12/30/1899) by Report Builder. Does anyone know how to display the null value as blank?

Thanks in advance

View 1 Replies View Related

Display Null Values As 0 On Line Chart

May 16, 2008

I have a report I'm writing and have got a problem that has stumped me.



The data the report is based in is in this format:



Date Type

1/1/08 A

1/3/08 B

3/1/08 C

3/5/08 B

3/10/08 A

3/12/08 C

3/20/08 A





Management wants a report showing a line chart that summarizes the data by Month and by Type. So, there are 2 series depending on the Type and data values are based on the count of each Type. So, in the example above the x-axis group would be month, the values would be count(Type) and there would be 2 series €“ Series 1. A, B and Series 2. C



I€™ve defined the x-axis to be Month(Fields!DateOccured.Value). However, they want the x-axis to show every month for the entire year not just what is in the database. So, I defined the x-axis to have a scale of 1 to 12 and the major interval is set to 1. This displays 1 through 12 on the x-axis.



The problem is when there is no data (null) for a particular month. Instead of showing 0, the line chart does not plot anything and the line is drawn to the next displayed point. So, for example on the data above the line chart would plot:

January

Series 1 €“ Qty. 2 Series 2 €“ Qty. 0

February

Null

March

Series 1 €“ Qty. 3 Series 2 €“ Qty. 2



The line chart would draw a line from January to March skipping February. I need to display the null values as 0 and not null indicating no occurrences for the month rather than no data present.



Thanks!


View 11 Replies View Related

Display Flag For OrderType Cycle Values

Aug 9, 2015

I have a table with EquipmentNumber, OrderType, BreakdownIndicator and RowID columns and below are the values for one equipmentnumber,

EuipmentNumber OrderType BreakdownIndicator RowId Flag
145812 PM04 1 Yes
145812 PM07 2 Yes
145812 PM07 3 Yes
145812 PM04 4 Yes
145812 PM07 5
145812 PM07 X 6
  145812 PM07 7
  145812 PM04 8 Yes
145812 PM04 9 Yes
145812 PM04 10 Yes

I need to display the 'Flag' column in the result set as mentioned above to identify the cycle values without breakdown indicator values. Here is the logic for this,

1. Need to set the flag 'Yes' for the cycle values PM04 to PM04 in the OrderType and if there is any breakdownindicator value 'X' then we can not consider that cycle for Flag.

View 12 Replies View Related

To Display Two Values In Combobox But In Database Will Store Only One Value Out Of That

Jan 24, 2008



hi friends
i am using visual studio 2005. i need one combo box which will display two values. one is "Designation" i.e.("clerk,accountant,manager,officer,shopkeeper) and another "Designation ID" i.e.(1,2,3,4,5 and respectively) i made table of "Designation Master" in sql server 2000 including field of "Designation ID, Designation". manually i am inserting id and designation in that table.
what i want exactly i have one customer form which contain a "combobox" for "Designation" column i achieved "Designation ID" and "Designation" in that combo box also but when i will go for save i want that i will store only "Designation ID" i don't want to store "Designation" in my "Designation" column which is in "Customer table" i am attaching code which store "Designation ID" and "Designation" in customer table but i want only "Designation ID" only
bold line which is difficult for me to inserting only "designationId" in customer table.




Inventory_Master.cntData.Open()

cmdstr = "Select DesigID,Designation from Designation_Master"

cmd = New SqlCommand(cmdstr, Inventory_Master.cntData)

cdrCustomer = cmd.ExecuteReader()

If cdrCustomer.HasRows = True Then

While cdrCustomer.Read()

cmddesig = cdrCustomer.Item(0).ToString.PadLeft(1) + cdrCustomer.Item(1).ToString.PadLeft(25)

cbodesignation.Items.Add(cmddesig)

End While

Else

End If

Inventory_Master.cntData.Close()



Inventory_Master.cntData.Open()

cmd = New SqlCommand("insert CUSTOMER(Membership_No,Member_Initial,Member_Name,Member_Birthdate,Gender,Res_Telno,Mobile_No,Res_Addr1,Res_Addr2,Res_City,Res_Pincode,Landmark,Company_Name,Comp_Addr1,Comp_Addr2,Comp_Telno,Comp_City,Comp_Pincode,Designation,Credit_Limit,Income_Mthly,Email_ID,Note) values (@Membership_No,@Member_Initial,@Member_Name,@Member_Birthdate,@Gender,@Res_Telno,@Mobile_No,@Res_Addr1,@Res_Addr2,@Res_City,@Res_Pincode,@Landmark,@Company_Name,@Comp_Addr1,@Comp_Addr2,@Comp_Telno,@Comp_City,@Comp_Pincode,@Designation,Convert(money,@creditlimit),@Income_Mthly,@Email_ID,@Note)", Inventory_Master.cntData)

cmd.Parameters.AddWithValue("@Membership_No", txtmebno.Text)

cmd.Parameters.AddWithValue("@Member_Initial", cbomebname.Text)

cmd.Parameters.AddWithValue("@Member_Name", txtmebname.Text)

cmd.Parameters.AddWithValue("@Member_Birthdate", dtime.Value)

cmd.Parameters.AddWithValue("@Gender", cbogender.Text)

cmd.Parameters.AddWithValue("@Res_Telno", txttelno.Text)

cmd.Parameters.AddWithValue("@Mobile_No", txtmobileno.Text)

cmd.Parameters.AddWithValue("@Res_Addr1", txtresaddr1.Text)

cmd.Parameters.AddWithValue("@Res_Addr2", txtresaddr2.Text)

cmd.Parameters.AddWithValue("@Res_City", txtrescity.Text)

cmd.Parameters.AddWithValue("@Res_Pincode", txtrespin.Text)

cmd.Parameters.AddWithValue("@Landmark", txtlandmark.Text)

cmd.Parameters.AddWithValue("@Company_Name", txtcompname.Text)

cmd.Parameters.AddWithValue("@Comp_Addr1", txtcompaddr1.Text)

cmd.Parameters.AddWithValue("@Comp_Addr2", txtcompaddr2.Text)

cmd.Parameters.AddWithValue("@Comp_Telno", txtcomptelno.Text)

cmd.Parameters.AddWithValue("@Comp_City", txtcompcity.Text)

cmd.Parameters.AddWithValue("@Comp_Pincode", txtcomppin.Text)

cmd.Parameters.AddWithValue("@Designation", cbodesignation.Text.PadLeft(1, CChar(CStr(1)))) [ help me for inserting designation in this line]

cmd.Parameters.AddWithValue("@creditlimit", txtcreditlimit.Text)

cmd.Parameters.AddWithValue("@Income_Mthly", txtincomemthly.Text)

cmd.Parameters.AddWithValue("@Email_ID", txtemailid.Text)

cmd.Parameters.AddWithValue("@Note", rtxtNote.Text)

cmd.ExecuteNonQuery()

Inventory_Master.cntData.Close()

MsgBox("RECORD SAVED")


View 1 Replies View Related

SQL Server 2008 :: Display All Months Even If Values Are NULL

May 13, 2015

I am stuck on a query where I need to display all the month year values even if the corresponding count_booking values are NULL. The requirement is to display the 13 month year period from current date.

For e.g. if the date exists in the current month then starting from May 15 go all the way back to Apr 14.

My current query works in terms of displaying all the 13 months if the count_booking values exist for all the months. However, if some months are missing the values then those months don't show up.how to display all the months even if the values are NULL ? Query below:

SELECT COUNT(m.BOOKING_ID) AS count_booking, LEFT(DATENAME(MONTH, m.CREATE_DT), 3) + ' ' + RIGHT('00' + CAST(YEAR(m.CREATE_DT) AS VARCHAR), 2)
AS month_name
FROM MG_BOOKING AS m
WHERE (m.CREATE_DT >= DATEADD(m, - 13, GETDATE()))

[code]...

View 8 Replies View Related

Reporting Services :: Display Only Certain Values In Pie And Graph Chart

Sep 3, 2015

I have a table that contains some data. 

LabelName
LabelValue

TotalForRetire
10337

dummy1
0

TotalForRelatives
5850

dummy2
0

TotalForDisability
7337

TotalForOrange
23

I have a pie chart and a bar chart.

In the pie chart I want to plot only TotalForRetire and TotalForDisability and TotalForOrange

In the bar chart I want to plot only TotalForRetire,dummy1,TotalForRelatives.

Also, here I want the horizontal axis not to show the label  for dummy1 as the value is 0. How can i do that for each chart?

View 2 Replies View Related

Reporting Services :: Display Values By Color Group

May 25, 2015

I am new to SSRS. I created a reporting services with 3 groups. I would like to know how to create different colors for each group so that all my values displayed by color group ?.

View 4 Replies View Related

Display Column Names And Its Values Programatically From The Dataset

Apr 18, 2008

Hi.

In my report, I need to display column names (and its values) from my dataset, which uses the stored procedure and within it use the PIVOT statement. I cannot use the matrix control in report since I need to add another static column to the right of the matrix, but since that cannot be done ni SQL SSRS 2005, I need to PIVOT it through stored procedure. The parameter passed to stored procedure is the year and it is used for pivot. The statement looks like this:

@sql = 'SELECT * FROM (SELECT YearId, SchoolId, ReportText, OutputValue_Text from AggregateTable) AS AGAM
PIVOT (MIN(OutputValue_Text) FOR YearId IN ([' + @YearId + '])) PVT'

EXEC(@sql)

So, since the years passed as parameters can change, I cannot hard-code it as column in my report, so I need to programatically display column names and values from my dataset, something like dataSet.Tables[0].Columns[].ColumnName; I have tried with writing the code, but I do not have much experience with it and I have not been very successful. Can someone help me with the code?

Thanks

View 2 Replies View Related

Reporting Services :: Display Only Two Values Before Decimal Points

Sep 24, 2015

In my report I am having one calculation filed, in that field I want to display only two values before decimal point.

For example, if I am having calculation field value as 3456.54, I need to display as 35.54 or 34.54.

View 3 Replies View Related

Get All The Matching Values In ColB And Display It Against ColA As Comma Seperated In The Same Row

Nov 6, 2007



Hi all sql gurus,

I have a table that has product name and submissionID and some other columns. I am really concerned about these two columns. My task is to get all the submissionIDs for a particular product name and display SubmissionIDs seperated by commas against each product name .
The tables below might give a better idea
current scenario:
Product Name SubmissionID columnC Column D
AAA 123
AAA 456
BBB 111
ccc 121
AAA 789
Expected result:
Product Name SubmissionID columnC Column D
AAA 123,456,789
BBB 111
CCC 121
Any suggestions/pointers would be highly appreciated.

View 5 Replies View Related

Power Pivot :: Selected Report Filter Values Display In A Cell

Oct 28, 2015

I have a power pivot with 2 multi valued report filters   student_branch & blood_group. These report filters are used to fetch the data set that contain below result set

student_branch               blood_group           count

Everything works fine. But, what i am looking for , is there any way to show the what are all the report filters that are selected currently by , separated in a separate cell ? below is the image for output reference.

View 2 Replies View Related

Easy SQL Question. How To Display Query Results In Query Analyzer

Feb 12, 2008

When I run the following query from Query Analyzer in SQL Serer 2005, I get a message back that says.
Command(s) completed successfully.
What I really need it to do is to display the results of the query. Does anyone know how to do this?
declare     @SniierId as   uniqueidentifierset @SniierId = '85555560-AD5D-430C-9B97-FB0AC3C7DA1F'declare    @SniierAlias  as nvarchar(50)declare    @AlwaysShowEditButton  as bitdeclare     @SniierName  as  nvarchar (128)/* Check access for Sniier */SELECT TOP 1       @SniierName      = Sniiers.SniierName,        @SniierAlias    = Sniiers.SniierAlias,        @AlwaysShowEditButton = Sniiers.AlwaysShowEditButtonFROM SniiersWHERE Sniiers.SniierId=@SniierId

View 3 Replies View Related

Re-display Result Set Without Re-running Query In Query Analyzer?

Apr 9, 2006

I hope I am not asking about something that has been done before, but Ihave searched and cannot find an answer. What I am trying to do is torun a query, and then perform some logic on the rowcount and thenpossibly display the result of the query. I know it can be done withADO, but I need to do it in Query Analyzer. The query looks like this:select Varfrom DBwhere SomeCriteriaif @@Rowcount = 0select 'n/a'else if @@Rowcount = 1select -- this is the part where I need to redisplay the resultfrom the above queryelse if @@Rowcount > 1-- do something elseThe reason that I want to do it without re-running the query is that Iwant to minimize impact on the DB, and the reason that I can't useanother program is that I do not have a develpment environment where Ineed to run the queries. I would select the data into a temp table, butagain, I am concerned about impacting the DB. Any suggestions would begreatly appreciated. I am really hoping there is something as simple as@@resultset, or something to that effect.

View 6 Replies View Related

How To Display Multiple Values On Report Page From A Multi-value Report Param

Nov 5, 2007

How do I display multiple parameter values on report page from a multi-value report parameter. For example, I have a report parameter where users can select multiple attendance codes and I want them displayed at the top of the report after it's run.

Currently, only the first value is showing on the report.

Thanks.

View 1 Replies View Related

How Do I Write A Query To Display Top 9 Plus Others

Feb 12, 2007

I have query that return statuses and their totals, the data looks like:
StatusCode     Total----------    ---------A              100PS             50SI1            9SI2            8etc...
The query returns over 30 totals, but I only want the top 9 totals plus others (the rest of the totals combined) .
How do I go about this query?
StatusCode     Total----------    ---------A              100PS             50SI1            19SI2            18SI3            9SI4            8PS1            6PS2            6PS3            6Others         99 
 Also, have it work for queries that have 9 or less totals?
 
 
 
 
 
 
 
 

View 7 Replies View Related

SQL Query - How To Display Row Two And Onwards?

Sep 26, 2007

Hi,
I have this query:
Dim strSQL As String = "SELECT Ticketreply.Status, TicketReply.ReplyID, TicketReply.AssignedTo, TicketReply.ReplyName, TicketReply.Reply, TicketReply.Attachment, TicketReply.LastUpdated, TicketReply.Priority FROM TicketReply INNER JOIN TicketThread ON TicketThread.TicketID = @TicketID WHERE (TicketReply.TicketID = @TicketID) ORDER BY TicketReply.LastUpdated"
How in the gridview do I display all the results bar the first record?
It does this at the moment:
First
Second
Third
I want it to display like this:
Second
Third
So it misses the first row.
Hopefully easy for you Pro's!
 Any help appreciated.
Cheers, Ricky

View 1 Replies View Related

Is There A Way To Display This Query In 1 Result Set?

Feb 15, 2006

I am trying to count the number of Part that is repaired and those that is not repaired, is there a way to combine the following into one result set instead of returning 2? The bold line is the only condition that's different between this 2 query.
I want to display these fields: date_complete, part_categoryid, part_model, repaired, not_repaired
/* parts being repaired */select DATEADD(d,DATEDIFF(d,1,tblAuditPartStatus.auditpartstatus_datecreated),0) as date_complete, part_categoryid, part_model, count(DISTINCT part_id) as repaired from  tblPtSingapore INNER JOIN tblAuditPartStatus ON tblPtSingapore.part_Id = tblAuditPartStatus.auditpartstatus_partidwhere (tblAuditPartStatus.auditpartstatus_status = N'COMPLETE')and part_replaced = 0and (part_flag_nff = 0 and part_flag_ntf = 0 and part_flag_beyondrepair = 0)group by DATEADD(d,DATEDIFF(d,1,tblAuditPartStatus.auditpartstatus_datecreated),0), part_categoryid,part_modelorder by part_model, DATEADD(d,DATEDIFF(d,1,tblAuditPartStatus.auditpartstatus_datecreated),0)
/* parts completed but not being repaired */select DATEADD(d,DATEDIFF(d,1,tblAuditPartStatus.auditpartstatus_datecreated),0) as date_complete, part_categoryid, part_model, count(DISTINCT part_id) as not_repaired from  tblPtSingapore INNER JOIN tblAuditPartStatus ON tblPtSingapore.part_Id = tblAuditPartStatus.auditpartstatus_partidwhere (tblAuditPartStatus.auditpartstatus_status = N'COMPLETE')and part_replaced = 0and (part_flag_nff = 1 or part_flag_ntf = 1 or part_flag_beyondrepair = 1)group by DATEADD(d,DATEDIFF(d,1,tblAuditPartStatus.auditpartstatus_datecreated),0), part_categoryid, part_modelorder by part_model, DATEADD(d,DATEDIFF(d,1,tblAuditPartStatus.auditpartstatus_datecreated),0)

View 2 Replies View Related

Query To Display Sum In Different Ways

May 24, 2014

I have I rather complex query and need to display a Sum in different ways. Now I'm wondering if the performance improves if you nest the queries in the described way. To me it looks, as if the sum just has to be calculated once?

select SUM(tiempo) as time_minutes,
CONVERT(varchar(5), dateadd (minute,sum(tiempo),'1900-1-1 0:00'), 114) as time_hours,
SUM(time)* 0.95 as time_discount
from table

Select tiempo as time_minutes,
CONVERT(varchar(5), dateadd (minute,tiempo,'1900-1-1 0:00'), 114) as time_hours,
tiempo * 0.95 as time_discount
From (
Select Sum(tiempo) as tiempo
from table)a

View 2 Replies View Related

Create Query To Display Month Between?

May 3, 2008

Hello everybody,I want to ask how to create query use the solve the problem of this..Example : I want to display the month january between february... Sorry if my english is not good...Thank you... 

View 3 Replies View Related

Display Query Results Horizontally One ID/row

Feb 6, 2003

I have a table where the ID column is a forign key as shown below:

select * from Joel_Table

IDID_Value
1One
2Two
3Three
1Four
2Five
3Six
1Seven
2Eight
3Nine
1Ten

Now, I order the result set based on the ID column:

select ID, ID_Value from Joel_Table
group by ID, ID_Value
order by ID, ID_Value

IDID_Value
1Four
1One
1Seven
1Ten
2Eight
2Five
2Two
3Nine
3Six
3Three

I want though to order the result set as one ID per row:
ID ID_Value ID_Value ID_Value ID_Value
1 Four One SevenTen
2 Eight Five Two
3 Nine Six Three

What is the best way of accomplishing this task?

Thank you much in advance -

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved