I have a query using the sys.dm_exec_query_stats that returns the last exec of all proc calls for the last day and execution times.
Is there a way to get all the executions and not just the last w/o using a db trace?
I am attempting to see if an application is calling a particular stored proc. i have the Profiler setup to only display the login and it is. I have all items set to display under Stored Procedures, but I can't see names of procedures in the Text Data.
View 4 Replies View RelatedI need to develope a stored procedure (eventually called by a trigger) that creates a record in an event table for all the descendants of a drawing. There are 3 tables involved as example tables shown below:
DwgTable
DwgID (integer)--drawing record identifier
PrntDwgID (integer)--parent drawing record identifier (a previously defined DwgID from this table)
DwgEventTable
DwgEventID (integer)--record identifier
DwgID (integer)--value from DwgTable
EventID (integer)--value from EventTable
EventTable
EventID
There are other fields in two of the tables and only the fields shown in the DwgEventTable, but only the fields shown are required for adding a record in the DwgEventTable for a new event in the EventTable. The problem is identifying all the DwgID's of the descendant of the DwgID where the EventID occurred. There may be 0 to N descendants in 0 to N generations. I need to add a record for the original DwgID and all the descendant DwgID's in the DwgEventTable for the event identified by EventID.
I could do this from the client side, but a better place would be from the server side. I need some clue(s) on how to start coding a recursive stored procedure in SQL Server 2005. From what I have read, you cannot create a managed code procedure that appends or updates records--if managed code can add/modify records then I can do the above with managed code procedure.
Any Suggestions?
Hi.
How can I get the messages sent by the server while I'm executing a stored procedure via the JDBC driver?
I need to get my own debug messages (done through the print() function)
and also standard server messages (such as "x row(s) affected" or
results from SET STATISTICS TIME ON). Is this possible?
Many thanks.
Carlos
hi ng,i am newbie to sqlserver and my problem seems simple, but i didn't findinformation about it:How can i display theRETURN @xvalue of a stored procedure in the sql analyzer of the sqlserver?thanks a lot,d
View 2 Replies View Related
Hi all,
I have a SP that return a dataset and I was thinking to execute that SP inside of other SP then catch the dataset to put into a variable or put into a temp table. What I know is you can not use recordset on output and input parameter in SP correct me if im wrong. I'm just wondering if I there is a work around in this scenario.
Thanks and have a nice day to all.
I tried to display return value from stored procedure output parameter in Query Analyzer, but I do not know how to do it. Below is my stored procedure:
CREATE PROCEDURE UserLogin
(
@Email nvarchar(100),
@Password nvarchar(50),
@UserName nvarchar(100) OUTPUT
)
AS
SELECT @UserName = Name FROM Users
WHERE Email = @Email AND Password = @Password
GO
If I run the query in Query Analyzer directly, I can display @UserName:
DECLARE @UserName as nvarchar(100)
SELECT @UserName = Name FROM Users
WHERE Email = @Email AND Password = @Password
Select @UserName
But how can I display @UserName if I call stored procedure:
exec UserLogin 'email', 'password', ''
I believed it return int, right?
Thanks in advance for help.
Hi all,
I have a problem while i create a proxy account.The situation is like this...There is a user who has an login in to the server.He has a stored procedure which calls some on the SSIS packages and XP_cmdshell...so this stored procedure basically load some data in to the tables .So for the login in order to execute the stored procedure as he is not a Sys admin I have created a proxy account in my account as Iam an SA and then in the proxies and in principals I selected his login name and this way I have created a credential and a proxy account.
Now the problem is if he logins with his id and password and try to execute the stored procedure it gives an error message
Server: Msg 15153, Level 16, State 1, Procedure xp_cmdshell, Line 1
The xp_cmdshell proxy account information cannot be retrieved or is invalid. Verify that the '##xp_cmdshell_proxy_account##' credential exists and contains valid information.
....so this mean the login is not able to see the proxy account.So what I did is I created a job and then in the job owner tab I have selected his login and then created a step with the type operating system (CmdExec) as I need to just execute the stored procedure and used the proxy account that I have created.
so I gave the command -- exec <stored procedure> --.
But this job fails and gives the error message as
[298] SQLServer Error: 536, Invalid length parameter passed to the SUBSTRING function. [SQLSTATE 42000]....
So now ....first My question is am I doing in a right way....if its right then why Iam not able to execute the stored procedure.
If there is any other way through which I can execute the stored procedure using a proxy account for the logins who are not sys admins....please do let me know.....
Thanks
Raja.V
Hey guys, i need to find out how can i add order items under a Purchase Order number.
My table relationship is PurchaseOrder ->PurchaseOrderItem.
below is a Stored Procedure that i have wrote in creating a PO:
CREATE PROC spCreatePO (@SupplierID SmallInt, @date datetime, @POno SmallInt OUTPUT)
AS
BEGIN
INSERT INTO PurchaseOrder (PurchaseOrderDate, SupplierID) VALUES(@date, @SupplierID)
END
SET @POno = @@IDENTITY
RETURN
However, how do i make it that it will automatically adds item under the POno being gernerated? can i use a trigger so that whenever a Insert for PO is success, it automaticallys proceed to adding the items into the table PurcahseOrderItem?
CREATE TRIGGER trgInsertPOItem
ON PurchaseOrderItem
FOR INSERT
AS
BEGIN
'What do i entered???'
END
RETURN
help is needed asap! thanks!
I have a package that I have been attempting to return a error code after the stored procedure executes, otherwise the package works great.
I call the stored procedure from a Execute SQL Task (execute Marketing_extract_history_load_test ?, ? OUTPUT)
The sql task rowset is set to NONE. It is a OLEB connection.
I have two parameters mapped:
tablename input varchar 0 (this variable is set earlier in a foreach loop) ADO.
returnvalue output long 1
I set the breakpoint and see the values change, but I have a OnFailure conditon set if it returns a failure. The failure is ignored and the package completes. No quite what I wanted.
The first part of the sp is below and I set the value @i and return.
CREATE procedure [dbo].[Marketing_extract_history_load_TEST]
@table_name varchar(200),
@i int output
as
Why is it not capturing and setting the error and execute my OnFailure code? I have tried setting one of my parameter mappings to returnvalue with no success.
I would like to do a SELECT query and have the return set ordered by the order which the rows are physically stored in the table.
Specifically, something like:
Select a.*, b.normalizedColumn
FROM table a
JOIN table b
(a.id = b.id)
ORDER BY "Physical order of table a rows"
I believe if there is a clustered index on the table, I can just order by that index and it SHOULD be the physical order of the table.
(I would like to see this as I am generating mock data and would like to verify the "randomness" of the data inserted).
Hi All,
I am using sql server 2005. I stuck out in a strange problem.
I am using view in my stored procedure, when I run the stored procedure some of the rows get skipped out means if select query have to return 10 rows then it is returning 5 rows or any other but not all, also the records displyaing is randomly coming, some time it is displaying reords 12345 next time 5678, other time 2468.
But if I run seperately the querys written in SP then it returns all the rows. Please give me solution why it is happening like this.
There are indexes in the tables.
Once I shrink the database and rebuild the indexes, from then this problem is happening. I have rebuild the indexes several time, also updated the statistics but nothing improving.
But nothing is improving
Seems like I'm stealing all the threads here, : But I need to learn :) I have a StoredProcedure that needs to return values that other StoredProcedures return.Rather than have my DataAccess layer access the DB multiple times, I would like to call One stored Procedure, and have that stored procedure call the others to get the information I need. I think this way would be more efficient than accessing the DB multiple times. One of my SP is:SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, S.Name AS 'StatusName', S.ItemDetailStatusID, S.InProgress as 'StatusInProgress', S.Color AS 'StatusColor',T.[Name] AS 'TypeName', T.Prefix, T.Name AS 'ItemDetailTypeName', T.ItemDetailTypeID FROM [Item].ItemDetails I INNER JOIN Item.ItemDetailStatus S ON I.ItemDetailStatusID = S.ItemDetailStatusID INNER JOIN [Item].ItemDetailTypes T ON I.ItemDetailTypeID = T.ItemDetailTypeID However, I already have StoredProcedures that return the exact same data from the ItemDetailStatus table and ItemDetailTypes table.Would it be better to do it above, and have more code to change when a new column/field is added, or more checks, or do something like:(This is not propper SQL) SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, EXEC [Item].ItemDetailStatusInfo I.ItemDetailStatusID, EXEC [Item].ItemDetailTypeInfo I.ItemDetailTypeID FROM [Item].ItemDetails IOr something like that... Any thoughts?
View 3 Replies View RelatedHow do I properly write a CASE statement for the following business logic:
I want three of the following fields to be true in order to return 'Y'.
For example:
If field name 'Accepted' = 1 AND field 'StepNo' = '1' and field 'Visit' = 'V1'
Otherwise, I want it to return 'N'.
I have tried the following code below and it is not working.
, CASE WHEN Accepted = '1' AND StepNo ='1' AND Visit ='V1'
THEN 'Y' ELSE 'N' END AS 'StatusQ (Col N)'
Goal: My request is the retrieve the return result from sp_Test as 8, 2, 4, 1 ,3 (take a look at picture 1) based on the chronological list from User-Defined Table Type dbo.tvf_id.
Problem: When I execute the stored procedure I sp_Test I retrive the list that is from 1 to 8. I don't know how to do it?
Information: I'm using SQL server 2012
create table datatable (id int,
name varchar(100),
email varchar(10),
phone varchar(10),
cellphone varchar(10),
none varchar(10)
);
insert into datatable values
[Code] .....
I didn't want to maintain similar/identical tables in a legacy FoxPro system and another system with SQL Server back end. Both systems are active, but some tables are shared.
Initially I was going to use a Linked Server to the FoxPro to pull the FP data when needed. This works. But, I've come up with what I believe is a better solution. Keep in mind that these tables are largely static - occassional changes, edits.
I will do a 1 time DTS from FP into SQL Server tables.
I then create INSERT and UPDATE triggers within FoxPro.
These triggers fire a stored procedure in FoxPro that establishes a connection to the SQL Server and fire the appropriate stored procedure on SQL Server to CREATE and/or UPDATE the corresponding table there.
In the end - the tables are local to both apps.
If the UPDATES or TRIGGERS fail I write to an error log - and in that rare case - I can manually fix. I could set it up to email me from within FoxPro as well if needed.
Here's the FoxPro and SQL Server code for reference for the Record Insert:
FOXPRO employee.dbf InsertTrigger:
employee_insert_trigger(VAL(Employee.ep_pk),Employ ee.fname,Employee.lname,Employee.email,Employee.us er_login,Employee.phone)
FOXPRO corresponding Stored Procedure:
FUNCTION EMPLOYEE_INSERT_TRIGGER
PARAMETERS wepk,wefname,welname,weemail,WEUSERID,WEPHONE
nhandle=SQLCONNECT('SS_PDITHP3','userid','password ')
IF nhandle<0
m.errclose=.f.
IF !USED("errorlog")
USE tisdata!errorlog IN SELECT(1)
m.errclose=.t.
ENDIF
SELECT errorlog
INSERT INTO errorlog (date, time, program,source,user) ;
values (DATE(), TIME(), 'EMPLOYEE_INSERT_TRIGGER','nhandle<0 PARAMS: '+STR(wepk)+wefname+welname+weemail+WEUSERID+WEPHO NE,GETENV("username"))
IF m.errclose
USE IN errorlog
ENDIF
RETURN
ENDIF
nquery="exec ewo_sp_insertNewEmployee @WEPK ="+STR(wepk)+",@WEFNAME ='"+wefname+"',@WELNAME ='"+welname+"',@WEEMAIL ='"+weemail+"',@WEUSERID ='"+weuserid+"',@WEPHONE='"+wephone+"',@RETCODE =0"
nsucc=SQLEXEC(nhandle,nquery)
SQLDISCONNECT(nhandle)
IF nSucc<0
m.errclose=.f.
IF !USED("errorlog")
USE tisdata!errorlog IN SELECT(1)
m.errclose=.t.
ENDIF
SELECT errorlog
INSERT INTO errorlog (date, time, program,source,user) ;
values (DATE(), TIME(), 'EMPLOYEE_INSERT_TRIGGER','nSucc<0 PARAMS: '+STR(wepk)+wefname+welname+weemail+WEUSERID+WEPHO NE,GETENV("username"))
IF m.errclose
USE IN errorlog
ENDIF
ENDIF
RETURN
SQL SERVER Stored Procedure called from FOXPRO Stored Procedure
CREATE procedure ewo_sp_insertNewEmployee (
@WEPK int,
@WEFNAME char(20),
@WELNAME char(20),
@WEEMAIL char(50),
@WEUSERID char(15),
@WEPHONE char(25),
@RETCODE int OUTPUT
)
AS
insert into WO_EMP (
WE_PK,
WE_FNAME,
WE_LNAME,
WE_EMAIL,
WE_USERID,
WE_PHONE
)
VALUES (
@WEPK,
@WEFNAME,
@WELNAME,
@WEEMAIL,
@WEUSERID,
@WEPHONE
)
IF @@ERROR <> 0
BEGIN
SET @RETCODE=@@ERROR
END
ELSE
BEGIN
-- SUCCESS!!
SET @RETCODE=0
END
return @RETCODE
GO
I have a stored procedure that selects the unique Name of an item from one table.
SELECT DISTINCT ChainName from Chains
For each ChainName, there exists 0 or more StoreNames in the Stores. I want to return the result of this select as the second field in each row of the result set.
SELECT DISTINCT StoreName FROM Stores WHERE Stores.ChainName = ChainName
Each row of the result set returned by the stored procedure would contain:
ChainName, Array of StoreNames (or comma separated strings or whatever)
How can I code a stored procedure to do this?
I am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
Is it possible to have to ORDER BY statements in the same storedprocedure?I am trying to use the same stored procedure for two different pagesbut the data returned needs to sorted DESC on one page and ASC onanother. Below is my SP:CREATE procedure sp_getLeads@p_SortType int,@p_PropID intASSELECT ID, PropID, Name, StatusFROM LeadsWHERE PropID = @p_PropIDIF @p_SortType = '1'(ORDER BY DateCreated DESC)ELSEIF @p_SortType = '2'(ORDER BY DateCreated ASC)ENDRETURN 1GOCan someone tell me what I am doing wrong?
View 1 Replies View RelatedI am trying to create a stored procedure that is sent a column name and orders by the column name. conn = New SqlConnection(SQLserver)SQL = New SqlCommand("SearchECN", conn)
SQL.CommandType = CommandType.StoredProcedure
SQL.Parameters.Add("@Search", SqlDbType.Variant)SQL.Parameters.Add("@Sort", SqlDbType.Variant)
SQL.Parameters(0).Value = Search.Text
SQL.Parameters(1).Value = "ECN.ECN"
SQL.Connection.Open()
GVECN.DataSource = SQL.ExecuteReader()
GVECN.DataBind()
SQL.Connection.Close()
SQL.Connection.Dispose()
Stored Procedure
@Search NVARCHAR(MAX),
@Sort NVARCHAR(MAX)
SELECT ECN.ECN, ECN.A, ECN.B FROM ECN WHERE ECN.ECN LIKE @Search OR ECN.A LIKE @Search ORDER BY @Sort
I get the following error
Msg 1008, Level 16, State 1, Line 10
The SELECT item identified by the ORDER BY number 1 contains a variable as part of the expression identifying a column position. Variables are only allowed when ordering by an expression referencing a column name.
Any Ideas
How do you use a variable in the ORDER BY command in a sql statement.
I currently have:
****************************************
CREATE Procedure SS_POList
(
@CompanyID nvarchar(10),
@PO varchar (20) = '%'
)
As
SELECT
SS_Sendback.EndUserPO,
SS_Sendback.PO,
COUNT(SS_Sendback.EndUserPO) as pocount,
SUM(SS_Sendback.Customerprice) as totcost
FROM
SS_Sendback
WHERE
SS_Sendback.EndusercustomerNumber = @CompanyID
AND
SS_Sendback.EnduserPO Like @PO
GROUP BY
SS_Sendback.EndUserPO,
SS_Sendback.PO
ORDER BY
SS_Sendback.PO
GO
*************************************
I changed it to
*************************************
CREATE Procedure SS_POList
(
@CompanyID nvarchar(10),
@PO varchar (20) = '%',
@Order varchar(20)
)
As
SELECT
SS_Sendback.EndUserPO,
SS_Sendback.PO,
COUNT(SS_Sendback.EndUserPO) as pocount,
SUM(SS_Sendback.Customerprice) as totcost
FROM
SS_Sendback
WHERE
SS_Sendback.EndusercustomerNumber = @CompanyID
AND
SS_Sendback.EnduserPO Like @PO
GROUP BY
SS_Sendback.EndUserPO,
SS_Sendback.PO
ORDER BY
@Order
GO
and I receive the following error..
error1008: the select item identified by the Order By number 1 contains a variable as part of the expression identifying a column position. Variables are only allowed when ordering by an expression referencing a column name.
How does it know @order is a position and not a column name... It's a variable. I'm obviously doing something wrong. Can someone help.
Thanks
Hi
I´m newbie using SP, so excuse me if my doubt is stupid!!!
I´m trying to do a SP with like this
create procedure Test
@arg char(10)
as
select * from table
order by @arg
go
when i try to create this i got this error:
The SELECT item identified by the ORDER BY number %d contains a variable as part of the expression identifying a column position. Variables are only allowed when ordering by an expression referencing a column name.
This is possible to do?What i want is the query sorted by the variable i´ve passed(in this case arg).
If someone know how to do this, please tel me.
Thanks.
I am trying to do something similar to the following where I want to perform dynamic ordering on two tables that have been unioned as shown below.
CREATE PROCEDURE procedure_name
@regNum varchar(14),
@sortOrder tinyint = 1
AS
SELECT Filler_OrdNum As 'Accession', RTrim(Obs_Code) As 'Observation', REG As 'Register',
Obs_Date As 'Observation Date'
FROM tblSPG_Header
WHERE
REG = @regNum
UNION
SELECT Filler_OrdNum As 'Accession', RTrim(Obs_Code) As 'Observation', REG As 'Register',
Obs_Date As 'Observation Date'
FROM tblRCH_Header
WHERE
REG = @regNum
ORDER BY Obs_Date DESC
GO
Note that I am only sorting on the Obs_Date column, but I'd like to be able to sort on any column within the selection list. I know that I need to use:
ORDER BY CASE WHEN @sortOrder = 1 THEN Obs_Date END DESC
but I frequently get the following error when I try to do so:
"ORDER BY items must appear in the select list if the statements contain a UNION operator"
If anyone can offer any suggestions, I would appreciate it. Thanks.
I need to create a conditional if or case statement in SQL Server 2000
for a stored procedure. Basically if the value passed in is 1,2 or 3 then
it will order by either NEWID(), a text field or a datetime feild.
Not done much dynamic sql so any help would be appreciated.
Fuzzy
i am creating a Stored Procedure and trying to set the value for the sort column value as a variable which is passed from my c# program. But i get an error..is there a way, where i can specify a dynamic value for the sort column in the order by clause . My Procedure is as follows :-
ALTER PROCEDURE PhoneBook_search @startdate varchar(30), @enddate varchar(30), @sortType varchar(15),
AS
DECLARE @starttime AS varchar(30)
DECLARE @endtime AS varchar(30)
SET @starttime = @startdate + " 00:00"
SET @endtime = @enddate + " 23:59"
SELECT *
FROM phonebook
WHERE (exp_date BETWEEN @starttime AND @endtime order by
@sortType )
Any help is appreciated !!!
I can't figure out why this won't work. I want to use a variable for the 'ORDER BY' in my Stored Procedure.
I use this to order my results by product price or alphabetically from a dropdown menu. I have tried the following, but get the error below.
Code:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER procedure [dbo].[SPResults]
[Code] ....
Code:
Msg 1008, Level 16, State 1, Procedure SPResults, Line 21
The SELECT item identified by the ORDER BY number 1 contains a variable as part of the expression identifying a column position. Variables are only allowed when ordering by an expression referencing a column name. Is this possible to do?
Hello,
I have this stored procedure:
SELECT * from purchase
ORDER BY
CASE @OrderBy
WHEN 'traveller_name' THEN cast(traveller_name as nvarchar(100))
WHEN 'canceled' THEN cast(canceled as bit)
END
the @OrderBy is a nvarchar(100) parameter
traveller_name is an nvarchar(100) field
canceled is a bit field
When I execute the stored procedure it works fine until I execute it sorting by canceled field. After that, I cannot sort it again using the traveller_name field. I get this eror:
Conversion failed when converting the nvarchar value 'Jason' to data type bit.
(Jason is a record in the traveller_name)
Removing the castings and sorting by just the column name does not help.
Any ideas?
Thank you
I've encountered some strange behavior in a recursive procedure I'mwriting for a bill of materials. First let me ask directly if what Ithink is happening is even possible:It seems like the procedure is not following the recursion in serialorder, but in parallel. In other words, after one instance of theprocedure calls itself, it continues executing lines below therecursion before the recursion is done. Is that possible? I lookedfor SQL Server Options that might deal with recursion or threading butI couldn't find anything.Now let me explain what's happening in terms of the BoM. All the rowsI expect are returned, but not in the correct order. Let's assume thefollowing tree:1|-2| |-5| | |-7| | -8| -6| -9|-3| |-10| |-11| | |-13| | -14| | |-15| | |-16| | -17| -12| -18| -19| -20| |-21| -22-4-23|-24-25-26This is stored in table P using MemberID and ParentID fields. Forexample,MemberID ParentID-------- --------1 NULL2 13 14 15 26 2(etc...)Based on how I wrote the recursion (I will provide the procedurebelow), I would expect output when starting from MemberID of 1 to looklike this:MemberID Depth Sort-------- ----- ----2 1 15 2 27 3 38 3 46 2 59 3 6(etc... basically, the line order of the graphical tree above, or acounter-clockwise traverse around the tree)Instead, I get this (I'll provide the whole thing because I don't seea pattern):MemberID Depth Sort-------- ----- ----2 1 15 2 23 1 210 2 37 3 34 1 36 2 39 3 423 2 48 3 411 2 413 3 512 2 524 3 525 3 618 3 614 3 615 4 719 4 726 4 720 5 816 4 817 4 921 6 922 6 10Call me crazy, but it looks like my tree was parsed in the same orderthat a set of dominos arranged in the same shape would topple. Theonly way I could see that happening is if the recursion is non-linear,allowing both children and siblings to be parsed simultaneously. Itwould also explain why my sort counter didn't increment properly, butthe depth counter is always correct.Now here are the procedures. There's also a Qty column, since this isa BoM after all, but I didn't need to mention it for my illustrationof the problem above.CREATE PROC makebom @root bigint---- This would be called by the client to find all the parts andquantities-- under a specific part (@root)--ASSET NOCOUNT ONCREATE TABLE #result (MemberID bigint, Qty bigint, Depth bigint, sortbigint)EXEC bomrecurse @root, 1, 0SET NOCOUNT OFFSELECT MemberID, Qty, Depth, sort FROM #result ORDER BY sortGOCREATE PROC bomrecurse @root bigint, @depthcounter bigint,@sortcounter bigint---- This is the recursive procedure, called once by makebom, butrecalling-- itself until the whole tree is parsed, filling the #result table--ASDECLARE @memberid bigint, @qty bigint, @nextdepth bigintDECLARE children_cursor CURSOR LOCAL FORSELECT MemberID, Qty FROM PWHERE ParentID = @rootORDER BY MemberIDOPEN children_cursorFETCH NEXT FROM children_cursorINTO @memberid, @qtyWHILE @@FETCH_STATUS = 0BEGINSET @sortcounter = @sortcounter + 1INSERT INTO #result VALUES (@memberid, @qty, @depthcounter,@sortcounter)SET @nextdepth = @depthcounter + 1EXEC bomrecurse @memberid, @nextdepth, @sortcounterFETCH NEXT FROM children_cursorINTO @memberid, @qtyENDCLOSE children_cursorDEALLOCATE children_cursorGOI'm surprised this even worked as well as it did because I'm a newbiewhen it comes to stored procedures and I put this together fromexamples I found around this group, online and in the T-SQL Help. Sofeel free to comment on other aspects of my code or approach, but I'mmost interested in understanding the behavior of this recursion.
View 4 Replies View RelatedHello, I created a DELETE Stored Procedure in SQL 2005. When calling this procedure from my server code (VB.NET in my case) I need to know if the record was deleted or not. How should I do this? Should I make the procedure to return True or False? If yes, how can I do this? My Stored Procedure is as follows (I think it is ok): SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO ALTER PROCEDURE [dbo].[Content_DeleteContent] -- Define the procedure parameters @ContentName NVARCHAR(100), @ContentCulture NVARCHAR(5) AS -- Prevent extra result sets from interfering with SELECT statements. SET NOCOUNT ON; -- Declare and define ContentId DECLARE @ContentId UNIQUEIDENTIFIER; SELECT @ContentId = ContentId FROM dbo.Content WHERE ContentName = @ContentName -- Check if ContentId is Not Null IF @ContentId IS NOT NULL BEGIN -- Check if ContentId is Null IF @ContentCulture IS NULL BEGIN -- Delete all localized contents from dbo.ContentLocalized DELETE FROM dbo.ContentLocalized WHERE ContentId = @ContentId -- Delete content from dbo.Content DELETE FROM dbo.Content WHERE ContentName = @ContentName; END ELSE -- Delete localized content from dbo.ContentLocalized DELETE FROM dbo.ContentLocalized WHERE (ContentID = @ContentID AND ContentCulture = @ContentCulture) END GO Thanks, Miguel
View 7 Replies View RelatedHi guys I know this is a really common question, and I have read loads of replies on it but everything I try does not work. I have written a small stored procedure in SQL server to upload images to a table and return the new ID using scope_identity. I have tested it and it works fine. here it is:******* @siteID numeric(18,0), @imgNum numeric(18,0), @title NVarchar(50), @MIMEtype nchar(10), @imageData varbinary(max)ASBEGINSET NOCOUNT ONdeclare @imageID intINSERT INTO [site_images] ([img_siteID], [img_num], [img_title], [img_MIME], [Img_Data]) VALUES (@siteID, @imgNum, @Title, @MIMEType, @ImageData) SET @imageID = SCOPE_IDENTITY()RETURN @imageIDSET NOCOUNT OFF************If I run this in management studio express it runs fine and returns the ID under 'return value'. The problem I have is trying to actually call that return value in VB. If I try using these lines:Dim returnParam As SqlParameterreturnParam = New SqlParameter("@imageID", SqlDbType.UniqueIdentifier)returnParam.Direction = ParameterDirection.OutputcmdTest.Parameters.Add(returnParam)withcnBKTest.Open()cmdTest.ExecuteNonQuery() imageIDparam = returnParam.value.toStringcnBKTest.Close() I get the error "procedure has too many arguments specified"And if I try to access the return value like this: imageIDparam = cmdTest.Parameters("@return_value").ValueI get the error "@return_value is not contained by this sqlparametercollection" What am I doing wrong? Any help would be greatly appreciated. Robsa
View 3 Replies View RelatedI have written this stored procedure but I get no return value (neither 0 nor 1). What I hope is when the transaction successful, return value 1. If fails, return value 0.1 set @TransactionOk = 0
2
3 BEGIN TRAN
4
5 UPDATE WhiteList_IMEI SET WhiteList_IMEI_Used = 1, Whitelist_IMEI_UsedDate = getdate()
6 WHERE WhiteList_IMEI_Code = @IMEICode_New
7
8 IF @@ERROR <> 0
9 BEGIN
10 ROLLBACK TRAN
11
12 PRINT ('Error. Contact Software Engineer.')
13 RETURN
14 END
15
16 COMMIT TRAN
17 set @TransactionOk = 1
Hi,
I have been trying to this this for quite a while with no joy can someone please tell me the error of my ways. I am trying to add a new record by stored procedure, this I can do, but my problem lies with the returnvalue part of the procedure. I cannot get it to work. When I debug it tells me that the "Specified cast is not valid" see C# code as i comment the line where it errors. I enclose a sample stored procedure and its c# code. Please can someone tell me where I am going wrong? as this is annoying me alot
SQL:create procedure SPUAddVehicleInsert
@VehicleDetailsRegistrationNumber varchar(50),
@VehicleDetailsMake varchar(50),
@VehicleDetailsModel varchar(50),
@NID bigint =null
as
insert into tblvehicledetails
(
VehicleDetailsRegistrationNumber,
VehicleDetailsMake,
VehicleDetailsModel,
)
values
(
@VehicleDetailsRegistrationNumber,
@VehicleDetailsMake,
@VehicleDetailsModel,
);
select @NID = scope_identity();c# code on sqldatasource: protected void dsAddVehicle_Inserted(object sender, SqlDataSourceStatusEventArgs e)
{
Int64 VID = (Int64)e.Command.Parameters["NID"].Value; //errors with specified cast is invalid
Response.Redirect("details.aspx?VID=" + VID.ToString());
}
protected void dsAddVehicle_Inserting(object sender, SqlDataSourceCommandEventArgs e)
{
SqlParameter p = new SqlParameter("NID", SqlDbType.BigInt);
p.Direction= ParameterDirection.ReturnValue;
e.Command.Parameters.Add(p);
}
sql datasource:<asp:SqlDataSource ID="dsAddVehicle" runat="server" ConnectionString="<%$ ConnectionStrings:National %>"
InsertCommand="SPUAddVehicleInsert" InsertCommandType="StoredProcedure" SelectCommand="SPUAddVehicleSelect"
SelectCommandType="StoredProcedure" OnInserted="dsAddVehicle_Inserted" OnInserting="dsAddVehicle_Inserting">
<InsertParameters>
<asp:Parameter Name="VehicleDetailsRegistrationNumber" Type="String" />
<asp:Parameter Name="VehicleDetailsMake" Type="String" />
<asp:Parameter Name="VehicleDetailsModel" Type="String" />
</InsertParameters>
</asp:SqlDataSource>
I have a stored procedure that returns an integer value, declared as:Public Function MyProc(..) As Int32 . . Return <integer>End FunctionI return an integer value, and can do this and get the value returned from the method, as such:declare @rc intexec @rc = dbo.MyProc <params>select @rcThis returns the value; how do I return the value to code and get the value; I've been debugging and that is my problem, I can't get the value to return.Thanks a lot.
View 2 Replies View Related