Hi all. I have the problem on query.
This is my query.
select D.fullname, P.religion, E.empno from pspersonaldata as P
inner join hremployees as E on P.dcno = E.empdcno
inner join psdatacenter as D on D.dcno = E.empdcno
where P.religion in ('Born Again','Baptist', 'Catholic')
How could I make a query that returns a result for either "Born Again, Baptist, or Catholic". The parameter would depend on the input of the user depending on how many religion the user inputed.
If the user inputed Born Again and Baptist, the result is the employees that have a religion of Born Again and Baptist.
Thanks
-Ron-
I am trying to query the Topics in my discussion forum...The Topic contains a "last_poster_id" and a "author_id" I need the username and userid for both "last_poster_id" and "author_id" in the table "aspnet_Users"How do I do this?I would guess I need to use sub select statements. Can someone help me?
I am learning T SQL and SQL queries and have limited VB knowledge, and have a some simple queries to run on a table with parameters, and would like verification of the proposed methodology and suggestions. Simply put, I have a [Transactions] table with columns [Price], [Ticker], [TransDate], [TransType] and calculated columns for [Days] and [Profit]. There are two parameters, [@Dys] (to query a the table for transactions within a certain period[Days = 30] and [@TT] to query only the closed transactions ie... [TransType='C'] I have been studying Stored Procedures and will be writing a Stored Procedure, but need verification if the following will work... Getting the SUM and AVG calcluations for the fields above is not a problem but I need to display SUM and AVG information also for those transactions where [Profit >0] and [Profit <0], which is easy enough by creating a subquery. But the problem is: 1. If I use a SubQuery for [Profit <0] and for [Profit>0], can I create an alias for [Count(*)] (to get a row or transaction count for each, and then divide that into the Total [Count(*)] alias for the Transactions table to get a value for % profitable or Probability (% total Profitable trades versus % total Unprofitable trades)? 2. Or, do I need to create either temporary tables or views to have 3 distinct tables (1 table for Transactoins and 2 temp or Views for [Profit >0] and [Profit <0])? Any suggestions and advice or examples on how to do this would be appreciated. Craig
Hey there! I'm not sure how to explain this but here goes... I'm a bit stuck, a new project that's come about "requires" me to query multiple databases as if they were tables. 1 Oracle database which stores information on our staff (this database is a part of some MIS software and can't be changed in any way) 1 SQL Server 2005 database which stores information on staff sickness Basically say theres 1 table in each database Oracle DB People
Person_Code Forename Surname SQL DB Sickness
Person_Code Daydate Lets say the query I want to perform is to select all the records from sickness where person code is 22334 and also get their name from the other db, so the output may look like 22334 Dann Rees 01/01/2007 22334 Dann Rees 03/01/2007 22334 Dann Rees 10/02/2007 Now I realise I can write a quick function to pull the information but this is just a basic example. Effectivley what I "need" is to be able to query sickness while sub querying people to get the names, or some kind of pass through query? Please remember this is just a very simple example and the "actual" queries will be far more complicated, for instance finding all the employees of a certain department who is male and was sick in January. All the data for that example is stored in people (oracle) except for the dates which is stores in sick (SQL 2005). Now these are easy enough if they were tables in 1 database....but their not, their tables in 2 databases, and theres nothing I can do to change that :( All help appreciated as this is becoming very urgent. Many thanks Dann (I couldnt post this in the General data access forum for some reason)
Hi all, lets say i have a table as follows id name1 red2 orange3 green and this has s join to another table via the id table2 id event 1 stop2 stop3 start now if i make a view and drop these two tables the jkoin is there but i would liek to report on all names who have a event of "go"but it gives me no results , which is right . but how can i output all the names and in the evnet put a empty SO name eventred emptyorange emptygreen empty thanksrobby
This is probably a simple solution but I'm a bit confused about which flows to use.
I have two databases on different servers that contain the same information but for the appropriate server. I want to retrieve data from each of the servers using a "select" statement.
Would I use a ForLoop and change the connection in a Script Task and then execute the SQL statement? Or can a ForEach Loop be used, but I'm not sure which type of enumerator.
Hello,I am relatively new to doing non-trivial SQL queries.I have to get data out of 8 diff views based on a parameter Name.There is a view having name-ssn pairs. All other views have SSN field.For a person there MAY NOT be data in all the views.I have to populate data into diff tables in a Report from differentviews.I would like to know what is the best way to approach it.So far I was trying an Inner join from the Name-ssn vies to all otherviews based on the SSN and test for the name field with the inputparameter.I am thinking there will be problem of Cross join if I dont have datain all views about a person.Or the best way is to write query for each view and have all of them ina stored procedure ?Any help will be appreciatedThanksBofo
I am trying to query multiple tables that have the same column. They are a supposed to be a unique ID to the product, but not to the database. I have a primary key already set to each othe tables. The tables do not share anything between them, but i would like to search for these IDs in other tables before my insert command is executed. I am writing my code in VB. example of what i am trying to accomplish. Table1 = TVs ID/SKU_ID/Manufacturer 1 87654 Samsung
I want to search for SKU_ID in multiple tables( I think a total of 9 tables). I want to search between tables to catch for the same SKU_IDs. and if it finds it, raise error. I will be able to figure the vb.net portion. I just dont know how to go about the sql query portion. Thanks in advance and appreciate any help. Thanks!
Hi;I am looking for suggestions about how to solve a problem using tsql.I have been asked to create a report concerning 4 tables.Each of the 4 tables is in its own database.The 4 tables are identical in name and structure.I would like to query all 4 of these tables and get the results as ifthey were one table.All suggestions welcome, thanks.Steve
Folks,While I still have some hair left, can someone help me with thisquery?I have a table "TestRunInfo". Amongst other fields there are"TestRunIndex" (Pri Key), "TesterID", "Duration", and "Status".The Status field links to a Status table, which links the index valueto a more meaningful label "Pass", "Fail" etc...As you may have guessed, there is a record for each test that anindividual tester runs, and with that record is a duration, and status(1,2,3 etc).What Im trying to do, is create a datasheet view, with a single rowfor each testerID, summarising that Testers work as follows:TesterID, Total Duration, Count of passed tests, Count of failed testsSo far I have:Select TesterID, sum(Duration), count(Status) FROM TestRunInfo GROUPBY TesterIDBut this of course purely gives the total number of tests run by thatengineer as the count. I need to break it down. Help? Someone?Please?!?!?TIASteve
Hi, all. I have a question about how you would design this. I have to return a list of projects in a stored procedure with a statement like this: SELECT ProjectID, ProjectName FROM PROJECTS; This populates a DropDownList with all possible projects. When the user selects one, I need to find out more information about that project, like this: SELECT a.ProjectID, a.ProjectName, b.OtherStuff FROM PROJECTS a INNER JOIN OTHERSTUFF b on a.ProjectID = b.ProjectID; In the old ASP world, we just filled the ProjectID parameter with NULL if we wanted to return all results, and the stored procedure was set up to dynamically return results based on whether that parameter was NULL or not. I'm looking for a more elegant way to do this. I can use two stored procedures, but I'm not sure what to name them. Obviously, I could call one 'SelectProjects' and the other 'SelectProject', but that just doesn't seem elegant enough. Anyone have any other ideas?
I'm fairly new to SQL and am just setting up a Windows 8 app using an Azure SQL server. The issue I have is looking up a part number supersession and getting the latest number. One part number can have multiple supersessions (ie RTC5756 > STC8572 > STC3765 > STC9150 > STC9191 > SFP500160 ).The data I am supplied monthly has both the superseeded items and the supersession information in both columns and is not easy to decipher - for example:
The newest part number is kept in a separate table - called "source" - which in this instance is SFP500160. I need access to the latest part number but also to the part's previous numbers, due to the fact that some people may still be stocking them as an old part number and for them to search by. Is there an easy and efficient way of doing both a lookup for the supersessions and a join on the two tables to minimize the queries on the database?
Hi, I am trying to build search engin with 11 parameters in 4 different tables in the database. For example: In search.aspx I have 11 textboxes namely nameTextbox, phoneTextbox, nationalityTextbox, ageTextbox etc. And in the result.aspx page I have gridview which post data from the database if the search match. I wrote this stored procedure. P.S please ignore the syntax. @name var(30),
@nationality (30),
@phone int,
etc
as
Select a.UserId, b.UserId, c.UserId FROM Table1 a, Table2 b, Table3 c
WHERE
name LIKE '%' @name '%'
OR nationality LIKE '%' @nationality '%'
OR phone LIKE '%' @phone '%'
etc
But I got an error when I am trying to execute this code because the nulls values so I wrote 1 @name var(30), 2 3 @nationality (30), 4 5 @phone int, 6 7 etc 8 9 as 10 11 12 13 Select a.UserId, b.UserId, c.UserId FROM Table1 a, Table2 b, Table3 c 14 15 WHERE 16 17 name LIKE '%' ISNULL(@name, '') '%' 18 19 OR nationality LIKE '%' ISNULL(@nationality,'') '%' 20 21 OR phone LIKE '%' ISNULL(@phone,'') '%' 22 23 etc 24 25
Also the error still exist. What is the best way to search for multiple parameters in multiple tables ?
Dear Readers,Is it possible, like in Access, to link to tables in other SQL databases that are on the same server? I have a query that I originally had in Access that queered from multiply databases. It did this by having those other tables in the other databases linked to the database that had the query.
hello. I have a database that a client developed that I need to pull data from. it consists of articles that fall into a range of 3 main categories. each article will have up to 7 different subcategories they fall into. I need to be able to sort by main category as well as by subcategory. But when I create the SQL query it gets really messy. I tried using WHERE Cat1= comm OR leg OR and so on, but there are seven categories so this gets very cumbersome and doesn't quite work. Is there a way to create an array or a subquery for this? I am a total newbie, so any help is much appreciated!
I need to pass a parameter to a stored procedure that allows the user to select all store numbers or a combination thereof. The portion that selects all works fine. I am have trouble with the later. My code looks like this:
IF @StartDate IS NULL BEGIN Set @StartDate = GetDate() Set @EndDate = (GetDate ()+90) END Declare @StoreList TABLE ( CenterID int )
-- Get our Centers IF ( @Center = 'ALL' ) or ( @Center IS NULL ) BEGIN INSERT @StoreList SELECT DISTINCT POS_Site_ID FROM LVIGP.dbo.POS40108 (nolock) END ELSE BEGIN
INSERT @StoreList SELECT DISTINCT POS_Site_ID FROM LVIGP.dbo.POS40108 (nolock) WHERE POS_Site_ID = @Center END
the first if statement returns all of the store number like this CenterID 001 002 010 024 057
the second if returns nothing I tried using coalesce but it returns the store number like this: CenterID 001, 002, 010, 024, 057 This does not work with the rest of my program.
Can I create a report that offers users a choice for the parameter. I want to show a sales report based on either Fiscal year or Calender Year. Can I do that with one report that allows an option on which parameter to choose or do I need two reports.
I need to write a stored procedure with 20 parameters as input and it searches in a table . Most of the parameters or NULL , how do I write this procedure without using any dynamic queries.
Ex : To find a customer I have a proc which can accept 20 parameters like CustName, City, State , Phone , Street etc.
Im passing only Custname as parameters and other 19 parameters are NULL.How do I write the WHERE clause ?
Is it possible to have a parameter with one label but multiple values. For example:
Label Value ---------------------------------------------
Machinist (100,200,300)
Is it possible to set up an expression that when the user selects this label it will look for the job codes 100, 200 and 300 and return all employees in those codes?
I am working on SSRS. I need to open a new report from one report when user clicks on some particular summerized count link.
Its a sort of drilled down report. I am not getting how to pass the respected Ids (more than one) to the next report when user clicks on the link in the 1st report. These ids I want to use as a parameter (multiple) in the 2nd report to dump the rows from the database.
I have a report in which one parameter has with multiple selections (List of CheckBoxes). SSRS automatically adds a "Select All" value as the first option. I'm showing a User Type list, but for example, usually the user running the report will be selecting two or three sets of "User Types" (*), then I named those selections and put them in the list also. The list looks like: "Select All" IT Users (*) HR Users (*) Programmers DB Analyst... etc...
What I'm trying to do is that when the user selects "IT Users" (per example), then the options "Programmers" and "DB Analyst" will be checked automatically, because they belong to "IT Users" group.
Im trying to set up a report in visual studio 2005 which uses multiple parameters (6) on which the user can filter to get the information they want.
here is what i want to happen - I've tried to explain as best i can but i dont think i've done a very good job...please ask questions if things need clarifying:
the 6 parameters are - userid, printers, default printer, area, applications, supervisor.
these need to be able to be filtered on any/all/combination of those parameters. parameters are set up and data is accessible, however when i run the report and try and filter on these it only works if all parameters are set to "All" (this is made available through a UNION select statement), or if i individually select a value for each category. if i choose a combination of say userid =myname, printers = myprinter, default=all, area=all etc it will match if ANY of the criteria is matched (including the ALL criteria, therefore it will always display all the values). i need to it work so if i pick the userid and the printer it will only match records containing BOTH the values i select, not either, or if i choose just the area, it will only return those records that contain that department.
Below is the WHERE statement i am currently entering in
WHERE (AllUserData.tp_ListId = '36948548-bfa8-4b25-aff8-b3d1f401dca1') AND (((AllUserData.nvarchar3 LIKE @Area) OR (@Area = 'All')) OR ((AllUserData.nvarchar4 LIKE @Default) OR (@Default = 'All')) OR ((AllUserData.ntext1 LIKE '%' + @Printer + '%') OR (@Printer = 'All')) OR ((AllUserData.ntext2 LIKE '%' + @Application + '%') OR (@Application = 'All')) OR ((@Application = 'All') AND (@Printer = 'All') AND (@Default = 'All') AND (@Area = 'All')))
and here is what Visual Studio automatically translates that into as soon as i execute the script:
WHERE (AllUserData.tp_ListId = '36948548-bfa8-4b25-aff8-b3d1f401dca1') AND (AllUserData.nvarchar3 LIKE @Area) OR (AllUserData.tp_ListId = '36948548-bfa8-4b25-aff8-b3d1f401dca1') AND (@Area = 'All') OR (AllUserData.tp_ListId = '36948548-bfa8-4b25-aff8-b3d1f401dca1') AND (AllUserData.nvarchar4 LIKE @Default) OR (AllUserData.tp_ListId = '36948548-bfa8-4b25-aff8-b3d1f401dca1') AND (@Default = 'All') OR (AllUserData.tp_ListId = '36948548-bfa8-4b25-aff8-b3d1f401dca1') AND (AllUserData.ntext1 LIKE '%' + @Printer + '%') OR (AllUserData.tp_ListId = '36948548-bfa8-4b25-aff8-b3d1f401dca1') AND (@Printer = 'All') OR (AllUserData.tp_ListId = '36948548-bfa8-4b25-aff8-b3d1f401dca1') AND (AllUserData.ntext2 LIKE '%' + @Application + '%') OR (AllUserData.tp_ListId = '36948548-bfa8-4b25-aff8-b3d1f401dca1') AND (@Application = 'All') OR (AllUserData.tp_ListId = '36948548-bfa8-4b25-aff8-b3d1f401dca1') AND (@Area = 'All') AND (@Default = 'All') AND (@Printer = 'All') AND (@Application = 'All')
Note: AllUserData.tp_ListId references a specific row in the database which must be queried to get the correct information. so it must match on that before anything else.
any help structuring the logic i am using or better understanding the way visual studio/sql handles this kind of thing would be fantastic! thanks!
Using a Report Designer of the SQL Server 2008 connecting to an ORACLE database:
- I want to use Parameters filters with multiple Values but i get the error :
"FilterExpression for the data set 'DATAset1' cannot be performed. Cannot compare data of types System.String and System.Object[]. Please Check the Data Type Returned by the FilterExpression"
without the multiple Values it works but don't resolve my problem.
The filter configuration is =Fields!DT_OPERACAO.Value = =Parameters!FLT_Ano_Lectivo.Value
I have a SQL query that goes like this "select * from Product where ProductID in (1,2,3)" How can i create a stored procedure where a single input parameter can take multiple values? Can anyone help me with this?
Hi, I want to create a stored procedure which I can pass multi parameters. This is what I need, I have a gridview which is used for displaying customer info of each agent. However, the number of customers for each agent is different. I will pass customer names as parameters for my stored procedure. Here is a sample, CREATE PROCEDURE [dbo].[display_customer] @agentID varchar(20), @customer1 varchar(20), @customer2 varchar(20), ..... -- Here I do know how many customers for each agent AS SELECT name, city, state, zip FROM rep_customer WHERE agent = @agentID and (name = @customer1 or name = @customer2) Since I can not decide the number of customers for each agent, my question is, can I dynamically pass number of parameters to my above stored procedure? Thanks a lot!
Hi,Hope if someone can help me here. Keep in mind I an fairly new to .NET and SQL and am learning to break my MS Access habit :) I have a web form that is using a SqlDataSource and a FormView control. In addition to this I have 2 text boxes. What I am trying to do is display results in the FormView based on what a user types into one of the Text Boxes (one or the other…Not both)
The SELECT statement in the SqlDataSource looks like this in concept. SELECT Field1, Field2, Field3, Field4FROM dbo.MYTABLEWHERE (Field1 = @Field1) AND (Field2 IS NULL)OR (Field2 = @Field2) AND (Field1 IS NULL)
I have the two text boxes pointing at the parameters (@Field1 and @Field2) so in theory I would expect that when a user populates one of the text boxes and clicks a button to databind the FormView it would display a record matching that criteria…. But it’s not all I get is a blank/missing FormView. I tried different variations on the SQL statement and tried using = '' instead of IS NULL but still the same results. However, if I populate one text box with a value that I know is not in my table and populate the other with a value of which I know exists in my table is…It works.What am I missing?
OK, 1st, I have looked at every article that has come back on a "Stored Procedures" Search on this site, and am more confused than when I started looking for my answer. This is what I need to do: I need to pass a search sentence to a stored procedure, have the stored procedure break up the space delimited string and then do a "like" and "contains" in the WHERE statement, on what was sent to the stored procedure, and then return the results to a gridview for the person to select which item best answers their search. I am just totally lost with using a stored procedure. I have done this in webmatrix when I coded it all into the aspx page, or into the codepage, but I have never done it with a stored procedure on the sql server, never sent a varible to a stored procedure... and am totlaly lost, or just do not understand how to do it. Any help would be great. Thanks in advance. D4D
ALTER PROCEDURE dbo.SP_UpdateFixedRev /* ( @parameter1 int = 5, @parameter2 datatype OUTPUT ) */ ( @Number int, @FixedRev money ) AS BEGIN /* SET NOCOUNT ON */ Update Ticket set FixedRev = @FixedRev where Number = @Number; End
Here is my code:
Dim dbConn As New OleDbConnection Dim dbComm As OleDbCommand dbConn.ConnectionString = connStr 'connStr is class-level vrbl dbConn.Open() dbComm = dbConn.CreateCommand dbComm.Parameters.Add("@Number", OleDbType.Integer).Value = txtDatabaseTicketNo.Text dbComm.Parameters.Add("@FixedRev", OleDbType.Currency).Value = txtFixedRev.Text dbComm.CommandText = "SP_UpdateFixedRev" dbComm.CommandType = CommandType.StoredProcedure dbComm.ExecuteNonQuery() dbConn.Close()
However its not updating my database when I run the app from a button click event.
