I just need something verified.. This has to do with IP's and names. We have a sql failover cluster. So is that 4 names.. One for each local machine, one for the cluster itself and one for the sql portion? I guess my question is can the cluster group and sql have the same name and IP or do they need to be different.
Thanks in advanced.
During the installation of Adding node to a SQL Server failover cluster(On passive node) getting error like.. The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI server to start.We  run the below commands but didn’t get any resolution & got the same above error .
Â
1<sup>st</sup> Method…
1. Open console command (Run->CMD with administrator privileges).Â
2. net stop winmgmtÂ
3. Rename folder %windir%System32WbemRepository to other one, for backup purposes (for example _Repository).Â
4. net start winmgmt
2<sup>nd</sup>Â Method..
1. Disable and stop the WMI service.
a) Command : - sc config winmgmt start= disabled
b. Command : - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â net stop winmgmt
2. Run the following commands.
a). Command: Winmgmt /salvagerepository %windir%System32wbem
b). Command: Â Winmgmt /resetrepository %windir%System32wbem
3. Re-enable the WMI service
Command:Â Â Â Â Â Â Â Â Â sc config winmgmt start= autoÂ
Last command to run after above steps
4. Command:Â Â Â Â mofcomp "%programfiles(x86)%Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof"
File not found Error for above command.
I am in the process of moving databases from a SQL 2005 Standard version to a 2-node 2014 cluster.All of my 2005 databases back up successfully.They all restore without issue except for one database that has a full text catalog. I get this message
Msg 7610, Level 16, State 1, Line 2
Access is denied to "fileStoragedataMSSQLSERVERFullTextCatalog", or the path is invalid.
Msg 3156, Level 16, State 50, Line 2
File 'sysft_FTCatalog' cannot be restored to 'fileStoragedataMSSQLSERVERFullTextCatalog'. Use WITH MOVE to identify a valid location for the file.
Msg 3119, Level 16, State 1, Line 2
Problems were identified while planning for the RESTORE statement. Previous messages provide details.
Msg 3013, Level 16, State 1, Line 2
RESTORE DATABASE is terminating abnormally.
[code]....
I went as far as giving the folder full access to everyone temporarily and received the same error.
I ran the Advanced cluster preparation for a new sql instance on an existing cluster.
Slq Server 2012.
After is completed, it was successful, I realized I specified the wrong Instance Root directory.
Is it possible to remove what the preparation installed? Or is it possible to change the root directory?
Can I build a cluster by adding the cluster service, then the SQL instances, then add the other nodes and their passive SQL instances?I would lean to building the cluster first, the add the SQL instances.
View 4 Replies View RelatedI´ve been reading that SQL Server 2012 Always On is dependent on having a Windows Failover Cluster setup. Is that correct ?
View 6 Replies View RelatedI have following script which i am planning to run to drop all non-clustered primary keys on a database and then created as clustered. I am using someone else's script so don't know how to modify this. Some of primary key columns are used in references in other tables.
is there anyway i can drop the existing primary keys and using their original script then create again as clustered including restoring all foreign and reference keys and unique or no unique.
DECLARE @table NVARCHAR(512), @tablename NVARCHAR(512),
@sql NVARCHAR(MAX), @sql2 NVARCHAR(MAX), @sql3 NVARCHAR(MAX),
@column NVARCHAR(MAX);
DECLARE @indexname NVARCHAR(512);
SELECT name As 'Table'
[Code] ....
can we join a node in a windows cluster which is already in a different cluster?
We have this requirement as we need to setup readable secondary ( always on AG) on the third node.
We are planning to change all IPs of PRODUCTION Failover Cluster Setup. In my cluster setup ... we have 2 Physical Nodes with windows-2008, Roles are MSDTC and SQL-2008R2.
IP change for:
1. Both Nodes(Physical)
2. MSDTC
3. SQL ServerÂ
4. windows ClusterÂ
So Almost... All IPs are going to change.
Im DBA here, I need to take care of SQL cluster and MSDTC. But I haven't performed this activity before.So I'm worrying about Impacts and consequences of this change. steps how should I perform this activity.
Hi all,
We have many tables which have cluster index on column with datatype 'Char(200)'.
Does anyone have script to change cluster index to noncluster for all user tables which have clustered index on a column with 'char(200)' datatype.
Thanks,
Deepak
Wanted to know about difference between cluster and non cluster index with example.
When to use cluster index and non cluster index .
CREATE TABLE [dbo].[Access](
 [AdminID] [int] NOT NULL,
 [FnID] [int] NOT NULL,
 CONSTRAINT [PK_AccessFn] PRIMARY KEY NONCLUSTERED
[Code] ....
why the cluster and non cluster indexed created on the same key?
I am trying to upgrade a SQL Server 6.5(Cluster) to SQL Serevr 7.0 (Cluster)..I already have an intsllation of 7.0(On a Cluster),so this means that 6.5 and sql 7 are on seperate cluster's ,if i try to upgrade from 6.5 Cluster to 7.0 Cluster is asks me to uncluster 6.5 and 7.0 is this correct ,assume i cannot break the cluster then what???.. what is the best way i can achieve this functinality.....
thanks in advance
Jack
I have to implement some logic in a view and I don't know how to do it. Let me outline the logic:
- I'm working with a view where records represent participant activities.
- Some participants can have numerous activities.
- Each activity has a start date and an activity code.
- Only records with activity code 23 or 33 appear in the view currently.
What I need to do is NOT include records where the participant has another activity with code 26 (from another table, the one the current view is derived from) which has the same start date as the activity 23/33 record in the view currently. Also, this should only be implemented if the start date is the first start date (minimum start date for that participant).
Little help?
I've noticed that there are a lot of questions on this forum, but not as many thank you's. I'm far from a DBA (more of a simple, small town, one stop shop), but have learned tons of information from reading your posts. I certainly appreciate everyone's willingness and excitment to contribute to the SQL community. So here's to you...thank you!
Erik
hey guys, how could you get the primary key field of a record you have just inserted into a table?
Many thanks
Hey guys,
How would you copy data between two identical tables residing on two different databases?
So we have table1 on database1 and table2 on database2. I would like to copy the entire contents from table1 to table2.
Muchos gracias
Hi All
What am i doing wrong with this im tired and for the life of me it wont work
Cheers
Phil
if
(Select sum(Unitprice*qtysold) from #DataExport_tmp where recordtype = 'L'group by transref )<> select Totalcost from #DataExport_tmp where recordtype = 'T'
BEGIN
PRINT 'no good'
end
i use windows vista and installed visual net 2005 and sqlserver 2005
but i have some proplem:
my step:
1.open vs net 2005
2.make one project
3.make one button
4.get data->datagridview
5.choose add data source
6.choose new data---> this step then choose microsoft sql server
7.typing servername
8.choose attach a database file and choose browe..
9.link to folder have database(.dbf)
but i have worked them very much but not run for me
i dont know why it is like that
"login faild"or you dont have permission to pen this filecontact the file ower or an administrator to obtain permissio
pls help me i very need for learning
my Y!M: phok28a@yahoo.com
pls contact me and help me
Hi
We are planning to upgrade the SQL Server in our production environment from SQL Server 2000 to SQL Server 2005. This is a 4 Node cluster environment with 3 Databases on 3 Virtual instances. The main requirement is to achieve this with no/minimal downtime.
Could you please suggest or direct me to any documentation for the best practices used to upgrade such an environment?
Thanks
Priyanka
We have (had) an active/active cluster. 2 physical machines,
each running their own instance, clustered together. Node1/Ins1 and Node2/Ins2.
Node2 failed and Ins2 failed over to Node1 as it should. Node2 required that we
rebuild the server (rebuild = reinstall O/S). Now we need to get Node2 back
into the cluster and get Ins2 failed back over to Node2.
Does anyone know, for certain, the correct steps to accomplish this? Obviously,
we could backup everything and completely destroy Ins2 and recreate it on Node2
then rejoin the cluster. But I'm looking for something less destructive.
Is it possible to reinstall SQL, then rejoin the cluster, and then fail Node2
over? Or will there be registry conflictions?
Any help would be appreciated. Also, if you have any links to some official
documentation, that would be great too.
Thanks
What is the parameters for starting & stoping sqlserver 2005 from start/run or from the command prompti tried 'sqlservr' & it didn't work
View 1 Replies View RelatedHey guys... i cant figure this out for the life of me. I have a long T-sql query, and when i enter the string "Rental" into the Listingtype, it says invalid column name "Rental" ... im not looking for the value to be a column, im looking for it to match the value in the ListingType column... here's the query:
(
@StudioINT = NULL,
@Br1INT = NULL,
@Br2INT = NULL,
@Br3INT = NULL,
@Br4INT = NULL,
@OverBr4INT = NULL,
@CondoINT = NULL,
@ListingTypevarchar(10) = NULL,
@WindowAirINT = NULL,
@CentralACINT = NULL,
@BalconyDeckPatioINT = NULL,
@UseOfYardINT = NULL,
@DishwasherINT = NULL,
@WasherDryerINT = NULL,
@FireplaceINT = NULL,
@EIKINT = NULL,
@HardwoodFloorsINT = NULL,
@BroadbandNetINT = NULL,
@TVINT = NULL,
@ThermostatINT = NULL,
@LandlordNotPresentINT = NULL,
@SmokingINT = NULL,
@NoPetsAllowedINT = NULL,
@CatINT = NULL,
@MoreCatsINT = NULL,
@SmallDogINT = NULL,
@LargeDogsINT = NULL,
@DoorpersonINT = NULL,
@IngroundPoolINT = NULL,
@AboveGroundPoolINT = NULL,
@ElevatorINT = NULL,
@UseOfGarageINT = NULL,
@LaundryFacilitiesINT = NULL,
@HealthCenterINT = NULL,
@StorageAreasINT = NULL,
@WheelchairAccessINT = NULL,
@BusinessCentersINT = NULL,
@RentChargeMinINT = NULL,
@RentChargeMaxINT = NULL,
@DebugBIT = 1
)
AS
SET NOCOUNT ON
DECLARE @SQL VARCHAR(8000)
SET @SQL = '
SELECT
r.REListingID,
r.REListingDate,
r.Username,
r.ZipCode,
r.ListingType,
r.StudioFlag,
r.BRFlag1,
r.BRFlag2,
r.BRFlag3,
r.BRFlag4,
r.OverBRFlag4,
r.CondoFlag,
a.WindowAir,
a.CentralAir,
a.BalconyDeckPatio,
a.UseOfYard,
a.Dishwasher,
a.WasherDryer,
a.Fireplace,
a.EIK,
a.HardwoodFloors,
a.BroadbandNet,
a.TV,
a.Thermostat,
a.LandlordNotPresent,
a.Smoking,
a.NoPetsAllowed,
a.Cat,
a.MoreCats,
a.SmallDog,
a.LargeDogs,
a.Doorperson,
a.IngroundPool,
a.AboveGroundPool,
a.Elevator,
a.UseOfGarage,
a.LaundryFacilities,
a.HealthCenter,
a.StorageAreas,
a.WheelchairAccess,
a.BusinessCenters,
a.RentCharge,
a.RentFrequency
FROMdb_REListings as r
INNER JOINdb_RentalAmenities AS a ON a.REListingID = r.REListingID
WHERE1 = 1
'
IF @Studio IS NOT NULL
SET @SQL = @SQL + ' AND r.StudioFlag = ' + CONVERT(VARCHAR(20), @Studio)
IF @Br1 IS NOT NULL
SET @SQL = @SQL + ' AND r.BRFlag1 = ' + CONVERT(VARCHAR(20), @Br1)
IF @Br2 IS NOT NULL
SET @SQL = @SQL + ' AND r.BRFlag2 = ' + CONVERT(VARCHAR(20), @Br2)
IF @Br3 IS NOT NULL
SET @SQL = @SQL + ' AND r.BRFlag3 = ' + CONVERT(VARCHAR(20), @Br3)
IF @Br4 IS NOT NULL
SET @SQL = @SQL + ' AND r.BRFlag4 = ' + CONVERT(VARCHAR(20), @Br4)
IF @OverBr4 IS NOT NULL
SET @SQL = @SQL + ' AND r.OverBRFlag4 = ' + CONVERT(VARCHAR(20), @OverBr4)
IF @Condo IS NOT NULL
SET @SQL = @SQL + ' AND r.CondoFlag = ' + CONVERT(VARCHAR(20), @Condo)
IF @ListingType IS NOT NULL
SET @SQL = @SQL + ' AND r.ListingType = ' + CONVERT(char, @ListingType)
IF @WindowAir IS NOT NULL
SET @SQL = @SQL + ' AND a.WindowAir = ' + CONVERT(VARCHAR(20), @WindowAir)
IF @CentralAC IS NOT NULL
SET @SQL = @SQL + ' AND a.CentralAir = ' + CONVERT(VARCHAR(20), @CentralAC)
IF @BalconyDeckPatio IS NOT NULL
SET @SQL = @SQL + ' AND a.BalconyDeckPatio = ' + CONVERT(VARCHAR(20), @BalconyDeckPatio)
IF @UseOfYard IS NOT NULL
SET @SQL = @SQL + ' AND a.UseOfYard = ' + CONVERT(VARCHAR(20), @UseOfYard)
IF @Dishwasher IS NOT NULL
SET @SQL = @SQL + ' AND a.Dishwasher = ' + CONVERT(VARCHAR(20), @Dishwasher)
IF @WasherDryer IS NOT NULL
SET @SQL = @SQL + ' AND a.WasherDryer = ' + CONVERT(VARCHAR(20), @WasherDryer)
IF @Fireplace IS NOT NULL
SET @SQL = @SQL + ' AND a.Fireplace = ' + CONVERT(VARCHAR(20), @Fireplace)
IF @EIK IS NOT NULL
SET @SQL = @SQL + ' AND a.EIK = ' + CONVERT(VARCHAR(20), @EIK)
IF @HardwoodFloors IS NOT NULL
SET @SQL = @SQL + ' AND a.HardwoodFloors = ' + CONVERT(VARCHAR(20), @HardwoodFloors)
IF @BroadBandNet IS NOT NULL
SET @SQL = @SQL + ' AND a.BroadbandNet = ' + CONVERT(VARCHAR(20), @BroadbandNet)
IF @TV IS NOT NULL
SET @SQL = @SQL + ' AND a.TV = ' + CONVERT(VARCHAR(20), @TV)
IF @Thermostat IS NOT NULL
SET @SQL = @SQL + ' AND a.Thermostat = ' + CONVERT(VARCHAR(20), @Thermostat)
IF @LandlordNotPresent IS NOT NULL
SET @SQL = @SQL + ' AND a.LandLordNotPresent = ' + CONVERT(VARCHAR(20), @LandLordNotPresent)
IF @Smoking IS NOT NULL
SET @SQL = @SQL + ' AND a.Smoking = ' + CONVERT(VARCHAR(20), @Smoking)
IF @NoPetsAllowed IS NOT NULL
SET @SQL = @SQL + ' AND a.NoPetsAllowed = ' + CONVERT(VARCHAR(20), @NoPetsAllowed)
IF @Cat IS NOT NULL
SET @SQL = @SQL + ' AND a.Cat = ' + CONVERT(VARCHAR(20), @Cat)
IF @MoreCats IS NOT NULL
SET @SQL = @SQL + ' AND a.MoreCats = ' + CONVERT(VARCHAR(20), @MoreCats)
IF @SmallDog IS NOT NULL
SET @SQL = @SQL + ' AND a.SmallDog = ' + CONVERT(VARCHAR(20), @SmallDog)
IF @LargeDogs IS NOT NULL
SET @SQL = @SQL + ' AND a.LargeDogs = ' + CONVERT(VARCHAR(20), @LargeDogs)
IF @Doorperson IS NOT NULL
SET @SQL = @SQL + ' AND a.Doorperson = ' + CONVERT(VARCHAR(20), @Doorperson)
IF @IngroundPool IS NOT NULL
SET @SQL = @SQL + ' AND a.IngroundPool = ' + CONVERT(VARCHAR(20), @IngroundPool)
IF @AboveGroundPool IS NOT NULL
SET @SQL = @SQL + ' AND a.AboveGroundPool = ' + CONVERT(VARCHAR(20), @AboveGroundPool)
IF @Elevator IS NOT NULL
SET @SQL = @SQL + ' AND a.Elevator = ' + CONVERT(VARCHAR(20), @Elevator)
IF @UseOfGarage IS NOT NULL
SET @SQL = @SQL + ' AND a.UseOfGarage = ' + CONVERT(VARCHAR(20), @UseOfGarage)
IF @LaundryFacilities IS NOT NULL
SET @SQL = @SQL + ' AND a.LaundryFacilities = ' + CONVERT(VARCHAR(20), @LaundryFacilities)
IF @HealthCenter IS NOT NULL
SET @SQL = @SQL + ' AND a.Health Center = ' + CONVERT(VARCHAR(20), @HealthCenter)
IF @StorageAreas IS NOT NULL
SET @SQL = @SQL + ' AND a.StorageAreas = ' + CONVERT(VARCHAR(20), @StorageAreas)
IF @WheelchairAccess IS NOT NULL
SET @SQL = @SQL + ' AND a.WheelchairAccess = ' + CONVERT(VARCHAR(20), @WheelchairAccess)
IF @BusinessCenters IS NOT NULL
SET @SQL = @SQL + ' AND a.BusinessCenters = ' + CONVERT(VARCHAR(20), @BusinessCenters)
IF @RentChargeMin IS NOT NULL AND @RentChargeMAX IS NOT NULL
SET @SQL = @SQL + ' AND a.RentCharge BETWEEN ' + CONVERT(VARCHAR(20), @RentChargeMin) + ' AND ' + CONVERT(VARCHAR(20), @RentChargeMax)
IF @RentChargeMin IS NOT NULL AND @RentChargeMAX IS NULL
SET @SQL = @SQL + ' AND a.RentCharge >= ' + CONVERT(VARCHAR(20), @RentChargeMin)
IF @RentChargeMAX IS NULL AND @RentChargeMAX IS NOT NULL
SET @SQL = @SQL + ' AND a.RentCharge <= ' + CONVERT(VARCHAR(20), @RentChargeMax)
IF @Debug = 1
PRINT @SQL
EXEC (@SQL)
this query works, i want to add a 4th column that is the value of the 3rd column subracted from the value of the 2nd column, how can i add this?? SELECT `tagid` AS w1, (SELECT count( `value` )FROM tagsWHERE `value` =1AND `tagid` = w1) AS w2, (SELECT count( `value` )FROM tagsWHERE `value` =0AND `tagid` = w1) AS w3FROM tagsWHERE `value` > -1GROUP BY `tagid`ORDER BY w2 DESC
View 1 Replies View RelatedHey,
I know thsi is a silly question but gonna ask it anyway :)
When you are using the 'insert' statement to insert records in to a database are all of the fields in the db table required for a successfull adding of a record.
Just that i have 16 fields in my db table and want to insert only 11 fields in to the new record and it is giving me an error, and i am sure my SQL is correct
So are all fields required ?
Thankyou
Chris
Does any one know a quicker way to get data in from TableA to TableB.
Both tables have the same structure(Acct# varchar(9); Type varchar(12);
Date1 datetime; Date2 datetime; Date3 datetime; Date4 datetime; and Date5 datetime
No Nulls allow in Acct & Type field.
TableA has 5.5 Million Rows and TableB has about 1 million rows , I wrote a Stored Proc
using cursor to select from TableA insert into TableB if the Acct# and Type doesn't exists.
I didn't want to use bcp because I only wanted rows(Acct#'s) that exists in TableA that where not in
TableB. My procedure is working but at a rate of 100 records per minute. Any suggestions?
I have a client that's insisting on deploying SQL Server 2000 as Windows Authntication mode only (not mixed mode). I've always done mixed mode in the past and I'm just looking for some input here. So, what's everyone think?
View 4 Replies View Relateddo not have time to go through BOL .. but whats the command beside dbcc freeproccache to clear the cache .
View 1 Replies View Relatedtry to guess what the result is for this query before you run it:SELECT 123.654, 123d6, 123e4, '123'e4comments welcome, but please do not spoil it for anyone who hasn't tried it yet
source: http://sqlservercode.blogspot.com/
For a query like below ...
How do i have to select only the latest revisions,
if i need to filter last current revisions of each document ...
where the revision could be either alphabetical or even numerical ...
Presently I get all revisions with the below query ...
Note: csd_revi is the field of CSD table for revisions.
---
select distinct
csd1.csd_orig + csd1.csd_subj + csd1.csd_type + csd1.csd_numb + csd1.csd_revi as "Document Reference No.",
csd1.csd_labl + ' ' as "Description"
from
E0437csd csd1,
E0437tra tra1,
E0437csd csd2,
E0437trd trd1,
E0437apr apr1,
E0437apc apc1,
E0437tra tra2,
E0437csd csd3,
E0437trd trd2
where
csd1.csd_orig = 'BS' and
csd1.csd_subj like '%WN1%' and
csd1.csd_type = 'D' and
tra1.tra_drgn = csd1.csd_orig + csd1.csd_subj + csd1.csd_type + csd1.csd_numb + csd1.csd_revi and
tra1.tra_part = 'PARSO' and
tra1.tra_type = 'A' and
csd2.csd_orig + csd2.csd_subj + csd2.csd_type + csd2.csd_numb + csd2.csd_revi = tra1.tra_trno and
trd1.trd_trno = tra1.tra_trno and
trd1.trd_cc = '0' and
trd1.trd_part = 'PARSO' and
apr1.apr_docu = csd1.csd_orig + csd1.csd_subj + csd1.csd_type + csd1.csd_numb + csd1.csd_revi and
(apr1.apr_stat = apc1.apc_code or apr1.apr_stat = '') and
tra2.tra_drgn = csd1.csd_orig + csd1.csd_subj + csd1.csd_type + csd1.csd_numb + csd1.csd_revi and
tra2.tra_part = csd1.csd_ownr and
csd3.csd_orig + csd3.csd_subj + csd3.csd_type + csd3.csd_numb + csd3.csd_revi = tra2.tra_trno and
trd2.trd_trno = tra2.tra_trno
order by
csd1.csd_orig + csd1.csd_subj + csd1.csd_type + csd1.csd_numb + csd1.csd_revi
---
Life is beautiful ... When you smile ...
I asked a question over the weekend and got a answer very quick. I'm new to stored procedures and have to do a insert into two tables. I need to insert into the first table (Journal_log). This table has a colunm ID that is Identity is set to yes. After inserting that record I need to retrieve the ID from the Journal_log that I just inserted and insert it into the second table (District_Journal) with data for a new record into the second. Can this be done in one stored procedure or do I have to have two?
View 20 Replies View RelatedHi Everyone,
I'm new to the board and somewhat new to sql too. So I have a small problem that I hope someone can help me with.
DATA
Name: time1 time2
Jack 1 2
Jack 2 3
Jack 3 4
Jack 8 9
Jane 3 4
I'd like to get a table that combines all the continuous times for each person so that it looks like this:
Jack 1 4
Jack 8 9
Jane 3 4
I'm desperate, and I appreciate it any help! Thanks!
If I have:
Table Test
TestID (PK)
PretestTech (FK IndividualID)
PostTestTech (FK IndividualID)
ProjectManager (FK IndividualID)
TestInfo
Table Individuals
IndividualID (PK)
Initials
First
Last
Is there an efficient way to query for a list of tests with the PretestTech,PostTestTech,and Project manager initials? I guess I'm stuck because I want to Join the Test and Individual tables but there are three fields that need to be joined. So this is the only way I can think to make it work:
SELECT
TestID
,TestInfo
,(SELECT Individual.Initials FROM Individual WHERE Individual.IndividualID = Test.PretestTech) AS 'PretestTech Initials'
,(SELECT Individual.Initials FROM Individual WHERE Individual.IndividualID = Test.PostTestTech) AS 'PostTestTech Initials'
,(SELECT Individual.Initials FROM Individual WHERE Individual.IndividualID = Test.ProjectManager) AS 'ProjectManager Initials'
FROM Test
Is this efficient or should I rethink my Table design?
Thanks