I have a subselect that should be working but doesn't. Been at it too long today.
DECLARE @Calendar1 AS DateTime
SET @Calendar1 = '{{{ Please choose a start date. }}}'
SELECT
('0' + CONVERT (varchar (10), W.WorkerID)) AS VendorID,
(W.FirstName + ' ' + W.LastName) AS VendorName,
(W.FirstName + ' ' + W.LastName) AS Contact,
[code].....
Where did I go wrong?
Is there a way to avoid entering column names in the excel template for me to create an excel file froma dynamic excel using openrowset.
I have teh following code but it works fien when column names are given ahead of time.
If I remove the column names from the template and just to Select * from the table and Select * from sheet1 then it tells me that column names donot match.
Server: Msg 213, Level 16, State 5, Line 1Insert Error: Column name or number of supplied values does not match table definition.
here is my code...
SET @sql1='select * from table1'SET @sql2='select * from table2'
IF @File_Name = '' Select @fn = 'C:Test1.xls' ELSE Select @fn = 'C:' + @File_Name + '.xls' -- FileCopy command string formation SELECT @Cmd = 'Copy C:TestTemplate1.xls ' + @fn
-- FielCopy command execution through Shell Command EXEC MASTER..XP_CMDSHELL @cmd, NO_OUTPUT -- Mentioning the OLEDB Rpovider and excel destination filename set @provider = 'Microsoft.Jet.OLEDB.4.0' set @ExcelString = 'Excel 8.0;HDR=yes;Database=' + @fn
exec('insert into OPENrowset(''' + @provider + ''',''' + @ExcelString + ''',''SELECT * FROM [Sheet1$]'') '+ @sql1 + '') exec('insert into OPENrowset(''' + @provider + ''',''' + @ExcelString + ''',''SELECT * FROM [Sheet2$]'') '+ @sql2 + ' ')
I have a DTSX package which reads values from a fixed-length text file using a data reader and writes some of the column values from the file to an Oracle table. We have used this DTSX several times without incident but recently the process started inserting NULL values for some of the columns when there was a valid value in the source file. If we extract some of the rows from the source file into a smaller file (i.e 10 rows which incorrectly returned NULLs) and run them through the same package they write the correct values to the table, but running the complete file again results in the NULL values error. As well, if we rerun the same file multiple times the incidence of NULL values varies slightly and does not always seem to impact the same rows. I tried outputting data to a log file to see if I can determine what happens and no error messages are returned but it seems to be the case that the NULL values occur after pulling in the data via a Data Reader. Has anyone seen anything like this before or does anyone have a suggestion on how to try and get some additional debugging information around this error?
View 12 Replies View RelatedArif writes "I want to insert values in to a table which is having identity column, how? can you help me out from this problem.
Thanks in advance
Jamal"
Hello,i have a table and if a record is inserted i will test a numeric valuein this table. If the this value is greather as 1 million, than anstatus column should be changed from 'A' to 'B'.Yes and sorry, this is a newbie question.On Oracle this work simple:create trigger myTrigger on tableXasbeginif :old.x 100000 then:new.y:='B'end if;end;ThanksMaik
View 2 Replies View Relatedtable2 is intially populated (basically this will serve as historical table for view); temptable and table2 will are similar except that table2 has two extra columns which are insertdt and updatedt
process:
1. get data from an existing view and insert in temptable
2. truncate/delete contents of table1
3. insert data in table1 by comparing temptable vs table2 (values that exists in temptable but not in table2 will be inserted)
4. insert data in table2 which are not yet present (comparing ID in t2 and temptable)
5. UPDATE table2 whose field/column VALUE is not equal with temptable. (meaning UNMATCHED VALUE)
* for #5 if a value from table2 (historical table) has changed compared to temptable (new result of view) this must be updated as well as the updateddt field value.
I am trying to insert different number of columns into variables. This is what it does If I use a static columns.
declare @AccountType nvarchar(10)
declare @Total numerical(15,2)
declare @1 numerical (15,2)
declare @2 numerical (15,2)
declare @3 numerical (15,2)
#MonthtoDate temp table is created using a dynamic pivot query.
Data looks like this :
Account Type 1 2
3 Total
Type 1 3
0 4 7
Type 2 5
7 1 13
Select @AccountType = AcctType , @Total = MonthToDate, @1 = [1], @2 = [2], @3 = [3] from #MonthtoDate
However the issue is with [1],[2],[3] columns. Those are the number of days of the month. If today is the 3rd day of the month, we only need to show 3 days. So the final table has column [1],[2],[3] and @AccountType and @Total .
We want to run this query everyday to get the moth to date values.If we run this tomorrow, it will have 4 date columns [1], [2],[3],[4] and @AccountType and @Total .
I need to find out if a Transaction ID exists in Table A that does not exist in Table B. If that is the case, then I need to insert into Table B all of the Transaction IDs and Descriptions that are not already in. Seems to me this would involve If Not Exists and then an insert into Table B. This would work easily if there were only one row. What is the best way to handle it if there are a bunch of rows? Should there be some type of looping?
View 12 Replies View RelatedHow can I query/script Column or Table description (extended property MS_Description') in SQLserver 2005 db.
View 4 Replies View RelatedI am trying to get the schema of database using the getschema method. However, the schema that is being returned does not include the description. I have added in table and column descriptions for some of my tables and columns but the dataset returned does not include the description column.
Any idea on how to get the description to be output?
Dim testCn As System.Data.OleDb.OleDbConnection
testCn = New System.Data.OleDb.OleDbConnection(step2.GetRevEngConn.ConnectionString)
Dim testDS As DataTable
testCn.Open()
testDS = testCn.GetSchema("TABLES")
testds.writexml("c:schematables.xml")
testDS = testCn.GetSchema("COLUMNS")
testDS.writexml("C:schemacol.xml")
testCn.Close()
- <Columns>
<TABLE_CATALOG>XDMDB_LAPTOP</TABLE_CATALOG>
<TABLE_SCHEMA>dbo</TABLE_SCHEMA>
<TABLE_NAME>PropertyValue</TABLE_NAME>
<COLUMN_NAME>property_value</COLUMN_NAME>
<ORDINAL_POSITION>6</ORDINAL_POSITION>
<COLUMN_HASDEFAULT>false</COLUMN_HASDEFAULT>
<COLUMN_FLAGS>230</COLUMN_FLAGS>
<IS_NULLABLE>true</IS_NULLABLE>
<DATA_TYPE>130</DATA_TYPE>
<CHARACTER_MAXIMUM_LENGTH>0</CHARACTER_MAXIMUM_LENGTH>
<CHARACTER_OCTET_LENGTH>0</CHARACTER_OCTET_LENGTH>
<CHARACTER_SET_CATALOG>master</CHARACTER_SET_CATALOG>
<CHARACTER_SET_SCHEMA>dbo</CHARACTER_SET_SCHEMA>
<CHARACTER_SET_NAME>iso_1</CHARACTER_SET_NAME>
<COLLATION_CATALOG>master</COLLATION_CATALOG>
<COLLATION_SCHEMA>dbo</COLLATION_SCHEMA>
<COLLATION_NAME>SQL_Latin1_General_CP1_CI_AS</COLLATION_NAME>
<COLUMN_LCID>1033</COLUMN_LCID>
<COLUMN_COMPFLAGS>196609</COLUMN_COMPFLAGS>
<COLUMN_SORTID>52</COLUMN_SORTID>
<COLUMN_TDSCOLLATION>CQTQADQ=</COLUMN_TDSCOLLATION>
<IS_COMPUTED>false</IS_COMPUTED>
</Columns>
the error message I get is
{"Object reference not set to an instance of an object."}
and it points to < Tickr As String = CType(FindControl("TickerTextbx"), TextBox).Text >
this is my code":
Protected Sub TickMastBtn_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles TickMastBtn.Click
REM Collect variablesDim Tickr As String = CType(FindControl("TickerTextbx"), TextBox).Text
Dim Comp As String = CType(FindControl("CoTextbx"), TextBox).TextDim Exch As String = CType(FindControl("ExchTextbx"), TextBox).Text
REM Create connection and command objectsDim cn As New SqlConnection("Data Source=.SQLEXPRESS;AttachDbFilename=C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataVTRADE.mdf;Integrated Security=True;Connect Timeout=30;User Instance=True")Dim cmd As New SqlCommand
cmd.Connection = cn
REM Build our parameterized insert statementDim sql As New StringBuilder
sql.Append("INSERT INTO TickerMaster ")sql.Append("(Ticker,Company,Exchange,) ")sql.Append("VALUES (@Tickr,@Comp,@Exch,)")
cmd.CommandText = sql.ToString
REM Add parameter values to command
REM Parameters used to protect DB from SQL injection attacksWith cmd.Parameters
.Add("Tickr", SqlDbType.Int).Value = Tickr.Add("Comp", SqlDbType.VarChar).Value = Comp
.Add("Exch", SqlDbType.VarChar).Value = Exch
End With
REM Now execute the statement
cn.Open()
cmd.ExecuteNonQuery()
cn.Close()
End Sub
I have a table 'wRelated' with the following columns
[related_id] [int]
[channel_id] [int]
[mui] [varchar]
[price_group_id]
[type_id] [int]
[related_mui] [varchar] (100)
[date_started] [smalldatetime]
[date_ended] [smalldatetime]
[date_entered] [datetime]
[deleted] [tinyint],
[rank] [int]
data in column [mui] is repeated as the table has more than one entries for the same [mui],
The requirement is to select the distinct[mui] but value in all the other columns for the same mui should be select in the next row with null for the same [mui]
The recordset expected should be something like this.
[mui],[related_mui],[price_group_id],[date_entered],[date_ended] m123,rm345,'pr','12-10-2003',12-12-2004'
null,rm789,'ar','12-1-2003',26-2-2004'
null,rm999,'xy','14-12-2002',12-2-2004'
m777,rm889,'pr','12-12-2004',12-12-2004'
null,rm785,'yy','1-10-2002',12-12-2004'
m888,rm345,'pr','2-8-2003',12-12-2004'
null,rm345,'tt','30-7-2002',12-12-2004'
I have tried Unions and temporary table inserts.
I have been provided with a table where one of the columns is of TimeStamp data type. My question is how to insert and update data in this column through my SQL Statement? When I run my SQL statement, it gives me an error with this column name in the error.
View 3 Replies View RelatedI have table with about 10000 rows, there is a column named Raw_XMLData is defined as varchar but data is xml format.
I try to insert into another table, if Raw_XMLData column has is valid xml data?
Is it possible to do in T sql?
Hi,
I need to insert data into a table using data flow task. Unfortunately this table's priamry key column (integer column) is not identity column. I am looking a way to get the primary key value for the new records. Please advice. Thanks
I'm executing a stored procedure but got error :
Msg 213, Level 16, State 1, Procedure ExtSales, Line 182
Column name or number of supplied values does not match table definition.
hi.
i cant get this quite right.
i have a table and i need to insert one column with data from another table. it goes something like this (although i know this is wrong, just here for a visual explaination) :
Code:
INSERT INTO List
(list_date, email_address, list_status, list_email)
values
(
GetDate()
, 'name@rice.edu'
, 0
, SELECT emailAddress FROM Users WHERE id = '72'
)
so, list_email needs the email address from the Users
table. i tried messing around with inner joins but, well,
here i am...
thanks in advace.
Hi,
I am having problem in bulk update of a sql server table haning identity column from a datatable( has no identity column) using sqlbulkcopy. I tried several approaches, but it does not show any error nor is the table getting updated. But the identity value seems to getting increased every time.
thanks.
varun
I have 'codes' and 'Description' field in 'ecode' table and 'codes' in quote table values for 'Codes' in quote table is like
Quoteid Codes
0012 LB,WS
0031WDC
In 'ecode' table 'description' column contain the description for each code
for eg :
Ecode Table : -
Codes Description
Lb - Late Booking
WS - Winter Sports
WDC - Wedding Cover
How to select 'description' when retrieving data from quote table
Can anyone assist me with a script that adds a new column to a table then inserts new values into the new column based on the Table below. i have included an explanation of what the script should do.
Column from
Parts Table Column from
MiniParts New Column in
(Table 1 ) (Table 2 ) MiniParts (Table2)
PartsNum
MiniPartsCL
NewMiniPartsCL
1
K
DK
1
K
K
1
Q
Q
0
L
L
0
L
LC
0
D
G
0
S
S
I have 2 tables in a database. Table 1 is Parts and Table 2 is MiniParts. I need a script that adds a new column in the MiniParts table. and then populate the new column (NewMinipartsCL) based on Values that exist in the PartsNum column in the Parts Table, and MiniPartsCL column in the MiniParts columns.
The new column is NewMiniPartsCL. The table above shows the values that the new column (NewMiniPartsCL) should contain.
For Example
Anytime you have "1" in the PartsNum column of the Parts Table and the MiniPartsCL column of the MiniParts Table has a "K" , the NewMiniPartsCL column in the MiniParts Table should be populated with "DK" ( as shown in the table above).
Anytime you have "1" in the PartsNum column of the Parts Table and the MiniPartsCL column of the MiniParts Table has a "K" , the NewMiniPartsCL column in the MiniParts Table should be populated with "K" ( as shown in the table above). etc..
Please be easy on me...I haven't touched SQL for a year. Why given;
Code Snippet
USE [Patients]
GO
/****** Object: Table [dbo].[Patients] Script Date: 08/31/2007 22:09:29 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[Patients](
[PID] [int] IDENTITY(1,1) NOT NULL,
[ID] [varchar](50) NULL,
[FirstName] [nvarchar](50) NULL,
[LastName] [nvarchar](50) NULL,
[DOB] [datetime] NULL,
CONSTRAINT [PK_Patients] PRIMARY KEY CLUSTERED
(
[PID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
do I get
Msg 102, Level 15, State 1, Line 3
Incorrect syntax near ','.
for the following;
Code Snippet
INSERT INTO Patients
(ID, FirstName,LastName,DOB) VALUES
( '1234-12', 'Joe','Smith','3/1/1960'),
( '5432-30','Bob','Jones','3/1/1960');
Thank you,
hazz
Hi
I need to read a very big table more than 60,000 record but it is giving the following problem: But if it is small table there is no problem. Same problem also views.
Server Error in '/POBuilds' Application.
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine. Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
<!-- Web.Config Configuration File -->
<configuration>
<system.web>
<customErrors mode="Off"/>
</system.web>
</configuration>Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
<!-- Web.Config Configuration File -->
<configuration>
<system.web>
<customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration>
I have created a table Table with name as Varchar and id as int. Now i have started inserting the rows like, insert into Table values ('arun',20).Yes i have inserted a row in the table. Now i have got the values " arun's ", 50. insert into Table values('arun's',20) My sqlserver is giving me an error instead of inserting the row. How will you solve this problem?
I have a form with a few panels on it, and the visibility of the panels is determined by a radiobutton selection. Once a user selects a radio button item, the appropriate panels visibility changes to true. On two of the panels, there is a drop down list with a list of clients, and the dropdownlists are named Client1 and Client2 (Client 1 is included in panel 1 and client 2 is in panel 2)
How do I insert the values for client1 or client2 (depending upon which is visible) into the same sql column via a stored procedure? The database field is called client. How do I get the value from my vb.net form into the stored procedure?
I have two tables.
S
SNO CHAR(5)
SNAME CHAR(20)
S1
SNo CHAR(5)
SNAME CHAR(20)
The structure is same but S(SNAME) does not contain data. If I use the following command of SQL then It appends the rows in table. I want that the values should be inserted from TOP to BOTTOM.
INSERT INTO S (SNAME)
Select sname from s1
Could anybody solve this probelm?
Thanks
In SQL 2005 I created table as
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[logMsg](
[logMsgID] [int] IDENTITY(1,1) NOT FOR REPLICATION NOT NULL,
[msg] [nvarchar](256) COLLATE Latin1_General_CI_AS NOT NULL,
[AppId] [int] NULL,
CONSTRAINT [PK_logMsg] PRIMARY KEY CLUSTERED
(
[logMsgID] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
and trying to insert values with
INSERT INTO [ProxyDB].[dbo].[logMsg]
([msg]
,[AppId])
VALUES
('Text Test',1)
Getting error message:
Msg 213, Level 16, State 1, Procedure TrgInslogMsg, Line 14
Insert Error: Column name or number of supplied values does not match table definition.
Urgent help is required
I need to create the following table in reporting services
PRODUCT April March Feb
2008 2007 2008 2007 2008 2007
chair 8 9 7 4 4 4
table 3 4 5 6 4 6
My problem is the month names are a column in the dataset, but I dont know how to get it to fill as column headers???
Thanks in advance!!!
Here is my table:
My question is: How can I insert a row for each unique TemplateId. So let's say I have templateIds like, 2,5,6,7... For each unique templateId, how can I insert one more row?
I am writing a query to return some production data. Basically i need to insert either 1 or 2 rows into a Table variable based on a decision as to does the production part make 1 or 2 items ( The Raw data does not allow for this it comes from a look up in my database)
I can retrieve all the source data i need easily but when i come to insert it into the table variable i need to insert 1 record if its a single part or 2 records if its a twin part. I know could use a cursor but im sure there has to be an easier way !
Below is the code i have at the moment
declare @startdate as datetime
declare @enddate as datetime
declare @Line as Integer
DECLARE @count INT
set @startdate = '2015-01-01'
set @enddate = '2015-01-31'
[Code] .....
I need Insert rows in the OrderDetails Table based on values in the Orders Table
In the Orders table i have a columns called OrderID and ISale.
In the OrdersDetails i have columns called OrderID and SaleType
For each value in the OrderID Column of the Orders Table, anytime the ISale Column in the Orders table = 1, and the SalesType column in the OrderDetails table is empty, I want to add two rows in the OrderDetails table. One row with the value K and another row with the value KD.
That is a row will be added and the value in the SalesType column will be K, also a second row will be added and the value in the SalesType column will be KD
Also for each value in the OrderID Column of the Orders Table, anytime the ISale Column in the Orders table = 0, and the SalesType column in the OrderDetails table is empty, I want to add two rows in the OrderDetails table. One row with the value Q and another row with the value QD
That is a row will be added and the value in the SalesType column will be Q, also a second row will be added and the value in the SalesType column will be QD.
I need a SQL Script to accomplish this. thanks
I receive this message when I try to run any report. The reportserver and reportservertempdb databases were upgraded using backup/restore from SQL2000 to SQL2005 on a separate server which is running RS2005 . Please help. Thanks
View 1 Replies View RelatedA column of a table has values in the format - 35106;#Grandbouche-Cropp, Amy.
I need to format the column data in such a way that only the text after # (Grandbouche-Cropp, Amy) remain in the column.
The text before ;# (35106) should be inserted in to another column of the same table.
Below is the table structure:
create table [HR_DEV_DM].[CFQ_TEST].sp_CFQ_Commercial_Referrals
(
ID int identity,
PromotionalCode nvarchar(4000),
QuoteNumber nvarchar(100),
CreatedBy nvarchar(100),
Created datetime,
ModifiedBy nvarchar(100),
Modified datetime,
CreatedBy_SalesRepSharePointID int,
ModifiedBy_ModBySharePointID int
)
Hello,
I am receiving the following error:
Column name or number of supplied values does not match table definition
I am trying to insert values into a temp table, using values from the table I copied the structure from, like this:
SELECT TOP 1 * INTO #tbl_User_Temp FROM tbl_User
TRUNCATE TABLE #tbl_User_Temp
INSERT INTO #tbl_User_Temp EXECUTE UserPersist_GetUserByCriteria @Gender = 'Male', @Culture = 'en-GB'
The SP UserPersist_GetByCriteria does a
"SELECT * FROM tbl_User WHERE gender = @Gender AND culture = @Culture",
so why am I receiving this error when both tables have the same
structure?
The error is being reported as coming from UserPersist_GetByCriteria on the "SELECT * FROM tbl_User" line.
Thanks,
Greg.