Realtime Flat File Transfer
Apr 18, 2007
Firstly I am not a programmer; and this is the first time I have used this forum
I am working with some friends who have been assisting.
I am developing a product that is importing data into a sequel data base, and the data is being recorded in real time but posted at minute intervals. The data is then being exported to a local flat file again at minute intervals each row containing about 50 columns.
Currently the whole file is being imported across the internet and it all works fine. I am using analysis services to look at the data every two minutes. As the file grows this time becomes longer. What I want to do is only import the latter portion of the flat file, say the last 144 rows there are 1440 rows per day.
What is the most efficient way to do this? Duplicated records would be a disaster.
Ideally the number of rows to be collected would be variable not fixed at 1440, these rows would be added to the main table that will probably contain up to 1 years worth of data i.e. 1440 rows * 365 days with approx 50 columns.
Any comments to point me in the right direction would be appreciated.
Steve
View 3 Replies
ADVERTISEMENT
Aug 1, 2007
for example, if i was to change my smtp server within the rsreportserver.config file, does it automatically update in realtime the second i save it or do i need to refresh something?
any insight on this would be grateful before i do anything.
thanks!
View 3 Replies
View Related
Aug 24, 2007
Hi,
I am testing SSIS and have created a Flat File Destination. I defined the Flat File Connection as New for the first time and it worked fine. Now, I would like to go back and modify the Flat File Connection in the Flat File Destination Editor, but it allows only to create a New connection rather allowing me to edit the existing one. For testing, I can go back and create a new connection, but if my connection had 50-100 columns then it would be an issue to re-create it from scratch.
Did someone else faced this issue?
Thanks,
AQ
View 1 Replies
View Related
Dec 27, 2006
Hi,
I have a situation where a tab limited text file is used to populate a sql server table.
The tab limited text file comes from a third party vendor. There are fixed number of columns we need to export to the sql server table. However the third party may add colums in the text file. Whenenver the text file has an added column (which we dont need to import) the build fails since the flat file connection manager does not create the metadata for it again. The problem goes away where I press the button "Reset Columns" since it builds the metadata then. Since we need to build the tables everyday we cannot automate it using SSIS because the metadata does not change automatically. Is there a way out in SSIS?
View 5 Replies
View Related
May 11, 2006
I am transferring data from an OLEDB source to a Flat File Destination and I want the column width for all of the output columns to 30 (max width amongst the columns selected), but that is not refected in the Fixed Width Flat File that got created. The outputcolumnwidth seems to be the same as the inputcolumnwidth. Is there any other setting that I am possibly missing or is this a possible defect?
Any inputs will be appreciated.
M.Shah
View 3 Replies
View Related
Nov 10, 2006
Hi all,
I m using SSIS and i am transfering the data from Flat File Source to the OLE DB destination File. The source file contain some corrupt data which i am transfering to the other Flat file destination file.
Debugging is succesful but i am not getting any error output in the Flat file destination file.
i had done exactly which is written in the msdn tutorial of SSIS.
Plz tell me why i am not getting the error output in the destination flat file?
thanx
View 1 Replies
View Related
Feb 11, 2008
First, a couple of important bits of information. Until last week, I had never touched SISS, and therefore, I know very little about it. I just never had the need to use it...until now. I was able to convert my first 3 flat files to SQL2005 tables by right clicking on "SISS Package" and choosing "SISS Import and Export Wizard". That is the extent of my knowledge! So please, please, please be patient with me and be as descriptive as possible.
I thought I could attach some sample files to this post, but it doesn't look like I can. I'll just paste the information below in two separate code boxes. The first code box is the flat file specifications and the second one is a sample single line flat file similar to what I'm dealing with (the real flat file is over 2 gigs).
My questions are below the sample files.
Code Snippet
Record Length 400
Positions Length FieldName
Record Type 01
1,2 L=2 Record Type (Always "01")
3,12 L=10 Site Name
13,19 L=7 Account Number
20,29 L=10 Sub Account
30,35 L=6 Balance
36,37 L=1 Active
37,41 L=5 Filler
Record Type 02
1,2 L=2 Record Type (Always "02")
3,4 L=2 State
5,30 L=26 Address
31,41 L=11 Filler
Record Type 03
1,2 L=2 Record Type (Always "03")
3,6 L=4 Coder
7,20 L=14 Locator ID
21,22 L=2 Age
23,41 L=19 Filler
Record Type 04
1,2 L=2 Record Type (Always "04")
3,9 L=7 Process
10,19 L=10 Client
20,26 L=6 DOB
26,41 L=16 Filler
Record Type 05
1,2 L=2 Record Type (Always "05")
3,16 L=14 Guarantor
17,22 L=6 Guar Account
23,23 L=1 Active Guar
**There can be multiple 05 records, one for each Guarantor on the account**
and the single line flat file...
Code Snippet
01Site1 12345 0000098765 Y 02NY1155 12th Street 03ELL 0522071678 29 04TestingSmith,Paul071678 05Smith, Jane 445978N 05Smith, Julie 445989N 05Smith, Jenny 445915N 01Site2 12346 0000098766 N 02MN615 Woodland Ct 04InfoJones,Chris 012001 01Site3 12347 0000098767 Y 02IN89 Jade Street 03OWB 6429051282 25 04Screen New,Katie 879500
As you can see, each entry could have any number of records and multiples of some of the record types, with one exception, every entry must have a "01" record and can only have one "01" record. Oh, and each record has a length of 400.
I need to get this information into a SQL 2005 database so I can create a front end for accessing the data. Originally, I wanted one line for each account and have null values listed for entries that don't have a specific record. Now that I've looked at the data again, that doesn't look like a good idea. I think a better way to do it would be to create 5 different tables, one for each record type. However, records 2 through 5 don't have anything I can make a primary key. So here are my questions...
Is it possible to make 5 tables from this one file, one table for each of the record types?
If so, can I copy the Account number in record 01, position 13-19 in each of the subsequent record types (that way I could link the tables as needed)?
Can this be done using the SISS Import and Export Wizard to create the package? If not, I'm going to need some very basic step by step instructions on how to create the package.
Is SISS the best way to do this conversion or is there another program that would be better to use?
I know this is a huge question and I appreciate the help of anyone who boldly decides to help me! Thank you in advance and I welcome anyone's suggestions!
View 13 Replies
View Related
Mar 13, 2006
How can I take this example Flat file and parse out each section to a new flat file? Each section starts with HD (header row)
http://www.webfound.net/flat_file_example.txt
e.g. an example output file based on above (cutting out the first section) would be:
http://www.webfound.net/flatfile_output.txt
Also, I'll need to grab a certain value in each header row (certain position in the 100 byte header row) to use that as part of the filename that's outputed. I assume it would be better to insert these rows into a temp table then somehow do a search on a specific position in the row...but that's impossible? The other route is to insert each row into a temp table separated out by fields but that is going to be too combursome because we have several formats to determine separation of fields based on the row type so I'd have to create many temp tables and many components in SSIS when all we want to do is again:
1) output each group (broken by each header row) into it's own txt file
2) use a field in the header row as part of the name of the output txt file (e.g. look at the first row, whcih is a header row in flat_file_example. txt. I want to grab the text 'AR10' and use that as part of the filename that I create
Any suggestions on how to approach this whole process in SSIS...the simplest approach that will work ?
View 1 Replies
View Related
Mar 19, 2014
In the full recovery model, if i run a transaction that inserts 10MB of data into a table, then 10 MB of data is moved in the data file. Does this mean then that the log file will grow by exactly 10MB as well?
I understand that all transactions are logged to the log file to enable rollback and point in time recovery, but what is actually physically stored in the log file for this transactions record? Is it the text of the command from the transaction or the actual physical data from that transaction?
I ask because say if I have two drives, one with 5MB/s write speed for the log file and one with 10MB/s write speed for the data file, if I start trying to insert 10 MB of data per second into the table, am I going to be limited to 5MB/s by the log file drive, or is SQL server not going to try and log all 10 MB each second to the log file?
View 6 Replies
View Related
Jun 23, 2015
I have a package in which there are only one Data flow Task and it has only three components. 1) Source , which is a SQL db 2) destination and 3) OLE DB Destination flat file Error output file. I want the error file to be created ONLY if there is any error while dumping the data into destination DB. But , the issue is, the error flat file is being created inspite of No error while dumping the data from Source to Destination.
View 5 Replies
View Related
Jul 24, 2015
Need to know how I can get the dynamic filename created in the FlatFile destination for insert into a package audit table?
Scenario: Have created a package that successfully outputs Dynamiclly named flat files { Format: C:Test’Comms_File_’ + ‘User::FileNumber’+’_’+Date +’.txt’
E.g.: Comms_File_1_20150724.txt, Comms_File_2_20150724.txt etc} using Foreach Loop Container :
* Enumerator Set to: “Foreach ADO Enumerator” with the ADO object source variable selected to identify how many total loop iterations there are i.e. Let’s say 4 thus 4 files to be created
*Variable Mappings : added the User::FileNumber – indicates which file number current loop iteration is i.e. 1,2,3,4
For the DataFlow task have a OLDBSource and a FlatFile Destination where Flat File ConnectionString is set up as:
@[User::Output_Path] + "Comms_File"+ @[User:: FileNumber] +"_" + replace((DT_WSTR, 10) (DT_DBDATE) GETDATE(),"-","")+ ".txt"
All this successfully creates these 4 files:
Comms_File_1_20150724.txt, Comms_File_2_20150724.txt, Comms_File_3_20150724.txt, Comms_File_4_20150724.txt
Now the QUESTION is how do I get these filenames as I need to insert them into a DB Audittable. The audit table looks like this:
CREATE TABLE dbo.MMMAudit
(
AuditID INT IDENTITY(1, 1) NOT NULL,
PackageName VARCHAR(100) NULL,
FileName VARCHAR(100) NULL,
LoadTime DATETIME NULL,
NumberofRecords INT NULL
)
To save the Filename & how many records in each file in our Audit Table, am using an Execute SQL Task and configuring it as this:
Execute SQL Task
Parameter mapping - Mapped the User Variable (RecordsInserted) and System Variable( PackageName) to Insert statement as shown below
SQLStatement: INSERT INTO [dbo].[MMMAudit] (
PackageName,NumerofRecords,LoadTime)
(?,?.GETDATE)
Again this all works terrific & populates the dbo.MMMAudit table as shown below BUT I also need to insert the respsctive file name – How do I do that?
AuditID PackageName FileName NumberOfRecords
1 MMM NULL 12
2 MMM NULL 23
3 MMM NULL 14
4 MMM NULL 1
View 2 Replies
View Related
Apr 14, 2014
I need find out the number of columns in flat file before i process that particular file.I have file name in @filename variable and file path is @filepath variable.But do not not that how i will check the column name in before i will process that file.
@filePath = C:DatabaseSourceFilesCAHCVSSourceFiles
And i am using for each loop container to read the file one by one and put the file name in @filename variable.and my file name like
Product_20120607060930.txt
Product_20130708060930.txt
[code]....
Now what i have to do is i need to make sure that ID,Name,City,County,Phone is there in flat file.if it is not there then i have to send mail to client saying that file is not valid.I need to also calculate the size of flat file.
View 4 Replies
View Related
Jan 31, 2008
What is the easiest way to accomplish this task with SSIS?
Basically I have a stored procedure that unions multiple queries between databases. I need to be able to export this to a text file on a daily basis and add a total records: row to the end of the text file.
Thanks in advance for any help.
View 7 Replies
View Related
May 13, 2008
Hello Experts,
I am createing one task (user control) in SSIS. I have property grid in my GUI and 2 buttons (OK & Cancle).
PropertyGrid has Properties like SourceConnection, OutputConnection etc....right now I am able to populate Connections in list box next to Source and Output Property.
Now my question to you guys is depending on Source Connection it should read that text file associated with connection manager. After validation it should pick header (first line of text file bases on record type) and write it into new file when task is executed. I have following code for your reference. Please let me know I am going in right direction or not..
What should go here ?
->Under Class A
public override DTSExecResult Execute(Connections connections, VariableDispenser variableDispenser, IDTSComponentEvents componentEvents, IDTSLogging log, object transaction)
{
//Some code to read file and write it into new file
return DTSExecResult.Success;
}
public const string Property_Task = "CustomErrorControl";
public const string Property_SourceConnection = "SourceConnection";
public void LoadFromXML(XmlElement node, IDTSInfoEvents infoEvents)
{
if (node.Name != Property_Task)
{
throw new Exception(String.Format("Invalid task element '{0}' in LoadFromXML.", node.Name));
}
else
{
try
{
_sourceConnectionId = node.Attributes.GetNamedItem(Property_SourceConnection).Value;
}
catch (Exception ex)
{
infoEvents.FireError(0, "LoadFromXML", ex.Message, "", 0);
}
}
}
public void SaveToXML(XmlDocument doc, IDTSInfoEvents infoEvents)
{
try
{
// // Create Task Element
XmlElement taskElement = doc.CreateElement("", Property_Task, "");
doc.AppendChild(taskElement);
// // Save source FileConnection
XmlAttribute sourcefileAttribute = doc.CreateAttribute(Property_SourceConnection);
sourcefileAttribute.Value = _sourceConnectionId;
taskElement.Attributes.Append(sourcefileAttribute);
}
catch (Exception ex)
{
infoEvents.FireError(0, "SaveXML", ex.Message, "", 0);
}
}
In UI Class there is OK Click event.
private void btnOK_Click(object sender, EventArgs e)
{
try
{
_taskHost.Properties[CustomErrorControl.Property_SourceConnection].SetValue(_taskHost, propertyGrid1.Text);
btnOK.DialogResult = DialogResult.OK;
}
catch (Exception ex)
{
Console.WriteLine(ex);
}
#endregion
}
View 10 Replies
View Related
Oct 24, 2007
Hi all,
In a foreachloop, I am inserting records into a flat file which is working fine. But the thing is that as the file grows, it takes longer for it to locate the EOF(End of File) of the flat file so as to insert the records.
I have around 70-100 lines written to the file at each loop and there are more than 20k records to be looped. wihich means that at the end I should be having 1400k - 20000k line in the text file.
One solution would be to insert the records at the start of the file itself so that it does not has to lookup the EOF each time before writting.
Another would be to generate separate files and then merge it.
Any idea how can this can be done?
Beside this I have to zip the file and then SFTP to a given address.
Any suggestion or help would be welcome.
Rdgs
David
View 5 Replies
View Related
Apr 6, 2015
I am running my package in sql server 2012, in which i am giving network path for flat file destination. And its working fine. But if i give m local path, its giving me error " cannot open data file" ...
Nothing is wrong with package.
View 10 Replies
View Related
Dec 27, 2007
Here's a really annoying problem. Let's say you have a text file with 2 million rows.Delimiters all look good and rows are previewed well but the file has a missing row at say lin 1234567 - way deep in the file. When SSIS encounters the blank row, an error is raised and processing on the file STOPS! I verified this in by checking the SSIS log and have even developed an error routine to notify me via email when the error occurs (really cool if I do say so myself ). The main problem still remains - how to resume processing from the point of failure in the file? Any help is appreciated. Thanks.
View 13 Replies
View Related
Mar 29, 2006
How do I insert data from a flat file or .csv file into an existing SQL database???
Here what I've come up with thus far and I but it doesn't work. Can someone please help? Let me know if there is a better way to do this... Idealy I'd like to write straight to the sql database and skip the datset all together...
strSvr = "vkrerftg"
StrDb = "Test_DB"
'connection String
strCon = "Server=" & strSvr & ";database=" & StrDb & "; integrated security=SSPI;"
Dim dbconn As New SqlConnection(strCon)
Dim da As New SqlDataAdapter()
Dim insertComm As New SqlCommand("INSERT INTO [Test_DB_RMS].[dbo].[AIR_Ouput] ([Event], [Year], [Contract Loss],[Company Loss], " & _
"[IndInsured Loss Prop],[IndInsured Loss WC],[Event Info]) " & _
"VALUES (@Event, @Year, @ConLoss, @CompLoss, @IndLossProp, @IndLossWC, @eventsInfo)", dbconn)
insertComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
insertComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
insertComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
insertComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
insertComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
insertComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
insertComm.Parameters.Add("@eventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.InsertCommand = insertComm
Dim upComm As New SqlCommand("UPDATE [Test_DB_RMS].[dbo].[AIR_Ouput] " & _
"SET [Event] = @Event " & _
",[Year] = @Year " & _
",[Contract Loss] = @ConLoss " & _
",[Company Loss] = @CompLoss " & _
",[IndInsured Loss Prop] = @IndLossProp " & _
",[IndInsured Loss WC] = @IndLossWC " & _
",[Event Info] = @EventInfo", dbconn)
upComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
upComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
upComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
upComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
upComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
upComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
upComm.Parameters.Add("@EventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.UpdateCommand = upComm
da.Update(dsAIR, "TextDB")
************* ANY HELP WOULD BE GREATLY APPRECIATED************
THANKS
View 6 Replies
View Related
Apr 3, 2007
Hi,
I have a flat file, comma-delimited, with strings in double-quotes.
In the connection manager for the file, I have specified that the Text Qualifier = ""
However, in the preview tab, it still shows the strings as surrounded by the quotes, e.g. "mycol1" whereas it should show mycol1 without the quotes.
Next, when I examine the data in the database after the load, it's messed up there also.
"mycol1" ends up in the database as "mycol1
"mycol2" ends up as "mycol2
This is not right.
I have format set to delimited, header row delimiter crlf, etc.
Any ideas?
Thanks
View 3 Replies
View Related
May 27, 2008
Hi,
I have a package A which is copied from another existing package B as most of the data structure and ETL mappings are same.
What I need to change in Package A is to change the file in Flat File Connection Manager. I can change it in the conneciton manager editor. However, it is automatically changed back to the previous one everytime when I try to Save All or run the package.
I also tried to copy/paste this Flat File Connection Manager in the same package but samething happen. The package file is not set 'Read Only" so anything else can Saved well except for the File name in connection manager.
Is this a bug? It would be very appreciated if anyone can give me any idea about this.
Thanks,
Jenny
View 7 Replies
View Related
Mar 29, 2006
How do I insert data from a flat file or .csv file into an existing SQL database???
Here what I've come up with thus far and I but it doesn't work. Can someone please help? Let me know if there is a better wway to do this... Idealy I'd like to write straight to the sql database and skip the datset all together...
strSvr = "vkrerftg"
StrDb = "Test_DB"
'connection String
strCon = "Server=" & strSvr & ";database=" & StrDb & "; integrated security=SSPI;"
Dim dbconn As New SqlConnection(strCon)
Dim da As New SqlDataAdapter()
Dim insertComm As New SqlCommand("INSERT INTO [Test_DB_RMS].[dbo].[AIR_Ouput] ([Event], [Year], [Contract Loss],[Company Loss], " & _
"[IndInsured Loss Prop],[IndInsured Loss WC],[Event Info]) " & _
"VALUES (@Event, @Year, @ConLoss, @CompLoss, @IndLossProp, @IndLossWC, @eventsInfo)", dbconn)
insertComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
insertComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
insertComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
insertComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
insertComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
insertComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
insertComm.Parameters.Add("@eventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.InsertCommand = insertComm
Dim upComm As New SqlCommand("UPDATE [Test_DB_RMS].[dbo].[AIR_Ouput] " & _
"SET [Event] = @Event " & _
",[Year] = @Year " & _
",[Contract Loss] = @ConLoss " & _
",[Company Loss] = @CompLoss " & _
",[IndInsured Loss Prop] = @IndLossProp " & _
",[IndInsured Loss WC] = @IndLossWC " & _
",[Event Info] = @EventInfo", dbconn)
upComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
upComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
upComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
upComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
upComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
upComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
upComm.Parameters.Add("@EventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.UpdateCommand = upComm
da.Update(dsAIR, "TextDB")
************* ANY HELP WOULD BE GREATLY APPRECIATED************
THANKS
View 3 Replies
View Related
Sep 14, 2006
Hi,
I have a task to traverse a folder of CSV files of same format and then populate into one sql server table.
Is there a way where I can change the source CSV file name runtime using FOR EACH loop container for flat file connection manager ?
any help would be much appriciated.
Thanks,
Furrukh Baig
View 5 Replies
View Related
May 29, 2008
Hi,
I'm attempting to use a variable to define the file name in my flat file connection (for error files in my SSIS package).
I have it defined as follows:
@[User::ValidRootFolder]ConditionConditionSourceError.csv
However it throws an error 'the filename, directory name, or volume label syntax is incorrect'.
If I put the value of the variable in explicitly it works, so I know my variable name is correct - am I just not calling the variable properly?
Thanks
View 11 Replies
View Related
Mar 28, 2006
Hi,
we have one requirement to run the package daily basis.
The package should run at specific time on that day.
we are using windows schedular for that.
we will have one new flatfile everyday.
Is there any process to attach this file to flat file source dynamically?
The requirement is,
The flat file should be able to read the new flatfile everyday.
we have no option change it manually, the flatfile source should have to take the file automatically at that time.
So that it can take that flatfile and load it into database table.
View 1 Replies
View Related
May 22, 2008
Hi All,
We have a SSIS package which is accessing a remote Windows file share location.
The package first moves the file from folder-1 to folder-2 and also renames the file during this process.
Then the package reads the file (using a flat file connection FF_SRC) from folder-2 and renames it again after processing it successfully.
The permissions given to the user executing the package on folder-2 are: Read+Write+Modify+List folder contents.
We are facing an error:
Code SnippetFile or directory "Z:folder-2XYZ.txt" represented by connection "FF_SRC" does not exist.
We are getting the above error when the SSIS package is trying to rename the file the second time in folder-2.
However, the file exists in folder-2.
The OS is Windows 2000 Server SP4.
Any ideas why this could be happening and how it could be resolved?
Best Regards,
Avnip
View 8 Replies
View Related
Feb 14, 2007
I am wondering how easy is to check for file locks and have our SSIS Package to wait until file has been release by the process which is using it.
Also, same question when we're writing to a Flat File (or Flat File Destination).
Thanks,
View 3 Replies
View Related
Apr 17, 2008
Hello friends,
I have the following (simplified):
1. Flat File Source
2. Conditional Split, Case Good = !ISNULL(KEY) Case Error = ISNULL(KEY)
3. Case Good -> Writes to Good Flat File (with timestamp in the title)
4. Case Error -> Writes to Error Flat File (with timestamp in the title)
Most job runs have no errors but the error file is created as a zero byte file anyway. If there are no error records I don't want the error file created. How might I accomplish this?
Thanks
View 5 Replies
View Related
Jan 16, 2008
I have a txt file with format as following
MailAddress:Kienpt@ifi.local
DomainName:ETH2K
[Date]2007/12/27 15:02:50 [Operation]
[Date]2007/12/27 15:02:50 [Operation]
[Date]2007/12/27 15:02:50 [Operation]
I want to use File Flat Connection to analyse format of this file. And i want each record after analysing include 4 fields as folowing:
- MailAddress, DomainName, Date, Operation
(Mail Address and DomainName is same in each record)
Can you help me?
View 1 Replies
View Related
Aug 16, 2007
I have a tsql script that gets the data I need, into the format I need, and saves it in a format (.output) I needI also have a script that creates a header for the report, basically its just a name and rowcount() that also works fine.PROBLEM: If I combine them using UNION, I have to pad out the header report with NULL columns, and it messes up the layout of the report.Anyone have a simple way to do this?here's my code:SELECT 'A71310000'+ltrim(Str(count(UserName))) + 'HRBATCH' AS header, NULL as col2, NULL as col3, NULL as col4, NULL as col5, NULL as col6, NULL as col7, NULL as col8FROM db_owner.PS_HR_HrsWHERE Reported is NULLUNION ALLSELECT EmplID, Convert(VarChar,DateWorked,111),'STSSH', CAST(REPLACE(STR(HoursWorked,9, 5), SPACE(1), '0') AS nchar(9)), HRAccountCode, CAST(REPLACE(STR(EmployeePayRate,18, 6), SPACE(1), '0') AS nchar(18)), 'A_STUDSUM', HRAccountCodeOverrideFROM db_owner.PS_HR_HrsWHERE reported is NULL What I need it to look like is: A713100007HRBATCH
10068800
2007/06/04STSSH012.00000 A108145 00000000007.500000 A_STUDSUM
10068800
2007/06/05STSSH002.00000 A108145 00000000007.500000 A_STUDSUM ...(this is a ragid right with spaces padding out fixed width columns) THANKS for ANY light ANYONE can shed on this.
View 14 Replies
View Related
Nov 26, 2007
I have a simple CSV/XLS dump that i need to put up on the server. I would need to create a file output daily and need a variable name to identify them easily.
I have the problem of naming it in the "connection string" easily and i have tried variables and expressions too.
I am new to this so please need help.
Thanks
View 11 Replies
View Related
Jan 16, 2008
I have a zip file. How to analysis it by File Flat Connection
Assume that: zip file is result of compressing txt file
Thanks
View 6 Replies
View Related
Apr 6, 2007
Is there a way to copy a table schema into a new table rather than having to generate a create table script?For example, I have table dbo.MyTable and I want to copy the schema to newuser.MyTable without a script? I know you can restore into a new database from an existing database so maybe you can do this?thanks-c
View 3 Replies
View Related
