Recovery Data From Transaction Log
Dec 19, 2007Hi
DepartmentMaster table has been deleted
how can I retrive the data from transaction log?
thanks
Hi
DepartmentMaster table has been deleted
how can I retrive the data from transaction log?
thanks
Out of using stored procedure, reports and all this staff, I want to know the possible way to make sure that the data inside my Secondary Server Read only database are same as data in my primary server database.
So what is the simple way to do this check?
in the process of migrating a big db from server 1 to server 2, we had to roll back the change. I started with taking a full db backup and restoring it on server 2 with norecovery, and then a couple logs with norecovery, and then the last log with recovery.
Is there some way to continue this chain now, I mean to change the db to norecovery, or other way to restore logs.
I dont want to do a new full backup.
If I try to do a log restore now i get the message:
Msg 3117, Level 16, State 4, Line 1
The log or differential backup cannot be restored because no files are ready to rollforward.
Msg 3013, Level 16, State 1, Line 1
RESTORE LOG is terminating abnormally.
Coming from a (mostly) Oracle shop, I am unclear how SS transaction logswork as far as up to point of failure recovery goes.I have the few MSSQL databases I look after in full recovery mode, and Iset up maintenance plans to back these up online on a daily basis. Inthe research I did it was recommended backing up the transaction logs aswell on a frequent basis to ensure recovery to POF or point in time.I had assumed that they work like Oracles archive logs, in that oncethey are full they are archived to disk in case they are needed, toduplex destinations if need be. Does SS do this, or do I need to bebacking up transaction logs on an hourly (or shorter) basis? In lookingat enterprise manager I see that it does not look like the transactionlogs are archived anywhere, but overwritten once filled up, similar toOracle noarchivelog mode, in that if you lose your online redo logs oranyone of them has recycled since your last backup, then you can onlyrecover to the last good backup.Is this a correct assumption? Should I be backing up transaction logshourly to make sure I can have PIT or POF recovery?thanksTG
View 3 Replies View RelatedUSE [master]
RESTORE DATABASE [EmployeeRecovered] FROM DISK = N'D:BackupsNormalEmployeeFULL.BAK' WITH FILE = 1,
MOVE N'Employee' TO N'D:MSSQLDATAEmployeeRecovered1.mdf',
MOVE N'Employee_log' TO N'D:MSSQLLOGEmployeeRecovered1_log.ldf',
NOUNLOAD, STATS = 5, NORECOVERY
[Code] ....
Now I realze the recovery point is somewhere in TranBackup2.trn and need to go back to the state where only TranBackup1.trn is applied. How can i do this ?
Hi,
What is the relationship between recovery model and transaction log? How does recovery model affect txn log file size?
How to decide which model should I use?
Thank you
We're having an issue with an AG where the the log backup does not appear to truncate the log. symptoms..Run full backupRun transaction log backup DBCC Loginfo shows all VLFs with a status of 2sys.databases.log_reuse_wait_desc says LOG_BACKUPOPENTRANS indicates no open trans.All backups are being run on the primary.
View 10 Replies View RelatedLog shipping was configured 6 months back. A Transaction log file got corrupted today. How to resolve this?
View 20 Replies View Relatedhi,
we have a SQL Server 2000 database which we set to 'SIMPLE' recovery mode at 6pm (due to nightly large data loads). We revert back to 'FULL' recovery mode at 6am.
My understanding was that in 'SIMPLE' recovery mode, the transaction log would not grow because it would automatically be truncated after a checkpoint. However this is not the case. I thought perhaps it could be due to a long running uncomitted transaction, but when I ran 'dbcc opentran', the oldest running transactions doesn't last for more than a couple minutes. I manually run a 'checkpoint' command as well in the hope of forcing the transaction log truncation. I repeat this a couple of times to no avail. When I run 'dbcc sqlperf(logspace)' , I can still see the transaction log growing.
It is not until I run 'backup log db with truncate_only' that the transaction log gets truncated.
I do not understand, why the transaction log does not get automatically truncated in SIMPLE recovery mode?
Andrew
My trancaction log is 25GB and my database file is 39GB. I justswitched to the 'Simple' recovery model from the 'Full' recovery model.When if ever can I expect the size of the transaction log to reduce insize? Is there anything else that I should do to aide with thereduction?Thanks,Peter
View 5 Replies View RelatedI've got log shipping set up, and everything seems to be working fine, but the log files are not being deleted from the primary server despite configuring log shipping to retain them for 3 days. I see no errors concerning the log shipping, but did not configure a monitor. What process is responsible for deleting the older log backups, and how can I look for errors. I could simply set up a jog to delete the older files, but that will only mask the issue.
View 3 Replies View RelatedOne of our production databases was setup mirroring, log shipping and replication on it, the log file was setup unrestricted growth. This morning one index rebuilding process generated lots of logs, and the log file disk ran out of space, the database was in recovery mode. so we had to disable log shipping, pause mirroring and replication, expand log file disk, restarted SQL instance to fix the issue. Now we want to setup the log file to maximum size 80G, the whole log file disk is 120G.
So if the log file reached 80G next time, we can change the max size to 90G or 100G and it's easier to fix the space issue. My question is, if the database log file reached max size,
1. is the database still available?
2. Will the active session causing the issue be rollback to release space back?
Is there a clean way to block access to a peer which has been offline, during peer-to-peer transaction recovery (while the outstanding transactions are being applied)?
Thanks, Liston
Hi,
I have SQL 7.0, SP2 running on NT 4.0 with SP5. I have a central publisher and
numerous subscribers using nightly merge push replication. There seems to be some
problem with the rollback after a failed attempt at replication. The publisher
states that there was no response from the sub database and that it was suspect.
From the sql logs on the sub, I can see that the db went into recovery mode,
recovered 100%, howerver all the data in the subscribing database has disappered.
The schema of all the tables is intact and the database still reads at its old
size ~2Gigs. I can't see the data though. The publisher or other subscribers have
suffered no similar loss of data. It seems that there was some sort of error when
the database was trying to rollback to where it was before the attempted
replication. Has anyone experienced anythng similar? Anyone know how I can
recover the data?
I ran a dbcc checkdb, but it reported no errors, saying that there were no rows
in any of my replicated tables.
Any help / suggestions are appreciated.
JC
.
Hi All!
I made a big mess recently and i need an urgent help. We have 12 months of our company data located in 2 sql servers out of which one server contains 9 months of data (Say A)and another contains 3 months of data (Say B).
The server which contains 9 months data was taken a backup in June 1st week and this is the last backup to the databae in this server.
Now i have tried to append the 3 months data to the 9 months data. So i selected the export option of the B and overlooked the option of "Delete destination objects first".
This creared the disaster. It deleted all our 9 months data in A and wrote down the 3 months data in B.
Now i need to receover the 9 months data in A which was deleted.
Any help please.
I tried with Logexplorer evaluation version but it permitted me to only Northwind and Pubs database.
And also i have tried some other tools like MS SQL Recovery but as evaluation products they didnt helped me completely.
Please let me know if you have any other ideas.
Iam in complete risk, now. :(
Regards,
Satish.
hi,
we are working on SQL server the tables got accitental deleted .we also dont have a back up of the database If anyone can please help me out with how to get back the data
Hi there,
IS it possible to recover the database from .Dat files? If we only have the Device files of the old database. Can we import it(Atleast the data in the tables) into the new server?
Thanks in advance
To the point....My company received a disc containing our last year's databaseinformation from the online company that we use for our documentation(They use SQL ). Only thing is, we are a small business and do not havea "server", therefore we do not have sql server, therefore we can't getour documentation off of the disc. The thing is, we're beingaccredited next week and I need this information for accreditationpurposes. I need to know if there is another option to retrieve thisinformation without purchasing Microsoft Server and SQL Server.any advice / help would be much appreciated.CRS
View 6 Replies View RelatedWe have a requirement to build SQL environment which will give us local high availability and disaster recovery to second site. We have two sites- Site A & Site B. We are planning to have two nodes at Site A and 2 nodes at Site B. All four nodes will be part of same Windows failover cluster. We will build two SQL Cluster, InstanceA will be clustered between the nodes at Site A Server and InstanceB will be clustered between the nodes at Site B, we will enable Always On Between the InstanceA and InstanceB and will be primary owner where data will be written on InstanceA and will be replicated to InstaceB. URL....Now we want we will have instanceC on the Site B and data will be writen from the application available on Site B, will be replicated to the instance on the Site A as replica.
View 6 Replies View Relatedis bulk logged recovery model support point in time recovery
View 9 Replies View RelatedPages on a full recovery model database corrupted, need to ensure data loss is minimal for restore operation am thinking about restoring the latest full backup.
View 4 Replies View RelatedI am a newcomer for SQL Server. Yesterday my NT was down, and had to be reinstalled. Therefore SQL Server 7 used has to been reinstalled too. Though old data files for SQL Server still exists, however, reinstalled SQL Server 7 cannot use them directly. I just wonder if there are any method or utility that are able to recover those previous data? Thanks very much in advance.
View 1 Replies View RelatedI have a client with a badly corrupted SQL database including things like errors in pages where sysindexes resides among many others. They do not have a good backup. I have had First Advantage Data Recovery Services (www.datarecovery.net) evaluate the database and quote to repair (over $7500).
Does anyone have any experience or reccomendations they can share about this or other companies that provide data recovery services for SQL databases?
We have 3 replica AG setup. 2 replicas are in sync/automatic failover, the other(DR Server, different subnet) in asynchronous/manual mode…All these replicas were on sql server 2012, Recently we upgraded DR server to 2014. Since then we have a problem, the AG databases in 2014 instance went into ‘Synchronizing/ in recovery’ state…The SQL server error log has message, the recovery couldn’t start for the database ‘XYZ’…We tried to create a new database and add it to AG , it works for fine for other two 2012 replicas, but on 2014 we see the same issue
View 3 Replies View RelatedHi
I am trying to recover a set of tables with data that was dropped. This data was not backed up. Please advice, is there any way this data can be recovered.
Hello,
Any body helop me in such respect that my log file was corrupt. I have mdf file only. Is there any tool to recover data from mdf file or export data to any other db.
thanks
Mansoor .net developer
SQL Server 2008R2: Enabling Change Data Capture on a replicated database or its tables will have any performance impact on existing transactional replication.Is it possible to use both of them con temporarily.
View 5 Replies View RelatedMy client has on a physical server (A), the following:
1. MS SQL Server 2008R2
2. MS SQL Server (Reporting Server)
The data base is backed up fully daily to another physical server (B).
What the client would like to do is:
1. Backup just the Raw SQL Data with Tables and Views to Server B every 10 mins
Point to be noted is, there isn't any dedicated storage (NAS or SAN) just local disk storage on the server.
The reason for this is they want to run reports against this data every 10-15 mins...
How and what do I need to do to facilitate this?
Hello there
I have a SSIS 2005 DTSX Package which has several Data flow tasks which directly dump data between tables from 2 different databases.
Suppose if my destination database is named, DestinationDB, what recovery model should I select for this database so that my ldf file size does not explode? I want to keep the ldf file as small in size as possible.
Currently I have used Simple Recovery model, and the ldf file size goes to around 80 GB. (Inserting around 200 million rows)
Will Bulk Logged model be a better option?
Also what does a SSIS 2005 Data flow task use internally? (Insert operation or some sort of Bulk Insert between DBs)
Please help.
We have an issue with a 3 node SQL 2012 Always on availability group. Normal operation is node 1 (primary replica) with node 2 and node 3 as secondary replicas.After some patching, SQL wasn't running on node 1 hence the AG flipped over to node 2. This went unnoticed for some time and the transaction log for one of the AG databases became full on node 2 and node 3. (I think this is because it couldn't commit the transactions on node 1 so couldn't truncate it's t-log?) The DB is using synchronous replication btw.So I started SQL on node 1 and flipped the AG back to node 1 (with a data loss warning but I accepted this).Now the issue is that on node 2 and 3, the DB in question is stuck in a "Reverting / In Recovery" State. I've tried various commands such as ALTER DATABASE SET ONLINE, RESTORE DATABASE WITH RECOVERY etc but these fail stating unable to obtain a lock on the DB.
The weird thing is that on node 1 the state of the DB is "synchronised".how to resolve this issue on node 2 and 3? I've left them overnight (in case they were rolling back transactions, the DB is fairly large) but nothing seems to have happened. remove the DB from the AG in node 2 and 3 and add it back in again, ie recreate the replication?
Hi All
I'm getting this when executing the code below. Going from W2K/SQL2k SP4 to XP/SQL2k SP4 over a dial-up link.
If I take away the begin tran and commit it works, but of course, if one statement fails I want a rollback. I'm executing this from a Delphi app, but I get the same from Qry Analyser.
I've tried both with and without the Set XACT . . ., and also tried with Set Implicit_Transactions off.
set XACT_ABORT ON
Begin distributed Tran
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1 and DONE = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
COMMIT TRAN
It's got me stumped, so any ideas gratefully received.Thx
I have two production servers in the same data center. I need to ensure that database remains available if a catastrophic server failure or a disk failure occurs. I need to maintain transactional consistency of the data across both servers. I need to achieve these goals without manual intervention. I was suggested to use this optionTwo servers configured on the same subnet. SQL Server Availability Group configured in Synchronous-Commit Availability Mode<<<<But I think the correct answer should be Two servers configured in Windows Failover Cluster in the same data center SQL Server configured as a clustered instance<<<<
View 2 Replies View RelatedI am in problem that I have delete data in my production table.
Now how to retrieve it?
I have only Yesterdays Full and Transaction Backup files.
I used the following query for deleting all data.
delete from t1;