Recovery Many Databases
Oct 9, 2007Hello!
I make a full backup of many databases (about 45).
How can I recovery all databases at once? With a script?
I use SQL Server 2005.
Thanks
ezinsi
ADVERTISEMENT
Recovery :: AG Databases Went Into Synchronizing / In Recovery After Upgrading To 2014
Sep 19, 2015We have 3 replica AG setup. 2 replicas are in sync/automatic failover, the other(DR Server, different subnet) in asynchronous/manual mode…All these replicas were on sql server 2012, Recently we upgraded DR server to 2014. Since then we have a problem, the AG databases in 2014 instance went into ‘Synchronizing/ in recovery’ state…The SQL server error log has message, the recovery couldn’t start for the database ‘XYZ’…We tried to create a new database and add it to AG , it works for fine for other two 2012 replicas, but on 2014 we see the same issue
View 3 Replies View RelatedListing Recovery Modes On Databases With SP Or T-S
Mar 20, 2007I need to display the recovery mode of ALL databases on a server into a table. (Just like the sp_helpdb prcedure extended with the recoverymodel of each Database).
Can anyone give me a hint on this or provide me with a little tsql code snipplet to realize this?
Thanks alot in advance
Backup/recovery Larger Databases...
Apr 10, 2008Greetings all and thanks for reading this post.
Here is my situation... I have 2 fairly large databases. Full backups are 83gb & 63gb. I am in the process of moving these database to a new data center. I've taken full backups of these databases and shipped them to the new center. I have been taking transaction log backups (larger db every 24 hrs smaller db every 15 min ... from log shipping).
I want to restore these databases in the new data center. I've gone ahead and restored the dbs in the new location.
Question final cutover.. can I just apply the transaction logs to the databases on final cut-over or do I have to restore the database backup first then apply the transaction logs?
Is there an other way to do this that I'm missing?
Thanks.
Kurt
Recovery :: Enabling TDE On Databases Which Are Used For Log-shipping
Sep 16, 2015I have log shipping enabled on databases(primary and secondary) and works fine. I need to implement TDE on the database. I have experience on implementing TDE on databases which are not used for log-shipping.steps needed to setup TDE which are involved with log-shipping.
View 2 Replies View RelatedSystem Databases In Full Recovery Mode
Mar 6, 2006Hi
What are the pros and cons of putting the system databases in full recovery mode
I am asked by my manager to keep everything simple and uniform.We have all the user databases in Full recovery mode and he wants all the system databases as well to be full recovery mode.
I would like to get the points where in i can argue that, there is no point in having the system databases in full recovery mode.Unfortunately i dont see anything related to this in BOL or internet.
Plz help
Thanks
Sreenath
WRITELOG Lock On Databases Set To SIMPLE Recovery
Jul 23, 2005Hi All,I have a 2MB database set to SIMPLE recovery. This database is usedonly to generate new keys to web users. It has two columns - UID andLASTDATE. The UID column is only updated when users log in or log out(INSERT & DELETE). The LASTDATE column is updated every time theyswitch between pages.Please don't ask for the reason why we do it this way, it just IS.The maximum amount of rows in this table at any given time is about2000. There is a non-clustered index on the UID column.My problem is that all throughout the day I have constant blocks by theWRITELOG waittype. I know my disk I/O is very slow (will be upgradedsoon) but this is the only database on which these blocks occur. Whatis writing to the transaction log if I have the DB set for SIMPLErecovery?Thanks,Josh
View 4 Replies View RelatedNew Databases Defaulting To The Simple Recovery Model
Feb 8, 2008When I create a database, is there a way to make sure that the default recovery model is Full instead of Simple?
View 1 Replies View RelatedRestore SQL Server Express Databases After A Disaster Recovery
Sep 15, 2006Hello,
I would like to restore SQL Server Express and its databases from a tape backup to the same server. This is a disaster recovery senario.
I backed up the Master, Model, MSDB and my own test database using SQLCMD scripts. I have no problem restoring these using task manager on the server before the disaster recovery.
However, in my real disaster recovery testing, When the server is restored by tape drive (HP one button disaster recovery), I try to run my SQLCMD restore scripts in task manager and I cannot connect to the sql server. Also I cannot connect with Management studio. I have recieved the following error in event viewer.
----------------------------------------------------------------
Event Type: Error
Event Source: MSSQL$SQLEXPRESS
Event Category: (2)
Event ID: 3411
Date: 9/15/2006
Time: 8:16:36 AM
User: N/A
Computer: COPLEYNEWS
Description:
Configuration block version 0 is not a valid version number. SQL Server is exiting. Restore the master database or reinstall.
Data:
0000: 53 0d 00 00 15 00 00 00 S.......
0008: 16 00 00 00 43 00 4f 00 ....C.O.
0010: 50 00 4c 00 45 00 59 00 P.L.E.Y.
0018: 4e 00 45 00 57 00 53 00 N.E.W.S.
0020: 5c 00 53 00 51 00 4c 00 .S.Q.L.
0028: 45 00 58 00 50 00 52 00 E.X.P.R.
0030: 45 00 53 00 53 00 00 00 E.S.S...
0038: 00 00 00 00 ....
Event Type: Warning
Event Source: SQLBrowser
Event Category: None
Event ID: 3
Date: 9/15/2006
Time: 8:16:36 AM
User: N/A
Computer: COPLEYNEWS
Description:
The configuration of the AdminConnectionTCP protocol in the SQL instance SQLEXPRESS is not valid.
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7024
Date: 9/15/2006
Time: 8:16:36 AM
User: N/A
Computer: COPLEYNEWS
Description:
The SQL Server (SQLEXPRESS) service terminated with service-specific error 3411.
C:Program FilesMicrosoft SQL Server90ToolsBinn>sqlcmd -S.SQLExpr
COPLEYNEWSDATABASEscriptsMASTERFULLRESTORE.sql"
HResult 0x2, Level 16, State 1
Named Pipes Provider: Could not open a connection to SQL Server [2].
Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred whi
shing a connection to the server. When connecting to SQL Server 2005,
re may be caused by the fact that under the default settings SQL Serve
allow remote connections..
Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired.
----------------------------------------------------------------------
My question is, what is the correct procedure to follow when I want to do a disaster recovery and restore SQL Server Express from tape backup using the Simple Backup method and scripts.
Is it always required to reinstall sql server express from the original program file or is it possible to reinstall from back up tape.
I know my backup and restore scripts work because I tested them on the server before I do the disaster recovery and rebuild that server from tape.
This is some kind of issue with SQL Server Express being restored by tape backup.
Any suggestions, thanks.
Recovery :: How Many Databases Can Be Configured In Log Shipping From A Single Instance
May 1, 2015SQL Server 2012: Out of all the databases in the instance we have a requirement in which we need to maintain a high availability for the databases around (128). Our team believed log shipping will apt for this requirement but not sure on it's limitations, how many databases are allowed or supports this log shipping from a single instance.
View 7 Replies View RelatedRecovery :: Maximum Number Of Databases That Are Supported In AlwaysOn?
May 13, 2015I believe to configure maximum number of replicas it is required to have 5 nodes (1 Primary & 4 Secondary replicas). But how many databases can be included in one availability group, it think it is 32767. When I am referring to below URL it is mentioned something like "An availability group supports a set of read-write primary databases and one to eight sets of corresponding secondary databases. " What does this 'sets' means, is that maximum limit for only eight databases or maximum groups should be eight?
[URL] ....
Recovery :: How To Manage Data Latency On Read-only AlwaysOn Databases
Aug 27, 2015We have several read-only nodes in our AlwaysOn cluster, which are set to use Synchronous-commit mode, which ensures that the logs are updated on the read-only nodes before any update statements complete. Even with this option, if we query a read-only node before the logs have been processed, we can read old data. I would like to know a strategy to ensure that a read-only query will definitely return up to date information. I had an idea that if I just used a different transaction type, like Serializable, that it might block the read-only query from actually getting the data until after the log file was processed, but I have not tried it, yet.
I would like to move more queries to the read-only nodes, in an effort to offload CPU utilization from the primary node.
Best Disaster Recovery Plan For System Databases(Master,MSDB...)
Nov 20, 2007Hi all
What is best Disaster/Recovery methode to securing the system databases.
Master database allows only Full backup
MSDB allows Full ,Diff
Recovery :: How To Find Last Login Date / Time For User DML Activity On Databases On Instance
Jun 22, 2015How to find last login date/time for user DML acitivity on databases on Instance?
Is there any way we can find our the last login date/time for databases?
Note: 1. We can find if the SQL Trace is running and store.This is not good solution
2. Audit logins off/on is also not good solution.
3. Using DMV's also not good option, if reboot sql server instance then historical values can not see.
Recovery :: Server Local High Availability Using Failover Cluster And Disaster Recovery Using AlwaysOn
Aug 17, 2015We have a requirement to build SQL environment which will give us local high availability and disaster recovery to second site. We have two sites- Site A & Site B. We are planning to have two nodes at Site A and 2 nodes at Site B. All four nodes will be part of same Windows failover cluster. We will build two SQL Cluster, InstanceA will be clustered between the nodes at Site A Server and InstanceB will be clustered between the nodes at Site B, we will enable Always On Between the InstanceA and InstanceB and will be primary owner where data will be written on InstanceA and will be replicated to InstaceB. URL....Now we want we will have instanceC on the Site B and data will be writen from the application available on Site B, will be replicated to the instance on the Site A as replica.
View 6 Replies View RelatedSQL Server Admin 2014 :: Is Bulk Logged Recovery Model Support Point In Time Recovery
Dec 23, 2014is bulk logged recovery model support point in time recovery
View 9 Replies View RelatedRecovery :: Pages On A Full Recovery Model Database Corrupted
Sep 17, 2015Pages on a full recovery model database corrupted, need to ensure data loss is minimal for restore operation am thinking about restoring the latest full backup.
View 4 Replies View RelatedTransact SQL :: Change Db In Recovery To No-recovery And Restore Transaction Log?
May 5, 2015in the process of migrating a big db from server 1 to server 2, we had to roll back the change. I started with taking a full db backup and restoring it on server 2 with norecovery, and then a couple logs with norecovery, and then the last log with recovery.
Is there some way to continue this chain now, I mean to change the db to norecovery, or other way to restore logs.
I dont want to do a new full backup.
If I try to do a log restore now i get the message:
Msg 3117, Level 16, State 4, Line 1
The log or differential backup cannot be restored because no files are ready to rollforward.
Msg 3013, Level 16, State 1, Line 1
RESTORE LOG is terminating abnormally.
Recovery :: AG Database In Reverting / In Recovery State
Nov 1, 2015We have an issue with a 3 node SQL 2012 Always on availability group. Normal operation is node 1 (primary replica) with node 2 and node 3 as secondary replicas.After some patching, SQL wasn't running on node 1 hence the AG flipped over to node 2. This went unnoticed for some time and the transaction log for one of the AG databases became full on node 2 and node 3. (I think this is because it couldn't commit the transactions on node 1 so couldn't truncate it's t-log?) The DB is using synchronous replication btw.So I started SQL on node 1 and flipped the AG back to node 1 (with a data loss warning but I accepted this).Now the issue is that on node 2 and 3, the DB in question is stuck in a "Reverting / In Recovery" State. I've tried various commands such as ALTER DATABASE SET ONLINE, RESTORE DATABASE WITH RECOVERY etc but these fail stating unable to obtain a lock on the DB.
The weird thing is that on node 1 the state of the DB is "synchronised".how to resolve this issue on node 2 and 3? I've left them overnight (in case they were rolling back transactions, the DB is fairly large) but nothing seems to have happened. remove the DB from the AG in node 2 and 3 and add it back in again, ie recreate the replication?
Recovery :: How To Do A Full Disaster Recovery
Sep 10, 2015If you are doing a disaster recovery of an entire SQL 2005 cluster, can you just install SQL server and restore the system database to get the configuration?
View 4 Replies View RelatedLinking Tables From Different Databases Or Querying From Multiple Databases
Dec 10, 2007Dear Readers,Is it possible, like in Access, to link to tables in other SQL databases that are on the same server? I have a query that I originally had in Access that queered from multiply databases. It did this by having those other tables in the other databases linked to the database that had the query.
Service Broker Not Working For Restored Databases (SQL 2000 Databases Restored On 2005)
Jan 24, 2006I just restored my SQL server 2000 database on the SQL server 2005. after this i ran the Service broker sample ("Hello World") on this database by changing the AdventureWorks name to the new database name. The "setup.sql" runs fine. When i run the "SendMessage.sql" i was not getting any rows in the output (The message was not getting inserted into the queue). I checked the Service broker is enabled on this databased using the query "select is_broker_enabled from sys.databases where name = 'newdbname' " It was 1. I even tried the ALTER DATABASE SET ENABLE_BROKER. but it didnt work.
When i tried the sample on a newly created database it worked fine.
Is there any solution to make the restored database to work for service broker.
Thanks
Prashanth
Copying Databases Between Databases
Feb 8, 2000hi from France !!!
i would like how to duplicate a database to another server with all datas, constraints, keys, indexes...
should i use sp_attach_db, dts, backup/restore, sql scripts... ???
thanks to all, nico
SQL DB Recovery
Jun 14, 2007Please help!
Windows Server 2003 SE
SQL 2000 w/ 4
Veritas Netbackup 5.1 w/ MP5 (for backup/recovery)
Sometimes, not always, when I attempt to recovery a database I will follow the process of restoring the DB and it will complete with a status of successful. However when I attempt to view the DB in Enterprise Manager it states (loading) next to the DB - and never finishes.
As I said, this doesn't happen all the time, but of course when it happens I only know to start over, rebuild everything and go through the recovery process again. I am sure this is something simple.
I apologize for my lack of knowledge in regards to SQL.
Any insight greatly appreciated.
Thanks,
Kerry
Recovery
May 19, 2008Hi,
I want to drop my emp table.Is it possible to get back my emp table?
If possible pls give me the commands.
or give some useful website address
DTS Recovery
Oct 30, 2007I have removed a SQL Server 2000 installation, as need to re-install the OS also backed up the whole "Microsoft SQL Server 2000" folder that contains all the MDF and LDF files of the DBs.
Now i also had some DTS packages there but now when i have re-installed the whole setup; i could not get the DTS packages. Is there anyway to recover the DTS as i have the whole folder that contains the SQL Server information. DBs are attached again but only the DTS are left. There must be some place where SQL Server stores this information.
Can anyone please help me out as its so urgent for my work.
Thanks!
In Recovery?
Apr 24, 2008After a crash while running a query, the database now has (In Recovery) next to its name and is totally unaccessible. How long does this is last? Is there something I should do about it or do I just wait?
View 5 Replies View RelatedRecovery..
Feb 22, 2008hi.. how do i create a log entries with checkpoint for each transaction when accessing and updating the database?
i want to recover the data if in case of emergency....
also how do i check whether it has emergency during my project testing? haha.. i got an idea of switching of the electricity.. hahaha how should i do actually?
Disaster Recovery
Feb 23, 2004Hello,
I have a problem. I am trying to set up a disaster recovery plan and have ran into some problems. Just so you are aware, we have tried setting up replication but it failed since the database does not have primary keys(don't ask--I have no control) and we have tried to set up log shipping but we do not have the Enterprise version of SQL server so that won't work. The database is over 200GB so shipping by tape or transferring full backups across the wire is impractical. So basically my question is - "What other options can we explore for setting up disaster recovery that do not involve 'substantial' expenditures?"
There is a direct connection set up between the off site data store.
Thanks
Data Recovery??
May 14, 2001Hi,
I have SQL 7.0, SP2 running on NT 4.0 with SP5. I have a central publisher and
numerous subscribers using nightly merge push replication. There seems to be some
problem with the rollback after a failed attempt at replication. The publisher
states that there was no response from the sub database and that it was suspect.
From the sql logs on the sub, I can see that the db went into recovery mode,
recovered 100%, howerver all the data in the subscribing database has disappered.
The schema of all the tables is intact and the database still reads at its old
size ~2Gigs. I can't see the data though. The publisher or other subscribers have
suffered no similar loss of data. It seems that there was some sort of error when
the database was trying to rollback to where it was before the attempted
replication. Has anyone experienced anythng similar? Anyone know how I can
recover the data?
I ran a dbcc checkdb, but it reported no errors, saying that there were no rows
in any of my replicated tables.
Any help / suggestions are appreciated.
JC
.
Disaster Recovery 6.5
May 11, 2000I have the Master, Msdb and User Database dumps. I want to build another server with the avilable dumps.
Please help me....
Clark
Bypassing DB Recovery
Nov 15, 2000Hey all,
Is there any that i can bypass the recovering of a particular
database when the server reboots? We are rebooting a prod. server
and we need to bypass the recovery of a particular database as
it is recovering forever. please help me out and i am gathering
the information from web as much as i can to get an idea.
thank you very much for the support
Andrew.s
Disaster Recovery
Feb 2, 2001Hi,
A test server I was developing on has died and all of my good work was on it.
However I have a copy of the Data folder containing the folloing files:
Test_Data.MDF
Test_Log.LDF
Is it possible to restore my database from these files?
If so how would I go about it?
Many thanks in advance!