I have this SSIS data flow ( Flat file to sql server) that I want to add a step to redirect any "bad" data instead of fail out.
I had the red arrow hocked up to a sql new table to dump the bad data, but the flow still failed.
Here is the first error, and I knew what was wrong. A description field in that line has pipe(|) character in it, which also happen to be the column delimiter in this case.
[Flat File Source [1]] Error: Data conversion failed. The data conversion for column "Column 22" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
I knew if I fixed the data, every thing will be fine, but I just want to use this redirect feature of SSIS. Is there a place where I can turn off validation, or do something to make it work?
I m using SSIS and i am transfering the data from Flat File Source to the OLE DB destination File. The source file contain some corrupt data which i am transfering to the other Flat file destination file.
Debugging is succesful but i am not getting any error output in the Flat file destination file.
i had done exactly which is written in the msdn tutorial of SSIS.
Plz tell me why i am not getting the error output in the destination flat file?
I am attempting to pull in data from a flat file data source that contains dates in the following format "01012007 10:22" which translates to Month Day Year and Military Time. I want to turn this into a DateTime format so that I can insert it into the proper column. I have a SQL statement which will do this (see bellow), but I can't figgure out how to run the statement on the data before it reaches its destination.
my package has a flat file source that should be extracting data from a text file passing the data to the next component in the data flow. the package validates fine, but the data isn't flowing. however, i see the data in the source component. i added a data viewer between the source and the next component to see if any data flowed and saw no data. can someone suggest how i should go about trying to debug this? thanks.
I am trying to impliment a SSIS package where data source is a Flat file(.csv) file and destination is a sql server database.
The problem is my data source a flat file which consists of thousands of rows which are manually entered, so there is always a chance that in some rows they may miss a column value while entering data which results in an error.
Example: My flat file has headers like Sln, Name, Age, Designation. While entering data they may miss age and type it as 1,aaa,Consultant,,
Using SSIS package i want to track all row number in the flat file where data is entered wrongly so that i can correct only that row instead of checking all rows each time when my SSIS package throughs an error. I want to get all the row numbers in a sql server database which are wrongly entered.
I was getting the product error associated with the full version of SSIS not installed so I ran the installation again and selected the Integration Services check box.
Now when attempting to import data into a database, the drop down list doesn't have a flat file option.
Hi All, In one of my SSIS Interface I have to Merge data from a Oledb source and a Flat file source.But after I read from the flat file I have do a basic validation of the file for the length of header,detail and trailer records and then process further.The above Validation I am doing within Script Component.If the validation fails the flow should pass out of the DataFlowTask without Initailsing the Oledb source.
But the problem is i am not able to connect anything to the Oledb source,i.e Oledb source is not taking any incoming Pointers. Earlier I had done the same Validation in Control Flow Task,but then the interface was reading the same file twice,once in the Control Flow Task and then again in the DataFlowTask.Which i should avoid now.
I hope many of you could have come across such a problem. Any help on this will be appreciated.
I'm getting a very strange potential loss of data error on my flat file source in the data flow. The flat file is fixed width and the column in question is defined as numeric [DT_NUMERIC]. The transform runs great if this column IS NOT A ZERO. As soon as a zero value is found, I get the error. It errors on the flat file source, so I haven't been able to use a data viewer to see what's going on.
Each day I receive a file with a different name. For example, the name is filename_mmddyyyy.txt where filename_ stays constant and mmddyyyy is the date of the file. The file is always in the same format.
I want to build an SSIS where I pass it this file name. I can write a script to generate the correct file name. How do I build the SSIS so it can accept the input parameter and find the correct file to process?
All, I'm having an issue with the Flat File Data Flow Source returning only a limited set of the rows that are in the flat file. Basically, I connect to the flat file fine, it goes to retrieve the data (tab delimited file) and only returns 190 of 392 rows. Is there a limitation on the # of rows this data flow source can retrieve or something? I've look all through the settings and properties of the task as well as the connection manager and nothing is obvious as to what is causing this. Hopefully someone ou tthere has run into this before and can help me retrieve all rows. Thanks in advance!
I want to use Import/Export wizard. In "Choose a data Source" screen, I can't see "Flat File" in "Data Source" List. Please help me how to insatall (or find) flat file connection manager
I am writing a package that will process delimited flat files that will come in one of a few different versions. Within each flat file, the number of delimited columns will be the same, but each version of the file has a different number of columns. I have tried configuring the flat file data source to expect the version with the largest number of columns, but it will then throw away rows that have less than this number of columns (warning: There is a partial row at the end of the file).
Is it possible to use a single flat file data source that will work with all of the different width files?
I'm having a problem using the Flat File Source while using the underlying .Net classes to execute SSIS Packages. The issue is that for some reason when I load a flat file it Empty's out columns randomly. Its happening in the Flat File Source Task. By random I mean that most of the times all the data gets loaded but sometimes it doesnt and it empty's out column data. Interestingly enough this is random and even the emptying out of columns isnt a complete empty, its more like a 90% emtpying. Now you'll ask that is the file different everytime and the answer is NO. Its the same file everytime. If I run the same file everytime for 10 times it would empty out various columns maybe 1 of those times. This doesnt seem to be a problem while working with dtexec or the Package Executor utility. Need Help!!
How do i use the foreach loop container and pass each file found according to a specified pattern to a Flat File Source in a Data Flow Task Object so i can operate on each file found in the foreach loop object instead of having to specify a static file name
I am working to archive some old data from a data warehouse using SQL server and SSIS. The data will be read and denormalized, then shipped out to a delimited text file.
The rowcount of the incoming data is significant, call it 10M+ rows per unit of work (one text file).
There are development advantages of using a stored proc for the data source - mainly ease of changing the denormalization logic as required. Wondering if there are performance advantages of an embeded query for the data source instead?
It was mentioned by one developer that when using a stored procedure, the output stream from the proc and subsequent SSIS steps cannot start until the full procedure processing is complete; i.e. the proc churns out its' result set in one big chunk.Â
He hinted that an embedded query does not have this same effect, but I am not sure that is accurate.
I'm importing a large csv file two different ways - one with Bulk Import Task and the other way with the Data Flow Task (flat file source -> OLE DB destination).
With the Bulk Import Task I'm putting all the csv rows in one column. With the Data Flow Task I'm mapping each csv value to it's own column in the SQL table.
I used two different flat file sources and got the following:
Hi everyone, I am using SSIS, and I got the folowing error, I am loading several CSV files in a OLE DB, Becasuse the file is finishing and the tak dont realize of the anormal termination, making an overflow. So basically what i want is to control the anormal ending of the csv file. please can anyone help me ???
I am getting the following error after replacing the '""' with '|'. The replacng is done becasue some text sting contains "" wherein the DFT was throwing an error as " The column delimiter could not foun".
[Flat File Source [8885]] Error: The column data for column "CountryId" overflowed the disk I/O buffer. [Flat File Source [8885]] Error: An error occurred while skipping data rows. [DTS.Pipeline] Error: The PrimeOutput method on component "Flat File Source" (8885) returned error code 0xC0202091. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
[DTS.Pipeline] Error: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0047039.
[DTS.Pipeline] Information: Post Execute phase is beginning.
I have a table that among other holds volume data. I need to calculate something called Intelligent Volume based on set of rules. After all rules were followed and I still find data that does not belong to any of the rules this data is bad and needs to be reported on (can not be discarded) I wanted to do this is sql task (insert intel. volume) and I am using Cursor to loop through all the data and all rules. How do I redirect this data to a file so we can report on those records?
I am trying to create a program that transfers tables to flat files. At this point in time, I have suceeded in created one that creates delimited files.
However, I am now trying to create fixed-width files as you can do with the SSIS designer, but programatically.
Is there a way to programatically determine the width of a column from the source table? I can not seem to find any kind of function or member that stores this information or allows me to retrieve it.
I know what I need to change in order to set a width for a column, but I just don't know how to find the width without just asking the user to provide one.
I have Flat File as my source. Before i tried to load the data in to ORACLE Destination thru SCD component the error was with ole db.
any ways i try to load the data in Access DB but I€™m getting different error in same component (OLE DB) After SCD Component. can any one help me out in this.
I have some problems with the "Flat File Source" ... I am trying to load a textfile, but IS allways cuts the rows ... When I look at the preview while designing, the row is complete, so I am wondering what IS is doing ...
I've been working 4 days non stop on this project, lost a complete weekend on it and I totally had it. Please have a look at this "simple" question:
I have a for each loop that checks for csv files in a folder. The path of the file(s) is stored in a variable varFileName. So far so good. But then I start with a data flow task and inside that data flow task I need to access one of those csv files at the time whenever it loops.
So my best guess is use a flat file source because that's the only task I see in the list that fits my question. But the thing is, you set up a connection to a....yes right, a flat source connection and there you have to select a flat file.
But no, I don't want to select ONE file, I need to access them all as the loop goes through all files. I'm sure this is something easy but I don't see it anymore.
I'm off taking a nap, need sleep Could someone please point me to a direction?
I have a SSIS package loading a lot of CSV file, which first line is the column head. Some file are ordered differently. However, package still try to load the file use predefined column order (it seems it doesn't check the head of each file see if it matchs the predefined column order).
Any way to force the package the check each file's head? or I had to manually check it using VB.Net script?
I am trying to make a SSIS package that will loop trough all files in a directory and load information from them.
I can do this with Raw File Sources since they allow me to use a variable name as the file path, but I cant seem to do the same with Flat File Sources. Is there a way to change the connection to a Flat File Source on each iteration of a loop? Actually, if this is possible with all types of file sources (like excel files) I would love to know about it too.
I was thinking about renaming the file through a script task but that does not seem like the most elegant solution so decided to see if some one here knows of a more proper way before I go that direction.
I want to read the following file using the Flat File Source flow:
10000 Router 20000 Hub 10000 Switch 30000 Server 40000 Harddisk
Spaces are used between the numbers (e.g. 10000) and the following text (e.g. Router). Each line is temrinated by a {CR}{LF} pair. I would normally think of this as a "fixed width" file.
But in the Flat File connection manager, if I use format "Fixed width", the preview shows a row width of 1 character wide (the first row contains the number "1"; the next row contains "0", and so on for the remaining 3 rows.in the first line) Not what I had in mind. How do I setup SSIS to handle this file in intended maner?
TIA,
Barker
P.S. I never had any trouble with this type of file under Sql 2000 DTS. Also, have you noticed the crappy-looking "bitmap" displayed when one wants to click and define columns for a fixed-width file?
