All,
I redirected errors the some err table I defined. SSIS package gives two columns for the error information. One is the ErrorCode, the other is ErrorColumn. But the values for those two are some numbers which I have no ideas of what it means. How to translate to some meaningful information?
Thanks a lot
I have old editions of SQL Server such as 6.5, 7.0, 2000, and 2005. The biggest hold up we have in retiring these servers is the connection string changes that would have to be made. Any way that I could redirect these calls to a newer SQL Server 2012?
View 1 Replies View RelatedHi
Is there any way to redirect results to file directly while executing query? Like in management studio we can redirect result to Text or File.(Option Result to File)
Regards
Arun.M
I'm getting some strange error handling behaviour when I tried to redirect rows when an error is encountered at the OLE DB Destination. I enabled the fastload option and set the maximum insert commit size to 10,000. My package is trying to insert 1,000,000 rows. When the row containing bad data is encountered, the entire batch is redirected to a separate table with no table constraints. So I have approx 990,000 rows of good data inserted, and approx 10,000 rows in an error table. However, only 2 of the 10,000 rows are actually bad data.
I changed the filter in the data source to reload 5 rows from the 10,000 rows of bad data. The 5 rows include the 2 rows of bad data. The fastload option and max insert commit size at the OLE DB Destination are not changed. When the package completed, 3 rows were inserted to the destination and the 2 bad rows are redirected again. Even though this is the outcome I wanted (only the real bad data is redirected), shouldn't all 5 rows be redirected since they should all be treated as a single batch?
My second question is, is there a way to get the best of both worlds - be able to load lots of data as fast as possible and only redirect the rows that are actually bad?
Thanks.
Hi,
I am developing a package which takes data from SQL Server 2005 and hits the JDE files.
In this package I need to send error mail when anyrow returns failure on OLE DB Command component which calls JDE Stored Procedure. So I created a script component which takes error output (red arrow) from OLE DB Command component. But whenever error is triggered, this is not redirecting the rows to script component even though I configured Error output as "Redirect Row". Can anyone please tell me how to redirect error to a script component?
Is there a method in SQL Server 2k to re-locate the physical databasefiles at the time the server reboots. Currently, the only way I know todo this is by scripting some OS-level commands.Thanks in advance for your help.Amy BoydDatabase AdministratorNetwork Associates*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedIs it possible within SQL Express stored procedures to redirect Print statements, along with other output messages to file?
In the following example I would like to redirect the output to a file (text or XML):
PRINT 'Droping Class Type Data Object...'
DROP TABLE ClassTypeRef
Output to Messages which I would like to redirect to a file:
Droping Class Type Data Object...
DROP_TABLE - dbo.ClassTypeRef
Thanks in advance,
Mark
I recently updated the datatype of a sproc parameter from bit to tinyint. When I executed the sproc with the updated parameters the sproc appeared to succeed and returned "1 row(s) affected" in the console. However, the update triggered by the sproc did not actually work.
The table column was a bit which only allows 0 or 1 and the sproc was passing a value of 2 so the table was rejecting this value. However, the sproc did not return an error and appeared to return success. So is there a way to configure the database or sproc to return an error message when this type of error occurs?
I have a parent package that calls child packages inside a For Each container. When I debug/run the parent package (from VS), I get the following error message: Warning: The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
It appears to be failing while executing the child package. However, the logs (via the "progress" tab) for both the parent package and the child package show no errors other than the one listed above (and that shows in the parent package log). The child package appears to validate completely without error (all components are green and no error messages in the log). I turned on SSIS logging to a text file and see nothing in there either.
If I bump up the MaximumErrorCount in the parent package and in the Execute Package Task that calls the child package to 4 (to go one above the error count indicated in the message above), the whole thing executes sucessfully. I don't want to leave the Max Error Count set like this. Is there something I am missing? For example are there errors that do not get logged by default? I get some warnings, do a certain number of warnings equal an error?
Thanks,
Lee
Starwin writes "when i execute DBCC CHECKDB, DBCC CHECKCATALOG
I reveived the following error.
how to solve it?
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -2093955965, index ID 711, page ID (3:2530). The PageId in the page header = (34443:343146507).
. . . .
. . . .
CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1635188736)' (object ID -1635188736).
CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1600811521)' (object ID -1600811521).
. . . .
. . . .
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -8748568, index ID 50307, page ID (3:2497). The PageId in the page header = (26707:762626875).
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -7615284, index ID 35836, page ID (3:2534). The PageId in the page heade"
When using the following format & .cmd file keep getting this error . . .
DB-LIBRARY error:
Unexpected EOF encountered in BCP data-file.
Have checked the .fmt & .cmd files & also the table layout that the data is being loaded into. Any help would be appreciated.
FMT File
6.0
28
1 SQLCHAR 0 30 "" 1 UserName
2 SQLCHAR 0 32 "" 2 Password
3 SQLCHAR 0 8 "" 3 PasswordExpirationDate
4 SQLCHAR 0 2 "" 4 HintQuestionID
5SQLCHAR 0 25 "" 5HintAnswer
6SQLCHAR 0 40 "" 6EmailAddress
7 SQLCHAR 0 1 "" 7MarketingEmailInd
8 SQLCHAR 0 1 "" 8 StatusEmailInd
9 SQLCHAR 0 30 "" 9 FirstName
10 SQLCHAR 0 30 "" 10 LastName
11 SQLCHAR 0 1 "" 11MiddleInitial
12 SQLCHAR 0 3 "" 12 Suffix
13SQLCHAR 0 9 "" 13SSN
14SQLCHAR 0 8 "" 14DOB
15SQLCHAR 0 1 "" 15 CustType
16SQLCHAR 0 1 "" 16GradeLevel
17SQLCHAR 0 1 "" 17 SharedComputerInd
18SQLCHAR 0 8 "" 18 SchoolCode
19 SQLCHAR 0 2 "" 19CampusCode
20 SQLCHAR 0 50 "" 20 SchoolName
21 SQLCHAR 0 8 "" 21 SchoolLastVerfiedDate
22 SQLCHAR 0 8 "" 22 DateCreated
23 SQLCHAR 0 8 "" 23 LastLoginDate
24 SQLCHAR 0 4 "" 24 LoginCount
25 SQLCHAR 0 4 "" 25 BadLoginCount
26 SQLCHAR 0 1 "" 26 Status
27 SQLCHAR 0 30 "" 27 LastModifiedUser
28 SQLCHAR 0 8 ";
" 28 LastModifiedDate
CMD File
BCP DEVL_CUSTOMER_DB..tblRegistered_Users_TempX in T:custbasedataincomingRegistered_User.txt /f T:custbaseapplsqlcpbuser.fmt /e T:custbasedata
eportsbuseri.err /o T:custbasedata
eportsbuseri.out /b 1000 /SDataserverjmk /User /Password
I have been receiving 644 errors on an index for one of my tables. We have dropped and rebuilt the index. Even BCP out, drop the table, create the table and BCP in everything and still have problems.
Has anyone else experienced problems with 644 errors? Did you ever determine the cause and are they any preventative ideas?
TIA
I get this error when i try to modify or fix a job
Cannot add, update, or delete a job(or ists steps or shcedules) that aoriginated from an MSX Server.
error 14274
Why is this? Any ideas. I checked the sysjobs in the msdb and they have the correct server name for the jobs?
Ok, whenever I try to connect, I get the following Error messages:
"SQL Server Registration failed because of the connection failure displayed below.
SQL Server does not exist or access denied.
ConnectionOpen (Connect())"
"An Error 1069 occured while performing this service operation on the
MSSQLServer Service"
I even went as far as uninstalling and reinstalling, but to no avail. Does anyone have an idea what's causing this? It was working fine and then all the sudden one day I start getting these messages and it won't work.
Thanks!
Smitty
I have a dynamics db that is used for archival purposes and it is not used very often. Now that someone decided to get some info out of it it wont let them. when I run dbcc I get the following message:
Msg 5242, Level 16, State 1, Line 1
An inconsistency was detected during an internal operation in database 'PACIF'(ID:12) on page (1:19451). Please contact technical support. Reference number 6.
Msg 8921, Level 16, State 1, Line 1
Check terminated. A failure was detected while collecting facts. Possibly tempdb out of space or a system table is inconsistent. Check previous errors.
I was just wondering if this meant anything to any of you? and since all of my backtapes have the same issue, is there any way to fix it?
thanks in advance.
Failer to generate user instance is the error.
View 1 Replies View Related
Running SQL 05 Standard on a Vista box and I have about had it with Vista. Anytime I try to launch Config Manager I get Cannot connect to WMI provider. You do not have permission or the server is unreachable. So try I googled and tried everything I can fine from http://blogs.msdn.com/echarran/archive/2006/01/03/509061.aspx
C:Program FilesMicrosoft SQL Server90Shared>mofcomp "C:Program FilesMicrosoft SQL Server90Sharedsqlmgmproviderxpsp2up.mof" and now I get ..
An error occurred while processing item 10 defined on lines 73 - 79 in file C:s
qlmgmproviderxpsp2up.mof:
Error Number: 0x80041003, Facility: WMI
Description: Access denied
Compiler returned error 0x80041001
so I try every possible different permission setting for anything sql server - problem still happening... try procmonitor.. find the registry keys and grant full contorl to all of them.. problem still happending.. run the little fixwmi.cmd I found.. problem still happening..
try to uninstall SQL Server.. NOT - WMI error - try to reinstall over--- NOT WMI error.
What do I need to do to get this working. .this is becoming a serious hinderance to my productivity!!!
what a want to know is if there s a way to log sql server errors on a log file, table, these errors are not sql server logs which already exists, i want to log dead locks, sql server timeout errors vs on sql server or somewhere.
is it possible ?
may i use sql server profiler for that purpose?
thx in advance..
Hi Expert,
I have a datagrid which is filtering by a dropdownlist and a search textbox.
The dropdownlist allows to select the column they want to search.
The search textbox allows to enter the item they want based on the selection from dropdown.
Now I use a StoreProcedure to select the data they need, so I pass-in @DropDownListValue int and some others parameters, such as @ID int, @OrderType varchar(50) ... When I search for ID = 163
Input string was not in a correct format.
Then when I check with the SQL Server Profiler, I found out that:
exec usp_SelectOrder@DropDownListValue=N'1',@ID=N'163',@OrderType=N'163',@OrderSeries=N'163' ...
I already set every parameter's default value to NULL. How can I solve for this? Thanks!!
Why on earth is this not working, It WILL insert if there are NO apostheres (" ' "), but if I say like, "Cedric's Group" It will error out. I thought this approach was suppose to handle this character?
Thanks for any insight, String sqlStr = "Insert into cardgroups (username,groupname,insertdt,groupid) values (@username,@groupname,@insertdt,@groupid)";
SqlCommand cmd = new SqlCommand(sqlStr, connect);
cmd.Parameters.AddWithValue("@username", Session["memberusername"].ToString());
cmd.Parameters.AddWithValue("@groupname",this.namebox.Text.ToString());
cmd.Parameters.AddWithValue("@insertdt", DateTime.Now.ToString());
cmd.Parameters.AddWithValue("@groupid", myGroupStr);
connect.Open();
cmd.ExecuteNonQuery();
connect.Close();
Imports System.Data.SqlClientImports System.DataImports Microsoft.SqlServerPartial Class _Default Inherits System.Web.UI.Page Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click End Sub Protected Sub TextBox3_TextChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles TextBox3.TextChanged End Sub Protected Sub SqlDataSource1_Selecting(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.SqlDataSourceSelectingEventArgs) Handles SqlDataSource1.Selecting End Sub Protected Sub Save_Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Save_Button1.Click Dim conn As New SqlConnection() conn.ConnectionString = Data Source=REDSTONE;Persist Security Info=True;User ID=******;Password=******;Unicode=True End SubEnd Class
End of statement expected. C:Documents and SettingskasireddyMy DocumentsVisual Studio 2005WebSitesBankCustomerInfo.aspx.vb
'System.Data' is a namespace and cannot be used as an expression. C:Documents and SettingskasireddyMy DocumentsVisual Studio 2005WebSitesBankCustomerInfo.aspx.vb
C:Documents and SettingskasireddyMy DocumentsVisual Studio 2005WebSitesBankCustomerInfo.aspx.vb
Hello to all,
On my webPage I have Used one SQLDataSource to access DataBase. Now whenever some error occures it shows error page by default. I am not able to catch Errors and tackle in my way...
Furthermore in this new structure of accessing DataBase even I do not know where to write Try... Catch...
Hi,
Well there's always a first for everything!! I have a SQL 7.0 server on sP1
and ran upgrade to sp3 and recieved error 'error in upgrade script' retry or cancel. When I retried the upgrade ended. I tried to run the upgrade again and it tries continue where it ended before, but the upgrade ends unsucessfully. I even tried extracted the sp3 exe to a diffrent folder and ran the sp3 upgrade with same results.
I started the MSSQL service ok but not able to use Query Analyzer, DTS, EM.
Get the following message:ISQL.EXE - Entry Point not found. The procedure entry point?DeleteRow@CDataCTLStorage@@UAEJJPAPAG@Z could not be located in the dynamic link library SQLGUI.dll
I get similar msgs when trying to open DTS, Enterprise manager from the server. The user databases and appear to be ok. I am able to get to Query Analyzer, etc. from my worksation fine.
Has anyone encountered this before? Is there a fix for it or do I need to rebuild the server from SP1 and restore the databases, etc.??
Thanks Much,
Steve Bajada
Senior DBA
It gives following errors
1.time out
2.general network failure
* Are these due to large number of online connnections
*If so what is the maximum number of connections possible
*what is the hardware requirement to avoid this
*what is the impact on stored procedures
*How to tune the server to overcome the problems
*I'm currently using the standard edition what is the impact on enterprise edition
Hi,
Over the last few weeks we've been having problems with a particular table in our live OLTP database - dbcc checkdb has been reporting consistency errors.
Initially i took the db offline and fixed the errors using checkdb and replacing the deleted records from a backup of the table. After some investigation it appeared that the errors were being caused when the unique clustered index on the table was rebuilt during weekend maintenance. After a lot of testing i was sure this was the case - so i just deleted the index (the table is small and was over-indexed anyway) and the errors stopped occurring. I didn't understand why the errors had occurred in the first place, and i wasn't convinced that the index was the real problem, but the errors had gone - so that was ok for the short term.
A few things still bugged me:
1. For audit purposes we maintain a copy of the table in question (populated via triggers on the live table) and this showed up consistency errors too. This led me to suspect the problem was with the data itself or the structure of the table - unfortunately there's nothing remarkable about this small, rarely updated table at all (apart from the fact that it's vital for our business!).
2. Any database built from backups of the live db consistently report errors now despite the fact that the backups were made after the problem was resolved and when dbcc checkdb reported NO errors (I maintain a number of test and olap databases in this way). What's happening here? (My guess is that the backup and restore process involves rebuilding indexes, rearranging data, etc. and this is resurrecting the problem) I couldn't help feeling that despite having apparently fixed the errors they were still lurking out there somewhere....
3. At no point did the data in the table appear to be corrupt in any way from the user perspective. This provokes two questions - is dbcc checkdb reliable at both reporting and fixing errors, and how serious are consistency errors?
After removing the suspect index everything was fine for a few weeks until this morning - when errors were again reported on the same table. After hours spent testing and playing around with this (dropping indexes, dropping or truncating the table and re-populating from ascii files, etc.) i've now hit a brick wall. I still suspect the problem is related to the data itself or the structure of the table but can't get any further.....so..
Has anyone come up against a similar problem?
Any suggestions for the next course of action?
Can anyone point me to documentation on checkdb or consistency errors (other than what's in BOL or the MS knowledge base)?
thanks,
d.
I am getting the error: The Procedure entry point snmpsvcgetenterpriseoid could not be located in the dynamic link library snmpapi.dll at start up of my nt4 sql server box. The only thought to that is that I need to reinstall SNMP. But I cant find the SNMP Agent anyware for me to reinstall. If you have ever seen this and have a better idea of how to fix it or if you know were i can find the agent it would be gretly apreciated.
Regards
SeTi{Ni}
I have tried to make a DTS task running a batc-file on the same server as the SQL program is running using the CmdExec command.
My Command is as follows:
CmdExec serverpathatchname.bat
The problem is that everytime the step runs it report the following error:
"The system cannot find the file specified."
In the bat file I am also trying the de-map/map a network drive with another loginname/password than the one used on the SQL-server -> is this i problem?
Hope to hear from you soon, this is a bit urgent!!
Please provide tips to this adresse: qtip@bigfoot.com
I'm running SQL 7.0 with SP2 applied. I have a database that I'm trying to replicate over the Internet.
I'm having a problem getting the initial snapshot. The total amount of data in the snapshot is 3GB. One .bcp file is 2GB and another is roughly 900MB. There are also a few smaller files.
I have my publisher and distributor setup correctly as well as my subscription. I have tested with smaller datasets. Near as I can tell, there is a problem with my files being too big. I get all the .sch files. The first .bcp file is the 2GB file.
I have tried replicating to another server on my LAN (100base-T) and get the same error.
I don't have the exact error, but it's something like:
'Failed to get file sql01_data1_data120000601105138igfile.bcp'
In my FTP Log, I see that transfer was started then aborted.
Any help on how to deliver large amounts of data over FTP would be greatly appreciated.
Thank you,
Charles
Hi,
I am having trouble trying to get a "week number" from a date field to store into a numeric table.
I have inserted the following into my DTS ActiveX code;
DTSDestination(15)=DatePart( wk , DTSSource(1) )
When I run the code the following error is shown;
ErrorDescription: Invalid procedure call or argument: ''DatePart'
Q - Does DatePart work in DTS ActiveX ?
Q - Is my syntax correct ?
david
I have the following severity errors 19-25. I am a new using to SQL Server 7.0 and would like some advice in dealing with these errors. I am going to run the DBCC CHECKDB to determine what the errors are. Is this the right approach. Thanks!!!
View 1 Replies View RelatedHi,
Here is what I am trying to do:
CREATE PROCEDURE usp_deleteSomething
@theThing_i char(11)
AS
BEGIN
SET NOCOUNT ON
delete from myTable where thing=@theThing_i
return(@@ERROR)
END
I thought this SP would return 547(foreign key constraint voilation) when column 'thing' was being referenced in another table. Instead, when the front-end application code calls this SP it gets a 1 from the delete statement itself. In other words, my return statement never seems to get executed. Is there any way of achieving this? In other words, I want to trap the error 547 and return that to the front-end.
Any replies would be greatly appreciated.
Thanks in advance,
Nishi
Hi!
Has anyone run into this error?...
In SQL 7 EM, I right-click on Users under a particular database, select New Database User and get the following error:
Error 16916: A cursor with the name 'hCForEachLogin' does not exist.
The only way to add a database user is to modify the Login for access to that database. This is fine with me, but some of our clients do not have privileges to administer server logins, only the database logins.
Also get a similar message when I right-click a table and select Properties:
Error 16916: A cursor with the name 'hC' does not exist.
In this case, when I click OK, I do get the Properties dialog box.
We did not notice this error before applying SP1, so it may be related to that. I welcome any ideas or comments.
Thanks!
We have recently upsized several Access databases to SQL 7.0. I created the ODBC datasource to an Access frontend. The tables open but I get the following error when I try to update any of the tables:
ODBC update on a linked table "tablename" failed.
Followed by:
[Microsoft][ODBC SQL Server Driver][SQL Server]The text, ntext and image data types cannot be used in the WHERE, HAVING, or ON clause except with the LIKE or IS NULL predicates [#306].
I have downloaded the latest MDAC. Any ideas?