I would like to know what is the registry key where is written that SQL Server 2000 is installed and the registry key where is the path to the data folder (master database) on Windows Server 2003. thanks
Irina
Hi im trying to install Sql Server 2005 but it says i need to Increment the Counter Registry Key for Setup in SQL Server 2005 before doing so. Im following the guide at http://msdn2.microsoft.com/en-us/library/ms143215.aspx but in my registry the folder HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionPerflibdoesnt contain any keys"Last Counter"=dword:00000ed4 (5276)"LastHelp"=dword:00000ed5 (5277) or any key for that matter.How can i fix this?
View 1 Replies View RelatedGreetings,Under which Registry key can I find SQL Server Name?MTIA,Grawsha
View 1 Replies View RelatedI am installing my application thru Installshield Professional 5. Howto know whether MS SQL Server is installed or not on the machine onwhich i am installing my application. What is the registry key thruwhich we can find this.
View 1 Replies View RelatedWhere can I find a listing of all the registry entries made at install time - or, better yet - what entries I need to elminate on uninstall? I've installed and uninstalled MSDE a number of times on my development machine, and now I can't get MSDE 2000 Rel A to install at all. I think there is one or more key blocking the installer. I appreciate your input!
View 1 Replies View RelatedI am getting this error after Litespeed installed:
Error Msg: SQL Server could not read the registry value: HKLMSoftwareImcedaSQLLitespeedexepath.
Check that the value exists, and that the SQL Server service account has full access to this keyºlue.
(11200)
Anyone gotta help here, thanks a lot.
When I install SQL Express on my XP Machine, the registry keys under local machine (ie, MSSQL.1, etc) show up, but on my Vista 64bit machine, the MSSQL.1 etc keys are not there. SQL Server still works, but the reg keys are missing.
View 1 Replies View Related
I'm trying to find the SQL Server License Number used to install the software on the server. Does the installation program stores the information on the Registry or not? Looking through registry I found the ProductCode but I'm not sure if that is the valid License Number ... It does looks more like the unistall code ...
Thanks for your help
wamregua
I have my SQL Server installation on drive c: and the databases on anotherdrive. My c drive got corrupted and I am planning to restore it from an oldbackup. This means drive c will not be up to date.Is there anything that SQL Server saves in the registry or in its homefolder that changes frequently? I am hoping that nothing does which meansthe old backup will be good enough.Although I think the default databases are in the c drive, I will try toget them back from a recent backup.John Dalberg
View 1 Replies View RelatedI have tried several times to fix the Performance counter issues using :How to: Increment the Counter Registry Key for Setup in SQL Server 2005.
I have had no luck.
Please help!!
DECLARE @DBEngineLogin VARCHAR(100)
DECLARE @AgentLogin VARCHAR(100)
EXECUTE master.dbo.xp_instance_regread
@rootkey = N'HKEY_LOCAL_MACHINE',
@key = N'SYSTEMCurrentControlSetServicesMSSQLServer',
@value_name = N'ObjectName',
@value = @DBEngineLogin OUTPUT
[Code] ....
Query to get the exact servername ( do not want to use @@servername), either need to use registry to read or using DMV...
While running Sql 2014 upgrade advisor against a 2005 remote sql server. Below is the error im getting:
"Could not populate SQL Instances: System.Security.SecurityException: Requested registry access is not allowed"
Its able to connect SQL 2005 DB server and its also populating all the required Databases, but when i'm tring to click Run at the last step above error is coming. I even installed SQL 2012 upgrade advisor in my system and getting the same above error.
However if i use SQL 2008 upgrade advisor and connect to SQL 2005 server im not getting any error.The tool is generating successfully all the Pre and Post upgrade issues.
I'm running the tool with Run as administrator option. Is there any specific change i need to do in my system so that the tool runs successfully.
I am posting this to hopefully help someone else that encounters the same issue in the future...
Server: SBS 2003 Premium, with exchange and with all service packs/patches applied.
Server-name: NEWSERVER
Server migrated from: OLDSERVER
Important notes:
This server was migrated from another SBS 2003 on different HW following the instructions provided by microsoft.
The oldserver had exchange and sql 2005 installed on it.
The new server has Office Accounting 2005 installed, but I don't think that matters...
I am trying to install SQL 2005 from the SBS2003-R2 DVD onto the new server, and get the following error:
Error:
---
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
SQL Server Setup failed to modify security permissions on registry key SOFTWAREMicrosoftMicrosoft SQL ServerMSSQL.2MSSQLServerSuperSocketNetLib for user Administrator. To proceed, verify that the account and domain running SQL Server Setup exist, that the account running SQL Server Setup has administrator privileges, and that the registry key exists on the destination drive.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=setup.rll&EvtID=29508&EvtType=sqlca%5csqlsddlca.cpp%40Do_sqlRegSDDL%40ExceptionInSDDL%40x7344
------------------------------
BUTTONS:
&Abort
&Retry
&Ignore
------------------------------
---
I looked in the registry, and the administrators group has full control over this key.
Digging into the SQLSETUP log file, at the end I see:
---
Configuring ACL:
Object: HKLMSOFTWAREMicrosoftMicrosoft SQL ServerMSSQL.2MSSQLServerSuperSocketNetLib
ACL: (A;CI;KR;;;[SQLServer2005SQLBrowserUser$NEWSERVER])(A;CI;KR;;;NS)
Action: 0x100
Failed ACL:
ReplaceSDDLSid is failed at the error code 1332; Converted SDDL: '(A;CI;KR;;;[SQLServer2005SQLBrowserUser$NEWSERVER])(A;CI;KR;;;NS)'
Error Code: 0x80077344 (29508)
Windows Error Text: Source File Name: sqlcasqlsddlca.cpp
Compiler Timestamp: Tue Sep 13 01:08:29 2005
Function Name: ExceptionInSDDL
Source Line Number: 65
---
Looking into AD Users+Computers, there is not a group present for SQLServer2005SQLBrowserUser$NEWSERVER but there is one for SQLServer2005SQLBrowserUser$OLDSERVER.
It appears that the install did not create the new group that was necessary..
Once I duplicated the OLDSERVER group, renaming it to have NEWSERVER, the installation completed without error.
I hope this saves someone else a few hours of pain.
-Jason
www.protected-pc.com
I've been trying to re-install VS2005 & MS SQL Server express, and I've hit a snag trying to install SQL Server express.
I started by trying to use the automatic uninstaller for VS and had problems so I tried manually uninstalling it (bad idea), which didn't work either, so I re-installed VS completely, then uninstalled it using the automatic uninstaller. I then tried installing, which worked for VS2005, but it didn't work for SQL Server. I've tried 3 times now, and each time it says SQL Server 2005 failed to install.
I checked the summary.txt log found in C:Program FilesMicrosoft SQL Server90Setup BootstrapLOG and from what I understand, it seems that I don't have priveledges to change some registry keys. This has me really lost because I'm installing as Administrator, as you can see from the log below, so I should have access to the registry. Administrator is the only account on the computer so I know I haven't messed up priveledges from another account.
I've included the contents of the summary log below if anyone can make any sense of it and has any ideas I can try.
Code Block
Microsoft SQL Server 2005 9.00.3042.00
==============================
OS Version : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Time : Sun Oct 07 10:12:41 2007
MRAWESOME : To change an existing instance of Microsoft SQL Server 2005 to a different edition of SQL Server 2005, you must run SQL Server 2005 Setup from the command prompt and include the SKUUPGRADE=1 parameter.
Machine : MRAWESOME
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.3042.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_MRAWESOME_SQLSupport_1.log
--------------------------------------------------------------------------------
Machine : MRAWESOME
Product : Microsoft SQL Server Native Client
Product Version : 9.00.3042.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_MRAWESOME_SQLNCLI_1.log
--------------------------------------------------------------------------------
Machine : MRAWESOME
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.3042.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_MRAWESOME_SqlWriter_1.log
--------------------------------------------------------------------------------
Machine : MRAWESOME
Product : MSXML 6.0 Parser (KB933579)
Product Version : 6.10.1200.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_MRAWESOME_MSXML6_1.log
--------------------------------------------------------------------------------
Machine : MRAWESOME
Product : SQL Server Database Services
Error : SQL Server Setup failed to modify security permissions on registry key SOFTWAREMicrosoftMicrosoft SQL Server90Replication for user Administrator. To proceed, verify that the account and domain running SQL Server Setup exist, that the account running SQL Server Setup has administrator privileges, and that the registry key exists on the destination drive.
--------------------------------------------------------------------------------
Machine : MRAWESOME
Product : SQL Server Database Services
Error : SQL Server Setup failed to modify security permissions on registry key SOFTWAREMicrosoftMicrosoft SQL Server90Replication for user Administrator. To proceed, verify that the account and domain running SQL Server Setup exist, that the account running SQL Server Setup has administrator privileges, and that the registry key exists on the destination drive.
--------------------------------------------------------------------------------
Machine : MRAWESOME
Product : Microsoft SQL Server 2005 Express Edition
Product Version : 9.00.1399.06
Install : Failed
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_MRAWESOME_SQL.log
Last Action : InstallFinalize
Error String : SQL Server Setup failed to modify security permissions on registry key SOFTWAREMicrosoftMicrosoft SQL Server90Replication for user Administrator. To proceed, verify that the account and domain running SQL Server Setup exist, that the account running SQL Server Setup has administrator privileges, and that the registry key exists on the destination drive.
Error Number : 29508
--------------------------------------------------------------------------------
SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%Microsoft SQL Server90Setup BootstrapLOGSummary.txt.
Time : Sun Oct 07 10:18:00 2007
List of log files:
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_MRAWESOME_Core(Patched).log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_MRAWESOME_SQLSupport_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_MRAWESOME_SQLNCLI_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_MRAWESOME_SqlWriter_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_MRAWESOME_MSXML6_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_MRAWESOME_SQL.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_MRAWESOME_Datastore.xml
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_MRAWESOME_.NET Framework 2.0.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_MRAWESOME_Support.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_MRAWESOME_Core.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSummary.txt
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_MRAWESOME_SCC.log
I got this system error log in the event viewer every time I start the SQL Server cluster resource:
The Microsoft Clustering Service failed restore a registry key for resource SQL Server when it was brought online. This error code was 2. Some changes may be lost.
Even though the SQL seems to be working fine now, I won't know if something drastic will happen later. :confused:
Searching the Internet for resolution, I saw this article. The Microsoft Knowledge Base Article - 307469 (http://support.microsoft.com/default.aspx?kbid=307469) requires using the Windows Server 2003 ClusterRecover utility to reset the server cluster check points.
I've not tried it because I don't know if this is the correct solution or if it will work or not.
Can I even solve the error without using the above utility? I also cannot afford to reinstall the clustering or SQL server. :mad:
Thanks in advance. :)
In the registry in Windows 10, I looked inside HKEY_LOCAL_MACHINESOFTWAREMicrosoftMicrosoft SQL Server. Is LoginMode still in some subfolder of that, or has it been moved to another place? Perhaps a differently named key is now used. Or perhaps it's configured in a config file for SQL Sever 2012 express.
View 3 Replies View RelatedI'm trying to do an unattended upgrade of 2014 RTM to 2014 SP1.
It's my first attempt at an upgrade configuration file, and its failing with missing registry entry for database engine service and replication service.
Error in summary.txt is:
The registry key SOFTWAREMicrosoftMicrosoft SQL ServerMSSQL12.MSSQLSERVER2495Setup is missing
That's a valid error, as the registry only has an entry for:
HKEY_LOCAL_MACHINESOFTWAREMicrosoftMicrosoft SQL ServerMSSQL12.MSSQLSERVERSetup
Am I missing something obvious here, or how can this be resolved?
When you get a message from Windows NT say that you may
have "low registry quota", what does that mean and what
corrective action needs to be taken?
Thanks!!
How to restore registry for sql server.
I read once in discussion board when the sql agent not starting he said that after restoring registry its fine.
So how to restore and how to backup?
Thanks
Jackson
Below are the registry entries I want to update but "Trusted_Connection" = "Yes" does not seem to have any effect when it is run. Any ideas??
REGEDIT4
[HKEY_CURRENT_USERSoftwareODBCODBC.INIAAED]
"Driver"="C:WINNTSystem32sqlsrv32.dll"
"Description"="AAED"
"Server"="SIM0108"
"Trusted_Connection"="Yes"
[HKEY_CURRENT_USERSoftwareODBCODBC.INIODBC Data Sources]
"AAED"="SQL Server"
can anyone give the registry key for sqldmo.dll?
View 1 Replies View RelatedI need to make a system dsn connection on 50 pc.It's a system dsn connection with sql usersI have though about to make a registry key, but I don't know where user andpassword are in the registry.My question is where in the registry can I find these keys?CD
View 2 Replies View Relatedwhat would be the best way to push a registry setting to about 3000 PC's. A Batch file is my thought. Any ideas?
Thanks.
I thought so but I'm looking for a couple of packages and I am not be able to find any there at all.
Hi,
I have an SSIS Package which reads the properties values from Registry. As per the constraint of SSIS I have created the keys under HKCU in the registry and things work fine from the designer.
But, when I schedule the SSIS Package to run under SQL Agent (which is running under Local System) the values of configuration do not seem to be picked up from Registry.
How I tested was:
I am picking up the server name for the Connection Manager from Registry and I set that value to an invalid servername. But, the job seems to be executing fine.
Using DTEXEC it fails as expected since, this is running under my credentials.
Also, SYSTEM has full control on the new regsitry keys.
Any information on this?
Thanks,
Gaurav
Hi,
I have the following problem... In my table I store calling registries...and when a call is transfered to another branch the last brach have to receive all the time...
Só I have the following table
Code Snippet
CREATE TABLE [BILHETES_PROCESSAR] (
[COD_CLIENT] [varchar] (50) COLLATE Latin1_General_CI_AS NOT NULL ,
[DATE_TIME] [datetime] NOT NULL ,
[NRTELEFONE] [varchar] (255) COLLATE Latin1_General_CI_AS NOT NULL ,
[BRANCH] [varchar] (255) COLLATE Latin1_General_CI_AS NULL ,
[TIPO] [varchar] (255) COLLATE Latin1_General_CI_AS NULL ,
[TIPO_ORIGINAL] [varchar] (255) COLLATE Latin1_General_CI_AS NULL ,-- Tells if is a originate call "2" or received a tranfer "6"
[TRONCO] [varchar] (255) COLLATE Latin1_General_CI_AS NULL , -- The port of the router through the call have been made
[TRANSF] [varchar] (50) COLLATE Latin1_General_CI_AS NULL ,--The branch that is going to receive this call
[ORIGEM_TRANSF] [varchar] (50) COLLATE Latin1_General_CI_AS NULL ,--The branch that sent the call
[VALOR_TEMPO] [money] NULL ,
[ID_TRANSF] [uniqueidentifier] NULL ,--ID for the branch that originated the call
[ID_REGISTRO] [uniqueidentifier] NOT NULL --ID of the registry
) ON [PRIMARY]
GO
For this table I can have the following data
Code Snippet1002 2007-07-30 17:52:34.000 01191084426 236 2 2 9 210 NULL 15.0 C1AF0190-B1EB-4DEB-993A-D64D6C9F7CD4 C1AF0190-B1EB-4DEB-993A-D64D6C9F7CD4
1002 2007-07-30 17:53:17.000 01191084426 210 2 6 9 214 236 63.0 C1AF0190-B1EB-4DEB-993A-D64D6C9F7CD4 D680C38D-C217-461A-8207-9FC367FBB51C
1002 2007-07-30 17:54:30.000 01191084426 214 2 6 9 NULL 210 50.0 C1AF0190-B1EB-4DEB-993A-D64D6C9F7CD4 24B3073B-F45F-4E87-9796-55F37847473D
So I got this results running this query..
Code Snippet
UPDATE P SET P.TRANSF=P2.BRANCH,
P.ID_TRANSF=
CASE
WHEN P.TIPO_ORIGINAL = '2' THEN P.ID_REGISTRO
WHEN P2.ID_TRANSF IS NOT NULL THEN P2.ID_TRANSF
ELSE '1C4CCB4E-9229-4A6C-A6A4-B881A01EEACF'
END
FROM BILHETES_PROCESSAR P INNER JOIN BILHETES_PROCESSAR P2
ON
P.COD_CLIENTE=P2.COD_CLIENTE AND
P.NRTELEFONE=P2.NRTELEFONE AND
P.TRONCO=P2.TRONCO
WHERE
P2.DATE_TIME >= P.DATE_TIME
AND (
(P.TIPO_ORIGINAL IN (1, 5, 7) AND P2.TIPO_ORIGINAL IN (5, 7)) OR
(P.TIPO_ORIGINAL IN (2, 4, 6, 8) AND P2.TIPO_ORIGINAL IN (4, 6, 8))
)
AND P2.BRANCH <> P.BRANCH
AND P.TRANSF IS NULL
UPDATE P2 SET P2.ORIGEM_TRANSF=P.BRANCH, P2.ID_TRANSF=
CASE
WHEN P.ID_TRANSF IS NOT NULL THEN P.ID_TRANSF
ELSE P.ID_REGISTRO
END
FROM BILHETES_PROCESSAR P INNER JOIN BILHETES_PROCESSAR P2
ON
P.COD_CLIENTE=P2.COD_CLIENTE AND
P.NRTELEFONE=P2.NRTELEFONE AND
P.TRONCO=P2.TRONCO
WHERE
P2.DATE_TIME >= P.DATE_TIME
AND (
(P.TIPO_ORIGINAL IN (1, 5, 7) AND P2.TIPO_ORIGINAL IN (5, 7)) OR
(P.TIPO_ORIGINAL IN (2, 4, 6, 8) AND P2.TIPO_ORIGINAL IN (4, 6, 8))
)
AND P2.BRANCH <> P.BRANCH
AND P2.ORIGEM_TRANSF IS NULL
UPDATE P2 SET P2.ID_TRANSF=P.ID_TRANSF
FROM BILHETES_PROCESSAR P INNER JOIN BILHETES_PROCESSAR P2
ON
P.COD_CLIENTE=P2.COD_CLIENTE AND
P.NRTELEFONE=P2.NRTELEFONE AND
P.TRONCO=P2.TRONCO
WHERE
P2.DATE_TIME >= P.DATE_TIME
AND (
(P.TIPO_ORIGINAL IN (5, 7) AND P2.TIPO_ORIGINAL IN (5, 7)) OR
(P.TIPO_ORIGINAL IN (4, 6, 8) AND P2.TIPO_ORIGINAL IN (4, 6, 8))
)
AND P2.BRANCH <> P.BRANCH
AND P2.ID_TRANSF='1C4CCB4E-9229-4A6C-A6A4-B881A01EEACF'
This query has only one problem if the user has made a 4º transfer th2 two last registry will have wrong "transf" and "origem_transf" values... but this is not my big problem...
The big problem is that I need to sum all it "valor_tempo" put it on the last registry... that is the one with the code "24B3073B-F45F-4E87-9796-55F37847473D" and then set the "valor_tempo" to 0 to the other registry...
Did you get the ideia ??
Thanks
Hi,
Quite new to SSIS am currently trying to set up a registry configuration which will hold a connection string which will enable the main SQL configurations for a package to load. I wish to put the registry entry under the HKEY_LOCAL_MACHINE directory or more precisely in a key such as below:
HKEY_LOCAL_MACHINESOFTWAREMy CompanyMy ProjectETLConfigDbString
Have set this key up with a default value of the connection string and an associated registry configuration with the above as the value in the regsitry entry box. This configuration is listed as the first configurartion for the package to ensure it gets applied before the SQL configuration loads.
However on load or execute I get a warning of the type
A configuration entry specifies a registry key that is not available. Check the registry to ensure that the key is there.
Are there any known problems with regsitry configurations or am I just missing something obvious here ?
Thanks
I was looking at the registry key value "ConcurrentLimit" in
"HKEY_LOCAL_MACHINE'SOFTWAREMicrosoftMicrosoft SQL Server80MSSQLLicenseInfoMSSQL8.00"
and wondering if this the concurrency control of SQL Server. Can someone please verify??
One of our SQL Production Server I inherited was installed with this version by mistake. The value for this key was set to 2. Does this mean it only allows 2 concurrent access to the SQL Server??
Thanks...byyu :)
I support many uncontrolled MSDE installs on Win98 machines who are moving to XP. Unfortunately, many of the machine owners are choosing to upgrade their machines to XP, rather than choosing to re-roll.
The problem with this is that the edition of MSDE 2 (SP2) that I'm supporting not only gets it's registry items for the services ripped out, but the perflib registry itself becomes truncated by the MS Windows upgrade. So, no services and the thing can't be uninstalled due to performance monitor rollback issues...
Refer you all to MS KB Article 300956 and the fix for the broken registry which includes expanding system files that contain the default perflib entries referenced by registry. I ran through this process and found that it worked. I was then able to install a named instance of MSDE and remove the broken copy, followed by the instance. From here an install of MSDE went on fine. So what am I posting for?
Adding performance counters into the perflib/009 registry key during the install (which is a condition of my MSDE install and can't be changed) is all well and good, but what about other applications requiring performance counters? Since they have been replaced by the system default performance monitors what kinds of other services, apps or anything may be adversly affected? Not really a db question but directly linked to being able to support MSDE...
Is there anyone out there who's had to utilise this fix before and are there any repercussions that are considered unnaceptable in terms of losing machine functionality???
Basically I need to know if taking performance counters back to the stock system settings is not all that horrible a thing to do to XP client machines, especially as the perflib keys are so corrupted anyway.
ANY THOUGHTS???
(other than formatting and starting again of course!)
We developed a sql server compact edition application, and deployed to client machines. Installation is working for all machines, however, when running the application, some machine had the error message "Mobile encountered problems when creating the database", (first run of this application will replicate the database from sql server 2005 to local sql server compact edition file .dsf), some machine did not have this issue. I found the machine experiencing the problem does not have the HKey_local_machinesoftwaremicrosoftwindows CE services folder in the machine. Anyone here know which component is missing from windows XP with services pack 2? Thanks.
Hello,
I am trying to sync (using SQL Server 2005) and have set the Interactive Conflict Resolver to be used, however when I sync it fails with this error:
The merge process failed to get correct information about the Interactive Resolver component from the registry. Verify that the registry exists and that the path is correct
Anyone ever see this before and know how to resolve it? I've looked all over.Thanks guys,Chris
The RC1 installer (and the previous beta too) doesn't write in the following registry key:
[HKEY_CLASSES_ROOTCLSID{32CE2952-2585-49a6-AEFF-1732076C2945}OLE DB Provider]
@="Microsoft SQL Server CE 3.0 OLE DB Provider for Windows"
so this provider doesn't appear on the oledb "Data Link Properties" panels. Manually entering the above key solves the problem. The last summer CTP version has been done this trick.
I try to store a SSIS-configuration value in the registry.
But it's failed. I get a warning, that the registry-key is not found.
What is the syntax ? I have searched in BO,MSDN and Google/Internet ==> nothing.
There is no example.