MS SQL Server :: Remote Connection

An Error Occurred While Receiving Data: '10054(An Existing Connection Was Forcibly Closed By The Remote Host.)'.

Jan 3, 2006

What does this error mean? I get this in the transmission_status column of sys.transmission_queue

An error occurred while receiving data: '10053(An established connection was aborted by the software in your host machine.)'.

Also, does the number in this message correspond to error 10053 in sys.messages?

Thanks

View 3 Replies View Related

MSSQL SERVER ERROR 10053

Dec 12, 2007

My application currently use an ODBC connectivity to MSSQL 2005 DBs and after rebooting the application was no longer able to connect to the database and I was not able to connect to the database via Management Studios. When trying to connect via Mngmt Studio get msg: TCP Provider error 0 - An established connection was aborted by software in your host machine (Microsoft SQL Server, ERROR 10053).

When trying to connect via the DSN connnection test get msg: SQL State 01000 - SQL Server 10053 SQL Server State 08501 - SQL Server 11

Can you please help me out in getting this back - thanks a lot

View 1 Replies View Related

Error: 10054

May 17, 2007

In the past week, 3 times I have had our webserver get this error virtually non-stop for several hours at a time.

I think it's due to what it says here http://msdn2.microsoft.com/en-us/library/ms189083.aspx

Connections May Be Forcibly Closed When Running on Windows Server 2003 SP1

When testing scalability with a large number of client connection attempts to an instance of the SQL Server Database Engine running on Windows Server 2003 Service Pack 1, Windows may drop connections if the requests arrive faster than SQL Server can service them. This is a security feature of Windows Server 2003 Service Pack 1, which implements a finite queue for incoming TCP connection requests. It results in the following error:

ProviderNum: 7, Error: 10054, ErrorMessage: "TCP Provider: An existing connection was forcibly closed by the remote host ...

To resolve this issue, use the regedit.exe utility to add the following registry key:

Key Type Name Value
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParameters DWORD
SynAttackProtect
00000000

Security Note:
Setting this registry key may expose the server to a SYN flood, denial-of-service attack. Add this registry value only if necessary and with an understanding of the security risks. Remove this registry value when testing is complete.

Twice I had this problem after restarting the database server. Could it be that the requests are somehow getting queued and then when the database server comes back up, it gets hit too hard? So then it goes into "protect my ass" mode?
How do you test where these connection requests are coming from?
I don't really want to disable this security setting...

View 1 Replies View Related

An Error Occurred While Receiving Data: '10054(error Not Found)'.???

Oct 31, 2007

Hi,

I have set up SB between 2 databases, and I keep geting a variety of error messages in the queue on both sides. The first is:
An error occurred while receiving data: '10054(error not found)'.

And on the other side its
Service Broker received an error message on this conversation. Service Broker will not transmit the message; it will be held until the application ends the conversation.

The only difference between this and the tutorials is that the TCP port have been moved to 4321 instead of 4022, and this has been done both sides, because something else was blocking the 4022 port. This one is definately free on both sides. I have recreated the certificates, the users, the end points, the queues and the services multiple times, and checked them all in the sys.routes etc and they all seem fine.

I do also get a message in the queue that I can receive sometimes that tells me I don't have rights to the service on the other machine. I can send a message to itself and it doesn't complain.

Both machines are on the same domain, and I have also tried to grant rights to public to no avail.

Help!

TIA

Ian.

View 2 Replies View Related

Mirroring Gives Me The Error 1418 And In The Server Log Gives The Error 10054

Aug 16, 2006

Hi,

I am trying to mirror the databse with a witness server.

I have sql server 2005 with SP1 or both my mirror and principle and sql express on my witness.

The problem is when I click start mirroring, I get the following error

The server network address"TCP://serveraddress:7026" can not be reached or does not exist. Check the network address name and that the ports for the local and remote epoints are operational.

(Microsoft SQL server, error:1418)

I have pinged the address it works fine . The telnet comes up with a blank screen.

When I look at the the server log file viewer, I get the following message

An error occured while receiving data: 10054 (An existing connection was forcibly closed by the remote host)

for 'TCP://serveraddress:7026'.

Please help me soon

View 6 Replies View Related

Remote Connection Error

Jun 24, 2006

System.Data.SqlClient.SqlException: An error
has occurred while establishing a connection to the server. When
connecting to SQL Server 2005, this failure may be caused by the fact
that under the default settings SQL Server does not allow remote
connections. (provider: SQL Network Interfaces, error: 26 - Error
Locating Server/Instance Specified)

I have enabled the remote connection in the surface area configuration, and i've also enabled my sql browser.
This error raised when i'm testing my just installed WSRFdotnet using
NUnit testing, however, when I tested my remote connection using SQL
Server Management Studio Express CTP, it worked. btw, I'm using SQL
Express

any solutions?
thx

View 3 Replies View Related

Remote Connection Error

Sep 18, 2006

hi communitythe error something like this " error 40, could not open connection to sql server" . For community information i try to transfer my membership table from sql express 2005 to sql server 2000. my application something like email where user need to create their account first before they can log in. I use membership default in mssql express . and my datacenter do not support sql express ( like all we know most of them). I already surf some tips from the internet how we can transfer our membership from sql exppress to sql server but i get this error . i already try to change the setting from sql server surface area configuration but it still not working.. i hope someone ( the jedi ) can help me .. ThankMay The Force Be With U

View 1 Replies View Related

Remote Connection Error

Oct 6, 2007

hello allmy web page occur this errorAn error has
occurred while establishing a connection to the server. When
connecting to SQL Server 2005, this failure may be caused by the fact
that under the default settings SQL Server does not allow remote
connections. (provider: Named Pipes Provider, error: 40 - Could not
open a connection to SQL Server) what is this, my site does not contain the remote connection i m using sql server 7.0so please help me Ashwani Kumar

View 1 Replies View Related

SQL REMOTE CONNECTION ERROR

Dec 3, 2007

when connecting to database it give me the error like this

Message "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)" string

can you have any idea to solve it..

View 2 Replies View Related

Remote Connection Error

Jun 2, 2007

Hi.Its really become a nightmare solving remote SQL Server connection. I thought it was going to be easy. Anyway im using win xp sp2 and sql 2k5 express as testing environment. I followed trouble shooting

tips:

http://blogs.msdn.com/sql_protocols/archive/2006/09/30/SQL-Server-2005-Remote-Connectivity-Issue-TroubleShooting.aspx

and secured all requirements to met one by one.
I created a test script (ASP) running on the same box where the SQL Server was installed and its running perfectly (eg http://127.0.0.1/sql.asp OR http://localip/sql.asp) either using one of the following connection string

cn.Open "Driver={SQL Server};" & _
"Server=live-static -ip;" & _
"Address=local-ip,1433;" & _
"Network=DBMSSOCN;" & _
"Database=xxx;" & _
"Uid=xx;" & _
"Pwd=xxx;"

OR

cn.Open "Provider=sqloledb;Network Library=DBMSSOCN;" & _
"Data Source=local-ip,1433;" & _
"Initial Catalog=testdb;" & _
"User ID=xx;Password=xx;"

now i upload the page to our domain host and try to access but its sending an error:

################ ERROR MESSAGE

Microsoft OLE DB Provider for ODBC Drivers error '80004005'

[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]SQL Server does not exist or access denied.

/sql.asp, line 6

########################################

sql browser is also running, and remote connections allowed, port exemption and firewall is turn off but im receiving the same error.

where im getting wrong.

View 5 Replies View Related

Question On A Remote Connection Error

Dec 4, 2007

Through the SMS tool, the following error is being received:

===================================
Cannot connect to MyServerMyInstance.
===================================
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (.Net SqlClient Data Provider)

Note: obviously the server/instance of MyServerMyInstance is fake :).

The setup is the developers receiving this error are connecting to the domain remotely through a VPN connection (so they are on a different, non trusted domain). Also, the IP address our server is on uses an internal range that the remote developers already have in use for something else on their network. So we gave them a bogus IP to use where we then perform a 1-to-1 NAT translation on our end to the correct IP. This all appears to work but the developers still receive this error.

We do have remote connections enabled for both TCP/IP and NetBIOS and everyone at our office can connect just fine. With this in mind, what could be some other issues that can cause this? The only other thing I can think of is somewhere (there are 2 firewalls involved - ours and theirs) is that the UDP packets are not being received by the client.

View 12 Replies View Related

Remote Connection Error While Running A EXE

Mar 30, 2008

I am getting this error
"An error has occurred while establishing a connection to the server.when connecting to SQL Server 2005,this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.(provider:Named Pipes Provider,error:40-Could not open a connection to SQL Server)(Microsoft SQL Server,Error:2)"

in SQL EXPRESS 2005"

1.Just changing the service config settings that is TCP/IP to enable will it work?i changed i run my application but it didn't work they have written the code to the server(connection string to their server- if it was to common how to write the code ?) & is there any other changes ?

2.I have developed a VB.NET EXE file -In that application(inside the code) i am using run time connection string queries to connect to the database & created run time tables.?
Suppose if i want to install the application to all clients/users how to Configure that application - self configuration/self installer to the installing machine SQL SERVER.
How can i do this ?

3.Is there any way i can write config file for sql server along with exe application code ? How can i do this ?

Pls answer with details/screenshots or diagramatical (if possible)
pls reply asap

Dotnetnewbiw

View 1 Replies View Related

Remote Network Connection - Error 26

Nov 19, 2007

I am converting over from MSDE to SQL Express. My front end program is unable to connect to the database. To troubleshoot, from the remote computer I tried connecting with the management program and I get the Error 26 unable to connect.

Here is what I have done: I made sure that the SQL Server configuration has been changed to allow network connections (both TCP and named pipes). I have disable windows firewall on both machines. I confirmed that I can connect from the remote machined to the server by network browsing. Both machines are running XP Proff. There is no other security software running on either machine.

More Info. when attempting to log on I am using the server authntication, I use "sa" as the user id plus my password.

Goal. The front end of database program connects to the server remotely using a program called Hamachi over the internet. This works without a problem on MSDE. But for now I am simply try to connect using the managment program which lets you browse for other serves. When I do this it shows the remote computer, but not the name of the computer but not the SQL server which I type in like the following: "INTELsql1"

What I have not Done: I have not changed any permissions or added any users to the server, since this does not seem necessary. As stated the user of remote machine can connect to the server and change files.

Would appreciate any suggestions or tips. Thanks.

View 1 Replies View Related

ASP-SQL Server Remote Connection Error

Jun 2, 2007

Its been almost 2 months i start running a test script page to check if i made the remote connection until now its getting worst.

I did follow every bit of the instruction and pre-evaluation in fact the script is working locally with this string:

cn.Open "Driver={SQL Server};" & _
"Server=global-static-ip;" & _
"Address=local ip,1433;" & _
"Network=DBMSSOCN;" & _
"Database=testdb;" & _
"Uid=xx;" & _
"Pwd=xx;"

i also review the ff post for client and server trouble shooting tips:
http://blogs.msdn.com/sql_protocols/archive/2006/09/30/SQL-Server-2005-Remote-Connectivity-Issue-TroubleShooting.aspx

surface configuration, sql browser, firewall exemption...

and nothing seems change when i access the uploaded script.

is there anything i am missing?

by the way the script is uploaded by company.

View 3 Replies View Related

Connection Error To Remote SQL Instance, Over VPN

Aug 21, 2006

I am trying to connect to an instance of SQL Express through a vpn, simply using the SQL Management Studio, providing the server ip address x.x.x.xMSSQLSERVER, and using SQL authentication login. I receive the following message:

Cannot connect to <server>, etc., etc.

error 25: - Connection string is not valid

Does anyone understand this? I am trying to connect through the SQL Server Management interface, not with a client program that would utilize a connection string. Is there something which prevents Management Studio from working over a vpn?

To connect, I am using SQL authentication, and have verified the login and password locally on the target pc. The SQL browser service is running on the target pc, and I can telnet to the port which it is monitoring, through the same vpn connection. Remote connections are enabled for TCP/IP in the Surface Area configuration on the target pc.

Any help appreciated.

View 6 Replies View Related

Remote Connection Failure -- Error 26

Nov 19, 2007

Overview. I am converting over from MSDE to SQL Express. My front end program is unable to connect to the database. To troubleshoot, from the remote computer I tried connecting with the management program and I get the Error 26 unable to connect.

(The connection string worked previously (yesterday) when using MSDE as the server. When I installed SQL Express I named it the same instance as the server name under MSDE. I also use server authtication on both with same user name and password. As stated below I cannot connect using the managment console.)

Here is what I have done: I made sure that the SQL Server configuration has been changed to allow network connections (both TCP and named pipes). I have disable windows firewall on both machines. I confirmed that I can connect from the remote machined to the server by network browsing. Both machines are running XP Proff. There is no other security software running on either machine.

More Info. when attempting to log on I am using the server authntication, I use "sa" as the user id plus my password.

Goal. The front end of database program connects to the server remotely using a program called Hamachi over the internet. This works without a problem on MSDE. But for now I am simply try to connect using the managment program which lets you browse for other serves. When I do this it shows the remote computer, but not the name of the computer but not the SQL server which I type in like the following: "INTELsql1"

What I have not Done: I have not changed any permissions or added any users to the server, since this does not seem necessary. As stated the user of remote machine can connect to the server and change files.

Would appreciate any suggestions or tips. Thanks.
I HAVE READ THE POST FROM MAY 13, 2007 AND TAKEN ALL STEPS SUGGESTED EXCEPT MAKING SURE THE BROWSERS SERVICE IS RUNNING ON SERVER WHICH I WILL DO NOW.

View 2 Replies View Related

SQL Server 2005: Remote Connection Error

Sep 13, 2007

Hey all.

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)

View 2 Replies View Related

Remote Connection Error - But Everything Installed Locally?

Mar 12, 2007

I have a visual basic 2005 application where I am storing some data in a Sequel Server Database. It's my first attempt using SQL Server. It was developed on my machine and the database is on my local hard drive.

It was put onto an industrial PC and shipped last December (the vb app is an HMI).

Our service guy is installing the machine and asked for some changes to the VB screens. I ran my app (on my computer) and it crashed when I selected the screen where I use the db.

So I decided to look at the database using Visual Basic and I get the following error:

Microsoft Visual Basic 2005 Express Edition

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)

I then tried to create a new database via Visual Basic and get the same error. My boss has it installed on his machine. Same error there. These are both machines that had no problem back in December!

I also have a industrial PC on my desk to test my app and it STILL WORKS there. That one though is not connected to the internet and hasn't gotten any updates or changes or whatever since I last had it on in December. I don't know if it was a windows update or a network change? But as I said, I'm not connecting remotely - SQL Server and the db are on our local machines.

Interesting enough, if I go to the control panel | Administrative Tools | Services, SQL Server (SQLEXPRESS) is set to automatic and is NOT started. I attempt to start it and get an error

Services

Windows could not start the SQL Server (SQLEXPRESS) on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 3417.

I am lost.

Thanks in advance for any help!

View 10 Replies View Related

SQL Server 2005 Remote Connection Not Allowed Error 26

Jan 11, 2008

Help! My web-application worked fine last week. I have made some enhancements and it still works fine when I test in locally in VS 2005 and from IIS when I allow unauthenticated users (by commenting out "<deny users="?"/>" in my web.config. However, with not allowing unauthenticated users, I get redirected to a login application (which also worked last week), where I supply one of several user names and passwords and it is supposed to redirect me back to my default.aspx page. Only, now it is taking the authentication parameters from the login screen but is not redirecting me back to my app's page and instead is putting up this Error 26 that states SQL Server 2005 does not allow remote connections.
The included stack trace has no information about what server it seems to be trying to connect with, but the strangest thing about it is I/we are not using SQL Server 2005 yet (still a future upgrade not too far off). The application database, the authentication aspnetdb database, and the Session aspstate database are all on the same SQL Server 2000 managed server. And, these were all working last week (and are all accessible). I have not changed any connection strings and as I said, it works fine without the loging in part both locally and from IIS. It is only when using the Login in application, which is working with other apps and the developer insists the problem has to in my application (after all the first line of the error message states: Server Error in '/deployment1' Application, which is my app!)
I am lost in finding the culprit, can someone please give me some ideas?

View 2 Replies View Related

Remote Connection Error : Problem In Writing In A Table

Feb 15, 2008

Hi,
I have a problem when updating tables in a SQL Server 2000. I am able to make a select form tables but I can't insert data. I got this error :
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
SQLExpress database file auto-creation error:

View 3 Replies View Related

When I'm Connection My Asp.net Application From Remote Computer Following Error Is Occured?

Jun 3, 2008

plz help me...
when establishing a connection to the server. when connecting to server 2005, this failure may be caused by the fact that under the default setting SQL Server does not allow remote connections.(provider: Named pipes provider, error:40 - could not open a connection to sqlserver)

View 2 Replies View Related

EM Error 'connection Forcibly Closed By The Remote Host' (ouch)

Jul 22, 2005

I am getting this error in Enterprise Manager:
TCP Provider: An existing connection was forcibly closed by the remote host.

But, my web app can still connect just fine to the db, so it's still in
the same place with the same login/password. And my registration
in EM was working just fine (for years) until yesterday I got this
error. I've tried deleting the registration and re-creating it
but the same thing. What could have gone wrong to cause this to
happen?

Thanks for any pointers, I have no idea where to start looking on this one, the host says they haven't changed anything...

View 1 Replies View Related

Named Pipes Error With Remote Connection Problem For Maintenance Plan

Jan 2, 2007

OS: Win 2003 Service Pack I on 2 boxes
SQL: SQL Server 2005 Clustered System

Situation: I have created a maintenance plan to backup my transaction log every hour. This runs fine for some time and then later that day it stops working. This could happen at any anytime, and I end up having to manually kick it off again. I read the SQL error logs and this is what it points to:

[298] SQLServer Error: 2, Named Pipes Provider: Could not open a connection to SQL Server [2]. [SQLSTATE 08001]
[165] ODBC Error: 0, Login timeout expired [SQLSTATE HYT00]
[298] SQLServer Error: 2, An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. [SQLSTATE 08001]
[382] Logon to server 'JAXNVSQL1CLS' failed (ConnAttemptCachableOp)
[177] Job MaintenancePlan Insight Transaction Logs has been requested to run by Schedule 10 (Insight Transaction Log Backup)
[165] ODBC Error: 0, Login timeout expired [SQLSTATE HYT00]

I have already used SAC to confirm that remote connections is enabled using TCP/IP and Named Pipes. I have used the server configuration tool as well to check this. I have used the Studio Management and checked on the remote connections as well.
I know these protocols are enabled and working because I have used the Studio Management to check on the activity connections type and seen both are working. Plus the fact this maintenance plan does work, it just so happens something causes it later to fail. When this does fail, I log onto the server but can not login using the Studio Management , I get [298] errors. I can login using the Studio Management on my laptop remotely but can not manually kick off the maintenance plan. I end up having to log on to the server and restart the MSSQL Server service and manually kick off my plans. (By the way these services do not show shutting down in the Windows event viewer). After restarting the MSSQL Server service and manually executing the maintenance plan everything is fine until the next time it hits a glitch.
I do have SQL Browser up and running, all of the MSSQL services running, I need some help as to what may be causing this problem!!!!!!!!! HELP!!!!! I am losing my mind!!!!

View 5 Replies View Related

TCP Provider, Error: 0 - An Existing Connection Was Forcibly Closed By The Remote Host

Apr 29, 2006

We are getting a problem when the below error Log

Server: SQL Server 2005 and SP1.

Then, All the Web Servers will drop all connections and stop the network service. Later, the network service will start up automatically but all the before service is dropped.

We would like to know the error coming from?

Error Log

================

TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host

Event Type: Warning
Event Source: ASP.NET 2.0.50727.0
Event Category: Web Event
Event ID: 1309
Date: 4/29/2006
Time: 10:48:47 AM
User: N/A
Computer: 88DBWEB0
Description:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 4/29/2006 10:48:47 AM
Event time (UTC): 4/29/2006 2:48:47 AM
Event ID: 77910e6688484582bb1c29808feef883
Event sequence: 128
Event occurrence: 13
Event detail code: 0

Application information:
Application domain: /LM/W3SVC/24978983/Root/ph-3-127907437121075328
Trust level: Full
Application Virtual Path: /ph
Application Path: D:DB88ph
Machine name: 88DBWEB0

Process information:
Process ID: 1568
Process name: w3wp.exe
Account name: NT AUTHORITYNETWORK SERVICE

Exception information:
Exception type: SqlException
Exception message: A transport-level error has occurred when sending the request to the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.)

Request information:
Request URL: http://88db.jobsdb.com/ph/Views/MediaUpload.aspx?PostID=50202&Type=I&panelid=postimagediv
Request path: /ph/Views/MediaUpload.aspx
User host address: 192.168.10.10
User: 50077
Is authenticated: True
Authentication Type: Forms
Thread account name: NT AUTHORITYNETWORK SERVICE

Thread information:
Thread ID: 15
Thread account name: NT AUTHORITYNETWORK SERVICE
Is impersonating: False
Stack trace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParserStateObject.WriteSni()
at System.Data.SqlClient.TdsParserStateObject.ExecuteFlush()
at System.Data.SqlClient.TdsParser.TdsExecuteRPC(_SqlRPC[] rpcArray, Int32 timeout, Boolean inSchema, SqlNotificationRequest notificationRequest, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader()
at System.Web.SessionState.SqlSessionStateStore.DoGet(HttpContext context, String id, Boolean getExclusive, Boolean& locked, TimeSpan& lockAge, Object& lockId, SessionStateActions& actionFlags)

Custom event details:

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

View 10 Replies View Related

Framework 2.0 Changes - TCP Provider, Error: 0 - An Existing Connection Was Forcibly Closed By The Remote Host.

Nov 14, 2005

If you connect to a server and open a query in SQL Managment studio (2005) and looses connection and then regain the connection, when you try to run the query it gives me a "TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host." This happens against both 2005 and 2000 servers. If I re-run the query it works. However, this happens in our VB.NET app as well for clients with Wireless connections. So, something has changed in Framework 2.0 regarding this, does anyone know how to tell the client to not throw this error and just try connecting the server instead which will work?

View 105 Replies View Related

Error: Login Failed For User ... Microsoft Sql Native Client . In Remote Connection On Integration Service

Apr 10, 2007

Hi

i connect to remote Integration Service. i configure server for remote connection( on component services and DCOM config , ... ) .and now i can connect to Integration Service remotely and correctly.

but when i expand Stored Package and then click to expand MSDB this error will hapen:

login failed for user ... .(microsoft sql native client )

please help me

thanks in advance

View 1 Replies View Related

SQL Remote Connection Not Being Seen, Though Remote Connections Allowed

Oct 11, 2007

HiI'm going insane.I have a club starter kit on my local server which is working fine.I have migrated the database to my remote host and seems to have transfered ok.For a brief period I was able to connect to the database remotely, but now I cannot I get the following, even though SQL Server Surface Area Config is set to accept remote connections.An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)This is my connection string;<add name="ClubSiteDB" connectionString="Data Source=xx.xxx.xx.xx,xxxx; Network Library=DBMSSOCN; Initial Catalog=tets; User ID=sqladminbob;Password=sqlbob4398;" providerName="System.Data.SqlClient="/>I hav also tried to use aspnet_regsql.exe to add the remote provider but I get the same message. Thanks

View 3 Replies View Related

SSIS Project Failing To Run Even Though I Verified Remote Sybase Connection Via Connection Manager

Apr 7, 2008

When running the project in debug mode or non-debug mode, I get the following error from MS Visual Studio:

TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at Package [Connection manager "SYBASE_CONNECTION"]: The connection manager failed to defect from the transaction.
(Microsoft.DataTransformationServices.VsIntegration)
------------------------------
BUTTONS:
OK
------------------------------

Any ideas???

View 8 Replies View Related

Remote Connection Refused When Creating ODBC Connection To SQL Server 2005

Aug 30, 2006

When I create a new odbc connection to a SQL server 2005 Db I get a failure telling me dat de SQL server does not allow remote connections.

How can I allow the server to allow this.

Any help appreciated

regards

View 1 Replies View Related

SSIS Remote Connection Failing ... Local Connection OK

Mar 1, 2006

I'm getting "Access denied" error when I try to connect to SSIS from my desktop (Database Engine is fine). I'm a member of sysadmin within SQL, as well as an administrator on the server. I don't have any problem when I log on to the server directly via Remote Desktop and open SSIS.

I went into the surface area config tool, and I see that Database Engine and Analysis Services both expand and have a sub tabs to enable Services and Remote Connections, but Integration Services does not expand to a Remote Connections option, just Services. We're running MSDN Enterprise edition.

Does it matter if all the SQL services are using "Local System" for the logon ? I use an administrative logon on my SQL2000 boxes, and was fiddling with them on the 2005 box yesterday, but it seemed to cause more problems, so they are all Local System for now.

Am I missing something obvious ?

View 3 Replies View Related

Bcp Cannot Connect Via Local Connection, But Can Using Remote Connection?

May 19, 2008

Hi. I'm (very) new to SQL Server. I have run into what seems to be a very common problem, judging by the number of Google hits, but it's not actually in the FAQs here, as far as I can see.

Situation
I installed SQL Server Express with Advanced Services 2005 on my Windows XP Pro laptop, using (with one exception) the default install. The exception was to put the data files on a separate partition (D: ) where I have more free space.

SQL Server Management Studio Express connects happily, and I set up a single data import table.

Issue: bcp Fails to connect to default local instance
I initially tried bcp in output mode, prior to working in earnest on importing my data. However the command line-

bcp MyDatabaseName.dbo.UserProfile out UserProfile.txt -T -c

Fails with the error-

Error = [Microsoft][SQL Native Client]Named Pipes Provider: Could not open a connection to SQL Server [2].

As I understand it, the local instance of SSE is the default, and should use a local (shared memory?) connection. This seems to work for Management Studion Express, but not bcp.

While investigating this problem, I tried enabling remote connections (all types) through the Surface Area Configuration wizard, and found that remote connections using either of:

bcp eSpacePh1.dbo.UserProfile out UserProfile.txt -T -c -S localhostsqlexpress
bcp eSpacePh1.dbo.UserProfile out UserProfile.txt -T -c -S mycomputernamesqlexpress

both work ok.

Extra Info
When starting Management Studio Express, it says something like "Configuring environment for the first time". However it says this every time it is started, not just the first run after installation, does this indicate some configuration data is not being successfully stored?

I have found threads that look similar to my issue-

http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=836670&SiteID=1
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=3351349&SiteID=1

However these do not relate directly to bcp, and to be honest my knowledge of SSE is slender enough at this stage that i'm unsure if there are really relevant.

Any hints on how to proceed much appreciated.

Regards: Colin E.

View 6 Replies View Related

Remote Connections Enabled, But I Still Get Error That Remote Is Not Configured - Sql 2005

Aug 23, 2006

Fellow Devs,
I have an instance of SQL Server Express 2005 running on another box and I have Remote Connections enabled over both TCP/IP and Named Pipes, but on my other box I keep getting the error that the server does not accept Remote Connections.
Any ideas why this might be happening? Is there some other configuration?

View 25 Replies View Related

Remote Connection - Error 10053,10054