heywhen i try to search an "noise word" it drop me an ERRORwhat i have done : - stop full text service- remove the words i want ,from noise.enu , noise.eng , noise.dat (@@language = u.s...) the files is in system32 and in program files...config .- start full text service-rebuild and after that re populate the catalog
and it still drop me an ERROR !!! how can i resolve this prob ???
tnx tnx .
This is driving me nuts.
I recently moved a database from one server to another. One thing
I didn't catch is that I had a Full Text Catalog on the old server.
Well, on the new server, the catalog is still pointing to a disk
location that doesn't exist on the new server. I tried to remove
the catalog but get an error:
"Error 21776: The name 'Claims Catalog' was not found in the FullTextCatalogs collection....."
So, I go to the table and attempt to remove Full Text Indexing but get
the same error with: "Error 20565: Database is not full-text
enabled yet"
I tried to remove the indexing key from the table and get: "Invalid cursor state"
I even tried to fake a mapped drive with the path it was looking for and it still doesn't work.
Any suggestions other than dropping the table? (it has about 40,000 records).
Thanks!
cbmeeks
Hi,Just found out that this error can be solvedServer: Msg 7619, Level 16, State 1, Procedure usp_ft, Line 2A clause of the query contained only ignored words.triggered when executingSELECT TOP 1000 * FROM ADS JOIN ADSFULL ON ads_adid = fads_adidWHERE (ADS_ADID IN (SELECT FADS_ADID FROM ADSFULLWHERE (CONTAINS(*, '"opel" AND "and" AND "astra"'))))can be solved by changing the language specific file with noise words ...but that's not really an option in our server configuration.Now I wondered is there a way to query via TSQL a list of the noisewords ...so I can exclude them before parsing the query??I also dedected I can not catch the error in my stored procedure with theinstruction IF @@error ... So is it true that I can only handle this errorin my client software that calls the stored procedure??Thanks a lot.--Kind regards,Perre Van Wilrijk,Remove capitals to get my real email address,
View 2 Replies View RelatedI want to create a full-text catalog.But when I entered the catolog's name 'softonline' and put the yes button,the system always prompt me the words "An unknown full-text failure (80004005) occurred in function CreateCatalog on full-text catalog 'softonline'". How can I do? Thank you very much.
View 1 Replies View RelatedI want to develop a windows application using cshap 2.0 and sql express 2005. How can i attach a full text catalog in csharp? How can i deploy full text catalog to the client machine?
View 2 Replies View RelatedHope you can ignore your personal music tastes with this post!I have a table of Artists with a Full Text Index on a few columns on that table. My full text querying against this table works really well apart from it seems for one band - "Take That"! I'm guessing this is because these words consitute noise words? I parse user's search terms and add an "AND" between each word. So for example my query is essentially:select * from containstable(Artists, *, '"take AND that"') As I say, this works fine for Pink Floyd etc, but not for these guys! So either SQL Server has a preference on boy bands or I am thinking it is because these words are deemed to be noise. Anybody got any tips on how I could tackle this? I suppose it is quite possible that there might be another band with the same problem.I do have exclusive access to the SQL box, so perhaps I could edit the noise words file......Thanks
View 2 Replies View RelatedOnce I add new data I can only get search results to return if I rebuild my fulltext catalog, how do I stop this?thanks-c
View 2 Replies View RelatedI am trying to connect to a full text catalog in SQL. How do I do that? I tried using the same format as connecting to a table but it did not work.
View 1 Replies View RelatedWhen restoring a database that contained a full text catalog to another server I noticed that the full text catalogs were not restored. However, the system tables still had the information on these catalogs. As such, I couldn't delete the catalogs (because they didn't exist).
In the end, I deleted the relevant lines from the system table sysfulltextcatalogs and sysobjects and then built a new set of catalogs. Obviously this isn't ideal.
I am restoring databases to a backup/standby server on a regular basis and was wondering if there are any official/documented methods of restoring full text catalogs to another server. (i.e. without having to mess around with the system tables). There doesn't seem to be much in BOL.
Any pointers or ideas on this would be welcome.
Regards,
Karl
I have a database which has (god knows how) ended up with a Full text catalog which is believes is on the E: drive of the machine. The problem is that machine only has C: drive.
If I try and rebuid the catalog (sp_fulltext_catalog 'documents','rebuild') I get an error saying that e:... doesn't exist.
If I try and drop the catalog (sp_fulltext_catalog 'documents', 'drop'), I can't because it contains a full-text index.
If I try and drop remove the full text index from the table (sp_fulltext_table 'tbl_upload','drop'), I can't because Full-text catalog has been lost. Use sp_fulltext_catalog to rebuild and to repopulate it.
HELP
Does anybody know how to either drop it so that I can recreate it or how to update it so that it looks at a disk that the machine actually has?
Hello Everybody,
I have a really strange problem and i need your advice...
in one line:
creating full-text index bring to Rank = 0 when running FreeTextTable (although it shouldn't be).
in details:
when creating a new catalog on defining full-text index process, I finish the process successfully and then run a query (FreeTextTable) on the first time i get rank = 731, and after that get always rank=0. after checking every option in this process, try to use old catalog (belongs to different full-text search) it works perfectly.
does anyone has a clue?
thanks in advance,
Omer
Hi,
I'm not sure this is the right place for this thread but here goes.
I am trying to setup a full text catalog on one table in my database. Although the catalog is created fine and no erros are reported when creating or populating the catalog. It seems to be empty as its size is only 1Mb and my query:
select top 10* from kmuser.tbl_webpages
where contains (WebPageHTML_FT, '"aruba"'
returns no rows, while:
select * from kmuser.tbl_webpages
where webpagehtml_ft like '%aruba%'
returns 6 rows.
I have read several articles on the subject and have followed them to a T. I've deleted it and recreated so many times now both through Enterprise manager and through query analyser using the stored procedure sp_fulltext_catalog.
I've checked that full text catalog is enabled using:
select DATABASEPROPERTY(DB_NAME(), N'IsFullTextEnabled')
I am really stuck. Does anyone have any ideas?
Many thanks
How can I get all the properties in t-sql that are shown in the full-text catalog properties dialog box in enterprise manager? The one I am specifically looking for is "Physical Catalog". I know Location, Status, Item Count, Catalog Size, and Last Population Date can come from FULLTEXTCATALOGPROPERTY or sysfulltextcatalogs. So where is "Physical Catalog"?
View 2 Replies View RelatedHi,
I am trying to setup a full text catalog on one table in my database. Although the catalog is created fine and no erros are reported when creating or populating the catalog. It seems to be empty as its size is only 1Mb and my query:
select top 10* from kmuser.tbl_webpages
where contains (WebPageHTML_FT, '"aruba"'
returns no rows, while:
select * from kmuser.tbl_webpages
where webpagehtml_ft like '%aruba%'
returns 6 rows.
I have read several articles on the subject and have followed them to a T. I've deleted it and recreated so many times now both through Enterprise manager and through query analyser using the stored procedure sp_fulltext_catalog.
I've checked that full text catalog is enabled using:
select DATABASEPROPERTY(DB_NAME(), N'IsFullTextEnabled')
I am really stuck. Does anyone have any ideas? Btw I am using SQL Server 2000 still
Many thanks
By default MS FTS split text by space (' ').
How to configure it to split text by underline ('_') ?
Thanks
Hello,
I use the full-text search utility in SQL Server 2005 to find word in PDFs document.
This is my 'Documents' table:
id (PK), data (VarBinary(max)), extension (nvarchar(4))
My full-text catalog on 'data' column works fine because when I search 'Microsoft', my document containing this word is returned as result.
SELECT * FROM Documents WHERE freetext([data], 'Microsoft');
1 , 0x255044...., .pdf
But I need to know how many times 'Microsoft' word appears in this document.
Do you have any idea how can I retrieve this information?
Thanks in advance!
We are using fulltextsearch, with the FREETEXT command.
This works very well for us, but we would like to highlight all forms of matched words in the text.
This is used in a website, and now the highlighting of the found words is limited to the exact matches of the searched words.
So it often happens that in a text there is no exact match of the searched words, but another form of that word.
Does anyone know if and how this problem can be fixed ?
I have a database that I just copy its datafile(.mdf) and the log file to another place in my system. Due to the fact that the sql server instance developed internal error, then i have to forcefully uninstall it and later install it (done successfully). After re-installation, I attach the database file back to the package withoou first and foremost copy it to the Data folder in sql server directory, but rather from where I kept the file. When I decided to create a full-text sraching on a table, the name of the catalog to be used has been afore-configured before. So I decided not to create a new one, then when I applied ful-text indexing on one the table i have index use the procedure (full-text indexing), an error generate sayingFull-text catalog is in an unusable state. I tried to google it and the advice is to drop the catalog and re-create a new catalog. Then when i use this statementdrop fulltext catalog <name>; Error is prompted saying it can not be commited because of the associated table(s) that have been indexing. Is there any way to easily drop all these indexes and re-create another catalog as well as a new indexing on the affected tables. Any suggestions/help is welcome. Very urgentthanksTechnology Consultantwww.legwork.com.ng
View 2 Replies View RelatedHi there,
First off: I know that MSDE can't handle Full Text Catalogs.
Now I'd like to know if someone knows about a product or method which I could use that would give me the same result and work with MSDE.
The reason I ask is the following:
We have developed an Intranet application based upon MS Sharepoint Portal Server 2003 for Document Management purposes. Every Document has about 20 customized Properties which can be set. We do have an extensive interface for searching these documents
Now every user can have his "Favorite Documents" in a personal location.
What we are doing now is a "Local" version of this application. It will not allow documents to be modifed and will export the Users Favorites to his personal Computer.
For the moment we store everything (including the documents themselves) in a local MSDE Database.
Now we were recently asked to allow the user to search these local documents. Or at least search for documents with specific properties(i.e. no content indexing needed)
However I don't know how to go about this.
The structure I have for the DB is following
tblFiles
FileGUID FileName
1 Doc1
2 Doc2
tblProperties
PropertyGUID PropertyName
1 Name
2 Author
tblFileProperties
FileGUID PropertyGUID Value
1 1 Test Document.doc
1 2 John Smith
2 1 Dcoument for testing.xls
2 2 John Doe
Now you get the idea
We want to user to be able to specify search criteria for multiple properties
e.g. return every Document where Author Like 'John' and Name Like 'Document'
Preferably we should also be able to use wildcars. But that is not abolutely necessary for the moment.
Now I guess to achieve this I'd need a full text Search Catalog on tblFileProperties.Value, but I'm not even sure about that.
Any help please
RizziMan
I got following meesage, when i doing search, please helpMicrosoft OLE DB Provider for ODBC Drivers error '80040e14' [Microsoft][ODBC SQL Server Driver][SQL Server]Search on full-text catalog 'CCM_FT_Catalog' for database ID 10, table ID 987150562 with search condition '11' failed with unknown result (3a8d75c).
View 1 Replies View RelatedI have made a full text catalog for my article table, and enabled "change tracking" and "update in background", this works just the way its supposed to work, a little delay before I can search in the entered text, but thats not a problem.
The Problem is when I restart the server, then it forgets the things it has indexed in the background, and it doesnt seem to enable the "update in background"-feature, before I manually starts population the first time.
How can I set it to start population on server startup, and remember the things it indexes in the background?
i want to be able to do full text searches on a table that i have that already has data in it.. i created a new catalog, then started incremenetal population.. but nothing happened? will it only catalog the new data thats been entered into the table after i start incremental update? so since i have data in teh table already, would i need to do a full population first before i start incremenetal population?
thanks!
I am in a dilemma if I should reorganize or rebuild a full text catalog.
My application owner does not want a rebuild as he says that it takes week for the rebuild to occur on these full text indexes.
Will this code just re-organize without turning off the full text indexes : Alter fulltext catalog catalog_name Reorganize
I have an SQL 2005 Express Advanced database that also has a full text catalog.
My application creates .bak backups of the sql database, but how do I create backups of the full text catalog?
many thanks in advance
Hi,
Hope this is the right forum - apologies if its not. I'm a newbie. I'm at my wits end as I cant create a full-text catalog in SQL server 2000. Let me explain (I'll try and include as much info as I can):-
When I run the following command:
sp_fulltext_catalog 'Cat_Desc', 'create'
I get the following error mesaage:
Server: Msg 7619, Level 16, State 2, Procedure sp_fulltext_catalog, Line 64
The specified object cannot be found. Specify the name of an existing object.
I in as user sa. I determine this from running:
select suser_sname()
The SQL Server instance is running under user: LocalSystem
I determine this from the following command:
DECLARE @serviceaccount varchar(100)
EXECUTE master.dbo.xp_instance_regread
N'HKEY_LOCAL_MACHINE',
N'SYSTEMCurrentControlSetServicesMSSQLSERVER',
N'ObjectName',
@ServiceAccount OUTPUT,
N'no_output'
SELECT @Serviceaccount
The database is owned by: sa (determined by visual inspection).
Yes, full text indexing is enabled for this database as I ran the following command:
EXEC sp_fulltext_database 'enable'
and get the following:
(1 row(s) affected)
(0 row(s) affected)
(1 row(s) affected)
Now I can't think of anything else. I'm at my wits end! Please help. Any comments/suggestions/ideas/diagnostics greatly appreciated.
Thank you,
Al.
PS: Apologies if I'm in the wrong forum!
Hi
I have a sql 2000 db which has a table that has a compound key, the problem is that I would like to create a Full Text Catalog for this table. However I noticed that i need a single primary key... but I dont have one.
I created another field on my table called "ftcID" as an int with identity set to Yes
However when I try and create a catalog it doesnt detect that this field is unique.
Does my unique field have to be a Primary Key, I cant remove the compound primary key as it will break my application.
Any help would be much appreciated
Many thanks in advance
During a server upgrade somehow the full-text catalog for a databasewas lost. Now when I go into Enterprise manager I can't remove the oldcatalog or create a new one!How do I get rid of the current broken catalog and start a fresh?
View 3 Replies View Related
I have Googled the terms 'move path change full-text index catalog' and have come up with nothing that pertains to SQL 2005...only 2000 and 7.0....
So my question remains, how the heck do you change the location of the full-text catalog in SQL 2005? Must I delete and re-create? If so is there a good article on this process? I don't want to loose data or screw anything up....I can't imagine I am the first person who wants to do his?????
When I try to create a full-text catalog on my local database I get an error that I can not find support information for.
Here is the command I run :CREATE FULLTEXT CATALOG asset_search_values_catalog on FILEGROUP ftFileGroup IN PATH 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData' as default
Here is the error message I get:
Msg 7689, Level 16, State 1, Line 1
Execution of a full-text operation failed. 'No such interface supported'
I check the properties of my database and Full-text is enabled.
I am running SQL Server 2005, on an XP Pro, SP2.
I had originially installed in side by side with SQL Server 2000.
I even tried uninstalling SQL Server 2005 (to try a re-install), I could not even uninstall the database.
What should I do.
We are running a full text index on a single field in one table. The catalogs have grown to over 53GB. Is there a way to shrink these down?
Thanks,
Scott
how to completly disable noise words checking in full-text query?
(noise dictionaries already cleared!)
Hello,
I use the full-text search utility in SQL Server 2005 to find word in PDFs document.
This is my 'Documents' table:
id (PK), data (VarBinary(max)), extension (nvarchar(4))
My full-text catalog on 'data' column works fine because when I search 'Microsoft', my document containing this word is returned as result.
SELECT * FROM Documents WHERE freetext([data], 'Microsoft');
1 | 0x255044.... | .pdf
But I need to know how many times 'Microsoft' word appears in this document.
Do you have any idea how can I retrieve this information?
Thanks in advance!
Is there a way to make full text search which supports search terms for words with symbols, like C#, C++ etc.?
I see that even this forum, if I try search for C++, it returns everything where letter c exists. So, it's not possible I guess?