I have inherited a poorly administered/maintained database that
contains the following error:
"I/O error (torn page) detected during read at offset 0x000018ee23e000
in file 'F:Program FilesISSRealSecure SiteProtectorSite
DatabaseDataRealSecureDB.mdf"
I do not have database backups and so therefore cannot restore from
them. I want to move the database to a new platform and somehow
repair the torn page. Is this possible?
I got help from Dan Guzman on how to set single-user-mode.Thank you very much.After seting single-user-mode, I run DBCC CHECKDB('MYDATABASE',REPAIR_REBUILD)Tehre are error messages.How can I repair torn page problem?Thanks.*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedHello,
I'm wondering if anyone has any insight as to what happened here. We had a DBCC checkdb error as follows:
Server: Msg 8946, Level 16, State 12, Line 2
Table error: Allocation page (16:3769008) has invalid PFS_PAGE page header values. Type is 0. Check type, object ID and page ID on the page.
So we then ran:
dbcc traceon(3604)
go
dbcc page (<dbname>,16,3769008,1,0)
go
dbcc traceoff(3604)
go
and got:
Server: Msg 8939, Level 16, State 98, Line 1
Table error: Object ID 99, index ID 0, page (16:3769008). Test (IS_ON (BUF_IOERR, bp->bstat) &&bp->berrcode) failed. Values are 2057 and -1.
PAGE: (16:3769008)
------------------
BUFFER:
-------
BUF @0x00FE0640
---------------
bpage = 0x76F22000 bhash = 0x00000000 bpageno = (16:3769008)
bdbid = 6 breferences = 1 bstat = 0x809
bspin = 0 bnext = 0x00000000
PAGE HEADER:
------------
Page @0x76F22000
----------------
m_pageId = (16:3769008) m_headerVersion = 1 m_type = 11
m_typeFlagBits = 0x0 m_level = 0 m_flagBits = 0x0
m_objId = 99 m_indexId = 0 m_prevPage = (0:0)
m_nextPage = (0:0) pminlen = 0 m_slotCnt = 1
m_freeCnt = 2 m_freeData = 8188 m_reservedCnt = 0
m_lsn = (3975:179853:10) m_xactReserved = 0 m_xdesId = (0:0)
m_ghostRecCnt = 0 m_tornBits = 2
Allocation Status
-----------------
GAM (16:3578624) = NOT ALLOCATED
SGAM (16:3578625) = NOT ALLOCATED
PFS (16:3769008) = 0x0 0_PCT_FULL
DIFF (16:3578630) = NOT CHANGED
ML (16:3578631) = NOT MIN_LOGGED
DATA:
-----
Slot 0, Offset 0x4040
---------------------
Row at offset 16448 may be corrupt.
Hex dump of remaining -8258 bytes:
The database is not marked suspect and we have backups to restore, if necessary, but I'm wondering if anyone can interpret what the dbcc commands are telling us and how we can diagnosis what's happening...
Thanks!
Jason
Hi all. I'm getting an error mssage which tells me I have a torn page:ODBC error 823 (HY000) I/O error (torn page) detected during read atoffset 0x00000080b5c000 in file 'D:WINSUPPORTDATAWin SupportDatabase_2_Data.NDF'.I ran DBCC CHECKDB and it returned no errors:CHECKDB found 0 allocation errors and 0 consistency errors in database'WIN Support Database'.I really don't know what to do at this point. I'm not a databaseadministrator, just a programmer, and our DBA is not here. Anysuggestions?Thanks,Jennifer
View 1 Replies View RelatedAnyone working with databases with this option turned on? How does it affect performance?
View 3 Replies View RelatedWe received the following errors:
1) Error: 823, Severity: 24, State:
2) I/O error (torn page) detected during read at offset 0x0000001455a000..erc
Network team thinks this was caused by low disk space. I was running a database shrink last night, and someone had transferred a file to server prior to my job that took 90% of disk. My shrink job failed and then 20 minutues later we satrted to recieve the two above mentioined.
Can a failed shrink job - which failed due to low disk space cause a torn page to occur? I have not heard of this...
Hi, We recently had one of our drives (RAID5) replaced because of failure. This has resulted in a torn page being detected on one of our smaller SQL 2000 databases. We have one or two larger SQL databases (30-70GB) on the same drive amongst several others and are now concerned that we may have a problem with these databases also. (The original torn page only came to light when a query was run on one of the tables). Is there anyway I can run a procedure on each of the databases to find out if we have any problems with torn pages? I obviously don't want to restore the databases as this will take a substantial amount of time that we just don't have at the moment. Any ideas that could put our minds at rest would be much appreciated.
Many thanks.
hi all...
my prod database facing the problem i mention. it show this error when i run some of the query.
Error: 823, Severity: 24, State: 2
I/O error (torn page) detected during read at offset 0x000000ffd0e000 in file 'F:dsUnit'.
i running dbcc checkdb on it. this is the result
DBCC results for 'dsActive3'.
DBCC results for 'sysobjects'.
There are 472 rows in 8 pages for object 'sysobjects'.
DBCC results for 'sysindexes'.
There are 728 rows in 39 pages for object 'sysindexes'.
DBCC results for 'syscolumns'.
There are 4243 rows in 106 pages for object 'syscolumns'.
DBCC results for 'systypes'.
There are 26 rows in 1 pages for object 'systypes'.
DBCC results for 'syscomments'.
There are 281 rows in 66 pages for object 'syscomments'.
DBCC results for 'sysfiles1'.
There are 7 rows in 1 pages for object 'sysfiles1'.
DBCC results for 'syspermissions'.
There are 49 rows in 1 pages for object 'syspermissions'.
DBCC results for 'sysusers'.
There are 13 rows in 1 pages for object 'sysusers'.
DBCC results for 'sysproperties'.
There are 0 rows in 0 pages for object 'sysproperties'.
DBCC results for 'sysdepends'.
There are 2776 rows in 18 pages for object 'sysdepends'.
DBCC results for 'sysreferences'.
There are 26 rows in 1 pages for object 'sysreferences'.
DBCC results for 'sysfulltextcatalogs'.
There are 0 rows in 0 pages for object 'sysfulltextcatalogs'.
DBCC results for 'sysfulltextnotify'.
There are 0 rows in 0 pages for object 'sysfulltextnotify'.
DBCC results for 'sysfilegroups'.
There are 4 rows in 1 pages for object 'sysfilegroups'.
DBCC results for 'INSTRUCTION'.
There are 0 rows in 0 pages for object 'INSTRUCTION'.
DBCC results for 'DATASWEEP_CODES'.
There are 180 rows in 4 pages for object 'DATASWEEP_CODES'.
DBCC results for 'DATASWEEP_SEQUENCE'.
There are 7 rows in 1 pages for object 'DATASWEEP_SEQUENCE'.
DBCC results for 'OPERATION'.
There are 52 rows in 1 pages for object 'OPERATION'.
DBCC results for 'Results'.
There are 2 rows in 1 pages for object 'Results'.
DBCC results for 'DC_BLOB'.
There are 8 rows in 1 pages for object 'DC_BLOB'.
DBCC results for 'PRODUCTION_LINE'.
There are 2 rows in 1 pages for object 'PRODUCTION_LINE'.
DBCC results for 'DS_PERSISTENT_OBJECT'.
There are 5 rows in 1 pages for object 'DS_PERSISTENT_OBJECT'.
DBCC results for 'EQUIPMENT'.
There are 0 rows in 0 pages for object 'EQUIPMENT'.
DBCC results for 'RESOURCE_CONDITION'.
There are 2 rows in 1 pages for object 'RESOURCE_CONDITION'.
DBCC results for 'IMAGE_BLOB'.
There are 0 rows in 0 pages for object 'IMAGE_BLOB'.
DBCC results for 'ROUTE'.
There are 125 rows in 2 pages for object 'ROUTE'.
DBCC results for 'JOB_CONFIG'.
There are 19 rows in 1 pages for object 'JOB_CONFIG'.
DBCC results for 'UNIT_CHECKLIST'.
There are 0 rows in 0 pages for object 'UNIT_CHECKLIST'.
DBCC results for 'JOB_SCHEDULE'.
There are 10 rows in 1 pages for object 'JOB_SCHEDULE'.
DBCC results for 'LOCATION'.
There are 1 rows in 1 pages for object 'LOCATION'.
DBCC results for 'WORK_ORDER_ITEMS'.
There are 4375 rows in 139 pages for object 'WORK_ORDER_ITEMS'.
DBCC results for 'NOTE_BLOB'.
There are 0 rows in 0 pages for object 'NOTE_BLOB'.
DBCC results for 'ROUTE_STEP'.
There are 599 rows in 13 pages for object 'ROUTE_STEP'.
DBCC results for 'PART'.
There are 1827 rows in 69 pages for object 'PART'.
Server: Msg 8928, Level 16, State 1, Line 1
Object ID 475148738, index ID 0: Page (5:610106) could not be processed. See other errors for details.
Server: Msg 8939, Level 16, State 1, Line 1
Table error: Object ID 475148738, index ID 0, page (5:610106). Test (IS_ON (BUF_IOERR, bp->bstat) &&bp->berrcode) failed. Values are 2057 and -1.
Server: Msg 8928, Level 16, State 1, Line 1
Object ID 475148738, index ID 0: Page (5:610107) could not be processed. See other errors for details.
Server: Msg 8939, Level 16, State 1, Line 1
Table error: Object ID 475148738, index ID 0, page (5:610107). Test (IS_ON (BUF_IOERR, bp->bstat) &&bp->berrcode) failed. Values are 2057 and -1.
Server: Msg 8928, Level 16, State 1, Line 1
Object ID 475148738, index ID 0: Page (5:610165) could not be processed. See other errors for details.
Server: Msg 8939, Level 16, State 1, Line 1
Table error: Object ID 475148738, index ID 0, page (5:610165). Test (IS_ON (BUF_IOERR, bp->bstat) &&bp->berrcode) failed. Values are 2057 and -1.
Server: Msg 8928, Level 16, State 1, Line 1
Object ID 475148738, index ID 0: Page (5:610166) could not be processed. See other errors for details.
Server: Msg 8935, Level 16, State 1, Line 1
Table error: Object ID 475148738, index ID 1. The previous link (5:611693) on page (5:610224) does not match the previous page (5:610106) that the parent (5:614865), slot 80 expects for this page.
DBCC results for 'DS_TABLESPACE_MAP'.
There are 6 rows in 1 pages for object 'DS_TABLESPACE_MAP'.
DBCC results for 'BOM_PART_LIST'.
There are 9927 rows in 196 pages for object 'BOM_PART_LIST'.
DBCC results for 'SITE_INFO'.
There are 1 rows in 1 pages for object 'SITE_INFO'.
DBCC results for 'RESOURCE_ARC'.
There are 2 rows in 1 pages for object 'RESOURCE_ARC'.
DBCC results for 'CARRIER_COMPARTMENT'.
There are 0 rows in 0 pages for object 'CARRIER_COMPARTMENT'.
DBCC results for 'RESOURCE_QUEUE'.
There are 2 rows in 1 pages for object 'RESOURCE_QUEUE'.
DBCC results for 'TRX_BASE'.
Server: Msg 8936, Level 16, State 1, Line 1
Table error: Object ID 475148738, index ID 1. B-tree chain linkage mismatch. (5:610618)->next = (5:610224), but (5:610224)->Prev = (5:611693).
Server: Msg 8981, Level 16, State 1, Line 1
Table error: Object ID 475148738, index ID 1. The next pointer of (5:610619) refers to page (5:610343). Neither (5:610343) nor its parent were encountered. Possible bad chain linkage.
Server: Msg 8934, Level 16, State 1, Line 1
Table error: Object ID 475148738, index ID 1. The high key value on page (5:610616) (level 0) is not less than the low key value in the parent (0:1), slot 0 of the next page (5:610618).
Server: Msg 8935, Level 16, State 1, Line 1
Table error: Object ID 475148738, index ID 1. The previous link (5:611693) on page (5:610618) does not match the previous page (5:610616) that the parent (5:614865), slot 94 expects for this page.
Server: Msg 8936, Level 16, State 1, Line 1
Table error: Object ID 475148738, index ID 1. B-tree chain linkage mismatch. (5:610616)->next = (5:610618), but (5:610618)->Prev = (5:611693).
Server: Msg 8935, Level 16, State 1, Line 1
Table error: Object ID 475148738, index ID 1. The previous link (5:611693) on page (5:610619) does not match the previous page (5:610618) that the parent (5:614865), slot 95 expects for this page.
Server: Msg 8978, Level 16, State 1, Line 1
Table error: Object ID 475148738, index ID 1. Page (5:610619) is missing a reference from previous page (5:611693). Possible chain linkage problem.
Server: Msg 8935, Level 16, State 1, Line 1
Table error: Object ID 475148738, index ID 1. The previous link (5:611693) on page (5:610620) does not match the previous page (5:610619) that the parent (5:614865), slot 96 expects for this page.
Server: Msg 8978, Level 16, State 1, Line 1
Table error: Object ID 475148738, index ID 1. Page (5:610620) is missing a reference from previous page (5:611693). Possible chain linkage problem.
Server: Msg 8978, Level 16, State 1, Line 1
Table error: Object ID 475148738, index ID 1. Page (5:610622) is missing a reference from previous page (5:610620). Possible chain linkage problem.
Server: Msg 8928, Level 16, State 1, Line 1
Object ID 587149137, index ID 0: Page (4:523911) could not be processed. See other errors for details.
Server: Msg 8939, Level 16, State 1, Line 1
Table error: Object ID 587149137, index ID 0, page (4:523911). Test (IS_ON (BUF_IOERR, bp->bstat) &&bp->berrcode) failed. Values are 2057 and -1.
There are 67236767 rows in 2321938 pages for object 'TRX_BASE'.
CHECKDB found 0 allocation errors and 18 consistency errors in table 'TRX_BASE' (object ID 475148738).
DBCC results for 'CHECKLIST_ITEM'.
There are 0 rows in 0 pages for object 'CHECKLIST_ITEM'.
DBCC results for 'DCS_LIST'.
There are 0 rows in 0 pages for object 'DCS_LIST'.
DBCC results for 'DCS_PARM'.
There are 253 rows in 7 pages for object 'DCS_PARM'.
DBCC results for 'RESOURCE_QUEUE_LINK'.
There are 2 rows in 1 pages for object 'RESOURCE_QUEUE_LINK'.
DBCC results for 'RESOURCE_ROUTE'.
There are 1 rows in 1 pages for object 'RESOURCE_ROUTE'.
DBCC results for 'DS_OBJECT_BLOB'.
There are 45 rows in 1 pages for object 'DS_OBJECT_BLOB'.
DBCC results for 'TEST_INSTANCE'.
There are 5836487 rows in 159046 pages for object 'TEST_INSTANCE'.
DBCC results for 'FORM_BLOB'.
There are 647 rows in 4 pages for object 'FORM_BLOB'.
DBCC results for 'ROUTE_ARC'.
There are 1047 rows in 9 pages for object 'ROUTE_ARC'.
DBCC results for 'UNIT'.
There are 5139230 rows in 309518 pages for object 'UNIT'.
CHECKDB found 0 allocation errors and 2 consistency errors in table 'UNIT' (object ID 587149137).
DBCC results for 'INSTRUCTION_BLOB'.
There are 0 rows in 0 pages for object 'INSTRUCTION_BLOB'.
DBCC results for 'ROUTE_QUEUE'.
There are 599 rows in 5 pages for object 'ROUTE_QUEUE'.
DBCC results for 'INSTRUCTION_LIST'.
There are 0 rows in 0 pages for object 'INSTRUCTION_LIST'.
DBCC results for 'LOT'.
There are 313 rows in 12 pages for object 'LOT'.
DBCC results for 'ROUTE_QUEUE_LINK'.
There are 599 rows in 9 pages for object 'ROUTE_QUEUE_LINK'.
DBCC results for 'SCHEMA_VERSION'.
There are 2 rows in 1 pages for object 'SCHEMA_VERSION'.
DBCC results for 'PRODUCT_ROUTE_P_LINE_REL'.
There are 0 rows in 0 pages for object 'PRODUCT_ROUTE_P_LINE_REL'.
DBCC results for 'SERIAL_NUMBER'.
There are 1 rows in 1 pages for object 'SERIAL_NUMBER'.
DBCC results for 'PRODUCT_RS_WC_REL'.
There are 0 rows in 0 pages for object 'PRODUCT_RS_WC_REL'.
DBCC results for 'RESOURCE_STEP'.
There are 2 rows in 1 pages for object 'RESOURCE_STEP'.
DBCC results for 'STATION'.
There are 53 rows in 1 pages for object 'STATION'.
DBCC results for 'SUBROUTINE_BLOB'.
There are 354 rows in 2 pages for object 'SUBROUTINE_BLOB'.
DBCC results for 'TMPL_TBOM'.
There are 2 rows in 1 pages for object 'TMPL_TBOM'.
DBCC results for 'TBOM_PART_LIST'.
There are 0 rows in 0 pages for object 'TBOM_PART_LIST'.
DBCC results for 'TMPL_TBOM_PART_LIST'.
There are 0 rows in 0 pages for object 'TMPL_TBOM_PART_LIST'.
DBCC results for 'TRX_CARRIER'.
There are 0 rows in 0 pages for object 'TRX_CARRIER'.
DBCC results for 'TRACKED_OBJECT_HISTORY'.
There are 18576505 rows in 922365 pages for object 'TRACKED_OBJECT_HISTORY'.
DBCC results for 'TRX_CONSUMPTION'.
There are 0 rows in 0 pages for object 'TRX_CONSUMPTION'.
DBCC results for 'TRACKED_OBJECT_STATUS'.
There are 5461496 rows in 587509 pages for object 'TRACKED_OBJECT_STATUS'.
DBCC results for 'TRX_GENEALOGY'.
There are 0 rows in 0 pages for object 'TRX_GENEALOGY'.
DBCC results for 'XFR_DELETION_LOG'.
There are 21699 rows in 279 pages for object 'XFR_DELETION_LOG'.
DBCC results for 'UNIT_CHECKLIST_ITEM'.
There are 0 rows in 0 pages for object 'UNIT_CHECKLIST_ITEM'.
DBCC results for 'XFR_EXTRACT_LOG'.
There are 7150 rows in 289 pages for object 'XFR_EXTRACT_LOG'.
DBCC results for 'DS_LIST_ITEM'.
There are 800 rows in 11 pages for object 'DS_LIST_ITEM'.
DBCC results for 'HIERARCHY_LEVEL'.
There are 10 rows in 5 pages for object 'HIERARCHY_LEVEL'.
DBCC results for 'XFR_LOAD_LOG'.
There are 0 rows in 0 pages for object 'XFR_LOAD_LOG'.
DBCC results for 'XFR_SCHEMA_OBJECT'.
There are 87 rows in 2 pages for object 'XFR_SCHEMA_OBJECT'.
DBCC results for 'XFR_UPDATE_RELATIONSHIPS'.
There are 37 rows in 1 pages for object 'XFR_UPDATE_RELATIONSHIPS'.
DBCC results for 'BOX'.
There are 305676 rows in 7968 pages for object 'BOX'.
DBCC results for 'USER_SEQUENCE'.
There are 0 rows in 0 pages for object 'USER_SEQUENCE'.
DBCC results for 'DC_dst_CorrectiveAction'.
There are 0 rows in 0 pages for object 'DC_dst_CorrectiveAction'.
DBCC results for 'ACCOUNT'.
There are 1 rows in 1 pages for object 'ACCOUNT'.
DBCC results for 'DC_dst_ShiftDefinition'.
There are 0 rows in 0 pages for object 'DC_dst_ShiftDefinition'.
DBCC results for 'DC_dst_5DX'.
There are 0 rows in 0 pages for object 'DC_dst_5DX'.
DBCC results for 'XFR_INTERVAL_ID'.
There are 10327 rows in 27 pages for object 'XFR_INTERVAL_ID'.
DBCC results for 'DC_dst_ComponentLocation'.
There are 0 rows in 0 pages for object 'DC_dst_ComponentLocation'.
DBCC results for 'PROCESS_CONTROL'.
There are 0 rows in 0 pages for object 'PROCESS_CONTROL'.
DBCC results for 'DC_dst_Account'.
There are 0 rows in 0 pages for object 'DC_dst_Account'.
DBCC results for 'REFERENCE_DESIGNATOR'.
There are 9927 rows in 51 pages for object 'REFERENCE_DESIGNATOR'.
DBCC results for 'DC_dst_PasteMeasurement'.
There are 0 rows in 0 pages for object 'DC_dst_PasteMeasurement'.
DBCC results for 'TEST_DEFINITION'.
There are 4 rows in 1 pages for object 'TEST_DEFINITION'.
DBCC results for 'DC_dst_ReportActionLog'.
There are 0 rows in 0 pages for object 'DC_dst_ReportActionLog'.
DBCC results for 'DC_dst_CAR_NCR'.
There are 0 rows in 0 pages for object 'DC_dst_CAR_NCR'.
DBCC results for 'TEST_RESULT'.
There are 10376737 rows in 199778 pages for object 'TEST_RESULT'.
DBCC results for 'DC_dst_NonConObject'.
There are 0 rows in 0 pages for object 'DC_dst_NonConObject'.
DBCC results for 'DEFECT_REPAIR_ENTRY'.
There are 3240433 rows in 169991 pages for object 'DEFECT_REPAIR_ENTRY'.
DBCC results for 'DC_dstr_UserFormAndReports'.
There are 4 rows in 1 pages for object 'DC_dstr_UserFormAndReports'.
DBCC results for 'SITE_CONFIG'.
There are 1 rows in 1 pages for object 'SITE_CONFIG'.
DBCC results for 'DC_dst_NonConformance'.
There are 0 rows in 0 pages for object 'DC_dst_NonConformance'.
DBCC results for 'BOM'.
There are 173 rows in 4 pages for object 'BOM'.
DBCC results for 'DC_dstr_GroupSecurity'.
There are 1 rows in 1 pages for object 'DC_dstr_GroupSecurity'.
DBCC results for 'DC_dst_RMA_SerialNumber'.
There are 82197 rows in 7129 pages for object 'DC_dst_RMA_SerialNumber'.
DBCC results for 'SUBROUTINE'.
There are 354 rows in 10 pages for object 'SUBROUTINE'.
DBCC results for 'DC_dst_DPMO_Information'.
There are 0 rows in 0 pages for object 'DC_dst_DPMO_Information'.
DBCC results for 'TBOM'.
There are 5139874 rows in 64048 pages for object 'TBOM'.
DBCC results for 'DC_dst_LineSchedule'.
There are 0 rows in 0 pages for object 'DC_dst_LineSchedule'.
DBCC results for 'DC_dst_ECO_Details'.
There are 0 rows in 0 pages for object 'DC_dst_ECO_Details'.
DBCC results for 'HN_dst_PartDimension'.
There are 1053 rows in 19 pages for object 'HN_dst_PartDimension'.
DBCC results for 'DC_dst_ECO_Header'.
There are 0 rows in 0 pages for object 'DC_dst_ECO_Header'.
DBCC results for 'WORK_CENTER'.
There are 0 rows in 0 pages for object 'WORK_CENTER'.
DBCC results for 'ICT_Tester_Name'.
There are 39 rows in 1 pages for object 'ICT_Tester_Name'.
DBCC results for 'WORK_ORDER'.
There are 4397 rows in 164 pages for object 'WORK_ORDER'.
DBCC results for 'DS_LIST'.
There are 72 rows in 2 pages for object 'DS_LIST'.
DBCC results for 'HN_dst_StationDimension'.
There are 1 rows in 1 pages for object 'HN_dst_StationDimension'.
DBCC results for 'HIERARCHY'.
There are 2 rows in 1 pages for object 'HIERARCHY'.
DBCC results for 'CARRIER'.
There are 0 rows in 0 pages for object 'CARRIER'.
DBCC results for 'CHECKLIST'.
There are 1 rows in 1 pages for object 'CHECKLIST'.
DBCC results for 'DBPS'.
There are 1 rows in 1 pages for object 'DBPS'.
DBCC results for 'DCS'.
There are 17 rows in 1 pages for object 'DCS'.
DBCC results for 'APP_USER'.
There are 2078 rows in 197 pages for object 'APP_USER'.
DBCC results for 'DS_OBJECT'.
There are 45 rows in 2 pages for object 'DS_OBJECT'.
DBCC results for 'dtproperties'.
There are 0 rows in 0 pages for object 'dtproperties'.
DBCC results for 'CHECKOUT_ITEM'.
There are 0 rows in 0 pages for object 'CHECKOUT_ITEM'.
DBCC results for 'FORM'.
There are 647 rows in 15 pages for object 'FORM'.
DBCC results for 'CONSUMED_PART'.
There are 0 rows in 0 pages for object 'CONSUMED_PART'.
CHECKDB found 0 allocation errors and 20 consistency errors in database 'dsActive3'.
repair_allow_data_loss is the minimum repair level for the errors found by DBCC CHECKDB (dsActive3 ).
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
now the main problem is when i restore the latest backup i have. it also facing the problem. the other backup i got is one more week older than this.
can anyone help me? i cant affort to has 2 week data loss
I want to switch this setting off on all db's - that's easy.
But I presume that means the problem could occur without me knowing for weeks (maybe due to a defective disk driver). So is there a way I can schedule a maintainance task that will check for this problem out of hours? (Maybe by switching the DB option on for a while and then back off? If you switch the option on, does it check the whole database? Or does it just do checks during the actual update?) Hopefully there is a better way than that to do it...
Also, am I right in saying that CHECKSUM is new to 2005?
And what do you guys use: Checksum, Torn Page Detection or None?
How much of a performance impact will using Cheksum have over Torn Page Detection for Page Verify Recovery? Thanks
View 3 Replies View RelatedHiWhen trying to create an SqlServer job, clicking OK' I got the message"Error 823: I/O error (torn page) detected during read at offset..... infile 'd:sqlserverMSSQLdatamsdata.mdf'. The job was not saved"I asked about the problem a little to find out that I need to restore abackup of MSdb because the job definitions are there. I rrad some otherplace (I can't remember where) that in order to restore MSdb I need torestore a backup of Master as well.Can anyone give me some more information on this.Is there any way else to do it besides restoring the backup ?To restore, do I need to recreate the database or just restore theappropiate backup file ?David Greenberg
View 1 Replies View RelatedHi all,One of my database was suspected, So I try to recover database then itgives this errorErr. 823 Torn Page Detected823, ... 24, spid51 i/o error Torn Page (Detected)during read at offset 0x0000000040e0000 in file .........How can I recover my SQL Server 2000 Database? Please helpThanks
View 6 Replies View RelatedAre there any issues turning this ON?
I have inherited a database which started life under SQL 7 (where Torn page Detection was OFF by default), and I'd like to turn it on. Will this reshuffle all the pages to make room for the extra check-sum, or is that stored in a single block somewhere else such that it can easily be added?
Is the change going to block access for long? (DB = between 2~5GB)
Thanks
Kristen
we are running a maintainance plan on sql 2000 standard edition, got the error,
[2] Database db_source: Check Data Linkage...
[Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 8928: [Microsoft][ODBC SQL Server Driver][SQL Server]Object ID 1221579390, index ID 0: Page (1:197116) could not be processed. See other errors for details.
[Microsoft][ODBC SQL Server Driver][SQL Server]Table error: Object ID 1221579390, index ID 0, page (1:197116).
Test (IS_ON (BUF_IOERR, bp->bstat) &&bp->berrcode) failed. Values are 2057 and -1.
[Microsoft][ODBC SQL Server Driver][SQL Server]CHECKDB found 0 allocation errors and 2 consistency errors in table 'xxx'(object ID 1221579390).
[Microsoft][ODBC SQL Server Driver][SQL Server]CHECKDB found 0 allocation errors and 2 consistency errors in database 'db_source'.
[Microsoft][ODBC SQL Server Driver][SQL Server]repair_allow_data_loss is the minimum repair level for the errors found by DBCC CHECKDB (db_source noindex).
when i run query on anlyzer select * from xxx, i got the error
Server: Msg 823, Level 24, State 2, Line 1
I/O error (torn page) detected during read at offset 0x000000603f8000 in file 'F:Program FilesMicrosoft SQL ServerMSSQLdatadb_Data.MDF'.
Connection Broken
please help. thanks
Hello everybody,First: SQL Server 2000 sp3a, HP cluster server, MS 2003 server,database recovery model simpleTorn page detection:When I have this option turned on, processes conected with updating andwriting in database, was MUCH more slower, than if I've this optionturned off.It seams to me, that when this option is turned on, the sqlserver ismuch more slower by any operation connected with writing, than withoutthis option.This option is required for ensurance, that the data are writtenproperly on the media.My question is:if I have my database running under cluster, with RAID hd system, whichcontains write cache, with additional checking, that the data will bewritten correctly, is it necessary for me to keep this option turnedon?Auto shrink:When it is turned on, does it affect performance?Personaly, I don't think so, but somebody is insysting on it, and Iwould like to have an information from independent source about that.Best regardsMatik
View 13 Replies View RelatedIf we restore a database (full backup) first and continuously apply its transnational log backups, do we end up with two identical databases at page level eventually?
If so, page level repair to principle server may work as documented. I can see SAN level mirroring will give you exactly two identical databases at page level eventually at some point of time.
I can see Sybase device (in MS word file) level mirroring will give you two identical things at page level for same device.
But applying the transcriptional logs sequentially on the other servers, can SQL Server guarantee these two databases are identical at page level given there is server configuration can be different?
Hi,
Please Help, I am very desparate for a solution to this one.
I have an error appearing
"Error 25115 Wrong Page (potential database corruption). Try Running the Repair Utility."
I have SQL Server Enterprise set up with Merge replication, it is being used to Sync with Windows Mobile Devices as the subscribers.
All the Windows Mobile subscribers have been synchronising fine up until recently, when 1 of the Subscribing Windows Mobile devices received this error.
The day after, another device Synchronised fine the first time (note that the Synchronisation was a long one and the SDF grew in size dramatically while the synchronisation occured, but the Sync worked fine and the SDF dropped back to its initial size) The 2nd sync 5 mins later failed however so this Mobile device has the same error also.
Any suggestions as to the below are much appreciated
a) Why this error occurs?
b)How do you resolve this error?
c)What is the Repair utility mentioned in the error, and is it of use to me?
Thanks in advance, I am very greatful for any advice.
Hi there.
I have a corrupt .sdf database sat on a SD Card but i am unable to find a way to repair it.
So far I have tried a few different methods, most of which just tell me what i already know i.e. "the database is corrupt and needs repairing!!"
I am unable to open the file in SSMS object browser (see above message) which means i cant run repair / shrink utilites.
I am also unable to add the database to a vs2005 project (again see above message) meaning again i can't run any repair utilities.
I have also tried using the compact / Repair utility in Query analyser 3.0 on my Windows Mobile 5.0 PDA but once again i am greeted with an "error reading file - Run the Repair Utility" Message.
Lastly i've tried using the SQLCEengine.repair method and, depending on whether i do it on the PDA or on a desktop pc it throws the exceptions "Error occurred reading database file - run the repair utility"(PDA) or "invalid database type" (PC)
Can anyone shed any light as to whether there is another (easier???) way of doing this or if i just have to face it that this file is lost?
Thanks
ps. the code i used for the .repair is as below:
Dim conn As SqlCeEngine
Dim strdb As String
strdb = "SD CardPathnameDatabase.sdf"
conn = New SqlCeEngine(String.Format("Data Source={0}", strdb))
If conn.Verify = False Then
conn.Repair(Nothing, RepairOption.RecoverCorruptedRows)
MsgBox("Successfully Repaired")
End If
Does anyone have any experience detecting and repairing torn pages? Does Optimization repair Torn Pages ? Any help or resources would be much appriciated.
Late
Matt
I have created one reports but all the records are displaying on one page.find a solution to display the records page by page. I created the same report without group so the records are displaying in page by page.
View 3 Replies View RelatedHi everbody,
I ran the dbcc checkdb command .
The following errors were found:
[Microsoft][ODBC SQL Server Driver][SQL Server]Object ID 501576825, index ID 0: Page (1:894606) could not be processed. See other errors for details.
[Microsoft][ODBC SQL Server Driver][SQL Server]Table Corrupt: Object ID 501576825, index ID 0, page (1:894606), row 57. Test (!(hdr->r_tagA & (VERSION_MASK | RECTAG_RESV_A | RECTAG_RESV_B))) failed. Values are 112 and 193.
[Microsoft][ODBC SQL Server Driver][SQL Server] The repair level on the DBCC statement caused this repair to be bypassed.
[Microsoft][ODBC SQL Server Driver][SQL Server] The repair level on the DBCC statement caused this repair to be bypassed.
[Microsoft][ODBC SQL Server Driver][SQL Server]CHECKDB found 0 allocation errors and 2 consistency errors in table 'MsgDateDetail' (object ID 501576825).
[Microsoft][ODBC SQL Server Driver][SQL Server]CHECKDB found 0 allocation errors and 2 consistency errors in database 'Test'.
[Microsoft][ODBC SQL Server Driver][SQL Server]repair_allow_data_loss is the minimum repair level for the errors found by DBCC CHECKDB (Test repair_fast).
[Microsoft][ODBC SQL Server Driver][SQL Server]DBCC execution completed. If DBCC printed error messages, contact your system administrator.
** Execution Time: 3 hrs, 10 mins, 30 secs **
How can i fix these errors.This is production server. This error reported last saturday. I don't have old backup also. everday overwriting the backup.
Please any body help me.
I started getting errors everytime i try to access my webmail(horde), my zencart and my forum so i asked my website host and they say i need to repair the SQL database. I have no idea what this means, can someone help please?
The errors are:
Horde: A fatal error has occurred
Could not connect to database for SQL SessionHandler.
Details have been logged for the administrator.
Zencart: 0 DB_ERROR_NOT_CONNECTED
in:
[db_cache table]
If you were entering information, press the BACK button in your browser and re-check the information you had entered to be sure you left no blank fields.
SMF Forum: Connection Problems
Sorry, SMF was unable to connect to the database. This may be caused by the server being busy. Please try again later.
Please help, i am totally lost!
Hi,I just deleted about 1 million records from a SQL Server 2000 database. Iaccess it using Access 2000.I have Compact and Repair available in the adp under Tools. Should I do thatfrom Access? Will it not mess anything up?Thanks!J~
View 2 Replies View RelatedI am backing up SQL 6.5 DB using Backup Exec 7.2 on NT 4.0 server SP4 with SQL server agent. The backup job ends in Failed status and a warning that DBname is corrupt. I then try to run DBCC Checkdb, newalloc, and checkcatalog commands to repair the DB. No further ahead yet. Are there any other commands that I can perform on the DB so that the corruption can be repaired, or verified there indeed is corruption of DB?
View 1 Replies View RelatedI'm an Access man moving towards SQL Server and I'm interested in knowing if there is a utility for my SQL Server version 7 database that is similar to Access' Compact and Repair utility? I'd like a recommendation from a guru on what Prevenatative Maintenance measures I should be running daily/weekly/monthly etc...
Thanks in advance.
dog
I want to use function "Compact and repair database" in SQL Server2000 which like function Access 2003.
How can i do ?
Thank you very much.
I have schedule DTS to import every day few tables. It had been workinggreat and had no problem. All of a sudden I started getting this error.ERROR AT DESTINATION FOR ROW NUMBER 100. ERROR ENCOUNTERED SO FAR IN THETASK. 1 UNIDENTIFIED ERROR.Thanks.
View 2 Replies View RelatedHi All
I am looking for repair tools for corrupted mdf and ldf files,
( These files beeing corrupted after i restore them using Easy Recovery Profissional after formatting c drive by mistake. )
Remark : one file of my 3 databases work perfectly when i use attach database.
Any Help will Be appreciated.
thanks
Running SQL 7, Standard version. I had a database marked 'suspect'. I copied the MDF and LDF files to another directory, then deleted the suspect database. I tried to create a new database and attach the MDF file to it. It did not work. Any other ideas? I have no other backups of the data. I am willing to pay for consulting over the phone if necessary.
View 1 Replies View RelatedHow can I repair the database (5 gb) and remove the transaction log (45 gb). Whenever I run the maintanence wizard, it corrupts the db and I have to restore the db. Whenever I try to shrink the transaction log, the query runs but it doesn't shrink it at all. Is there a manual method for either of these and if so, how?
View 1 Replies View Relateda sql server database always contains two file.*.ldf *.mdf
When *.ldf was deleted the database may suspend.we can repair such database through about 20 steps.
if you want repair your database .please contact me with email:cn9526@163.net or msn/email :paulyang8848@hotmail.com
you can also see our homepage http://www.haou.net/sqlother/
the service price is begin at 200 US DOLLOR.
Hi There
This is on Sql Server 2000, SP3.
When i run DBCC CHECKDB i get the following errors:
============================================================================================
Server: Msg 8928, Level 16, State 1, Line 1
Object ID 2, index ID 255: Page (1:76914) could not be processed. See other errors for details.
Server: Msg 8939, Level 16, State 1, Line 1
Table error: Object ID 2, index ID 255, page (1:76914). Test (IS_ON (BUF_IOERR, bp->bstat) && bp->berrcode) failed. Values are 2057 and -1.
CHECKDB found 0 allocation errors and 2 consistency errors in table 'sysindexes' (object ID 2).
CHECKDB found 0 allocation errors and 2 consistency errors in database 'OLTP3PRO'.
repair_allow_data_loss is the minimum repair level for the errors found by DBCC CHECKDB (OLTP3PRO ).
============================================================================================
The database is not suspect and everything seems to be working fine, so after hours i run the follwing:
DBCC CHECKDB('OLTP3PRO', REPAIR_ALLOW_DATA_LOSS)
But i get the same errors?
Server: Msg 8928, Level 16, State 1, Line 1
Object ID 2, index ID 255: Page (1:76914) could not be processed. See other errors for details.
Server: Msg 8939, Level 16, State 1, Line 1
Table error: Object ID 2, index ID 255, page (1:76914). Test (IS_ON (BUF_IOERR, bp->bstat) && bp->berrcode) failed. Values are 2057 and -1.
Table error, The text, ntext or image node at page (1:76914), slot 0, text ID 2129023023802 is referenced by page (1:3859) but was not seen in the scan.
The repair level on the DBCC statement caused this repair to be bypassed.
CHECKDB found 4 found 4 consistancy errors.
So it seems CHECKDB with repair does not help ? How do i fix this ?
Thanx
Hi,
Some part of my system registry seens corrupted, and I can not run the report services configuration tool, it gave me the following error:
0x80010002: RCP_E_CALL_CANCELED
1) Does a repair of the installation will register back the COM Servers?
2) After a repair does the report services encription key will be affected.
My main problem is to perform a backup of the report services encription key on a server that is not very stable.
3) Is there another way to backup the encription key without using the report services configuration tool?
Thanks
JF