Hi, below is the query that i use.
update user set user_description=' "+ userDesc +" ' where user_id = 1;
userDesc is the value taken from a textbox and is supposed to be used with the update query.
userDesc = "kad'nsad'kasnd'nak";
The quotes in userDesc is affecting the update. Is there anyway to replace quotes with ' using stringbuilder?
I had a procdure in SQL 7.0 in which I am using both single quote and double quotes for string values. This proceudreused to work fine in SQL 7.0 but when I upgraded SQL 7.0 to SQL 2000, this proceudre stopped working. When I changed the double quotes to single quotes, it worked fine.
Any Idea why ??
Thanks
Manish
below is the code of my sp
it's giving my wrong result: 1 instead 0 and vice versa
could you please check what's wrong with it: i think there is something related to @var2 in the code colored in orange.
Thanks!
Code:
ALTER PROCEDURE sp_name
(
@param1 int = NULL,
@param2 int = NULL,
@Result int OUTPUT
)
AS
DECLARE @var1 AS varchar(255)
DECLARE @var2 AS varchar(255)
DECLARE @x AS varchar(1000)
IF @param1 IS NOT NULL
BEGIN
SET @var1 = (
SELECT t1col1
FROM tabl1
WHERE t1col2 = @param1)
SET @var2 = ''
DECLARE crsr CURSOR FOR
SELECT t2col1 FROM tabl2 WHERE t2col2 = @var1
OPEN crsr
FETCH NEXT FROM crsr INTO @x
WHILE @@FETCH_STATUS = 0
BEGIN
SET @var2 = @var2 + '''' + @x + '''' + ', '
FETCH NEXT FROM crsr INTO @x
END
CLOSE crsr
DEALLOCATE crsr
SET @var2 = SUBSTRING(@var2, 1, LEN(@var2) - 1)
END
ELSE
BEGIN
SET @var2 = (SELECT t2col1 FROM t2 WHERE tb2col3 = @param2)
SET @var2 = '''' + @var2 + ''''
END
PRINT @var2
IF EXISTS (SELECT * FROM tabl3 WHERE t3col1 IN (@var2))
OR
EXISTS (SELECT * FROM tabl4 WHERE t4col1 IN (@var2))
BEGIN
SET @Result = 1
END
ELSE
BEGIN
SET @Result = 0
END
Hi all,
How do you put quotes in quotes so it looks like this below?
exec('select IDENT_CURRENT('table')')
Not
exec('select IDENT_CURRENT('table')')
I just don't want the middle quotes to end the initial quote..
thanks in advance..
Hi,
Your help would be appreciated if you could give me some idea about why SQL 2000 takes single quote(') as a default for string searching instead of double quotes("). I have couple of stored procedures which were developed with string comparison with double quotes in SQL 6.5. If any one knows how I can change default as a double quotes(") instead of single quote(') in SQL 2000, would be great. Thanks
This is the sql statement I have:
Code:
select * from tblCalls where TNum = [NUMBER] and Street like '[TEXT]'
The problem is that the Street field contains street names with quotes (ex. DE L'ACADIE). When I run this query using this street name, it doesn't work because of the ' between the L and the A. How can I tell SQL to "ignore" the ' in the text?
Hi,
I am creating a flat file connection to a .csv file
In the columns section of the flatt file connection manager editor, I am not sure why the texts in the .csv file are shown with double quotes arouond them.
They do not have "" in the .csv file.
Thanks
Has previous work been done on this? Is their a library one can download? Here's the problem. In an aricle a person or author may make a statement about a subject or a person. I am making a database on this.
For example, here in Israel, PM Olmert may make a statement on the teacher's strike or on Abu Mazen. The article may say, speaking of Mazen, Olmert said such and such. PM Olmert said, "xxxxxxx......." with the previous material making it clear whathe was speaking of.
Right now I have ugly code. Is there a neat way of doing this?
If this is the wrong forum, can somebody direct me to the right forum?
Thanks.
Dennist
Help, please.
I'm going crazy trying to figure out how to form this SQL query. I am querying an Informix linked server and I need to pass a variable date. I am using an expression to create the query like so
"Select count(*) from " + @[User::varDBName] + ":informix.doc_tl WHERE " + @[User::varDBName] +":informix.doc_tl.d_received = {D " + @[User::varDate] +"} "
The informix query needs the date to be {D "2007-01-15"} but for the life of me, I can't get the date enclosed in quotes.
The error I get is
An OLE DB record is available. Source: "(null)". HResult: 0x80040E14
Description: "(null)"
Can anyone tell me what I'm doing wrong?
Thanks
Hi, I'm trying to conver an Access database to SQL 7, but I can't find a easy way to replicate the aggregate function FIRST in SQL, can anyone give me some advise on how to "fake" the FIRST agg function in SQL7? Thanks
View 1 Replies View RelatedI am incorporating a perl script loading data into my SQL Server. If I receive a message with a single backslash I know to replace it with a double backslash \. But what if it is a " double quote what do I need to do to get it to appear as is?
Thanks
I want to replace the value in a column with the content from listbox.
I have wrote the code like,
Dim i as Integer
dim sql as string
For i = 0 to Customerslist1.ListCount-1
sql = "UPDATE master (gstl) VALUES(" +chrb(34)+Customerslist1.Cell(i,8)+chrb(34)+")"
app.Gudangstock.SQLExecute(sql)
app.Gudangstock.commit
next
msgbox"insert ok"
UpdateCustomerList1
but no error found and the sql command is not executing.
Nevil Mascarenhas writes "Hi SQL team,
I am just a beginer in SQL
Here is sample output of a SQL query
Alarm No Site Name Startdate Starttime
7767 ABC 20-08-05 00:00
7765 XYZ 20-08-05 00:00
7762 ASD
5453 QWE 22-08-05 01:00
In this above example, I would like to replace blank fields in Startdate and Starttime coloumn with XXX
Output required is
Alarm No Site Name Startdate Starttime
7767 ABC 20-08-05 00:00
7765 XYZ 20-08-05 00:00
7762 ASD XXX XXX
5453 QWE 22-08-05 01:00
Can you please guide me."
Hi i have 2 cols
col1 col2
A1 21
A2 22
A3 21
A4 23
I want to create a report such that i should see all values of col1 but in col2 i want to show only value of 21 and the remaining should be zero.
So basically all the other values except 21 should be zero in the report but should not be updated in the database.
So the report should look like
col1 col2
A1 21
A2 0
A3 21
A4 0
can you please tell me how to do that
Thanks
vic
Vicky
Hi,Is it possible to do from one script? We have a set of user's tables like"tbl%". We can get this list very easy using this script:SELECT name FROM sysobjects WHERE xtype = 'U' AND name LIKE 'tbl%' ORDER BYname;We need to change some column names if these names are in a special listthat we have. What can we do? Use FOR EACH ROW? Or what?So, I need to get a column list for each table and check if every columnname is equal to one of the names from the list and then if YES replace itby something or add some symbol to this name. Terrible or possible?Regards,Dmitri
View 4 Replies View RelatedHi
I have a table with column type as ntext. I need to modify the column value. I wanted to replace a given characterstring with another one in this column. Any assistance on this is highly appreciated.
Thanks!
Santhosh
Hi all,
We are trying to migrate a SQL Server 2005 database/schema onto SQL CE. The original SQL Server 2005 schema uses views. And VIEWs are not supported on SQL CE. What can we use as an alternative?
Here are the option I can think of:
Use Tables instead of views : We are currently using this approach. But the disadvantage is that data remains on the DB. We need to clean and reuse the table everytimeCan we use a DataSet or DataTable instead? Any sample code available?
Can we replace them by some in-memory data structure?
Hi all
I need to remove all the ' in a table and i am having some problems with the script, any help would be great
Thanks
Richard
Hi,
I would like to replace all instances of a code that starts with 'GEM' with the word 'Perfect'', and all instances of the code that starts with 'GOLD' replaced with 'Imperfect'.
For example, if I have a table named STONES, and a field within the table STONES.Code contained codes such as 'GEMPART4000', 'GEMPART5000', 'GOLDSIDE2300' and 'GOLDSIDE3000', I want to return the first two codes as the words 'Perfect' for each and the last two codes with the word 'Imperfect' for each.
Similarly, how would it be written so I could select a middle part of the code to use as the trigger to replace the code with something different, e.g. if I wanted to use the 'PART' from the first two codes?
I have discovered that the REPLACE and CASE functions don't work with % (so I am looking for any code that starts with what I stipulate but can end with anything (or using it on either side of the middle part of the code)).
Any help would really be appreciated please.
Hi Guys,
I am faced with a problem that is giving me headaches. I have t1, t2 and t3. I t1 I have students that have a reference to t2 which are the schools they belong to. The problem arises when I see that there is redundancy in t2. There more records for the same schools. This was posible in giving the same school (postcode and name make it the same school) a different ID. In t3 I removed these redundant schools by using fuzzy grouping.
My problem is I want to ensure that the students are put using the schools from t3 instead of t2. So what I need to do is is to replace the redundant id from t2 with the correct id from t3.
Please help. Thans in advance
I was having some issues with converting this @BeginDate(which is passed in as a datetime) correctly and someone suggested the syntax below. It enloses it in triple single quotes. That seemed to work, but it also seems to work with single quotes too. Can someone explain the use of triple single quotes in stored procedures?
''' + CAST(@BeginDate as Varchar(30)) + '''
Help please! I have a problem with passing quotes in a parameter. I am using asp.net (vb) passing a parameter to a stored procedure.
Here is an example of the parameter I am passing from the asp page.
strIndexFilesFound = " 'file1.pdf', 'file2.pdf' "
.......Parameters("@IndexFilesFound").Value = strIndexFilesFound
And the Procedure parts
...
@IndexFilesFound char(100) = ''
....
WHERE IndexFile IN(@IndexFilesFound)
The result should be that the where query receives the data like this.
WHERE IndexFile IN ('file1.pdf', 'file2.pdf')
The number of files passed is unknown for any given query.
Much Thanks!
I have 2 SQL 6.5 databases on separate servers. Server A replicates a text field into a table on server B.
On server A the field contains text similar to THIS IS FRED'S HOUSE. After replication to Server B it looks like THIS IS FRED''S HOUSE. The distribution database also has it as THIS IS FRED''S HOUSE. Using ODBC trace I cannot see the value being passed in the text field as it is displayed as a question mark e.g. ?.
How do I fix the problem ?
Thanks
Hello all,
I am using SQL Server 6.5 SP5a.
I have to use bcp to import two text files everyday for database update. The problem is that some of the character fields that are being imported have double-quotes and/or commas in them. When these are imported into the SQL Server tables additional double quotes are being added into these strings.
Example:
INCOMING STRING = a"a
IMPORTED STRING = "a""a"
INCOMING STRING = b,b
IMPORTED STRING = "b,b"
I have searched through BOL and have not been able to find any information.
Does anyone know what is causing this and if so how to correct it?
Thanks,
Bryan Ziel
I`m new to sql and am having trouble with updates. I`m trying to make a web page where people can enter text and have it submitted to the database. The problem is that I need to let people submit text with quotes (single and double). When my cgi generates the sql, the quotes cause problems with the dbms (ie. in the statement:
UPDATE mytable SET thetext = `This is Joe`s text.` WHERE user = `joe`
the apostraphy in "joe`s" is interpreted as meaning the end of the string to enter into "thetext" ). I expect that there`s some escape character that I don`t know about? I know this is a very basic question, but any help would be greatly appreciated.
-Daren
if l have a field conating data that has quoutes around it like field idno "2809085009084 ". How would l remove the quotes ????
View 1 Replies View RelatedHi,
I need to have an varchar value with single quotes. For eg: the below code throws compilation error.
Declare @val VARCHAR(20)
SELECT @val = ''+name+''
print @val
Error: Invalid column 'name'
I want to print name enclosed with single quotes. Please guide me.
Regards,
Sam
I have a CSV with some columns containing quoted text with the text itself containing quotes.
I'm trying to use a Flat File Source in SSIS. I've set a double quote as the text qualifier (") and comma as the delimiter. The trouble I'm having is getting to text that contains a double quote like in the following example;
123,"xyz","Don't you hate when MS say's it's a "feature" and not a bug","more data"
SSIS is seeing the first quote as a text qualifier and the second quote as the end of the text. Because the next delimiter is not found (in this case a comma), it returns;
[staging_output [4195]] Error: The column delimiter for column "Column 3" was not found.
How I can get SSIS to treat the whole column as a single piece of text that just happens to contain quotes?
Hello Everyone!
I am having a problem with updating a password within a table. Below is the old and new password that needs to be updated.
Old2"3("-"3#@(%P="''_DD@D*
New :"I+)#]*1#E,%R-''7^,TEA$X&^O_-68DIK,@
Below is the query that I am trying to run. I believe my problem is becuase of the Single Quotes found within both the old and new password.
I have tried to escape the single quotes, @local_variable, CHAR(39) and other ways of playing with the string. I cannot seem to find a solution.
If you were to ignore the update statement, the SELECT statement would return no results even though the PRINT statement displays the required data.
This is what baffles me and why I cannot run the UPDATE statement, becuase of course, nothing would be updated since no results were returned.
Can anyone offer their assistance?
Thank you in advance.
__________________________________________________ _______________
DECLARE
@OLD_PASSWORD VARCHAR(50),
@NEW_PASSWORD VARCHAR(50)
-- 2"3("-"3#@(%P="''_DD@D* ///// The old password.
SET @OLD_PASSWORD = '2"3("-"3#@(%P="' + CHAR(39) + CHAR(39) + '_DD@D*'
-- :"I+)#]*1#E,%R-''7^,TEA$X&^O_-68DIK,@ ///// The new password.
SET @NEW_PASSWORD = ':"I+)#]*1#E,%R-' + CHAR(39) + CHAR(39) + '7^,TEA$X&^O_-68DIK,@'
PRINT @OLD_PASSWORD
PRINT @NEW_PASSWORD
SELECT *
FROM Credentials
WHERE
Is_Active = 1 AND
[Password] = @OLD_PASSWORD
/* Attempt to update the password table. */
UPDATE Credentials
SET [Password] = @NEW_PASSWORD
WHERE [ID] IN
(SELECT [ID]
FROM Credentials
WHERE
Is_Active = 1 AND
[Password] = @OLD_PASSWORD )
This is what the crystal reports makes, when you enter the tables and link. I also have some sql that i pasted there without the quotes. THey both run. Only isssue I have is that my sql which is a view does not update on demand from the server. IOW, they enter a new row. and it's not immediatlyin the crystal report. I asked the user if he can logout and back in and he says that he doesn't have to do that with other crystal reports.
SELECT "OEIND94"."IDDOCD" AS INV_DATE,
"OEIND94"."IDORD#" AS ORD_NUM,
"OEIND94"."IDORDT" AS ORD_TYPE,
"OEIND94"."IDPRLC" AS PROD_FAMILY,
"OEIND94"."IDPR$C" AS PRICE_CODE,
"OEIND94"."IDCOM#",
I have to insert "" in data and in column name in the output .csv file.I tried using Quotename function
for ex : QUOTENAME(policy.policyid, '"')AS PolicyID
Result
Policyid
"12135"
"34334"
"56765"
But i need policyId(i.e columnname) uswell in ""
Result
"PolicyId"
"12135"
"34334"
"56765"
How to amend the query.
Hi,It seems to be simple, however, it stumbles me.how to replace all the double quotes (") within the followingsentence (or a column) with single quotes ('),colA = this is a freaking "silly" thing to dointocolA this is a freaking 'silly' thing to doSelect Replace(colA,'"',''')[color=blue]>From tblXYZ[/color]won't work,Select Replace(colA,'"',"'")[color=blue]>From tblXYZ[/color]won't work neither.How come? Thanks.
View 4 Replies View RelatedI have been searching for an escape character or a way of escapingdouble quotes that are actually in a string that I am using in thecontains predicate.Here is an exampleselect *from tablewhere contains(field, '"he said "what is wrong", that is what hesaid"')I need the double quotes in the string because they are part of thetext. Of course, Fulltext search raises the errorServer: Msg 7631, Level 15, State 1, Line 1Syntax error occurred near 'what is wrong", that is what he said'.Expected ''''' in search condition '"he said "what is wrong", that iswhat he said"'.If I remove the double quotes, the search does not return the properresults.Thanks in advance for the helpBill
View 2 Replies View Related