Report Formatting
Nov 21, 2007
Hi,
I have to generate a report in this format
-----------------------------------------------------------------------------
Id NO date1 date2 date3 date4 defination
-----------------------------------------------------------------------------
1 xxx xxx xxx xxx ABC
2 xx yy yy LMN
3 22 33 xxx fff HIF
3 22 33 xxx fff TEST
3 22 33 xxx fff BEST
3 22 33 xxx fff TRUST
The problem is for the field Id No where
the fields---------------- Id No, date1 ,date2,date3,date4 are same and only defination is differrent
they do not want me
to repeat the same data but shown it once and display all the different defination like below
-----------------------------------------------------------------------------
Id NO date1 date2 date3 date4 defination
-----------------------------------------------------------------------------
1 xxx xxx xxx xxx ABC
2 xx yy yy LMN
3 22 33 xxx fff HIF
TEST
BEST
TRUST
I tried doing grouping by IdNO and show defination in seperate detail line,it gives
the field defination in the next line like below, which the end users dont want
Id NO date1 date2 date3 date4 defination
-----------------------------------------------------------------------------
1 xxx xxx xxx xxx
ABC
2 xx yy yy
LMN
3 22 33 xxx fff
HIF
TEST
BEST
TRUST
Is there any other solution??
Thanks
View 1 Replies
ADVERTISEMENT
Oct 11, 2007
How can you I format the top portion of the report? In other words: I have a report with two parameters: dropdown Test, and a text box Test 2. Everything works fine but I want the dropdown to be in a line then the text box in another line. I can€™t find away to format this automatically generated section?
Thank you
View 2 Replies
View Related
Sep 28, 2007
I created a report using SQL Report Server project. I was able to retrieve my data without any problem. I am having a hard time to format the data correctly: when somebody access the report he will have the option to export it to PDF file
Here is how I would like to format the PDF File:
Test (title)
Department : A Mike Jebson
St Address State City
14111 NC Test
12541 NC Test2
Page 1
For the second user I will have all the above template to be Repeated again
------------------------------------------------------------------------------------------------------------
Test (title)
Department : B George Jebson
St Address State City
14111 NC Test
12541 NC Test2
Page 2
I could not make it to copy the title in the second page. This is what I have so far
------------------------------------------------------------------------------------------------------------
Test
Mike Jebson
St Address State City
14111 NC Test
12541 NC Test2
Department : A George Jebson
14111 NC Test
12541 NC Test2
Department : B Steve J
14111 NC Test
12541 NC Test2
I want the whole template to be repeated for each user. I do group by name but still I can€™t repeat title and the lines for each page. It will put everything under one title. Is there a design screen for pdf? Or i just need to do everything in the layout tab for the report then expor it as a PDF?
View 13 Replies
View Related
Jun 7, 2001
I have a problem.... I have a TSQL procedure that calculates employee overtime based upon days 1-5 of week being "in-week", and days 6-7 oweek being week-end overtime. The resulting data is then mailed to dept managers. My problem: for some reason the calculated colums are being generated at a width of 40 char per column. I somehow need to reduce the width to 8-10 characters per colum (this will eliminate the wraping that I currently get in my e-mails)... Any help would be appreciated... Thanks..Tom
View 1 Replies
View Related
Apr 16, 2008
I have a report with two datasets(and two tables). They both have a field in common(a customer code).
I want the results to be one customer per page.
This isn't a problem when using one dataset, because I can just group by customer_code and page break at the end.
But in this case I need the customer info from the second dataset to be on the same page as the customer info from the first set.
Does anyone have any formatting tips on this?
View 4 Replies
View Related
Mar 9, 2007
We have developed client SQL Server Reporting Services reports (rdlc) that are completely dynamic.
Everything on the report itself is build from code.
There are a few problems in the formatting of these reports that we have not been able to correct.
1) Because of the way the data has to be displayed. we have had to use a List control with Textboxes and Lines within to give the appearance of a table.(Column headers are textboxes with background set to gray). Line controls exist between each column of data. We did this because we need to have nested lists in some cases to display the data.
The height of the listbox is adjusted to fit the contents within. The vertical lines between the columns appear broken with gaps between each item.
Is there any way to set the line height to automatically fit the height of the ListBox.
2) Another issue we have is with Texboxes. If there is no value in the Textbox, the borders do not show. CanShrink is set to false. Hidden is false. Is there any other setting or something else that could be causing this?
View 1 Replies
View Related
Feb 2, 2007
Hi all!
I would like to know if Conditional Formatting in Report Builder is supported in Service Pack 2 CTP.
Thanks for your time.
View 3 Replies
View Related
Oct 30, 2007
Hi,
Using SQL 2005 Reporting Services, with the click of one button in my custom report viewer, is there a way I can generate my report, format it into PDF and send it to an email address that is shown on the report itself. (Report run may generate 1 copy specific to each client...ie, I want one copy to email to each client, and not have to have the clients subscribe to the report).
Any idea?
Cheers
Jason
View 3 Replies
View Related
Jan 11, 2007
Hi all
I need Report Builder to format Certain Numbers
as Currency by default. According to the documentation
I need to set the culture setting in the report's datasource.
I'm using a SSAS2005 Cube
The Report Manager then let's me create the Model wich is used
by Report Builder.
My Question is: Where do I set the culture setting?
I cannot find it in the Cube and viewing the model's xml hasn't helped.
Any help will be dearly appreciated
G
View 8 Replies
View Related
Feb 22, 2007
I cannot find anything that would suggest it is possible to use a cascading style sheet when formatting data elements within a local report (RDLC). We created an HTML report using CSS and now want to generate the same report using the Report Viewer control along with our defined styles.
Any ideas?
thank you
View 1 Replies
View Related
Mar 5, 2007
This is a good one:
Same RDL, 2 different servers. I run the report on my computer and export to PDF, it prints properly. When the customer runs the report on their server (SSRS 2K5 SP1, same as mine), they get it displayed differently. The columns on the report extend to the next page and the lines are thicker.
Is this a formatting issue on the customer's PC? It uses standard fonts (Tahoma, Sans-serif).
Any ideas?
View 3 Replies
View Related
Dec 18, 2007
I have a "report" that is more like a form with a great many fields on it that are not arranged like columns. The data is displayed in text boxes. My problem is that the "fields" or text boxes do not always form a nice single line where they connect - at least in the displayed format (HTML4.0), but actually do in printed format. It looks like the fields/textboxes may have a varying width, and possibly height.
Is there any way to make sure that the width and height are static?
Thanks,
Menno Homburg
View 1 Replies
View Related
Jul 30, 2007
I am currently developing a report for users who insist on exporting to Excel 2007. When I export to Excel on my PC, the report formatting is fine (I am using Excel 2003), however, font sizing as applied in the report is lost when exported to Excel 2007 (i.e. font size 9 in the report is actually 10 in excel 2007). In Excel 2007, the data which runs onto two lines does not show up correctly - the second line is squashed below the first.
Any ideas on how I could resolve this?
View 1 Replies
View Related
Mar 25, 2008
There is no conditional color formatting for Report Builder.
Is there any way to have it - write plug-in for example.
I tried to "hack" rdl file the RB produces:
but it didn't work.
Also, I hear that Microsof is about to issue a fix for it (SSRS 2005). Is it true?
Thank you
View 3 Replies
View Related
Apr 28, 2008
Env: Microsoft SQL Server Reporting Services Version 8.00.1042.00,
<OSName>Microsoft Windows NT 5.2.3790.0</OSName>
<OSVersion>5.2.3790.0</OSVersion>
Last week a number of reports that were working fine began rendering incorrectly when sent out in report subscription emails - they work fine when directly rendered using report manager. The weird issues include broken alignment (left instead of right), missing borders, and changed fonts.
I checked the report deployment dates and these reports have not changed since well before the issues arose. I am digging thru the event logs to see what might have changed, but has anyone seen this issue before?
TIA,
-Peter
View 5 Replies
View Related
May 1, 2007
We have multiline text box of datatype ntext, and users will use tabs to format the data for better readability.
How can we keep this formatting in SSRS 2000? Right now, it simply goes away and resembles nothing like the application.
Thanks!
View 1 Replies
View Related
Oct 16, 2007
I have a report that has ten pages (essentially ten different reports). Each page has one, large main chart and then three smaller charts stacked on top of each other off to the right. The layout is in landscape. When I render the report in Reporting Services, the layout looks fine. If I export it to Adobe, it is also fine. However, when the report is emailed as a PDF attachment, the main chart on each page is completely missing. Has anybody experienced something simliar? I was having issues with the layout, and decreasing the height of each page fixed everything, but created this new problem. I am using Adobe 7.0. Thank you.
View 1 Replies
View Related
Jul 18, 2007
I'm looking for a new way to publish reports based on OLAP data and was very disappointed to find that Reporting Services does not natively support displaying MDX query results in a matrix. While it is possible to assign an MDX query to the matrix control in Reporting Services, the two main problems are that the columns of the query must be measures (not dimensions), and it does not support display of server based formatting (fore color, back color, and font flags).
Does anyone know of any custom control that properly deals with Analysis Services data?
Thanks for any info you have!
View 13 Replies
View Related
Jun 16, 2006
SQL server 2005 express reporting problem.
error message:
This feature "remote access to report data sources and/or the report server database" is not supported in this edition of reporting service
I got this error message when I try to connect to database hosted in another PC running SQL server 2000.
Is it true that SQlL server Express can only use Local Database Engine to host the database?
View 5 Replies
View Related
Aug 18, 2005
Hello all,I have a strange problem that i need some advice on. I have the following field called FILENO. It is a SQL 2000 field with the Data Type set to Char (7). The following sql statement works perfectly:SELECT TOP 1 RTRIM(FILENO) AS TEST, RIGHT(DATEPART(Yy, FILENOYEAR), 2) AS YEAR FROM tblRecordsWHERE RIGHT(DATEPART(Yy, FILENOYEAR), 2) = '05'ORDER BY FILENO DESCIt returns the correct data, 0050. Now, what i'm trying to do is add 1 to the value so i can get the next available number which is 0051. But, when i run the following sql statement, i get 51 instead of 0051.SELECT TOP 1 RTRIM(FILENO+1) AS TEST, RIGHT(DATEPART(Yy, FILENOYEAR), 2) AS YEAR FROM tblRecordsWHERE RIGHT(DATEPART(Yy, FILENOYEAR), 2) = '05'ORDER BY FILENO DESCDoes anyone have an idea how to solve this? Thanks.Richard M.
View 1 Replies
View Related
Feb 28, 2001
I'm working as a consultant for a project and I have been having constant issues with the in house "database guru" about stored procedure formating.
He insists I use a format similar to this:
create procedure getUser @UserId int = NULL
as
select
UserName
, UserPassword
, UserRole
from
Users
join
UserRole
on
User.ID = UserRole.ID
where
User.ID = @UserID
and
User.Active = 1
where as I prefer this format:
create procedure getUser
(
@UserId int = NULL
)
as
select UserName,
UserPassword,
UserRole
from Users
join UserRole on User.ID = UserRole.ID
where User.ID = @UserID
and User.Active = 1
Now normally I don't argue about style issues but I find his format confusing and it bothers me that it senselesly wastes lines make the stored procedure longer than necessary.
I'd love to get some comments on this issue or reference to any discussions on issues such as this.
Thanks
View 2 Replies
View Related
Apr 9, 2008
Hello -
Does anyone know why SQL Server Reporting Services formatts SQL weird? -- If I type a SQL statement in notepad or notepad++ and then paste it in Reporting Services it will change the whole structure and "expand" it out to three or four times its size.
Thanks
Adam
View 3 Replies
View Related
Dec 12, 2006
Hello All,
Is it possible to format an integer to a float value with 2 decimals in an sql query.
If yes, Please help?
View 2 Replies
View Related
Jan 24, 2007
I need to show my SUM of the 2 columns added in the query below formatted as currency. Is this possible?
SELECT SUM(QVSTDN + QVNONC) AS Total FROM INVOICE_TBL WHERE QVORDN = @QVORDN AND QVINV = @QVINV
I tried:
SELECT CONVERT(varchar(12), SUM(QVSTDN + QVNONC) , 1) AS Total FROM INVOICE_TBL WHERE QVORDN = @QVORDN AND QVINV = @QVINV
But this does not format it as currency. Any input would be helpful.
View 6 Replies
View Related
Apr 25, 2007
I imported data from a text file, where dates are currently in the format: 050729 to represent July 29, 2005.
How could I write a sql statment to put make this show up as 07/29/05?
Thanks
View 5 Replies
View Related
Jan 31, 2008
I am trying to output data from SQL Server to an email body message with a little formatting (just to make it legible)
Using this SQL statement:
select top 1 'Name', app_first_name+' '+app_last_name [name] ,'Submission Date', submission_date ,'Address', app_address+', '+app_city+', '+app_state+' '+app_zip from vw_bpa_export where app_email = dave@email.com order by submission_date desc
the resulting output displays this in the email body
"Name","Brian Vogler","Submission Date","2008-01-30 07:45:00","Address","6285 Harrow Trace, Norcross, GA 30092 "
but what I want is the text to look more like this:
Name Brian VoglerSubmission Date 2008-01-30 07:45:00Address 6285 Harrow Trace, Norcross, GA 30092
Is there a way to do this in the SQL statement (without HTML tags)?
View 3 Replies
View Related
Jun 9, 2008
In a SQLDataSource, the following line throws an error as an undefined function. FilterExpression='left$(lname,1) = "D"'
Isn't this a standard VB function and why does it produce an error. How do I fix?
Thanks
View 2 Replies
View Related
Dec 13, 2000
Hi,
In MS Access I can do the following:
Format([SW_Dttm],"Short Date")
What is the equivalent in SQL Server?
Thanks,
Bill
View 1 Replies
View Related
Jun 19, 2000
I have values in my database that I'd like to display as $xxx,xxx.xx. Some of these values use the money datatype and others use float.
I'm building a string in a stored procedure that is eventually passed to Visual Basic. I want to format these values in the above format in the string that is passed. I've searched all through MSN and I couldn't find anything related to VB's FORMAT function in SQL Server.
Does Transact-SQL have any functions that could format these values for me?
View 1 Replies
View Related
Mar 13, 2001
Does anyone familiar with a tool or a quick way to put apostrophes and commas around some values, so they could be used in a query ? Example, if I have a bunch of zip codes such as:
10001
10003
10009
54321
89043
etc
Let's say I have a couple of hundreds of them. I need to be able to see them as -
'10001','10003','10009','54321','89043' etc
Appreciate very much your time.
Ivan
View 3 Replies
View Related
Feb 1, 1999
I am trying to run a query for the company that I work for and I am getting the right data but more than needed. the query is like this
select distinct(companyname),max(calldate) from tablename
what I want to see is the latest call made to a customer for each company
but what I get back is the company listed several times with the dates of each call. I only want the latest. Any help?
View 1 Replies
View Related
Apr 12, 1999
Hello Everyone,
I have been requested to take a number of columns and concatenate them into one column with a specifc format/layout. For example I need to take this, (noting all columns are of different datatypes:
col_1 col_2 col_3 col_4 col_5 col_6 col_7
PK #1 John Doe 123 Elm Street Anywhere NM 55660
#2
#3
etc..
...and create this on a different table (noting col_2 is of datatype "text":
col_1 col_2
PK #1 John Doe
123 Elm Street
Anywhere NM 55660
#2
#3
etc..
Can this type of formatting be done?
I know how to concatenate data and use the convert function, but how do you add in CR-LF to get the proper formatting??
Any help would be greatly appreciated.
Troy
View 1 Replies
View Related
Jun 12, 2001
Requirement:
On Insert, Trigger xp_sendmail to complete pre-formatted email with specific content and send to given email address.
Question:
What tools/methods are available to develop a template that SQL Mail's (SQL Server) xp_sendmail function can utilise without resorting to attachments.
e.g. - how do Amazon.com format and send their automated shipping confirmaion emails ??
View 1 Replies
View Related