Hello,
I am trying to access a web service via reporting services. I know that the web service is fine because I can reach it through an application in c#. When using the reporting services to access the web service, I get the following message:
===================================
An error occurred while executing the query.
Failed to execute web request for the specified URL. (Microsoft Report Designer)
===================================
Failed to execute web request for the specified URL. (Microsoft.ReportingServices.DataExtensions)
------------------------------
Program Location:
at Microsoft.ReportingServices.DataExtensions.XmlDP.InMemoryCommand.ExecuteWebRequest(ICredentials credentials)
at Microsoft.ReportingServices.DataExtensions.XmlDP.InMemoryCommand.Execute()
at Microsoft.ReportingServices.DataExtensions.XmlDP.InMemoryCommand.<>c__DisplayClass1.<ExecuteReader>b__0()
at Microsoft.ReportingServices.DataExtensions.XmlDP.WebRequestHelper.ExecuteServerCallAsNtUser(ServerCall serverCall, WindowsIdentity ntUser)
at Microsoft.ReportingServices.DataExtensions.XmlDP.InMemoryCommand.ExecuteReader(CommandBehavior behavior)
at Microsoft.ReportingServices.QueryDesigners.QueryResultsGrid.ExecuteQuery()
===================================
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlnsoap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<soap:Body>
<soap:Fault>
<faultcode>soaperver</faultcode>
<faultstring>MyService service ERROR --> Value cannot be null.
Parameter name: s</faultstring>
<detail />
</soap:Fault>
</soap:Body>
</soap:Envelope>
1. I tried played with my query but got the same error, so could not figure where the problem is€¦I will be glad to get suggestions about this one€¦
2. Are there any good sources that teach how to build the query? (beside the 'Microsoft techCenter' site)
I have some problem about reporting service add-in.
After I install reporting service add-in for SharePoint, reporting service menu does not appear in Application Management Tab in SharePoint Central Administration.
I try to uninstall and re-install again, it remain not work.
The request failed with HTTP status 405: Method not allowed. (Microsoft.ReportingServices.SemanticQueryDesign)
------------------------------
When I checked services I realised that Reporting Services wasn't started. I tried starting it and received a message:
"The Sql Server Reporting Services (MSSQLServer) started and then stopped. Some services stop automatically if they have no work to do.........."
I also tried to start the service from Configure Report Server and received an error:
"System.ServiceProcess.TimeoutException: Time out has expired and the operation has not been completed. at System.ServiceProcess.ServiceController.WaitForStatus(ServiceControllerStatus desiredStatus, TimeSpan timeout) at ReportServicesConfigUI.Panels.ServerInformationPanel.StartStopServiceTask(Boolean start)"
Any idea why this is happening? Should I install SP2?
I have installed reporting services from SQL Express SP1 package. OS is Windows 2000 SP4. Just after installation "Reporting services" service has StartMode=Automatic and LogOnAS=LocalSystem as shown in SQL Server Configuration Manager. When system is rebooted reporting services state is Stopped and there is 2 errors in System log: 1. Timeout (30000 milliseconds) waiting for the SQL Server Reporting Services (REPS) service to connect. 2. The SQL Server Reporting Services (REPS) service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion. If i select "start" from service's context menu then it starting normally and it's state becomes Running. What can i do to make reporting services starting automatically on system load?
I am building a webapp that calls an SSRS instance to display a report based on another servers web service.I can make a call from the ssrs server using this in the RDL:
<Query> <Method Namespace="http://machine/webservices" Name="HelloUser"> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â <Parameters> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â <Parameter Name="user"> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â <DefaultValue>Craig</DefaultValue> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â </Parameter> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â </Parameters> </Method> <ElementPath IgnoreNamespaces="true">*</ElementPath> </Query>
This works no problem. but.. I want to have the user parameter "Craig" be a parameter passed in from the web app. If it were a regular SQL data source you would put @user in the query. How do you do it with XML text queries?
This is the exception i getThe current action cannot be completed because the user data source credentials that are required to execute this report are not stored in the report server database. ---> The current action cannot be completed because the user data source credentials that are required to execute this report are not stored in the report server database.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: The current action cannot be completed because the user data source credentials that are required to execute this report are not stored in the report server database. ---> The current action cannot be completed because the user data source credentials that are required to execute this report are not stored in the report server database.
Source Error:
Line 3382: [return: System.Xml.Serialization.XmlElementAttribute("SubscriptionID")] Line 3383: public string CreateSubscription(string Report, ExtensionSettings ExtensionSettings, string Description, string EventType, string MatchData, ParameterValue[] Parameters) { Line 3384: object[] results = this.Invoke("CreateSubscription", new object[] { Line 3385: Report, Line 3386: ExtensionSettings,
I have an instance of SSRS that will not run my report subscriptions if it is using a dedicated domain account I made for the express purpose of using it to run this service.
If I have SSRS use my personal domain account as the service account, my subscriptions run correctly. If I have SSRS use this other domain account, the subscriptions do not run.
What else do I have to configure to make this run correctly not on my personal account?
Error message below.
"ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: AuthzInitializeContextFromSid: Win32 error: 5; possible reason - service account doesn't have rights to check domain user SIDs., Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. ;"
i have a list report some values of this are blank or null i want to avoid that spacing if it is null like name:jjj lastname kkk firstname address uuuu
i want it should be name jjj lastname kkk address uuuu
I've a slight problem with configuring my Report Server. I have set up everything apart from the initialisation and and the Windows Service Identity, however when I select the panel for the latter I am presented with a message box displaying the following:
" Reporting Services Configuration Manager:
There was an error while switching panels. The most likely cause is an error retreiving WMI properties. The exception details are:
InvalidArgument=Value of '1' is not valid for 'SelectedIndex'.
Parameter name: SelectedIndex "
I have tried re-installing the entire SQL server setup and this made no difference, I followed this by removing then reinstalling just the Report Service. Still nothing.
Any ideas as to what it is doing and how I should go about fixing it?
SQL Server Reporting Services 2005 Service would not Start on windows server 2003. Working great till yesterday and no changes were made to config file.
Here is the error in Event log
Event Type: Error Event Source: SQL Server Report Service Event Category: None Event ID: 0 Date: 12/13/2007 Time: 8:25:59 AM User: N/A Computer: XXXXXXXXXXX Description: Service cannot be started. Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information. at Microsoft.ReportingServices.Library.ServiceAppDomainController.Start(Boolean firstTime) at Microsoft.ReportingServices.NTService.ReportService.OnStart(String[] args) at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state) For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Here is i found in log files ReportingServicesService!resourceutilities!4!12/13/2007-08:25:59:: i INFO: Running on 0 physical processors, 1 logical processors ReportingServicesService!servicecontroller!4!12/13/2007-08:25:59:: e ERROR: Exception caught loading and setting code permissions policy level: System.Security.XmlSyntaxException: Invalid syntax on line 158. at System.Security.Util.Parser.GetRequiredSizes(TokenizerStream stream, Int32& index) at System.Security.Util.Parser.ParseContents() at System.Security.Util.Parser..ctor(Tokenizer t) at System.Security.SecurityManager.LoadPolicyLevelFromStringHelper(String str, String path, PolicyLevelType type) at System.Security.SecurityManager.LoadPolicyLevelFromString(String str, PolicyLevelType type) at Microsoft.ReportingServices.Library.ServiceController.SetAppDomainPolicy() ReportingServicesService!servicecontroller!4!12/13/2007-08:25:59:: e ERROR: Error Starting Service: System.Security.XmlSyntaxException: Invalid syntax on line 158. at System.Security.Util.Parser.GetRequiredSizes(TokenizerStream stream, Int32& index) at System.Security.Util.Parser.ParseContents() at System.Security.Util.Parser..ctor(Tokenizer t) at System.Security.SecurityManager.LoadPolicyLevelFromStringHelper(String str, String path, PolicyLevelType type) at System.Security.SecurityManager.LoadPolicyLevelFromString(String str, PolicyLevelType type) at Microsoft.ReportingServices.Library.ServiceController.SetAppDomainPolicy() at Microsoft.ReportingServices.Library.ServiceController.StartService(Boolean firstStart)
I found out the data I need for my SQL Report is already defined in a dynamic dataset on another web service. Is there a way to use web services to call another web service to get the dataset I need to generate a report? Examples would help if you have any, thanks for looking
We are using the whole BI-package from Microsoft - from SQL, DTS-package,Raporting Service and Analyze Service.
It should be very helpful to be able to create a metadata databases where you could find all releations between different objects (tables,views,reports,cubes,DTS-package,Databases.
Just to get answer for: 'where is view xxx used', 'what are Report xxx depending upon'.
While everything exists in different SQL databases it should possible to do.
I am trying to migrate my reports from SQL server 2000 reporting services 32bit to 2005 64bit. I am following the migration steps that MS specified. Restored my Reportserver and ReportserverTempDB databases Then I was using the configure Report services to upgrade these databases but I always end up getting the follwoing exception when I run the upgrade on the "Database Setup" configuration for 'ReportServerTempDB' database System.Data.SqlClient.SqlException: Could not locate entry in sysdatabases for database 'ReportServerTempDBTempDB'. No entry found with that name. Make sure that the name is entered correctly. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Common.DBUtils.ApplyScript(String connectionString, String script) at ReportServicesConfigUI.SqlClientTools.SqlTools.ApplyScript(String connectionString, String script)
It's driving me crazy, why is it looking for 'ReportServerTempDBTempDB' in the catalog instead of 'ReportServerTempDB'? Is it possible to migrate from 32bit to 64bit?
In our project, we would like to use the same data source for our analysis service database cubes and for our reporting service reports.
I created the analysis service project first, deployed successfully. When trying to setting up the data source in the report model project, I selected the "create a data source based on another object", and then selected the "create a data source based on an analysis service project". However, there is no analysis service project to select, and no browse button to see where the reporting service is looking for analysis service project either.
I have tried creating a new analysis service project with data source views, cubes, dimensions and all the stuff, but still cannot see the analysis service project in the drop down box to be selected for my reporting model project data source.
As I am fairly new to the reporting service, I'm sure I'm missing something, but couldn't find much information in the help or on the web. Any suggestion would be much appreciated.
I'm attempting to obtain a cost effective solution for my existing customers to develop reports on their SQL 2000 Server installations using their Reporting Services 2000. With products like Visual Basic.NET 2003 becoming almost impossible to obtain, I have at least one customer who is running into a dead end.
One option possibly is the SQL Express with Advanced Services download, which has Reporting Services. My questions are as follows:
Can the report designer component of SQL Express Reporting Services be configured to connect to an external database (which would happen to be a SQL 2000 database) to establish its datasets? Does the resultant designed report end up in an RDL file? If the customer published this report via the Reporting Services 2000 Report Manager, would the report be able to run?
Sorry for asking a question like this that I could probably answer on my own, but my customer needed this answer yesterday. I have scoured the web and microsoft sites - and posted a question on the official SQL Reporting Services cateogy ... in an attempt to answer the basic question of how to design reports for Reporting Services 2000 in the absence of Visual Basic.NET 2003 (or other .NET 2003 tools) with no success.
Can we pass the Database name/Catalog name for the datasouce that will be used for report, as a report parameter . Is yes can any one help me on how to achieve that .
I work in a big project and we will begin in using reporting services as the base technique for reports and I will be responsible for this part. but I have a problem I will discuss in the following:
Currently: We use currently devexpress reports and we have 2 languages(Arabic and English). the data in tables saved in two ways (Arabic and English). when the end user change the language of the web site the report data language changed when run it.
Example:
we have table with (ID, NAME_AR, NAME_EN, JobTitle_AR, JobTitle_EN). designed report will display(ID, NAME_EN, JobTitle_EN) . but the end user change the language of the system the report will
I am using SQL Server 2005 Reporting Services. I want to make it secure. I am also using WCF services and made them secure using Claim based System.Identity Model.
I want to apply same claim based model to Reporting Services.
Our DBA has installed reporting services on a server and now in order to access the report manager, one has to be an Admin on that Server. I am guessing that there is a mistake in the configuration of Reporting Services. Usually it should allow anybody who was added to the roles in the properties section of the Report Manager, right? I have also added the users to the DB..
Also I am using Windows Authentication to access Report Catalog items (Reporting Services is installed on Server2) from a web Application(deployed on Server1) and displaying the report using report viewer. For some reason, server1 has to be in an Admin role on Server2 to access the report catalog/report. This is kinda strange for me as I don't want everybody to be an Admin on Server2. Can anybody please point in the right direction?
We have installed SQL Server 2005 with reporting services.When tried to open getting errors as below: how to avoid such errors See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
ReportServicesConfigUI.WMIProvider.WMIProviderException: A WMI error has occurred and no additional error information is available. ---> System.Runtime.InteropServices.COMException (0x8000000A) Â at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) Â [code]...
We've got a requirement to build the real time report. user can browse report at any point of time and need to see the latest data(stock market) in the report.
I've few options down...
1. Directly point to OLTP database as source and write stored procedure to show result set.
2. Replicate the database and write the SP's to reports. To avoid pointing directly to OLTP db.
3. To build the datawarehouse with dim & facts to show it in reports. I prefer this as a standard method, but this would have some latency depending on trasaction load which will differ from the requirement.
We are required to gather certain information regarding reporting services.
Which reports were requested, by whom , how long did they run for, what parameters were passed etc etc.
I see that the system tables do provide some of this information, is there a 3rd party tool or something we can use to gather all this type of information for us?
Hi, I have just install SQL 2005 SP2 and trying to get Window SharePoint Services V3 integrated with SQL 2005 SP2 reporting services. In SharePoint Central Administration, I select the Reporting Services Integration page and have setup the Report Server Web Service URL and Authentication Mode. I then goto Grant database access, specify the SQL server name, get promted for a username and password that has access SQL Reportserver and get the following error "The group name could not be found" Does anyone have any ideas? Thanks
We built our prod server [vm] with SQL Server 2008 R2 on Server 2008 R2. It works nicely. Then we made a copy of the VM and renamed it (so our test environment would be IDENTICAL to production). After that, SSRS was broken: I get "HTTP Error 503. The service is unavailable." I can't connect via http, or SSMS.
We have tried:
*Â Running SSRS config tool (several times)
* Running with/without the IIS Server Role
*Â Dropping & recreating the SSRS keys
*Â Recreating the ReportServer database, etc
*Â Checking all of the accounts, permissions, etc
*Â Running SQL Repair
*Â Going through the registry to fix any references to the machine's old name
*Â Uninstalling, reinstalling SSRS
* Completely uninstalling ALL of the parts of SQL Server 2008 R2, deleting all directories, removing references to SQL Server from the registry, rebooting, reinstalling everything.
None of this has worked. SSRS [R2] is still 503 on our test box.
the SSRS [NT] service seems to run, without error. The Event Viewer doesn't seem to be recording any errors. The SSRS logs say that the default URL is wrong, but we get the same error in Prod, and Prod works fine. The other SQL Logs say something about not being able to contact the service. However, as I said, the [NT] service seems to be working fine.
I think I've seen a similar post on a blog or on the forums - but it seems like this should be possible -
I have an MDX query - that works fine in SQL Enterprise Manager, and has my dimension members on columns, and my measures on the rows. When I try the same query in Reporting Services, I get the error:
"The query cannot be prepared: The query must have at least one axis. The first axis of the query should not have multiple hierarchies, nor should it reference any dimension other than the Measures dimension.. Parameter name: mdx (MDXQueryGenerator)"
Although it works when you pivot the view, I really need my data presented with the members on the columns and the measures on the rows. Another forum post mentioned using the SQL 9.0 driver, but I can't see this listed anywhere (the only one I see is the .NET framework Data Provider for Microsoft Analysis Services).
Here's what my query looks like -
SELECT { [Time].[Month].&[2006-09-01T00:00:00] , [Time].[Month].&[2006-10-01T00:00:00], [Time].[Month].&[2006-11-01T00:00:00], [Time].[Month].&[2006-12-01T00:00:00] } on COLUMNS, { [Measures].[Unique Users], [Measures].[UU Pct 1], [Measures].[UU Pct 2], } ON ROWS FROM [Cube]
I'm trying to create reports in RS2005 using AS2000 as my data source. I understand that if I use RS2005 on AS2000, I wont be able to enjoy the OLAP based parameters as in using AS2005. Does anyone know an easy way to easily use Parameters in RS2005 while still using AS2000?
