Resetting Page Number On Group Break
Apr 21, 2008
Hi,
I have a report where i do a page break for each supplier. I want to reset my page number to '1' when there is a group break.When i googled for this functionality i found the following chris Hay's blog which provides the solution.
http://blogs.msdn.com/chrishays/archive/2006/01/05/ResetPageNumberOnGroup.aspx
But if i follow the same, I get #Error instead of page number during the run time.How do i resolve the error?
Also, I want to display the "page 1 of totalpages in group" like that. Is that possible?
Thanks in advance
View 1 Replies
ADVERTISEMENT
Dec 20, 2007
how can i avoid a page break in a group.
Thanks in advance.
View 3 Replies
View Related
May 20, 2008
I am using RS 2005 with SP2. I am trying to print a table Group footer on a brand spanking new page. I have checked the "Page Break at Start" of the Group, However in the Report view the footer starts printing directly below the end of the group, and not on a new page. I have also tried to add a rectangle to the group footer and selected Page Breaks before rectangle but the group footer still doesnt print on a page of its own. I would appreciate any suggestions.
View 3 Replies
View Related
Oct 5, 2007
I am using three groups in my report on a table. The option "page break at end" is checked in all three groups. It is working fine as for report output is concerned but in print preview it generates extra pages. In print preview page break gets occured at every group regardless of the fact that group break occurs or not. As a result, it is generating extra pages. please help me out
thanks.
View 3 Replies
View Related
Apr 17, 2008
Hello,
I'm trying to solve an undesired behaviour on my report. I have two nested drill-through groups (in fact, it doesn't matter if there two nested groups), and although I haven't ticked any option related to insert a page break after the group, if the group is too large to fit in a page, i get the first element of the group in the first page (collapsed), and the second element in the third page. So, by now, my report looks like this:
page 1:
|
+ Value1 |
|
|
----------------
page 2:
|
blank |
|
|
----------------
page 3:
|
+ Value2 |
|
|
----------------
page 3:
|
+ Value3 |
+ Value4 |
|
----------------
And what I want is that it looks like this:
page 1:
+ Value1 |
+ Value2 |
+ Value3 |
+ Value4 |
----------------
Is it possible to achieve that behaviour? How?
Thanks in advance, regards
View 4 Replies
View Related
Feb 25, 2008
I have a report with a table. Inside the table I have a subreport in a group footer and I want to force a page break before the footer.
I've tried putting the subreport inside a rectangle and set the rectangle to have pages breaks but that doesn't work.
any ideas?
Thanks!
View 4 Replies
View Related
Dec 5, 2007
Hi
I'd like a parameter for the report layout: Portrait Or Landscape. So is it possible to set the page high and width using an expression or in code based on my parameter?
Also on a similar note. I want a parameter for 'Page Break After X'. Is it possible to apply a page break after my table group X based on this parameter? I know if I edit the group I can tick 'page break at end' but I can't apply an expression to this.
Cheers
View 8 Replies
View Related
Feb 18, 2008
How can I stop a group from being split across 2 pages?
1 table group
1 detail group consisting of 2 rows, can be N number of these per table group
e.g.
TG1
DG1row1
DG1row2
DG2row1
DG2row2
...
DGnrow1
DGnrow2
TG2
DG1row1
DG1row2
DG2row1
DG2row2
...
DGnrow1
DGnrow2
<--page break should occur here-->
TG3
DG1row1
DG1row2
DG2row1<--but it is actually appearing somewhere like this-->
DG2row2
...
DGnrow1
DGnrow2
If TG can fit on one page, then it should do so
I can't put a page break after a group, as it may only be 4 rows, this would be too wasteful
View 6 Replies
View Related
Mar 23, 2007
Hello All!
Is there a "clean" way to group rows from a table by the row count, and then force a page break each time the count hits a maximum number (say 25 rows)?
As an alternative, can you set the maximum count of rows in a table, and then force a page break if it reaches that count? (this may actually be a better solution for my needs).
Thanks!
View 7 Replies
View Related
Nov 2, 2015
I developed a main report containing numerous subreports. But now I'm trying to page break on these subreports and because these subreports all have sub-sub reports, I get this error when I try to run this report..The value '22' is invalid. Valid values are between '0' and '1'. (rrRenderingError)..I am grouping on uniqueidentifers and I do not get errors on subreports that have sub-subreports. How can I avoid this error and get these subreports to page break? (I don't get any errors if I remove the page breaks).
View 3 Replies
View Related
Sep 29, 2015
I have a group in my report that contains an empty footer row to get a better visibility. Because the row has a frame it should be hidden if its the last row on the page. How can I manage that?
View 4 Replies
View Related
Dec 6, 2007
I have a report with several matrix objects. The data contained in each matrix is simple. One matrix has one column of labels and a column of data. The other has 3 columns of data. Both matrix's only show about 25 rows of data. A variable amount of data is displayed above the matrix's so that sometime the render across a page boundary. Whenever this happens the matrix doesn't render rows down to the bottom of the page. A considerable amount of empty space is left on the page, the completed matrix is displayed on the next page. I'm wondering how to get the matrix to render in this empty space.
This problem only occurs when I view the report on screen, in the Visual Studio "Preview" window, or from the Report Server web site. Tiff, pdf and printed output doesn't contain the extra space.
I've tried adding my matrix to a List and a Rectangle to see of this would fix the problem but it didn't help.
I've check the dimensions and margins or the page and I don't think I have any sizing problems, everything should fit on the page.
--Mark
View 1 Replies
View Related
Sep 26, 2006
I know how to reset the page numbers with each group, but how do you reset the total page number within each group.
EX. Code for page of total pages
="Page " & Globals.PageNumber & " of " & Globals.TotalPages
EX. Code to reset within a group
Custom Code:
Shared offset as Integer
Shared currentgroup as object
Public Function GetGroupPageNumber(group as Object, pagenumber as Integer) as Object
If not (group = currentgroup)
offset = pagenumber - 1
currentgroup= group
end if
return pagenumber - offset
end function
=Code.GetGroupPageNumber(ReportItems!Category.Value(grouping),Globals!PageNumber)
What I need is code for a combination of the two...to display code for page of total pages that resets within a group.
Any help is greatly appreciated.
Thanks!
View 4 Replies
View Related
May 7, 2015
I have a report with multiple tables. I need to show each tables in different pages. When there is no data for tables/tables , it is coming with the next table which has data. I have given "Add a page break after" option in the tablix but still the tables are coming together when no data available. How can I show it in different page?
View 2 Replies
View Related
Nov 11, 2015
How do I add a hard page break in the middle of a two page report? I use Microsoft reports for windows.
View 5 Replies
View Related
Jul 15, 2015
I have four columns in my table, the first one is the identity column
col1 Col1 col2 col3
1 12 1 This is Test1
2 12 2 This is Test1
3 12 3 This is Test3
4 12 4 This is Test4
5 12 5 @@@@@
When, I see, @@@ sign in my col4, I need to restart the col3 from 1 again so it will look like this
col1 Col2 col3 col4
1 12 1 This is Test1
2 12 2 This is Test1
3 12 3 This is Test3
4 12 4 This is Test4
5 12 5 @@@@@
6 12 1 This is another test1
7 12 2 This is another Test2
Is it possible to do that?
View 8 Replies
View Related
Apr 7, 2004
Hello!
Got a problem I hope some clever people can help me out with..
I have a web form that displays a set of records in a grid. The grid is "paged" according to a PageNum column, with a dropdown box to change pages and buttons allowing the items to be moved up or down a list within a page or moved between pages. So the backend table (simplified) looks something like this
PageNum ItemNum ItemDescription
----------- ----------- -------------------
1 1 aaaaaaa
1 2 bbbbbbb
1 3 cccccccc
2 1 ddddddd
2 2 eeeeeee
2 3 ffffffffffff
3 1 ggggggg
3 2 hhhhhhh
3 3 iiiiiiiiiiiiiiii
The problem is when I want to delete a page - I need the page numbers to automatically resequence themselves, so for example, If I delete "Page 2" (i.e. delete rows where PageNum = 2), all items on "Page 3" become "Page 2" (and any items on "Page 4" become "Page 3" etc).
This has proved straightforward to when deleting an item from a particular page, and can resequence ItemNum thanks to a clever bit of code found on SQLteam.com:
DECLARE @intCounter int
SET @intCounter = 0
UPDATE <Item Table>
@intCounter = ItemNum = @intCounter + 1
WHERE Pagenumber = <Currently Selected Page>
However I haven't been able to adapt this to resequence the Page number, as this involves resequencing blocks of numbers. The closest I can get is:
DECLARE @intCounter int
SET @intCounter = 1
UPDATE <Itemtable>
SET @intCounter = PageNum = CASE
WHEN @intCounter = PageNum - 1 THEN @intCounter + 1
WHEN @intCounter = PageNum - 2 THEN @intCounter + 1
ELSE @intCounter
END
But this doesn't quite work.
Anyone got any other ideas??
Thanks
Greg
View 3 Replies
View Related
Mar 13, 2008
Hi!
First of all...sorry for my english.
I have a table that I want to show only 3 times in every page. If the dataset return to me 7 results i want to show The first 3 in page 1, the second 3 in page 2, the last in page 3... only 3 in every page.
I created that function:
Function saltoCada(ByVal n As Integer)
If (iCount < n) Then
iCount = iCount + 1
Else
iCount = 1
End If
Return iCount
End Function
I created a group in a table with that expression: =Code.saltoCada(3) and then add a page break at end in the group.
Is that the way to do this?It doesn't work.. Any ideas?
Thanks!
View 4 Replies
View Related
Aug 21, 2007
I have a main report that calls subreports. When a subreport has enough data such that it will not fit into the remaining area of the current page the renderer inserts a page break leaving alot of ugly white space. Is there any way to sop this behaviour? This seems like a very basic thing.
View 17 Replies
View Related
Mar 31, 2007
Hello:
I have a report in SQL Reporting Services 2000.
This report have a table with :
Property visibility -> Hidden -> =False
And for that all the rows will in 1 page, right?
The problem is that, if i removed that, It will have to many pages because have a field that hide this rows ,
dinamically.
but like i said is to many rows, so I need to find out a way to forced a Break Page
I ' ve try this:
I created a function that returns a boolean number
and put it here
<PageBreakAtEnd>=Code.BreakPage(Parameters!expanded.Value, CountRows(First(Fields!ProductID.Value))</PageBreakAtEnd>
BUT IT DOESN'T WORK..........!!!!!!!!!!!!!!
I really hope you can help me..
View 1 Replies
View Related
Sep 25, 2007
I must be missing a check box somewhere........ I simply added a group to a report and need to do a "Page Break Before" each group. I found the check box to do that, and the report works as expected, BUT I get a blank fist page. So how do I prevent a "page break" on the "first time through"?
View 11 Replies
View Related
Feb 16, 2007
Using SSRS 2005, I have a simple "letter" report that has a page header and body. The body has a single table and I have set the "page break on end" property to true, but the report ignores that setting and prints the report as one long letter.
I'm sure I'm just missing some very simple point, but cannot figure out what it is. Any ideas?
Thanks.
View 1 Replies
View Related
Apr 21, 2008
Hello,
I have a tabular data region.
Outside of this tabular, I have to put a text box (Entity) with a field. I want to get a page break with this field. How can I do that, as this field is outside of the tabular data region.
Example:
Entity : Name
COL1 COL2
XXXX XXXX
Thank you so much for your help.
View 8 Replies
View Related
Apr 11, 2008
Can anyone pls let me know how to insert page break after few rows in a report(SSRS)?
View 1 Replies
View Related
Jan 29, 2007
Hi,
I have developed a simple report containing a table which has one group. The group has property 'Repeat Group Header '.
I can see the report when it returns data which spans more than one page. Other wise I see a blank page when seen from the web application. The report is seen properly in Designer.
I found out that if I had a 'Page Break at start' = True for the table, I can see the reports containing single page. But this page break is not acceptable.
Has anyone faced similar issue? Whats the solution to it?
Thanks,
Tanmaya
View 1 Replies
View Related
Oct 29, 2007
I'm having an odd problem that I've never experienced before. I have a couple of tables and then a bunch of text fields. Each table needs to start on a new page, as does the collection of textboxes. I can accomplish this for the two tables but not for the text boxes. When I set pagebreadatend to true for the second table, the textboxes come right after it as if it were set to false. I even embedded a rectangle in btween the table and the textboxes and set its pagebreakatend to true, but this also did not have the expected effect. What is going on here? There's nothing funky about this report, no subreports, no conditional visibility, etc.. Thanks for any help!
View 1 Replies
View Related
Mar 19, 2008
Hi,
I am planning to put some page break in my SQL 2005 report using Table Property-general tab and it does not have any effect, if I select INSERT PAGE BREAK or not.
It gives a page brreak byitself and when I print the data in PDF, it gives extra page breaks arbirtory.
Can someone please help me.
thanks
View 4 Replies
View Related
Feb 19, 2007
hi all
i m using two subreport in my report. i want to show each subreport in different page. pls suggest me how i can implement this.
thanks in advance
View 2 Replies
View Related
Apr 20, 2015
I want to page break after after 6 grno recored.I used ceiling(rowNumber(Nothing/6)) but it worked differ(this fun used on top most group )below I attached screeshot. I need to page break after 6 grno record but above syntax measure 6 datafiled row and then page break.how I can page break after 6 grno record
View 3 Replies
View Related
Sep 16, 2007
Hello,
In crystal these are available-
1- Conditional Page break 'OnLastRecord'- I have few groups and if I put page break it breaks on each group even if that group has 2 rows but I want a break at the end of the page. So is there conditional page break in SSRS 2005.
2- I am also having problem with controlling Number of lines in a page, few pages are very long as compared to others, though when export to pdf it gives according to the page size set, but not while viewing, is there any work around to this in SSRS 2005.
I will appreciate any suggestion or comment.
regards
View 8 Replies
View Related
Feb 28, 2008
Hi All,
I defined a report based on a matrix having 3 field groups. I defined Interactiveheight to have fixe number of rows in HTML rendering. My problem is that this parameter is only taken into account after first page. My first page always breaks after end of first field group + 1 row of next group.
Do you have any idea, what's causing such behaviour? And what would be the solution?
Thanks
View 9 Replies
View Related
Feb 27, 2008
Hello all-
I have a situation where a textBox can span multiple pages. When this occurs I lose a label that I have at the top of the page, containing data from the dataset. The label is set to repeat on every page and works great with the exception of this case.
So my questions would be :
1) is it i possible to force the render of the a label (a textbox) in the case that a page break is due to an abhorrently long textbox value?
-OR-
2) is it possible to inject a field from my dataset into the page header?
Thanks-
Tristan
View 1 Replies
View Related
Apr 21, 2008
Hi all
Is there any way to display 5 records per page,when i display report in reporting services.
Pls Help me
View 5 Replies
View Related
