Hi,
I am trying to restore SQL2K DB backup to SQL2005 Express. The process goes fine, but at the end of the process (100% progress), it shows error Restore Could not start database.
It does not provide more detail to remedy the error.
Anybody faced this problem and have any solution?
Thanks,
Hiten
I have seen this before. A 2000 restore fails, leaving the database thinking it is being restored but the restore job failed and errors when it is restarted. EM is clueless. I believe there is a proc to reset some flag. Can you share it with me???
Thanks!
11/19
Trying to keep out sysadmins & sa during/between database RESTORE
Configuration:
WINNT Server Enterprise 4.0 w/SP5
SQL Server 7 Enterprise & SP1
2 SQL Servers:
Production Server
Standby server
I Backup (full backup) databases to disk on primary server (logical backup devices are physicaly located on a Standby server (dedicated gigabit NIC in each server for this process). Transaction logs are applied to the Standby server throughout the day.
Problem:
How to keep out "sa" and sysadmins from a database while I'm restoring (or between restores) to a standby server?
The database being restored cannot be in use during a restore.
If a DBA forgets that this process is happening, the statement fails (RESTORE)for the database they happen to be in at the time of the restore.
Example restore statement:
Standby Server -
RESTORE DATABASE databasename FROM database_dd WITH DBO_ONLY, REPLACE, STANDBY = 'g:Mssql7FromPrimaryDatabaseName_undo.ldf'
I could restrict Domain sysadmin access and change sa password. I could also put the database in "Single user" mode, however this could become problem if my process disconnects and then someone else connects - then my process is locked out. What I'm really looking for is to lock out all activity for a database that is in "standby mode" except for RESTORE processes.
Any ideas??
Wade
wadej@vailresorts.com
I am running Web Matrix version 0.5, .Net version 1.1 on a computer with XP Pro.
Web Matrix works fine and returns forms properly.
I installed MSDE from the website (SQL2KDeskSP3a.exe) I
believe that SQL Server IS running, because I see the tower icon with a
green arrow; when I double-click that I get a message that it is
running SQL Server.
When I click the "data" tab in Web Matrix I get the blank
workspace. Then I click the New Connection icon at the top left,
which opens up a dialog box. I change "Windows Authentication" to
"SQL Authentication." That opens up the Username/Password
prompt. I am entering "sa" for the username (I AM NOT SURE IF
THAT IS CORRECT) and "**secret**" for the password (that's what I
entered in the command prompt when I setup the MSDE). Then I
click "Create a New Database." I am asked to enter a name.
After a pause, I get an error message: "Unable to connect to
the database server. SQL Server does not exist or access denied.
Connection Open (Connect ( )). OK
Do you have any ideas?
We need to start a job automatically when SQL Server 6.5 automatically starts.
Like adding a user into tempdb.
Is there any clue?
I've search this forum and the web - tried this with and without sqlagent running and it always fails:
alter database dbname set enable_broker
I believe there are messages in queues somewhere, but have no idea how to see if and how many there are.
Maybe the broker for this database can't be enabled with too many messages in the queue?
I found code on here that was supposed to clear all message queues, but it never completes.
Anyway...someone else designed this entire system and I have no knowledge of the service broker.
Help!
I'm taking a database(read-only) backup from one server and restoring it on other server. As soon as restore is done it is bringing database into single-user read-only mode.
why it is bringing the database into single user mode ?
Hello,i am in great trouble. I want to revert back to original state ofdatabase before i performed restore database on my sql server 2KDatabase. Accidently i didn't take backup of my Database and i didrestore, so is there any way to get the original state back of myDatabase?Any suggestion will be highly appriciated.Regards,S. Domadia.
View 2 Replies View RelatedHi everyone I have been trying hard to unserstand the way my isp does things sort of a communication gap I guess. The problem is I want to use the personal website... yes I know this is a SQL forum and that is what I am going to get at. I having a problems with the database aspect of the whole situtation, I can't creat a aspnetdb.mdf on their server because that name aready exists and I am assuming that it is the system and not a user that ows it. Also I can't name the other database personal.mdf either for the same reasons, so someone at the isp has had me creat a different name database during the install process of the application and that worked fine for a little while and now it does not work no more and I am getting old faster than I'd like. So here is my plan my plan is to wipe out the current database for the application on my workstation but first make a list of tables and then create a new database for that web application. So I ask is it feasible and what do I have to look out for and if it is not to much to ask what steps might take to accomplish such a task. I want to thank anybody that is willing to help me in this matter.
DKB
Hello,
I was wondering if someone could help me answer this question.
If I had a site like Yahoo, that constantly had users accessing it. Would it be a good or bad idea to automatically open a database connection to SQL Server on Application Start? What would you recommend? Would opening and closing the DB connection on every page save alot of overhead and bottleneck? Thank You.
I dont know how this happened but my (local) SQL Server wont start. I cant access any of the databases. I just get this error:
'A connection could not be established to (local).
Reason: SQL Server does not exist or access denied.
ConnectionOpen (Connect())
Please verify SQL Server is running and check your SQL Server registration properties (by right-clicking on the (local) node) and try again.'
If I go to check the properties I get the same error. Im completely locked out. I looked at the folder and the database files are there, but I cant get to them through Enterprise Manager.
I have no idea how this problem could have happened. It just seemed to have stopped working. All my other databases can be reached (they are external). Could this be a virus or something? Can someone help me out on this one? I dont have a clue what the problem is, much less how to fix it.
Thanks.
HI
I have sql database. now i want to connect to this server and get the data. Please let me know how to initiate the server and get the data.
Earlier the program is using MS access database and code is like below.
CDaoDatabase* pDB = NULL;
pDB = new CDaoDatabase;
char query[256], *name;
try
{
// Force usage of latest DAO engine
AfxGetModuleState()->m_dwVersion = 0x0601;
AfxDaoInit();
char *dbPath = new char[strlen(envVar) + 40];
sprintf(dbPath, "%s\MilkDB.mdb",envVar );
pDB->Open(dbPath);
}
now i am using sql server as database size was increased a lot. So please let me know how to initiate sqlserver from C program.
Thanks in advance.
Thanks
venkat
I'm trying to migrate a compensation database from Access 2010 to SQL 2014. It's not a very large database. It has 12 tables. One table, the Wage table, has information in it that I wouldn't consider as being a wage. For example, it has a few Life Policy columns. I want to design the database correctly in SQL, and not just duplicate the design flaws from Access.
View 4 Replies View RelatedI am getting this message in the SQL Server error log:
Could not start Service Broker for database id: 10. A problem is preventing SQL Server from starting Service Broker. Check the SQL Server error log for additional messages.
It appears even when the broker is disabled on the database. How can I eliminate this error?
Thanks!
I just installed SQl Server 2005 on my Windows XP Pro system. But I can't figure out how to start the Database Engine. In the MS SQL Server Management Studio I see one Database Engine, but not SQL Servers. If I do "Update Local Server Registration" nothing happens. If I do right-click "New Server Registration" I get a databse icon with a white open circle. If I the try "right-click, Connect, Object Explorer" I get "An error has occurred while establishing a connection to the server...". All this time the right Summary pane is showing "No Server Connection."
The tutorials are no help and do not function as they describe.
Sample databases install but do not show up in program list as they are supposed to.
How do I start up my SQL Server Database Engine with a new database?
Why do none of the tutorials show you what to do?
Assistance would be greatly appreciated.
Anybody figure a way around this:
In a development server you take a backup and you want to move the entire database to a production server. The production server does not contain the database, users, or logins in master.
When you restore the backup to production in 7.0, the users get moved to DBO because the logins do not exist and then you cannot delete them.
We are having to drop the users from the database on development, back up the database and restore it to production, then recreate the users on production.
This is bogus and did not happen in 6.5 because of the aliases.
Anybody come up with a better way?
I am fairly new to VS 2005 and SQL Server CE. I have developed a Desktop Windows application using VB 2005 and the SQL Compact Edition Database. This application will sell to users via web download.
When they download a service patch, or updated version, I wish for them to retain the data in their present database. In other words, fill the new database with the old data. The new table structures will remain intact except for added columns at the end.
Question is how to save the old data and update the new database with it. Is there an easy way to do this, or do I need to write a module to save a database copy, and update the new database with content at install time?
I am hoping someone can help me. I am having issues changing the service account MSSQLSERVER. I changed it to Local System only due to issues installing Service Packs up SP2 Critical. I used the Configuration tool to do so. I have installed all patches up to and including Critical update ( KB 934458 ). I had a heck of a time getting them to install under custom service accounts. Now when I change the service accounts back to a custom account using the configuration tool the service wont start at all.
To be clear. The service runs fine under Local System Account, but I want to run it under a limited account. I used the config tool and made sure the permissions groups were added, but it still fails to start. I am not sure what SSL log entries below is referring to.
I am running:
SQL Server Standard Edition x86
Windows 2003 Stnd SP2
Below is the log file:
2007-09-01 23:50:16.15 spid9s Starting up database 'model'.
2007-09-01 23:50:16.20 Server Error: 17190, Severity: 16, State: 1.
2007-09-01 23:50:16.20 Server FallBack certificate initialization failed with error code: 1.
2007-09-01 23:50:16.20 Server Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2007-09-01 23:50:16.21 Server Error: 17182, Severity: 16, State: 1.
2007-09-01 23:50:16.21 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x80.
2007-09-01 23:50:16.21 Server Error: 17182, Severity: 16, State: 1.
2007-09-01 23:50:16.21 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x1.
2007-09-01 23:50:16.21 Server Error: 17826, Severity: 18, State: 3.
2007-09-01 23:50:16.21 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2007-09-01 23:50:16.21 Server Error: 17120, Severity: 16, State: 1.
2007-09-01 23:50:16.21 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I am not DBA or very heavy IT, but rather a developer wearing multiple hats, for the time being. So any help is greatly appreciated.
Thanks, DMC
i have install vs2005 and wm5 sdk on my pc. i want to develop database application on my pocket pc (database = sqlserver 2005 express)
- i need to install another software on my pc or pocket pc ?
- how to start develop database application on my pocket pc?
thank you
I have a problem when i restore my .DAT_BAK file. I am getting error like "The backup set holds a backup of a database other than existing database. Restore Database is terminating abnormally".
I tried by using
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH MOVE 'VZAI_DATA' TO D:PROGRAM FILES..MSSQLTEST.MDF',
MOVE 'VZAI_LOG' TO D:PROGRAM FILES..MSSQLTEST.LDF',
REPLACE
And also i tried like
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH REPLACE
When i use like this,
RESTORE FILELISTONLY FROM DISK = 'D:DATAMYTEST.DAT_BAK'. I am able to get the output as LogicalName, PhysicalName, Type, FileGroupName, Size, etc.
Can i anyone please help me out?
Thanks in Advance,
Anand Rajagopal
HI,
How can i start to create database diagram in Sqlserver 2005.
Please provide any URL(s).
Thanks and Regards,
Rafeeq
Hi,
I have a MSSQL database running in a Microsoft cluster. I was working on troubleshooting for another SAP problem when they suggested I change the setting using hte SQL Server Client Network Utility to 'named pipes' from 'tcp/ip'. Every since, despite changing it back I'm unable to start the database in the cluster.
I'm kind of a newbie at this so I'd really appreciate any help in getting this database up and running.
Here is the error message from the event log:
sqsrvres] checkODBCConnectError: sqlstate = HY000; native error = 0; message = [Microsoft][ODBC SQL Server Driver]Cannot generate SSPI context
I tried to apply the SP2 on a newly installed SQL Server 2005 Developer edition. The installation failed and the MSSQLSERVER service does not start. I work on 32 bits Windows Server 2003 Standard Edition SP1 with all the patches up to date. I downloaded SQL Server 2005 SP2 on March 15, 2007.
Here are the error messages from 2 of the log files:
Summary.txt:
Product : Database Services (MSSQLSERVER)
Product Version (Previous): 1399
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number : 29534
Error Description : MSP Error: 29534 Service 'MSSQLSERVER' could not be started. Verify that you have sufficient privileges to start system services. The error code is (-2146885628) Cannot find object or property.
SQL9_Hotfix_KB921896_sqlrun_sql.msp.log:
Doing Action: ComponentUpgradeInstall
PerfTime Start: ComponentUpgradeInstall : Sun Mar 18 17:37:33 2007
<Func Name='ComponentUpgradeInstall'>
<Func Name='ComponentUpgrade'>
Failed to add file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG' to datastore in AddFileToFailureHandling
Service MSSQLSERVER with parameters '-r' is being started at Sun Mar 18 17:37:33 2007
Failed to start service MSSQLSERVER. Error code 2148081668
Service failed unexpectedly (2148081668)
Error Code: -2146885628
Windows Error Text: Cannot find object or property.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqls::Service::Start
Source Line Number: 301
And below you can see the content of the SQL error log:
2007-03-18 19:46:11.51 Server Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86)
Feb 9 2007 22:47:07
Copyright (c) 1988-2005 Microsoft Corporation
Developer Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
2007-03-18 19:46:11.51 Server (c) 2005 Microsoft Corporation.
2007-03-18 19:46:11.51 Server All rights reserved.
2007-03-18 19:46:11.53 Server Server process ID is 796.
2007-03-18 19:46:11.53 Server Authentication mode is WINDOWS-ONLY.
2007-03-18 19:46:11.53 Server Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2007-03-18 19:46:11.53 Server This instance of SQL Server last reported using a process ID of 712 at 3/18/2007 5:39:48 PM (local) 3/18/2007 3:39:48 PM (UTC). This is an informational message only; no user action is required.
2007-03-18 19:46:11.53 Server Registry startup parameters:
2007-03-18 19:46:11.53 Server -d C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2007-03-18 19:46:11.53 Server -e C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2007-03-18 19:46:11.53 Server -l C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2007-03-18 19:46:11.56 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2007-03-18 19:46:11.56 Server Detected 2 CPUs. This is an informational message; no user action is required.
2007-03-18 19:46:11.87 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2007-03-18 19:46:11.98 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-03-18 19:46:14.06 Server Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-03-18 19:46:14.06 Server Database mirroring has been enabled on this instance of SQL Server.
2007-03-18 19:46:14.07 spid5s Starting up database 'master'.
2007-03-18 19:46:14.15 spid5s 1 transactions rolled forward in database 'master' (1). This is an informational message only. No user action is required.
2007-03-18 19:46:14.17 spid5s 0 transactions rolled back in database 'master' (1). This is an informational message only. No user action is required.
2007-03-18 19:46:14.17 spid5s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2007-03-18 19:46:14.37 spid5s SQL Trace ID 1 was started by login "sa".
2007-03-18 19:46:14.42 spid5s Starting up database 'mssqlsystemresource'.
2007-03-18 19:46:14.50 spid5s The resource database build version is 9.00.3042. This is an informational message only. No user action is required.
2007-03-18 19:46:14.89 spid5s Server name is 'YODA'. This is an informational message only. No user action is required.
2007-03-18 19:46:14.89 spid9s Starting up database 'model'.
2007-03-18 19:46:15.06 spid9s Clearing tempdb database.
2007-03-18 19:46:15.67 spid9s Starting up database 'tempdb'.
2007-03-18 19:46:15.79 spid12s The Service Broker protocol transport is disabled or not configured.
2007-03-18 19:46:15.79 spid12s The Database Mirroring protocol transport is disabled or not configured.
2007-03-18 19:46:15.82 spid12s Service Broker manager has started.
2007-03-18 19:46:21.62 Server The server could not load the certificate it needs to initiate an SSL connection. It returned the following error: 0x8009030d. Check certificates to make sure they are valid.
2007-03-18 19:46:21.62 Server Error: 17190, Severity: 16, State: 1.
2007-03-18 19:46:21.62 Server FallBack certificate initialization failed with error code: 1.
2007-03-18 19:46:21.62 Server Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2007-03-18 19:46:21.64 Server Error: 17182, Severity: 16, State: 1.
2007-03-18 19:46:21.64 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x80.
2007-03-18 19:46:21.64 Server Error: 17182, Severity: 16, State: 1.
2007-03-18 19:46:21.64 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x1.
2007-03-18 19:46:21.64 Server Error: 17826, Severity: 18, State: 3.
2007-03-18 19:46:21.64 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2007-03-18 19:46:21.64 Server Error: 17120, Severity: 16, State: 1.
2007-03-18 19:46:21.64 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
Any advice???
Dear All,
I am not able to start the sql server 2005 database engine services...
Sql server 2005 server is installed in one machine(SERVER) and we have 10 client machine connecting to the server
When i try to start the service from the Service.msc in the SERVER i am getting the following error
===================================
Cannot connect to KEYSKILL.
===================================
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
------------------------------
Error Number: 2
Severity: 20
State: 0
------------------------------
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
Could any one help me to resolve the error
Thanks in Advance
Lalitha
Sometime during the night last night some user account permissions were "lost". Am I right to think that restoring the master database would be the way to go? We have a 2 node 2012 cluster and I stop the cluster resource and start the db in single user mode from the active node. Somehow the sharepoint farm is still trying to connect so I can't get logged in single user. What method could I use to stop users from connecting when I don't have access to the sharepoint farm.
View 8 Replies View Relatedi have a development database that has updates and changes to a production database. rather than go through individually and alter all relevant tables and stored procedures, id like to back up the database on the development side and restore it on the production side as the production database. is there a way to restore the database on the production server but preserve all the security settings (ie logins and such)? i noticed on our development server, that if i try to restore the database with my development database, it overwrites the users and/or if the user is the same on both, it removes the login name for that user.
View 3 Replies View RelatedHi,
I was wondering how I could restore a bkp file into a database with a different name. For example, I made a backup of T1.mdf and i want to restore t1.bkp to T2.mdf.
I am using VB.Net to do the backup and restore.
Is there any way of doing it?
Thanks!
I have a client that has POS software called Restaurant Pro Express (RPE) from [URL] ...
Their old POS computer had a hardware failure, but I was able to attach the hard-drive to another computer and recover the data. RPE uses a MSSQL database system. However, my client doesn't seem to make backups very often
- the last one is dated January 5, 2015. I was able to copy the C:Program FilesMicrosoft SQL Server folder over which contained the instance as well as all the data files - and has up-to-date information. The instance in the recovered Microsoft SQL Server folder was called MSSQL.1. I installed the RPE software on their new computer, and it too now has an instance called MSSQL10_50.PCAMERICA. The new computer is using MSSQL 2008 R2, while I believe the old computer would have been using MSSQL 2005.
I am no DBA expert, especially when it comes to MSSQL. Is is possible to 'restore' the database from the 'raw' .mdf and .ldf files of the old computer to the new computer / database instance? If so, how should I proceed?
Today we were trying to use restore wizard (recovery advisor) to restore a database which is over 80 GB, but the wizard won't load or start. However the wizard dialog box opens without any problems with all other databases stored in the instance. Is there any problem or reason to why the restore wizard won't come up?
This is SQL 2012 enterprise version we are running.
I used the code below to move the Model database and Model log file to new SAN drive locations.
After running the commands I stopped the SQL server and moved the physical files to the correct location.
Now I am unable to start SQL server, I get error 17204 Could not open file:Access is denied
I think the problem maybe that for FILENAME new_path I put "J:SQL ServerMSSQL.1MSSQLData"
but did not include model.mdf in the file path.
How do I correct the path now that SQL service won't start?
I have included the log file below.
ALTER DATABASE database_name MODIFY FILE ( NAME = logical_name , FILENAME = 'new_path/os_file_name' )
2007-09-11 13:19:31.82 Server Microsoft SQL Server 2005 - 9.00.3042.00 (X64)
Feb 10 2007 00:59:02
Copyright (c) 1988-2005 Microsoft Corporation
Standard Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 2)
2007-09-11 13:19:31.82 Server (c) 2005 Microsoft Corporation.
2007-09-11 13:19:31.82 Server All rights reserved.
2007-09-11 13:19:31.82 Server Server process ID is 3264.
2007-09-11 13:19:31.82 Server Authentication mode is MIXED.
2007-09-11 13:19:31.82 Server Logging SQL Server messages in file 'D:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2007-09-11 13:19:31.82 Server This instance of SQL Server last reported using a process ID of 2648 at 9/11/2007 1:10:02 PM (local) 9/11/2007 8:10:02 PM (UTC). This is an informational message only; no user action is required.
2007-09-11 13:19:31.82 Server Registry startup parameters:
2007-09-11 13:19:31.82 Server -d D:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2007-09-11 13:19:31.82 Server -e D:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2007-09-11 13:19:31.82 Server -l D:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2007-09-11 13:19:31.84 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2007-09-11 13:19:31.84 Server Detected 4 CPUs. This is an informational message; no user action is required.
2007-09-11 13:19:31.96 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2007-09-11 13:19:31.98 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-09-11 13:19:32.00 Server Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-09-11 13:19:32.00 Server Database mirroring has been enabled on this instance of SQL Server.
2007-09-11 13:19:32.00 spid5s Starting up database 'master'.
2007-09-11 13:19:32.09 spid5s SQL Trace ID 1 was started by login "sa".
2007-09-11 13:19:32.10 spid5s Starting up database 'mssqlsystemresource'.
2007-09-11 13:19:32.10 spid5s The resource database build version is 9.00.3042. This is an informational message only. No user action is required.
2007-09-11 13:19:32.26 spid5s Server name is 'SS02'. This is an informational message only. No user action is required.
2007-09-11 13:19:32.26 spid9s Starting up database 'model'.
2007-09-11 13:19:32.26 spid9s Error: 17207, Severity: 16, State: 1.
2007-09-11 13:19:32.26 spid9s FCB:pen: Operating system error 5(Access is denied.) occurred while creating or opening file 'J:SQL ServerMSSQL.1MSSQLData'. Diagnose and correct the operating system error, and retry the operation.
2007-09-11 13:19:32.26 spid9s Error: 17204, Severity: 16, State: 1.
2007-09-11 13:19:32.26 spid9s FCB:pen failed: Could not open file J:SQL ServerMSSQL.1MSSQLData for file number 1. OS error: 5(Access is denied.).
2007-09-11 13:19:32.26 spid9s Error: 5120, Severity: 16, State: 101.
2007-09-11 13:19:32.26 spid9s Unable to open the physical file "J:SQL ServerMSSQL.1MSSQLData". Operating system error 5: "5(Access is denied.)".
2007-09-11 13:19:32.26 spid9s Error: 17207, Severity: 16, State: 1.
2007-09-11 13:19:32.26 spid9s FCB:pen: Operating system error 5(Access is denied.) occurred while creating or opening file 'I:SQL ServerMSSQL.1MSSQLData'. Diagnose and correct the operating system error, and retry the operation.
2007-09-11 13:19:32.26 spid9s Error: 17204, Severity: 16, State: 1.
2007-09-11 13:19:32.26 spid9s FCB:pen failed: Could not open file I:SQL ServerMSSQL.1MSSQLData for file number 2. OS error: 5(Access is denied.).
2007-09-11 13:19:32.26 spid9s Error: 5120, Severity: 16, State: 101.
2007-09-11 13:19:32.26 spid9s Unable to open the physical file "I:SQL ServerMSSQL.1MSSQLData". Operating system error 5: "5(Access is denied.)".
2007-09-11 13:19:32.26 spid9s File activation failure. The physical file name "I:SQL ServerMSSQL.1MSSQLData" may be incorrect.
2007-09-11 13:19:32.26 spid9s Error: 945, Severity: 14, State: 2.
2007-09-11 13:19:32.26 spid9s Database 'model' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
2007-09-11 13:19:32.26 spid9s Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in the event log that may indicate why the tempdb files could not be initialized.
2007-09-11 13:19:32.26 spid9s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
1) RS Start in Window Severvices
2) RS Start in Configration
1) and 2) Is Same?
I think that It looks like same Operation.
I'm using SQL Server 2012 and was attempting to move the msdb, model, and tempdb databases to a new location and accidentally gave their log files an mdf extension instead of ldf when providing the new pathfilename. After the server wouldn't start I checked my script and noticed my error. I have good backups of my system databases, so I was hoping to start the MSSQLSERVER service in single-user mode (using the -m startup parameter) and then just restore master using sqlcmd.
Unfortunately the service was starting but I couldn't connect via sqlcmd using any of the three protocols (it said the server was not found or not accessible each time). I also tried using the dedicated Admin connection but I got the same error. Then I went into the Templates folder and copied the master, msdb, model, and tempdb templates into the DATA folder and tried to restart SQL Server but still no luck (now the MSSQLSERVER service won't start at all). Is there an easy way to fix this mess without having to reinstall from the setup application?
I had a major disk failure, and the only SQL Server files I was able to recover were master.dat, msdb.dat,msdblog.dat, two text files and two database devices. My question, is it possible in SQL 6.5 to restore a database from just the database device, and if so, how? Thank you.
MH